aboutsummaryrefslogtreecommitdiff
path: root/tcl/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-06-24tcl: add SPDX tagAntonio Borneo2-0/+4
For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ief3da306a6e1978de7dfb8f552f9ff23151f9944 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7030 Tested-by: jenkins
2022-03-26tcl/tools: Add function to measure the speed of ARM Cortex-M devicesMarc Schink1-0/+50
Tested on an EFM32PG12 Starter Kit. Change-Id: I2cbc36fe0d2ad2089bf8c1e7d2260daaae4ddbb4 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/5353 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-05-08tcl: [3/3] prepare for jimtcl 0.81 'expr' syntax changeAntonio Borneo1-2/+2
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Fix manually the remaining lines that don't match simple patterns and would require dedicated boring scripting. Remove the 'expr' command where appropriate. Change-Id: Ia75210c8447f88d38515addab4a836af9103096d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6161 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-05-08tcl: [1/3] prepare for jimtcl 0.81 'expr' syntax changeAntonio Borneo1-15/+15
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. In the TCL scripts distributed with OpenOCD there are 1700+ lines that should be modified before switching to jimtcl 0.81. Apply the script below on every script in tcl folder. It fixes more than 92% of the lines %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- #!/usr/bin/perl -Wpi my $re_sym = qr{[a-z_][a-z0-9_]*}i; my $re_var = qr{(?:\$|\$::)$re_sym}; my $re_const = qr{0x[0-9a-f]+|[0-9]+|[0-9]*\.[0-9]*}i; my $re_item = qr{(?:~\s*)?(?:$re_var|$re_const)}; my $re_op = qr{<<|>>|[+\-*/&|]}; my $re_expr = qr{( (?:\(\s*(?:$re_item|(?-1))\s*\)|$re_item) \s*$re_op\s* (?:$re_item|(?-1)|\(\s*(?:$re_item|(?-1))\s*\)) )}x; # [expr [dict get $regsC100 SYM] + HEXNUM] s/\[expr (\[dict get $re_var $re_sym\s*\] \+ *$re_const)\]/\[expr \{$1\}\]/; # [ expr (EXPR) ] # [ expr EXPR ] # note: $re_expr captures '$3' s/\[(\s*expr\s*)\((\s*$re_expr\s*)\)(\s*)\]/\[$1\{$2\}$4\]/; s/\[(\s*expr\s*)($re_expr)(\s*)\]/\[$1\{$2\}$4\]/; %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I0d6bddc6abf6dd29062f2b4e72b5a2b5080293b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6159 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-05-09tcl: fix typo and spellingAntonio Borneo1-1/+1
Identified by checkpatch script from Linux kernel v5.7-rc1 using the command find tcl/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types TYPO_SPELLING --strict -f {} \; Change-Id: I7b523f0ab5ec047ff167742a44c29984ac672cf4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5615 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2020-01-29tcl: replace the deprecated commands with "adapter ..."Antonio Borneo1-2/+2
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2016-10-17tcl/board: add Linksys WAG200G configVivien Didelot1-0/+1
The Linksys WAG200G router has a TI AR7 SoC and a 4MB Flash layout similar to the Netgear DG834v3 router [1]. Below is an example of a successful flash recovery, using a TUMPA, connected to the MIPS EJTAG 2.6 header (JP102) of the router. WAG200G [2] TUMPA [3] Desc Pin Pin Desc ------------------------ nTRST 1 3 nTRST TDI 3 5 TDI TDO 5 13 TDO TMS 7 7 TMS TCK 9 9 TCK nSRST 11 15 RST GND 2 4 GND Note that nSRST is optional to halt the CPU, but is required to probe the flash. For instance, recover the kernel with: $ sudo ./src/openocd -s tcl \ -f interface/ftdi/tumpa.cfg \ -f tools/firmware-recovery.tcl \ -c 'board linksys-wag200g; reset_config srst_only; flash_part kernel /path/to/kernel.bin; shutdown' [1] https://wiki.openwrt.org/toh/linksys/wag200g [2] https://www.linux-mips.org/wiki/JTAG#JTAG_headers [3] http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User's_Manual#20_PIN_JTAG_Connector Change-Id: I952ba9f706e2e4f8f95ca03a5fa58f391ca030b6 Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-on: http://openocd.zylin.com/3776 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-11tcl: add TP-LINK TL-MR3020 to the firmware recovery scriptOleksij Rempel1-0/+1
This adds the board to the list of supported devices for the easy recovery procedure. Only ram_boot is supported for this target. Change-Id: I144e1836f8b6257e96a42c98c2668da74ce243f6 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2520 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de>
2014-06-01tcl: add ASUS RT-N66U configPaul Fertser1-0/+1
CFI flashing verified with real hardware. RAM configuration wasn't attempted. Change-Id: I9185ab71430d799793befef708a15f62edba1663 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2153 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14tcl: bcm6348 target config, BT HomeHub v1 board configLee Bowyer1-0/+1
Also add the board to the firmware recovery script. Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0 Signed-off-by: Lee Bowyer <lee@sodnpoo.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/netgear-dg834v3.cfg: add to easy firmware recovery listPaul Fertser1-0/+1
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1851 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tools: add firmware recovery helpersPaul Fertser1-0/+108
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29tcl: add memory testing functions for board diagnosticsPaul Fertser1-0/+189
This is a tcl implementation of public domain tests by Michael Barr, http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C The initial porting is done by Shane Volpe and posted to the mailing list: http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.html This patch includes some cosmetic amendments plus hardcodes 32bit word size (as the code depends on memread32/memwrite32 anyway) which fixes original code's issue of testing only the first quarter of the specified nBytes. Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
generated by cgit v1.1 at 2024-07-17 08:39:51 +0000