diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index fb1610d..53730ea 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -6824,16 +6824,23 @@ nor is Chip Erase (only Sector Erase is implemented).} @deffn {Flash Driver} {kinetis} @cindex kinetis -Kx, KLx, KVx and KE1x members of the Kinetis microcontroller family -from NXP (former Freescale) include -internal flash and use ARM Cortex-M0+ or M4 cores. The driver automatically +Several microcontrollers from NXP (former Freescale), including +Kx, KLx, KVx and KE1x members of the Kinetis family, +and S32K11x/S32K14x microcontrollers, include +internal flash and use ARM Cortex-M0+ or M4 cores. +Kinetis and S32K1 families use incompatible +identification registers, so the driver assumes Kinetis and requires +a driver option to indicate S32K1 is to be used. +Within the familiy, the driver automatically recognizes flash size and a number of flash banks (1-4) using the chip identification register, and autoconfigures itself. Use kinetis_ke driver for KE0x and KEAx devices. The @var{kinetis} driver defines option: @itemize -@item -sim-base @var{addr} ... base of System Integration Module where chip identification resides. Driver tries two known locations if option is omitted. +@item -s32k select S32K11x/S32K14x microcontroller flash support. + +@item -sim-base @var{addr} ... base of System Integration Module where chip identification resides. Driver tries known locations if option is omitted. @end itemize @example @@ -6882,6 +6889,7 @@ command completes. @deffn {Command} {kinetis nvm_partition} For FlexNVM devices only (KxxDX and KxxFX). +Not supported (yet) on S32K1 devices. Command shows or sets data flash or EEPROM backup size in kilobytes, sets two EEPROM blocks sizes in bytes and enables/disables loading of EEPROM contents to FlexRAM during reset. |