diff options
author | Tim Newsome <tim@sifive.com> | 2018-08-20 14:55:30 -0700 |
---|---|---|
committer | GitHub <noreply@github.com> | 2018-08-20 14:55:30 -0700 |
commit | 2a69f1bd2f4f4c839f246ca81084ff8ab029739b (patch) | |
tree | a1ba4209ed4aab4885901b25e2c6da625adeb682 /src/flash | |
parent | 684d7d67642ef2805e3c5c25e5183c055464213a (diff) | |
download | riscv-openocd-2a69f1bd2f4f4c839f246ca81084ff8ab029739b.zip riscv-openocd-2a69f1bd2f4f4c839f246ca81084ff8ab029739b.tar.gz riscv-openocd-2a69f1bd2f4f4c839f246ca81084ff8ab029739b.tar.bz2 |
From upstream (#286)
* flash/nor: Add support for TI CC26xx/CC13xx flash
Added cc26xx flash driver to support the TI CC26xx and CC13xx
microcontrollers. Driver is capable of determining which MCU
is connected and configures itself accordingly. Added config
files for four specific variants: CC26x0, CC13x0, CC26x2, and
CC13x2.
Note that the flash loader code is based on the sources used
to support flash in Code Composer Studio and Uniflash from TI.
Removed cc26xx.cfg file made obsolete by this patch.
Change-Id: Ie2b0f74f8af7517a9184704b839677d1c9787862
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4358
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>
* flash/nor/nrf5: remove is_erased setting and autoerase before write
Cached flash erase state in sectors[].is_erased is not reliable as running
target can change the flash.
Autoerase was issued before flash write on condition is_erased != 1
Remove autoerase completely as it is a quite non-standard feature.
Change-Id: I19bef459e6afdc4c5fcaa2ccd194cf05be8a42b6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4400
Tested-by: jenkins
* src/flash/tms470: remove testing of sectors[].is_erased state
The erase check routine checked sectors only if is_erased != 1
Check sector unconditionally.
While on it fix clang static analyzer warnings.
Change-Id: I9988615fd8530c55a9b0c54b1900f89b550345e9
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4401
Tested-by: jenkins
* tcl/target/stm32f7x: configure faster system clock in reset-init
STM32F7xx devices need faster clock for flash programming
over JTAG transport. Using reset default 16 MHz clock
resulted in lot of DAP WAITs and substantial decrease
of flashing performance.
Adapted to the restructured dap support
(see 2231da8ec4e7d7ae9b652f3dd1a7104f5a110f3f).
Change-Id: Ida6915331dd924c9c0d08822fd94c04ad408cdc5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4464
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
* flash/nor/psoc5lp: fix compile issue on GCC 8.1.0
Issue already identified by Alex https://sourceforge.net/u/alexbour/
in ticket #191 https://sourceforge.net/p/openocd/tickets/191/
src/flash/nor/psoc5lp.c:237:2: error: ‘strncpy’ output
truncated before terminating nul copying 2 bytes from a
string of the same length [-Werror=stringop-truncation]
Fix it by assigning the value to the array elements.
Change-Id: I22468e5700efa64ea48ae8cdec930c48b4a7d8fb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4563
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/arm: Add PLD command to ARM disassembler.
Updates the ARM disassembler to handle PLD (PreLoad Data) commands.
Previously handled by printing a TODO message. There are three forms of
the command: literal, register, and immediate. Simply decode based off
of the A1 encoding for the instructions in the ARM ARM. Also fixes mask
to handle PLDW commands.
Change-Id: I63bf97f16af254e838462c7cfac80f6c4681c556
Signed-off-by: James Marshall <jcmarsh@gwmail.gwu.edu>
Reviewed-on: http://openocd.zylin.com/4348
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
* mips_m4k.c: Fix build with --disable-target64
Replace PRIx64 with TARGET_PRIxADDR to avoid build problems
when --disable-target64 is used during configure.
Change-Id: I054a27a491e86c42c9386a0488194320b808ba96
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/4566
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Tim Newsome <tim@sifive.com>
* target/arm_adi_v5: sync CSW and TAR cache on apreg write
When using apreg to change AP registers CSW or TAR we get internal
cached value not valid anymore.
Reuse the setup functions for CSW and TAR to write them.
Invalidate the cached value before the call to force the write, thus
keeping original apreg behaviour.
Change-Id: Ib14fafd5e584345de94f2e983de55406c588ac1c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4565
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/arm_adi_v5: keep CSW and TAR cache updated
The call to dap_queue_ap_write() can fail and the value in CSW and
TAR becomes unknown.
Invalidate the OpenOCD cache if dap_queue_ap_write() fails.
Change-Id: Id6ec370b4c5ad07e454464780c1a1c8ae34ac870
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4564
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* tcl/target: Add Renesas R-Car R8A7794 E2 target
Add configuration for the Renesas R-Car R8A7794 E2 target.
This is an SoC with two Cortex A7 ARMv7a cores, both A7
cores are supported.
Change-Id: Ic1c81840e3bfcef8ee1de5acedffae5c83612a5e
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4531
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* tcl/board: Add Renesas R-Car R8A7790 H2 Stout board
Add configuration for the Renesas R-Car R8A7790 H2
based Stout ADAS board.
Change-Id: Ib880b5d2e1fab5c8c0bc0dbcedcdce8055463fe2
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4497
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* tcl/board: Add Renesas R-Car R8A7791 M2W Porter board
Add configuration for the Renesas R-Car R8A7791 M2W
based Porter evaluation board.
Change-Id: Iaadb18f29748f890ebb68519ea9ddbd18e7649af
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4498
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* tcl/board: Add Renesas R-Car R8A7794 E2 Silk board
Add configuration for the Renesas R-Car R8A7794 E2
based Silk evaluation board.
Change-Id: I504b5630b1a2791ed6967c6c2af8851ceef9723f
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
NOTE: This requires SW7[1] in position 1 (default is 0)
Reviewed-on: http://openocd.zylin.com/4532
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* tcl/board: Factor out common R-Car Gen2 code
Factor out the code shared by all R-Car Gen2 boards into a single
file to get rid of the duplication.
Change-Id: I70b302c2e71f4e6fdccb2817dd65a5493bb393d8
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4533
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* jtag/drivers/cmsis-dap: fix connect in cmsis_dap_swd_switch_seq()
The proc cmsis_dap_swd_switch_seq() is part of the SWD API for
this interface driver. It is valid only when the interface is
used in SWD mode.
In this proc there is the need to call, in sequence, first
cmsis_dap_cmd_DAP_Disconnect() then cmsis_dap_cmd_DAP_Connect().
The latter call requires the connection mode as parameter, that
inside cmsis_dap_swd_switch_seq() can only be CONNECT_SWD.
The current implementation is not correct and in some cases can
pass mode CONNECT_JTAG. Moreover, JTAG is optional in CMSIS-DAP
and passing mode CONNECT_JTAG triggers an error with SWD-only
interfaces.
Use mode CONNECT_SWD in SWD specific cmsis_dap_swd_switch_seq().
Change-Id: Ib455bf5b69cb2a2d146a6c8875387b00c27a5690
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4571
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/cortex_m: return error if breakpoint address is out of range
If the "Flash Patch and Breakpoint" unit is rev.1 then it can only
accept breakpoint addresses below 0x1FFFFFFF.
Detailed info in "ARM v7-M Architecture Reference Manual", DDI0403E
at chapter "C1.11 Flash Patch and Breakpoint unit".
Print a message and return error if the address of hardware
breakpoint cannot be handled by the breakpoint unit.
Change-Id: I95c92b1f058f0dfc568bf03015f99e439b27c59b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4535
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
* flash/nor/stm32: Report errors in wait_status_busy
Flash operation errors that occur during algorithm programming are
reported via the algorithm return value. However, Flash operation
errors that occur during non-algorithm work (erasing, programming
without a work area, programming the last non-multiple-of-32-bytes on
an H7, etc.) generally end with a call to stm32x_wait_status_busy,
which reads the status register and clears the error flags but fails
to actually report that something went wrong should an error flag
(other than WRPERR) be set. Return an error status from
stm32x_wait_status_busy in those cases. Correct a log message
accordingly.
Change-Id: I09369ea5f924fe58833aec1f45e52320ab4aaf43
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4519
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* flash/nor/stm32: Eliminate working area leak
On a specific early-return path, an allocated working area was not
freed. Free it.
Change-Id: I7c8fe51ff475f191624086996be1c77251780b77
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4520
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* flash/nor/stm32h7: Fix incorrect comment
The name of the bit according to the reference manual is inconsistency
error, not increment error.
Change-Id: Ie3b73c0312db586e35519e03fd1a5cb225673d97
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4521
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* target: fix 'bp' command help message
"asid" and "length" are separate arguments of the command.
Put space between them.
Change-Id: I36cfc1e3a01caafef4fc3b26972a0cc192b0b963
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4511
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* Add ARM v8 AArch64 semihosting support
This patch implements semihosting support for AArch64. This picks
code from previously submitted AArch64 semihosting support patch
and rebases on top of reworked semihosting code. Tested in AArch64
mode on a Lemaker Hikey Board with NewLib and GDB.
Change-Id: I228a38f1de24f79e49ba99d8514d822a28c2950b
Signed-off-by: Omair Javaid <omair.javaid@linaro.org>
Reviewed-on: http://openocd.zylin.com/4537
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* GDB fileIO stdout support
This patch fixes gdb fileio support to allow gdb console to be used as stdout.
Now we can do something like
gdb <inferior file>
(gdb) tar ext :3333
(gdb) load
(gdb) monitor arm semihosting enable
(gdb) monitor arm semihosting_fileio enable
(gdb) continue
Here: Output from inferior using puts, printf etc will be routed to gdb console.
Change-Id: I9cb0dddda1de58038c84f5b035c38229828cd744
Signed-off-by: Omair Javaid <omair.javaid@linaro.org>
Reviewed-on: http://openocd.zylin.com/4538
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* target: armv8: Avoid semihosting segfault on halt
Avoid a NULL pointer dereference when halting an aarch64 core.
Change-Id: I333d40475ab26e2f0dca5c27302a5fa4d817a12f
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/4593
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* tcl: target: Add NXP LS1012A config
As seen on the FRDM-LS1012A board.
Change-Id: Ifc9074b3f7535167b9ded5f544501ec2879f5db7
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/4594
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* tcl: board: Add NXP Freedom FRDM-LS1012A config
An update for the K20 CMSIS-DAP firmware can be found here:
https://community.nxp.com/thread/387080?commentID=840141#comment-840141
Change-Id: I149d7f8610aa56daf1aeb95f14ee1bf88f7cb647
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/4595
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* gdb_server: only trigger once the event gdb-detach at gdb quit
When GDB quits (e.g. with "quit" command) we first execute
gdb_detach() to reply "OK" then, at GDB disconnect (either TCP
or pipe connection type), we execute gdb_connection_closed().
In case GDB is killed or it crashes, OpenOCD only executes the
latter when detects the disconnection.
Both gdb_detach() and gdb_connection_closed() trigger the event
TARGET_EVENT_GDB_DETACH thus getting it triggered twice on clean
GDB quit.
Do not trigger the event TARGET_EVENT_GDB_DETACH in gdb_detach()
and let only gdb_connection_closed() to handle it.
Change-Id: Iacf035c855b8b3e2239c1c0e259c279688b418ee
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4585
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* gdb_server: set current_target from connection's one
In a multi-target environment we are supposed to have a single
gdb server for each target (or for each group of targets within
a SMP node).
By default, the gdb attached to a server sends its command to
the target (or to the SMP node targets) linked to that server.
This is working fine for the normal gdb commands, but it is
broken for the native OpenOCD commands executed through gdb
"monitor" command. In the latter case, gdb "monitor" commands
will be executed on the current target of OpenOCD configuration
script (that is either the last target created or the target
specified in a "targets" command).
Fixed in gdb_new_connection() by replacing the current target
in the connection's copy of command context.
Change-Id: If7c8f2dce4a3138f0907d3000dd0b15e670cfa80
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4586
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
* target/image: make i/j unsigned to avoid ubsan runtime error
src/target/image.c:1055:15: runtime error: left shift of 128 by 24 places cannot be represented in type 'int'
Change-Id: I322fd391cf3f242beffc8a274824763c8c5e69a4
Signed-off-by: Cody Schafer <openocd@codyps.com>
Reviewed-on: http://openocd.zylin.com/4584
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
* target/stm32f7x: Clear stuck HSE clock with CSS
Change-Id: Ica0025ea465910dd664ab546b66f4f25b271f1f5
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4570
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
* psoc5lp: fix erase check, add free_driver_priv
psoc5lp_erase_check() was not properly adapted to the new
armv7m_blank_check_memory() in the hot fix 53376dbbede4f0bf42e724ff
This change fixes handling of num_sectors in dependecy of ecc_enabled.
Also add comments how ecc_enabled influences num_sectors.
Add pointer to default_flash_free_driver_priv() to all psoc5lp flash
drivers to keep valgrind happy.
Change-Id: Ie1806538becd364fe0efb7a414f0fe6a84b2055b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4569
Tested-by: jenkins
* target: atmel samd10 xplained mini
cortex m0+ on a tiny board, with an mEDBG (CMSIS-DAP) debug interface.
Change-Id: Iaedfab578b4eb4aa2d923bd80f220f59b34e6ef9
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3402
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* tcl/board: add SAMD11 Xplained Pro evaluation board
Change-Id: Id996c4de6dc9f25f71424017bf07689fea7bd3af
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/4507
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* Adds SAMD11D14AU flash support.
Corrects names of SAMD11D14AM and SAMD11D14ASS per datasheet.
Change-Id: I8beb15d5376966a4f8d7de76bfb2cbda2db440dc
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
Reviewed-on: http://openocd.zylin.com/4597
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* nds32: Avoid detected JTAG clock
AICE2 doesn't support scan for the maximum clock frequency of
JTAG chain. It will cause USB command timeout.
Change-Id: I41d1e3be387b6ed5a4dd0be663385a5f053fbcf9
Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com>
Reviewed-on: http://openocd.zylin.com/4292
Tested-by: jenkins
Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* flash/nor/tcl: Distinguish between sectors and blocks in status messages
Use the right word in flash protect command status messages based on
whether the target bank defines num_prot_blocks. Minor message style
tidy-up.
Change-Id: I5f40fb5627422536ce737f242fbf80feafe7a1fc
Signed-off-by: Dominik Peklo <dom.peklo@gmail.com>
Reviewed-on: http://openocd.zylin.com/4573
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
* drivers: cmsis-dap: pull up common connect code
Just a minor deduplication
Change-Id: Idd256883e5f6d4bd4dcc18462dd5468991f507b3
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3403
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* drivers: cmsis-dap: Print version info when available
No need to wait until after connecting, might help diagnose part information by
printing earlier.
Change-Id: I51eb0d584be306baa811fbeb1ad6a604773e602c
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3404
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* flash/nor: add support for TI MSP432 devices
Added msp432 flash driver to support the TI MSP432P4x and
MSP432E4x microcontrollers. Implemented the flash algo
helper as used in the TI debug and flash tools. This
implemention supports the MSP432E4, Falcon, and Falcon 2M
variants. The flash driver automatically detects the
connected variant and configures itself appropriately.
Added command to mass erase device for consistency with
TI tools and added command to unlock the protected BSL
region.
Tested using MSP432E401Y, MSP432P401R, and MSP432P4111
LaunchPads.
Tested with embedded XDS110 debug probe in CMSIS-DAP
mode and with external SEGGER J-Link probe.
Removed ti_msp432p4xx.cfg file made obsolete by this
patch.
Change-Id: I3b29d39ccc492524ef2c4a1733f7f9942c2684c0
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4153
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* flash/nor/at91sam4: fix sam4sa16c flash banks and its gpnvms count
There was already a github fork that had this fixed, but as we try
to use the latest, non-modified version of all software we use,
I would like to have this fix in the next releases of OpenOCD so
that if people uses $packagemanager, they will not have issues flashing
the last part of the flash of sam4sa16c chips.
Additionally, I've added some more logging related to the flash
bank that was used, and the chip ID that was detected.
Change-Id: I7ea5970105906e4560b727e46222ae9a91e41559
Signed-off-by: Erwin Oegema <blablaechthema@hotmail.com>
Reviewed-on: http://openocd.zylin.com/4599
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
* flash/nor/stm32lx: Add revision 'V' for STM32L1xx Cat.3 devices
Change-Id: Ic92b0fb5b738af3bec79ae335876aa9e26f5f4cd
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4600
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Avoid null target->semihosting references.
The new common semihosting code introduced a bug,
in certain conditions target->semihosting was
used without semihosting being initialised.
The solution was to explicitly test for
target->semihosting before dereferencing it.
Change-Id: I4c83e596140c68fe4ab32e586e51f7e981a40798
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/4603
Tested-by: jenkins
Reviewed-by: Jonathan Larmour <jifl@eCosCentric.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* nrf5: Add HWID 0x139 (52832 rev E0)
Change-Id: I71b7471ccfcb8fcc6de30da57ce4165c7fb1f73f
Signed-off-by: James Jacobsson <slowcoder@gmail.com>
Reviewed-on: http://openocd.zylin.com/4604
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target: Fix segfault for 'mem2array'
Call 'mem2array' without arguments to reproduce the segmentation
fault.
Change-Id: I02bf46cc8bd317abbb721a8c75d7cbfac99eb34e
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4534
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Christopher Head <chead@zaber.com>
* target/armv7m_trace: Fix typo in enum
Change-Id: I6364ee5011ef2d55c59674e3b97504a285de0cb2
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/3904
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* target/armv7m_trace: Use prefix for enums
Change-Id: I3f199e6053146a1094d96b98ea174b41bb021599
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/3905
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* target/aarch64: Call aarch64_init_debug_access() earlier in aarch64_deassert_reset()
On Renesas R-Car, calling 'reset halt' and 'reset init' always made DAP inaccessible. Calling 'reset' and 'halt' seperatly worked fine.
The only differences seems to be the point in time when aarch64_init_debug_access() is called. This patch aligns the behaviour.
Change-Id: I2296c65e48414a7d9846f12a395e5eca315b49ca
Signed-off-by: Dennis Ostermann <dennis.ostermann@renesas.com>
Reviewed-on: http://openocd.zylin.com/4607
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* server: Improve signal handling under Linux
Commit 5087a955 added custom signal handlers for the openocd
server process.
Before this commit, when openocd is run as a background process
having the same controlling terminal as gdb, Control-C would be
handled by gdb to stop target execution and return to the gdb prompt.
However, after commit 5087a955, the SIGINT caused by pressing
Control-C also terminates openocd, effectively crashing the
debugging session. The only way to avoid this is run openocd in
a different controling terminal or to detach openocd from its
controlling terminal,
thus losing all job control for the openocd process.
This patch improves the server's handling of POSIX signals:
1) Keyboard generated signals (INT and QUIT) are ignored
when server process has is no controlling terminal.
2) SIGHUP and SIGPIPE are handled to ensure that .quit functions
for each interface are called if user's logs out of X
session or there is a network failure.
SIG_INT & SIG_QUIT still stop openocd
when it is running in the foreground.
Change-Id: I03ad645e62408fdaf4edc49a3550b89b287eda10
Signed-off-by: Brent Roman <genosensor@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3963
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* armv7a: read ttbcr and ttb0/1 at every entry in debug state
Commit bfc5c764df145f68835543119865eabe462e19c2 avoids reading
ttbcr and ttb0/1 at every virt2phys translation by caching them,
and it updates the cached values in armv7a_arch_state().
But the purpose of any (*arch_state)() method, thus including
armv7a_arch_state(), is to only print out and inform the user
about some architecture specific status.
Moreover, to reduce the verbosity during a GDB session, the
method (*arch_state)() is not executed anymore at debug state
entry (check use of target->verbose_halt_msg in src/openocd.c),
thus the state of translation table gets out-of-sync triggering
Error: Address translation failure
or even using a wrong address in the memory R/W operation.
In addition, the commit above breaks the case of armv7r by
calling armv7a_read_ttbcr() unconditionally.
Fixed by moving in cortex_a_post_debug_entry() the call to
armv7a_read_ttbcr() on armv7a case only.
Remove the call to armv7a_read_ttbcr() in armv7a_identify_cache()
since it is (conditionally) called only in the same procedure
cortex_a_post_debug_entry().
Fixes: bfc5c764df14 ("armv7a: cache ttbcr and ttb0/1 on debug
state entry")
Change-Id: Ifc20eca190111832e339a01b7f85d28c1547c8ba
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4601
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* Avoid dereferencing NULL pointer.
If a NULL pointer is passed, don't attempt to increment it. This avoids
passing the now not-NULL pointer on and eventually segfaulting. Also
remove some unnecessary temporary variables.
Change-Id: I268e225121aa283d59179bfae407ebf6959d3a4e
Signed-off-by: Darius Rad <darius@bluespec.com>
Reviewed-on: http://openocd.zylin.com/4550
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
* Remove FSF mailing address.
Checkpatch complains about this (FSF_MAILING_ADDRESS).
Change-Id: Ib46a7704f9aed4ed16ce7733d43c58254a094149
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4559
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* drivers: cmsis_dap_usb: implement cmd JTAG_TMS
Simply add a wrapper around cmsis_dap_cmd_DAP_SWJ_Sequence()
Change-Id: Icf86f84b24e9fec56e2f9e155396aac34b0e06d2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4517
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
* arm_adi_v5: put SWJ-DP back to JTAG mode at exit
When SWD mode is used, current OpenOCD code left the SWJ-DP in
SWD mode at exit. Also, current code is unable to switch back the
SWJ-DP in JTAG at next run, thus a power cycle of both target and
interface is required in order to run OpenOCD in JTAG mode again.
Put the SWJ-DP back to JTAG mode before exit from OpenOCD.
Use switch_seq(SWD_TO_JTAG) instead of dap_to_jtag(), because the
latter is not implemented on some interfaces. This is aligned
with the use of switch_seq(JTAG_TO_SWD) in swd_connect().
Change-Id: I55d3faebe60d6402037ec39dd9700dc5f17c53b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4493
Tested-by: jenkins
Reviewed-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* Add RISC-V support.
This supports both 0.11 and 0.13 versions of the debug spec.
Support for `-rtos riscv` will come in a separate commit since it was
easy to separate out, and is likely to be more controversial.
Flash support for the SiFive boards will also come in a later commit.
Change-Id: I1d38fe669c2041b4e21a5c54a091594aac3e2190
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4578
Tested-by: jenkins
Reviewed-by: Liviu Ionescu <ilg@livius.net>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* usb_blaster: Don't unnecessarily go through DR-/IR-Pause
There is no need to pass through DR-/IR-Pause after a scan if we want to
go to DR-/IR-Update. We just have to skip the first step of the path to
the end state because we already did that step when shifting the last
bit.
v2:
- Fix comments as remarked in review of v1
Change-Id: I3c10f02794b2233f63d2150934e2768430873caa
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Reviewed-on: http://openocd.zylin.com/4245
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* cortex_a: fix virt2phys when mmu is disabled
When the MMU is not enabled on debug state entry, virt2phys cannot
perform a translation since it is unknown whether a valid MMU
configuration existed before. In this case, return the virtual
address as physical address.
Change-Id: I6f85a7a5dbc200be1a4b5badf10a1a717f1c79c0
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4480
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* drivers: cmsis-dap: print serial if available
Helpful for sanity checking connections
Change-Id: Ife0d8b4e12d4c03685aac8115c9739a4c1e994fe
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3405
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/cortex_m: make a variable local
The vec_ids variable is not referenced anywhere other than the vector
catch command handler. Make it local to that function.
Change-Id: Ie5865e8f78698c19a09f0b9d58269ced1c9db440
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4606
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/cortex_a: fix compile error for uninitialized variable
Commit ad6c71e151590f9d07eb07eda978a8d2a845259c introduced the
variable "mmu_enabled" whose pointer is passed to cortex_a_mmu()
that initialises it.
This initialization is not visible to the compiler that issue
a compile error.
The same situation is common across the same file and the usual
workaround is to initialize it to zero; thus the same fix i
applied here.
Ticket: https://sourceforge.net/p/openocd/tickets/197/
Fixes: commit ad6c71e15159 ("cortex_a: fix virt2phys when mmu is disabled")
Change-Id: I77dec41acdf4c715b45ae37b72e36719d96d9283
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4619
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* mips_m4k: add optional reset handler
In some cases by using SRST we can't halt CPU early enough. And
option PrRst is not available too. In this case the only way is
to set BOOT flag over EJTAG and reset CPU or SoC from CPU itself.
For example by writing to some reset register.
This patch is providing possibility to use user defined reset-assert
handler which will be enabled only in case SRST is disabled. It is
needed to be able switch between two different reset variants on run
time.
Change-Id: I6ef98f1871ea657115877190f7cc7a5e8f3233e4
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4404
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* tcl/target: add config for Qualcomm QCA4531
The QCA4531 is a two stream (2x2) 802.11b/g/n single-band programmable
Wi-Fi System-on-Chip (SoC) for the Internet of Things (IoT).
https://www.qualcomm.com/products/qca4531
Change-Id: I58398c00943b005cfaf0ac1eaad92d1fa4e2cba7
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4405
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* tcl/board: add config for 8devices LIMA board
More information about this board can be found here:
https://www.8devices.com/products/lima
Change-Id: Id35a35d3e986630d58d37b47828870afd107cc6a
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4406
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* tcl/target|board: move common AR9331 code to atheros_ar9331.cfg
The ar9331_25mhz_pll_init and ar9331_ddr1_init routines
can be used not only for TP-Link MR3020 board,
so move them to the common atheros_ar9331.cfg file.
Change-Id: I04090856b08151d6bb0f5ef9cc654efae1c81835
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2999
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* tcl/target/atheros_ar9331: add DDR2 helper
this helper works on many different boards, so it is
good to have it in target config
Change-Id: I068deac36fdd73dbbcedffc87865cc5b9d992c1d
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4422
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* tcl/target/atheros_ar9331: add documentation and extra helpers
Sync it with experience gathered on Qualcomm QCA4531 SoC. This
chips are in many ways similar.
Change-Id: I06b9c85e5985a09a9be3cb6cc0ce3b37695d2e54
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4423
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* tcl/board: add DPTechnics DPT-Board-v1
it is Atheros AR9331 based IoT dev board.
Change-Id: I6fc3cdea1bef49c53045018ff5acfec4d5610ba6
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4424
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* fpga/altera-10m50: add all device id
add all currently know Intel (Alter) MAX 10 device ids
Change-Id: I6a88fef222c8e206812499d41be863c3d89fa944
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4598
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* target|board: Add Intel (Altera) Arria 10 target and related board
Target information about this SoC can be found here:
https://www.altera.com/products/fpga/arria-series/arria-10/overview.html
Achilles Instant-Development Kit Arria 10 SoC SoM:
https://www.reflexces.com/products-solutions/development-kits/arria-10/achilles-instant-development-kit-arria-10-soc-som
Change-Id: Id78c741be6a8b7d3a70f37d41088e47ee61b437a
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4583
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* target/riscv: fix compile error with gcc 8.1.1
Fix compile error:
src/target/riscv/riscv-011.c: In function ‘slot_offset’:
src/target/riscv/riscv-011.c:238:4: error: this statement may fall through
[-Werror=implicit-fallthrough=]
switch (slot) {
^~~~~~
src/target/riscv/riscv-011.c:243:3: note: here
case 64:
^~~~
Fixes: a51ab8ddf63a ("Add RISC-V support.")
Change-Id: I7fa86b305bd90cc590fd4359c3698632d44712e5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4618
Tested-by: jenkins
Reviewed-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* server: explicitly call "shutdown" when catch CTRL-C or a signal
Every TCL command can be renamed (or deleted) and then replaced by
a TCL proc that has the same name of the original TCL command.
This can be used either to completely replace an existing command
or to wrap the original command to extend its functionality.
This applies also to the OpenOCD command "shutdown" and can be
useful, for example, to set back some default value to the target
before quitting OpenOCD.
E.g. (TCL code):
rename shutdown original_shutdown
proc shutdown {} {
puts "This is my implementation of shutdown"
# my own stuff before exit OpenOCD
original_shutdown
}
Unfortunately, sending a signal (or pressing CTRL-C) to terminate
OpenOCD doesn't trigger calling the original "shutdown" command
nor its (eventual) replacement.
Detect if the main loop is terminated by an external signal and
in such case execute explicitly the command "shutdown".
Replace with enum the magic numbers assumed by "shutdown_openocd".
Please notice that it's possible to write a custom "shutdown" TCL
proc that does not call the original "shutdown" command. This is
useful, for example, to prevent the user to quit OpenOCD by typing
"shutdown" in the telnet session.
Such case will not prevent OpenOCD to terminate when receiving a
signal; OpenOCD will quit after executing the custom "shutdown"
command.
Change-Id: I86b8f9eab8dbd7a28dad58b8cafd97caa7a82f43
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4551
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* zy1000: fix compile error with gcc 8.1.1
The fall-through comment is not taken in consideration by gcc 8.1.1
because it is inside the braces of a C-code block.
Move the comment outside the C block.
Change-Id: I22d87b2dee109fb8bcf2071ac55fdf7171ffcf4b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4614
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* flash/nor/tcl.c: fix flash bank bounds check in 'flash fill' command handler
Steps to reproduce ( STM32F103 'Blue Pill', 128KiB of flash ):
> flash fillh 0x0801FFFE 00 1
wrote 2 bytes to 0x0801fffe in 0.019088s (0.102 KiB/s)
> flash fillw 0x0801FFFE 00 1
Error: stm32f1x.cpu -- clearing lockup after double fault
Error: error waiting for target flash write algorithm
Error: error writing to flash at address 0x08000000 at offset 0x0001fffe
Change-Id: I145092ec5e45bc586b3df48bf37c38c9226915c1
Signed-off-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-on: http://openocd.zylin.com/4516
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/arm_adi_v5: add command "dpreg"
For very low level debug or development around DAP, it is useful
to have direct access to DP registers.
Add command "dpreg" by mimic the syntax of the existing "apreg"
command:
$dap_name dpreg reg [value]
Change-Id: Ic4ab451eb5e74453133adee61050b4c6f656ffa3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4612
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* nrf5: add free_driver_priv
Change-Id: I429a9868deb0c4b51f47a4bbad844bdc348e8d21
Signed-off-by: Jim Paris <jim@jtan.com>
Reviewed-on: http://openocd.zylin.com/4608
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* rtos: add support for NuttX
This patch introduces RTOS support for NuttX. Currently,
only ARM Cortex-M (both FPU and FPU-less) targets are supported.
To use, add the following lines to ~/.gdbinit.
define hookpost-file
eval "monitor nuttx.pid_offset %d", &((struct tcb_s *)(0))->pid
eval "monitor nuttx.xcpreg_offset %d", &((struct tcb_s *)(0))->xcp.regs
eval "monitor nuttx.state_offset %d", &((struct tcb_s *)(0))->task_state
eval "monitor nuttx.name_offset %d", &((struct tcb_s *)(0))->name
eval "monitor nuttx.name_size %d", sizeof(((struct tcb_s *)(0))->name)
end
And please make sure the above values are the same as in
src/rtos/nuttx_header.h
Change-Id: I2aaf8644d24dfb84b500516a9685382d5d8fe48f
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Signed-off-by: Masatoshi Tateishi <Masatoshi.Tateishi@jp.sony.com>
Signed-off-by: Nobuto Kobayashi <Nobuto.Kobayashi@sony.com>
Reviewed-on: http://openocd.zylin.com/4103
Tested-by: jenkins
Reviewed-by: Alan Carvalho de Assis <acassis@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* server/server: Add ability to remove services
Add the ability to remove services while OpenOCD is running.
Change-Id: I4067916fda6d03485463fa40901b40484d94e24e
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4054
Tested-by: jenkins
Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/cortex_m: fix incorrect comment
The code sets C_MASKINTS if that bit is not already set (correctly). Fix
the comment to agree.
Change-Id: If4543e2660a9fa2cdabb2d2698427a6c8d9a274c
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4620
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* tcl/target/stm32f0x: Allow overriding the Flash bank size
Copy & paste from another stm32 target.
Change-Id: I0f6cbcec974ce70c23c1850526354106caee1172
Signed-off-by: Dominik Peklo <dom.peklo@gmail.com>
Reviewed-on: http://openocd.zylin.com/4575
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* tcl/target: add Allwinner V3s SoC support
Change-Id: I2459d2b137050985b7301047f9651951d72d9e9e
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4427
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
* target/arm_adi_v5: allow commands apsel and apcsw during init phase
The current implementation of apsel cannot be executed during the
initialization phase because it queries the DAP AP to retrieve and
print the content of IDR register, and the query is only possible
later on during the exec phase.
But IDR information is already printed by the dedicated command
apid, making redundant printing it by apsel too.
Being unable to run apsel during initialization, makes also apcsw
command (that depends on apsel) not usable in such phase.
Modify the command apsel to only set the current AP, without making
any transfer to the (possibly not initialized yet) DAP. When run
without parameters, just print the current AP number.
Change mode to COMMAND_ANY to apsel and to apcsw.
Change-Id: Ibea6d531e435d1d49d782de1ed8ee6846e91bfdf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4624
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/cortex_a: allow command dacrfixup during init phase
There is no reason to restrict the command "cortex_a dacrfixup"
to the EXEC phase only.
Change the command mode to ANY so the command can be used in
the initialization phase too.
Change-Id: I498cc6b2dbdc48b3b2dd5f0445519a51857b295f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4623
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* target/armv7a_cache: add gdb keep-alive and fix a missing dpm finish
Depending on range size, the loop on cache operations can take quite
some time, causing gdb to timeout.
Add keep-alive to prevent gdb to timeout.
Add also a missing dpm->finish() to balance dpm->prepare().
Change-Id: Ia87934b1ec19a0332bb50e3010b582381e5f3685
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4627
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
* Add detail to `wrong register size` error.
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: Id31499c94b539969970251145e42c89c943fd87c
Reviewed-on: http://openocd.zylin.com/4577
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* doc: fix typo in cortex_m maskisr command
Change-Id: I37795c320ff7cbf6f2c7434e03b26dbaf6fc6db4
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4621
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/cortex_m: restore C_MASKINTS after reset
The cortex_m maskisr user-facing setting is not changed across a target
reset. However, the in-core C_MASKINTS bit was always cleared as part of
reset processing, meaning that a cortex_m maskisr on setting would not
be respected after a reset. Set C_MASKINTS based on the user-facing
setting value rather than always clearing it after reset.
Change-Id: I5aa5b9dfde04a0fb9c6816fa55b5ef1faf39f8de
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4605
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* tcl/board: update all uses of interface/stlink-v2-1 to interface/stlink
Change-Id: I5e27e84d022f73101376e8b4a1bdc65f58fd348a
Signed-off-by: Cody P Schafer <openocd@codyps.com>
Reviewed-on: http://openocd.zylin.com/4456
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* target/riscv/riscv-011: fix compile warning about uninitialized variable
In MSYS2 MinGW 64-bit
git clone git://git.code.sf.net/p/openocd/code openocd
$ gcc --version
gcc.exe (Rev1, Built by MSYS2 project) 8.2.0
./bootstrap
./configure --prefix=
$ cat config.status | grep CFLAGS
CFLAGS='-g -O2'
make bindir = "bin-x64"
depbase=`echo src/target/riscv/riscv-011.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -D__USE_MINGW_ANSI_STDIO -I./src -I./src -I./src/helper -DPKGDATADIR=\"/mingw64/share/openocd\" -DBINDIR=\"bin-x64\" -I./jimtcl -I./jimtcl -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -g -O2 -MT src/target/riscv/riscv-011.lo -MD -MP -MF $depbase.Tpo -c -o src/target/riscv/riscv-011.lo src/target/riscv/riscv-011.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: gcc -DHAVE_CONFIG_H -I. -D__USE_MINGW_ANSI_STDIO -I./src -I./src -I./src/helper -DPKGDATADIR=\"/mingw64/share/openocd\" -DBINDIR=\"bin-x64\" -I./jimtcl -I./jimtcl -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -g -O2 -MT src/target/riscv/riscv-011.lo -MD -MP -MF src/target/riscv/.deps/riscv-011.Tpo -c src/target/riscv/riscv-011.c -o src/target/riscv/riscv-011.o
src/target/riscv/riscv-011.c: In function 'poll_target':
src/target/riscv/riscv-011.c:1799:6: error: 'reg' may be used uninitialized in this function [-Werror=maybe-uninitialized]
reg_cache_set(target, reg, ((data & 0xffffffff) << 32) | value);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/target/riscv/riscv-011.c:1686:17: note: 'reg' was declared here
unsigned int reg;
^~~
cc1.exe: all warnings being treated as errors
make[2]: *** [Makefile:3250: src/target/riscv/riscv-011.lo] Error 1
Change-Id: I6996dcb866fbace26817636f4bedba09510a087f
Signed-off-by: Svetoslav Enchev <svetoslav.enchev@gmail.com>
Reviewed-on: http://openocd.zylin.com/4635
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Diffstat (limited to 'src/flash')
-rw-r--r-- | src/flash/nor/Makefile.am | 6 | ||||
-rw-r--r-- | src/flash/nor/at91sam4.c | 81 | ||||
-rw-r--r-- | src/flash/nor/at91samd.c | 5 | ||||
-rw-r--r-- | src/flash/nor/cc26xx.c | 567 | ||||
-rw-r--r-- | src/flash/nor/cc26xx.h | 101 | ||||
-rw-r--r-- | src/flash/nor/drivers.c | 4 | ||||
-rw-r--r-- | src/flash/nor/msp432.c | 1103 | ||||
-rw-r--r-- | src/flash/nor/msp432.h | 127 | ||||
-rw-r--r-- | src/flash/nor/nrf5.c | 75 | ||||
-rw-r--r-- | src/flash/nor/psoc5lp.c | 34 | ||||
-rw-r--r-- | src/flash/nor/stm32f1x.c | 4 | ||||
-rw-r--r-- | src/flash/nor/stm32f2x.c | 6 | ||||
-rw-r--r-- | src/flash/nor/stm32h7x.c | 10 | ||||
-rw-r--r-- | src/flash/nor/stm32l4x.c | 6 | ||||
-rw-r--r-- | src/flash/nor/stm32lx.c | 2 | ||||
-rw-r--r-- | src/flash/nor/tcl.c | 58 | ||||
-rw-r--r-- | src/flash/nor/tms470.c | 36 |
17 files changed, 2056 insertions, 169 deletions
diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index db936b8..9a58239 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -20,6 +20,7 @@ NOR_DRIVERS = \ %D%/avrf.c \ %D%/bluenrg-x.c \ %D%/cc3220sf.c \ + %D%/cc26xx.c \ %D%/cfi.c \ %D%/dsp5680xx_flash.c \ %D%/efm32.c \ @@ -36,6 +37,7 @@ NOR_DRIVERS = \ %D%/lpc2900.c \ %D%/lpcspifi.c \ %D%/mdr.c \ + %D%/msp432.c \ %D%/mrvlqspi.c \ %D%/niietcm4.c \ %D%/non_cfi.c \ @@ -67,9 +69,11 @@ NOR_DRIVERS = \ NORHEADERS = \ %D%/core.h \ %D%/cc3220sf.h \ + %D%/cc26xx.h \ %D%/cfi.h \ %D%/driver.h \ %D%/imp.h \ %D%/non_cfi.h \ %D%/ocl.h \ - %D%/spi.h + %D%/spi.h \ + %D%/msp432.h diff --git a/src/flash/nor/at91sam4.c b/src/flash/nor/at91sam4.c index 0475216..c5b31e9 100644 --- a/src/flash/nor/at91sam4.c +++ b/src/flash/nor/at91sam4.c @@ -682,6 +682,40 @@ static const struct sam4_chip_details all_sam4_details[] = { }, }, }, + /*at91sam4sa16c - TFBGA100/VFBGA100/LQFP100*/ + { + .chipid_cidr = 0x28a70ce0, + .name = "at91sam4sa16c", + .total_flash_size = 1024 * 1024, + .total_sram_size = 160 * 1024, + .n_gpnvms = 2, + .n_banks = 1, + +/* .bank[0] = { */ + { + { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK_BASE_S, + .controller_address = 0x400e0a00, + .flash_wait_states = 5, + .present = 1, + .size_bytes = 1024 * 1024, + .nsectors = 128, + .sector_size = 8192, + .page_size = 512, + }, +/* .bank[1] = {*/ + { + .present = 0, + .probed = 0, + .bank_number = 1, + + }, + }, + }, /*atsam4s16b - LQFP64/QFN64/WLCSP64*/ { .chipid_cidr = 0x289C0CE0, @@ -1261,50 +1295,6 @@ static const struct sam4_chip_details all_sam4_details[] = { }, }, - /*at91sam4sa16c*/ - { - .chipid_cidr = 0x28a70ce0, - .name = "at91sam4sa16c", - .total_flash_size = 1024 * 1024, - .total_sram_size = 160 * 1024, - .n_gpnvms = 3, - .n_banks = 2, - -/* .bank[0] = { */ - { - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 0, - .base_address = FLASH_BANK0_BASE_SD, - .controller_address = 0x400e0a00, - .flash_wait_states = 5, - .present = 1, - .size_bytes = 512 * 1024, - .nsectors = 64, - .sector_size = 8192, - .page_size = 512, - }, - -/* .bank[1] = { */ - { - .probed = 0, - .pChip = NULL, - .pBank = NULL, - .bank_number = 1, - .base_address = FLASH_BANK1_BASE_1024K_SD, - .controller_address = 0x400e0c00, - .flash_wait_states = 5, - .present = 1, - .size_bytes = 512 * 1024, - .nsectors = 64, - .sector_size = 8192, - .page_size = 512, - }, - }, - }, - /* atsamg53n19 */ { .chipid_cidr = 0x247e0ae0, @@ -2554,6 +2544,8 @@ static int sam4_GetDetails(struct sam4_bank_private *pPrivate) pPrivate->pChip->cfg.CHIPID_CIDR); sam4_explain_chipid_cidr(pPrivate->pChip); return ERROR_FAIL; + } else { + LOG_INFO("SAM4 Found chip %s, CIDR 0x%08x", pDetails->name, pDetails->chipid_cidr); } /* DANGER: THERE ARE DRAGONS HERE */ @@ -2624,6 +2616,7 @@ static int _sam4_probe(struct flash_bank *bank, int noise) for (x = 0; x < SAM4_MAX_FLASH_BANKS; x++) { if (bank->base == pPrivate->pChip->details.bank[x].base_address) { bank->size = pPrivate->pChip->details.bank[x].size_bytes; + LOG_INFO("SAM4 Set flash bank to %08X - %08X, idx %d", bank->base, bank->base + bank->size, x); break; } } diff --git a/src/flash/nor/at91samd.c b/src/flash/nor/at91samd.c index 8553ee8..017d144 100644 --- a/src/flash/nor/at91samd.c +++ b/src/flash/nor/at91samd.c @@ -115,15 +115,16 @@ static const struct samd_part samd10_parts[] = { /* Known SAMD11 parts */ static const struct samd_part samd11_parts[] = { - { 0x0, "SAMD11D14AMU", 16, 4 }, + { 0x0, "SAMD11D14AM", 16, 4 }, { 0x1, "SAMD11D13AMU", 8, 4 }, { 0x2, "SAMD11D12AMU", 4, 4 }, - { 0x3, "SAMD11D14ASU", 16, 4 }, + { 0x3, "SAMD11D14ASS", 16, 4 }, { 0x4, "SAMD11D13ASU", 8, 4 }, { 0x5, "SAMD11D12ASU", 4, 4 }, { 0x6, "SAMD11C14A", 16, 4 }, { 0x7, "SAMD11C13A", 8, 4 }, { 0x8, "SAMD11C12A", 4, 4 }, + { 0x9, "SAMD11D14AU", 16, 4 }, }; /* Known SAMD20 parts. See Table 12-8 in 42129F–SAM–10/2013 */ diff --git a/src/flash/nor/cc26xx.c b/src/flash/nor/cc26xx.c new file mode 100644 index 0000000..e6e9e59 --- /dev/null +++ b/src/flash/nor/cc26xx.c @@ -0,0 +1,567 @@ +/*************************************************************************** + * Copyright (C) 2017 by Texas Instruments, Inc. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "imp.h" +#include "cc26xx.h" +#include <helper/binarybuffer.h> +#include <helper/time_support.h> +#include <target/algorithm.h> +#include <target/armv7m.h> +#include <target/image.h> + +#define FLASH_TIMEOUT 8000 + +struct cc26xx_bank { + const char *family_name; + uint32_t icepick_id; + uint32_t user_id; + uint32_t device_type; + uint32_t sector_length; + bool probed; + struct working_area *working_area; + struct armv7m_algorithm armv7m_info; + const uint8_t *algo_code; + uint32_t algo_size; + uint32_t algo_working_size; + uint32_t buffer_addr[2]; + uint32_t params_addr[2]; +}; + +static int cc26xx_auto_probe(struct flash_bank *bank); + +static uint32_t cc26xx_device_type(uint32_t icepick_id, uint32_t user_id) +{ + uint32_t device_type = 0; + + switch (icepick_id & ICEPICK_ID_MASK) { + case CC26X0_ICEPICK_ID: + device_type = CC26X0_TYPE; + break; + case CC26X1_ICEPICK_ID: + device_type = CC26X1_TYPE; + break; + case CC13X0_ICEPICK_ID: + device_type = CC13X0_TYPE; + break; + case CC13X2_CC26X2_ICEPICK_ID: + default: + if ((user_id & USER_ID_CC13_MASK) != 0) + device_type = CC13X2_TYPE; + else + device_type = CC26X2_TYPE; + break; + } + + return device_type; +} + +static uint32_t cc26xx_sector_length(uint32_t icepick_id) +{ + uint32_t sector_length; + + switch (icepick_id & ICEPICK_ID_MASK) { + case CC26X0_ICEPICK_ID: + case CC26X1_ICEPICK_ID: + case CC13X0_ICEPICK_ID: + /* Chameleon family device */ + sector_length = CC26X0_SECTOR_LENGTH; + break; + case CC13X2_CC26X2_ICEPICK_ID: + default: + /* Agama family device */ + sector_length = CC26X2_SECTOR_LENGTH; + break; + } + + return sector_length; +} + +static int cc26xx_wait_algo_done(struct flash_bank *bank, uint32_t params_addr) +{ + struct target *target = bank->target; + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + + uint32_t status_addr = params_addr + CC26XX_STATUS_OFFSET; + uint32_t status = CC26XX_BUFFER_FULL; + long long start_ms; + long long elapsed_ms; + + int retval = ERROR_OK; + + start_ms = timeval_ms(); + while (CC26XX_BUFFER_FULL == status) { + retval = target_read_u32(target, status_addr, &status); + if (ERROR_OK != retval) + return retval; + + elapsed_ms = timeval_ms() - start_ms; + if (elapsed_ms > 500) + keep_alive(); + if (elapsed_ms > FLASH_TIMEOUT) + break; + }; + + if (CC26XX_BUFFER_EMPTY != status) { + LOG_ERROR("%s: Flash operation failed", cc26xx_bank->family_name); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static int cc26xx_init(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + + int retval; + + /* Make sure we've probed the flash to get the device and size */ + retval = cc26xx_auto_probe(bank); + if (ERROR_OK != retval) + return retval; + + /* Check for working area to use for flash helper algorithm */ + if (NULL != cc26xx_bank->working_area) + target_free_working_area(target, cc26xx_bank->working_area); + retval = target_alloc_working_area(target, cc26xx_bank->algo_working_size, + &cc26xx_bank->working_area); + if (ERROR_OK != retval) + return retval; + + /* Confirm the defined working address is the area we need to use */ + if (CC26XX_ALGO_BASE_ADDRESS != cc26xx_bank->working_area->address) + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + + /* Write flash helper algorithm into target memory */ + retval = target_write_buffer(target, CC26XX_ALGO_BASE_ADDRESS, + cc26xx_bank->algo_size, cc26xx_bank->algo_code); + if (ERROR_OK != retval) { + LOG_ERROR("%s: Failed to load flash helper algorithm", + cc26xx_bank->family_name); + target_free_working_area(target, cc26xx_bank->working_area); + return retval; + } + + /* Initialize the ARMv7 specific info to run the algorithm */ + cc26xx_bank->armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; + cc26xx_bank->armv7m_info.core_mode = ARM_MODE_THREAD; + + /* Begin executing the flash helper algorithm */ + retval = target_start_algorithm(target, 0, NULL, 0, NULL, + CC26XX_ALGO_BASE_ADDRESS, 0, &cc26xx_bank->armv7m_info); + if (ERROR_OK != retval) { + LOG_ERROR("%s: Failed to start flash helper algorithm", + cc26xx_bank->family_name); + target_free_working_area(target, cc26xx_bank->working_area); + return retval; + } + + /* + * At this point, the algorithm is running on the target and + * ready to receive commands and data to flash the target + */ + + return retval; +} + +static int cc26xx_quit(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + + int retval; + + /* Regardless of the algo's status, attempt to halt the target */ + (void)target_halt(target); + + /* Now confirm target halted and clean up from flash helper algorithm */ + retval = target_wait_algorithm(target, 0, NULL, 0, NULL, 0, FLASH_TIMEOUT, + &cc26xx_bank->armv7m_info); + + target_free_working_area(target, cc26xx_bank->working_area); + cc26xx_bank->working_area = NULL; + + return retval; +} + +static int cc26xx_mass_erase(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + struct cc26xx_algo_params algo_params; + + int retval; + + if (TARGET_HALTED != target->state) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + retval = cc26xx_init(bank); + if (ERROR_OK != retval) + return retval; + + /* Initialize algorithm parameters */ + buf_set_u32(algo_params.address, 0, 32, 0); + buf_set_u32(algo_params.length, 0, 32, 4); + buf_set_u32(algo_params.command, 0, 32, CC26XX_CMD_ERASE_ALL); + buf_set_u32(algo_params.status, 0, 32, CC26XX_BUFFER_FULL); + + /* Issue flash helper algorithm parameters for mass erase */ + retval = target_write_buffer(target, cc26xx_bank->params_addr[0], + sizeof(algo_params), (uint8_t *)&algo_params); + + /* Wait for command to complete */ + if (ERROR_OK == retval) + retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[0]); + + /* Regardless of errors, try to close down algo */ + (void)cc26xx_quit(bank); + + return retval; +} + +FLASH_BANK_COMMAND_HANDLER(cc26xx_flash_bank_command) +{ + struct cc26xx_bank *cc26xx_bank; + + if (CMD_ARGC < 6) + return ERROR_COMMAND_SYNTAX_ERROR; + + cc26xx_bank = malloc(sizeof(struct cc26xx_bank)); + if (NULL == cc26xx_bank) + return ERROR_FAIL; + + /* Initialize private flash information */ + memset((void *)cc26xx_bank, 0x00, sizeof(struct cc26xx_bank)); + cc26xx_bank->family_name = "cc26xx"; + cc26xx_bank->device_type = CC26XX_NO_TYPE; + cc26xx_bank->sector_length = 0x1000; + + /* Finish initialization of bank */ + bank->driver_priv = cc26xx_bank; + bank->next = NULL; + + return ERROR_OK; +} + +static int cc26xx_erase(struct flash_bank *bank, int first, int last) +{ + struct target *target = bank->target; + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + struct cc26xx_algo_params algo_params; + + uint32_t address; + uint32_t length; + int retval; + + if (TARGET_HALTED != target->state) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + /* Do a mass erase if user requested all sectors of flash */ + if ((first == 0) && (last == (bank->num_sectors - 1))) { + /* Request mass erase of flash */ + return cc26xx_mass_erase(bank); + } + + address = first * cc26xx_bank->sector_length; + length = (last - first + 1) * cc26xx_bank->sector_length; + + retval = cc26xx_init(bank); + if (ERROR_OK != retval) + return retval; + + /* Set up algorithm parameters for erase command */ + buf_set_u32(algo_params.address, 0, 32, address); + buf_set_u32(algo_params.length, 0, 32, length); + buf_set_u32(algo_params.command, 0, 32, CC26XX_CMD_ERASE_SECTORS); + buf_set_u32(algo_params.status, 0, 32, CC26XX_BUFFER_FULL); + + /* Issue flash helper algorithm parameters for erase */ + retval = target_write_buffer(target, cc26xx_bank->params_addr[0], + sizeof(algo_params), (uint8_t *)&algo_params); + + /* If no error, wait for erase to finish */ + if (ERROR_OK == retval) + retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[0]); + + /* Regardless of errors, try to close down algo */ + (void)cc26xx_quit(bank); + + return retval; +} + +static int cc26xx_protect(struct flash_bank *bank, int set, int first, + int last) +{ + return ERROR_OK; +} + +static int cc26xx_write(struct flash_bank *bank, const uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + struct target *target = bank->target; + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + struct cc26xx_algo_params algo_params[2]; + uint32_t size = 0; + long long start_ms; + long long elapsed_ms; + uint32_t address; + + uint32_t index; + int retval; + + if (TARGET_HALTED != target->state) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + retval = cc26xx_init(bank); + if (ERROR_OK != retval) + return retval; + + /* Initialize algorithm parameters to default values */ + buf_set_u32(algo_params[0].command, 0, 32, CC26XX_CMD_PROGRAM); + buf_set_u32(algo_params[1].command, 0, 32, CC26XX_CMD_PROGRAM); + + /* Write requested data, ping-ponging between two buffers */ + index = 0; + start_ms = timeval_ms(); + address = bank->base + offset; + while (count > 0) { + + if (count > cc26xx_bank->sector_length) + size = cc26xx_bank->sector_length; + else + size = count; + + /* Put next block of data to flash into buffer */ + retval = target_write_buffer(target, cc26xx_bank->buffer_addr[index], + size, buffer); + if (ERROR_OK != retval) { + LOG_ERROR("Unable to write data to target memory"); + break; + } + + /* Update algo parameters for next block */ + buf_set_u32(algo_params[index].address, 0, 32, address); + buf_set_u32(algo_params[index].length, 0, 32, size); + buf_set_u32(algo_params[index].status, 0, 32, CC26XX_BUFFER_FULL); + + /* Issue flash helper algorithm parameters for block write */ + retval = target_write_buffer(target, cc26xx_bank->params_addr[index], + sizeof(algo_params[index]), (uint8_t *)&algo_params[index]); + if (ERROR_OK != retval) + break; + + /* Wait for next ping pong buffer to be ready */ + index ^= 1; + retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[index]); + if (ERROR_OK != retval) + break; + + count -= size; + buffer += size; + address += size; + + elapsed_ms = timeval_ms() - start_ms; + if (elapsed_ms > 500) + keep_alive(); + } + + /* If no error yet, wait for last buffer to finish */ + if (ERROR_OK == retval) { + index ^= 1; + retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[index]); + } + + /* Regardless of errors, try to close down algo */ + (void)cc26xx_quit(bank); + + return retval; +} + +static int cc26xx_probe(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + + uint32_t sector_length; + uint32_t value; + int num_sectors; + int max_sectors; + + int retval; + + retval = target_read_u32(target, FCFG1_ICEPICK_ID, &value); + if (ERROR_OK != retval) + return retval; + cc26xx_bank->icepick_id = value; + + retval = target_read_u32(target, FCFG1_USER_ID, &value); + if (ERROR_OK != retval) + return retval; + cc26xx_bank->user_id = value; + + cc26xx_bank->device_type = cc26xx_device_type(cc26xx_bank->icepick_id, + cc26xx_bank->user_id); + + sector_length = cc26xx_sector_length(cc26xx_bank->icepick_id); + + /* Set up appropriate flash helper algorithm */ + switch (cc26xx_bank->icepick_id & ICEPICK_ID_MASK) { + case CC26X0_ICEPICK_ID: + case CC26X1_ICEPICK_ID: + case CC13X0_ICEPICK_ID: + /* Chameleon family device */ + cc26xx_bank->algo_code = cc26x0_algo; + cc26xx_bank->algo_size = sizeof(cc26x0_algo); + cc26xx_bank->algo_working_size = CC26X0_WORKING_SIZE; + cc26xx_bank->buffer_addr[0] = CC26X0_ALGO_BUFFER_0; + cc26xx_bank->buffer_addr[1] = CC26X0_ALGO_BUFFER_1; + cc26xx_bank->params_addr[0] = CC26X0_ALGO_PARAMS_0; + cc26xx_bank->params_addr[1] = CC26X0_ALGO_PARAMS_1; + max_sectors = CC26X0_MAX_SECTORS; + break; + case CC13X2_CC26X2_ICEPICK_ID: + default: + /* Agama family device */ + cc26xx_bank->algo_code = cc26x2_algo; + cc26xx_bank->algo_size = sizeof(cc26x2_algo); + cc26xx_bank->algo_working_size = CC26X2_WORKING_SIZE; + cc26xx_bank->buffer_addr[0] = CC26X2_ALGO_BUFFER_0; + cc26xx_bank->buffer_addr[1] = CC26X2_ALGO_BUFFER_1; + cc26xx_bank->params_addr[0] = CC26X2_ALGO_PARAMS_0; + cc26xx_bank->params_addr[1] = CC26X2_ALGO_PARAMS_1; + max_sectors = CC26X2_MAX_SECTORS; + break; + } + + retval = target_read_u32(target, CC26XX_FLASH_SIZE_INFO, &value); + if (ERROR_OK != retval) + return retval; + num_sectors = value & 0xff; + if (num_sectors > max_sectors) + num_sectors = max_sectors; + + bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors); + if (NULL == bank->sectors) + return ERROR_FAIL; + + bank->base = CC26XX_FLASH_BASE_ADDR; + bank->num_sectors = num_sectors; + bank->size = num_sectors * sector_length; + bank->write_start_alignment = 0; + bank->write_end_alignment = 0; + cc26xx_bank->sector_length = sector_length; + + for (int i = 0; i < num_sectors; i++) { + bank->sectors[i].offset = i * sector_length; + bank->sectors[i].size = sector_length; + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = 0; + } + + /* We've successfully determined the stats on the flash bank */ + cc26xx_bank->probed = true; + + /* If we fall through to here, then all went well */ + + return ERROR_OK; +} + +static int cc26xx_auto_probe(struct flash_bank *bank) +{ + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + + int retval = ERROR_OK; + + if (bank->bank_number != 0) { + /* Invalid bank number somehow */ + return ERROR_FAIL; + } + + if (!cc26xx_bank->probed) + retval = cc26xx_probe(bank); + + return retval; +} + +static int cc26xx_protect_check(struct flash_bank *bank) +{ + return ERROR_OK; +} + +static int cc26xx_info(struct flash_bank *bank, char *buf, int buf_size) +{ + struct cc26xx_bank *cc26xx_bank = bank->driver_priv; + int printed = 0; + const char *device; + + switch (cc26xx_bank->device_type) { + case CC26X0_TYPE: + device = "CC26x0"; + break; + case CC26X1_TYPE: + device = "CC26x1"; + break; + case CC13X0_TYPE: + device = "CC13x0"; + break; + case CC13X2_TYPE: + device = "CC13x2"; + break; + case CC26X2_TYPE: + device = "CC26x2"; + break; + case CC26XX_NO_TYPE: + default: + device = "Unrecognized"; + break; + } + + printed = snprintf(buf, buf_size, + "%s device: ICEPick ID 0x%08x, USER ID 0x%08x\n", + device, cc26xx_bank->icepick_id, cc26xx_bank->user_id); + + if (printed >= buf_size) + return ERROR_BUF_TOO_SMALL; + + return ERROR_OK; +} + +struct flash_driver cc26xx_flash = { + .name = "cc26xx", + .flash_bank_command = cc26xx_flash_bank_command, + .erase = cc26xx_erase, + .protect = cc26xx_protect, + .write = cc26xx_write, + .read = default_flash_read, + .probe = cc26xx_probe, + .auto_probe = cc26xx_auto_probe, + .erase_check = default_flash_blank_check, + .protect_check = cc26xx_protect_check, + .info = cc26xx_info, + .free_driver_priv = default_flash_free_driver_priv, +}; diff --git a/src/flash/nor/cc26xx.h b/src/flash/nor/cc26xx.h new file mode 100644 index 0000000..51a09f1 --- /dev/null +++ b/src/flash/nor/cc26xx.h @@ -0,0 +1,101 @@ +/*************************************************************************** + * Copyright (C) 2017 by Texas Instruments, Inc. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#ifndef OPENOCD_FLASH_NOR_CC26XX_H +#define OPENOCD_FLASH_NOR_CC26XX_H + +/* Addresses of FCFG1 registers to access ICEPick Device ID and User ID */ +#define FCFG1_ICEPICK_ID 0x50001318 +#define FCFG1_USER_ID 0x50001294 + +/* ICEPick device ID mask and values */ +#define ICEPICK_ID_MASK 0x0fffffff +#define ICEPICK_REV_MASK 0xf0000000 +#define CC26X0_ICEPICK_ID 0x0b99a02f +#define CC26X1_ICEPICK_ID 0x0b9bd02f +#define CC13X0_ICEPICK_ID 0x0b9be02f +#define CC13X2_CC26X2_ICEPICK_ID 0x0bb4102f + +/* User ID mask for Agama CC13x2 vs CC26x2 */ +#define USER_ID_CC13_MASK 0x00800000 + +/* Common CC26xx/CC13xx flash and memory parameters */ +#define CC26XX_FLASH_BASE_ADDR 0x00000000 +#define CC26XX_FLASH_SIZE_INFO 0x4003002c +#define CC26XX_SRAM_SIZE_INFO 0x40082250 +#define CC26XX_ALGO_BASE_ADDRESS 0x20000000 + +/* Chameleon CC26x0/CC13x0 specific parameters */ +#define CC26X0_MAX_SECTORS 32 +#define CC26X0_SECTOR_LENGTH 0x1000 +#define CC26X0_ALGO_BUFFER_0 0x20001c00 +#define CC26X0_ALGO_BUFFER_1 0x20002c00 +#define CC26X0_ALGO_PARAMS_0 0x20001bd8 +#define CC26X0_ALGO_PARAMS_1 0x20001bec +#define CC26X0_WORKING_SIZE (CC26X0_ALGO_BUFFER_1 + CC26X0_SECTOR_LENGTH - \ + CC26XX_ALGO_BASE_ADDRESS) + +/* Agama CC26x2/CC13x2 specific parameters */ +#define CC26X2_MAX_SECTORS 128 +#define CC26X2_SECTOR_LENGTH 0x2000 +#define CC26X2_ALGO_BUFFER_0 0x20002000 +#define CC26X2_ALGO_BUFFER_1 0x20004000 +#define CC26X2_ALGO_PARAMS_0 0x20001fd8 +#define CC26X2_ALGO_PARAMS_1 0x20001fec +#define CC26X2_WORKING_SIZE (CC26X2_ALGO_BUFFER_1 + CC26X2_SECTOR_LENGTH - \ + CC26XX_ALGO_BASE_ADDRESS) + +/* CC26xx flash helper algorithm buffer flags */ +#define CC26XX_BUFFER_EMPTY 0x00000000 +#define CC26XX_BUFFER_FULL 0xffffffff + +/* CC26XX flash helper algorithm commands */ +#define CC26XX_CMD_NO_ACTION 0 +#define CC26XX_CMD_ERASE_ALL 1 +#define CC26XX_CMD_PROGRAM 2 +#define CC26XX_CMD_ERASE_AND_PROGRAM 3 +#define CC26XX_CMD_ERASE_AND_PROGRAM_WITH_RETAIN 4 +#define CC26XX_CMD_ERASE_SECTORS 5 + +/* CC26xx and CC13xx device types */ +#define CC26XX_NO_TYPE 0 /* Device type not determined yet */ +#define CC26X0_TYPE 1 /* CC26x0 Chameleon device */ +#define CC26X1_TYPE 2 /* CC26x1 Chameleon device */ +#define CC26X2_TYPE 3 /* CC26x2 Agama device */ +#define CC13X0_TYPE 4 /* CC13x0 Chameleon device */ +#define CC13X2_TYPE 5 /* CC13x2 Agama device */ + +/* Flash helper algorithm parameter block struct */ +#define CC26XX_STATUS_OFFSET 0x0c +struct cc26xx_algo_params { + uint8_t address[4]; + uint8_t length[4]; + uint8_t command[4]; + uint8_t status[4]; +}; + +/* Flash helper algorithm for CC26x0 Chameleon targets */ +const uint8_t cc26x0_algo[] = { +#include "../../../contrib/loaders/flash/cc26xx/cc26x0_algo.inc" +}; + +/* Flash helper algorithm for CC26x2 Agama targets */ +const uint8_t cc26x2_algo[] = { +#include "../../../contrib/loaders/flash/cc26xx/cc26x2_algo.inc" +}; + +#endif /* OPENOCD_FLASH_NOR_CC26XX_H */ diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index a094c20..2b3146d 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -33,6 +33,7 @@ extern struct flash_driver atsamv_flash; extern struct flash_driver avr_flash; extern struct flash_driver bluenrgx_flash; extern struct flash_driver cc3220sf_flash; +extern struct flash_driver cc26xx_flash; extern struct flash_driver cfi_flash; extern struct flash_driver dsp5680xx_flash; extern struct flash_driver efm32_flash; @@ -50,6 +51,7 @@ extern struct flash_driver lpc2900_flash; extern struct flash_driver lpcspifi_flash; extern struct flash_driver mdr_flash; extern struct flash_driver mrvlqspi_flash; +extern struct flash_driver msp432_flash; extern struct flash_driver niietcm4_flash; extern struct flash_driver nrf5_flash; extern struct flash_driver nrf51_flash; @@ -96,6 +98,7 @@ static struct flash_driver *flash_drivers[] = { &avr_flash, &bluenrgx_flash, &cc3220sf_flash, + &cc26xx_flash, &cfi_flash, &dsp5680xx_flash, &efm32_flash, @@ -113,6 +116,7 @@ static struct flash_driver *flash_drivers[] = { &lpcspifi_flash, &mdr_flash, &mrvlqspi_flash, + &msp432_flash, &niietcm4_flash, &nrf5_flash, &nrf51_flash, diff --git a/src/flash/nor/msp432.c b/src/flash/nor/msp432.c new file mode 100644 index 0000000..5caa052 --- /dev/null +++ b/src/flash/nor/msp432.c @@ -0,0 +1,1103 @@ +/*************************************************************************** + * Copyright (C) 2018 by Texas Instruments, Inc. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "imp.h" +#include "msp432.h" +#include <helper/binarybuffer.h> +#include <helper/time_support.h> +#include <target/algorithm.h> +#include <target/armv7m.h> +#include <target/image.h> + +/* MSP432P4 hardware registers */ +#define P4_FLASH_MAIN_SIZE_REG 0xE0043020 +#define P4_FLASH_INFO_SIZE_REG 0xE0043024 +#define P4_DEVICE_ID_REG 0x0020100C +#define P4_HARDWARE_REV_REG 0x00201010 + +/* MSP432E4 hardware registers */ +#define E4_DID0_REG 0x400FE000 +#define E4_DID1_REG 0x400FE004 + +#define FLASH_TIMEOUT 8000 + +#define SUPPORT_MESSAGE \ + "Your pre-production MSP432P401x silicon is not fully supported\n" \ + "You can find more information at www.ti.com/product/MSP432P401R" + +struct msp432_bank { + uint32_t device_id; + uint32_t hardware_rev; + int family_type; + int device_type; + uint32_t sector_length; + bool probed[2]; + bool unlock_bsl; + struct working_area *working_area; + struct armv7m_algorithm armv7m_info; +}; + +static int msp432_auto_probe(struct flash_bank *bank); + +static int msp432_device_type(uint32_t family_type, uint32_t device_id, + uint32_t hardware_rev) +{ + int device_type = MSP432_NO_TYPE; + + if (MSP432E4 == family_type) { + /* MSP432E4 device family */ + + if (device_id == 0x180C0002) { + if (hardware_rev == 0x102DC06E) { + /* The 01Y variant */ + device_type = MSP432E401Y; + } else if (hardware_rev == 0x1032E076) { + /* The 11Y variant */ + device_type = MSP432E411Y; + } else { + /* Reasonable guess that this is a new variant */ + device_type = MSP432E4X_GUESS; + } + } else { + /* Wild guess that this is an MSP432E4 */ + device_type = MSP432E4X_GUESS; + } + } else { + /* MSP432P4 device family */ + + /* Examine the device ID and hardware revision to get the device type */ + switch (device_id) { + case 0xA000: + case 0xA001: + case 0xA002: + case 0xA003: + case 0xA004: + case 0xA005: + /* Device is definitely MSP432P401x, check hardware revision */ + if (hardware_rev == 0x41 || hardware_rev == 0x42) { + /* Rev A or B of the silicon has been deprecated */ + device_type = MSP432P401X_DEPR; + } else if (hardware_rev >= 0x43 && hardware_rev <= 0x49) { + /* Current and future revisions of the MSP432P401x device */ + device_type = MSP432P401X; + } else { + /* Unknown or unanticipated hardware revision */ + device_type = MSP432P401X_GUESS; + } + break; + case 0xA010: + case 0xA012: + case 0xA016: + case 0xA019: + case 0xA01F: + case 0xA020: + case 0xA022: + case 0xA026: + case 0xA029: + case 0xA02F: + /* Device is definitely MSP432P411x, check hardware revision */ + if (hardware_rev >= 0x41 && hardware_rev <= 0x49) { + /* Current and future revisions of the MSP432P411x device */ + device_type = MSP432P411X; + } else { + /* Unknown or unanticipated hardware revision */ + device_type = MSP432P411X_GUESS; + } + break; + case 0xFFFF: + /* Device is very early silicon that has been deprecated */ + device_type = MSP432P401X_DEPR; + break; + default: + if (device_id < 0xA010) { + /* Wild guess that this is an MSP432P401x */ + device_type = MSP432P401X_GUESS; + } else { + /* Reasonable guess that this is a new variant */ + device_type = MSP432P411X_GUESS; + } + break; + } + } + + return device_type; +} + +static const char *msp432_return_text(uint32_t return_code) +{ + switch (return_code) { + case FLASH_BUSY: + return "FLASH_BUSY"; + case FLASH_SUCCESS: + return "FLASH_SUCCESS"; + case FLASH_ERROR: + return "FLASH_ERROR"; + case FLASH_TIMEOUT_ERROR: + return "FLASH_TIMEOUT_ERROR"; + case FLASH_VERIFY_ERROR: + return "FLASH_VERIFY_WRONG"; + case FLASH_WRONG_COMMAND: + return "FLASH_WRONG_COMMAND"; + case FLASH_POWER_ERROR: + return "FLASH_POWER_ERROR"; + default: + return "UNDEFINED_RETURN_CODE"; + } +} + +static void msp432_init_params(struct msp432_algo_params *algo_params) +{ + buf_set_u32(algo_params->flash_command, 0, 32, FLASH_NO_COMMAND); + buf_set_u32(algo_params->return_code, 0, 32, 0); + buf_set_u32(algo_params->_reserved0, 0, 32, 0); + buf_set_u32(algo_params->address, 0, 32, 0); + buf_set_u32(algo_params->length, 0, 32, 0); + buf_set_u32(algo_params->buffer1_status, 0, 32, BUFFER_INACTIVE); + buf_set_u32(algo_params->buffer2_status, 0, 32, BUFFER_INACTIVE); + buf_set_u32(algo_params->erase_param, 0, 32, FLASH_ERASE_MAIN); + buf_set_u32(algo_params->unlock_bsl, 0, 32, FLASH_LOCK_BSL); +} + +static int msp432_exec_cmd(struct target *target, struct msp432_algo_params + *algo_params, uint32_t command) +{ + int retval; + + /* Make sure the given params do not include the command */ + buf_set_u32(algo_params->flash_command, 0, 32, FLASH_NO_COMMAND); + buf_set_u32(algo_params->return_code, 0, 32, 0); + buf_set_u32(algo_params->buffer1_status, 0, 32, BUFFER_INACTIVE); + buf_set_u32(algo_params->buffer2_status, 0, 32, BUFFER_INACTIVE); + + /* Write out parameters to target memory */ + retval = target_write_buffer(target, ALGO_PARAMS_BASE_ADDR, + sizeof(struct msp432_algo_params), (uint8_t *)algo_params); + if (ERROR_OK != retval) + return retval; + + /* Write out command to target memory */ + retval = target_write_buffer(target, ALGO_FLASH_COMMAND_ADDR, + sizeof(command), (uint8_t *)&command); + + return retval; +} + +static int msp432_wait_return_code(struct target *target) +{ + uint32_t return_code = 0; + long long start_ms; + long long elapsed_ms; + + int retval = ERROR_OK; + + start_ms = timeval_ms(); + while ((0 == return_code) || (FLASH_BUSY == return_code)) { + retval = target_read_buffer(target, ALGO_RETURN_CODE_ADDR, + sizeof(return_code), (uint8_t *)&return_code); + if (ERROR_OK != retval) + return retval; + + elapsed_ms = timeval_ms() - start_ms; + if (elapsed_ms > 500) + keep_alive(); + if (elapsed_ms > FLASH_TIMEOUT) + break; + }; + + if (FLASH_SUCCESS != return_code) { + LOG_ERROR("msp432: Flash operation failed: %s", + msp432_return_text(return_code)); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static int msp432_wait_inactive(struct target *target, uint32_t buffer) +{ + uint32_t status_code = BUFFER_ACTIVE; + uint32_t status_addr; + long long start_ms; + long long elapsed_ms; + + int retval; + + switch (buffer) { + case 1: /* Buffer 1 */ + status_addr = ALGO_BUFFER1_STATUS_ADDR; + break; + case 2: /* Buffer 2 */ + status_addr = ALGO_BUFFER2_STATUS_ADDR; + break; + default: + return ERROR_FAIL; + } + + start_ms = timeval_ms(); + while (BUFFER_INACTIVE != status_code) { + retval = target_read_buffer(target, status_addr, sizeof(status_code), + (uint8_t *)&status_code); + if (ERROR_OK != retval) + return retval; + + elapsed_ms = timeval_ms() - start_ms; + if (elapsed_ms > 500) + keep_alive(); + if (elapsed_ms > FLASH_TIMEOUT) + break; + }; + + if (BUFFER_INACTIVE != status_code) { + LOG_ERROR( + "msp432: Flash operation failed: buffer not written to flash"); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static int msp432_init(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct msp432_bank *msp432_bank = bank->driver_priv; + struct msp432_algo_params algo_params; + struct reg_param reg_params[1]; + + const uint8_t *loader_code; + uint32_t loader_size; + uint32_t algo_entry_addr; + int retval; + + /* Make sure we've probed the flash to get the device and size */ + retval = msp432_auto_probe(bank); + if (ERROR_OK != retval) + return retval; + + /* Choose appropriate flash helper algorithm */ + switch (msp432_bank->device_type) { + case MSP432P401X: + case MSP432P401X_DEPR: + case MSP432P401X_GUESS: + default: + loader_code = msp432p401x_algo; + loader_size = sizeof(msp432p401x_algo); + algo_entry_addr = P4_ALGO_ENTRY_ADDR; + break; + case MSP432P411X: + case MSP432P411X_GUESS: + loader_code = msp432p411x_algo; + loader_size = sizeof(msp432p411x_algo); + algo_entry_addr = P4_ALGO_ENTRY_ADDR; + break; + case MSP432E401Y: + case MSP432E411Y: + case MSP432E4X_GUESS: + loader_code = msp432e4x_algo; + loader_size = sizeof(msp432e4x_algo); + algo_entry_addr = E4_ALGO_ENTRY_ADDR; + break; + } + + /* Issue warnings if this is a device we may not be able to flash */ + if (MSP432P401X_GUESS == msp432_bank->device_type || + MSP432P411X_GUESS == msp432_bank->device_type) { + /* Explicit device type check failed. Report this. */ + LOG_WARNING( + "msp432: Unrecognized MSP432P4 Device ID and Hardware " + "Rev (%04X, %02X)", msp432_bank->device_id, + msp432_bank->hardware_rev); + } else if (MSP432P401X_DEPR == msp432_bank->device_type) { + LOG_WARNING( + "msp432: MSP432P401x pre-production device (deprecated " + "silicon)\n" SUPPORT_MESSAGE); + } else if (MSP432E4X_GUESS == msp432_bank->device_type) { + /* Explicit device type check failed. Report this. */ + LOG_WARNING( + "msp432: Unrecognized MSP432E4 DID0 and DID1 values " + "(%08X, %08X)", msp432_bank->device_id, + msp432_bank->hardware_rev); + } + + /* Check for working area to use for flash helper algorithm */ + if (NULL != msp432_bank->working_area) + target_free_working_area(target, msp432_bank->working_area); + retval = target_alloc_working_area(target, ALGO_WORKING_SIZE, + &msp432_bank->working_area); + if (ERROR_OK != retval) + return retval; + + /* Confirm the defined working address is the area we need to use */ + if (ALGO_BASE_ADDR != msp432_bank->working_area->address) + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + + /* Write flash helper algorithm into target memory */ + retval = target_write_buffer(target, ALGO_BASE_ADDR, loader_size, + loader_code); + if (ERROR_OK != retval) + return retval; + + /* Initialize the ARMv7 specific info to run the algorithm */ + msp432_bank->armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; + msp432_bank->armv7m_info.core_mode = ARM_MODE_THREAD; + + /* Initialize algorithm parameters to default values */ + msp432_init_params(&algo_params); + + /* Write out parameters to target memory */ + retval = target_write_buffer(target, ALGO_PARAMS_BASE_ADDR, + sizeof(algo_params), (uint8_t *)&algo_params); + if (ERROR_OK != retval) + return retval; + + /* Initialize stack pointer for flash helper algorithm */ + init_reg_param(®_params[0], "sp", 32, PARAM_OUT); + buf_set_u32(reg_params[0].value, 0, 32, ALGO_STACK_POINTER_ADDR); + + /* Begin executing the flash helper algorithm */ + retval = target_start_algorithm(target, 0, 0, 1, reg_params, + algo_entry_addr, 0, &msp432_bank->armv7m_info); + destroy_reg_param(®_params[0]); + if (ERROR_OK != retval) { + LOG_ERROR("msp432: Failed to start flash helper algorithm"); + return retval; + } + + /* + * At this point, the algorithm is running on the target and + * ready to receive commands and data to flash the target + */ + + /* Issue the init command to the flash helper algorithm */ + retval = msp432_exec_cmd(target, &algo_params, FLASH_INIT); + if (ERROR_OK != retval) + return retval; + + retval = msp432_wait_return_code(target); + + return retval; +} + +static int msp432_quit(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct msp432_bank *msp432_bank = bank->driver_priv; + struct msp432_algo_params algo_params; + + int retval; + + /* Initialize algorithm parameters to default values */ + msp432_init_params(&algo_params); + + /* Issue the exit command to the flash helper algorithm */ + retval = msp432_exec_cmd(target, &algo_params, FLASH_EXIT); + if (ERROR_OK != retval) + return retval; + + (void)msp432_wait_return_code(target); + + /* Regardless of the return code, attempt to halt the target */ + (void)target_halt(target); + + /* Now confirm target halted and clean up from flash helper algorithm */ + retval = target_wait_algorithm(target, 0, NULL, 0, NULL, 0, FLASH_TIMEOUT, + &msp432_bank->armv7m_info); + + target_free_working_area(target, msp432_bank->working_area); + msp432_bank->working_area = NULL; + + return retval; +} + +static int msp432_mass_erase(struct flash_bank *bank, bool all) +{ + struct target *target = bank->target; + struct msp432_bank *msp432_bank = bank->driver_priv; + struct msp432_algo_params algo_params; + + int retval; + + if (TARGET_HALTED != target->state) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + retval = msp432_init(bank); + if (ERROR_OK != retval) + return retval; + + /* Initialize algorithm parameters to default values */ + msp432_init_params(&algo_params); + if (all) { + buf_set_u32(algo_params.erase_param, 0, 32, + FLASH_ERASE_MAIN | FLASH_ERASE_INFO); + if (msp432_bank->unlock_bsl) + buf_set_u32(algo_params.unlock_bsl, 0, 32, FLASH_UNLOCK_BSL); + } + + /* Issue the mass erase command to the flash helper algorithm */ + retval = msp432_exec_cmd(target, &algo_params, FLASH_MASS_ERASE); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return retval; + } + + retval = msp432_wait_return_code(target); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return retval; + } + + retval = msp432_quit(bank); + if (ERROR_OK != retval) + return retval; + + return retval; +} + +COMMAND_HANDLER(msp432_mass_erase_command) +{ + struct flash_bank *bank; + struct msp432_bank *msp432_bank; + bool all; + int retval; + + if (0 == CMD_ARGC) { + all = false; + } else if (1 == CMD_ARGC) { + /* Check argument for how much to erase */ + if (0 == strcmp(CMD_ARGV[0], "main")) + all = false; + else if (0 == strcmp(CMD_ARGV[0], "all")) + all = true; + else + return ERROR_COMMAND_SYNTAX_ERROR; + } else { + return ERROR_COMMAND_SYNTAX_ERROR; + } + + retval = get_flash_bank_by_num(0, &bank); + if (ERROR_OK != retval) + return retval; + + msp432_bank = bank->driver_priv; + + if (MSP432E4 == msp432_bank->family_type) { + /* MSP432E4 does not have main vs info regions, ignore "all" */ + all = false; + } + + retval = msp432_mass_erase(bank, all); + if (ERROR_OK != retval) + return retval; + + if (MSP432E4 == msp432_bank->family_type) { + /* MSP432E4 does not have main vs info regions */ + LOG_INFO("msp432: Mass erase of flash is complete"); + } else { + LOG_INFO("msp432: Mass erase of %s is complete", + all ? "main + info flash" : "main flash"); + } + + return ERROR_OK; +} + +COMMAND_HANDLER(msp432_bsl_command) +{ + struct flash_bank *bank; + struct msp432_bank *msp432_bank; + int retval; + + if (1 < CMD_ARGC) + return ERROR_COMMAND_SYNTAX_ERROR; + + retval = get_flash_bank_by_num(0, &bank); + if (ERROR_OK != retval) + return retval; + + msp432_bank = bank->driver_priv; + + if (MSP432E4 == msp432_bank->family_type) { + LOG_WARNING("msp432: MSP432E4 does not have a BSL region"); + return ERROR_OK; + } + + if (1 == CMD_ARGC) { + if (0 == strcmp(CMD_ARGV[0], "lock")) + msp432_bank->unlock_bsl = false; + else if (0 == strcmp(CMD_ARGV[0], "unlock")) + msp432_bank->unlock_bsl = true; + else + return ERROR_COMMAND_SYNTAX_ERROR; + } + + LOG_INFO("msp432: BSL flash region is currently %slocked", + msp432_bank->unlock_bsl ? "un" : ""); + + return ERROR_OK; +} + +FLASH_BANK_COMMAND_HANDLER(msp432_flash_bank_command) +{ + struct msp432_bank *msp432_bank; + + if (CMD_ARGC < 6) + return ERROR_COMMAND_SYNTAX_ERROR; + + msp432_bank = malloc(sizeof(struct msp432_bank)); + if (NULL == msp432_bank) + return ERROR_FAIL; + + /* Initialize private flash information */ + msp432_bank->device_id = 0; + msp432_bank->hardware_rev = 0; + msp432_bank->family_type = MSP432_NO_FAMILY; + msp432_bank->device_type = MSP432_NO_TYPE; + msp432_bank->sector_length = 0x1000; + msp432_bank->probed[0] = false; + msp432_bank->probed[1] = false; + msp432_bank->unlock_bsl = false; + msp432_bank->working_area = NULL; + + /* Finish initialization of bank 0 (main flash) */ + bank->driver_priv = msp432_bank; + bank->next = NULL; + + return ERROR_OK; +} + +static int msp432_erase(struct flash_bank *bank, int first, int last) +{ + struct target *target = bank->target; + struct msp432_bank *msp432_bank = bank->driver_priv; + struct msp432_algo_params algo_params; + + int retval; + + if (TARGET_HALTED != target->state) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + /* Do a mass erase if user requested all sectors of main flash */ + if ((0 == bank->bank_number) && (first == 0) && + (last == (bank->num_sectors - 1))) { + /* Request mass erase of main flash */ + return msp432_mass_erase(bank, false); + } + + retval = msp432_init(bank); + if (ERROR_OK != retval) + return retval; + + /* Initialize algorithm parameters to default values */ + msp432_init_params(&algo_params); + + /* Adjust params if this is the info bank */ + if (1 == bank->bank_number) { + buf_set_u32(algo_params.erase_param, 0, 32, FLASH_ERASE_INFO); + /* And flag if BSL is unlocked */ + if (msp432_bank->unlock_bsl) + buf_set_u32(algo_params.unlock_bsl, 0, 32, FLASH_UNLOCK_BSL); + } + + /* Erase requested sectors one by one */ + for (int i = first; i <= last; i++) { + + /* Skip TVL (read-only) sector of the info bank */ + if (1 == bank->bank_number && 1 == i) + continue; + + /* Skip BSL sectors of info bank if locked */ + if (1 == bank->bank_number && (2 == i || 3 == i) && + !msp432_bank->unlock_bsl) + continue; + + /* Convert sector number to starting address of sector */ + buf_set_u32(algo_params.address, 0, 32, bank->base + + (i * msp432_bank->sector_length)); + + /* Issue the sector erase command to the flash helper algorithm */ + retval = msp432_exec_cmd(target, &algo_params, FLASH_SECTOR_ERASE); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return retval; + } + + retval = msp432_wait_return_code(target); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return retval; + } + } + + retval = msp432_quit(bank); + if (ERROR_OK != retval) + return retval; + + return retval; +} + +static int msp432_protect(struct flash_bank *bank, int set, int first, + int last) +{ + return ERROR_OK; +} + +static int msp432_write(struct flash_bank *bank, const uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + struct target *target = bank->target; + struct msp432_bank *msp432_bank = bank->driver_priv; + struct msp432_algo_params algo_params; + uint32_t size; + uint32_t data_ready = BUFFER_DATA_READY; + long long start_ms; + long long elapsed_ms; + + int retval; + + if (TARGET_HALTED != target->state) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + /* + * Block attempts to write to read-only sectors of flash + * The TVL region in sector 1 of the info flash is always read-only + * The BSL region in sectors 2 and 3 of the info flash may be unlocked + * The helper algorithm will hang on attempts to write to TVL + */ + if (1 == bank->bank_number) { + /* Set read-only start to TVL sector */ + uint32_t start = 0x1000; + /* Set read-only end after BSL region if locked */ + uint32_t end = (msp432_bank->unlock_bsl) ? 0x2000 : 0x4000; + /* Check if request includes anything in read-only sectors */ + if ((offset + count - 1) < start || offset >= end) { + /* The request includes no bytes in read-only sectors */ + /* Fall out and process the request normally */ + } else { + /* Send a request for anything before read-only sectors */ + if (offset < start) { + uint32_t start_count = MIN(start - offset, count); + retval = msp432_write(bank, buffer, offset, start_count); + if (ERROR_OK != retval) + return retval; + } + /* Send a request for anything after read-only sectors */ + if ((offset + count - 1) >= end) { + uint32_t skip = end - offset; + count -= skip; + offset += skip; + buffer += skip; + return msp432_write(bank, buffer, offset, count); + } else { + /* Request is entirely in read-only sectors */ + return ERROR_OK; + } + } + } + + retval = msp432_init(bank); + if (ERROR_OK != retval) + return retval; + + /* Initialize algorithm parameters to default values */ + msp432_init_params(&algo_params); + + /* Set up parameters for requested flash write operation */ + buf_set_u32(algo_params.address, 0, 32, bank->base + offset); + buf_set_u32(algo_params.length, 0, 32, count); + + /* Check if this is the info bank */ + if (1 == bank->bank_number) { + /* And flag if BSL is unlocked */ + if (msp432_bank->unlock_bsl) + buf_set_u32(algo_params.unlock_bsl, 0, 32, FLASH_UNLOCK_BSL); + } + + /* Set up flash helper algorithm to continuous flash mode */ + retval = msp432_exec_cmd(target, &algo_params, FLASH_CONTINUOUS); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return retval; + } + + /* Write requested data, one buffer at a time */ + start_ms = timeval_ms(); + while (count > 0) { + + if (count > ALGO_BUFFER_SIZE) + size = ALGO_BUFFER_SIZE; + else + size = count; + + /* Put next block of data to flash into buffer */ + retval = target_write_buffer(target, ALGO_BUFFER1_ADDR, size, buffer); + if (ERROR_OK != retval) { + LOG_ERROR("Unable to write data to target memory"); + (void)msp432_quit(bank); + return ERROR_FLASH_OPERATION_FAILED; + } + + /* Signal the flash helper algorithm that data is ready to flash */ + retval = target_write_buffer(target, ALGO_BUFFER1_STATUS_ADDR, + sizeof(data_ready), (uint8_t *)&data_ready); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return ERROR_FLASH_OPERATION_FAILED; + } + + retval = msp432_wait_inactive(target, 1); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return retval; + } + + count -= size; + buffer += size; + + elapsed_ms = timeval_ms() - start_ms; + if (elapsed_ms > 500) + keep_alive(); + } + + /* Confirm that the flash helper algorithm is finished */ + retval = msp432_wait_return_code(target); + if (ERROR_OK != retval) { + (void)msp432_quit(bank); + return retval; + } + + retval = msp432_quit(bank); + if (ERROR_OK != retval) + return retval; + + return retval; +} + +static int msp432_probe(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct msp432_bank *msp432_bank = bank->driver_priv; + + char *name; + + uint32_t device_id; + uint32_t hardware_rev; + + uint32_t base; + uint32_t sector_length; + uint32_t size; + int num_sectors; + int bank_id; + + int retval; + + bank_id = bank->bank_number; + + /* Read the flash size register to determine this is a P4 or not */ + /* MSP432P4s will return the size of flash. MSP432E4s will return zero */ + retval = target_read_u32(target, P4_FLASH_MAIN_SIZE_REG, &size); + if (ERROR_OK != retval) + return retval; + + if (0 == size) { + /* This is likely an MSP432E4 */ + msp432_bank->family_type = MSP432E4; + + retval = target_read_u32(target, E4_DID0_REG, &device_id); + if (ERROR_OK != retval) + return retval; + + msp432_bank->device_id = device_id; + + retval = target_read_u32(target, E4_DID1_REG, &hardware_rev); + if (ERROR_OK != retval) + return retval; + + msp432_bank->hardware_rev = hardware_rev; + } else { + /* This is likely an MSP432P4 */ + msp432_bank->family_type = MSP432P4; + + retval = target_read_u32(target, P4_DEVICE_ID_REG, &device_id); + if (ERROR_OK != retval) + return retval; + + msp432_bank->device_id = device_id & 0xFFFF; + + retval = target_read_u32(target, P4_HARDWARE_REV_REG, &hardware_rev); + if (ERROR_OK != retval) + return retval; + + msp432_bank->hardware_rev = hardware_rev & 0xFF; + } + + msp432_bank->device_type = msp432_device_type(msp432_bank->family_type, + msp432_bank->device_id, msp432_bank->hardware_rev); + + /* If not already allocated, create the info bank for MSP432P4 */ + /* We could not determine it was needed until device was probed */ + if (MSP432P4 == msp432_bank->family_type) { + /* If we've been given bank 1, then this was already done */ + if (0 == bank_id) { + /* And only allocate it if it doesn't exist yet */ + if (NULL == bank->next) { + struct flash_bank *info_bank; + info_bank = malloc(sizeof(struct flash_bank)); + if (NULL == info_bank) + return ERROR_FAIL; + + name = malloc(strlen(bank->name)+1); + if (NULL == name) { + free(info_bank); + return ERROR_FAIL; + } + strcpy(name, bank->name); + + /* Initialize bank 1 (info region) */ + info_bank->name = name; + info_bank->target = bank->target; + info_bank->driver = bank->driver; + info_bank->driver_priv = bank->driver_priv; + info_bank->bank_number = 1; + info_bank->base = 0x00200000; + info_bank->size = 0; + info_bank->chip_width = 0; + info_bank->bus_width = 0; + info_bank->erased_value = 0xff; + info_bank->default_padded_value = 0xff; + info_bank->write_start_alignment = 0; + info_bank->write_end_alignment = 0; + info_bank->minimal_write_gap = FLASH_WRITE_GAP_SECTOR; + info_bank->num_sectors = 0; + info_bank->sectors = NULL; + info_bank->num_prot_blocks = 0; + info_bank->prot_blocks = NULL; + info_bank->next = NULL; + + /* Enable the new bank */ + bank->next = info_bank; + } + } + } + + if (MSP432P4 == msp432_bank->family_type) { + /* Set up MSP432P4 specific flash parameters */ + if (0 == bank_id) { + retval = target_read_u32(target, P4_FLASH_MAIN_SIZE_REG, &size); + if (ERROR_OK != retval) + return retval; + + base = P4_FLASH_MAIN_BASE; + sector_length = P4_SECTOR_LENGTH; + num_sectors = size / sector_length; + } else if (1 == bank_id) { + if (msp432_bank->device_type == MSP432P411X || + msp432_bank->device_type == MSP432P411X_GUESS) { + /* MSP432P411x has an info size register, use that for size */ + retval = target_read_u32(target, P4_FLASH_INFO_SIZE_REG, &size); + if (ERROR_OK != retval) + return retval; + } else { + /* All other MSP432P401x devices have fixed info region size */ + size = 0x4000; /* 16 KB info region */ + } + base = P4_FLASH_INFO_BASE; + sector_length = P4_SECTOR_LENGTH; + num_sectors = size / sector_length; + } else { + /* Invalid bank number somehow */ + return ERROR_FAIL; + } + } else { + /* Set up MSP432E4 specific flash parameters */ + base = E4_FLASH_BASE; + size = E4_FLASH_SIZE; + sector_length = E4_SECTOR_LENGTH; + num_sectors = size / sector_length; + } + + if (NULL != bank->sectors) { + free(bank->sectors); + bank->sectors = NULL; + } + + bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors); + if (NULL == bank->sectors) + return ERROR_FAIL; + + bank->base = base; + bank->size = size; + bank->write_start_alignment = 0; + bank->write_end_alignment = 0; + bank->num_sectors = num_sectors; + msp432_bank->sector_length = sector_length; + + for (int i = 0; i < num_sectors; i++) { + bank->sectors[i].offset = i * sector_length; + bank->sectors[i].size = sector_length; + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = 0; + } + + /* We've successfully determined the stats on this flash bank */ + msp432_bank->probed[bank_id] = true; + + /* If we fall through to here, then all went well */ + + return ERROR_OK; +} + +static int msp432_auto_probe(struct flash_bank *bank) +{ + struct msp432_bank *msp432_bank = bank->driver_priv; + + int retval = ERROR_OK; + + if (bank->bank_number < 0 || bank->bank_number > 1) { + /* Invalid bank number somehow */ + return ERROR_FAIL; + } + + if (!msp432_bank->probed[bank->bank_number]) + retval = msp432_probe(bank); + + return retval; +} + +static int msp432_protect_check(struct flash_bank *bank) +{ + return ERROR_OK; +} + +static int msp432_info(struct flash_bank *bank, char *buf, int buf_size) +{ + struct msp432_bank *msp432_bank = bank->driver_priv; + int printed = 0; + + switch (msp432_bank->device_type) { + case MSP432P401X_DEPR: + if (0xFFFF == msp432_bank->device_id) { + /* Very early pre-production silicon currently deprecated */ + printed = snprintf(buf, buf_size, + "MSP432P401x pre-production device (deprecated silicon)\n" + SUPPORT_MESSAGE); + } else { + /* Revision A or B silicon, also deprecated */ + printed = snprintf(buf, buf_size, + "MSP432P401x Device Rev %c (deprecated silicon)\n" + SUPPORT_MESSAGE, (char)msp432_bank->hardware_rev); + } + break; + case MSP432P401X: + printed = snprintf(buf, buf_size, + "MSP432P401x Device Rev %c\n", + (char)msp432_bank->hardware_rev); + break; + case MSP432P411X: + printed = snprintf(buf, buf_size, + "MSP432P411x Device Rev %c\n", + (char)msp432_bank->hardware_rev); + break; + case MSP432E401Y: + printed = snprintf(buf, buf_size, "MSP432E401Y Device\n"); + break; + case MSP432E411Y: + printed = snprintf(buf, buf_size, "MSP432E411Y Device\n"); + break; + case MSP432E4X_GUESS: + printed = snprintf(buf, buf_size, + "Unrecognized MSP432E4 DID0 and DID1 IDs (%08X, %08X)", + msp432_bank->device_id, msp432_bank->hardware_rev); + break; + case MSP432P401X_GUESS: + case MSP432P411X_GUESS: + default: + printed = snprintf(buf, buf_size, + "Unrecognized MSP432P4 Device ID and Hardware Rev (%04X, %02X)", + msp432_bank->device_id, msp432_bank->hardware_rev); + break; + } + + buf_size -= printed; + + if (0 > buf_size) + return ERROR_BUF_TOO_SMALL; + + return ERROR_OK; +} + +static void msp432_flash_free_driver_priv(struct flash_bank *bank) +{ + /* A single private struct is shared between main and info banks */ + /* Only free it on the call for main bank (#0) */ + if ((0 == bank->bank_number) && (NULL != bank->driver_priv)) + free(bank->driver_priv); + /* Forget about the private struct on both main and info banks */ + bank->driver_priv = NULL; +} + +static const struct command_registration msp432_exec_command_handlers[] = { + { + .name = "mass_erase", + .handler = msp432_mass_erase_command, + .mode = COMMAND_EXEC, + .help = "Erase entire flash memory on device.", + .usage = "['main' | 'all']", + }, + { + .name = "bsl", + .handler = msp432_bsl_command, + .mode = COMMAND_EXEC, + .help = "Allow BSL to be erased or written by flash commands.", + .usage = "['unlock' | 'lock']", + }, + COMMAND_REGISTRATION_DONE +}; + +static const struct command_registration msp432_command_handlers[] = { + { + .name = "msp432", + .mode = COMMAND_EXEC, + .help = "MSP432 flash command group", + .usage = "", + .chain = msp432_exec_command_handlers, + }, + COMMAND_REGISTRATION_DONE +}; + +struct flash_driver msp432_flash = { + .name = "msp432", + .commands = msp432_command_handlers, + .flash_bank_command = msp432_flash_bank_command, + .erase = msp432_erase, + .protect = msp432_protect, + .write = msp432_write, + .read = default_flash_read, + .probe = msp432_probe, + .auto_probe = msp432_auto_probe, + .erase_check = default_flash_blank_check, + .protect_check = msp432_protect_check, + .info = msp432_info, + .free_driver_priv = msp432_flash_free_driver_priv, +}; diff --git a/src/flash/nor/msp432.h b/src/flash/nor/msp432.h new file mode 100644 index 0000000..ffefa8f --- /dev/null +++ b/src/flash/nor/msp432.h @@ -0,0 +1,127 @@ +/*************************************************************************** + * Copyright (C) 2018 by Texas Instruments, Inc. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#ifndef OPENOCD_FLASH_NOR_MSP432_H +#define OPENOCD_FLASH_NOR_MSP432_H + +/* MSP432 family types */ +#define MSP432_NO_FAMILY 0 /* Family type not determined yet */ +#define MSP432E4 1 /* MSP432E4 family of devices */ +#define MSP432P4 2 /* MSP432P4 family of devices */ + +/* MSP432 device types */ +#define MSP432_NO_TYPE 0 /* Device type not determined yet */ +#define MSP432P401X_DEPR 1 /* Early MSP432P401x offerings, now deprecated */ +#define MSP432P401X 2 /* MSP432P401x device, revision C or higher */ +#define MSP432P411X 3 /* MSP432P411x device, revision A or higher */ +#define MSP432P401X_GUESS 4 /* Assuming it's an MSP432P401x device */ +#define MSP432P411X_GUESS 5 /* Assuming it's an MSP432P411x device */ +#define MSP432E401Y 6 /* MSP432E401Y device */ +#define MSP432E411Y 7 /* MSP432E401Y device */ +#define MSP432E4X_GUESS 8 /* Assuming it's an MSP432E4x device */ + +/* MSP432P4 flash parameters */ +#define P4_FLASH_MAIN_BASE 0x00000000 +#define P4_FLASH_INFO_BASE 0x00200000 +#define P4_SECTOR_LENGTH 0x1000 +#define P4_ALGO_ENTRY_ADDR 0x01000110 + +/* MSP432E4 flash paramters */ +#define E4_FLASH_BASE 0x00000000 +#define E4_FLASH_SIZE 0x100000 +#define E4_SECTOR_LENGTH 0x4000 +#define E4_ALGO_ENTRY_ADDR 0x20000110 + +/* Flash helper algorithm key addresses */ +#define ALGO_BASE_ADDR 0x20000000 +#define ALGO_BUFFER1_ADDR 0x20002000 +#define ALGO_BUFFER2_ADDR 0x20003000 +#define ALGO_PARAMS_BASE_ADDR 0x20000150 +#define ALGO_FLASH_COMMAND_ADDR 0x20000150 +#define ALGO_RETURN_CODE_ADDR 0x20000154 +#define ALGO_FLASH_DEST_ADDR 0x2000015c +#define ALGO_FLASH_LENGTH_ADDR 0x20000160 +#define ALGO_BUFFER1_STATUS_ADDR 0x20000164 +#define ALGO_BUFFER2_STATUS_ADDR 0x20000168 +#define ALGO_ERASE_PARAM_ADDR 0x2000016c +#define ALGO_UNLOCK_BSL_ADDR 0x20000170 +#define ALGO_STACK_POINTER_ADDR 0x20002000 + +/* Flash helper algorithm key sizes */ +#define ALGO_BUFFER_SIZE 0x1000 +#define ALGO_WORKING_SIZE (ALGO_BUFFER2_ADDR + 0x1000 - ALGO_BASE_ADDR) + +/* Flash helper algorithm flash commands */ +#define FLASH_NO_COMMAND 0 +#define FLASH_MASS_ERASE 1 +#define FLASH_SECTOR_ERASE 2 +#define FLASH_PROGRAM 4 +#define FLASH_INIT 8 +#define FLASH_EXIT 16 +#define FLASH_CONTINUOUS 32 + +/* Flash helper algorithm return codes */ +#define FLASH_BUSY 0x00000001 +#define FLASH_SUCCESS 0x00000ACE +#define FLASH_ERROR 0x0000DEAD +#define FLASH_TIMEOUT_ERROR 0xDEAD0000 +#define FLASH_VERIFY_ERROR 0xDEADDEAD +#define FLASH_WRONG_COMMAND 0x00000BAD +#define FLASH_POWER_ERROR 0x00DEAD00 + +/* Flash helper algorithm buffer status values */ +#define BUFFER_INACTIVE 0x00 +#define BUFFER_ACTIVE 0x01 +#define BUFFER_DATA_READY 0x10 + +/* Flash helper algorithm erase parameters */ +#define FLASH_ERASE_MAIN 0x01 +#define FLASH_ERASE_INFO 0x02 + +/* Flash helper algorithm lock/unlock BSL options */ +#define FLASH_LOCK_BSL 0x00 +#define FLASH_UNLOCK_BSL 0x0b + +/* Flash helper algorithm parameter block struct */ +struct msp432_algo_params { + uint8_t flash_command[4]; + uint8_t return_code[4]; + uint8_t _reserved0[4]; + uint8_t address[4]; + uint8_t length[4]; + uint8_t buffer1_status[4]; + uint8_t buffer2_status[4]; + uint8_t erase_param[4]; + uint8_t unlock_bsl[4]; +}; + +/* Flash helper algorithm for MSP432P401x targets */ +const uint8_t msp432p401x_algo[] = { +#include "../../../contrib/loaders/flash/msp432/msp432p401x_algo.inc" +}; + +/* Flash helper algorithm for MSP432P411x targets */ +const uint8_t msp432p411x_algo[] = { +#include "../../../contrib/loaders/flash/msp432/msp432p411x_algo.inc" +}; + +/* Flash helper algorithm for MSP432E4x targets */ +const uint8_t msp432e4x_algo[] = { +#include "../../../contrib/loaders/flash/msp432/msp432e4x_algo.inc" +}; + +#endif /* OPENOCD_FLASH_NOR_MSP432_H */ diff --git a/src/flash/nor/nrf5.c b/src/flash/nor/nrf5.c index 31dd5aa..16459c7 100644 --- a/src/flash/nor/nrf5.c +++ b/src/flash/nor/nrf5.c @@ -108,6 +108,7 @@ enum nrf5_nvmc_config_bits { struct nrf5_info { uint32_t code_page_size; + uint32_t refcount; struct { bool probed; @@ -204,6 +205,7 @@ static const struct nrf5_device_spec nrf5_known_devices_table[] = { /* nRF52832 Devices */ NRF5_DEVICE_DEF(0x00C7, "52832", "QFAA", "B0", 512), + NRF5_DEVICE_DEF(0x0139, "52832", "QFAA", "E0", 512), }; static int nrf5_bank_is_probed(struct flash_bank *bank) @@ -531,7 +533,6 @@ static int nrf5_probe(struct flash_bank *bank) bank->sectors[0].size = bank->size; bank->sectors[0].offset = 0; - /* mark as unknown */ bank->sectors[0].is_erased = 0; bank->sectors[0].is_protected = 0; @@ -553,17 +554,6 @@ static int nrf5_auto_probe(struct flash_bank *bank) return nrf5_probe(bank); } -static struct flash_sector *nrf5_find_sector_by_address(struct flash_bank *bank, uint32_t address) -{ - struct nrf5_info *chip = bank->driver_priv; - - for (int i = 0; i < bank->num_sectors; i++) - if (bank->sectors[i].offset <= address && - address < (bank->sectors[i].offset + chip->code_page_size)) - return &bank->sectors[i]; - return NULL; -} - static int nrf5_erase_all(struct nrf5_info *chip) { LOG_DEBUG("Erasing all non-volatile memory"); @@ -615,9 +605,6 @@ static int nrf5_erase_page(struct flash_bank *bank, sector->offset); } - if (res == ERROR_OK) - sector->is_erased = 1; - return res; } @@ -743,48 +730,22 @@ static int nrf5_write_pages(struct flash_bank *bank, uint32_t start, uint32_t en { int res = ERROR_FAIL; struct nrf5_info *chip = bank->driver_priv; - struct flash_sector *sector; - uint32_t offset; assert(start % chip->code_page_size == 0); assert(end % chip->code_page_size == 0); - /* Erase all sectors */ - for (offset = start; offset < end; offset += chip->code_page_size) { - sector = nrf5_find_sector_by_address(bank, offset); - if (!sector) { - LOG_ERROR("Invalid sector @ 0x%08"PRIx32, offset); - return ERROR_FLASH_SECTOR_INVALID; - } - - if (sector->is_protected) { - LOG_ERROR("Can't erase protected sector @ 0x%08"PRIx32, offset); - goto error; - } - - if (sector->is_erased != 1) { /* 1 = erased, 0= not erased, -1 = unknown */ - res = nrf5_erase_page(bank, chip, sector); - if (res != ERROR_OK) { - LOG_ERROR("Failed to erase sector @ 0x%08"PRIx32, sector->offset); - goto error; - } - } - sector->is_erased = 0; - } - res = nrf5_nvmc_write_enable(chip); if (res != ERROR_OK) goto error; res = nrf5_ll_flash_write(chip, start, buffer, (end - start)); if (res != ERROR_OK) - goto set_read_only; + goto error; return nrf5_nvmc_read_only(chip); -set_read_only: - nrf5_nvmc_read_only(chip); error: + nrf5_nvmc_read_only(chip); LOG_ERROR("Failed to write to nrf5 flash"); return res; } @@ -876,11 +837,9 @@ static int nrf5_uicr_flash_write(struct flash_bank *bank, if (res != ERROR_OK) return res; - if (sector->is_erased != 1) { - res = nrf5_erase_page(bank, chip, sector); - if (res != ERROR_OK) - return res; - } + res = nrf5_erase_page(bank, chip, sector); + if (res != ERROR_OK) + return res; res = nrf5_nvmc_write_enable(chip); if (res != ERROR_OK) @@ -911,6 +870,18 @@ static int nrf5_write(struct flash_bank *bank, const uint8_t *buffer, return chip->bank[bank->bank_number].write(bank, chip, buffer, offset, count); } +static void nrf5_free_driver_priv(struct flash_bank *bank) +{ + struct nrf5_info *chip = bank->driver_priv; + if (chip == NULL) + return; + + chip->refcount--; + if (chip->refcount == 0) { + free(chip); + bank->driver_priv = NULL; + } +} FLASH_BANK_COMMAND_HANDLER(nrf5_flash_bank_command) { @@ -946,6 +917,7 @@ FLASH_BANK_COMMAND_HANDLER(nrf5_flash_bank_command) break; } + chip->refcount++; chip->bank[bank->bank_number].probed = false; bank->driver_priv = chip; @@ -992,9 +964,6 @@ COMMAND_HANDLER(nrf5_handle_mass_erase_command) return res; } - for (int i = 0; i < bank->num_sectors; i++) - bank->sectors[i].is_erased = 1; - res = nrf5_protect_check(bank); if (res != ERROR_OK) { LOG_ERROR("Failed to check chip's write protection"); @@ -1005,8 +974,6 @@ COMMAND_HANDLER(nrf5_handle_mass_erase_command) if (res != ERROR_OK) return res; - bank->sectors[0].is_erased = 1; - return ERROR_OK; } @@ -1175,6 +1142,7 @@ struct flash_driver nrf5_flash = { .auto_probe = nrf5_auto_probe, .erase_check = default_flash_blank_check, .protect_check = nrf5_protect_check, + .free_driver_priv = nrf5_free_driver_priv, }; /* We need to retain the flash-driver name as well as the commands @@ -1192,4 +1160,5 @@ struct flash_driver nrf51_flash = { .auto_probe = nrf5_auto_probe, .erase_check = default_flash_blank_check, .protect_check = nrf5_protect_check, + .free_driver_priv = nrf5_free_driver_priv, }; diff --git a/src/flash/nor/psoc5lp.c b/src/flash/nor/psoc5lp.c index ae8e3d3..b88abbb 100644 --- a/src/flash/nor/psoc5lp.c +++ b/src/flash/nor/psoc5lp.c @@ -234,7 +234,8 @@ static void psoc5lp_get_part_number(const struct psoc5lp_device *dev, char *str) } /* Package does not matter. */ - strncpy(str + 8, "xx", 2); + str[8] = 'x'; + str[9] = 'x'; /* Temperate range cannot uniquely be identified. */ str[10] = 'x'; @@ -859,6 +860,7 @@ struct flash_driver psoc5lp_nvl_flash = { .erase = psoc5lp_nvl_erase, .erase_check = psoc5lp_nvl_erase_check, .write = psoc5lp_nvl_write, + .free_driver_priv = default_flash_free_driver_priv, }; /* @@ -1067,6 +1069,7 @@ struct flash_driver psoc5lp_eeprom_flash = { .erase = psoc5lp_eeprom_erase, .erase_check = default_flash_blank_check, .write = psoc5lp_eeprom_write, + .free_driver_priv = default_flash_free_driver_priv, }; /* @@ -1077,6 +1080,10 @@ struct psoc5lp_flash_bank { bool probed; const struct psoc5lp_device *device; bool ecc_enabled; + /* If ecc is disabled, num_sectors counts both std and ecc sectors. + * If ecc is enabled, num_sectors indicates just the number of std sectors. + * However ecc sector descriptors bank->sector[num_sectors..2*num_sectors-1] + * are used for driver private flash operations */ }; static int psoc5lp_erase(struct flash_bank *bank, int first, int last) @@ -1121,21 +1128,25 @@ static int psoc5lp_erase_check(struct flash_bank *bank) return ERROR_TARGET_NOT_HALTED; } + int num_sectors = bank->num_sectors; + if (psoc_bank->ecc_enabled) + num_sectors *= 2; /* count both std and ecc sector always */ + struct target_memory_check_block *block_array; - block_array = malloc(bank->num_sectors * sizeof(struct target_memory_check_block)); + block_array = malloc(num_sectors * sizeof(struct target_memory_check_block)); if (block_array == NULL) return ERROR_FAIL; - for (i = 0; i < bank->num_sectors; i++) { + for (i = 0; i < num_sectors; i++) { block_array[i].address = bank->base + bank->sectors[i].offset; block_array[i].size = bank->sectors[i].size; block_array[i].result = UINT32_MAX; /* erase state unknown */ } bool fast_check = true; - for (i = 0; i < bank->num_sectors; ) { + for (i = 0; i < num_sectors; ) { retval = armv7m_blank_check_memory(target, - block_array + i, bank->num_sectors - i, + block_array + i, num_sectors - i, bank->erased_value); if (retval < 1) { /* Run slow fallback if the first run gives no result @@ -1148,15 +1159,15 @@ static int psoc5lp_erase_check(struct flash_bank *bank) } if (fast_check) { - if (!psoc_bank->ecc_enabled) { - int half_sectors = bank->num_sectors / 2; - for (i = 0; i < half_sectors / 2; i++) + if (psoc_bank->ecc_enabled) { + for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = (block_array[i].result != 1) - ? block_array[i + half_sectors].result - : block_array[i].result; + ? block_array[i].result + : block_array[i + bank->num_sectors].result; + /* if std sector is erased, use status of ecc sector */ } else { - for (i = 0; i < bank->num_sectors; i++) + for (i = 0; i < num_sectors; i++) bank->sectors[i].is_erased = block_array[i].result; } retval = ERROR_OK; @@ -1571,4 +1582,5 @@ struct flash_driver psoc5lp_flash = { .erase = psoc5lp_erase, .erase_check = psoc5lp_erase_check, .write = psoc5lp_write, + .free_driver_priv = default_flash_free_driver_priv, }; diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c index 015988a..faada9a 100644 --- a/src/flash/nor/stm32f1x.c +++ b/src/flash/nor/stm32f1x.c @@ -585,8 +585,10 @@ static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer, retval = target_write_buffer(target, write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code); - if (retval != ERROR_OK) + if (retval != ERROR_OK) { + target_free_working_area(target, write_algorithm); return retval; + } /* memory buffer */ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c index 8013e58..413d04d 100644 --- a/src/flash/nor/stm32f2x.c +++ b/src/flash/nor/stm32f2x.c @@ -252,6 +252,8 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout) /* Clear but report errors */ if (status & FLASH_ERROR) { + if (retval == ERROR_OK) + retval = ERROR_FAIL; /* If this operation fails, we ignore it and report the original * retval */ @@ -597,8 +599,10 @@ static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer, retval = target_write_buffer(target, write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code); - if (retval != ERROR_OK) + if (retval != ERROR_OK) { + target_free_working_area(target, write_algorithm); return retval; + } /* memory buffer */ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { diff --git a/src/flash/nor/stm32h7x.c b/src/flash/nor/stm32h7x.c index 009eb9b..fcfcf91 100644 --- a/src/flash/nor/stm32h7x.c +++ b/src/flash/nor/stm32h7x.c @@ -64,7 +64,7 @@ #define FLASH_WRPERR (1 << 17) /* Write protection error */ #define FLASH_PGSERR (1 << 18) /* Programming sequence error */ #define FLASH_STRBERR (1 << 19) /* Strobe error */ -#define FLASH_INCERR (1 << 21) /* Increment error */ +#define FLASH_INCERR (1 << 21) /* Inconsistency error */ #define FLASH_OPERR (1 << 22) /* Operation error */ #define FLASH_RDPERR (1 << 23) /* Read Protection error */ #define FLASH_RDSERR (1 << 24) /* Secure Protection error */ @@ -220,6 +220,8 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout) /* Clear error + EOP flags but report errors */ if (status & FLASH_ERROR) { + if (retval == ERROR_OK) + retval = ERROR_FAIL; /* If this operation fails, we ignore it and report the original retval */ target_write_u32(target, stm32x_get_flash_reg(bank, FLASH_CCR), status); } @@ -495,7 +497,7 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last) retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT); if (retval != ERROR_OK) { - LOG_ERROR("erase time-out error sector %d", i); + LOG_ERROR("erase time-out or operation error sector %d", i); return retval; } bank->sectors[i].is_erased = 1; @@ -581,8 +583,10 @@ static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer, retval = target_write_buffer(target, write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code); - if (retval != ERROR_OK) + if (retval != ERROR_OK) { + target_free_working_area(target, write_algorithm); return retval; + } /* memory buffer */ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) { diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c index e47313c..4fb7e03 100644 --- a/src/flash/nor/stm32l4x.c +++ b/src/flash/nor/stm32l4x.c @@ -187,6 +187,8 @@ static int stm32l4_wait_status_busy(struct flash_bank *bank, int timeout) /* Clear but report errors */ if (status & FLASH_ERROR) { + if (retval == ERROR_OK) + retval = ERROR_FAIL; /* If this operation fails, we ignore it and report the original * retval */ @@ -474,8 +476,10 @@ static int stm32l4_write_block(struct flash_bank *bank, const uint8_t *buffer, retval = target_write_buffer(target, write_algorithm->address, sizeof(stm32l4_flash_write_code), stm32l4_flash_write_code); - if (retval != ERROR_OK) + if (retval != ERROR_OK) { + target_free_working_area(target, write_algorithm); return retval; + } /* memory buffer */ while (target_alloc_working_area_try(target, buffer_size, &source) != diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c index c68d7c2..3251df3 100644 --- a/src/flash/nor/stm32lx.c +++ b/src/flash/nor/stm32lx.c @@ -146,7 +146,7 @@ static const struct stm32lx_rev stm32_425_revs[] = { { 0x1000, "A" }, { 0x2000, "B" }, { 0x2008, "Y" }, }; static const struct stm32lx_rev stm32_427_revs[] = { - { 0x1000, "A" }, { 0x1018, "Y" }, { 0x1038, "X" }, + { 0x1000, "A" }, { 0x1018, "Y" }, { 0x1038, "X" }, { 0x10f8, "V" }, }; static const struct stm32lx_rev stm32_429_revs[] = { { 0x1000, "A" }, { 0x1018, "Z" }, diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c index 34681db..95ca819 100644 --- a/src/flash/nor/tcl.c +++ b/src/flash/nor/tcl.c @@ -288,24 +288,6 @@ COMMAND_HANDLER(handle_flash_erase_address_command) return retval; } -static int flash_check_sector_parameters(struct command_context *cmd_ctx, - uint32_t first, uint32_t last, uint32_t num_sectors) -{ - if (!(first <= last)) { - command_print(cmd_ctx, "ERROR: " - "first sector must be <= last sector"); - return ERROR_FAIL; - } - - if (!(last <= (num_sectors - 1))) { - command_print(cmd_ctx, "ERROR: last sector must be <= %" PRIu32, - num_sectors - 1); - return ERROR_FAIL; - } - - return ERROR_OK; -} - COMMAND_HANDLER(handle_flash_erase_command) { if (CMD_ARGC != 3) @@ -327,9 +309,18 @@ COMMAND_HANDLER(handle_flash_erase_command) else COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], last); - retval = flash_check_sector_parameters(CMD_CTX, first, last, p->num_sectors); - if (retval != ERROR_OK) - return retval; + if (!(first <= last)) { + command_print(CMD_CTX, "ERROR: " + "first sector must be <= last"); + return ERROR_FAIL; + } + + if (!(last <= (uint32_t)(p->num_sectors - 1))) { + command_print(CMD_CTX, "ERROR: " + "last sector must be <= %" PRIu32, + p->num_sectors - 1); + return ERROR_FAIL; + } struct duration bench; duration_start(&bench); @@ -375,15 +366,28 @@ COMMAND_HANDLER(handle_flash_protect_command) bool set; COMMAND_PARSE_ON_OFF(CMD_ARGV[3], set); - retval = flash_check_sector_parameters(CMD_CTX, first, last, num_blocks); - if (retval != ERROR_OK) - return retval; + if (!(first <= last)) { + command_print(CMD_CTX, "ERROR: " + "first %s must be <= last", + (p->num_prot_blocks) ? "block" : "sector"); + return ERROR_FAIL; + } + + if (!(last <= (uint32_t)(num_blocks - 1))) { + command_print(CMD_CTX, "ERROR: " + "last %s must be <= %" PRIu32, + (p->num_prot_blocks) ? "block" : "sector", + num_blocks - 1); + return ERROR_FAIL; + } retval = flash_driver_protect(p, set, first, last); if (retval == ERROR_OK) { - command_print(CMD_CTX, "%s protection for sectors %" PRIu32 + command_print(CMD_CTX, "%s protection for %s %" PRIu32 " through %" PRIu32 " on flash bank %d", - (set) ? "set" : "cleared", first, last, p->bank_number); + (set) ? "set" : "cleared", + (p->num_prot_blocks) ? "blocks" : "sectors", + first, last, p->bank_number); } return retval; @@ -502,7 +506,7 @@ COMMAND_HANDLER(handle_flash_fill_command) if (count == 0) return ERROR_OK; - if (address + count >= bank->base + bank->size) { + if (address + count * wordsize > bank->base + bank->size) { LOG_ERROR("Cannot cross flash bank borders"); return ERROR_FAIL; } diff --git a/src/flash/nor/tms470.c b/src/flash/nor/tms470.c index 102bf1b..2435e79 100644 --- a/src/flash/nor/tms470.c +++ b/src/flash/nor/tms470.c @@ -151,6 +151,7 @@ static int tms470_read_part_info(struct flash_bank *bank) if (bank->sectors) { free(bank->sectors); bank->sectors = NULL; + bank->num_sectors = 0; } /* @@ -754,9 +755,6 @@ static int tms470_erase_sector(struct flash_bank *bank, int sector) target_write_u32(target, 0xFFFFFFDC, glbctrl); LOG_DEBUG("set glbctrl = 0x%08" PRIx32 "", glbctrl); - if (result == ERROR_OK) - bank->sectors[sector].is_erased = 1; - return result; } @@ -1044,27 +1042,17 @@ static int tms470_erase_check(struct flash_bank *bank) * an attempt to reduce the JTAG overhead. */ for (sector = 0; sector < bank->num_sectors; sector++) { - if (bank->sectors[sector].is_erased != 1) { - uint32_t i, addr = bank->base + bank->sectors[sector].offset; - - LOG_INFO("checking flash bank %d sector %d", tms470_info->ordinal, sector); - - target_read_buffer(target, addr, bank->sectors[sector].size, buffer); - - bank->sectors[sector].is_erased = 1; - for (i = 0; i < bank->sectors[sector].size; i++) { - if (buffer[i] != 0xff) { - LOG_WARNING("tms470 bank %d, sector %d, not erased.", - tms470_info->ordinal, - sector); - LOG_WARNING( - "at location 0x%08" PRIx32 ": flash data is 0x%02x.", - addr + i, - buffer[i]); - - bank->sectors[sector].is_erased = 0; - break; - } + uint32_t i, addr = bank->base + bank->sectors[sector].offset; + + LOG_INFO("checking flash bank %d sector %d", tms470_info->ordinal, sector); + + target_read_buffer(target, addr, bank->sectors[sector].size, buffer); + + bank->sectors[sector].is_erased = 1; + for (i = 0; i < bank->sectors[sector].size; i++) { + if (buffer[i] != 0xff) { + bank->sectors[sector].is_erased = 0; + break; } } if (bank->sectors[sector].is_erased != 1) { |