diff options
Diffstat (limited to 'softfloat/softfloat.h')
-rw-r--r-- | softfloat/softfloat.h | 259 |
1 files changed, 7 insertions, 252 deletions
diff --git a/softfloat/softfloat.h b/softfloat/softfloat.h index eb5303a..fc3f9dc 100644 --- a/softfloat/softfloat.h +++ b/softfloat/softfloat.h @@ -1,259 +1,14 @@ - -/*============================================================================ - -This C header file is part of the SoftFloat IEC/IEEE Floating-point Arithmetic -Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -/*---------------------------------------------------------------------------- -| The macro `FLOATX80' must be defined to enable the extended double-precision -| floating-point format `floatx80'. If this macro is not defined, the -| `floatx80' type will not be defined, and none of the functions that either -| input or output the `floatx80' type will be defined. The same applies to -| the `FLOAT128' macro and the quadruple-precision format `float128'. -*----------------------------------------------------------------------------*/ -#define FLOATX80 -#define FLOAT128 - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE floating-point types. -*----------------------------------------------------------------------------*/ -typedef unsigned int float32; -typedef unsigned long long float64; -#ifdef FLOATX80 -typedef struct { - unsigned short high; - unsigned long long low; -} floatx80; -#endif -#ifdef FLOAT128 -typedef struct { - unsigned long long high, low; -} float128; -#endif - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE floating-point underflow tininess-detection mode. -*----------------------------------------------------------------------------*/ -extern int float_detect_tininess; -enum { - float_tininess_after_rounding = 0, - float_tininess_before_rounding = 1 -}; - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE floating-point rounding mode. -*----------------------------------------------------------------------------*/ -extern int float_rounding_mode; -enum { - float_round_nearest_even = 0, - float_round_to_zero = 1, - float_round_up = 2, - float_round_down = 3 -}; - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE floating-point exception flags. -*----------------------------------------------------------------------------*/ -extern int float_exception_flags; -enum { - float_flag_inexact = 1, - float_flag_divbyzero = 2, - float_flag_underflow = 4, - float_flag_overflow = 8, - float_flag_invalid = 16 -}; - -/*---------------------------------------------------------------------------- -| Routine to raise any or all of the software IEC/IEEE floating-point -| exception flags. -*----------------------------------------------------------------------------*/ -void float_raise( int ); - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE integer-to-floating-point conversion routines. -*----------------------------------------------------------------------------*/ -float32 int32_to_float32( int ); -float64 int32_to_float64( int ); -#ifdef FLOATX80 -floatx80 int32_to_floatx80( int ); -#endif -#ifdef FLOAT128 -float128 int32_to_float128( int ); -#endif -float32 int64_to_float32( long long ); -float64 int64_to_float64( long long ); -#ifdef FLOATX80 -floatx80 int64_to_floatx80( long long ); -#endif -#ifdef FLOAT128 -float128 int64_to_float128( long long ); +#ifdef __cplusplus +extern "C" { #endif -/*---------------------------------------------------------------------------- -| Software IEC/IEEE single-precision conversion routines. -*----------------------------------------------------------------------------*/ -int float32_to_int32( float32 ); -int float32_to_int32_round_to_zero( float32 ); -long long float32_to_int64( float32 ); -long long float32_to_int64_round_to_zero( float32 ); -float64 float32_to_float64( float32 ); -#ifdef FLOATX80 -floatx80 float32_to_floatx80( float32 ); -#endif -#ifdef FLOAT128 -float128 float32_to_float128( float32 ); -#endif +#ifndef _SOFTFLOAT_H +#define _SOFTFLOAT_H -/*---------------------------------------------------------------------------- -| Software IEC/IEEE single-precision operations. -*----------------------------------------------------------------------------*/ -float32 float32_round_to_int( float32 ); -float32 float32_add( float32, float32 ); -float32 float32_sub( float32, float32 ); -float32 float32_mul( float32, float32 ); -float32 float32_div( float32, float32 ); -float32 float32_rem( float32, float32 ); -float32 float32_sqrt( float32 ); -int float32_eq( float32, float32 ); -int float32_le( float32, float32 ); -int float32_lt( float32, float32 ); -int float32_eq_signaling( float32, float32 ); -int float32_le_quiet( float32, float32 ); -int float32_lt_quiet( float32, float32 ); -int float32_is_signaling_nan( float32 ); +#include "softfloat-header" -/*---------------------------------------------------------------------------- -| Software IEC/IEEE double-precision conversion routines. -*----------------------------------------------------------------------------*/ -int float64_to_int32( float64 ); -int float64_to_int32_round_to_zero( float64 ); -long long float64_to_int64( float64 ); -long long float64_to_int64_round_to_zero( float64 ); -float32 float64_to_float32( float64 ); -#ifdef FLOATX80 -floatx80 float64_to_floatx80( float64 ); #endif -#ifdef FLOAT128 -float128 float64_to_float128( float64 ); -#endif - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE double-precision operations. -*----------------------------------------------------------------------------*/ -float64 float64_round_to_int( float64 ); -float64 float64_add( float64, float64 ); -float64 float64_sub( float64, float64 ); -float64 float64_mul( float64, float64 ); -float64 float64_div( float64, float64 ); -float64 float64_rem( float64, float64 ); -float64 float64_sqrt( float64 ); -int float64_eq( float64, float64 ); -int float64_le( float64, float64 ); -int float64_lt( float64, float64 ); -int float64_eq_signaling( float64, float64 ); -int float64_le_quiet( float64, float64 ); -int float64_lt_quiet( float64, float64 ); -int float64_is_signaling_nan( float64 ); -#ifdef FLOATX80 - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE extended double-precision conversion routines. -*----------------------------------------------------------------------------*/ -int floatx80_to_int32( floatx80 ); -int floatx80_to_int32_round_to_zero( floatx80 ); -long long floatx80_to_int64( floatx80 ); -long long floatx80_to_int64_round_to_zero( floatx80 ); -float32 floatx80_to_float32( floatx80 ); -float64 floatx80_to_float64( floatx80 ); -#ifdef FLOAT128 -float128 floatx80_to_float128( floatx80 ); +#ifdef __cplusplus +} #endif - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE extended double-precision rounding precision. Valid -| values are 32, 64, and 80. -*----------------------------------------------------------------------------*/ -extern int floatx80_rounding_precision; - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE extended double-precision operations. -*----------------------------------------------------------------------------*/ -floatx80 floatx80_round_to_int( floatx80 ); -floatx80 floatx80_add( floatx80, floatx80 ); -floatx80 floatx80_sub( floatx80, floatx80 ); -floatx80 floatx80_mul( floatx80, floatx80 ); -floatx80 floatx80_div( floatx80, floatx80 ); -floatx80 floatx80_rem( floatx80, floatx80 ); -floatx80 floatx80_sqrt( floatx80 ); -int floatx80_eq( floatx80, floatx80 ); -int floatx80_le( floatx80, floatx80 ); -int floatx80_lt( floatx80, floatx80 ); -int floatx80_eq_signaling( floatx80, floatx80 ); -int floatx80_le_quiet( floatx80, floatx80 ); -int floatx80_lt_quiet( floatx80, floatx80 ); -int floatx80_is_signaling_nan( floatx80 ); - -#endif - -#ifdef FLOAT128 - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE quadruple-precision conversion routines. -*----------------------------------------------------------------------------*/ -int float128_to_int32( float128 ); -int float128_to_int32_round_to_zero( float128 ); -long long float128_to_int64( float128 ); -long long float128_to_int64_round_to_zero( float128 ); -float32 float128_to_float32( float128 ); -float64 float128_to_float64( float128 ); -#ifdef FLOATX80 -floatx80 float128_to_floatx80( float128 ); -#endif - -/*---------------------------------------------------------------------------- -| Software IEC/IEEE quadruple-precision operations. -*----------------------------------------------------------------------------*/ -float128 float128_round_to_int( float128 ); -float128 float128_add( float128, float128 ); -float128 float128_sub( float128, float128 ); -float128 float128_mul( float128, float128 ); -float128 float128_div( float128, float128 ); -float128 float128_rem( float128, float128 ); -float128 float128_sqrt( float128 ); -int float128_eq( float128, float128 ); -int float128_le( float128, float128 ); -int float128_lt( float128, float128 ); -int float128_eq_signaling( float128, float128 ); -int float128_le_quiet( float128, float128 ); -int float128_lt_quiet( float128, float128 ); -int float128_is_signaling_nan( float128 ); - -#endif - |