diff options
author | Zachary T Welch <zw@superlucidity.net> | 2009-11-18 02:15:52 -0800 |
---|---|---|
committer | Zachary T Welch <zw@superlucidity.net> | 2009-11-19 13:39:41 -0800 |
commit | 2dfa5e9c844a5a3f8aaca146c874f13570b8f667 (patch) | |
tree | 30178e8d65d17c173619a3a8b9921b8d4f911210 | |
parent | fd654c8a3e3dbd5ab97eb6b3834ee462dd509a66 (diff) | |
download | riscv-openocd-2dfa5e9c844a5a3f8aaca146c874f13570b8f667.zip riscv-openocd-2dfa5e9c844a5a3f8aaca146c874f13570b8f667.tar.gz riscv-openocd-2dfa5e9c844a5a3f8aaca146c874f13570b8f667.tar.bz2 |
update 'flash bank' usage in scripts
Sets $_FLASHNAME to "$_CHIPNAME.flash" and passes it as the
first argument to 'flash bank'.
58 files changed, 138 insertions, 69 deletions
diff --git a/tcl/board/balloon3-cpu.cfg b/tcl/board/balloon3-cpu.cfg index 8a646b7..ecb1a28 100644 --- a/tcl/board/balloon3-cpu.cfg +++ b/tcl/board/balloon3-cpu.cfg @@ -10,4 +10,5 @@ reset_config trst_and_srst separate # flash bank <driver> <base> <size> <chip_width> <bus_width> # 29LV650 64Mbit Flash -flash bank cfi 0x00000000 0x800000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x800000 2 2 0 diff --git a/tcl/board/crossbow_tech_imote2.cfg b/tcl/board/crossbow_tech_imote2.cfg index a7d1215..88d4aa7 100644 --- a/tcl/board/crossbow_tech_imote2.cfg +++ b/tcl/board/crossbow_tech_imote2.cfg @@ -9,4 +9,5 @@ jtag_nsrst_delay 800 reset_config trst_and_srst separate # works for P30 flash -flash bank cfi 0x00000000 0x2000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x2000000 2 2 $_TARGETNAME diff --git a/tcl/board/csb337.cfg b/tcl/board/csb337.cfg index c2c4789..de19660 100644 --- a/tcl/board/csb337.cfg +++ b/tcl/board/csb337.cfg @@ -4,7 +4,8 @@ source [find target/at91rm9200.cfg] # boots from NOR on CS0: 8 MBytes CFI flash, 16-bit bus -flash bank cfi 0x10000000 0x00800000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x10000000 0x00800000 2 2 $_TARGETNAME # ETM9 trace port connector present on this board, 16 data pins. if { [info exists ETM_DRIVER] } { diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg index e6d17bd..3bc26ad 100644 --- a/tcl/board/digi_connectcore_wi-9c.cfg +++ b/tcl/board/digi_connectcore_wi-9c.cfg @@ -122,4 +122,5 @@ $_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x1000 -work-a #M29DW323DB - not working #flash bank cfi <base> <size> <chip width> <bus width> <target#> -flash bank cfi 0x50000000 0x0400000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x50000000 0x0400000 2 2 0 diff --git a/tcl/board/hammer.cfg b/tcl/board/hammer.cfg index ed83803..d366a45 100644 --- a/tcl/board/hammer.cfg +++ b/tcl/board/hammer.cfg @@ -33,4 +33,5 @@ $_TARGETNAME configure -event reset-init { #flash configuration #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...] -flash bank cfi 0x00000000 0x1000000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x1000000 2 2 0 diff --git a/tcl/board/hitex_lpc2929.cfg b/tcl/board/hitex_lpc2929.cfg index d0b2864..7d06f74 100644 --- a/tcl/board/hitex_lpc2929.cfg +++ b/tcl/board/hitex_lpc2929.cfg @@ -28,7 +28,8 @@ $_TARGETNAME configure -event reset-start { } # External 16-bit flash at chip select CS7 (SST39VF3201-70, 4 MiB) -flash bank cfi 0x5C000000 0x400000 2 2 $_TARGETNAME jedec_probe +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x5C000000 0x400000 2 2 $_TARGETNAME jedec_probe $_TARGETNAME configure -event reset-init { diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg index e7b7961..968d80e 100644 --- a/tcl/board/hitex_str9-comstick.cfg +++ b/tcl/board/hitex_str9-comstick.cfg @@ -68,5 +68,7 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank str9x 0x00000000 0x00080000 0 0 0 -flash bank str9x 0x00080000 0x00008000 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0 diff --git a/tcl/board/lubbock.cfg b/tcl/board/lubbock.cfg index 63cc2a4..32af386 100644 --- a/tcl/board/lubbock.cfg +++ b/tcl/board/lubbock.cfg @@ -12,8 +12,10 @@ jtag_ntrst_delay 250 # CS0, CS1 -- two banks of CFI flash, 32 MBytes each # each bank is 32-bits wide, two 16-bit chips in parallel -flash bank cfi 0x00000000 0x02000000 2 4 $_TARGETNAME -flash bank cfi 0x04000000 0x02000000 2 4 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x04000000 0x02000000 2 4 $_TARGETNAME # CS2 low -- FPGA registers # CS2 high -- 1 MByte SRAM at 0x0a00.0000 ... last 64K for scratch diff --git a/tcl/board/omap2420_h4.cfg b/tcl/board/omap2420_h4.cfg index c2190b5..12efa05 100644 --- a/tcl/board/omap2420_h4.cfg +++ b/tcl/board/omap2420_h4.cfg @@ -8,5 +8,7 @@ reset_config trst_and_srst separate # Board configs can vary a *LOT* ... parts, jumpers, etc. # This GP board boots from cs0 using NOR (2x32M), and also # has 64M NAND on cs6. -flash bank cfi 0x04000000 0x02000000 2 2 $_TARGETNAME -flash bank cfi 0x06000000 0x02000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x04000000 0x02000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x06000000 0x02000000 2 2 $_TARGETNAME diff --git a/tcl/board/osk5912.cfg b/tcl/board/osk5912.cfg index d78c6ef..c33ae28 100644 --- a/tcl/board/osk5912.cfg +++ b/tcl/board/osk5912.cfg @@ -19,8 +19,10 @@ etm_dummy config $_TARGETNAME # standard boards populate two 16 MB chips, but manufacturing # options or an expansion board could change this config. -flash bank cfi 0x00000000 0x01000000 2 2 $_TARGETNAME -flash bank cfi 0x01000000 0x01000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x01000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x01000000 0x01000000 2 2 $_TARGETNAME proc osk5912_init {} { omap5912_reset diff --git a/tcl/board/pxa255_sst.cfg b/tcl/board/pxa255_sst.cfg index 8bc691b..ce90387 100644 --- a/tcl/board/pxa255_sst.cfg +++ b/tcl/board/pxa255_sst.cfg @@ -13,7 +13,8 @@ source [find target/pxa255.cfg] $_TARGETNAME configure -work-area-phys 0x4000000 -work-area-size 0x4000 -work-area-backup 0 # flash bank <driver> <base> <size> <chip_width> <bus_width> <target> [options] -flash bank cfi 0x00000000 0x80000 2 2 $_TARGETNAME jedec_probe +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x80000 2 2 $_TARGETNAME jedec_probe proc pxa255_sst_init {} { xscale cp15 15 0x00002001 #Enable CP0 and CP13 access diff --git a/tcl/board/str910-eval.cfg b/tcl/board/str910-eval.cfg index fa872a9..0cf794a 100644 --- a/tcl/board/str910-eval.cfg +++ b/tcl/board/str910-eval.cfg @@ -54,8 +54,10 @@ $_TARGETNAME configure -event reset-init { } #flash bank str9x <base> <size> 0 0 <target#> <variant> -flash bank str9x 0x00000000 0x00080000 0 0 0 -flash bank str9x 0x00080000 0x00008000 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0 # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg index c4e5d67..0cbdb81 100644 --- a/tcl/board/telo.cfg +++ b/tcl/board/telo.cfg @@ -54,7 +54,8 @@ proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } # boots from NOR on CS0: 8 MBytes CFI flash, 16-bit bus # it's really 16MB but the upper 8mb is controller via gpio # openocd does not support 'complex reads/writes' to NOR -flash bank cfi 0x20000000 0x01000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x20000000 0x01000000 2 2 $_TARGETNAME # writing data to memory does not work without this memwrite burst disable
\ No newline at end of file diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg index ce7c87a..ae72c4b 100644 --- a/tcl/board/topas910.cfg +++ b/tcl/board/topas910.cfg @@ -115,4 +115,5 @@ arm7_9 dcc_downloads enable # Enable faster DCC downloads ##################### #flash bank cfi <base> <size> <chip width> <bus width> <target#> -flash bank cfi 0x20000000 0x2000000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x20000000 0x2000000 2 2 0 diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg index a8a6caf..5984f81 100644 --- a/tcl/board/topasa900.cfg +++ b/tcl/board/topasa900.cfg @@ -121,5 +121,6 @@ arm7_9 dcc_downloads enable # Enable faster DCC downloads ##################### #flash bank cfi <base> <size> <chip width> <bus width> <target#> -flash bank cfi 0x20000000 0x1000000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x20000000 0x1000000 2 2 0 diff --git a/tcl/board/unknown_at91sam9260.cfg b/tcl/board/unknown_at91sam9260.cfg index 2abd367..ad7b13c 100644 --- a/tcl/board/unknown_at91sam9260.cfg +++ b/tcl/board/unknown_at91sam9260.cfg @@ -91,6 +91,7 @@ $_TARGETNAME configure -event reset-init { ##################### #flash bank cfi <base> <size> <chip width> <bus width> <target#> -flash bank cfi 0x10000000 0x01000000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 0 diff --git a/tcl/board/x300t.cfg b/tcl/board/x300t.cfg index 3b09493..d914180 100644 --- a/tcl/board/x300t.cfg +++ b/tcl/board/x300t.cfg @@ -8,7 +8,8 @@ $_TARGETNAME configure -event reset-init { x300t_init } # 1MB CFI capable flash # flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank cfi 0xac000000 0x100000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0xac000000 0x100000 2 2 0 proc x300t_init { } { # Setup SDRAM config and flash mapping diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg index 54bb7bb..3f526d0 100644 --- a/tcl/board/zy1000.cfg +++ b/tcl/board/zy1000.cfg @@ -38,7 +38,8 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable -flash bank ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf $_TARGETNAME configure -event reset-init { # Set up chip selects & timings mww 0xFFE00000 0x0100273D diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg index b60c967..58cc9b9 100644 --- a/tcl/target/aduc702x.cfg +++ b/tcl/target/aduc702x.cfg @@ -35,7 +35,8 @@ $_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000 ## flash configuration # only target number is needed -flash bank aduc702x 0 0 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME aduc702x 0 0 0 0 0 ## If you use the watchdog, the following code makes sure that the board ## doesn't reboot when halted via JTAG. Yes, on the older generation diff --git a/tcl/target/at91eb40a.cfg b/tcl/target/at91eb40a.cfg index 8b3a9ec..e78ccea 100644 --- a/tcl/target/at91eb40a.cfg +++ b/tcl/target/at91eb40a.cfg @@ -42,7 +42,8 @@ arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable #flash driver -flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf # required for usable performance. Used for lots of # other things than flash programming. diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg index e8710f7..9069ae5 100644 --- a/tcl/target/at91r40008.cfg +++ b/tcl/target/at91r40008.cfg @@ -45,7 +45,8 @@ $_TARGETNAME configure -event gdb-flash-erase-start { $_TARGETNAME configure -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 -flash bank cfi 0x10000000 0x400000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x10000000 0x400000 2 2 $_TARGETNAME # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/at91sam3u1c.cfg b/tcl/target/at91sam3u1c.cfg index d338f30..47c227b 100644 --- a/tcl/target/at91sam3u1c.cfg +++ b/tcl/target/at91sam3u1c.cfg @@ -2,6 +2,7 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing -flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME diff --git a/tcl/target/at91sam3u1e.cfg b/tcl/target/at91sam3u1e.cfg index d338f30..47c227b 100644 --- a/tcl/target/at91sam3u1e.cfg +++ b/tcl/target/at91sam3u1e.cfg @@ -2,6 +2,7 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing -flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME diff --git a/tcl/target/at91sam3u2c.cfg b/tcl/target/at91sam3u2c.cfg index d338f30..47c227b 100644 --- a/tcl/target/at91sam3u2c.cfg +++ b/tcl/target/at91sam3u2c.cfg @@ -2,6 +2,7 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing -flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME diff --git a/tcl/target/at91sam3u2e.cfg b/tcl/target/at91sam3u2e.cfg index d338f30..47c227b 100644 --- a/tcl/target/at91sam3u2e.cfg +++ b/tcl/target/at91sam3u2e.cfg @@ -2,6 +2,7 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing -flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME diff --git a/tcl/target/at91sam3u4c.cfg b/tcl/target/at91sam3u4c.cfg index e8fdaba..e281287 100644 --- a/tcl/target/at91sam3u4c.cfg +++ b/tcl/target/at91sam3u4c.cfg @@ -2,8 +2,10 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing -flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME # This is a 256K chip, it has the 2nd bank -flash bank at91sam3 0x000100000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME diff --git a/tcl/target/at91sam3u4e.cfg b/tcl/target/at91sam3u4e.cfg index 9477ad0..242b53e 100644 --- a/tcl/target/at91sam3u4e.cfg +++ b/tcl/target/at91sam3u4e.cfg @@ -2,8 +2,10 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing -flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME # This is a 256K chip - it has the 2nd bank -flash bank at91sam3 0x000100000 0 1 1 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME diff --git a/tcl/target/at91sam7sx.cfg b/tcl/target/at91sam7sx.cfg index 2a7f90c..f3cc88e 100644 --- a/tcl/target/at91sam7sx.cfg +++ b/tcl/target/at91sam7sx.cfg @@ -49,7 +49,8 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>] -flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg index de7e9ab..690406b 100644 --- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -55,7 +55,8 @@ $_TARGETNAME configure -event reset-deassert-post {at91sam_init} # Flash configuration #flash bank cfi <base> <size> <chip width> <bus width> <target#> -flash bank cfi 0x10000000 0x01000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME proc at91sam_init { } { diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg index eaf4ee9..7e4599d 100644 --- a/tcl/target/epc9301.cfg +++ b/tcl/target/epc9301.cfg @@ -28,4 +28,5 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME #flash configuration #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...] -flash bank cfi 0x60000000 0x1000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x60000000 0x1000000 2 2 $_TARGETNAME diff --git a/tcl/target/faux.cfg b/tcl/target/faux.cfg index cc09ee3..6fe0cd7 100644 --- a/tcl/target/faux.cfg +++ b/tcl/target/faux.cfg @@ -26,4 +26,5 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 #dummy flash driver -flash bank faux 0x01000000 0x200000 2 2 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME faux 0x01000000 0x200000 2 2 0 diff --git a/tcl/target/lm3s1968.cfg b/tcl/target/lm3s1968.cfg index e54bbfe..330bb56 100644 --- a/tcl/target/lm3s1968.cfg +++ b/tcl/target/lm3s1968.cfg @@ -25,4 +25,5 @@ target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 #flash configuration -flash bank stellaris 0 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/lm3s3748.cfg b/tcl/target/lm3s3748.cfg index 5317a6d..274377a 100644 --- a/tcl/target/lm3s3748.cfg +++ b/tcl/target/lm3s3748.cfg @@ -25,4 +25,5 @@ target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 # flash configuration -- one bank of 128K -flash bank stellaris 0 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/lm3s6965.cfg b/tcl/target/lm3s6965.cfg index f0eb6b0..02d85d4 100644 --- a/tcl/target/lm3s6965.cfg +++ b/tcl/target/lm3s6965.cfg @@ -34,4 +34,5 @@ target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 #flash configuration -flash bank stellaris 0 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/lm3s811.cfg b/tcl/target/lm3s811.cfg index 8210696..49879d0 100644 --- a/tcl/target/lm3s811.cfg +++ b/tcl/target/lm3s811.cfg @@ -25,4 +25,5 @@ target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 #flash configuration -flash bank stellaris 0 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/lm3s9b9x.cfg b/tcl/target/lm3s9b9x.cfg index e822bb2..a727251 100644 --- a/tcl/target/lm3s9b9x.cfg +++ b/tcl/target/lm3s9b9x.cfg @@ -29,4 +29,5 @@ target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x4000 #flash configuration -flash bank stellaris 0 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg index 0b07d51..9a813f5 100644 --- a/tcl/target/lpc1768.cfg +++ b/tcl/target/lpc1768.cfg @@ -44,7 +44,8 @@ $_TARGETNAME configure -event reset-init { # LPC1768 has 512kB of user-available FLASH (bootloader is located in separate dedicated region). # flash bank lpc1700 <base> <size> 0 0 <target#> <variant> <cclk> [calc_checksum] -flash bank lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 12000 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 12000 calc_checksum # 4MHz / 6 = 666kHz, so use 500 jtag_khz 500 diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg index 0aadee8..13535f5 100644 --- a/tcl/target/lpc2103.cfg +++ b/tcl/target/lpc2103.cfg @@ -35,4 +35,5 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x2000 -work-a # 32kB of internal Flash, core clocked with 12MHz crystal # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum] -flash bank lpc2000 0x0 0x8000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x8000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg index 471286b..9a27aec 100644 --- a/tcl/target/lpc2124.cfg +++ b/tcl/target/lpc2124.cfg @@ -39,4 +39,5 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg index a686a47..287fa5d 100644 --- a/tcl/target/lpc2129.cfg +++ b/tcl/target/lpc2129.cfg @@ -38,4 +38,5 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg index 1f833e7..cf6287c 100644 --- a/tcl/target/lpc2148.cfg +++ b/tcl/target/lpc2148.cfg @@ -52,4 +52,5 @@ $_TARGETNAME configure -event reset-init { } # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum] -flash bank lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg index a34940e..d43d740 100644 --- a/tcl/target/lpc2294.cfg +++ b/tcl/target/lpc2294.cfg @@ -32,7 +32,8 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a #flash configuration #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> -flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg index aa3fad2..4e50ac5 100644 --- a/tcl/target/lpc2378.cfg +++ b/tcl/target/lpc2378.cfg @@ -43,7 +43,8 @@ $_TARGETNAME configure -event reset-init { # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader. # After reset the chip uses its internal 4MHz RC oscillator #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> -flash bank lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum # 4MHz / 6 = 666kHz, so use 500 jtag_khz 500 diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg index b0af4c0..d0bff1a 100644 --- a/tcl/target/lpc2478.cfg +++ b/tcl/target/lpc2478.cfg @@ -43,7 +43,8 @@ $_TARGETNAME configure -event reset-init { # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader. # After reset the chip uses its internal 4MHz RC oscillator. # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum] -flash bank lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum # Try to use RCLK, if RCLK is not available use "normal" mode. 4MHz / 6 = 666kHz, so use 500. jtag_rclk 500 diff --git a/tcl/target/lpc2900.cfg b/tcl/target/lpc2900.cfg index fa5bd5b..2371dd7 100644 --- a/tcl/target/lpc2900.cfg +++ b/tcl/target/lpc2900.cfg @@ -62,4 +62,5 @@ arm7_9 dcc_downloads enable # Flash bank configuration: # Flash: flash bank lpc2900 0 0 0 0 <target#> <flash clock (CLK_SYS_FMC) in kHz> # Flash base address, total flash size, and number of sectors are all configured automatically. -flash bank lpc2900 0 0 0 0 $_TARGETNAME $FLASH_CLOCK +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2900 0 0 0 0 $_TARGETNAME $FLASH_CLOCK diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg index e444889..2bc2294 100644 --- a/tcl/target/mega128.cfg +++ b/tcl/target/mega128.cfg @@ -22,7 +22,8 @@ target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME #$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 -flash bank avr 0 0 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME avr 0 0 0 0 0 #to use it, script will be like: #init diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg index 6127a54..a346c47 100644 --- a/tcl/target/pic32mx.cfg +++ b/tcl/target/pic32mx.cfg @@ -33,8 +33,10 @@ target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAM $_TARGETNAME configure -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 -flash bank pic32mx 0xbd000000 0 0 0 0 -flash bank pic32mx 0xbfc00000 0 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME pic32mx 0xbd000000 0 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME pic32mx 0xbfc00000 0 0 0 0 # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/sam7se512.cfg b/tcl/target/sam7se512.cfg index 0f1e412..d255067 100644 --- a/tcl/target/sam7se512.cfg +++ b/tcl/target/sam7se512.cfg @@ -35,5 +35,6 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>] -flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 diff --git a/tcl/target/sam7x256.cfg b/tcl/target/sam7x256.cfg index c3f7cd9..5bab642 100644 --- a/tcl/target/sam7x256.cfg +++ b/tcl/target/sam7x256.cfg @@ -46,7 +46,8 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>] -flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/smdk6410.cfg b/tcl/target/smdk6410.cfg index 7f15f8b..dd8bf87 100644 --- a/tcl/target/smdk6410.cfg +++ b/tcl/target/smdk6410.cfg @@ -5,4 +5,5 @@ source [find target/samsung_s3c6410.cfg] -flash bank cfi 0x00000000 0x00100000 2 2 $_TARGETNAME jedec_probe +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x00000000 0x00100000 2 2 $_TARGETNAME jedec_probe diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg index 242bbbe..463a85c 100644 --- a/tcl/target/stm32.cfg +++ b/tcl/target/stm32.cfg @@ -62,7 +62,8 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 -flash bank stm32x 0 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stm32x 0 0 0 0 $_TARGETNAME # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg index 8e5d36f..395a26c 100644 --- a/tcl/target/str710.cfg +++ b/tcl/target/str710.cfg @@ -39,8 +39,10 @@ $_TARGETNAME configure -event gdb-flash-erase-start { $_TARGETNAME configure -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 #flash bank str7x <base> <size> 0 0 <target#> <variant> -flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x -flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 0 STR71x +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 0 STR71x # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg index c98d56c..6432d15 100644 --- a/tcl/target/str730.cfg +++ b/tcl/target/str730.cfg @@ -42,5 +42,6 @@ $_TARGETNAME configure -event gdb-flash-erase-start { $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 0 STR3x diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg index 5439c33..496c4e3 100644 --- a/tcl/target/str750.cfg +++ b/tcl/target/str750.cfg @@ -45,6 +45,8 @@ $_TARGETNAME configure -event gdb-flash-erase-start { $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x -flash bank str7x 0x200C0000 0x00004000 0 0 0 STR75x +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 0 STR75x +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 0 STR75x diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg index 0dd6848..d844584 100644 --- a/tcl/target/str912.cfg +++ b/tcl/target/str912.cfg @@ -63,8 +63,10 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank str9x <base> <size> 0 0 <target#> <variant> -flash bank str9x 0x00000000 0x00080000 0 0 0 -flash bank str9x 0x00080000 0x00008000 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0 # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/telo.cfg b/tcl/target/telo.cfg index c4e5d67..0cbdb81 100644 --- a/tcl/target/telo.cfg +++ b/tcl/target/telo.cfg @@ -54,7 +54,8 @@ proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } # boots from NOR on CS0: 8 MBytes CFI flash, 16-bit bus # it's really 16MB but the upper 8mb is controller via gpio # openocd does not support 'complex reads/writes' to NOR -flash bank cfi 0x20000000 0x01000000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x20000000 0x01000000 2 2 $_TARGETNAME # writing data to memory does not work without this memwrite burst disable
\ No newline at end of file diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg index 9d258a5..fb02c68 100644 --- a/tcl/target/xba_revA3.cfg +++ b/tcl/target/xba_revA3.cfg @@ -79,7 +79,8 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 -flash bank cfi 0x50000000 0x400000 2 2 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x50000000 0x400000 2 2 $_TARGETNAME init reset init diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg index 40a7c1d..c3d8ed9 100644 --- a/tcl/test/syntax1.cfg +++ b/tcl/test/syntax1.cfg @@ -25,5 +25,6 @@ mvb 0xE01FC040 0x01 -flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 |