aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)AuthorFilesLines
2021-06-26tcl/board: Add Renesas Falcon boardMarek Vasut1-0/+10
Add board configuration for Renesas Falcon board based on the R8A779A0 V3U SoC. Change-Id: If8369f2e2b97dfea9ccbee2c9b916ef7094f9b92 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/6315 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-26tcl/target: Add support for Renesas R8A779A0 V3U SoCMarek Vasut1-16/+41
The V3U SoC is unique in that it now has 8x CA76 and CR52, while the previous SoCs had CA57/CA53/CR7 . This can still be handled without too complex modifications to the gen3 configuration file, so add the logic to handle it there. Change-Id: I7ab33eacc1fd379d369988d3d6690d2e82346c7e Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/6314 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-26tcl/target: Select default boot core on Renesas R-Car Gen2/Gen3Marek Vasut2-0/+6
On SMP Renesas R-Car Gen2/Gen3 systems, select the boot core as the default target using the 'targets' command. This way, the user can start debugging code running on the boot core without having to switch to the boot core by explicitly invoking 'targets' command first, since it is likely the debugged code will run on the boot core. Note that most of the code is already in place, it was just not used, so this is more of a fix to make the original intention work. Change-Id: I727808adce617c1d9ebd6ffa34f60f5882cdae60 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/6313 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23tcl: Add support for the Digilent Nexys Video boardRohit Singh1-0/+26
* https://store.digilentinc.com/nexys-video-artix-7-fpga-trainer-board-for-multimedia-applications/ * https://reference.digilentinc.com/_media/nexys-video:nexys_video_sch.pdf The Nexys Video board has FTDI FT2232 whose channel B is connected to Artix-7 FPGA's JTAG pins, and can be supported by OpenOCD's ftdi interface. Tested to be working fine on real hardware. Change-Id: I2996166dc8c2b6c08a9390958adfcdec8fc2bd37 Signed-off-by: Rohit Singh <rohit91.2008@gmail.com> Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/4364 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-04target/renesas_rz_g2: Introduce tcl config file for RZ/G2 devicesmicbis1-0/+185
Initial support for Renesas RZ/G2 MPU family Change-Id: I5ca74cddfd0c105a5307de56c3ade7084f9c28d2 Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: http://openocd.zylin.com/6250 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-04tcl/target/stm32f4x: fix hardcoded chip nameTarek BOCHKATI1-1/+1
Fixes: c945d6e61605 ("tcl/target: start using the new TPIU/SWO support") Change-Id: I4543c9a204f7b4b3b14e6eabc5042653106aff0e Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6277 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-05-29tcl/board: Add ST NUCLEO-8S208RBMarc Schink1-0/+16
Change-Id: I384c6ad9b4cbabbc004160677f600d8c4bd3eb71 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6268 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-05-29tcl: remove remaining deprecated commandsAntonio Borneo7-7/+7
There are still few adapter_khz, ftdi_location, jtag_nsrst_delay and xds110_serial strolling around ... Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6270 Tested-by: jenkins
2021-05-22target/zynqmp : Add AXI AP access portOlivier DANET1-0/+2
The Xilinx Zynq UltraScale+ SoC have an "AXI-AP" access port for direct memory accesses without halting CPUs. Change-Id: I6303331c217795657575de4759444938e775dee1 Signed-off-by: Olivier DANET <odanet@caramail.com> Reviewed-on: http://openocd.zylin.com/6263 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-05-22tcl: fix some minor typoAntonio Borneo13-18/+18
Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. While there, fix one indentation. Change-Id: I72369ed26f363bacd760b40b8c83dd95e89d28a4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6214 Tested-by: jenkins
2021-05-22tcl/rp2040: remove empty line at end of fileAntonio Borneo2-2/+0
Change-Id: I212a96b77282b151a8ecbd46a6436e2bbbda4161 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6221 Tested-by: jenkins
2021-05-08tcl: [3/3] prepare for jimtcl 0.81 'expr' syntax changeAntonio Borneo33-109/+109
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Fix manually the remaining lines that don't match simple patterns and would require dedicated boring scripting. Remove the 'expr' command where appropriate. Change-Id: Ia75210c8447f88d38515addab4a836af9103096d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6161 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-05-08tcl: [2/3] prepare for jimtcl 0.81 'expr' syntax changeAntonio Borneo4-12/+12
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Enclose within double quote the argument of 'expr' when there is the need to concatenate strings. Change-Id: Ic0ea990ed37337a7e6c3a99670583685b570b8b1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6160 Tested-by: jenkins
2021-05-08tcl: [1/3] prepare for jimtcl 0.81 'expr' syntax changeAntonio Borneo61-1596/+1596
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. In the TCL scripts distributed with OpenOCD there are 1700+ lines that should be modified before switching to jimtcl 0.81. Apply the script below on every script in tcl folder. It fixes more than 92% of the lines %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- #!/usr/bin/perl -Wpi my $re_sym = qr{[a-z_][a-z0-9_]*}i; my $re_var = qr{(?:\$|\$::)$re_sym}; my $re_const = qr{0x[0-9a-f]+|[0-9]+|[0-9]*\.[0-9]*}i; my $re_item = qr{(?:~\s*)?(?:$re_var|$re_const)}; my $re_op = qr{<<|>>|[+\-*/&|]}; my $re_expr = qr{( (?:\(\s*(?:$re_item|(?-1))\s*\)|$re_item) \s*$re_op\s* (?:$re_item|(?-1)|\(\s*(?:$re_item|(?-1))\s*\)) )}x; # [expr [dict get $regsC100 SYM] + HEXNUM] s/\[expr (\[dict get $re_var $re_sym\s*\] \+ *$re_const)\]/\[expr \{$1\}\]/; # [ expr (EXPR) ] # [ expr EXPR ] # note: $re_expr captures '$3' s/\[(\s*expr\s*)\((\s*$re_expr\s*)\)(\s*)\]/\[$1\{$2\}$4\]/; s/\[(\s*expr\s*)($re_expr)(\s*)\]/\[$1\{$2\}$4\]/; %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I0d6bddc6abf6dd29062f2b4e72b5a2b5080293b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6159 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-05-02tcl/board: add pico-debug supportPeter Lawrence2-0/+49
pico-debug is not a board; it is a virtual CMSIS-DAP adapter that runs on the same RP2040 also being debugged. This is possible due to pico-debug running on the normally-dormant second Cortex-M0+ core (Core1), providing debugging of the first core (Core0). As such, it could be used on a variety of RP2040-based boards. Since a flash driver is useful (if not essential), a flash driver is included. This driver code originated on RPi's bespoke OpenOCD fork; lipstick was added to this particular pig to make it more presentable on OpenOCD proper. no new Clang analyzer warnings Change-Id: I31f98b5ea1664f0adfbc184b57efba963acfb958 Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/6075 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-04-25tcl/at91/sam9_smc: fix syntax errorsAntonio Borneo1-16/+16
This file has been added to OpenOCD 0.5.0 in 2011, before gerrit gets in use, with commit ba71e8c521a7 ("at91: add chip register definition and generic init support"). The only procedure in the file has never been referenced in any other part of OpenOCD. This procedure has syntax errors while uses its argument 'cs' and several unmatched parenthesis, which clearly highlights that it has never been used so far. Gerrit does not report any patch aimed at fixing it. Even if the file seems unused and could be removed, let's fix it in the hope it could get used. While there, remove some useless parenthesis and format it using the new simplified syntax required by jimtcl 0.81. Change-Id: Ied26456262e7b99de37667a8ce418f4f12e237bd Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: ba71e8c521a7 ("at91: add chip register definition and generic init support") Reviewed-on: http://openocd.zylin.com/6157 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-04-25board: imx53: fix l2 cache initializationAntonio Borneo3-3/+3
Both http://openocd.zylin.com/542/ and http://openocd.zylin.com/543/ introduce the same typo in the bitfield for initializing the l2 cache of imx53. One year later, http://openocd.zylin.com/1461/ copy-pastes the same typo. The comment above the code show that it's really an error and not the expected behaviour. Fix the typo replacing the incorrect comparison '<' with a left shift. Change-Id: I43725731a2228e28a676215f76936fa289d9395e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: e3b327343394 ("cfg: add imx53loco board config") Fixes: 108a458ab888 ("cfg: add icnova_imx53_sodimm board config") Fixes: e608ced33001 ("ftdi/board: Add support for DENX M53EVK") Reviewed-on: http://openocd.zylin.com/6156 Tested-by: jenkins Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-04-24target/imx8qm: Initial supportLeonard Crestez1-0/+89
Chip is similar to imx8x series but has different cores at different addresses. Support for reduced versions is not yet available. Tested on imx8qm-mek board Change-Id: Ia34a80d561ab2849a570d8c375b936a45cbf45ca Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-on: http://openocd.zylin.com/5042 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-04-05udev rules: add missing Altera USB Blaster devicesAntonio Borneo1-1/+1
All Altera USB Blaster devices require a dedicated line in the udev rules, but some USB VID/PID present in interface and board config file is missing in udev rules. Add the missing Altera USB Blaster devices in udev rules. While there, fix an incorrect pair VID/PID that are reported swapped inside a comment. Change-Id: I2d67e90b10db99ef2638405585859c1393456f65 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6102 Tested-by: jenkins
2021-03-24stm32l4x: add OTP support for STM32 G0/G4/L4/L4+/L5/WB/WL devicesTarek BOCHKATI6-11/+12
this is a rework of #5320 started by Andreas then abandoned. same syntax as in stm32f2x driver: enable OTP for writing > stm32l4x otp 1 enable write to OTP > flash write_bank 1 foo.bin 0 > flash filld 0x1FFF7000 0xDeadBeafBaadF00d 1 read OTP > mdw 0x1FFF7000 4 disable OTP > stm32l4x otp 1 disable Change-Id: Id7d7c163b35d7a3f406dc200d7e2fc293b0675c2 Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5537 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-20tcl/interface/ftdi: Add PLS SPC5 debugger configAndrew Wesie1-0/+36
Change-Id: I694201db0811beebc94e87822c87fbfc6aecc4c4 Signed-off-by: Andrew Wesie <awesie@gmail.com> Reviewed-on: http://openocd.zylin.com/6081 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-19tcl/interface/ftdi: Add miniWiggler debugger configAndrew Wesie1-0/+34
Change-Id: I91f73a377cd9525008d09fda7a7c58d498014b74 Signed-off-by: Andrew Wesie <awesie@gmail.com> Reviewed-on: http://openocd.zylin.com/6111 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-19zy1000: drop the code, deprecated in v0.10.0Antonio Borneo1-117/+0
The code for zy1000 has been marked as deprecated in release v0.10.0, 4 years ago. Time to drop it! Change-Id: I08fca2a2bf8f616f031e15fd37dac3197a40ba50 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6090 Tested-by: jenkins
2021-03-10tcl/target: add BCM2711 configuration fileTarek BOCHKATI1-0/+62
The Broadcom BCM2711 used in Raspberry Pi 4 No documentation was found on Broadcom website Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/ Change-Id: I3db6c9af520af8ab4c21ad35ff0f2db28efc0325 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6066 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: add BCM2837 configuration fileTarek BOCHKATI1-0/+64
This is the Broadcom chip used in the Raspberry Pi 3, and in later models of the Raspberry Pi 2. Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837 https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837b0 Change-Id: I1188a7866304c59f670a543809aca3927174786e Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6069 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: add BCM2836 configuration fileTarek BOCHKATI1-0/+59
The Broadcom chip used in the Raspberry Pi 2 Model B Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836 Change-Id: I50b040db213c5b72f63d5f5534c552426c7376f9 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6068 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: add BCM2835 configuration fileTarek BOCHKATI1-0/+24
This is the Broadcom chip used in the Raspberry Pi Model A, B, B+, the Compute Module, and the Raspberry Pi Zero. Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2835 Change-Id: Ifeb012952473d624327e8c010ac5c886d9473aa0 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6067 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10Add configuration file for Olimex H405Felipe Balbi1-0/+8
Change-Id: I34a030f65ebe041408655ea9792346b146bd1092 Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-on: http://openocd.zylin.com/6049 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: start using the new TPIU/SWO supportAntonio Borneo3-12/+54
Create the TPIU and SWO device in target config file. Replace the target event 'trace-config' with the TPIU/SWO event 'post-enable'. Extend the existing code in the event handler to properly set the gpio mode and speed to permit synchronous trace. This patch is not exhaustive of all the targets that have SWO, but has to be considered as an initial example. Change-Id: If4bbf364c0d2aef3ae49951e76507a3b1cfd58e7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5859 Tested-by: jenkins Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
2021-03-10tcl/target: add Rockchip RK3399 targetJiri Kastner1-0/+79
Change-Id: I28f404b1e53fc9dbb04b3f939294ae248bbde183 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/5994 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10eMAG: Add Ampere eMAG config filesAnthony Ferranti2-0/+150
Add board and target configuration files for Ampere eMAG8180 board and Ampere eMAG processor. Tested on an Ampere eMAG8180 development platform. Change-Id: I222653f0fc12d25202a7e469db3594076cbc38ed Signed-off-by: Anthony Ferranti <ferranti@os.amperecomputing.com> Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com> Reviewed-on: http://openocd.zylin.com/5569 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/board: Add AM642 EVM basic supportNishanth Menon1-0/+24
Add basic connection details with AM642 EVM Change-Id: I95dcf6afadb61bfd8456b79274eae863b834167d Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5952 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Vignesh Raghavendra Tested-by: jenkins
2021-03-10tcl/board: Add J7200 EVM basic supportNishanth Menon1-0/+24
Add basic connection details with J7200 EVM Change-Id: Ia8fa5033a693ac09849d33693c81b8cb206f17c1 Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5951 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-10tcl/board: Add J721E EVM basic supportNishanth Menon1-0/+24
Add basic connection details with J721E EVM Change-Id: I0c2d25252432914d8e371e81761a59c05924bd8e Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5185 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-10tcl/board: Add AM654 EVM basic supportNishanth Menon1-0/+24
Add basic connection details with AM654 evm Change-Id: Iea2240860e50ae42cf6f1617a10e24f63c6dd988 Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5183 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-10tcl/target: Add K3 basic supportNishanth Menon1-0/+256
Add basic connection details for AM654 and J721E SoCs from TI. See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: https://www.ti.com/lit/pdf/spruid7 See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: https://www.ti.com/lit/pdf/spruil1 See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 See AM64X Technical Reference Manual (SPRUIM2, Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2 Change-Id: Ie5108c6ad6f1304a6bf5b9f81aa9ebd33b8a559d Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5182 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-04tcl/target/eos_s3: fix variable's expansion typoAntonio Borneo1-1/+1
TCL expands the variables only if preceded by a dollar sign. Add the missing dollar before the variable's name '_CPUTAPID'. Change-Id: Icc5d0dddf24f75d12ee63fee69e1b265e842ca43 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reported-by: Wes Cilldhaire <wes@sol1.com.au> Fixes: c3166b43e415 ("tcl/target: Add QuickLogic EOS S3 MCU configuration") Reviewed-on: http://openocd.zylin.com/6079 Tested-by: jenkins Reviewed-by: TM <tommy_murphy@hotmail.com>
2021-01-28steppenprobe: fix file permissionAntonio Borneo1-0/+0
Commit 895d4a599585 ("tcl/interface/ftdi: Add Steppenprobe open hardware interface") erroneously set the execution permission to the configuration file. Strip the execution permission. Change-Id: I556451d5e6fee4aee385451e8c90216a25b6ef46 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: http://openocd.zylin.com/5653 Reviewed-on: http://openocd.zylin.com/6038 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Paul Fertser <fercerpav@gmail.com>
2020-12-26tcl/target/rk3308.cfg: add defer-examineJiri Kastner1-1/+2
only core0 is brought up by bootloader Change-Id: I1d6b5e6ba7498beadbf3805f4271f0197e411bd5 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/5980 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
2020-11-15tcl/target: remove deprecated ${target}_${adapter}.cfg filesTarek BOCHKATI12-23/+0
Change-Id: Ic4837ad3bd06eb353020e44638306f341a923c05 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com> Reviewed-on: http://openocd.zylin.com/5929 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-11-15flash/stm32l4x: STM32L55/L56xx basic support (non-secure mode)Tarek BOCHKATI2-0/+143
STM32L5 have 512 Kbytes of Flash memory with dual bank architecture. STM32L5 flash is quite similar to L4 flash, mainly register names and offsets and some bits are changed. NON-SECURE flash is located at 0x8000000 like L4 devices, so no big change is needed (secure flash will be subject of another change). Note: flash driver name is set stm32l5x, in order to extend the commands with specific L5 commands (to manage TZEN for example ...) Note: this works only when TZEN=0 Change-Id: Ie758abb4aa19a3f29eeb0702d7dcb43992e4c639 Signed-off-by: Michael Jung <mijung@gmx.net> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5510 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-11-15tcl/board: rename board file ST b-l475e-iot01aAntonio Borneo1-0/+2
Use the board file name as <company>_<name>.cfg Add the SPDX tag to workaround an error in checkpatch that fails to recognize as valid a patch that only changes a file name. Change-Id: I929cd9e5f9fe2e7386950643487534c9a5a05bc6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: e44539d66c89 ("Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interface") Reviewed-on: http://openocd.zylin.com/5931 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins
2020-11-08Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interfaceAndreas Bolsch21-1/+1461
- write speed up to 150 kByte/s on STM32F469I-disco (due to SWD clock and USB connection), up to 1 MByte/s on Nucleo-F767ZI with external STLink-V3 or Nucleo-G474RE with two W25Q256FV in dual 4-line mode or STM32H73BI-Disco in octal mode - tested with STM32L476G-disco (64MBit flash, 3-byte addr), STM32F412G-Disco, STM32F469I-Disco, STM32F746G-Disco, and STM32L476G-Disco (all 128Mbit flash, 3-byte addr), STM32F723E-Disco, STM32F769I-Disco (512Mbit flash, 4-byte addr) STM32L4R9I-Disco, STM32L4P5G-Disco (512MBit octo-flash, DTR, 4-byte addr) STM32H745I-Disco, STM32H747I-Disco (two 512MBit flash, 4-byte addr) STM32H73BI-Disco, STM32H735G-Disco (512MBit octo-flash, DTR, 4-byte addr) - suitable cfg for Discovery boards included - limited parsing of SFDP data if flash device not hardcoded (tested only in single/quad mode as most devices either don't support SFDP at all or have empty(!) SFDP memory) - 'set' command for auto detection override (e. g. for EEPROMs) - 'cmd' command for arbitrary SPI commands (reconfiguration, testing etc.) - makefile for creation of binary loader files - tcl/board/stm32f469discovery.cfg superseded by stm32f469i-disco.cfg - tcl/board/stm32f7discovery.cfg removed as name is ambiguous (superseded by stm32f746g-disco.cfg vs. stm32f769i-disco.cfg) - dual 4-line mode tested on Nucleo-F767ZI, Nucleo-H743ZI and Nucleo-H7A3ZI-Q with two W25Q256FV, and on Nucleo-L496ZP-P and Nucleo-L4R5ZI with two W25Q128FV, sample cfg files included and on STM32H745I-Disco, STM32H747I-Disco, STM32H750B-Disco - read/verify/erase_check uses indirect read mode to work around silicon bug in H7, L4+ and MP1 memory mapped mode (last bytes not readable, accessing last bytes causes debug interface to hang) - octospi supported only in single/dual 1-line, 2-line, 4-line and single 8-line modes, (not in hyper flash mode) Requirements: GPIOs must be initialized appropriately, and SPI flash chip be configured appropriately (1-line ..., QPI, 4-byte addresses ...). This is board/chip specific, cf. included cfg files. The driver infers most parameters from current setting in CR, CCR, ... registers. Change-Id: I54858fbbe8758c3a5fe58812e93f5f39514704f8 Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/4321 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com>
2020-11-07stm32h7x: Fix reset with non-HLA interfaces on macOSAlberto García Hierro1-10/+15
regsub doesn't work correctly on macOS Catalina, which results in an incorrect CHIPNAME derived from the current target. Since regsub is only used by this target, replace it with a simple string search for '.' followed by a substring. This is funcionally equivalent to what the regular expression was doing, but instead relies in simpler string operations that should have little to no differences between systems. Also, refactor CHIPNAME detection into proc stm32h7x_chipname, so it's always retrieved in the same way without duplicating the code. Change-Id: Ia9f63f56b508688e74278b022eaec47e503916e7 Signed-off-by: Alberto Garcia Hierro <alberto@garciahierro.com> Reviewed-on: http://openocd.zylin.com/5872 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-11-07tcl/interface/ftdi: Add HIE JTAG Debugger configJonathan McDowell1-0/+20
Change-Id: Ibb7a2bb8807c442394982e89258874557a2baaad Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-on: http://openocd.zylin.com/5910 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-11-04tcl: replace '-ctibase' with '-baseaddr'Antonio Borneo11-17/+17
Replace the deprecated option '-ctibase' with the generic option '-baseaddr'. Change generated with command: sed -i 's/-ctibase/-baseaddr/g' $(find tcl/ -type f) Change-Id: If776934d2ac106532708768bb3a4ec6fcffb0368 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5870 Tested-by: jenkins
2020-11-04stm32h7x.cfg: alignment with RM0399 rev3Tarek BOCHKATI1-2/+4
in RM0399 rev2, there was these bits in DBGMCU_CR registers: - DBGSTBY_D3 : bit 7 - DBGSTOP_D3 : bit 8 these bits have been changed to reserved in rev3 Change-Id: I9d10d90e383795dc8e25a117d59fa065dc594610 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5861 Tested-by: jenkins Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-30tcl/board: fix changed target config filenamesAntonio Borneo2-2/+2
In commit a1ce28b118e7 ("rename some target scripts to be consistent with the rest") the following renames was applied, but the old names are still referenced: tcl/target/{sam7se512.cfg => at91sam7se512.cfg} tcl/target/{sam7x256.cfg => at91sam7x256.cfg} Fix the board files to use to correct target config filename. Change-Id: I7698aa0da7db95c2bd9ba7ab8c260905a975c857 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5888 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2020-10-30tcl/board: drop 'tcl' prefix in 'find' commandAntonio Borneo2-2/+2
When OpenOCD is installed to the host the 'tcl' folder gets usually installed in /usr/share/openocd/, thus having 'tcl' as prefix of the target's file causes 'find' to fail. Remove the 'tcl' folder prefix. Change-Id: I3dc484c8de6af8f5aae4dd1b230522ee47ae2ba6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5887 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2020-10-30tcl/interface/ti-icdi: remove empty lines at end of fileAntonio Borneo1-1/+0
Change-Id: I031dc52c20b8f213b12df13c9c974d9ac3ef2164 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5603 Tested-by: jenkins
generated by cgit v1.1 at 2024-10-05 21:23:36 +0000