diff options
| -rw-r--r-- | NEWS | 205 | ||||
| -rw-r--r-- | NEWS-0.11.0 | 238 | ||||
| -rw-r--r-- | configure.ac | 2 |
3 files changed, 240 insertions, 205 deletions
@@ -2,232 +2,29 @@ This file includes highlights of the changes made in the OpenOCD source archive release. JTAG Layer: - * add debug level 4 for verbose I/O debug - * bitbang, add read buffer to improve performance - * Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver - * CMSIS-DAP v2 (USB bulk based) adapter driver - * Cypress KitProg adapter driver - * FTDI FT232R sync bitbang adapter driver - * Linux GPIOD bitbang adapter driver through libgpiod - * Mellanox rshim USB or PCIe adapter driver - * Nuvoton Nu-Link and Nu-Link2 adapter drivers - * NXP IMX GPIO mmap based adapter driver - * ST-Link consolidate all versions in single config - * ST-Link read properly old USB serial numbers - * STLink/V3 support (for ST devices only !) - * STM8 SWIM transport - * TI XDS110 adapter driver - * Xilinx XVC/PCIe adapter driver Boundary Scan: Target Layer: - * 64 bit address support - * ARCv2 target support - * ARM Cortex-A hypervisor mode support - * ARM Cortex-M fast PC sampling support for profiling - * ARM generic CTI support - * ARM generic mem-ap target support - * ARMv7-A MMU tools - * ARMv7m traces add TCP stream server - * ARMv8 AARCH64 target support and semihosting support - * ARMv8 AARCH64 disassembler support through capstone library - * ARMv8-M target support - * EnSilica eSi-RISC target support, including instruction tracing - eSi-Trace support - * MIPS64 target support - * Motorola SREC S6 record image file support - * RISC-V target support - * SEGGER Real Time Transfer (RTT) initial support (for single target, - Cortex-M only) - * ST STM8 target support - * Various MIPS32 target improvements Flash Layer: - * Atheros (ath79) SPI interface support - * Atmel atmega128rfa1 support - * Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support - * Atmel SAMC2?N* support - * Cypress PSoC5LP, PSoC6 support - * EnSilica eSi-RISC support - * Foshan Synwit Tech SWM050 support - * Maxim Integrated MAX32XXX support - * Nordic Semiconductor nRF51822, nRF52810, nRF52832 support - * NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support - * Renesas RPC HF support - * SH QSPI support - * SiFive Freedom E support - * Silicon Labs EFR-family, EZR32HG support - * ST BlueNRG support - * ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM - * ST STM32F72x, STM32F4x3, STM32H7xx support - * ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support - * ST STM32L5x support (non secure mode) - * TI CC13xx, CC26xx, CC32xx support - * TI MSP432 support - * Winner Micro w600 support - * Xilinx XCF platform support - * Various discrete SPI NOR flashes support Board, Target, and Interface Configuration Scripts: - * 8devices LIMA board config - * Achilles Instant-Development Kit Arria 10 board config - * Amazon Kindle 2 and DX board config - * Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config - * Andes Technology ADP-XC7KFF676 board config - * Andes Technology Corvette-F1 board config - * ARM Musca A board config - * Arty Spartan 7 FPGA board config - * Atmel SAMD10 Xplained mini board config - * Atmel SAMD11 Xplained Pro board config - * Atmel SAM G55 Xplained Pro board config - * AVNET UltraZED EG StarterKit board config - * Blue Pill STM32F103C8 board config - * DP Busblaster v4.1a board config - * DPTechnics DPT-Board-v1 board config - * Emcraft imx8 SOM BSB board config - * Globalscale ESPRESSObin board config - * Kasli board config - * Kintex Ultrascale XCKU040 board config - * Knovative KC-100 board config - * LeMaker HiKey board config - * Microchip (Atmel) SAME54 Xplained Pro board config - * Microchip (Atmel) SAML11 Xplained Pro board config - * Nordic module NRF52 board config - * Numato Lab Mimas A7 board config - * NXP Freedom FRDM-LS1012A board config - * NXP IMX7SABRE board config - * NXP IMX8MP-EVK board config - * NXP MC-IMX8M-EVK board config - * QuickLogic QuickFeather board config - * Renesas R-Car E2, H2, M2 board config - * Renesas R-Car Salvator-X(S) board config - * Renesas RZ/A1H GR-Peach board config - * Rigado BMD-300 board config - * Sayma AMC board config - * Sifive e31arty, e51arty, hifive1 board config - * ST B-L475E-IOT01A board config - * ST BlueNRG idb007v1, idb008v1, idb011v1 board config - * ST STM32F412g discovery board config - * ST STM32F413h discovery board config - * ST STM32F469i discovery board config - * ST STM32F7 Nucleo board config - * ST STM32F723e discovery board config - * ST STM32F746g discovery board config - * ST STM32F769i discovery board config - * ST STM32H735g discovery board config - * ST STM32H743zi Nucleo board config - * ST STM32H745i discovery board config - * ST STM32H747i discovery board config - * ST STM32H750b discovery board config - * ST STM32H7b3i discovery board config - * ST STM32H7x_dual_qspi board config - * ST STM32H7x3i Eval boards config - * ST STM32L073 Nucleo board config - * ST STM32L476g discovery board config - * ST STM32L496g discovery board config - * ST STM32L4p5g discovery board config - * ST STM32L4r9i discovery board config - * ST STM32L5 Nucleo board config - * ST STM32MP15x DK2 board config - * ST STM32WB Nucleo board config - * ST STM8L152R8 Nucleo board config - * Synopsys DesignWare ARC EM board config - * Synopsys DesignWare ARC HSDK board config - * TI BeagleBone family boards config - * TI CC13xx, CC26xx, CC32xx LaunchPad board config - * TI MSP432 LaunchPad board config - * Tocoding Poplar board config - * TP-Link WDR4300 board config - * Allwinner V3s target config - * Andes Technology NDS V5 target config - * Atmel atmega128rfa1 target config - * ARM corelink SSE-200 target config - * Atheros_ar9344 target config - * Cypress PSoC5LP, PSoC6 target config - * EnSilica eSi-RISC target config - * Foshan Synwit Tech SWM050 target config - * GigaDevice GD32VF103 target config - * Hisilicon Hi3798 target config - * Hisilicon Hi6220 target config - * Infineon TLE987x target config - * Marvell Armada 3700 target config - * Maxim Integrated MAX32XXX target config - * Mellanox BlueField target config - * Microchip (Atmel) SAME5x, SAML1x target config - * NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config - * NXP Kinetis KE1xZ, KE1xF target config - * NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config - * Qualcomm QCA4531 target config - * QuickLogic EOS S3 target config - * Renesas R-Car E2, H2, M2 target config - * Renesas R-Car Gen3 target config - * Renesas RZ/A1H target config - * Rockchip RK3308 target config - * ST BlueNRG target config - * ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config - * ST STM32MP15x target config - * ST STM32WBx, STM32WLEx target config - * ST STM8L152, S003, S103, S105 target config - * Synopsys DesignWare ARC EM target config - * Synopsys DesignWare ARC HS Development Kit SoC target config - * TI CC13xx, CC26xx, CC32xx target config - * TI TNETC4401 target config - * Xilinx UltraScale+ target config - * Altera 5M570Z (MAXV family) CPLD config - * Xilinx Ultrascale, XCF CPLD config - * Intel (Altera) Arria10 FPGA config - * Cadence SystemVerilog Direct Programming Interface (DPI) interface config - * Cypress KitProg interface config - * Digilent SMT2 NC interface config - * DLN-2 example of Linux GPIOD interface config - * FTDI C232HM interface config - * HIE JTAG Debugger interface config - * In-Circuit's ICprog interface config - * isodebug isolated JTAG/SWD+UART interface config - * Mellanox rshim USB or PCIe interface config - * Nuvoton Nu-Link interface config - * NXP IMX GPIO mmap based interface config - * Steppenprobe open hardware interface config - * TI XDS110 interface config Server Layer: - * 64 bit address support - * default bind to IPv4 localhost - * gdb: allow multiple connections - * gdb: architecture element support - * gdb: vCont, vRun support - * telnet: handle Ctrl+A, Ctrl+E and Ctrl+K RTOS: - * Chromium-EC rtos support - * hwthread pseudo rtos support - * NuttX rtos support - * RIOT rtos support Documentation: - * Improve STM32 flash driver - * Various typo fix and improvements Build and Release: - * Add libutil to support jimtcl version 0.80 - * Clang warning fixes - * GitHub workflow for Win32 snapshot binaries - * Handle Tcl return values consistently - * Mitigation for CVE-2018-5704: Prevent some forms of Cross - Protocol Scripting attacks - * Support for libftdi 1.5 - * Travis-CI basic support - * Update libjaylink to version 0.2.0 - * Update jimtcl to version 0.79 - * Use external (optional) library capstone for ARM and AARCH64 disassembly This release also contains a number of other important functional and cosmetic bugfixes. For more details about what has changed since the last release, see the git repository history: -http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path= +http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path= For older NEWS, see the NEWS files associated with each release diff --git a/NEWS-0.11.0 b/NEWS-0.11.0 new file mode 100644 index 0000000..4542aa2 --- /dev/null +++ b/NEWS-0.11.0 @@ -0,0 +1,238 @@ +This file includes highlights of the changes made in the OpenOCD +source archive release. + +JTAG Layer: + * add debug level 4 for verbose I/O debug + * bitbang, add read buffer to improve performance + * Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver + * CMSIS-DAP v2 (USB bulk based) adapter driver + * Cypress KitProg adapter driver + * FTDI FT232R sync bitbang adapter driver + * Linux GPIOD bitbang adapter driver through libgpiod + * Mellanox rshim USB or PCIe adapter driver + * Nuvoton Nu-Link and Nu-Link2 adapter drivers + * NXP IMX GPIO mmap based adapter driver + * ST-Link consolidate all versions in single config + * ST-Link read properly old USB serial numbers + * STLink/V3 support (for ST devices only !) + * STM8 SWIM transport + * TI XDS110 adapter driver + * Xilinx XVC/PCIe adapter driver + +Boundary Scan: + +Target Layer: + * 64 bit address support + * ARCv2 target support + * ARM Cortex-A hypervisor mode support + * ARM Cortex-M fast PC sampling support for profiling + * ARM generic CTI support + * ARM generic mem-ap target support + * ARMv7-A MMU tools + * ARMv7m traces add TCP stream server + * ARMv8 AARCH64 target support and semihosting support + * ARMv8 AARCH64 disassembler support through capstone library + * ARMv8-M target support + * EnSilica eSi-RISC target support, including instruction tracing + eSi-Trace support + * MIPS64 target support + * Motorola SREC S6 record image file support + * RISC-V target support + * SEGGER Real Time Transfer (RTT) initial support (for single target, + Cortex-M only) + * ST STM8 target support + * Various MIPS32 target improvements + +Flash Layer: + * Atheros (ath79) SPI interface support + * Atmel atmega128rfa1 support + * Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support + * Atmel SAMC2?N* support + * Cypress PSoC5LP, PSoC6 support + * EnSilica eSi-RISC support + * Foshan Synwit Tech SWM050 support + * Maxim Integrated MAX32XXX support + * Nordic Semiconductor nRF51822, nRF52810, nRF52832 support + * NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support + * Renesas RPC HF support + * SH QSPI support + * SiFive Freedom E support + * Silicon Labs EFR-family, EZR32HG support + * ST BlueNRG support + * ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM + * ST STM32F72x, STM32F4x3, STM32H7xx support + * ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support + * ST STM32L5x support (non secure mode) + * TI CC13xx, CC26xx, CC32xx support + * TI MSP432 support + * Winner Micro w600 support + * Xilinx XCF platform support + * Various discrete SPI NOR flashes support + +Board, Target, and Interface Configuration Scripts: + * 8devices LIMA board config + * Achilles Instant-Development Kit Arria 10 board config + * Amazon Kindle 2 and DX board config + * Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config + * Andes Technology ADP-XC7KFF676 board config + * Andes Technology Corvette-F1 board config + * ARM Musca A board config + * Arty Spartan 7 FPGA board config + * Atmel SAMD10 Xplained mini board config + * Atmel SAMD11 Xplained Pro board config + * Atmel SAM G55 Xplained Pro board config + * AVNET UltraZED EG StarterKit board config + * Blue Pill STM32F103C8 board config + * DP Busblaster v4.1a board config + * DPTechnics DPT-Board-v1 board config + * Emcraft imx8 SOM BSB board config + * Globalscale ESPRESSObin board config + * Kasli board config + * Kintex Ultrascale XCKU040 board config + * Knovative KC-100 board config + * LeMaker HiKey board config + * Microchip (Atmel) SAME54 Xplained Pro board config + * Microchip (Atmel) SAML11 Xplained Pro board config + * Nordic module NRF52 board config + * Numato Lab Mimas A7 board config + * NXP Freedom FRDM-LS1012A board config + * NXP IMX7SABRE board config + * NXP IMX8MP-EVK board config + * NXP MC-IMX8M-EVK board config + * QuickLogic QuickFeather board config + * Renesas R-Car E2, H2, M2 board config + * Renesas R-Car Salvator-X(S) board config + * Renesas RZ/A1H GR-Peach board config + * Rigado BMD-300 board config + * Sayma AMC board config + * Sifive e31arty, e51arty, hifive1 board config + * ST B-L475E-IOT01A board config + * ST BlueNRG idb007v1, idb008v1, idb011v1 board config + * ST STM32F412g discovery board config + * ST STM32F413h discovery board config + * ST STM32F469i discovery board config + * ST STM32F7 Nucleo board config + * ST STM32F723e discovery board config + * ST STM32F746g discovery board config + * ST STM32F769i discovery board config + * ST STM32H735g discovery board config + * ST STM32H743zi Nucleo board config + * ST STM32H745i discovery board config + * ST STM32H747i discovery board config + * ST STM32H750b discovery board config + * ST STM32H7b3i discovery board config + * ST STM32H7x_dual_qspi board config + * ST STM32H7x3i Eval boards config + * ST STM32L073 Nucleo board config + * ST STM32L476g discovery board config + * ST STM32L496g discovery board config + * ST STM32L4p5g discovery board config + * ST STM32L4r9i discovery board config + * ST STM32L5 Nucleo board config + * ST STM32MP15x DK2 board config + * ST STM32WB Nucleo board config + * ST STM8L152R8 Nucleo board config + * Synopsys DesignWare ARC EM board config + * Synopsys DesignWare ARC HSDK board config + * TI BeagleBone family boards config + * TI CC13xx, CC26xx, CC32xx LaunchPad board config + * TI MSP432 LaunchPad board config + * Tocoding Poplar board config + * TP-Link WDR4300 board config + * Allwinner V3s target config + * Andes Technology NDS V5 target config + * Atmel atmega128rfa1 target config + * ARM corelink SSE-200 target config + * Atheros_ar9344 target config + * Cypress PSoC5LP, PSoC6 target config + * EnSilica eSi-RISC target config + * Foshan Synwit Tech SWM050 target config + * GigaDevice GD32VF103 target config + * Hisilicon Hi3798 target config + * Hisilicon Hi6220 target config + * Infineon TLE987x target config + * Marvell Armada 3700 target config + * Maxim Integrated MAX32XXX target config + * Mellanox BlueField target config + * Microchip (Atmel) SAME5x, SAML1x target config + * NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config + * NXP Kinetis KE1xZ, KE1xF target config + * NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config + * Qualcomm QCA4531 target config + * QuickLogic EOS S3 target config + * Renesas R-Car E2, H2, M2 target config + * Renesas R-Car Gen3 target config + * Renesas RZ/A1H target config + * Rockchip RK3308 target config + * ST BlueNRG target config + * ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config + * ST STM32MP15x target config + * ST STM32WBx, STM32WLEx target config + * ST STM8L152, S003, S103, S105 target config + * Synopsys DesignWare ARC EM target config + * Synopsys DesignWare ARC HS Development Kit SoC target config + * TI CC13xx, CC26xx, CC32xx target config + * TI TNETC4401 target config + * Xilinx UltraScale+ target config + * Altera 5M570Z (MAXV family) CPLD config + * Xilinx Ultrascale, XCF CPLD config + * Intel (Altera) Arria10 FPGA config + * Cadence SystemVerilog Direct Programming Interface (DPI) interface config + * Cypress KitProg interface config + * Digilent SMT2 NC interface config + * DLN-2 example of Linux GPIOD interface config + * FTDI C232HM interface config + * HIE JTAG Debugger interface config + * In-Circuit's ICprog interface config + * isodebug isolated JTAG/SWD+UART interface config + * Mellanox rshim USB or PCIe interface config + * Nuvoton Nu-Link interface config + * NXP IMX GPIO mmap based interface config + * Steppenprobe open hardware interface config + * TI XDS110 interface config + +Server Layer: + * 64 bit address support + * default bind to IPv4 localhost + * gdb: allow multiple connections + * gdb: architecture element support + * gdb: vCont, vRun support + * telnet: handle Ctrl+A, Ctrl+E and Ctrl+K + +RTOS: + * Chromium-EC rtos support + * hwthread pseudo rtos support + * NuttX rtos support + * RIOT rtos support + +Documentation: + * Improve STM32 flash driver + * Various typo fix and improvements + +Build and Release: + * Add libutil to support jimtcl version 0.80 + * Clang warning fixes + * GitHub workflow for Win32 snapshot binaries + * Handle Tcl return values consistently + * Mitigation for CVE-2018-5704: Prevent some forms of Cross + Protocol Scripting attacks + * Support for libftdi 1.5 + * Travis-CI basic support + * Update libjaylink to version 0.2.0 + * Update jimtcl to version 0.79 + * Use external (optional) library capstone for ARM and AARCH64 disassembly + + +This release also contains a number of other important functional and +cosmetic bugfixes. For more details about what has changed since the +last release, see the git repository history: + +http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path= + + +For older NEWS, see the NEWS files associated with each release +(i.e. NEWS-<version>). + +For more information about contributing test reports, bug fixes, or new +features and device support, please read the new Developer Manual (or +the BUGS and PATCHES.txt files in the source archive). diff --git a/configure.ac b/configure.ac index a5c9c92..a74f319 100644 --- a/configure.ac +++ b/configure.ac @@ -1,5 +1,5 @@ AC_PREREQ(2.64) -AC_INIT([openocd], [0.11.0], +AC_INIT([openocd], [0.11.0+dev], [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>]) AC_CONFIG_SRCDIR([src/openocd.c]) AC_CONFIG_AUX_DIR([.]) |