Restore normal development cycle

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

3 files changed, 134 insertions, 99 deletions

diff --git a/NEWS b/NEWS
index 208146a..9db6c5f 100644
--- a/NEWS
+++ b/NEWS
@@ -2,126 +2,29 @@ This file includes highlights of the changes made in the OpenOCD
 source archive release.
 
 JTAG Layer:
-	* add default to adapter speed when unspecified (100 kHz)
-	* AM335X gpio (BeagleBones) adapter driver
-	* BCM2835 support for SWD
-	* Cadence Virtual Debug (vdebug) adapter driver
-	* CMSIS-DAP support for SWO and SWD multidrop
-	* Espressif USB JTAG Programmer adapter driver
-	* Remote bitbang support for Windows host
-	* ST-LINK add TCP server support to adapter driver
-	* SWD multidrop support
 
 Boundary Scan:
 
 Target Layer:
-	* aarch64: support watchpoints
-	* arm: support independent TPIU and SWO for trace
-	* arm adi v5: support Large Physical Address Extension
-	* arm adi v6: support added, for jtag and swd transport
-	* cortex_a: support watchpoints
-	* elf 64bit load support
-	* Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
-	* semihosting: support user defined operations
-	* Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
 
 Flash Layer:
-	* Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
-	* GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
-	* Nuvoton NPCX series support
-	* onsemi RSL10 support
-	* Raspberry Pi Pico RP2040 support
-	* ST BlueNRG-LPS support
-	* ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
-	* ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
 
 Board, Target, and Interface Configuration Scripts:
-	* Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
-	* Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
-	* Digilent Nexys Video board config
-	* Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
-	* Espressif ESP32 via ESP USB Bridge generic board config
-	* Espressif ESP32-S2 Kaluga 1 board config
-	* Espressif ESP32-S2 with ESP USB Bridge board config
-	* Espressif ESP32-S3 example board config
-	* Kontron SMARC-sAL28 board config
-	* LambdaConcept ECPIX-5 board config
-	* Microchip ATSAMA5D27-SOM1-EK1 board config
-	* Microchip EVB-LAN9255 board config
-	* Microchip SAME51 Curiosity Nano board config
-	* NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
-	* NXP RT6XX board config
-	* Olimex H405 board config
-	* Radiona ULX3S board config
-	* Raspberry Pi 3 and Raspberry Pi 4 model B board config
-	* Raspberry Pi Pico-Debug board config
-	* Renesas R-Car V3U Falcon board config
-	* ST BlueNRG-LPS steval-idb012v1 board config
-	* ST NUCLEO-8S208RB board config
-	* ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
-	* ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
-	* ST STM32MP13x-DK board config
-	* TI AM625 EVM, AM642 EVM and AM654 EVM board config
-	* TI J721E EVM, J721S2 EVM and J7200 EVM board config
-	* Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
-	* Cadence Xtensa generic and Xtensa VDebug target config
-	* Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
-	* Espressif ESP32, ESP32-S2 and ESP32-S3 target config
-	* Microchip ATSAMA5D2 series target config
-	* NanoXplore NG-Ultra SoC target config
-	* NXP IMX8QM target config
-	* NXP LS1028A, LS1046A and LS1088A target config
-	* NXP RT600 (Xtensa HiFi DSP) target config
-	* onsemi RSL10 target config
-	* Raspberry Pi Pico RP2040 target config
-	* Renesas R8A779A0 V3U target config
-	* Renesas RZ/Five target config
-	* Renesas RZ/G2 MPU family target config
-	* Rockchip RK3399 target config
-	* ST BlueNRG-LPS target config
-	* ST STM32MP13x target config
-	* TI AM625, AM654, J721E and J721S2 target config
-	* Ashling Opella-LD interface config
-	* Aspeed AST2600 linuxgpiod based interface config
-	* Blinkinlabs JTAG_Hat interface config
-	* Cadence Virtual Debug (vdebug) interface config
-	* Espressif ESP32-S2 Kaluga 1 board's interface config
-	* Espressif USB Bridge jtag interface config
-	* Infineon DAP miniWiggler V3 interface config
-	* PLS SPC5 interface config
-	* Tigard interface config
-	* Lattice MachXO3 family FPGA config
 
 Server Layer:
-	* GDB: add per-target remote protocol extensions
-	* GDB: more 'Z' packets support
-	* IPDBG JtagHost server functionality
-	* semihosting: I/O redirection to TCP server
-	* telnet: support for command's autocomplete
 
 RTOS:
-	* 'none' rtos support
-	* Zephyr rtos support
 
 Documentation:
 
 Build and Release:
-	* Add json extension to jimtcl build
-	* Drop dependency from libusb0
-	* Drop repository repo.or.cz for submodules
-	* Move gerrit to https://review.openocd.org/
-	* Require autoconf 2.69 or newer
-	* Update jep106 to revision JEP106BF.01
-	* Update jimtcl to version 0.81
-	* Update libjaylink to version 0.3.1
-	* New configure flag '--enable-jimtcl-maintainer' for jimtcl build
 
 
 This release also contains a number of other important functional and
 cosmetic bugfixes. For more details about what has changed since the
 last release, see the git repository history:
 
-http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
 
 
 For older NEWS, see the NEWS files associated with each release
diff --git a/NEWS-0.12.0 b/NEWS-0.12.0
new file mode 100644
index 0000000..208146a
--- /dev/null
+++ b/NEWS-0.12.0
@@ -0,0 +1,132 @@
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
+
+JTAG Layer:
+	* add default to adapter speed when unspecified (100 kHz)
+	* AM335X gpio (BeagleBones) adapter driver
+	* BCM2835 support for SWD
+	* Cadence Virtual Debug (vdebug) adapter driver
+	* CMSIS-DAP support for SWO and SWD multidrop
+	* Espressif USB JTAG Programmer adapter driver
+	* Remote bitbang support for Windows host
+	* ST-LINK add TCP server support to adapter driver
+	* SWD multidrop support
+
+Boundary Scan:
+
+Target Layer:
+	* aarch64: support watchpoints
+	* arm: support independent TPIU and SWO for trace
+	* arm adi v5: support Large Physical Address Extension
+	* arm adi v6: support added, for jtag and swd transport
+	* cortex_a: support watchpoints
+	* elf 64bit load support
+	* Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
+	* semihosting: support user defined operations
+	* Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
+
+Flash Layer:
+	* Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
+	* GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
+	* Nuvoton NPCX series support
+	* onsemi RSL10 support
+	* Raspberry Pi Pico RP2040 support
+	* ST BlueNRG-LPS support
+	* ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
+	* ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
+
+Board, Target, and Interface Configuration Scripts:
+	* Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config
+	* Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config
+	* Digilent Nexys Video board config
+	* Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
+	* Espressif ESP32 via ESP USB Bridge generic board config
+	* Espressif ESP32-S2 Kaluga 1 board config
+	* Espressif ESP32-S2 with ESP USB Bridge board config
+	* Espressif ESP32-S3 example board config
+	* Kontron SMARC-sAL28 board config
+	* LambdaConcept ECPIX-5 board config
+	* Microchip ATSAMA5D27-SOM1-EK1 board config
+	* Microchip EVB-LAN9255 board config
+	* Microchip SAME51 Curiosity Nano board config
+	* NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
+	* NXP RT6XX board config
+	* Olimex H405 board config
+	* Radiona ULX3S board config
+	* Raspberry Pi 3 and Raspberry Pi 4 model B board config
+	* Raspberry Pi Pico-Debug board config
+	* Renesas R-Car V3U Falcon board config
+	* ST BlueNRG-LPS steval-idb012v1 board config
+	* ST NUCLEO-8S208RB board config
+	* ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
+	* ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
+	* ST STM32MP13x-DK board config
+	* TI AM625 EVM, AM642 EVM and AM654 EVM board config
+	* TI J721E EVM, J721S2 EVM and J7200 EVM board config
+	* Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config
+	* Cadence Xtensa generic and Xtensa VDebug target config
+	* Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
+	* Espressif ESP32, ESP32-S2 and ESP32-S3 target config
+	* Microchip ATSAMA5D2 series target config
+	* NanoXplore NG-Ultra SoC target config
+	* NXP IMX8QM target config
+	* NXP LS1028A, LS1046A and LS1088A target config
+	* NXP RT600 (Xtensa HiFi DSP) target config
+	* onsemi RSL10 target config
+	* Raspberry Pi Pico RP2040 target config
+	* Renesas R8A779A0 V3U target config
+	* Renesas RZ/Five target config
+	* Renesas RZ/G2 MPU family target config
+	* Rockchip RK3399 target config
+	* ST BlueNRG-LPS target config
+	* ST STM32MP13x target config
+	* TI AM625, AM654, J721E and J721S2 target config
+	* Ashling Opella-LD interface config
+	* Aspeed AST2600 linuxgpiod based interface config
+	* Blinkinlabs JTAG_Hat interface config
+	* Cadence Virtual Debug (vdebug) interface config
+	* Espressif ESP32-S2 Kaluga 1 board's interface config
+	* Espressif USB Bridge jtag interface config
+	* Infineon DAP miniWiggler V3 interface config
+	* PLS SPC5 interface config
+	* Tigard interface config
+	* Lattice MachXO3 family FPGA config
+
+Server Layer:
+	* GDB: add per-target remote protocol extensions
+	* GDB: more 'Z' packets support
+	* IPDBG JtagHost server functionality
+	* semihosting: I/O redirection to TCP server
+	* telnet: support for command's autocomplete
+
+RTOS:
+	* 'none' rtos support
+	* Zephyr rtos support
+
+Documentation:
+
+Build and Release:
+	* Add json extension to jimtcl build
+	* Drop dependency from libusb0
+	* Drop repository repo.or.cz for submodules
+	* Move gerrit to https://review.openocd.org/
+	* Require autoconf 2.69 or newer
+	* Update jep106 to revision JEP106BF.01
+	* Update jimtcl to version 0.81
+	* Update libjaylink to version 0.3.1
+	* New configure flag '--enable-jimtcl-maintainer' for jimtcl build
+
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path=
+
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
+
+For more information about contributing test reports, bug fixes, or new
+features and device support, please read the new Developer Manual (or
+the BUGS and PATCHES.txt files in the source archive).
diff --git a/configure.ac b/configure.ac
index eee42d4..7f0955f 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
 AC_PREREQ([2.69])
-AC_INIT([openocd], [0.12.0],
+AC_INIT([openocd], [0.12.0+dev],
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 AC_CONFIG_AUX_DIR([build-aux])