coding style: avoid unnecessary line continuations

Line continuation, adding a backslash as last char of the line, is
requested in multi-line macro definition, but is not necessary in
the rest of C code.

Remove it where present.

Identified by checkpatch script from Linux kernel v5.1 using the
command

	find src/ -type f -exec ./tools/scripts/checkpatch.pl \
	-q --types LINE_CONTINUATIONS -f {} \;

Change-Id: Id0c69e93456731717a7b290b16580e9f8ae741bc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5619
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins

6 files changed, 17 insertions, 17 deletions

diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c
index 73884b7..50ab207 100644
--- a/src/flash/nor/cfi.c
+++ b/src/flash/nor/cfi.c
@@ -2895,7 +2895,7 @@ int cfi_probe(struct flash_bank *bank)
 		}
 		if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width)) {
 			LOG_WARNING(
-				"CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \
+				"CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "",
 				(cfi_info->dev_size * bank->bus_width / bank->chip_width),
 				offset);
 		}
diff --git a/src/flash/nor/fespi.c b/src/flash/nor/fespi.c
index 5d8f810..90242b1 100644
--- a/src/flash/nor/fespi.c
+++ b/src/flash/nor/fespi.c
@@ -182,7 +182,7 @@ static int fespi_read_reg(struct flash_bank *bank, uint32_t *value, target_addr_
 }
 
 static int fespi_write_reg(struct flash_bank *bank, target_addr_t address, uint32_t value)
-{								\
+{
 	struct target *target = bank->target;
 	struct fespi_flash_bank *fespi_info = bank->driver_priv;
 
diff --git a/src/flash/nor/kinetis_ke.c b/src/flash/nor/kinetis_ke.c
index 27b6d3a..cfc0492 100644
--- a/src/flash/nor/kinetis_ke.c
+++ b/src/flash/nor/kinetis_ke.c
@@ -814,7 +814,7 @@ static int kinetis_ke_protect_check(struct flash_bank *bank)
 
 		kinfo->protection_size = 0;
 	} else {
-		LOG_WARNING("Flash protected. FPOPEN=%i FPLDIS=%i FPHDIS=%i FPLS=%i FPHS=%i", \
+		LOG_WARNING("Flash protected. FPOPEN=%i FPLDIS=%i FPHDIS=%i FPLS=%i FPHS=%i",
 					fpopen ? 1 : 0, fpldis ? 1 : 0, fphdis ? 1 : 0, fpls, fphs);
 
 		/* Retrieve which region is protected and how much */
diff --git a/src/flash/nor/lpcspifi.c b/src/flash/nor/lpcspifi.c
index 19d754b..04ac3bb 100644
--- a/src/flash/nor/lpcspifi.c
+++ b/src/flash/nor/lpcspifi.c
@@ -177,8 +177,8 @@ static int lpcspifi_set_hw_mode(struct flash_bank *bank)
 	retval = target_alloc_working_area(target, sizeof(spifi_init_code)
 		+ SPIFI_INIT_STACK_SIZE, &spifi_init_algorithm);
 	if (retval != ERROR_OK) {
-		LOG_ERROR("Insufficient working area to initialize SPIFI "\
-			"module. You must allocate at least %zdB of working "\
+		LOG_ERROR("Insufficient working area to initialize SPIFI "
+			"module. You must allocate at least %zdB of working "
 			"area in order to use this driver.",
 			sizeof(spifi_init_code) + SPIFI_INIT_STACK_SIZE
 		);
@@ -452,7 +452,7 @@ static int lpcspifi_erase(struct flash_bank *bank, int first, int last)
 	 * it, use a bulk erase instead of going sector-by-sector. */
 	if (first == 0 && last == (bank->num_sectors - 1)
 		&& lpcspifi_info->dev->chip_erase_cmd != lpcspifi_info->dev->erase_cmd) {
-		LOG_DEBUG("Chip supports the bulk erase command."\
+		LOG_DEBUG("Chip supports the bulk erase command."
 		" Will use bulk erase instead of sector-by-sector erase.");
 		retval = lpcspifi_bulk_erase(bank);
 
@@ -525,7 +525,7 @@ static int lpcspifi_erase(struct flash_bank *bank, int first, int last)
 	retval = target_alloc_working_area(target, sizeof(lpcspifi_flash_erase_code),
 		&erase_algorithm);
 	if (retval != ERROR_OK) {
-		LOG_ERROR("Insufficient working area. You must configure a working"\
+		LOG_ERROR("Insufficient working area. You must configure a working"
 			" area of at least %zdB in order to erase SPIFI flash.",
 			sizeof(lpcspifi_flash_erase_code));
 		return retval;
@@ -685,7 +685,7 @@ static int lpcspifi_write(struct flash_bank *bank, const uint8_t *buffer,
 
 	if (target_alloc_working_area(target, sizeof(lpcspifi_flash_write_code),
 			&write_algorithm) != ERROR_OK) {
-		LOG_ERROR("Insufficient working area. You must configure"\
+		LOG_ERROR("Insufficient working area. You must configure"
 			" a working area > %zdB in order to write to SPIFI flash.",
 			sizeof(lpcspifi_flash_write_code));
 		return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
@@ -707,15 +707,15 @@ static int lpcspifi_write(struct flash_bank *bank, const uint8_t *buffer,
 		 * space, free the algorithm */
 		target_free_working_area(target, write_algorithm);
 
-		LOG_ERROR("Insufficient working area. Please allocate at least"\
+		LOG_ERROR("Insufficient working area. Please allocate at least"
 			" %zdB of working area to enable flash writes.",
 			sizeof(lpcspifi_flash_write_code) + 1
 		);
 
 		return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 	} else if (fifo_size < page_size)
-		LOG_WARNING("Working area size is limited; flash writes may be"\
-			" slow. Increase working area size to at least %zdB"\
+		LOG_WARNING("Working area size is limited; flash writes may be"
+			" slow. Increase working area size to at least %zdB"
 			" to reduce write times.",
 			(size_t)(sizeof(lpcspifi_flash_write_code) + page_size)
 		);
diff --git a/src/flash/nor/mrvlqspi.c b/src/flash/nor/mrvlqspi.c
index 803e84a..7a06b3d 100644
--- a/src/flash/nor/mrvlqspi.c
+++ b/src/flash/nor/mrvlqspi.c
@@ -563,7 +563,7 @@ static int mrvlqspi_flash_erase(struct flash_bank *bank, int first, int last)
 	if (first == 0 && last == (bank->num_sectors - 1)
 		&& mrvlqspi_info->dev->chip_erase_cmd !=
 					mrvlqspi_info->dev->erase_cmd) {
-		LOG_DEBUG("Chip supports the bulk erase command."\
+		LOG_DEBUG("Chip supports the bulk erase command."
 		" Will use bulk erase instead of sector-by-sector erase.");
 		retval = mrvlqspi_bulk_erase(bank);
 		if (retval == ERROR_OK) {
@@ -681,7 +681,7 @@ static int mrvlqspi_flash_write(struct flash_bank *bank, const uint8_t *buffer,
 
 	if (target_alloc_working_area(target, sizeof(mrvlqspi_flash_write_code),
 			&write_algorithm) != ERROR_OK) {
-		LOG_ERROR("Insufficient working area. You must configure"\
+		LOG_ERROR("Insufficient working area. You must configure"
 			" a working area > %zdB in order to write to SPIFI flash.",
 			sizeof(mrvlqspi_flash_write_code));
 		return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
@@ -703,15 +703,15 @@ static int mrvlqspi_flash_write(struct flash_bank *bank, const uint8_t *buffer,
 		 * space, free the algorithm */
 		target_free_working_area(target, write_algorithm);
 
-		LOG_ERROR("Insufficient working area. Please allocate at least"\
+		LOG_ERROR("Insufficient working area. Please allocate at least"
 			" %zdB of working area to enable flash writes.",
 			sizeof(mrvlqspi_flash_write_code) + 1
 		);
 
 		return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 	} else if (fifo_size < page_size)
-		LOG_WARNING("Working area size is limited; flash writes may be"\
-			" slow. Increase working area size to at least %zdB"\
+		LOG_WARNING("Working area size is limited; flash writes may be"
+			" slow. Increase working area size to at least %zdB"
 			" to reduce write times.",
 			(size_t)(sizeof(mrvlqspi_flash_write_code) + page_size)
 		);
diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c
index 00bfeb1..fb2053b 100644
--- a/src/flash/nor/tcl.c
+++ b/src/flash/nor/tcl.c
@@ -1028,7 +1028,7 @@ COMMAND_HANDLER(handle_flash_padded_value_command)
 
 	COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], p->default_padded_value);
 
-	command_print(CMD, "Default padded value set to 0x%" PRIx8 " for flash bank %u", \
+	command_print(CMD, "Default padded value set to 0x%" PRIx8 " for flash bank %u",
 			p->default_padded_value, p->bank_number);
 
 	return retval;