aboutsummaryrefslogtreecommitdiff
path: root/src/openocd.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-18openocd: fix SPDX tag format for files .cAntonio Borneo1-1/+1
With the old checkpatch we cannot use the correct format for the SPDX tags in the file .c, in fact the C99 comments are not allowed and we had to use the block comment. With the new checkpatch, let's switch to the correct SPDX format. Change created automatically through the command: sed -i \ 's,^/\* *\(SPDX-License-Identifier: .*[^ ]\) *\*/$,// \1,' \ $(find src/ contrib/ -name \*.c) Change-Id: I6da16506baa7af718947562505dd49606d124171 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7153 Tested-by: jenkins
2022-08-15openocd: prevent target polling during 'init'Antonio Borneo1-0/+4
The command 'init' causes the execution of few lower level commands, e.g. 'target init', and switches from command mode COMMAND_CONFIG to COMMAND_EXEC, with an intermediate switch back to mode COMMAND_CONFIG. A timed target polling can occur during the execution of 'init' and the target's status can trigger the execution of some events. E.g. if a target has been left halted by a previous execution of OpenOCD, the first poll will find the target halted, calling the corresponding 'halted' event. The event handler can use commands that can only be executed in mode COMMAND_EXEC. If the poll happens while OpenOCD is in mode COMMAND_CONFIG, the triggered handler will fail. Prevent the target polling to operate during the execution of the 'init' command. Change-Id: Ia435a5d2039be9b247e2336616dab53ed5d983ac Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7007 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2022-07-23openocd: src: replace the GPL-2.0-or-later license tagAntonio Borneo1-13/+2
Replace the FSF boilerplate with the SPDX tag. The SPDX tag on files *.c is incorrect, as it should use the C99 single line comment using '//'. But current checkpatch doesn't allow C99 comments, so keep using standard C comments, by now. Change-Id: I30cd66ac7d737f1973c68fdbb841ffcf00e917c4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7072 Tested-by: jenkins
2022-05-14openocd: add post-init and pre-shutdown helpersAntonio Borneo1-0/+3
It is a common requirement to automatically execute some command after "init". This can be achieved, either in scripts or through OpenOCD command line, by explicitly calling "init" followed by the commands. But this approach fails if the request for post-init commands is spread across configuration files; only one of the files can split pre-init and post-init status by calling "init". The common workaround is to "rename" the command "init" and replace it with a TCL proc that calls the original "init" and the post-init commands. E.g. in Zephyr script [1]. To simplify and formalize the post-init execution, use a TCL list that contains the list of commands to be executed. Every script can contribute adding new commands, e.g. using "lappend". In the same way, formalize the pre-shutdown execution with a TCL list of user commands to be executed before OpenOCD exit. Document them and add trivial examples. Drop from documentation the suggestion to rename "shutdown". Change-Id: I9464fb40ccede3e7760d425873adca363b49a64f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Link: [1] https://github.com/zephyrproject-rtos/zephyr/blob/zephyr-v2.7.1/boards/arm/nucleo_h743zi/support/openocd.cfg#L15 Reviewed-on: https://review.openocd.org/c/openocd/+/6851 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2022-01-22log: fix memory leak when log to file is enabledAntonio Borneo1-0/+2
When log to file is enabled, the file is not closed by OpenOCD at exit. This is reported by Valgrind as a memory leak that is still reachable, as the internal buffers of 'FILE *log_output' are freed by the automatic fclose() at exit. Close the log file before exit. Change-Id: Id472c0d04462035254a9b49ecb0a4037263c6f6f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6789 Tested-by: jenkins
2021-11-13jtag: remove file driver.hAntonio Borneo1-2/+1
The only purpose of include file driver.h was to expose the API to register the adapter's commands. Move the prototype in adapter.h, already used by openocd.c. Change-Id: Ie1090c60ef9e5bac5ea187c87bed6e7b08d9671c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6645 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-11-13jtag: move prototype of adapter init/quit and speed to adapter.hAntonio Borneo1-0/+1
After moved the code, align the include files. Change-Id: I514a3020648816810d69f76c2ec4f6e52a1c57ab Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6643 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-09-04openocd: prepare for jimtcl 0.81 'expr' syntax changeAntonio Borneo1-0/+60
Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. All the scripts distributed with OpenOCD are already compliant with the new syntax. To avoid breaking user script, introduce a replacement for 'expr' command that handles the old syntax while issuing a deprecated warning. This change should be part of OpenOCD v0.12.0, then reverted. Change-Id: Ib08aa8ebcb634c81a3ce9d24fb4938b0418c947c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6510 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins
2021-08-14openocd: fix cleanup order: cti before dapAntonio Borneo1-1/+1
cti access is based on dap. During cleanup, drop cti before dropping dap to guarantee that cti can still access its dap. Change-Id: I40c7f67d4d4a32f53802c0ce7668a5321a05893c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6414 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-07-24openocd: remove NULL comparisons with checkpatch [2/2]Antonio Borneo1-1/+1
Patch generated automatically through a modified checkpatch that detects the patterns if (NULL == symbol) if (NULL != symbol) and through flags "--types COMPARISON_TO_NULL --fix-inplace". The unmodified checkpatch detects this pattern as Yoda condition, but it's odd fixing it as Yoda condition and then again as NULL comparison. This triggered the modification to the script. Change-Id: I5fe984a85e9c4fc799f049211797aef891ebce18 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6352 Tested-by: jenkins
2021-07-20openocd: fix simple cases of Yoda conditionAntonio Borneo1-8/+8
There are ~900 Yoda conditions to be aligned to the coding style. For recurrent Yoda conditions it's preferable using a trivial script in order to minimize the review effort. E.g. comparison of uppercase macro/enum with lowercase variable: - ...(ERROR_OK == retval)... + ...(retval == ERROR_OK)... Patch generated automatically with the command: sed -i \ 's/(\([A-Z][A-Z0-9_]*\) \([=!]=\) \([a-z][a-z0-9_]*\))/(\3 \2 \1)/g' \ $(find src/ -type f) While there, remove the braces {} around a single statement block to prevent warning from checkpatch. Change-Id: If585b0a4b4578879c87b2dd74d9e0025e275ec6b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6354 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com>
2021-04-18help: re-implement 'help' independent from tree of struct commandAntonio Borneo1-0/+1
The current implementation of "help" related commands is tightly connected to the tree of struct command. The TCL commands 'add_usage_text' and 'add_help_text' have to add fake commands in the tree of struct command to handle the help of TCL procs. Move all the help texts in a list accessible from the struct command_context and register the commands through their full name. Keep the list sorted alphabetically by the command name, so the result of commands 'help' and 'usage' will be sorted too. Remove the associated help and usage during commands un-register, but call help_del_all_commands() for the text added through TCL commands 'add_usage_text' and 'add_help_text'. The resulting help and usage output is not changed by this patch (tested on all the help and usage strings in current master branch). Change-Id: Ifd37bb5bd374cba1a22cd7aac208505b4ae1e6fc Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5670 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2021-03-19ioutil: drop the code, deprecated in v0.10.0Antonio Borneo1-4/+0
The code for ioutil has been marked as deprecated in release v0.10.0, 4 years ago. Time to drop it! Change-Id: I36dce1669ebe9acada5f9e752835c53e5214e3be Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6089 Tested-by: jenkins
2021-03-10arm_tpiu_swo: add support for independent TPIU and SWOAntonio Borneo1-0/+7
This is supposed to replace big part of armv7m_trace.[ch], since TPIU is not only the one implemented in Cortex-M3 and M4. Change-Id: I7588d16cbefe9cdb371c52fb0aa5cdfb48518804 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5858 Tested-by: jenkins
2020-12-02Add initial RTT supportMarc Schink1-0/+7
Real Time Transfer (RTT) is an interface specified by SEGGER based on basic memory reads and writes to transfer data bidirectionally between target and host. Every target that supports so called "background memory access", which means that the target memory can be accessed by the debugger while the target is running, can be used. RTT is especially of interest for targets which do not support Serial Wire Output (SWO) (e.g. ARM Cortex-M0) or where using semihosting is not possible (e.g. real-time applications) [1]. The data transfer is organized in channels where each channel consists of an up- and/or down-channel. See [2] for more details. Channels are exposed via TCP connections. One or more RTT server can be assigned to each channel to make them accessible to an unlimited number of TCP connections. The current implementation does not respect buffer flags which are used to determine what happens when writing to a full buffer. Note that the implementation is designed in a way that the RTT operations can be directly performed by an adapter (e.g. J-Link). [1] https://devzone.nordicsemi.com/tutorials/6/ [2] https://www.segger.com/jlink-rtt.html Change-Id: I8bc8a1b381fb74e08b8752d5cf53804cc573c1e0 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/4055 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-11-04openocd: convert function setup_command_handler() to staticAntonio Borneo1-4/+1
The function setup_command_handler() was used in the eCos build of OpenOCD, thus it was exported and a comment was added to remark it should remain not-static. Unfortunately the comment was missing the relevant information of the special build that requires so. Also unusual is that there is no include file that declares the prototype of the function. The comment above the function was added in two steps, in commit ea3e49f4e22d ("fix embedded builds") and commit fb96b8607a0c ("openocd: setup_command_handler() must not be static"), again without info about the special build. Also the mailing list archive does not report any further detail. The only hint is in the first commit above that also adds a test on BUILD_ECOSBOARD in a #if. Commit 39650e2273bc ("ecosboard: delete bit-rotted eCos code") removes all the eCos code, that effectively includes the both the prototype and the call to the function setup_command_handler(), http://openocd.zylin.com/#/c/503/2/src/ecosboard.c@a1092 but did not reverted the function to static. With all the 'external' uses of this function being dropped, set the function setup_command_handler() to static and remove the obsoleted and misleading comment. Change-Id: I4d6b83dec2a838119821189fc67949bfca070035 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5902 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-06-14openocd: fix issue in WIN32 with TCP adaptersTarek BOCHKATI1-0/+4
Issue: server_quit is called before adapter_quit: In WIN32 only in server_quit we do an WSACleanup, which terminates/closes all active sockets. So if the adapter is TCP based, the adapter.quit handler will fail if it will need to send some commands through TCP. Example: close_socket in jtag_vpi_quit will fail in WIN32 because the socket is already closed and the errno is set as "Bad File Descriptor" To fix that we introduced new functions called server_host_os_entry/quit to manage specific OS setup (hence WSA for sockets in WINDOWS) in order to delay WSACleanup after adapter_quit(). Change-Id: Ie4afacafe123857f6ae300e376bdfcf0d8c027ac Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5456 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-07-28mflash: Remove this broken flash driverAndreas Fritiofson1-5/+0
This is causing repeated build failures. Its design is so fundamentally broken that if someone actually wants to use it, a full rewrite is the only option. So it's not even worth deprecating in the hope that someone will notice and fix it, just get rid of it. Change-Id: I513069919a3873bd69253110f7fb6f622ee7d061 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5243 Tested-by: jenkins Reviewed-by: Jeffrey Booher-Kaeding <Jeff.Booher-Kaeding@arm.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2018-04-10armv8: valgrind memleak fixesMatthias Welwarsky1-0/+4
Various fixes for memory leaks, adds a target cleanup for aarch64 and ARM CTI objects. Change-Id: I2267f0894df655fdf73d70c11ed03df0b8f8d07d Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4478 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-03-30jtag/core, target: unregister JTAG eventsTomas Vanek1-2/+2
Also call adapter_exit() before command_exit() as the latter releases Jim interpreter so JTAG events should be released before. Fixes memory leak reported by valgrind Change-Id: I493f3fcba34ea2b4234148e79a4e329c866e0f05 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4474 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30target: fix display halt message logicTomas Vanek1-3/+3
If a target is run from gdb and then stopped from OpenOCD telnet interface, halt does not show message with status and PC registers. While on it rename 'display' to 'verbose_halt_msg' and use bool type instead of int. Change-Id: Ibe6589015b302e0be97258b06938c297745436a5 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4475 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30flash/nor: implement flash bank deallocation on OpenOCD exitTomas Vanek1-0/+1
Change-Id: I8fcf09b2a85b3b68743f5fd68a31edea933b9b17 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4414 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30target: restructure dap supportMatthias Welwarsky1-0/+6
- add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30arm_cti: add cti command groupMatthias Welwarsky1-0/+2
Extend the CTI abstraction to be accessible from TCL and change the 'target' command to accept a cti 'object' instead of a base address. This also allows accessing CTI instances that are not related to a configured target. Change-Id: Iac9ed0edca6f1be00fe93783a35c26077f6bc80a Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4031 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-15server: free strduped port numbersTomas Vanek1-0/+3
Although the leak is negligible, the clean heap on exit will ease valgrind testing. Change-Id: I3a7a9c8e8dc7557aa51d0b9caa244537e5e7007d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4410 Tested-by: jenkins
2018-03-15openocd.c: call server_quit() for cmd line with -c shutdownTomas Vanek1-2/+5
If OpenOCD command line contains -c shutdown, server_quit() is not called. Though if -c init is also on command line, gdb_server is already initialized. Call server_quit() on both successful and failure exit from command line. Change-Id: I6df41c5df045b61d84a5515d1abaa5dc96bc30ac Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4409 Tested-by: jenkins
2018-03-07helper/configuration: free script_search_dirs and config_file_namesTomas Vanek1-0/+2
Although the leak is negligible, the clean heap on exit will ease valgrind testing. Change-Id: If43f02fe594c30ceb1bea3259ea3e098d4b2d239 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4408 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
2018-01-17Fix Jim interpreter memory leakMarc Schink1-2/+2
Change-Id: I71d7d97e7dc315c42fc43b65cb5fcecd7bdfb581 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2959 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-04-25server/server: Remove all exit() callsMarc Schink1-1/+3
With this patch OpenOCD shuts down properly when errors occur in the server instead of just calling exit(). Change-Id: I2ae1a6153dafc88667951cab9152941cb487be85 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3223 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2016-12-08Remove build date from banner for releasesAndreas Fritiofson1-0/+5
In support for reproducible builds, see https://wiki.debian.org/ReproducibleBuilds Fixes Debian bug #834316. Change-Id: Id81ec72a87bf6dd99abfd2a0ae074658111bc9a3 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3866 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-05-24Remove FSF address from GPL noticesMarc Schink1-3/+1
Also make GPL notices consistent according to: https://www.gnu.org/licenses/gpl-howto.html Change-Id: I84c9df40a774958a7ed91460c5d931cfab9f45ba Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3488 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-04-16docs: update OpenOCD url's to openocd.org domainSpencer Oliver1-1/+1
Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2698 Tested-by: jenkins
2015-04-14Tcl exception codes cleanup, shutdown command amendmentsPaul Fertser1-3/+11
This patch might influence openocd Tcl commands behaviour in subtle ways, please give it a nice testing. The idea is that if an OpenOCD Tcl command returns an error, an exception is raised, and then the return code is propogated all the way up (or to the "catch" if present). This allows to detect "shutdown" which is not actually an error but has to raise an exception to stop execution of the commands that follow it in the script. openocd_thread special-cases shutdown because it should then terminate OpenOCD with a success error code, unless shutdown was called with an optional "error" argument which means terminate with a non-zero exit code. Change-Id: I7b6fa8a2e24c947dc45d8def0008b4b007c478b3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2600 Tested-by: jenkins Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com> Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2015-03-09Added system signal handling to Linux versionMateusz Manowiecki1-8/+11
(with http://www.cons.org/cracauer/sigint.html in mind) Change-Id: I15f559bc1122a408c3fb9338ba55c16fab3187e1 Signed-off-by: Mateusz Manowiecki <segmentation@fault.pl> Reviewed-on: http://openocd.zylin.com/2443 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-08-02Fix some problems with the bin2char utilityAndreas Fritiofson1-2/+6
Don't hardcode the type for the array, just output the array initializer so the includer can choose the type and storage class, zero-terminate at will and so on. Change-Id: I6d5e0710eaaba0a218b3eb32f6569177356f4462 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2176 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-06-05update files to correct FSF addressSpencer Oliver1-1/+1
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2012-07-22Revert "When calling openocd from a shell like this:"Alex Austin1-2/+0
This reverts commit e8641695c634109ebf5f1149923971770da1d28a Original premise was wrong. Proper command is "shutdown", not "exit". Change-Id: I07f5fe0dda9c24abe53628da986bfda0e406bb4a Signed-off-by: Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on: http://openocd.zylin.com/757 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-11When calling openocd from a shell like this:Stian Skjelsad1-0/+2
openocd -f board/sheevaplug.cfg -c init -c exit the calling shell will believe that openocd exited with an error due to exitval will be non-zero This is not tested against incomming telnet Change-Id: I63d15715a7b46f39a7de261a45039f8c3cad7a98 Signed-off-by: Stian Skjelstad <stian@nixia.no> Reviewed-on: http://openocd.zylin.com/470 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-02-06build: cleanup src/ directorySpencer Oliver1-23/+16
Change-Id: Ia6ed99ce75625ad6ef5e0d3c3bbdc1c1bec21df3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/407 Tested-by: jenkins
2012-01-04command: print BUG warning when usage is missingMathias K1-2/+3
These error messages will prompt patches to be submitted for missing .usage or empty fields. All of the below must be resolved before next release. The Jim defined commands are excluded from this checklist because the help text can be set later than during command registration. strlen(.usage) == 0 means that the command expects no arguments. Updates to this patch in Gerrit to fix problems below are most welcome. Anyone can push updated versions of a patch to Gerrit. If there are no further updates to this patch within a week, it will be pushed to the master branch to prompt more fixes. These were caught by launching OpenOCD. Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/299 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-02openocd.c: whitespace cleanupSpencer Oliver1-4/+3
Change-Id: Ieb8c1e4eb72f66a6343b169a12a058555d67069e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/242 Tested-by: jenkins
2011-11-23target: fix init_targets script handlingSpencer Oliver1-4/+0
This fixes an issue when init is called before init_targets has been executed. Make sure init_targets is called before init. Change-Id: Icd5bd4c2a8eea2e399d9de4e331a77560e9672ac Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/235 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-11replace berlios url's with sourceforge url'sSpencer Oliver1-1/+1
Change-Id: I1c9957bb64df87cee7c5e832f21453eb8934a5fb Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-14jimtcl: delete OpenOCD's broken 'stacktrace' commandØyvind Harboe1-31/+0
Use "info stacktrace" instead. This fixes build problems with latest Jim Tcl.
2011-06-16OPENOCD: Renamed ambiguous main2() into openocd_thread() to show possible ↵Tomek CEDRO1-2/+7
solution for thread support in future.
2011-06-13transport: move files over to transport folderØyvind Harboe1-1/+1
as we introduce swd and jtag as two transports, we want to start up with a new transport folder to organize the code a bit.
2011-03-31startup: fix bugs in cleanup upon errors during startupØyvind Harboe1-26/+33
Importantly adapter cleanup will now happen upon startup failure. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-29Compilation Warnings on OS X 10.5Andrew MacIsaac1-1/+1
I received a number of "-Wshadow" related warnings (treated as errors) while trying to build on OS X Leopard. In addition, there were two miscellaneous other warnings in the flash drivers. Attached are two patches which correct these issues and the commit messages to accompany them. My system has the following configuration (taken from uname -a): Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 === Werror_patch.txt Commit Message === compilation: fixes for -Wshadow warnings on OS X These changes fix -Wshadow compilation warnings on OS X 10.5.8 Compiled with the following configure command: ../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink --enable-ft2232_libftdi === flash_patch.txt Commit Message === compilation: fixes for flash driver warnings on OS X These changes fix two compilation warnings on OS X 10.5.8: ../../../../src/flash/nor/at91sam3.c:2767: warning: redundant redeclaration of 'at91sam3_flash' ../../../../src/flash/nor/at91sam3.c:101: warning: previous declaration of 'at91sam3_flash' was here and ../../../../src/flash/nor/stmsmi.c:205: warning: format not a string literal and no format arguments Compiled with the following configure command: ../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink --enable-ft2232_libftdi === Andrew
2010-12-22config: add init_targets proc that is executed just before initØyvind Harboe1-0/+4
this allows configuration scripts to export a init_targets proc rather than setting up the target directly. This allows for new conventions in how to set up target vs. board script and how to transfer default settings between board and target scripts. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-11-15httpd: retire this serverØyvind Harboe1-6/+0
this never panned out and there are enough mistakes in the code that probably nobody used this. Use the tcl server and implement a standalone http app instead works fine. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
generated by cgit v1.1 at 2024-11-08 02:02:57 +0000