- added svn props for newly added files

git-svn-id: svn://svn.berlios.de/openocd/trunk@610 b42882b7-edfa-0310-969c-e2dbd0fdcd60

16 files changed, 269 insertions, 269 deletions

diff --git a/src/target/interface/amontec-tiny.cfg b/src/target/interface/amontec-tiny.cfg
index aaa1cde..818c0f2 100644
--- a/src/target/interface/amontec-tiny.cfg
+++ b/src/target/interface/amontec-tiny.cfg
@@ -1,8 +1,8 @@
-#interface

-interface ft2232

-ft2232_device_desc "Amontec JTAGkey A"

-ft2232_layout jtagkey

-ft2232_vid_pid 0x0403 0xcff8

-jtag_speed 0

-jtag_nsrst_delay 200

-jtag_ntrst_delay 200

+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 0
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
diff --git a/src/target/interface/calao-usb-a9260-c01.cfg b/src/target/interface/calao-usb-a9260-c01.cfg
index e364279..f9f3994 100644
--- a/src/target/interface/calao-usb-a9260-c01.cfg
+++ b/src/target/interface/calao-usb-a9260-c01.cfg
@@ -1,11 +1,11 @@
-#

-# Calao Systems USB-A9260-C01

-#

-# http://www.calao-systems.com/

-#

-interface ft2232

-ft2232_layout jtagkey

-ft2232_device_desc "USB-A9260"

-ft2232_vid_pid 0x0403 0x6010

-script interface/calao-usb-a9260.cfg

-script target/at91sam9260minimal.cfg

+#
+# Calao Systems USB-A9260-C01
+#
+# http://www.calao-systems.com/
+#
+interface ft2232
+ft2232_layout jtagkey
+ft2232_device_desc "USB-A9260"
+ft2232_vid_pid 0x0403 0x6010
+script interface/calao-usb-a9260.cfg
+script target/at91sam9260minimal.cfg
diff --git a/src/target/interface/calao-usb-a9260-c02.cfg b/src/target/interface/calao-usb-a9260-c02.cfg
index c53c097..fddcd47 100644
--- a/src/target/interface/calao-usb-a9260-c02.cfg
+++ b/src/target/interface/calao-usb-a9260-c02.cfg
@@ -1,11 +1,11 @@
-#

-# Calao Systems USB-A9260-C02

-#

-# http://www.calao-systems.com/

-#

-interface ft2232

-ft2232_layout jtagkey

-ft2232_device_desc "USB-A9260 A"

-ft2232_vid_pid 0x0403 0x6001

-script interface/calao-usb-a9260.cfg

-script target/at91sam9260minimal.cfg

+#
+# Calao Systems USB-A9260-C02
+#
+# http://www.calao-systems.com/
+#
+interface ft2232
+ft2232_layout jtagkey
+ft2232_device_desc "USB-A9260 A"
+ft2232_vid_pid 0x0403 0x6001
+script interface/calao-usb-a9260.cfg
+script target/at91sam9260minimal.cfg
diff --git a/src/target/interface/calao-usb-a9260.cfg b/src/target/interface/calao-usb-a9260.cfg
index 69ddd79..422da9d 100644
--- a/src/target/interface/calao-usb-a9260.cfg
+++ b/src/target/interface/calao-usb-a9260.cfg
@@ -1,15 +1,15 @@
-#

-# Calao Systems USB-A9260 common -C01 -C02 setup

-#

-# http://www.calao-systems.com/

-#

-# See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg

-#

-# note: you must have an openocd version where jtag_speed sets two values

-#       trunk ver 606 contains the fix for this particular issue which can

-#      be seen if jtag_speed does not set two separate values

-#

-jtag_speed 1200 0

-jtag_nsrst_delay 200

-jtag_ntrst_delay 200

-

+#
+# Calao Systems USB-A9260 common -C01 -C02 setup
+#
+# http://www.calao-systems.com/
+#
+# See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg
+#
+# note: you must have an openocd version where jtag_speed sets two values
+#       trunk ver 606 contains the fix for this particular issue which can
+#      be seen if jtag_speed does not set two separate values
+#
+jtag_speed 1200 0
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
diff --git a/src/target/interface/str9-comstick.cfg b/src/target/interface/str9-comstick.cfg
index afece3c..8f34280 100644
--- a/src/target/interface/str9-comstick.cfg
+++ b/src/target/interface/str9-comstick.cfg
@@ -1,3 +1,3 @@
-interface ft2232

-ft2232_device_desc "STR9-comStick A"

-ft2232_layout comstick

+interface ft2232
+ft2232_device_desc "STR9-comStick A"
+ft2232_layout comstick
diff --git a/src/target/target/at91sam9260minimal.cfg b/src/target/target/at91sam9260minimal.cfg
index 662ec23..8c7f0ae 100644
--- a/src/target/target/at91sam9260minimal.cfg
+++ b/src/target/target/at91sam9260minimal.cfg
@@ -1,20 +1,20 @@
-######################################

-# Target:    Atmel AT91SAM9260

-######################################

-

-reset_config trst_and_srst

-

-#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>

-jtag_device 4 0x1 0xf 0xe

-

-jtag_nsrst_delay 200

-jtag_ntrst_delay 200

-

-######################

-# Target configuration

-######################

-

-#target <type> <endianess> <reset mode> <JTAG pos> <variant>

-target arm926ejs little reset_run 0 arm926ejs

-run_and_halt_time 0 30

-

+######################################
+# Target:    Atmel AT91SAM9260
+######################################
+
+reset_config trst_and_srst
+
+#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
+jtag_device 4 0x1 0xf 0xe
+
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+######################
+# Target configuration
+######################
+
+#target <type> <endianess> <reset mode> <JTAG pos> <variant>
+target arm926ejs little reset_run 0 arm926ejs
+run_and_halt_time 0 30
+
diff --git a/src/target/target/epc9301.cfg b/src/target/target/epc9301.cfg
index f3b5eb8..3a9d439 100644
--- a/src/target/target/epc9301.cfg
+++ b/src/target/target/epc9301.cfg
@@ -1,12 +1,12 @@
-# Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.

-jtag_device 4 0x1 0xf 0xe

-jtag_nsrst_delay 100

-jtag_ntrst_delay 100

-#target configuration

-daemon_startup attach

-#target <type> <endianess> <reset mode>

-target arm920t little reset_halt 0

-working_area 0 0x80014000 0x1000 backup

-#flash configuration

-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]

-flash bank cfi 0x60000000 0x1000000 2 2 0

+# Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
+jtag_device 4 0x1 0xf 0xe
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+#target configuration
+daemon_startup attach
+#target <type> <endianess> <reset mode>
+target arm920t little reset_halt 0
+working_area 0 0x80014000 0x1000 backup
+#flash configuration
+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
+flash bank cfi 0x60000000 0x1000000 2 2 0
diff --git a/src/target/target/ipx42x.cfg b/src/target/target/ipx42x.cfg
index 397985d..cdfb00f 100644
--- a/src/target/target/ipx42x.cfg
+++ b/src/target/target/ipx42x.cfg
@@ -1,13 +1,13 @@
-#xscale ixp42x CPU

-

-#use combined on interfaces or targets that can’t set TRST/SRST separately

-reset_config srst_only srst_pulls_trst

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 7 0x1 0x7f 0x7e

-#target configuration

-daemon_startup reset

-#target <type> <startup mode>

-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>

-target xscale big run_and_halt 0 IXP42x

-run_and_halt_time 0 30

+#xscale ixp42x CPU
+
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target xscale big run_and_halt 0 IXP42x
+run_and_halt_time 0 30
diff --git a/src/target/target/lpc2129.cfg b/src/target/target/lpc2129.cfg
index 908b251..82b3bad 100644
--- a/src/target/target/lpc2129.cfg
+++ b/src/target/target/lpc2129.cfg
@@ -1,15 +1,15 @@
-#LPC-2129 CPU

-#use combined on interfaces or targets that can’t set TRST/SRST separately

-reset_config trst_and_srst srst_pulls_trst

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 4 0x1 0xf 0xe

-#target configuration

-daemon_startup reset

-#target <type> <startup mode>

-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>

-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4

-run_and_halt_time 0 30

-working_area 0 0x40000000 0x4000 nobackup

-#flash bank <driver> <base> <size> <chip_width> <bus_width>

-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum

+#LPC-2129 CPU
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
+run_and_halt_time 0 30
+working_area 0 0x40000000 0x4000 nobackup
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
diff --git a/src/target/target/netx500.cfg b/src/target/target/netx500.cfg
index 9bb6bed..6a7d11f 100644
--- a/src/target/target/netx500.cfg
+++ b/src/target/target/netx500.cfg
@@ -1,13 +1,13 @@
-#Hilscher netX 500 CPU

-#use combined on interfaces or targets that can’t set TRST/SRST separately

-reset_config trst_and_srst

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 4 0x1 0xf 0xe

-jtag_nsrst_delay 100

-jtag_ntrst_delay 100

-#target configuration

-daemon_startup reset

-#target <type> <endianness> <startup mode> <chainpos> <variant>

-target arm926ejs little run_and_halt 0 arm926ejs

-run_and_halt_time 0 500

+#Hilscher netX 500 CPU
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+#target configuration
+daemon_startup reset
+#target <type> <endianness> <startup mode> <chainpos> <variant>
+target arm926ejs little run_and_halt 0 arm926ejs
+run_and_halt_time 0 500
diff --git a/src/target/target/omap5912.cfg b/src/target/target/omap5912.cfg
index 2c471a7..1776b42 100644
--- a/src/target/target/omap5912.cfg
+++ b/src/target/target/omap5912.cfg
@@ -1,25 +1,25 @@
-#TI OMAP5912 dual core processor - http://www.ti.com 

-#on a OMAP5912 OSK board http://www.spectrumdigital.com.

-

-#use combined on interfaces or targets that can't set TRST/SRST separately

-reset_config trst_and_srst

-

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 38 0x0 0x0 0x0

-jtag_device 4  0x1 0x0 0xe

-jtag_device 8  0x0 0x0 0x0

-

-#target configuration

-daemon_startup reset

-

-#target <type> <endianness> <reset mode> <chainpos> <variant>

-target arm926ejs little run_and_init 1 arm926ejs

-target_script 0 reset event/omap5912_reset.script

-run_and_halt_time 0 30

-

-# omap5912 lcd frame buffer as working area

-working_area 0 0x20000000 0x3e800 nobackup

-

-#flash bank <driver> <base> <size> <chip_width> <bus_width>

-flash bank cfi 0x00000000 0x1000000 2 2 0

+#TI OMAP5912 dual core processor - http://www.ti.com 
+#on a OMAP5912 OSK board http://www.spectrumdigital.com.
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 38 0x0 0x0 0x0
+jtag_device 4  0x1 0x0 0xe
+jtag_device 8  0x0 0x0 0x0
+
+#target configuration
+daemon_startup reset
+
+#target <type> <endianness> <reset mode> <chainpos> <variant>
+target arm926ejs little run_and_init 1 arm926ejs
+target_script 0 reset event/omap5912_reset.script
+run_and_halt_time 0 30
+
+# omap5912 lcd frame buffer as working area
+working_area 0 0x20000000 0x3e800 nobackup
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank cfi 0x00000000 0x1000000 2 2 0
diff --git a/src/target/target/pxa270.cfg b/src/target/target/pxa270.cfg
index 5946e75..549555d 100644
--- a/src/target/target/pxa270.cfg
+++ b/src/target/target/pxa270.cfg
@@ -1,22 +1,22 @@
-#Marvell/Intel PXA270 Script

-# set jtag_nsrst_delay to the delay introduced by your reset circuit

-# the rest of the needed delays are built into the openocd program

-jtag_nsrst_delay 260

-# set the jtag_ntrst_delay to the delay introduced by a reset circuit

-# the rest of the needed delays are built into the openocd program

-jtag_ntrst_delay 0

-#use combined on interfaces or targets that can’t set TRST/SRST separately

-reset_config trst_and_srst separate

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 7 0x1 0x7f 0x7e

-#target configuration

-daemon_startup reset

-target xscale little reset_halt 0 pxa27x

-# maps to PXA internal RAM. If you are using a PXA255

-# you must initialize SDRAM or leave this option off

-working_area 0 0x5c000000 0x10000 nobackup

-run_and_halt_time 0 30

-#flash bank <driver> <base> <size> <chip_width> <bus_width>

-# works for P30 flash

-flash bank cfi 0x00000000 0x1000000 2 4 0

+#Marvell/Intel PXA270 Script
+# set jtag_nsrst_delay to the delay introduced by your reset circuit
+# the rest of the needed delays are built into the openocd program
+jtag_nsrst_delay 260
+# set the jtag_ntrst_delay to the delay introduced by a reset circuit
+# the rest of the needed delays are built into the openocd program
+jtag_ntrst_delay 0
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst separate
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+#target configuration
+daemon_startup reset
+target xscale little reset_halt 0 pxa27x
+# maps to PXA internal RAM. If you are using a PXA255
+# you must initialize SDRAM or leave this option off
+working_area 0 0x5c000000 0x10000 nobackup
+run_and_halt_time 0 30
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+# works for P30 flash
+flash bank cfi 0x00000000 0x1000000 2 4 0
diff --git a/src/target/target/stm32stick.cfg b/src/target/target/stm32stick.cfg
index 7399ffc..37a282a 100644
--- a/src/target/target/stm32stick.cfg
+++ b/src/target/target/stm32stick.cfg
@@ -1,25 +1,25 @@
-# Hitex stm32 performance stick

-jtag_nsrst_delay 100

-jtag_ntrst_delay 100

-

-#use combined on interfaces or targets that can't set TRST/SRST separately

-reset_config trst_and_srst

-

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 4 0x1 0xf 0xe

-jtag_device 5 0x1 0x1 0x1e

-jtag_device 4 0x1 0xf 0xe

-

-#target <type> <startup mode>

-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>

-target cortex_m3 little reset_halt 0

-run_and_halt_time 0 30

-

-working_area 0 0x20000000 16384 nobackup

-

-#flash bank str7x <base> <size> 0 0 <target#> <variant>

-flash bank stm32x 0 0 0 0 0

-

-# For more information about the configuration files, take a look at:

-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger

+# Hitex stm32 performance stick
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+jtag_device 5 0x1 0x1 0x1e
+jtag_device 4 0x1 0xf 0xe
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target cortex_m3 little reset_halt 0
+run_and_halt_time 0 30
+
+working_area 0 0x20000000 16384 nobackup
+
+#flash bank str7x <base> <size> 0 0 <target#> <variant>
+flash bank stm32x 0 0 0 0 0
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
diff --git a/src/target/target/str730.cfg b/src/target/target/str730.cfg
index b3879a9..0837018 100644
--- a/src/target/target/str730.cfg
+++ b/src/target/target/str730.cfg
@@ -1,28 +1,28 @@
-#STR730 CPU

-

-#use combined on interfaces or targets that can’t set TRST/SRST separately

-#reset_config trst_and_srst srst_pulls_trst

-reset_config trst_and_srst srst_pulls_trst

-

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 4 0x1 0xf 0xe

-

-#jtag nTRST and nSRST delay

-jtag_nsrst_delay 500

-jtag_ntrst_delay 500

-

-#target configuration

-daemon_startup reset

-

-#target <type> <startup mode>

-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>

-target arm7tdmi little run_and_halt 0 arm7tdmi

-

-run_and_halt_time 0 30

-

-working_area 0 0x40000000 0x4000 nobackup

-

-#flash bank <driver> <base> <size> <chip_width> <bus_width>

-flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x

-

+#STR730 CPU
+
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+#reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#jtag nTRST and nSRST delay
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi
+
+run_and_halt_time 0 30
+
+working_area 0 0x40000000 0x4000 nobackup
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x
+
diff --git a/src/target/target/str750.cfg b/src/target/target/str750.cfg
index e6c0948..33136d8 100644
--- a/src/target/target/str750.cfg
+++ b/src/target/target/str750.cfg
@@ -1,29 +1,29 @@
-#STR750 CPU

-

-#use combined on interfaces or targets that can’t set TRST/SRST separately

-#reset_config trst_and_srst srst_pulls_trst

-reset_config trst_and_srst srst_pulls_trst

-

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 4 0x1 0xf 0xe

-

-#jtag nTRST and nSRST delay

-jtag_nsrst_delay 500

-jtag_ntrst_delay 500

-

-#target configuration

-daemon_startup reset

-

-#target <type> <startup mode>

-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>

-target arm7tdmi little run_and_halt 0 arm7tdmi

-

-run_and_halt_time 0 30

-

-working_area 0 0x40000000 0x4000 nobackup

-

-#flash bank <driver> <base> <size> <chip_width> <bus_width>

-flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x

-flash bank str7x 0x200C0000 0x00004000 0 0 0 STR75x

-

+#STR750 CPU
+
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+#reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#jtag nTRST and nSRST delay
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi
+
+run_and_halt_time 0 30
+
+working_area 0 0x40000000 0x4000 nobackup
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x
+flash bank str7x 0x200C0000 0x00004000 0 0 0 STR75x
+
diff --git a/src/target/target/str9comstick.cfg b/src/target/target/str9comstick.cfg
index f988667..9375b77 100644
--- a/src/target/target/str9comstick.cfg
+++ b/src/target/target/str9comstick.cfg
@@ -1,19 +1,19 @@
-#Hitex STR9 Comstick

-jtag_nsrst_delay 100

-jtag_ntrst_delay 100

-#use combined on interfaces or targets that can’t set TRST/SRST separately

-reset_config trst_and_srst

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 8 0x1 0x1 0xfe

-jtag_device 4 0x1 0xf 0xe

-jtag_device 5 0x1 0x1 0x1e

-#target configuration

-daemon_startup reset

-#target <type> <startup mode>

-#target arm966e <endianness> <reset mode> <chainpos> <variant>

-target arm966e little reset_halt 1 arm966e

-run_and_halt_time 0 30

-working_area 0 0x50000000 16384 nobackup

-#flash bank <driver> <base> <size> <chip_width> <bus_width>

-flash bank str9x 0x00000000 0x00080000 0 0 0

+#Hitex STR9 Comstick
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 8 0x1 0x1 0xfe
+jtag_device 4 0x1 0xf 0xe
+jtag_device 5 0x1 0x1 0x1e
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm966e <endianness> <reset mode> <chainpos> <variant>
+target arm966e little reset_halt 1 arm966e
+run_and_halt_time 0 30
+working_area 0 0x50000000 16384 nobackup
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank str9x 0x00000000 0x00080000 0 0 0