archive branch__archive__

1 files changed, 0 insertions, 98 deletions

diff --git a/NEWS-0.4.0 b/NEWS-0.4.0
deleted file mode 100644
index cbd5526..0000000
--- a/NEWS-0.4.0
+++ /dev/null
@@ -1,98 +0,0 @@
-This file includes highlights of the changes made in the
-OpenOCD 0.4.0 source archive release.  See the repository
-history for details about what changed, including bugfixes
-and other issues not mentioned here.
-
-JTAG Layer:
-	Support KT-Link JTAG adapter.
-	Support USB-JTAG, Altera USB-Blaster and compatibles.
-
-Boundary Scan:
-
-Target Layer:
-	General
-		- Removed commands which have been obsolete for at least
-		  a year (from both documentation and, sometimes, code).
-		- new "reset-assert" event, for systems without SRST
-	ARM
-		- supports "reset-assert" event (except on Cortex-M3)
-		- renamed "armv4_5" command prefix as "arm"
-		- recognize TrustZone "Secure Monitor" mode
-		- "arm regs" command output changed
-		- register names use "sp" not "r13"
-		- add top-level "mcr" and "mrc" commands, replacing
-		  various core-specific operations
-		- basic semihosting support (ARM7/ARM9 only, for now)
-	ARM11
-		- Should act much more like other ARM cores:
-		   * Preliminary ETM and ETB hookup
-		   * accelerated "flash erase_check"
-		   * accelerated GDB memory checksum
-		   * support "arm regs" command
-		   * can access all core modes and registers
-		   * watchpoint support
-		- Shares some core debug code with Cortex-A8
-	Cortex-A8
-		- Should act much more like other ARM cores:
-		   * support "arm regs" command
-		   * can access all core modes and registers
-		   * watchpoint support
-		- Shares some core debug code with ARM11
-	Cortex-M3
-		- Exposed DWT registers like cycle counter
-		- vector_catch settings not clobbered by resets
-		- no longer interferes with firmware's fault handling
-	ETM, ETB
-		- "trigger_percent" command moved ETM --> ETB
-		- "etm trigger_debug" command added
-	MIPS
-		- use fastdata writes
-	Freescale DSP563xx cores (partial support)
-
-Flash Layer:
-	'flash bank' and 'nand device' take <bank_name> as first argument.
-	With this, flash/NAND commands allow referencing banks by name:
-		- <bank_name>: reference the bank with its defined name
-		- <driver_name>[.N]: reference the driver's Nth bank
-	New 'nand verify' command to check bank against an image file.
-	The "flash erase_address" command now rejects partial sectors;
-		previously it would silently erase extra data.  If you
-		want to erase the rest of the first and/or last sectors
-		instead of failing, you must pass an explicit "pad" flag.
-	New at91sam9 NAND controller driver.
-	New s3c64xx NAND controller driver.
-
-Board, Target, and Interface Configuration Scripts:
-	ARM9
-		- ETM and ETB hookup for iMX2* targets
-	Add $HOME/.openocd to the search path.
-	Handle Rev C of LM3S811 eval boards.
-		- use "luminary-lm3s811.cfg" for older boards
-		- use "luminary.cfg" for RevC and newer
-
-Core Jim/TCL Scripting:
-	New 'usage' command to provide terse command help.
-	Improved command 'help' command output (sorted and indented).
-	Improved command handling:
-		- Most boolean settings now accept any of the following:
-		  on/off, enable/disable, true/false, yes/no, 1/0
-		- More error checking and reporting.
-
-Documentation:
-	New built-in command development documentation and primer.
-
-Build and Release:
-	Use --enable-doxygen-pdf to build PDF developer documentation.
-	Consider upgrading to libftdi 0.17 if you use that library; it
-		includes bugfixes which improve FT2232H support.
-
-For more details about what has changed since the last release,
-see the git repository history.  With gitweb, you can browse that
-in various levels of detail.
-
-For older NEWS, see the NEWS files associated with each release
-(i.e. NEWS-<version>).
-
-For more information about contributing test reports, bug fixes, or new
-features and device support, please read the new Developer Manual (or
-the BUGS and PATCHES.txt files in the source archive).