aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-09-26Add new target type: OpenRISCFranck Jullien16-0/+3220
Add support for OpenRISC target. This implementation supports the adv_debug_sys debug unit core. The mohor dbg_if is not supported. Support for mohor TAP core and Altera Virtual JTAG core are also provided. Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1547 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-26Require Autoconf >= 2.64Paul Fertser2-2/+2
m4_argn macro was introduced in v2.63b-34-g46e87de on the 22nd of Apr 2009. Change-Id: Id01cc9f0ffdb46cf6dfd26c3bf3b5efa0ddd2984 Reported-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1656 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-25jlink: improve USB read during jlink_tap_executePhilip Craig1-55/+14
Previously, when doing EMU_CMD_HW_JTAG3 commands we would do two reads, one to read the data, and one to read the result. However, we can just do a single larger read instead. The motivation for this change is a weird problem. If I run the Segger software before running OpenOCD, then the first read always fails: Error: usb_bulk_read failed (requested=1, result=0) Error: jlink_tap_execute, wrong result -107 (expected 1) Sniffing the USB traffic shows that the J-Link is returning an overflow error, meaning it is expecting to return the full result in a single read. Change-Id: I75e020d3b3732c9a74ee3d31838fdf17a7fac24c Signed-off-by: Philip Craig <phil@blackmoth.com.au> Reviewed-on: http://openocd.zylin.com/1447 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-25target: Fix strange ordering in target_read_u8Andreas Fritiofson1-1/+2
It's been like this since the check was added, in 5aa93a5e. Change-Id: Iaa0586e0cd1ce57ad92735dcc3e51108a133fe96 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1640 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-25jlink: Replace crazy home cooked assertion with a real oneAndreas Fritiofson1-5/+1
Change-Id: I83d66ddef34965dd94a0ff76aa1367cc9d19f2df Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1644 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-25doc: correctly terminate @xrefSpencer Oliver1-1/+1
@xref should be terminated by either a ',' or '.'. Change-Id: I141335cd4e149992fc971c6f2c04f1dbe390c8f4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1637 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-25bus_blaster: do not fail on missing get_latency_timerSøren Jørvang2-8/+6
Patch submitted from Trac #64 Seems certain clones do not correctly emulate the ftdi chip, if the call to read the latency timer fails then do not treat this as a failure. Change-Id: Iae671b926d101adf1010639d11ca46c58d0af524 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1627 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-25build: fix NetBSD build warningPetri Laakso1-9/+4
Seems NetBSD does like the name reboot, so rename to keep happy. Change-Id: I60ada9d217c4a8386a8d1ff1c88db7335451794e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1623 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-25hla: move memory read/write functionality to driverSpencer Oliver6-90/+219
Due to issues reported when using the jtag mode of the stlink (see Trac #61), the functionality/checking has been moved to the driver. This change also fixes unaligned 32bit memory read/write for the stlink. From testing this change also brings a 3KiB/s speed increase, this is due to the larger read/write packets. Change-Id: I8234110e7e49a683f4dadd54c442ecdc3c47b320 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1632 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-25stlink: remove usb timeout magic numbersSpencer Oliver1-5/+8
Change-Id: I4ec4cb0bc344c4c1de9113fa12ed84e5e2e87b31 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1631 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-25hla: cleanup read/write apiSpencer Oliver4-58/+49
This is the first part in moving the adapter specific api back into the driver. The next task is to also move the hla read/write buffer size handling. Change-Id: I86a19144b50b6de18659bfcd05b3729b2cafc051 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1621 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-25README.Windows: MinGW-w64 is known to work for building, regular MinGW is quirkyPaul Fertser1-4/+6
The regular MinGW doesn't work properly because it doesn't try to provide C99 compatibility currently. Change-Id: I27c1b9e1496a8c32032fab08a29cbe1124316edd Reported-by: Tomáš Voda <Voda.Tomas@seznam.cz> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1638 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-21armv7m: add gdb target description supportSpencer Oliver1-45/+56
Change-Id: I7c01109c0b85d208fb04a7ae1185fab4b2ab96b8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1620 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-21gdb: cleanup gdb target description supportSpencer Oliver1-13/+50
Make sure we free any memory used for gdb_save_tdesc. Change-Id: Ia226f6134318c8c6b0ac4fa20fe70a570a08d80d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1619 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-21gdb: enable target description support by defaultSpencer Oliver1-4/+63
This enables gdb target description support by default, it will check that this is supported by the active target. Change-Id: Iea5a5b94c5e373af30dacb780020b79536caa1e3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1618 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-21armv7m: remove gdb register hacksSpencer Oliver4-82/+1
Now that we support the target description format we do not need these hacks anymore, we can now tell gdb what registers we support. Change-Id: Ie774231d296420b35efcf708bc4435475c87ff5e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1617 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-21gdb: add default description reg typesSpencer Oliver2-0/+6
Add support for the default gdb register description type "int" and "float". When this is given to gdb it will use the bitsize to determine the reg size. Change-Id: Iaeed594d1feece54044128eae1baff9858bdcae0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1622 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-21Restore mwh/mwb functionality.Andreas Fritiofson1-8/+2
Half-word and byte writes using mwh/mwb has been completely broken since bf71e34cbf, because it dispatched all writes, regardless of access size, to target_write_buffer(), which uses as large accesses as possible. Partially revert the commit by changing back to the correct write method. Change-Id: I60731fc576bf4a076a7da02bee7879e121c21d17 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1628 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-20adiv5: check packed transfers are supportedSpencer Oliver2-4/+30
Currently we try and use MEM-AP packed transfers as much as possible for 8/16bit transfers. However not all targets support packed transfers, so check before using. Change-Id: I66256007f25ccd0c583f23db5acf6d1aa8b5e57d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1602 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-18README.Windows: pkgconfig-lite should go into MinGW, not MSYSPaul Fertser1-1/+1
As autoconf is part of MinGW, it uses its root to find m4 files, pkg-config should be installed accordingly. Change-Id: I551797e61a3d044f751768bd7d57d8e26e7202cc Reported-by: Tomáš Voda <Voda.Tomas@seznam.cz> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1630 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-16README: add missing adapters and flash drivers, mention profilingPaul Fertser1-10/+11
This updates README with all the "keywords" added since the initial upstream submission (and finally fixes the typo in the beginning). Change-Id: Ia071267246fe6afc19fc0bfcda83c4778e7ff5b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1624 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-16configure: expand library search for libftd2xxStephan Linz1-1/+1
Error was: checking for library containing FT_GetLibraryVersion... no configure: error: You appear to be missing the FTD2xx driver library. Reason were two cases: Case one: The FTD2xx library uses clock_gettime() and in normal cases the linker will find the function in the libc library. Most (older) systems require the program be linked with the librt library to use these (see man clock_gettime: Link with -lrt). Case two: You can rebuild the FTD2xx library (relink from the object files) against the primary (system wide installed) libusb-1.0. So you avoid mixed code (GPL with proprietary code) in the FTD2xx library. In this case, the FTD2xx library provides no private (linked in) libusb-1.0 functionality and require the program be linked with the libftd2xx __AND__ the libusb-1.0 to resolve all the libusb-1.0 symbols. Change-Id: Iaf9a35ab4257e37b98dccd47667378ad2a64b7ed Signed-off-by: Stephan Linz <linz@li-pro.net> Reviewed-on: http://openocd.zylin.com/1614 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-15contrib: Add example cross-build scriptAndreas Fritiofson1-0/+104
Usage: export LIBUSB1_SRC=/path/to/libusb-1.0 export OPENOCD_CONFIG="--enable-..." cd /work/dir /path/to/openocd/contrib/cross-build.sh <host-triplet> For static linking, a workaround is to export LIBUSB1_CONFIG="--enable-static --disable-shared" All the paths must not contain any spaces. Feel free to comment or update this patchset with improvements. Change-Id: Ib3b4970117f13a6140a1eddc493d324a52364519 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1531 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13configure: Add libusb-1.0 header bug workaroundAndreas Fritiofson1-0/+2
Force the libusb-1.0 include dir to be treated as a system include path which suppresses the cast-align warnings otherwise failing the build on some platforms. Change-Id: I738cfd793052b8772731d2feeef968ee893bd4bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1534 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13configure: auto-enable USB adapters based on libusb availabilityPaul Fertser2-161/+90
This unifies the way the USB adapters are handled, and enables them automatically whenever possible (until explicitly disabled). If an adapter is explicitly enabled but can't be built, abort the configure. Also add infrastructure for generic handling of adapter drivers in configure and print a summary of the configuration results after finishing. The m4 quoting is as conservative as I could get it, and seems appropriate. Change-Id: I1655691e5ea0d8eb9e3f67830b96992ffe33640a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1475 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13libusb: require pkg-config supportPaul Fertser12-19/+46
An alternative approach to show how much cleaner the pure pkg-config way is. This changes the discovery procedures for libusb-1.0 and libusb-0.1, making them depend on pkg-config being properly installed and configured, including the necessary build host configuration for the cross-builds (see http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html) It should make it possible to compile OpenOCD without changes and extra effort on GNU/Linux, FreeBSD users would need to supply a .pc file for their libusb implementation or add LIBUSB1_LIBS and LIBUSB1_CFLAGS to the configure environment. Change-Id: I826e378dd1e0d101a549a573b2c63212a7e00b64 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1467 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13README* refactoringPaul Fertser5-384/+231
This is an attempt to bring the README files in line with the current status of the OpenOCD development. - remove some obsolete information and duplicated instructions - reword some statements - restructure in a way more appealing to a regular user - add a supported hardware list to allow a potential user to determine if his/her usecase is covered by a freetext keyword search through the document - Add OSX notes (courtesy GrizzlyAdams and inca) Since most ftdi-based adapters are now covered by the ftdi driver, I think it's ok to remove some of the libftdi/ftd2xx instructions, the few users who still need them should refer to upstream docs instead. I'm not sure if README.Windows should come with the DOS line endings, but i'd expect many windows users to use their silly notepad to view it, and notepad ignores LF apparently. (Decided to use LF anyway.) I understand discussing and reviewing such a massive README change is a somewhat demanding task but I feel it's a necessity to move forward maintaining proper documentation. Change-Id: Idfde3014c72dd5c32ad292ee1ab205322e51a138 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1503 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-13flash: add Nuvoton NUC910 series supportNemui Trinomius3-1/+644
Not tested, adapted from http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: Ic3273e64fd99bffab16764b06227e09a05d07c8f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1510 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2013-09-13nds32: remove .soft_reset_halt dependencyHsiangkai Wang6-32/+22
.soft_reset_halt is not necessary for nds32 target. Remove the dependency. Change-Id: Ic3b126d6c7eb995583a661b762627e736222fcaa Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1612 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13aice: add target name to nds command messagesHsiangkai Wang1-43/+68
Change-Id: Ie6c786c6880fb554af54ed27f1c159326f60a701 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1583 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: support multi-target debuggingHsiangkai Wang12-745/+822
Change-Id: If767f646b234dbcdb01946e5d13a3a6a29df2d78 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1581 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: Use DMA to access memory as no DCacheHsiangkai Wang1-7/+13
As GDB uses file-I/O protocol to access memory, use DMA to access if no DCache. This commit improves the performance of Andes Virtual Hosting. Change-Id: I36bb2154b9f497fc4237625836cf8c7115330a60 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1580 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: modify nds commands implementationHsiangkai Wang1-25/+15
Modify handle_nds32_memory_access_command: do not use DCache setting to block user's setting. Change-Id: I2d33f893773e2a2e3e2f26edde5938ef5902609d Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1579 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: support FreeRTOSHsiangkai Wang3-1/+61
Change-Id: I117b5541fb19388c0f5c2344ee42d9151c9a222e Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1577 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: report any one of hit read watchpointsHsiangkai Wang1-0/+9
If multiple read watchpoints are hit at the same time, report any one of these hit watchpoints. Change-Id: I8d4439aa80e4b62bb7d48bbdc0450920e2008a2e Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1576 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: change default valueHsiangkai Wang2-2/+2
Change-Id: I0505bdc0e75543a3b205981339c5b9fa78a080ca Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1575 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: always polling after gdb attachedHsiangkai Wang5-26/+4
Do not turn on/off polling as leave/enter debug mode. Enable polling after gdb attached, and disable polling after gdb detached. Change-Id: Id64459b86f44937af7ea5ccfe2cd13e31732eecf Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1574 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: support Andes profiling functionHsiangkai Wang5-1/+192
Change-Id: Ibc45ec5777d6841956c02de6b4ae8e74c2a6de37 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1585 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13target: enhance target profilingHsiangkai Wang1-16/+40
1. gprof uses 2-bytes as minimum bucket size. 2. As user wants to use gprof --sum to summarize multiple profiling data files, the range MUST be the same. Add new arguments to specify profiling range. Change-Id: Ie7e6afa6a4d82250e2d194a0eed2b428c1479ea1 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1572 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13target: add profiling interfaceHsiangkai Wang2-64/+108
Profiling could be target-specific. Add .profiling interface to target_type. Change-Id: Ic0eea9db742971db1350a474fbbb5ed24565922b Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1571 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13target: increase the maximum number of bucketsHsiangkai Wang1-1/+3
I do not know what is the reasonable number of buckets. If there are enough buckets, the result will be accurate. I propose increase the maximum number of buckets to 128K. If the size of program text section is less than 256KB, every two bytes will be occupied by one buckets. (The minimum size of one buckets is 2 bytes in gprof implementation.) Change-Id: If9147743cefdc36f40f21e6dc73b9b28f28c9e1e Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1608 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13target: Correct profiling calculationHsiangkai Wang1-3/+7
1. high_pc should be (maximum sample + 1) (Refer to gprof source code) 2. bucket index should be sample offset --------------- x (number of bucket) sample range For example, if minimum sample is 0 and maximum sample is 5 and the number of bucket is 3. a = sampled_address - 0 b = 3 c = 6 (a, b, c refer to source code variables) sampled_address = 0, => a = 0, => bucket_index = 0 sampled_address = 1, => a = 1, => bucket_index = 0 sampled_address = 2, => a = 2, => bucket_index = 1 sampled_address = 3, => a = 3, => bucket_index = 1 sampled_address = 4, => a = 4, => bucket_index = 2 sampled_address = 5, => a = 5, => bucket_index = 2 Change-Id: Ia9fa0e4d9c7183e3e9d7ceaf73e63729f07aa2ce Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1607 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13target: Make profiling function more readableHsiangkai Wang1-10/+10
Change variable name 'length' to 'numBuckets'. It is more readable. Change-Id: I913cba0746f887adf6da401a46cd5e9ea88d2c6d Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1606 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: refine nds32_v2 implementHsiangkai Wang2-13/+36
Change-Id: I6e26ffbdcd426a15b34bff022964946f613f318c Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1569 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13aice: support batch commandsHsiangkai Wang6-76/+420
Change-Id: I6846362d98374c93f45f339fb1279fc71721e696 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1584 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13aice: Always setup SDP basic modeHsiangkai Wang1-26/+37
Change-Id: I1c0c11c2b9097b25324da0591edf036af207dbe9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1567 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13aice: use keep_alive() to avoid timeout warning messagesHsiangkai Wang1-0/+3
As polling $dbger, call keep_alive() to avoid timeout messages. Change-Id: Ia03d90535c2bd6049763209194c21f70fd8b7e8b Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1566 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13gdb_server: Do not set gdb_con->sync to true for new connectionsAnton Kolesov1-1/+1
In GDB connected to OpenOCD there is a command "monitor gdb_sync" which makes next stepi command to be ignored while GDB still will get an updated target state. This command sets gdb_connection->sync field to true to notify that stepi should be ignored. This field is set to true for all new connection and is set to false after first "continue" command. However if first resume command is stepi/nexti then it will be ignored and result will confuse GDB client, it will report that target received signal SIGINT. This patch sets this field to false for new connections, thus stepi/nexti will work properly when it is a first resume command. Change-Id: I7c9ebd69c3dc35f3e316041aa99f4e9d3425c0b6 Signed-off-by: Anton Kolesov <akolesov@synopsys.com> Reviewed-on: http://openocd.zylin.com/1587 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-13svf: off-by-one error; do not access after the allocated memoryPaul Fertser1-2/+3
Keep the promise and ensure there're at least 3 bytes available after the current position. This eliminates the errors reported by Valgrind. Change-Id: I1d0640e904c750eed808b2b4caf419b4d7619845 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1615 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-09-13target: Rewrite read/write buffer default implementationsAndreas Fritiofson1-88/+51
Rewrite the target_*_buffer_default to generate as large accesses as possible while maintaining natural alignment. These versions are easy to extend to generate 8-byte accesses to support 64-bit targets, although it requires some conformity from all target implementations (i.e. they need to refuse unsupported access sizes with some defined error code, so we can try again with a smaller one). Change-Id: I00ddcbb1d2fd33f9f8b99cb448cc93505a2421fc Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1221 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.1 at 2024-11-08 02:35:18 +0000