aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)AuthorFilesLines
2022-06-04target: add Espressif ESP32-S2 basic supportErhan Kurubas3-0/+77
ESP32-S2 is a single core Xtensa chip. Not full featured yet. Some of the missing functionality: -Semihosting -Flash breakpoints -Flash loader -Apptrace -FreeRTOS Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I2fb32978e801af5aa21616c581691406ad7cd6bb Reviewed-on: https://review.openocd.org/c/openocd/+/6940 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Ian Thompson <ianst@cadence.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2022-05-27tcl: Add support for Kontron SMARC-sAL28Sean Anderson1-0/+14
This commit is adapted from [1]. [1] https://review.openocd.org/c/openocd/+/4999 Signed-off-by: Michael Walle <michael.walle@kontron.com> Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com> [ adapted to use common configuration ] Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I9a428371694e7864e03055b8de18a55a7843b8c2 Reviewed-on: https://review.openocd.org/c/openocd/+/6977 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-27target: Add LS1028ASean Anderson1-0/+18
The LS1028A is similar to the LS1088A, except that it has 2 CPUs (and different ethernet capabilities). From a JTAG perspective, all that's different is the number of CPUs and the TAPID. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: Iba3a0ecfbf82cfcfeb7eea42d52121c3b9dc93a2 Reviewed-on: https://review.openocd.org/c/openocd/+/6976 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-27tcl/target/ls1088: Break out common configurationSean Anderson2-55/+65
Several Layerscape processors (LS1088A, LS2088A, LS2160A, and LS1028A) share a common architecture. Break out the common setup from the LS1088 config in preparation for adding the LS1028A. There's no official name for this series of processors, but NXP refers to them as "chassis generation 3" in U-Boot, so we'll go with that too. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: Ic6f89f95c678101f54579bcaa5d79c5b67ddf50a Reviewed-on: https://review.openocd.org/c/openocd/+/6975 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-21tcl/target/renesas_rz_five: Added RZ/Fivemicbis1-0/+22
Added support for the new Renesas RISC-V device: RZ/Five Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Change-Id: Id8ba29b83528c0bfe4f9b4ed21b0151a6e853bd7 Reviewed-on: https://review.openocd.org/c/openocd/+/6974 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2022-05-21tcl/target/renesas_rz_g2: Added RZ/G2LC and RZ/G2ULmicbis1-6/+22
Added support for two new devices: RZ/G2LC and RZ/G2UL Change-Id: Iec6ba88c1d279f50808b060343b45c796bbfdbfc Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6972 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-14tcl/interface/ftdi: Add config for Tigard boardThomas Hebb1-0/+19
Tigard[1] is an FT2232H-based development tool designed for ease of use with many different protocols and targets. It includes a JTAG header wired to channel B, with labeled pins for the four required signals as well as nTRST and nSRST, which are connected through an output buffer to BDBUS4 and BDBUS5 respectively. Add an interface config for Tigard. I wrote it by referencing the Tigard schematic and tested it by debugging a couple of RISC-V development boards. [1] https://github.com/tigard-tools/tigard Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Change-Id: I34df9f72538ba1e40ad53b568c9cdca96ae4b082 Reviewed-on: https://review.openocd.org/c/openocd/+/6952 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-14drivers/am335xgpio: Add AM335x driver for bitbang support on BeagleBonesSteve Marple2-0/+57
Change-Id: Iac1c9f3d380e2474c8b77407c89c2aad96fbf2ea Signed-off-by: Steve Marple <stevemarple@googlemail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6941 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-07bluenrg: add support for bluenrg-lps device and boardSalvatore Giorgio PECORINO2-2/+10
Added bluenrg-lps support Added file for the board steval-idb012v1 Fixed size_info information using a mask Changed the if condition in bluenrg-x.cfg to be valid only for bluenrg-1 and bluenrg-2 Signed-off-by: Salvatore Giorgio PECORINO <salvatore-giorgio.pecorino@st.com> Change-Id: Ic0777ec0811ee6fac7d5e1d065c4629e47d84a1f Reviewed-on: https://review.openocd.org/c/openocd/+/6928 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-04-24tcl/target/gd32vf103: add flash bankTomas Vanek1-1/+15
The flash is compatible with stm32f1x, reuse the driver. Extend the size of work area to RAM size of the smallest device. Stop watchdogs before flash programming. Change-Id: I67a7654a6e196f9d4b2409edaa7990c53334437e Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6711 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com>
2022-04-23tcl/target/stm32l4x: align format/order/comments with stm32f4xMarkus Reiter1-11/+14
Change-Id: Ie97bb2f56b582bc735c238af5f160fcb28a61eb0 Signed-off-by: Markus Reiter <me@reitermark.us> Reviewed-on: https://review.openocd.org/c/openocd/+/6933 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-04-23tcl/target/stm32l4x: switch to new TPIU/SWO supportMarkus Reiter1-7/+33
Change-Id: I3362fa7292eae7a3ba119cf6183f8bc4cbd5cbd4 Signed-off-by: Markus Reiter <me@reitermark.us> Reviewed-on: https://review.openocd.org/c/openocd/+/6932 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-04-23tcl/target/stm32l4x: set default WORKAREASIZE to smallest deviceMarkus Reiter1-2/+2
Change-Id: Ia8bfb664ff28bd0579492032ce513b010e71c593 Signed-off-by: Markus Reiter <me@reitermark.us> Reviewed-on: https://review.openocd.org/c/openocd/+/6931 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-04-23tcl/target/stm32f4x: fix nameMarkus Reiter1-1/+1
Change-Id: I9baa79d8cf402991e6638c255a91728b8a77020c Signed-off-by: Markus Reiter <me@reitermark.us> Reviewed-on: https://review.openocd.org/c/openocd/+/6930 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-04-03tcl/board: Add NXP FRDM-K64FMarc Schink1-0/+15
Change-Id: I4b8fbfb2948c4295c2a34d641dd59a73c512d9fa Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/6884 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-03-26tcl/tools: Add function to measure the speed of ARM Cortex-M devicesMarc Schink1-0/+50
Tested on an EFM32PG12 Starter Kit. Change-Id: I2cbc36fe0d2ad2089bf8c1e7d2260daaae4ddbb4 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/5353 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-19tcl/stm32u5x: fix clock config used at 'reset init'Tarek BOCHKATI1-9/+12
Change-Id: If004a04b93be47439809ea3fa336b14de7a12277 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6597 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2022-03-12Remove all occurrences of 'mem2array' and 'array2mem'Marc Schink16-109/+73
Replace deprecated commands 'mem2array' and 'array2mem' with new Tcl commands 'read_memory' and 'write_memory'. Change-Id: I116d995995396133ca782b14cce02bd1ab917a4e Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/6859 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12board: Add LS1046ARDBSean Anderson1-0/+17
This adds support for the LS1046A Reference Design Board. There are several JTAG headers accessable once the case is opened, but this config is for the externally-accessable CMSIS DAP. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I0f83470da3758f0c4512ce47348c4db7de17b27e Reviewed-on: https://review.openocd.org/c/openocd/+/6855 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12target: Add LS1046ASean Anderson1-0/+56
The LS1046A is a quad-core processor from NXP in the layerscape family. This SoC is a bit tricky to program: while the AArch64 CPUs are little-endian, most of the peripherals are big-endian. Care must be taken when interpreting memory reads/writes. This processor is in the same family as the ls1012a, so the setup is similar. If you use OpenOCD to attach early in the boot process, only the cpu0 may be available. Trying to halt other CPUs will fail. To avoid this, defer examination of cpus 1-3, and provide a core_up helper (like e.g. zynqmp). Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: If5a1a9441fb35fea3e05dc708b42e0cb3bbf2a54 Reviewed-on: https://review.openocd.org/c/openocd/+/6854 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl: don't use 'set' to retrieve the value of a variableAntonio Borneo4-4/+4
Original TLC syntax uses 'set varname' to retrieve the value of variable 'varname'. Such archaic syntax is still valid, but the shorter '$varname' makes the code easier to read. Replace 'set varname' with '$varname'. While there, remove some useless curly brackets. Change-Id: I27310e8c05afe56ea8bd0e41d4ae2c34447b725c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6863 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2022-03-12tcl/board: Add AM625 EVM basic supportNishanth Menon1-0/+25
Add basic connection details with am625 EVM/SK For further details, see https://www.ti.com/lit/zip/sprr448 Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: Ibd23203ea98e34d03d2f55dac3565aa15aad744b Reviewed-on: https://review.openocd.org/c/openocd/+/6799 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Add AM625 SoCNishanth Menon1-0/+25
Add support for the latest in TI k3 family AM625 SoC. For further details, see https://www.ti.com/lit/pdf/spruiv7 Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: Ia54d0eab1c30a973afb1c2c61f4c5a72d29d9b78 Reviewed-on: https://review.openocd.org/c/openocd/+/6798 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/board: Add J721s2 EVM basic supportNishanth Menon1-0/+25
Add basic connection details with J721s2 EVM. For further details, see https://www.ti.com/lit/zip/sprr439 Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I68f8818c492ea6e07c14f2da305671c26da801cb Reviewed-on: https://review.openocd.org/c/openocd/+/6797 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Add J721S2 SoCNishanth Menon1-0/+20
Add support for the latest in TI k3 family J721S2 SoC. For further details, see http://www.ti.com/lit/pdf/spruj28 Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I608ab4513ffb6b5c4166ba423e7d0dddbbb3bbfd Reviewed-on: https://review.openocd.org/c/openocd/+/6796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Add a gdb-attach event hook for armv8 and simplify startup ↵Nishanth Menon1-11/+28
function Since we can detect the type of target as well, reuse the _cpu_no_smp_up function name and use the target name to simplify the _up function and maintain consistency with what we introduced for r5. Lets introduce gdb-attach event in a much cleaner fashion. NOTE: we add a halt 1000 to retain the default gdb-attach hook behavior While at it, fix a minor type of s/are/as in "Set Default target are core 0" and simplify the foreach usage. Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I3259b7c3ae4c71b06d921edfaefe17c03bb673dc Reviewed-on: https://review.openocd.org/c/openocd/+/6616 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Add a gdb-attach event hook for r5 and simplify startup ↵Nishanth Menon1-34/+16
function Since we can detect the type of target as well, make the attach function name generic for the follow on cleanup patch on armv8 to use as well. Lets introduce gdb-attach event in a much cleaner fashion. We can introduce a simpler r5_up function since we now have more descriptive core names making the individual descriptive procs redundant. NOTE: we add a halt 1000 to retain the default gdb-attach hook behavior Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I31506bb2b86e63638082640eb72aa7c4c9575e93 Reviewed-on: https://review.openocd.org/c/openocd/+/6617 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Rename R5 targets to be more descriptiveNishanth Menon1-23/+12
R5 targets are currently named r5.0..n and the only way for user to determine the actual type is external documentation. Lets just rename the target names to make them descriptive to not require external documentation for finding which R5 to connect to. NOTE: we leave the _mcu_r5_cores _main0_r5_cores _main1_r5_cores alone for now to allow existing startup proc functions to work, but we will drop it in the follow on patch. Previously: Info : starting gdb server for j721e.cpu.r5.0 on 3336 Info : Listening on port 3336 for gdb connections Info : starting gdb server for j721e.cpu.r5.1 on 3337 Info : Listening on port 3337 for gdb connections Info : starting gdb server for j721e.cpu.r5.2 on 3338 Info : Listening on port 3338 for gdb connections Info : starting gdb server for j721e.cpu.r5.3 on 3339 Info : Listening on port 3339 for gdb connections Info : starting gdb server for j721e.cpu.r5.4 on 3340 Info : Listening on port 3340 for gdb connections Info : starting gdb server for j721e.cpu.r5.5 on 3341 Info : Listening on port 3341 for gdb connections With this patch: Info : starting gdb server for j721e.cpu.mcu_r5.0 on 3336 Info : Listening on port 3336 for gdb connections Info : starting gdb server for j721e.cpu.mcu_r5.1 on 3337 Info : Listening on port 3337 for gdb connections Info : starting gdb server for j721e.cpu.main0_r5.0 on 3338 Info : Listening on port 3338 for gdb connections Info : starting gdb server for j721e.cpu.main0_r5.1 on 3339 Info : Listening on port 3339 for gdb connections Info : starting gdb server for j721e.cpu.main1_r5.0 on 3340 Info : Listening on port 3340 for gdb connections Info : starting gdb server for j721e.cpu.main1_r5.1 on 3341 Info : Listening on port 3341 for gdb connections Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I2989efe3ae3e16754f98fa1dc9363ec4c898f7c3 Reviewed-on: https://review.openocd.org/c/openocd/+/6627 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Rename m4 target as general purpose mcuNishanth Menon1-17/+17
The MCU is present on few of the SoCs and is meant as General Purpose (GP) MCU of the system. Lets rename it to make clear what we are debugging - esp when multiple MCUs are present in the system. Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I16132d321daf6e9b1d893fe6f92026d5aa9eb152 Reviewed-on: https://review.openocd.org/c/openocd/+/6619 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Rename m3 target as sysctrlNishanth Menon1-16/+16
The M3 is the system controller of the system. Lets rename it to make clear what we are debugging - esp when multiple MCUs are present in the system. Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I4cd03b6068b8ce140fd254f9dd88151c4c7006d7 Reviewed-on: https://review.openocd.org/c/openocd/+/6618 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Add a gdb-attach event hook for m3 and m4Nishanth Menon1-0/+12
Add gdb-attach event to call the "up" function of m3 and m4 allowing for more seamless integration with gdb for end users. We still retain _up functions for non-gdb functionality. NOTE: we add a halt 1000 to retain the default gdb-attach hook behavior Suggested-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I2e51fdbd8756f156551e589c748c3a338afa655c Reviewed-on: https://review.openocd.org/c/openocd/+/6615 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/target/ti_k3: Remove args from m3 and m4_upNishanth Menon1-2/+2
args serve no purpose, so drop them. Signed-off-by: Nishanth Menon <nm@ti.com> Change-Id: I136394307016453d576cf524b0f02227ba26ef8a Reviewed-on: https://review.openocd.org/c/openocd/+/6626 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12tcl/stm32l5x|u5x: refactor common tcl codeTarek BOCHKATI3-315/+164
both stm32l5x and stm32u5x configs are almost identical except clock config. while at there rename target procs to avoid issues with JTAG daisy chaining. Change-Id: Ibbb1dfeb91a7f8d5d45744cf57dca2877f60e0c5 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6596 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2022-02-26board: Add NXP LS1088ARDBSean Anderson1-0/+14
This adds a board file for the NXP LS1088ARDB. This only covers the "primary" JTAG header J55, and not the PCIe header (J91). The only oddity is that the LS1088A and CPLD are muxed by adding/removing a jumper from J48. Unfortunately, it doesn't look like OpenOCD supports this CPLD beyond determining the irlen, so it's not very useful. Those who are interested in experimenting can define CWTAP to access the CPLD, but the default is to access the CPU. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: Ia07436a534f86bd907aa5fe2a78a326a27855a24 Reviewed-on: https://review.openocd.org/c/openocd/+/6849 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-26target: ls1088a: Add service processorSean Anderson1-0/+32
Normally the service processor is not necessary for debugging. However, if you are using the hard-coded RCW or your boot source is otherwise corrupt, then the general purpose processors will never be released from hold-off. This will cause GDB to become confused if it tries to attach, since they will appear to be running arm32 processors. To deal with this, we can release the CPUs manually with the BRRL register. This register cannot be written to from the axi target, so we need to do it from the service processor target. This involves halting the service processor, modifying the register, and then resuming it again. We try and determine what state the service processor was in to avoid resuming it if it was already halted. The reset vector for the general purpose processors is determined by the boot logation pointer registers in the device configuration unit. Normally these are set using pre-boot initialization commands, but if they are not set then they default to 0. This will cause the CPU to almost immediately hit an illegal instruction. This is fine because we will almost certainly want to attach to the processor and load a program anyway. I considered adding this as an event handler for either gdb-attach or reset-init. However, this command shouldn't be necessary most of the time, and so I don't think we should run it automatically. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I1b725292d8a11274d03af5313dc83678e10e944c Reviewed-on: https://review.openocd.org/c/openocd/+/6850 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-26target: Add support for ls1088aSean Anderson1-0/+42
The LS1088A is an octo-core aarch64 processor from NXP in the layerscape family. The JTAG is undocumented, but I was able to figure things out from the output of `dap info`. This is the first in-tree example of using the hwthread rtos (as far as I know), so hopefully it can serve as an example to other developers. There are some ETMs, but I was unable to try them out because I got 'invalid command name "etm"' when trying to test things out. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I9b0791d27d8c41170a413a8d86431107a85feba2 Reviewed-on: https://review.openocd.org/c/openocd/+/6848 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-26cpld: altera-epm240: Increase adapter speedSean Anderson1-0/+4
According to the datasheet, the minimum clock period with Vccio1 = 1.5V (the lowest voltage supported) is 143ns, or around 6MHz. Set the default adapter speed to 5 MHz. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I21cad33fa7f1e25e81f43b5d2214d1fa4ec924de Reviewed-on: https://review.openocd.org/c/openocd/+/6847 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-26cpld: altera-epm240: Add additional IDCODEsSean Anderson1-1/+14
This adds some additional IDCODEs from the datasheet. It also adds support for customizing the tap name. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Change-Id: I7cda10b92c229b61836c12cd9ca410de358ede2e Reviewed-on: https://review.openocd.org/c/openocd/+/6846 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-14Cadence virtual debug interface (vdebug) integrationJacek Wuwer8-0/+225
Change-Id: I1bc105b3addc3f34161c2356c482ff3011e3f2cc Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6097 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: zapb <dev@zapb.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-01-29tcl/board: Add EVB-LAN9255 configHans-Erik Floryd1-0/+11
Config for EVB-LAN9255, tested using Atmel-ICE debugger on J10 connector. Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com> Change-Id: I8bcf779e9363499a98aa0b7d10819c53da6a19e7 Reviewed-on: https://review.openocd.org/c/openocd/+/6812 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-01-05flash/nor/efr32: fixed lockbits and user dataDoug Brunner1-0/+2
Changed flash driver to support writing to the user data page, as well as to any portion of the lockbits page above 512 bytes (the amount used for the actual page lock words). The top part of the lockbits page is used on at least the EFR32xG1 chips for the SiLabs bootloader encryption keys. As presented to the user, the lockbits page is the same size as the other pages, but any attempt to write to its low 512 bytes is an error. To enforce this, efr32x_write is renamed to efm32x_priv_write and a wrapper function is provided in its place. If the user erases the lockbits page, the driver rewrites the cached lock words after the erase. When the driver erases the lockbits page in order to update the lock words, it first takes a copy of anything stored in the top part of the page, and re-programs it after the erase operation. There are now multiple instances of flash_bank for each target, and the flash_bank instances must share their cached lock words to operate as intended. Therefore, when a bank is created, the global flash bank list is used to find any other banks that share the same target. Since some banks in the global list are invalid at the time free_driver_priv is called, reference counting is used to decide when to free driver_priv. To avoid the need to find the lockbits flash_bank from another flash_bank, efm32x_priv_write and efm32x_erase_page now take an absolute address. There didn't seem to be any reason to prohibit unprotecting individual flash pages, so that limitation is removed from efm32x_protect(). This addresses ticket #185. Valgrind-clean, except for 2x 4kiB not freed/still reachable blocks that were allocated by libudev. No new Clang analyzer warnings, no new sanitizer warnings. Signed-off-by: Doug Brunner <doug.a.brunner@gmail.com> Change-Id: Ifb22e6149939d893f386706e99b928691ec1d41b Reviewed-on: https://review.openocd.org/c/openocd/+/6665 Tested-by: jenkins Reviewed-by: Fredrik Hederstierna <fredrik.hederstierna@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-11Add Microchip SAME51 Curiosity Nano boardJoerg Wunsch1-0/+14
This board is (software wise) similar to the existing SAME54 Xplained Pro board, with just a slightly different MCU. (Hardware wise, it features a vastly different form factor.) Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Change-Id: I5e5435d49d333fb74471994ee84de59ed983153c Reviewed-on: https://review.openocd.org/c/openocd/+/6747 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Axel W. Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-03tcl: stm32mp13x: add target and board config filesAntonio Borneo2-0/+110
The stm32mp13x has one core Cortex-A7. The board Discovery Kit includes an on-board STLink-V3 with SWD connection. The webpage of the board is not active yet. Change-Id: I8836b26612a160ead79766955ebefaf3d21a329c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6675 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-11-28jtag/hla, jtag/stlink: switch to command 'adapter serial'Antonio Borneo3-3/+3
The driver hla defines the command 'hla_serial' to specify the serial string of the adapter. The driver st-link defines the command 'st-link serial' to specify the serial string of the adapter. Remove and deprecate the driver commands and use 'adapter serial'. Change-Id: I9505c398a77125b1ebf4ba71da7baf4d663b75be Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6657 Tested-by: jenkins
2021-11-28jtag/jlink: switch to command 'adapter serial'Antonio Borneo1-1/+1
The driver jlink defines the command 'jlink serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Note: in former code the commands 'jlink serial' and 'jlink usb' were mutually exclusive; running one of them would invalidate the effect of a previous execution of the other. The new code gives priority to 'adapter serial', even if executed before 'jlink usb'. Change-Id: I920b0c136716f459b6fd6f7da8a01a7fa1ed389f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6656 Reviewed-by: zapb <dev@zapb.de> Tested-by: jenkins
2021-11-28jtag/xds110: switch to command 'adapter serial'Antonio Borneo1-1/+1
The driver xds110 defines the command 'xds110 serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Note: the original command 'xds110 serial' used a complex and undocumented conversion of the serial number through multibyte string, wide-character string and C cast. The XDS110 I can access and the lsusb dumps available through Google don't show any exotic USB serial that require such conversion. The original developer doesn't remember any constraint that mandates such conversion (see comments in https://review.openocd.org/4322/). The conversion is removed by this patch. Change-Id: I38909918079b2c1797ad85ebec2fea1b33743606 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6655 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2021-11-28jtag/kitprog: switch to command 'adapter serial'Antonio Borneo1-1/+1
The driver kitprog defines the command 'kitprog_serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: I844cb815af01137392b6d12e1b5972fc77ac092d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6652 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2021-11-28jtag/ftdi: switch to command 'adapter serial'Antonio Borneo1-1/+1
The driver ftdi defines the command 'ftdi serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: Ia5b1f325b9fab8f58b5ea70f8b807e50b148b939 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6651 Tested-by: jenkins
2021-11-28jtag/cmsis_dap: switch to command 'adapter serial'Antonio Borneo1-1/+1
The driver cmsis_dap defines the command 'cmsis_dap_serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: I88e2d4de360a6c6f23529bb18494962a267250df Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6649 Tested-by: jenkins
2021-11-28jtag/aice: switch to command 'adapter serial'Antonio Borneo1-1/+1
The driver aice defines the command 'aice serial' to specify the serial string of the adapter, but actually does not use this value in the code. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: I892e0a4e1b41a7a87adf54a5736abf7419f32979 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6648 Tested-by: jenkins
generated by cgit v1.1 at 2024-10-06 02:39:54 +0000