aboutsummaryrefslogtreecommitdiff
path: root/src/helper
AgeCommit message (Collapse)AuthorFilesLines
2014-06-28swd: Improve parity calculation and move it to types.hAndreas Fritiofson1-0/+19
It could be reused by SWD drivers and in other places. Change-Id: Ieed0cf70c111a73d3a42ed59f46a0cdd177a73d5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1957 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-05-09Update to the current Jim TclPaul Fertser2-3/+3
This is a post-release version but hopefully some fixes that went in are worth it; also the changes here make OpenOCD compatible with stock 0.75 version if a distro maintainer decides to use it. Change-Id: I7ad1814c7c4868198475cdca4750c3d0ee4f5f8b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2121 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-03-30Don't cast return value of [cm]allocAndreas Fritiofson1-1/+1
Change-Id: I0028a5b6757b1ba00031893d9a2a1725f915a0d5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2069 Tested-by: jenkins Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09command: Fix formatting for empty usage stringAndreas Fritiofson1-1/+1
Introduced by requirement in 54d6330b. Change-Id: If3dba057127b54b15ca7f364f37c6286d34f77e0 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1858 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Add %APPDATA%\OpenOCD to script search path on winAndreas Fritiofson1-0/+11
Change-Id: I01e9715fe064f3ff41e41a59a4764d6474f82183 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1797 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Remove special handling of script search path on WindowsAndreas Fritiofson1-42/+42
On all platforms, search for scripts in $HOME/.openocd ${run_prefix}${pkgdatadir}/site ${run_prefix}${pkgdatadir}/scripts On Windows, set run_prefix to the runtime path of the executable, minus ${bindir}. This is to enable the install dir to be moved anywhere, as long as the structure of the install dir is kept intact. On all other platforms, run_prefix is empty. The script paths can now be adjusted on Windows builds the normal way; by overriding pkgdatadir at build time. For example, to create a Windows package layout of bin/openocd.exe scripts/interface/... scripts/target/... you can do configure --prefix= --enable-... and then make pkgdatadir= DESTDIR=/some/path clean all install Also, remove the unused PKGLIBDIR define. Change-Id: If2c8228fc80c598d763efad21c5f51695ff9b6cf Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1796 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-01[PATCH 1/2]support64: Add functions into types and targetDongxue Zhang1-0/+47
Add functions into types.h, target.c, target.h to operate 64bits data. Prepare for 64bits mips target. Change-Id: I668a8a5ac12ba754ae310fa6e92cfc91af850b1c Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Reviewed-on: http://openocd.zylin.com/1700 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-01Add byte-swap helpersAndreas Fritiofson1-0/+40
Change-Id: I970616bb0e2bbc693165a0d311840febbd9134f1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1798 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Franck Jullien <franck.jullien@gmail.com>
2013-10-31ioutil: Remove unnecessary casts and fix const-discardingAndreas Fritiofson1-8/+7
Using the right parameter type, there's no need to resort to casting. Change-Id: I8aec852431ead26e24793fd6fac8781353963bf2 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1777 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Jens Bauer <jens@gpio.dk>
2013-10-31binarybuffer: Remove unnecessary cast and fix hidden "bug"Andreas Fritiofson2-6/+6
Because of the cast, the const decoration on the parameter provided no guarantee against modification since it was silently discarded. Change-Id: Ib83ade955e1a61ee2175c690620437b5e19cbb6a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1776 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Remove unnecessary castsAndreas Fritiofson2-5/+3
Change-Id: Ia97283707282ccccdc707c969f59337313b4e291 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1767 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Clean up const usage to avoid excessive castingAndreas Fritiofson3-22/+19
Don't use const on pointers that hold heap allocated data, because that means functions that free them must cast away the const. Do use const on pointer parameters or fields that needn't be modified. Remove pointer casts that are no longer needed after fixing the constness. Change-Id: I5d206f5019982fd1950bc6d6d07b6062dc24e886 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1668 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-26Add new target type: OpenRISCFranck Jullien2-0/+22
Add support for OpenRISC target. This implementation supports the adv_debug_sys debug unit core. The mohor dbg_if is not supported. Support for mohor TAP core and Altera Virtual JTAG core are also provided. Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1547 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-13libusb: require pkg-config supportPaul Fertser2-1/+3
An alternative approach to show how much cleaner the pure pkg-config way is. This changes the discovery procedures for libusb-1.0 and libusb-0.1, making them depend on pkg-config being properly installed and configured, including the necessary build host configuration for the cross-builds (see http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html) It should make it possible to compile OpenOCD without changes and extra effort on GNU/Linux, FreeBSD users would need to supply a .pc file for their libusb implementation or add LIBUSB1_LIBS and LIBUSB1_CFLAGS to the configure environment. Change-Id: I826e378dd1e0d101a549a573b2c63212a7e00b64 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1467 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-08build: remove clang warning about global var 'match'Spencer Oliver1-18/+18
remove clang warning - "Argument to free() is the address of a global variable, which is not memory allocated by malloc()". Change-Id: I015273eafc9644207684b363434c6ae8149bfcde Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1613 Tested-by: jenkins
2013-07-01Add support for 64 bit parameter to irscanEvan Hunter3-13/+94
Change-Id: I89e0422456c59ee86c4b6d9bd3b3ad32051b31ac Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/831 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12libusb1_common, ftdi: clarify libusb_open error messagePaul Fertser2-0/+46
Print a user-friendly message when libusb_open() fails, e.g. Error: libusb_open() failed with LIBUSB_ERROR_ACCESS when there's a permissions problem. Also output a configure warning if libusb older than 1.0.9 is detected. Change-Id: I800f71f06672fe06c0a98a4e469f853b5021bcfe Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1430 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver24-24/+24
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-04-21telnet: add telnet history supportSpencer Oliver2-0/+45
adapted from Yoshinori Sato's patch: https://github.com/ysat0/openocd/commit/2f07f4600a0da8206612d78c159bbe1171aa41c2 Change-Id: I084b86d316b0aa6e9593f007c024961dbda805e9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1310 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-01-31helper: hexify correctly handle signed charsSpencer Oliver1-1/+1
The current implementation of hexify was not correctly handling signed chars. This function is currently used by the ti-icdi driver and as such was causing random write issues. As a note perhaps a better long term fix would be to change to using uint8_t buffers rather than char. This will require changes to the ti-icdi driver aswell. Change-Id: I572e69ff2b99227a7d412de056458c0393794b03 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1124 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-12-24helper: improve windows gdb pipe performanceSpencer Oliver1-2/+3
Reducing the select and MsgWaitForMultipleObjects timeouts to 1ms makes a 2-300+% increase in the step time of gdb when using pipes under windows OS. Change-Id: Id7e52cfb2b206347a9caea61672885a3e2b186de Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1050 Tested-by: jenkins
2012-12-23icdi: add TI icdi interfaceSpencer Oliver2-0/+32
This is the new proprietary interface replacing the older FTDI based adapters. It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad. Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/922 Tested-by: jenkins
2012-12-03helper: fix code formattingSpencer Oliver1-12/+6
Change-Id: Ide2d704c9ef4f5563649d5db53bbdd3641868b70 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/995 Tested-by: jenkins
2012-11-30Make NetBSD a recognized systemAymeric Vincent1-0/+2
Change-Id: I7fcb540553da7833a8b6a82335a7296539a8f491 Signed-off-by: Aymeric Vincent <vincent.aymeric@gmail.com> Reviewed-on: http://openocd.zylin.com/998 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-10-28ioutil: make the file compile on MacOSEdgar Grimberg1-1/+12
The meminfo command cannot exist if the malloc.h header is not present. Cannot get the mac address without sys/ioctl.h and SIOCGIFHWADDR defined Change-Id: Ifc0fb98c3a60c53ad2e19473e08b34c460529d0b Signed-off-by: Edgar Grimberg <edgar.grimberg@gmail.com> Reviewed-on: http://openocd.zylin.com/912 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-02build: remove unnecessary jim.h includeSpencer Oliver1-1/+0
as well as not being required, as it is already included by jim-nvp.h. It also makes the doxygen output a bit clearer to read. Change-Id: Ia2bed7142b4a56b48b1ecf0734e63f860dcd1014 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/859 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Add another scripts search path for Windows buildsFreddie Chopin1-28/+37
Add single "scripts" folder to search path for Windows OpenOCD builds that don't use cygwin bin/openocd.exe scripts/interface/dummy.cfg scripts/target/at91eb40a.cfg Do some refactoring of current code (thx to Andreas). Change-Id: Idbb08d1368b06f25da44f4f9ab1511db992b1724 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/785 Tested-by: jenkins
2012-08-24helper: command.c cleanupSpencer Oliver1-8/+10
Change-Id: I66643960e38625e843b5f54d1c072e4eee78284d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/772 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-27Test the incoming debug_level, rather than the current.Alan Bowman1-1/+1
The existing code tests the current debug_level for validity, allowing the user to set it too high and never change it after that. The new behaviour is to test the debug_level that the user has requested. Change-Id: I85726a2e606c8d137e9b1cfe76fee865084844b1 Signed-off-by: Alan Bowman <alan.michael.bowman@gmail.com> Reviewed-on: http://openocd.zylin.com/764 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-07-22Revert "When calling openocd from a shell like this:"Alex Austin2-11/+7
This reverts commit e8641695c634109ebf5f1149923971770da1d28a Original premise was wrong. Proper command is "shutdown", not "exit". Change-Id: I07f5fe0dda9c24abe53628da986bfda0e406bb4a Signed-off-by: Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on: http://openocd.zylin.com/757 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-11When calling openocd from a shell like this:Stian Skjelsad2-7/+11
openocd -f board/sheevaplug.cfg -c init -c exit the calling shell will believe that openocd exited with an error due to exitval will be non-zero This is not tested against incomming telnet Change-Id: I63d15715a7b46f39a7de261a45039f8c3cad7a98 Signed-off-by: Stian Skjelstad <stian@nixia.no> Reviewed-on: http://openocd.zylin.com/470 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-06Add a bit-level transfer queueAndreas Fritiofson4-1/+809
Interface drivers regularly need to keep track of where each part of a long read buffer should be copied, once that data arrives. Both source and destination are often at an arbitrary bit offset. This queued bit-level copy can help with that, by allowing the driver to perform postponed reads from the receive buffer already when building the transmit buffer, and have those reads executed at a later time when data is available. For simplicity, it uses the linked list implementation list.h imported from the Linux kernel. Change-Id: I06862a0a6f057cbbcacfb021f17a795195faded2 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/450 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-21build: add helper/types.h to config.hSpencer Oliver4-10/+0
this header is used in numerous files and adding to config.h simplifies its use globally. Change-Id: Id724a9950b90504721233022c7fb5768e9bc5548 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/649 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-19remote_bitbang: fix native windows buildSpencer Oliver1-0/+9
Change-Id: Ied29ade0346c4595ffc1dafa788e2d5a595e0de3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/648 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-03-31Add value "openbsd" for ocd_HOSTOS.Wim Lewis1-0/+2
Change-Id: I9b0dd87d85c0792730f507176001d39c44da7117 Signed-off-by: Wim Lewis <wiml@hhhh.org> Reviewed-on: http://openocd.zylin.com/547 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-13ecosboard: delete bit-rotted eCos codeØyvind Harboe7-71/+1
Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/503 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
2012-03-11flash: retire unused eCos flash driverØyvind Harboe1-2/+0
even the AT91EB40a's flash is covered by CFI and nobody ever submitted any other drivers based on eCos code. It's just possible that this idea was missing documentation and "marketing", but it's in git if somebody wants to resurrect it. Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/502 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-06doxygen: use correct comment syntaxSpencer Oliver4-12/+12
This issue was caused by uncrustify not correctly converting the doxygen comments. Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Change-Id: Ie6dc3b057a08603b670cb27312e5f0d989426e6c Reviewed-on: http://openocd.zylin.com/431 Tested-by: jenkins
2012-02-06build: cleanup src/helper directorySpencer Oliver25-1202/+986
Change-Id: I71a312df783995e9083c345c25e73902d5aef59e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/415 Tested-by: jenkins
2012-01-04Change return value on error.Mathias K1-6/+1
On wrong parameters a error is signalized to the calling function. Change-Id: I484443fdb39938e20382edc9246d5ec546a5c960 Signed-off-by: Mathias K <kesmtp@freenet.de> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/282 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-04retire ERROR_INVALID_ARGUMENTS and replace with ERROR_COMMAND_SYNTAX_ERRORØyvind Harboe5-21/+20
Change-Id: I6dee51e1fab1944085391f274a343cdb9014c7a4 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/300 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-04command: print BUG warning when usage is missingMathias K1-0/+16
These error messages will prompt patches to be submitted for missing .usage or empty fields. All of the below must be resolved before next release. The Jim defined commands are excluded from this checklist because the help text can be set later than during command registration. strlen(.usage) == 0 means that the command expects no arguments. Updates to this patch in Gerrit to fix problems below are most welcome. Anyone can push updated versions of a patch to Gerrit. If there are no further updates to this patch within a week, it will be pushed to the master branch to prompt more fixes. These were caught by launching OpenOCD. Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/299 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03helper: fix arm11 help textSpencer Oliver1-3/+5
This fixes a long standing bug: see Trac #4 Increased help text recursion limit and added LOG_DEBUG so we can catch future errors like this. Change-Id: I5fac95c4486eaddaf1e88a27ecb1835168f87711 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/291 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-12-31build: fix mingw build issuesSpencer Oliver1-0/+3
8901fca0270fec41b12c30c7dbd806d460548c5b broke the build under mingw, this fixes that. Change-Id: I22b91e220dac3b68cc576b65a9f1b8711e64263a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/298 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-12-01binarybuffer: use strndup to allocate stringSpencer Oliver1-4/+2
Change-Id: I65d8f37b18d5b5a798406b956f50ab7bb550e172 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/246 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-10-24Fix "Evaluate 'script' in the global scope"Freddie Chopin1-1/+1
This fixes commit Evaluate 'script' in the global scope. It caused Windows builds behave differently than before because path was evaluated twice and backslashes from Windows' paths got unescaped and effectively wiped out. Configs could only be passed with "-f ../dir/config.cfg" or "-f ..\\dir\\config.cfg" instead of usual "-f dir/config.cfg" (or using backslash) as previously. Change-Id: I13b4abac6dbe6d770cc11a4e61c9421ef340da83 Author: Steve Bennett <steveb@workware.net.au> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/40 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-21jim: add missing jim licenseSpencer Oliver2-0/+86
Change-Id: Ib8e34739d92cd54655b9b47d07b856a82ff25f3c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/39 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-09-30jim-nvp is moving from jimtcl to openocdSteve Bennett3-2/+617
The jim-nvp code is specific to openocd, so it belongs in openocd, not in the core jimtcl. Signed-off-by: Steve Bennett <steveb@workware.net.au>
2011-08-11Evaluate 'script' in the global scopeSteve Bennett1-2/+2
Scripts sourced via 'script' should evaluate in the global scope to make it easy to set and reference global variables. Signed-off-by: Steve Bennett <steveb@workware.net.au>
2011-04-28ecos: add 64 bit types for sprintf/sscanfØyvind Harboe1-0/+2
generated by cgit v1.1 at 2024-11-09 23:16:38 +0000