1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
|
// SPDX-License-Identifier: Apache-2.0
/*
* Support for OpenCAPI on POWER9 NPUs
*
* This file provides support for OpenCAPI as implemented on POWER9.
*
* At present, we initialise the NPU separately from the NVLink code in npu2.c.
* As such, we don't currently support mixed NVLink and OpenCAPI configurations
* on the same NPU for machines such as Witherspoon.
*
* Procedure references in this file are to the POWER9 OpenCAPI NPU Workbook
* (IBM internal document).
*
* TODO:
* - Support for mixed NVLink and OpenCAPI on the same NPU
* - Support for link ganging (one AFU using multiple links)
* - Link reset and error handling
* - Presence detection
* - Consume HDAT NPU information
* - LPC Memory support
*
* Copyright 2013-2019 IBM Corp.
*/
#include <skiboot.h>
#include <xscom.h>
#include <io.h>
#include <timebase.h>
#include <pci.h>
#include <pci-cfg.h>
#include <pci-slot.h>
#include <interrupts.h>
#include <opal.h>
#include <opal-api.h>
#include <npu2.h>
#include <npu2-regs.h>
#include <phys-map.h>
#include <i2c.h>
#include <nvram.h>
#define NPU_IRQ_LEVELS_XSL 23
#define MAX_PE_HANDLE ((1 << 15) - 1)
#define TL_MAX_TEMPLATE 63
#define TL_RATE_BUF_SIZE 32
#define OCAPI_SLOT_NORMAL PCI_SLOT_STATE_NORMAL
#define OCAPI_SLOT_LINK PCI_SLOT_STATE_LINK
#define OCAPI_SLOT_LINK_START (OCAPI_SLOT_LINK + 1)
#define OCAPI_SLOT_LINK_WAIT (OCAPI_SLOT_LINK + 2)
#define OCAPI_SLOT_LINK_TRAINED (OCAPI_SLOT_LINK + 3)
#define OCAPI_SLOT_FRESET PCI_SLOT_STATE_FRESET
#define OCAPI_SLOT_FRESET_START (OCAPI_SLOT_FRESET + 1)
#define OCAPI_SLOT_FRESET_INIT (OCAPI_SLOT_FRESET + 2)
#define OCAPI_SLOT_FRESET_ASSERT_DELAY (OCAPI_SLOT_FRESET + 3)
#define OCAPI_SLOT_FRESET_DEASSERT_DELAY (OCAPI_SLOT_FRESET + 4)
#define OCAPI_SLOT_FRESET_INIT_DELAY (OCAPI_SLOT_FRESET + 5)
#define OCAPI_LINK_TRAINING_RETRIES 2
#define OCAPI_LINK_TRAINING_TIMEOUT 3000 /* ms */
#define OCAPI_LINK_STATE_TRAINED 0x7
enum npu2_link_training_state {
NPU2_TRAIN_DEFAULT, /* fully train the link */
NPU2_TRAIN_PRBS31, /* used for Signal Integrity testing */
NPU2_TRAIN_NONE, /* used for testing with loopback cable */
};
static enum npu2_link_training_state npu2_ocapi_training_state = NPU2_TRAIN_DEFAULT;
static const struct phb_ops npu2_opencapi_ops;
static inline uint64_t index_to_stack(uint64_t index) {
switch (index) {
case 2:
case 3:
return NPU2_STACK_STCK_1;
break;
case 4:
case 5:
return NPU2_STACK_STCK_2;
break;
default:
assert(false);
}
}
static inline uint64_t index_to_stacku(uint64_t index) {
switch (index) {
case 2:
case 3:
return NPU2_STACK_STCK_1U;
break;
case 4:
case 5:
return NPU2_STACK_STCK_2U;
break;
default:
assert(false);
}
}
static inline uint64_t index_to_block(uint64_t index) {
switch (index) {
case 2:
case 4:
return NPU2_BLOCK_OTL0;
break;
case 3:
case 5:
return NPU2_BLOCK_OTL1;
break;
default:
assert(false);
}
}
static uint64_t get_odl_status(uint32_t gcid, uint64_t index)
{
uint64_t reg, status_xscom;
status_xscom = OB_ODL_STATUS(index);
xscom_read(gcid, status_xscom, ®);
return reg;
}
static uint64_t get_odl_training_status(uint32_t gcid, uint64_t index)
{
uint64_t status_xscom, reg;
status_xscom = OB_ODL_TRAINING_STATUS(index);
xscom_read(gcid, status_xscom, ®);
return reg;
}
static uint64_t get_odl_endpoint_info(uint32_t gcid, uint64_t index)
{
uint64_t status_xscom, reg;
status_xscom = OB_ODL_ENDPOINT_INFO(index);
xscom_read(gcid, status_xscom, ®);
return reg;
}
static void disable_nvlink(uint32_t gcid, int index)
{
uint64_t phy_config_scom, reg;
switch (index) {
case 2:
case 3:
phy_config_scom = OBUS_LL0_IOOL_PHY_CONFIG;
break;
case 4:
case 5:
phy_config_scom = OBUS_LL3_IOOL_PHY_CONFIG;
break;
default:
assert(false);
}
/* Disable NV-Link link layers */
xscom_read(gcid, phy_config_scom, ®);
reg &= ~OBUS_IOOL_PHY_CONFIG_NV0_NPU_ENABLED;
reg &= ~OBUS_IOOL_PHY_CONFIG_NV1_NPU_ENABLED;
reg &= ~OBUS_IOOL_PHY_CONFIG_NV2_NPU_ENABLED;
xscom_write(gcid, phy_config_scom, reg);
}
/* Procedure 13.1.3.1 - select OCAPI vs NVLink for bricks 2-3/4-5 */
static void set_transport_mux_controls(uint32_t gcid, uint32_t scom_base,
int index, enum npu2_dev_type type)
{
/* Step 1 - Set Transport MUX controls to select correct OTL or NTL */
uint64_t reg;
uint64_t field;
/* TODO: Rework this to select for NVLink too */
assert(type == NPU2_DEV_TYPE_OPENCAPI);
prlog(PR_DEBUG, "OCAPI: %s: Setting transport mux controls\n", __func__);
/* Optical IO Transport Mux Config for Bricks 0-2 and 4-5 */
reg = npu2_scom_read(gcid, scom_base, NPU2_MISC_OPTICAL_IO_CFG0,
NPU2_MISC_DA_LEN_8B);
switch (index) {
case 0:
case 1:
/* not valid for OpenCAPI */
assert(false);
break;
case 2: /* OTL1.0 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg);
field &= ~0b100;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg,
field);
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg);
field |= 0b10;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg,
field);
break;
case 3: /* OTL1.1 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg);
field &= ~0b010;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_NDLMUX_BRK0TO2, reg,
field);
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg);
field |= 0b01;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK0TO1, reg,
field);
break;
case 4: /* OTL2.0 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg);
field |= 0b10;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg,
field);
break;
case 5: /* OTL2.1 */
field = GETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg);
field |= 0b01;
reg = SETFIELD(NPU2_MISC_OPTICAL_IO_CFG0_OCMUX_BRK4TO5, reg,
field);
break;
default:
assert(false);
}
npu2_scom_write(gcid, scom_base, NPU2_MISC_OPTICAL_IO_CFG0,
NPU2_MISC_DA_LEN_8B, reg);
/*
* PowerBus Optical Miscellaneous Config Register - select
* OpenCAPI for b4/5 and A-Link for b3
*/
xscom_read(gcid, PU_IOE_PB_MISC_CFG, ®);
switch (index) {
case 0:
case 1:
case 2:
case 3:
break;
case 4:
reg = SETFIELD(PU_IOE_PB_MISC_CFG_SEL_04_NPU_NOT_PB, reg, 1);
break;
case 5:
reg = SETFIELD(PU_IOE_PB_MISC_CFG_SEL_05_NPU_NOT_PB, reg, 1);
break;
}
xscom_write(gcid, PU_IOE_PB_MISC_CFG, reg);
}
static void assert_odl_reset(uint32_t gcid, int index)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(index);
/* Reset ODL */
reg = OB_ODL_CONFIG_RESET;
reg = SETFIELD(OB_ODL_CONFIG_VERSION, reg, 0b000001);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b0110);
reg = SETFIELD(OB_ODL_CONFIG_SUPPORTED_MODES, reg, 0b0010);
reg |= OB_ODL_CONFIG_X4_BACKOFF_ENABLE;
reg = SETFIELD(OB_ODL_CONFIG_PHY_CNTR_LIMIT, reg, 0b1111);
reg |= OB_ODL_CONFIG_DEBUG_ENABLE;
reg = SETFIELD(OB_ODL_CONFIG_FWD_PROGRESS_TIMER, reg, 0b0110);
xscom_write(gcid, config_xscom, reg);
}
static void deassert_odl_reset(uint32_t gcid, int index)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(index);
xscom_read(gcid, config_xscom, ®);
reg &= ~OB_ODL_CONFIG_RESET;
xscom_write(gcid, config_xscom, reg);
}
static void enable_odl_phy_mux(uint32_t gcid, int index)
{
uint64_t reg;
uint64_t phy_config_scom;
prlog(PR_DEBUG, "OCAPI: %s: Enabling ODL to PHY MUXes\n", __func__);
/* Step 2 - Enable MUXes for ODL to PHY connection */
switch (index) {
case 2:
case 3:
phy_config_scom = OBUS_LL0_IOOL_PHY_CONFIG;
break;
case 4:
case 5:
phy_config_scom = OBUS_LL3_IOOL_PHY_CONFIG;
break;
default:
assert(false);
}
/*
* ODL must be in reset when enabling.
* It stays in reset until the link is trained
*/
assert_odl_reset(gcid, index);
/* PowerBus OLL PHY Training Config Register */
xscom_read(gcid, phy_config_scom, ®);
/*
* Enable ODL to use shared PHYs
*
* On obus3, OTL0 is connected to ODL1 (and OTL1 to ODL0), so
* even if it may look odd at first, we do want to enable ODL0
* for links 2 and 5
*/
switch (index) {
case 2:
case 5:
reg |= OBUS_IOOL_PHY_CONFIG_ODL0_ENABLED;
break;
case 3:
case 4:
reg |= OBUS_IOOL_PHY_CONFIG_ODL1_ENABLED;
break;
}
/*
* Based on the platform, we may have to activate an extra mux
* to connect the ODL to the right set of lanes.
*
* FIXME: to be checked once we have merged with nvlink
* code. Need to verify that it's a platform parameter and not
* slot-dependent
*/
if (platform.ocapi->odl_phy_swap)
reg |= OBUS_IOOL_PHY_CONFIG_ODL_PHY_SWAP;
else
reg &= ~OBUS_IOOL_PHY_CONFIG_ODL_PHY_SWAP;
/* Disable A-Link link layers */
reg &= ~OBUS_IOOL_PHY_CONFIG_LINK0_OLL_ENABLED;
reg &= ~OBUS_IOOL_PHY_CONFIG_LINK1_OLL_ENABLED;
xscom_write(gcid, phy_config_scom, reg);
}
static void disable_alink_fp(uint32_t gcid)
{
uint64_t reg = 0;
prlog(PR_DEBUG, "OCAPI: %s: Disabling A-Link framer/parsers\n", __func__);
/* Step 3 - Disable A-Link framers/parsers */
/* TODO: Confirm if needed on OPAL system */
reg |= PU_IOE_PB_FP_CFG_FP0_FMR_DISABLE;
reg |= PU_IOE_PB_FP_CFG_FP0_PRS_DISABLE;
reg |= PU_IOE_PB_FP_CFG_FP1_FMR_DISABLE;
reg |= PU_IOE_PB_FP_CFG_FP1_PRS_DISABLE;
xscom_write(gcid, PU_IOE_PB_FP01_CFG, reg);
xscom_write(gcid, PU_IOE_PB_FP23_CFG, reg);
xscom_write(gcid, PU_IOE_PB_FP45_CFG, reg);
xscom_write(gcid, PU_IOE_PB_FP67_CFG, reg);
}
static void enable_xsl_clocks(uint32_t gcid, uint32_t scom_base, int index)
{
/* Step 5 - Enable Clocks in XSL */
prlog(PR_DEBUG, "OCAPI: %s: Enable clocks in XSL\n", __func__);
npu2_scom_write(gcid, scom_base, NPU2_REG_OFFSET(index_to_stack(index),
NPU2_BLOCK_XSL,
NPU2_XSL_WRAP_CFG),
NPU2_MISC_DA_LEN_8B, NPU2_XSL_WRAP_CFG_XSLO_CLOCK_ENABLE);
}
#define CQ_CTL_STATUS_TIMEOUT 10 /* milliseconds */
static int set_fence_control(uint32_t gcid, uint32_t scom_base,
int index, uint8_t status)
{
int stack, block;
uint64_t reg, status_field;
uint8_t status_val;
uint64_t fence_control;
uint64_t timeout = mftb() + msecs_to_tb(CQ_CTL_STATUS_TIMEOUT);
stack = index_to_stack(index);
block = index_to_block(index);
fence_control = NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
block == NPU2_BLOCK_OTL0 ?
NPU2_CQ_CTL_FENCE_CONTROL_0 :
NPU2_CQ_CTL_FENCE_CONTROL_1);
reg = SETFIELD(NPU2_CQ_CTL_FENCE_CONTROL_REQUEST_FENCE, 0ull, status);
npu2_scom_write(gcid, scom_base, fence_control,
NPU2_MISC_DA_LEN_8B, reg);
/* Wait for fence status to update */
if (index_to_block(index) == NPU2_BLOCK_OTL0)
status_field = NPU2_CQ_CTL_STATUS_BRK0_AM_FENCED;
else
status_field = NPU2_CQ_CTL_STATUS_BRK1_AM_FENCED;
do {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(index_to_stack(index),
NPU2_BLOCK_CTL,
NPU2_CQ_CTL_STATUS),
NPU2_MISC_DA_LEN_8B);
status_val = GETFIELD(status_field, reg);
if (status_val == status)
return OPAL_SUCCESS;
time_wait_ms(1);
} while (tb_compare(mftb(), timeout) == TB_ABEFOREB);
/**
* @fwts-label OCAPIFenceStatusTimeout
* @fwts-advice The NPU fence status did not update as expected. This
* could be the result of a firmware or hardware bug. OpenCAPI
* functionality could be broken.
*/
prlog(PR_ERR,
"OCAPI: Fence status for brick %d stuck: expected 0x%x, got 0x%x\n",
index, status, status_val);
return OPAL_HARDWARE;
}
static void set_npcq_config(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg, stack, block;
prlog(PR_DEBUG, "OCAPI: %s: Set NPCQ Config\n", __func__);
/* Step 6 - Set NPCQ configuration */
/* CQ_CTL Misc Config Register #0 */
stack = index_to_stack(index);
block = index_to_block(index);
/* Enable OTL */
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG0(stack, block),
NPU2_MISC_DA_LEN_8B, NPU2_OTL_CONFIG0_EN);
set_fence_control(gcid, scom_base, index, 0b01);
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
NPU2_CQ_CTL_MISC_CFG),
NPU2_MISC_DA_LEN_8B);
/* Set OCAPI mode */
reg |= NPU2_CQ_CTL_MISC_CFG_CONFIG_OCAPI_MODE;
if (block == NPU2_BLOCK_OTL0)
reg |= NPU2_CQ_CTL_MISC_CFG_CONFIG_OTL0_ENABLE;
else
reg |= NPU2_CQ_CTL_MISC_CFG_CONFIG_OTL1_ENABLE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
NPU2_CQ_CTL_MISC_CFG),
NPU2_MISC_DA_LEN_8B, reg);
/* NPU Fenced */
set_fence_control(gcid, scom_base, index, 0b11);
/* NPU Half Fenced */
set_fence_control(gcid, scom_base, index, 0b10);
/* CQ_DAT Misc Config Register #1 */
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_DAT,
NPU2_CQ_DAT_MISC_CFG),
NPU2_MISC_DA_LEN_8B);
/* Set OCAPI mode for bricks 2-5 */
reg |= NPU2_CQ_DAT_MISC_CFG_CONFIG_OCAPI_MODE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_DAT,
NPU2_CQ_DAT_MISC_CFG),
NPU2_MISC_DA_LEN_8B, reg);
/* CQ_SM Misc Config Register #0 */
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B);
/* Set OCAPI mode for bricks 2-5 */
reg |= NPU2_CQ_SM_MISC_CFG0_CONFIG_OCAPI_MODE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B, reg);
}
}
static void enable_xsl_xts_interfaces(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg;
prlog(PR_DEBUG, "OCAPI: %s: Enable XSL-XTS Interfaces\n", __func__);
/* Step 7 - Enable XSL-XTS interfaces */
/* XTS Config Register - Enable XSL-XTS interface */
reg = npu2_scom_read(gcid, scom_base, NPU2_XTS_CFG, NPU2_MISC_DA_LEN_8B);
reg |= NPU2_XTS_CFG_OPENCAPI;
npu2_scom_write(gcid, scom_base, NPU2_XTS_CFG, NPU2_MISC_DA_LEN_8B, reg);
/* XTS Config2 Register - Enable XSL1/2 */
reg = npu2_scom_read(gcid, scom_base, NPU2_XTS_CFG2, NPU2_MISC_DA_LEN_8B);
switch (index_to_stack(index)) {
case NPU2_STACK_STCK_1:
reg |= NPU2_XTS_CFG2_XSL1_ENA;
break;
case NPU2_STACK_STCK_2:
reg |= NPU2_XTS_CFG2_XSL2_ENA;
break;
}
npu2_scom_write(gcid, scom_base, NPU2_XTS_CFG2, NPU2_MISC_DA_LEN_8B, reg);
}
static void enable_sm_allocation(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg, block;
int stack = index_to_stack(index);
prlog(PR_DEBUG, "OCAPI: %s: Enable State Machine Allocation\n", __func__);
/* Step 8 - Enable state-machine allocation */
/* Low-Water Marks Registers - Enable state machine allocation */
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_LOW_WATER_MARKS),
NPU2_MISC_DA_LEN_8B);
reg |= NPU2_LOW_WATER_MARKS_ENABLE_MACHINE_ALLOC;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_LOW_WATER_MARKS),
NPU2_MISC_DA_LEN_8B, reg);
}
}
static void enable_pb_snooping(uint32_t gcid, uint32_t scom_base, int index)
{
uint64_t reg, block;
int stack = index_to_stack(index);
prlog(PR_DEBUG, "OCAPI: %s: Enable PowerBus snooping\n", __func__);
/* Step 9 - Enable PowerBus snooping */
/* CQ_SM Misc Config Register #0 - Enable PowerBus snooping */
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B);
reg |= NPU2_CQ_SM_MISC_CFG0_CONFIG_ENABLE_PBUS;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, block,
NPU2_CQ_SM_MISC_CFG0),
NPU2_MISC_DA_LEN_8B, reg);
}
}
static void brick_config(uint32_t gcid, uint32_t scom_base, int index)
{
/*
* We assume at this point that the PowerBus Hotplug Mode Control
* register is correctly set by Hostboot
*/
disable_nvlink(gcid, index);
set_transport_mux_controls(gcid, scom_base, index,
NPU2_DEV_TYPE_OPENCAPI);
enable_odl_phy_mux(gcid, index);
disable_alink_fp(gcid);
enable_xsl_clocks(gcid, scom_base, index);
set_npcq_config(gcid, scom_base, index);
enable_xsl_xts_interfaces(gcid, scom_base, index);
enable_sm_allocation(gcid, scom_base, index);
enable_pb_snooping(gcid, scom_base, index);
}
/* Procedure 13.1.3.4 - Brick to PE Mapping */
static void pe_config(struct npu2_dev *dev)
{
/* We currently use a fixed PE assignment per brick */
uint64_t val, reg;
val = NPU2_MISC_BRICK_BDF2PE_MAP_ENABLE;
val = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_PE, val, NPU2_OCAPI_PE(dev));
val = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_BDF, val, 0);
reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC,
NPU2_MISC_BRICK0_BDF2PE_MAP0 +
(dev->brick_index * 0x18));
npu2_write(dev->npu, reg, val);
}
/* Procedure 13.1.3.5 - TL Configuration */
static void tl_config(uint32_t gcid, uint32_t scom_base, uint64_t index)
{
uint64_t reg;
uint64_t stack = index_to_stack(index);
uint64_t block = index_to_block(index);
prlog(PR_DEBUG, "OCAPI: %s: TL Configuration\n", __func__);
/* OTL Config 0 Register */
reg = 0;
/* OTL Enable */
reg |= NPU2_OTL_CONFIG0_EN;
/* Block PE Handle from ERAT Index */
reg |= NPU2_OTL_CONFIG0_BLOCK_PE_HANDLE;
/* OTL Brick ID */
reg = SETFIELD(NPU2_OTL_CONFIG0_BRICKID, reg, index - 2);
/* ERAT Hash 0 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_0, reg, 0b011001);
/* ERAT Hash 1 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_1, reg, 0b000111);
/* ERAT Hash 2 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_2, reg, 0b101100);
/* ERAT Hash 3 */
reg = SETFIELD(NPU2_OTL_CONFIG0_ERAT_HASH_3, reg, 0b100110);
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG0(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
/* OTL Config 1 Register */
reg = 0;
/*
* We leave Template 1-3 bits at 0 to force template 0 as required
* for unknown devices.
*
* Template 0 Transmit Rate is set to most conservative setting which
* will always be supported. Other Template Transmit rates are left
* unset and will be set later by OS.
*/
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_TEMP0_RATE, reg, 0b1111);
/* Extra wait cycles TXI-TXO */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_DRDY_WAIT, reg, 0b001);
/* Minimum Frequency to Return TLX Credits to AFU */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_CRET_FREQ, reg, 0b001);
/* Frequency to add age to Transmit Requests */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_AGE_FREQ, reg, 0b11000);
/* Response High Priority Threshold */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_RS2_HPWAIT, reg, 0b011011);
/* 4-slot Request High Priority Threshold */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_RQ4_HPWAIT, reg, 0b011011);
/* 6-slot Request High Priority */
reg = SETFIELD(NPU2_OTL_CONFIG1_TX_RQ6_HPWAIT, reg, 0b011011);
/* Stop the OCAPI Link on Uncorrectable Error
* TODO: Confirm final value - disabled for debug */
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG1(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
/* TLX Credit Configuration Register */
reg = 0;
/* VC0/VC3/DCP0/DCP1 credits to send to AFU */
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_VC0_CREDITS, reg, 0x40);
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_VC3_CREDITS, reg, 0x40);
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_DCP0_CREDITS, reg, 0x80);
reg = SETFIELD(NPU2_OTL_TLX_CREDITS_DCP1_CREDITS, reg, 0x80);
npu2_scom_write(gcid, scom_base, NPU2_OTL_TLX_CREDITS(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
}
/* Detect Nimbus DD2.0 and DD2.01 */
static int get_nimbus_level(void)
{
struct proc_chip *chip = next_chip(NULL);
if (chip && chip->type == PROC_CHIP_P9_NIMBUS)
return chip->ec_level & 0xff;
return -1;
}
/* Procedure 13.1.3.6 - Address Translation Configuration */
static void address_translation_config(uint32_t gcid, uint32_t scom_base,
uint64_t index)
{
int chip_level;
uint64_t reg;
uint64_t stack = index_to_stack(index);
prlog(PR_DEBUG, "OCAPI: %s: Address Translation Configuration\n", __func__);
/* PSL_SCNTL_A0 Register */
/*
* ERAT shared between multiple AFUs
*
* The workbook has this bit around the wrong way from the hardware.
*
* TODO: handle correctly with link ganging
*/
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL,
NPU2_XSL_PSL_SCNTL_A0),
NPU2_MISC_DA_LEN_8B);
reg |= NPU2_XSL_PSL_SCNTL_A0_MULTI_AFU_DIAL;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL,
NPU2_XSL_PSL_SCNTL_A0),
NPU2_MISC_DA_LEN_8B, reg);
chip_level = get_nimbus_level();
if (chip_level == 0x20) {
/*
* Errata HW408041 (section 15.1.10 of NPU workbook)
* "RA mismatch when both tlbie and checkout response
* are seen in same cycle"
*/
/* XSL_GP Register - Bloom Filter Disable */
reg = npu2_scom_read(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_GP),
NPU2_MISC_DA_LEN_8B);
/* To update XSL_GP, we must first write a magic value to it */
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_GP),
NPU2_MISC_DA_LEN_8B, 0x0523790323000000UL);
reg &= ~NPU2_XSL_GP_BLOOM_FILTER_ENABLE;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_GP),
NPU2_MISC_DA_LEN_8B, reg);
}
if (chip_level == 0x20 || chip_level == 0x21) {
/*
* DD2.0/2.1 EOA Bug. Fixed in DD2.2
*/
reg = 0x32F8000000000001UL;
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL,
NPU2_XSL_DEF),
NPU2_MISC_DA_LEN_8B, reg);
}
}
/* TODO: Merge this with NVLink implementation - we don't use the npu2_bar
* wrapper for the PHY BARs yet */
static void write_bar(uint32_t gcid, uint32_t scom_base, uint64_t reg,
uint64_t addr, uint64_t size)
{
uint64_t val;
int block;
switch (NPU2_REG(reg)) {
case NPU2_PHY_BAR:
val = SETFIELD(NPU2_PHY_BAR_ADDR, 0ul, addr >> 21);
val = SETFIELD(NPU2_PHY_BAR_ENABLE, val, 1);
break;
case NPU2_NTL0_BAR:
case NPU2_NTL1_BAR:
val = SETFIELD(NPU2_NTL_BAR_ADDR, 0ul, addr >> 16);
val = SETFIELD(NPU2_NTL_BAR_SIZE, val, ilog2(size >> 16));
val = SETFIELD(NPU2_NTL_BAR_ENABLE, val, 1);
break;
case NPU2_GENID_BAR:
val = SETFIELD(NPU2_GENID_BAR_ADDR, 0ul, addr >> 16);
val = SETFIELD(NPU2_GENID_BAR_ENABLE, val, 1);
break;
default:
val = 0ul;
}
for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
npu2_scom_write(gcid, scom_base, NPU2_REG_OFFSET(0, block, reg),
NPU2_MISC_DA_LEN_8B, val);
prlog(PR_DEBUG, "OCAPI: Setting BAR %llx to %llx\n",
NPU2_REG_OFFSET(0, block, reg), val);
}
}
static void setup_global_mmio_bar(uint32_t gcid, uint32_t scom_base,
uint64_t reg[])
{
uint64_t addr, size;
prlog(PR_DEBUG, "OCAPI: patching up PHY0 bar, %s\n", __func__);
phys_map_get(gcid, NPU_PHY, 0, &addr, &size);
write_bar(gcid, scom_base,
NPU2_REG_OFFSET(NPU2_STACK_STCK_2, 0, NPU2_PHY_BAR),
addr, size);
prlog(PR_DEBUG, "OCAPI: patching up PHY1 bar, %s\n", __func__);
phys_map_get(gcid, NPU_PHY, 1, &addr, &size);
write_bar(gcid, scom_base,
NPU2_REG_OFFSET(NPU2_STACK_STCK_1, 0, NPU2_PHY_BAR),
addr, size);
prlog(PR_DEBUG, "OCAPI: setup global mmio, %s\n", __func__);
phys_map_get(gcid, NPU_REGS, 0, &addr, &size);
write_bar(gcid, scom_base,
NPU2_REG_OFFSET(NPU2_STACK_STCK_0, 0, NPU2_PHY_BAR),
addr, size);
reg[0] = addr;
reg[1] = size;
}
/* Procedure 13.1.3.8 - AFU MMIO Range BARs */
static void setup_afu_mmio_bars(uint32_t gcid, uint32_t scom_base,
struct npu2_dev *dev)
{
uint64_t stack = index_to_stack(dev->brick_index);
uint64_t offset = index_to_block(dev->brick_index) == NPU2_BLOCK_OTL0 ?
NPU2_NTL0_BAR : NPU2_NTL1_BAR;
uint64_t pa_offset = index_to_block(dev->brick_index) == NPU2_BLOCK_OTL0 ?
NPU2_CQ_CTL_MISC_MMIOPA0_CONFIG :
NPU2_CQ_CTL_MISC_MMIOPA1_CONFIG;
uint64_t addr, size, reg;
prlog(PR_DEBUG, "OCAPI: %s: Setup AFU MMIO BARs\n", __func__);
phys_map_get(gcid, NPU_OCAPI_MMIO, dev->brick_index, &addr, &size);
prlog(PR_DEBUG, "OCAPI: AFU MMIO set to %llx, size %llx\n", addr, size);
write_bar(gcid, scom_base, NPU2_REG_OFFSET(stack, 0, offset), addr,
size);
dev->bars[0].npu2_bar.base = addr;
dev->bars[0].npu2_bar.size = size;
reg = SETFIELD(NPU2_CQ_CTL_MISC_MMIOPA_ADDR, 0ull, addr >> 16);
reg = SETFIELD(NPU2_CQ_CTL_MISC_MMIOPA_SIZE, reg, ilog2(size >> 16));
prlog(PR_DEBUG, "OCAPI: PA translation %llx\n", reg);
npu2_scom_write(gcid, scom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL,
pa_offset),
NPU2_MISC_DA_LEN_8B, reg);
}
/* Procedure 13.1.3.9 - AFU Config BARs */
static void setup_afu_config_bars(uint32_t gcid, uint32_t scom_base,
struct npu2_dev *dev)
{
uint64_t stack = index_to_stack(dev->brick_index);
int stack_num = stack - NPU2_STACK_STCK_0;
uint64_t addr, size;
prlog(PR_DEBUG, "OCAPI: %s: Setup AFU Config BARs\n", __func__);
phys_map_get(gcid, NPU_GENID, stack_num, &addr, &size);
prlog(PR_DEBUG, "OCAPI: Assigning GENID BAR: %016llx\n", addr);
write_bar(gcid, scom_base, NPU2_REG_OFFSET(stack, 0, NPU2_GENID_BAR),
addr, size);
dev->bars[1].npu2_bar.base = addr;
dev->bars[1].npu2_bar.size = size;
}
static void otl_enabletx(uint32_t gcid, uint32_t scom_base,
struct npu2_dev *dev)
{
uint64_t stack = index_to_stack(dev->brick_index);
uint64_t block = index_to_block(dev->brick_index);
uint64_t reg;
/* OTL Config 2 Register */
/* Transmit Enable */
OCAPIDBG(dev, "Enabling TX\n");
reg = 0;
reg |= NPU2_OTL_CONFIG2_TX_SEND_EN;
npu2_scom_write(gcid, scom_base, NPU2_OTL_CONFIG2(stack, block),
NPU2_MISC_DA_LEN_8B, reg);
reg = npu2_scom_read(gcid, scom_base, NPU2_OTL_VC_CREDITS(stack, block),
NPU2_MISC_DA_LEN_8B);
OCAPIDBG(dev, "credit counter: %llx\n", reg);
/* TODO: Abort if credits are zero */
}
static uint8_t get_reset_pin(struct npu2_dev *dev)
{
uint8_t pin;
switch (dev->brick_index) {
case 2:
pin = platform.ocapi->i2c_reset_brick2;
break;
case 3:
pin = platform.ocapi->i2c_reset_brick3;
break;
case 4:
pin = platform.ocapi->i2c_reset_brick4;
break;
case 5:
pin = platform.ocapi->i2c_reset_brick5;
break;
default:
assert(false);
}
return pin;
}
static void assert_adapter_reset(struct npu2_dev *dev)
{
uint8_t pin, data;
int rc;
pin = get_reset_pin(dev);
/*
* set the i2c reset pin in output mode
*
* On the 9554 device, register 3 is the configuration
* register and a pin is in output mode if its value is 0
*/
lock(&dev->npu->i2c_lock);
dev->npu->i2c_pin_mode &= ~pin;
data = dev->npu->i2c_pin_mode;
rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
0x3, 1,
&data, sizeof(data), 120);
if (rc)
goto err;
/* register 1 controls the signal, reset is active low */
dev->npu->i2c_pin_wr_state &= ~pin;
data = dev->npu->i2c_pin_wr_state;
rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
0x1, 1,
&data, sizeof(data), 120);
if (rc)
goto err;
unlock(&dev->npu->i2c_lock);
return;
err:
unlock(&dev->npu->i2c_lock);
/**
* @fwts-label OCAPIDeviceResetFailed
* @fwts-advice There was an error attempting to send
* a reset signal over I2C to the OpenCAPI device.
*/
OCAPIERR(dev, "Error writing I2C reset signal: %d\n", rc);
}
static void deassert_adapter_reset(struct npu2_dev *dev)
{
uint8_t pin, data;
int rc;
pin = get_reset_pin(dev);
lock(&dev->npu->i2c_lock);
dev->npu->i2c_pin_wr_state |= pin;
data = dev->npu->i2c_pin_wr_state;
rc = i2c_request_send(dev->npu->i2c_port_id_ocapi,
platform.ocapi->i2c_reset_addr, SMBUS_WRITE,
0x1, 1,
&data, sizeof(data), 120);
unlock(&dev->npu->i2c_lock);
if (rc) {
/**
* @fwts-label OCAPIDeviceResetFailed
* @fwts-advice There was an error attempting to send
* a reset signal over I2C to the OpenCAPI device.
*/
OCAPIERR(dev, "Error writing I2C reset signal: %d\n", rc);
}
}
static void setup_perf_counters(struct npu2_dev *dev)
{
uint64_t addr, reg, link;
/*
* setup the DLL perf counters to check CRC errors detected by
* the NPU or the adapter.
*
* Counter 0: link 0/ODL0, CRC error detected by ODL
* Counter 1: link 0/ODL0, CRC error detected by DLx
* Counter 2: link 1/ODL1, CRC error detected by ODL
* Counter 3: link 1/ODL1, CRC error detected by DLx
*/
if ((dev->brick_index == 2) || (dev->brick_index == 5))
link = 0;
else
link = 1;
addr = OB_DLL_PERF_MONITOR_CONFIG(dev->brick_index);
xscom_read(dev->npu->chip_id, addr, ®);
if (link == 0) {
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK0);
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE >> 2, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK0);
} else {
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE >> 4, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK1);
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_ENABLE >> 6, reg,
OB_DLL_PERF_MONITOR_CONFIG_LINK1);
}
reg = SETFIELD(OB_DLL_PERF_MONITOR_CONFIG_SIZE, reg,
OB_DLL_PERF_MONITOR_CONFIG_SIZE16);
xscom_write(dev->npu->chip_id,
OB_DLL_PERF_MONITOR_CONFIG(dev->brick_index), reg);
OCAPIDBG(dev, "perf counter config %llx = %llx\n", addr, reg);
addr = OB_DLL_PERF_MONITOR_SELECT(dev->brick_index);
xscom_read(dev->npu->chip_id, addr, ®);
reg = SETFIELD(OB_DLL_PERF_MONITOR_SELECT_COUNTER >> (link * 16),
reg, OB_DLL_PERF_MONITOR_SELECT_CRC_ODL);
reg = SETFIELD(OB_DLL_PERF_MONITOR_SELECT_COUNTER >> ((link * 16) + 8),
reg, OB_DLL_PERF_MONITOR_SELECT_CRC_DLX);
xscom_write(dev->npu->chip_id, addr, reg);
OCAPIDBG(dev, "perf counter select %llx = %llx\n", addr, reg);
}
static void check_perf_counters(struct npu2_dev *dev)
{
uint64_t addr, reg, link0, link1;
addr = OB_DLL_PERF_COUNTER0(dev->brick_index);
xscom_read(dev->npu->chip_id, addr, ®);
link0 = GETFIELD(PPC_BITMASK(0, 31), reg);
link1 = GETFIELD(PPC_BITMASK(32, 63), reg);
if (link0 || link1)
OCAPIERR(dev, "CRC error count link0=%08llx link1=%08llx\n",
link0, link1);
}
static void set_init_pattern(uint32_t gcid, struct npu2_dev *dev)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(dev->brick_index);
/* Transmit Pattern A */
xscom_read(gcid, config_xscom, ®);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b0001);
xscom_write(gcid, config_xscom, reg);
}
static void start_training(uint32_t gcid, struct npu2_dev *dev)
{
uint64_t reg, config_xscom;
config_xscom = OB_ODL_CONFIG(dev->brick_index);
/* Start training */
xscom_read(gcid, config_xscom, ®);
reg = SETFIELD(OB_ODL_CONFIG_TRAIN_MODE, reg, 0b1000);
xscom_write(gcid, config_xscom, reg);
}
static int64_t npu2_opencapi_get_presence_state(struct pci_slot __unused *slot,
uint8_t *val)
{
/*
* Presence detection for OpenCAPI is currently done at the start of
* NPU initialisation, and we only create slots if a device is present.
* As such we will never be asked to get the presence of a slot that's
* empty.
*
* This may change if we ever support surprise hotplug down
* the track.
*/
*val = OPAL_PCI_SLOT_PRESENT;
return OPAL_SUCCESS;
}
static void fence_brick(struct npu2_dev *dev)
{
OCAPIDBG(dev, "Fencing brick\n");
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
dev->brick_index, 0b11);
/* from 13.2.1, Quiesce Fence State */
npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
PPC_BIT(dev->brick_index + 6));
}
static void unfence_brick(struct npu2_dev *dev)
{
OCAPIDBG(dev, "Unfencing brick\n");
npu2_write(dev->npu, NPU2_MISC_FENCE_STATE,
PPC_BIT(dev->brick_index));
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
dev->brick_index, 0b10);
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base,
dev->brick_index, 0b00);
}
static enum OpalShpcLinkState get_link_width(uint64_t odl_status)
{
uint64_t tx_lanes, rx_lanes, state;
/*
* On P9, the 'trained mode' field of the ODL status is
* hard-coded to x8 and is useless for us. We need to look at
* the status of the individual lanes.
* The link trains at x8, x4 or not at all.
*/
state = GETFIELD(OB_ODL_STATUS_TRAINING_STATE_MACHINE, odl_status);
if (state != OCAPI_LINK_STATE_TRAINED)
return OPAL_SHPC_LINK_DOWN;
rx_lanes = GETFIELD(OB_ODL_STATUS_RX_TRAINED_LANES, odl_status);
tx_lanes = GETFIELD(OB_ODL_STATUS_TX_TRAINED_LANES, odl_status);
if ((rx_lanes != 0xFF) || (tx_lanes != 0xFF))
return OPAL_SHPC_LINK_UP_x4;
else
return OPAL_SHPC_LINK_UP_x8;
}
static int64_t npu2_opencapi_get_link_state(struct pci_slot *slot, uint8_t *val)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint64_t reg;
reg = get_odl_status(dev->npu->chip_id, dev->brick_index);
*val = get_link_width(reg);
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_get_power_state(struct pci_slot *slot,
uint8_t *val)
{
*val = slot->power_state;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_set_power_state(struct pci_slot *slot, uint8_t val)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
switch (val) {
case PCI_SLOT_POWER_OFF:
OCAPIDBG(dev, "Fake power off\n");
fence_brick(dev);
assert_adapter_reset(dev);
slot->power_state = PCI_SLOT_POWER_OFF;
return OPAL_SUCCESS;
case PCI_SLOT_POWER_ON:
if (slot->power_state != PCI_SLOT_POWER_OFF)
return OPAL_SUCCESS;
OCAPIDBG(dev, "Fake power on\n");
slot->power_state = PCI_SLOT_POWER_ON;
slot->state = OCAPI_SLOT_NORMAL;
return OPAL_SUCCESS;
default:
return OPAL_UNSUPPORTED;
}
}
static void check_trained_link(struct npu2_dev *dev, uint64_t odl_status)
{
if (get_link_width(odl_status) != OPAL_SHPC_LINK_UP_x8) {
OCAPIERR(dev, "Link trained in degraded mode (%016llx)\n",
odl_status);
OCAPIDBG(dev, "Link endpoint info: %016llx\n",
get_odl_endpoint_info(dev->npu->chip_id, dev->brick_index));
}
}
static int64_t npu2_opencapi_retry_state(struct pci_slot *slot,
uint64_t odl_status)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint32_t chip_id = dev->npu->chip_id;
if (!slot->link_retries--) {
/**
* @fwts-label OCAPILinkTrainingFailed
* @fwts-advice The OpenCAPI link training procedure failed.
* This indicates a hardware or firmware bug. OpenCAPI
* functionality will not be available on this link.
*/
OCAPIERR(dev,
"Link failed to train, final link status: %016llx\n",
odl_status);
OCAPIDBG(dev, "Final link training status: %016llx\n",
get_odl_training_status(chip_id, dev->brick_index));
return OPAL_HARDWARE;
}
OCAPIERR(dev, "Link failed to train, retrying\n");
OCAPIDBG(dev, "Link status: %016llx, training status: %016llx\n",
odl_status,
get_odl_training_status(chip_id, dev->brick_index));
pci_slot_set_state(slot, OCAPI_SLOT_FRESET_INIT);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
}
static void npu2_opencapi_prepare_link_change(struct pci_slot *slot __unused,
bool up __unused)
{
/*
* PCI hotplug wants it defined, but we don't need to do anything
*/
}
static int64_t npu2_opencapi_poll_link(struct pci_slot *slot)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint32_t chip_id = dev->npu->chip_id;
uint64_t reg;
switch (slot->state) {
case OCAPI_SLOT_NORMAL:
case OCAPI_SLOT_LINK_START:
OCAPIDBG(dev, "Start polling\n");
pci_slot_set_state(slot, OCAPI_SLOT_LINK_WAIT);
/* fall-through */
case OCAPI_SLOT_LINK_WAIT:
reg = get_odl_status(chip_id, dev->brick_index);
if (GETFIELD(OB_ODL_STATUS_TRAINING_STATE_MACHINE, reg) ==
OCAPI_LINK_STATE_TRAINED) {
OCAPIINF(dev, "link trained in %ld ms\n",
tb_to_msecs(mftb() - dev->train_start));
check_trained_link(dev, reg);
pci_slot_set_state(slot, OCAPI_SLOT_LINK_TRAINED);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
}
if (tb_compare(mftb(), dev->train_timeout) == TB_AAFTERB)
return npu2_opencapi_retry_state(slot, reg);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(1));
case OCAPI_SLOT_LINK_TRAINED:
otl_enabletx(chip_id, dev->npu->xscom_base, dev);
pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
check_perf_counters(dev);
dev->phb_ocapi.scan_map = 1;
return OPAL_SUCCESS;
default:
OCAPIERR(dev, "unexpected slot state %08x\n", slot->state);
}
pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
return OPAL_HARDWARE;
}
static int64_t npu2_opencapi_creset(struct pci_slot *slot)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
OCAPIERR(dev, "creset not supported\n");
return OPAL_UNSUPPORTED;
}
static int64_t npu2_opencapi_freset(struct pci_slot *slot)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
uint32_t chip_id = dev->npu->chip_id;
uint8_t presence = 1;
int rc;
switch (slot->state) {
case OCAPI_SLOT_NORMAL:
case OCAPI_SLOT_FRESET_START:
OCAPIDBG(dev, "FRESET starts\n");
if (slot->ops.get_presence_state)
slot->ops.get_presence_state(slot, &presence);
if (!presence) {
/*
* FIXME: if there's no card on the link, we
* should consider powering off the unused
* lanes to save energy
*/
OCAPIINF(dev, "no card detected\n");
return OPAL_SUCCESS;
}
slot->link_retries = OCAPI_LINK_TRAINING_RETRIES;
/* fall-through */
case OCAPI_SLOT_FRESET_INIT:
fence_brick(dev);
assert_odl_reset(chip_id, dev->brick_index);
assert_adapter_reset(dev);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_ASSERT_DELAY);
/* assert for 5ms */
return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
case OCAPI_SLOT_FRESET_ASSERT_DELAY:
rc = npu2_opencapi_phy_reset(dev);
if (rc) {
OCAPIERR(dev, "FRESET: couldn't reset PHY state\n");
return OPAL_HARDWARE;
}
deassert_odl_reset(chip_id, dev->brick_index);
deassert_adapter_reset(dev);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_DEASSERT_DELAY);
/* give 250ms to device to be ready */
return pci_slot_set_sm_timeout(slot, msecs_to_tb(250));
case OCAPI_SLOT_FRESET_DEASSERT_DELAY:
unfence_brick(dev);
set_init_pattern(chip_id, dev);
pci_slot_set_state(slot,
OCAPI_SLOT_FRESET_INIT_DELAY);
return pci_slot_set_sm_timeout(slot, msecs_to_tb(5));
case OCAPI_SLOT_FRESET_INIT_DELAY:
/* Bump lanes - this improves training reliability */
npu2_opencapi_bump_ui_lane(dev);
start_training(chip_id, dev);
dev->train_start = mftb();
dev->train_timeout = dev->train_start + msecs_to_tb(OCAPI_LINK_TRAINING_TIMEOUT);
pci_slot_set_state(slot, OCAPI_SLOT_LINK_START);
return slot->ops.poll_link(slot);
default:
OCAPIERR(dev, "FRESET: unexpected slot state %08x\n",
slot->state);
}
pci_slot_set_state(slot, OCAPI_SLOT_NORMAL);
return OPAL_HARDWARE;
}
static int64_t npu2_opencapi_hreset(struct pci_slot *slot __unused)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(slot->phb);
OCAPIERR(dev, "hreset not supported\n");
return OPAL_UNSUPPORTED;
}
static void make_slot_hotpluggable(struct pci_slot *slot, struct phb *phb)
{
char label[40];
/*
* Add a few definitions to the DT so that the linux PCI
* hotplug framework can find the slot and identify it as
* hot-pluggable.
*
* The "ibm,slot-label" property is used by linux as the slot name
*/
slot->pluggable = 1;
pci_slot_add_dt_properties(slot, phb->dt_node);
snprintf(label, sizeof(label), "OPENCAPI-%04x",
(int)PCI_SLOT_PHB_INDEX(slot->id));
dt_add_property_string(phb->dt_node, "ibm,slot-label", label);
}
static struct pci_slot *npu2_opencapi_slot_create(struct phb *phb)
{
struct pci_slot *slot;
slot = pci_slot_alloc(phb, NULL);
if (!slot)
return slot;
/* TODO: Figure out other slot functions */
slot->ops.get_presence_state = npu2_opencapi_get_presence_state;
slot->ops.get_link_state = npu2_opencapi_get_link_state;
slot->ops.get_power_state = npu2_opencapi_get_power_state;
slot->ops.get_attention_state = NULL;
slot->ops.get_latch_state = NULL;
slot->ops.set_power_state = npu2_opencapi_set_power_state;
slot->ops.set_attention_state = NULL;
slot->ops.prepare_link_change = npu2_opencapi_prepare_link_change;
slot->ops.poll_link = npu2_opencapi_poll_link;
slot->ops.creset = npu2_opencapi_creset;
slot->ops.freset = npu2_opencapi_freset;
slot->ops.hreset = npu2_opencapi_hreset;
return slot;
}
static int64_t npu2_opencapi_pcicfg_check(struct npu2_dev *dev, uint32_t offset,
uint32_t size)
{
if (!dev || offset > 0xfff || (offset & (size - 1)))
return OPAL_PARAMETER;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_pcicfg_read(struct phb *phb, uint32_t bdfn,
uint32_t offset, uint32_t size,
void *data)
{
uint64_t cfg_addr;
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
uint64_t genid_base;
int64_t rc;
rc = npu2_opencapi_pcicfg_check(dev, offset, size);
if (rc)
return rc;
genid_base = dev->bars[1].npu2_bar.base +
(index_to_block(dev->brick_index) == NPU2_BLOCK_OTL1 ? 256 : 0);
cfg_addr = NPU2_CQ_CTL_CONFIG_ADDR_ENABLE;
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_BUS_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_DEVICE_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_FUNCTION_NUMBER,
cfg_addr, bdfn);
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_REGISTER_NUMBER,
cfg_addr, offset & ~3u);
out_be64((uint64_t *)genid_base, cfg_addr);
sync();
switch (size) {
case 1:
*((uint8_t *)data) =
in_8((volatile uint8_t *)(genid_base + 128 + (offset & 3)));
break;
case 2:
*((uint16_t *)data) =
in_le16((volatile uint16_t *)(genid_base + 128 + (offset & 2)));
break;
case 4:
*((uint32_t *)data) = in_le32((volatile uint32_t *)(genid_base + 128));
break;
default:
return OPAL_PARAMETER;
}
return OPAL_SUCCESS;
}
#define NPU2_OPENCAPI_PCI_CFG_READ(size, type) \
static int64_t npu2_opencapi_pcicfg_read##size(struct phb *phb, \
uint32_t bdfn, \
uint32_t offset, \
type *data) \
{ \
/* Initialize data in case of error */ \
*data = (type)0xffffffff; \
return npu2_opencapi_pcicfg_read(phb, bdfn, offset, \
sizeof(type), data); \
}
static int64_t npu2_opencapi_pcicfg_write(struct phb *phb, uint32_t bdfn,
uint32_t offset, uint32_t size,
uint32_t data)
{
uint64_t cfg_addr;
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
uint64_t genid_base;
int64_t rc;
rc = npu2_opencapi_pcicfg_check(dev, offset, size);
if (rc)
return rc;
genid_base = dev->bars[1].npu2_bar.base +
(index_to_block(dev->brick_index) == NPU2_BLOCK_OTL1 ? 256 : 0);
cfg_addr = NPU2_CQ_CTL_CONFIG_ADDR_ENABLE;
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_BUS_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_DEVICE_NUMBER |
NPU2_CQ_CTL_CONFIG_ADDR_FUNCTION_NUMBER,
cfg_addr, bdfn);
cfg_addr = SETFIELD(NPU2_CQ_CTL_CONFIG_ADDR_REGISTER_NUMBER,
cfg_addr, offset & ~3u);
out_be64((uint64_t *)genid_base, cfg_addr);
sync();
switch (size) {
case 1:
out_8((volatile uint8_t *)(genid_base + 128 + (offset & 3)),
data);
break;
case 2:
out_le16((volatile uint16_t *)(genid_base + 128 + (offset & 2)),
data);
break;
case 4:
out_le32((volatile uint32_t *)(genid_base + 128), data);
break;
default:
return OPAL_PARAMETER;
}
return OPAL_SUCCESS;
}
#define NPU2_OPENCAPI_PCI_CFG_WRITE(size, type) \
static int64_t npu2_opencapi_pcicfg_write##size(struct phb *phb, \
uint32_t bdfn, \
uint32_t offset, \
type data) \
{ \
return npu2_opencapi_pcicfg_write(phb, bdfn, offset, \
sizeof(type), data); \
}
NPU2_OPENCAPI_PCI_CFG_READ(8, u8)
NPU2_OPENCAPI_PCI_CFG_READ(16, u16)
NPU2_OPENCAPI_PCI_CFG_READ(32, u32)
NPU2_OPENCAPI_PCI_CFG_WRITE(8, u8)
NPU2_OPENCAPI_PCI_CFG_WRITE(16, u16)
NPU2_OPENCAPI_PCI_CFG_WRITE(32, u32)
static int64_t npu2_opencapi_ioda_reset(struct phb __unused *phb,
bool __unused purge)
{
/* Not relevant to OpenCAPI - we do this just to silence the error */
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_set_pe(struct phb *phb,
uint64_t pe_num,
uint64_t __unused bdfn,
uint8_t __unused bcompare,
uint8_t __unused dcompare,
uint8_t __unused fcompare,
uint8_t __unused action)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
/*
* Ignored on OpenCAPI - we use fixed PE assignments. May need
* addressing when we support dual-link devices.
*
* We nonetheless store the PE reported by the OS so that we
* can send it back in case of error. If there are several PCI
* functions on the device, the OS can define many PEs, we
* only keep one, the OS will handle it.
*/
dev->linux_pe = pe_num;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_freeze_status(struct phb *phb __unused,
uint64_t pe_number __unused,
uint8_t *freeze_state,
uint16_t *pci_error_type,
uint16_t *severity)
{
*freeze_state = OPAL_EEH_STOPPED_NOT_FROZEN;
*pci_error_type = OPAL_EEH_NO_ERROR;
if (severity)
*severity = OPAL_EEH_SEV_NO_ERROR;
return OPAL_SUCCESS;
}
static int64_t npu2_opencapi_eeh_next_error(struct phb *phb,
uint64_t *first_frozen_pe,
uint16_t *pci_error_type,
uint16_t *severity)
{
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
if (!first_frozen_pe || !pci_error_type || !severity)
return OPAL_PARAMETER;
if (dev->flags & NPU2_DEV_BROKEN) {
OCAPIDBG(dev, "Reporting device as broken\n");
*first_frozen_pe = dev->linux_pe;
*pci_error_type = OPAL_EEH_PHB_ERROR;
*severity = OPAL_EEH_SEV_PHB_DEAD;
} else {
*first_frozen_pe = -1;
*pci_error_type = OPAL_EEH_NO_ERROR;
*severity = OPAL_EEH_SEV_NO_ERROR;
}
return OPAL_SUCCESS;
}
static int npu2_add_mmio_regs(struct phb *phb, struct pci_device *pd,
void *data __unused)
{
uint32_t irq;
struct npu2_dev *dev = phb_to_npu2_dev_ocapi(phb);
uint64_t block = index_to_block(dev->brick_index);
uint64_t stacku = index_to_stacku(dev->brick_index);
uint64_t dsisr, dar, tfc, handle;
/*
* Pass the hw irq number for the translation fault irq
* irq levels 23 -> 26 are for translation faults, 1 per brick
*/
irq = dev->npu->base_lsi + NPU_IRQ_LEVELS_XSL;
if (stacku == NPU2_STACK_STCK_2U)
irq += 2;
if (block == NPU2_BLOCK_OTL1)
irq++;
/*
* Add the addresses of the registers needed by the OS to handle
* faults. The OS accesses them by mmio.
*/
dsisr = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_DSISR(stacku, block);
dar = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_DAR(stacku, block);
tfc = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_TFC(stacku, block);
handle = (uint64_t) dev->npu->regs + NPU2_OTL_OSL_PEHANDLE(stacku,
block);
dt_add_property_cells(pd->dn, "ibm,opal-xsl-irq", irq);
dt_add_property_cells(pd->dn, "ibm,opal-xsl-mmio",
hi32(dsisr), lo32(dsisr),
hi32(dar), lo32(dar),
hi32(tfc), lo32(tfc),
hi32(handle), lo32(handle));
return 0;
}
static void npu2_opencapi_final_fixup(struct phb *phb)
{
pci_walk_dev(phb, NULL, npu2_add_mmio_regs, NULL);
}
static void mask_nvlink_fir(struct npu2 *p)
{
uint64_t reg;
/*
* From section 13.1.3.10 of the NPU workbook: "the NV-Link
* Datalink Layer Stall and NoStall signals are used for a
* different purpose when the link is configured for
* OpenCAPI. Therefore, the corresponding bits in NPU FIR
* Register 1 must be masked and configured to NOT cause the
* NPU to go into Freeze or Fence mode or send an Interrupt."
*
* FIXME: will need to revisit when mixing nvlink with
* opencapi. Assumes an opencapi-only setup on both PHYs for
* now.
*/
/* Mask FIRs */
xscom_read(p->chip_id, p->xscom_base + NPU2_MISC_FIR1_MASK, ®);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0xFFF);
xscom_write(p->chip_id, p->xscom_base + NPU2_MISC_FIR1_MASK, reg);
/* freeze disable */
reg = npu2_scom_read(p->chip_id, p->xscom_base,
NPU2_MISC_FREEZE_ENABLE1, NPU2_MISC_DA_LEN_8B);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0);
npu2_scom_write(p->chip_id, p->xscom_base,
NPU2_MISC_FREEZE_ENABLE1, NPU2_MISC_DA_LEN_8B, reg);
/* fence disable */
reg = npu2_scom_read(p->chip_id, p->xscom_base,
NPU2_MISC_FENCE_ENABLE1, NPU2_MISC_DA_LEN_8B);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0);
npu2_scom_write(p->chip_id, p->xscom_base,
NPU2_MISC_FENCE_ENABLE1, NPU2_MISC_DA_LEN_8B, reg);
/* irq disable */
reg = npu2_scom_read(p->chip_id, p->xscom_base,
NPU2_MISC_IRQ_ENABLE1, NPU2_MISC_DA_LEN_8B);
reg = SETFIELD(PPC_BITMASK(0, 11), reg, 0);
npu2_scom_write(p->chip_id, p->xscom_base,
NPU2_MISC_IRQ_ENABLE1, NPU2_MISC_DA_LEN_8B, reg);
}
static int enable_interrupts(struct npu2 *p)
{
uint64_t reg, xsl_fault, xstop_override, xsl_mask;
/*
* We need to:
* - enable translation interrupts for all bricks
* - override most brick-fatal errors from FIR2 to send an
* interrupt instead of the default action of checkstopping
* the systems, since we can just fence the brick and keep
* the system alive.
* - the exception to the above is 2 FIRs for XSL errors
* resulting of bad AFU behavior, for which we don't want to
* checkstop but can't configure to send an error interrupt
* either, as the XSL errors are reported on 2 links (the
* XSL is shared between 2 links). Instead, we mask
* them. The XSL errors will result in an OTL error, which
* is reported only once, for the correct link.
*
* FIR bits configured to trigger an interrupt must have their
* default action masked
*/
xsl_fault = PPC_BIT(0) | PPC_BIT(1) | PPC_BIT(2) | PPC_BIT(3);
xstop_override = 0x0FFFEFC00F91B000;
xsl_mask = PPC_BIT(41) | PPC_BIT(42);
xscom_read(p->chip_id, p->xscom_base + NPU2_MISC_FIR2_MASK, ®);
reg |= xsl_fault | xstop_override | xsl_mask;
xscom_write(p->chip_id, p->xscom_base + NPU2_MISC_FIR2_MASK, reg);
reg = npu2_scom_read(p->chip_id, p->xscom_base, NPU2_MISC_IRQ_ENABLE2,
NPU2_MISC_DA_LEN_8B);
reg |= xsl_fault | xstop_override;
npu2_scom_write(p->chip_id, p->xscom_base, NPU2_MISC_IRQ_ENABLE2,
NPU2_MISC_DA_LEN_8B, reg);
/*
* Make sure the brick is fenced on those errors.
* Fencing is incompatible with freezing, but there's no
* freeze defined for FIR2, so we don't have to worry about it
*/
reg = npu2_scom_read(p->chip_id, p->xscom_base, NPU2_MISC_FENCE_ENABLE2,
NPU2_MISC_DA_LEN_8B);
reg |= xstop_override;
npu2_scom_write(p->chip_id, p->xscom_base, NPU2_MISC_FENCE_ENABLE2,
NPU2_MISC_DA_LEN_8B, reg);
mask_nvlink_fir(p);
return 0;
}
static void setup_debug_training_state(struct npu2_dev *dev)
{
npu2_opencapi_phy_reset(dev);
switch (npu2_ocapi_training_state) {
case NPU2_TRAIN_PRBS31:
OCAPIINF(dev, "sending PRBS31 pattern per NVRAM setting\n");
npu2_opencapi_phy_prbs31(dev);
break;
case NPU2_TRAIN_NONE:
OCAPIINF(dev, "link not trained per NVRAM setting\n");
break;
default:
assert(false);
}
}
static void setup_device(struct npu2_dev *dev)
{
struct dt_node *dn_phb;
struct pci_slot *slot;
uint64_t mm_win[2];
/* Populate PHB device node */
phys_map_get(dev->npu->chip_id, NPU_OCAPI_MMIO, dev->brick_index, &mm_win[0],
&mm_win[1]);
prlog(PR_DEBUG, "OCAPI: Setting MMIO window to %016llx + %016llx\n",
mm_win[0], mm_win[1]);
dn_phb = dt_new_addr(dt_root, "pciex", mm_win[0]);
assert(dn_phb);
dt_add_property_strings(dn_phb,
"compatible",
"ibm,power9-npu-opencapi-pciex",
"ibm,ioda2-npu2-opencapi-phb");
dt_add_property_cells(dn_phb, "#address-cells", 3);
dt_add_property_cells(dn_phb, "#size-cells", 2);
dt_add_property_cells(dn_phb, "#interrupt-cells", 1);
dt_add_property_cells(dn_phb, "bus-range", 0, 0xff);
dt_add_property_cells(dn_phb, "clock-frequency", 0x200, 0);
dt_add_property_cells(dn_phb, "interrupt-parent", get_ics_phandle());
dt_add_property_strings(dn_phb, "device_type", "pciex");
dt_add_property(dn_phb, "reg", mm_win, sizeof(mm_win));
dt_add_property_cells(dn_phb, "ibm,npu-index", dev->npu->index);
dt_add_property_cells(dn_phb, "ibm,chip-id", dev->npu->chip_id);
dt_add_property_cells(dn_phb, "ibm,xscom-base", dev->npu->xscom_base);
dt_add_property_cells(dn_phb, "ibm,npcq", dev->npu->dt_node->phandle);
dt_add_property_cells(dn_phb, "ibm,links", 1);
dt_add_property(dn_phb, "ibm,mmio-window", mm_win, sizeof(mm_win));
dt_add_property_cells(dn_phb, "ibm,phb-diag-data-size", 0);
/*
* We ignore whatever PE numbers Linux tries to set, so we just
* advertise enough that Linux won't complain
*/
dt_add_property_cells(dn_phb, "ibm,opal-num-pes", NPU2_MAX_PE_NUM);
dt_add_property_cells(dn_phb, "ibm,opal-reserved-pe", NPU2_RESERVED_PE_NUM);
dt_add_property_cells(dn_phb, "ranges", 0x02000000,
hi32(mm_win[0]), lo32(mm_win[0]),
hi32(mm_win[0]), lo32(mm_win[0]),
hi32(mm_win[1]), lo32(mm_win[1]));
dev->phb_ocapi.dt_node = dn_phb;
dev->phb_ocapi.ops = &npu2_opencapi_ops;
dev->phb_ocapi.phb_type = phb_type_npu_v2_opencapi;
dev->phb_ocapi.scan_map = 0;
dev->bdfn = 0;
dev->linux_pe = -1;
/* TODO: Procedure 13.1.3.7 - AFU Memory Range BARs */
/* Procedure 13.1.3.8 - AFU MMIO Range BARs */
setup_afu_mmio_bars(dev->npu->chip_id, dev->npu->xscom_base, dev);
/* Procedure 13.1.3.9 - AFU Config BARs */
setup_afu_config_bars(dev->npu->chip_id, dev->npu->xscom_base, dev);
setup_perf_counters(dev);
npu2_opencapi_phy_init(dev);
set_fence_control(dev->npu->chip_id, dev->npu->xscom_base, dev->brick_index, 0b00);
pci_register_phb(&dev->phb_ocapi, OPAL_DYNAMIC_PHB_ID);
if (npu2_ocapi_training_state != NPU2_TRAIN_DEFAULT) {
setup_debug_training_state(dev);
} else {
slot = npu2_opencapi_slot_create(&dev->phb_ocapi);
if (!slot) {
/**
* @fwts-label OCAPICannotCreatePHBSlot
* @fwts-advice Firmware probably ran out of memory creating
* NPU slot. OpenCAPI functionality could be broken.
*/
prlog(PR_ERR, "OCAPI: Cannot create PHB slot\n");
}
make_slot_hotpluggable(slot, &dev->phb_ocapi);
}
return;
}
static void read_nvram_training_state(void)
{
const char *state;
state = nvram_query_dangerous("opencapi-link-training");
if (state) {
if (!strcmp(state, "prbs31"))
npu2_ocapi_training_state = NPU2_TRAIN_PRBS31;
else if (!strcmp(state, "none"))
npu2_ocapi_training_state = NPU2_TRAIN_NONE;
else
prlog(PR_WARNING,
"OCAPI: invalid training state in NVRAM: %s\n",
state);
}
}
int npu2_opencapi_init_npu(struct npu2 *npu)
{
struct npu2_dev *dev;
uint64_t reg[2];
assert(platform.ocapi);
read_nvram_training_state();
/* TODO: Test OpenCAPI with fast reboot and make it work */
disable_fast_reboot("OpenCAPI device enabled");
setup_global_mmio_bar(npu->chip_id, npu->xscom_base, reg);
npu->regs = (void *)reg[0];
for (int i = 0; i < npu->total_devices; i++) {
dev = &npu->devices[i];
if (dev->type != NPU2_DEV_TYPE_OPENCAPI)
continue;
prlog(PR_INFO, "OCAPI: Configuring link index %d, brick %d\n",
dev->link_index, dev->brick_index);
/* Procedure 13.1.3.1 - Select OCAPI vs NVLink */
brick_config(npu->chip_id, npu->xscom_base, dev->brick_index);
/* Procedure 13.1.3.4 - Brick to PE Mapping */
pe_config(dev);
/* Procedure 13.1.3.5 - Transaction Layer Configuration */
tl_config(npu->chip_id, npu->xscom_base, dev->brick_index);
/* Procedure 13.1.3.6 - Address Translation Configuration */
address_translation_config(npu->chip_id, npu->xscom_base, dev->brick_index);
}
enable_interrupts(npu);
for (int i = 0; i < npu->total_devices; i++) {
dev = &npu->devices[i];
if (dev->type != NPU2_DEV_TYPE_OPENCAPI)
continue;
setup_device(dev);
}
return 0;
}
static const struct phb_ops npu2_opencapi_ops = {
.cfg_read8 = npu2_opencapi_pcicfg_read8,
.cfg_read16 = npu2_opencapi_pcicfg_read16,
.cfg_read32 = npu2_opencapi_pcicfg_read32,
.cfg_write8 = npu2_opencapi_pcicfg_write8,
.cfg_write16 = npu2_opencapi_pcicfg_write16,
.cfg_write32 = npu2_opencapi_pcicfg_write32,
.choose_bus = NULL,
.device_init = NULL,
.phb_final_fixup = npu2_opencapi_final_fixup,
.ioda_reset = npu2_opencapi_ioda_reset,
.papr_errinjct_reset = NULL,
.pci_reinit = NULL,
.set_phb_mem_window = NULL,
.phb_mmio_enable = NULL,
.map_pe_mmio_window = NULL,
.map_pe_dma_window = NULL,
.map_pe_dma_window_real = NULL,
.pci_msi_eoi = NULL,
.set_xive_pe = NULL,
.get_msi_32 = NULL,
.get_msi_64 = NULL,
.set_pe = npu2_opencapi_set_pe,
.set_peltv = NULL,
.eeh_freeze_status = npu2_opencapi_freeze_status,
.eeh_freeze_clear = NULL,
.eeh_freeze_set = NULL,
.next_error = npu2_opencapi_eeh_next_error,
.err_inject = NULL,
.get_diag_data2 = NULL,
.set_capi_mode = NULL,
.set_capp_recovery = NULL,
.tce_kill = NULL,
};
void npu2_opencapi_set_broken(struct npu2 *npu, int brick)
{
struct phb *phb;
struct npu2_dev *dev;
for_each_phb(phb) {
if (phb->phb_type == phb_type_npu_v2_opencapi) {
dev = phb_to_npu2_dev_ocapi(phb);
if (dev->npu == npu &&
dev->brick_index == brick)
dev->flags |= NPU2_DEV_BROKEN;
}
}
}
static int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t __unused bdfn,
uint64_t addr, uint64_t PE_mask)
{
uint64_t stack, block, offset, reg;
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
int rc;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
/* 4k aligned */
if (addr & 0xFFF)
return OPAL_PARAMETER;
if (PE_mask > 15)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
block = index_to_block(dev->brick_index);
stack = index_to_stack(dev->brick_index);
if (block == NPU2_BLOCK_OTL1)
offset = NPU2_XSL_PSL_SPAP_A1;
else
offset = NPU2_XSL_PSL_SPAP_A0;
lock(&dev->npu->lock);
/*
* set the SPAP used by the device
*/
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, offset),
NPU2_MISC_DA_LEN_8B);
if ((addr && (reg & NPU2_XSL_PSL_SPAP_EN)) ||
(!addr && !(reg & NPU2_XSL_PSL_SPAP_EN))) {
rc = OPAL_BUSY;
goto out;
}
/* SPA is disabled by passing a NULL address */
reg = addr;
if (addr)
reg = addr | NPU2_XSL_PSL_SPAP_EN;
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, offset),
NPU2_MISC_DA_LEN_8B, reg);
/*
* set the PE mask that the OS uses for PASID -> PE handle
* conversion
*/
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG0(stack, block), NPU2_MISC_DA_LEN_8B);
reg &= ~NPU2_OTL_CONFIG0_PE_MASK;
reg |= (PE_mask << (63-7));
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG0(stack, block), NPU2_MISC_DA_LEN_8B,
reg);
rc = OPAL_SUCCESS;
out:
unlock(&dev->npu->lock);
return rc;
}
opal_call(OPAL_NPU_SPA_SETUP, opal_npu_spa_setup, 4);
static int64_t opal_npu_spa_clear_cache(uint64_t phb_id, uint32_t __unused bdfn,
uint64_t PE_handle)
{
uint64_t cc_inv, stack, block, reg, rc;
uint32_t retries = 5;
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
if (PE_handle > MAX_PE_HANDLE)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
block = index_to_block(dev->brick_index);
stack = index_to_stack(dev->brick_index);
cc_inv = NPU2_REG_OFFSET(stack, NPU2_BLOCK_XSL, NPU2_XSL_PSL_LLCMD_A0);
lock(&dev->npu->lock);
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base, cc_inv,
NPU2_MISC_DA_LEN_8B);
if (reg & PPC_BIT(16)) {
rc = OPAL_BUSY;
goto out;
}
reg = PE_handle | PPC_BIT(15);
if (block == NPU2_BLOCK_OTL1)
reg |= PPC_BIT(48);
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base, cc_inv,
NPU2_MISC_DA_LEN_8B, reg);
rc = OPAL_HARDWARE;
while (retries--) {
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
cc_inv, NPU2_MISC_DA_LEN_8B);
if (!(reg & PPC_BIT(16))) {
rc = OPAL_SUCCESS;
break;
}
/* the bit expected to flip in less than 200us */
time_wait_us(200);
}
out:
unlock(&dev->npu->lock);
return rc;
}
opal_call(OPAL_NPU_SPA_CLEAR_CACHE, opal_npu_spa_clear_cache, 3);
static int get_template_rate(unsigned int templ, char *rate_buf)
{
int shift, idx, val;
/*
* Each rate is encoded over 4 bits (0->15), with 15 being the
* slowest. The buffer is a succession of rates for all the
* templates. The first 4 bits are for template 63, followed
* by 4 bits for template 62, ... etc. So the rate for
* template 0 is at the very end of the buffer.
*/
idx = (TL_MAX_TEMPLATE - templ) / 2;
shift = 4 * (1 - ((TL_MAX_TEMPLATE - templ) % 2));
val = rate_buf[idx] >> shift;
return val;
}
static bool is_template_supported(unsigned int templ, long capabilities)
{
return !!(capabilities & (1ull << templ));
}
static int64_t opal_npu_tl_set(uint64_t phb_id, uint32_t __unused bdfn,
long capabilities, uint64_t rate_phys, int rate_sz)
{
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
uint64_t stack, block, reg, templ_rate;
int i, rate_pos;
char *rate = (char *) rate_phys;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
if (!opal_addr_valid(rate) || rate_sz != TL_RATE_BUF_SIZE)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
block = index_to_block(dev->brick_index);
stack = index_to_stack(dev->brick_index);
/*
* The 'capabilities' argument defines what TL template the
* device can receive. OpenCAPI 3.0 and 4.0 define 64 templates, so
* that's one bit per template.
*
* For each template, the device processing time may vary, so
* the device advertises at what rate a message of a given
* template can be sent. That's encoded in the 'rate' buffer.
*
* On P9, NPU only knows about TL templates 0 -> 3.
* Per the spec, template 0 must be supported.
*/
if (!is_template_supported(0, capabilities))
return OPAL_PARAMETER;
reg = npu2_scom_read(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG1(stack, block),
NPU2_MISC_DA_LEN_8B);
reg &= ~(NPU2_OTL_CONFIG1_TX_TEMP1_EN | NPU2_OTL_CONFIG1_TX_TEMP2_EN |
NPU2_OTL_CONFIG1_TX_TEMP3_EN);
for (i = 0; i < 4; i++) {
/* Skip template 0 as it is implicitly enabled */
if (i && is_template_supported(i, capabilities))
reg |= PPC_BIT(i);
/* The tx rate should still be set for template 0 */
templ_rate = get_template_rate(i, rate);
rate_pos = 8 + i * 4;
reg = SETFIELD(PPC_BITMASK(rate_pos, rate_pos + 3), reg,
templ_rate);
}
npu2_scom_write(dev->npu->chip_id, dev->npu->xscom_base,
NPU2_OTL_CONFIG1(stack, block), NPU2_MISC_DA_LEN_8B,
reg);
OCAPIDBG(dev, "OTL configuration 1 register set to %llx\n", reg);
return OPAL_SUCCESS;
}
opal_call(OPAL_NPU_TL_SET, opal_npu_tl_set, 5);
static void set_mem_bar(struct npu2_dev *dev, uint64_t base, uint64_t size)
{
uint64_t stack, val, reg, bar_offset, pa_config_offset;
uint8_t memsel;
stack = index_to_stack(dev->brick_index);
switch (dev->brick_index) {
case 2:
case 4:
bar_offset = NPU2_GPU0_MEM_BAR;
pa_config_offset = NPU2_CQ_CTL_MISC_PA0_CONFIG;
break;
case 3:
case 5:
bar_offset = NPU2_GPU1_MEM_BAR;
pa_config_offset = NPU2_CQ_CTL_MISC_PA1_CONFIG;
break;
default:
assert(false);
}
assert((!size && !base) || (size && base));
/*
* Memory select configuration:
* - 0b000 - BAR disabled
* - 0b001 - match 0b00, 0b01
* - 0b010 - match 0b01, 0b10
* - 0b011 - match 0b00, 0b10
* - 0b100 - match 0b00
* - 0b101 - match 0b01
* - 0b110 - match 0b10
* - 0b111 - match 0b00, 0b01, 0b10
*/
memsel = GETFIELD(PPC_BITMASK(13, 14), base);
if (size)
val = SETFIELD(NPU2_MEM_BAR_EN | NPU2_MEM_BAR_SEL_MEM, 0ULL, 0b100 + memsel);
else
val = 0;
/* Base address - 12 bits, 1G aligned */
val = SETFIELD(NPU2_MEM_BAR_NODE_ADDR, val, GETFIELD(PPC_BITMASK(22, 33), base));
/* GCID */
val = SETFIELD(NPU2_MEM_BAR_GROUP, val, GETFIELD(PPC_BITMASK(15, 18), base));
val = SETFIELD(NPU2_MEM_BAR_CHIP, val, GETFIELD(PPC_BITMASK(19, 21), base));
/* Other settings */
val = SETFIELD(NPU2_MEM_BAR_POISON, val, 1);
val = SETFIELD(NPU2_MEM_BAR_GRANULE, val, 0);
val = SETFIELD(NPU2_MEM_BAR_BAR_SIZE, val, ilog2(size >> 30));
val = SETFIELD(NPU2_MEM_BAR_MODE, val, 0);
for (int block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
reg = NPU2_REG_OFFSET(stack, block, bar_offset);
npu2_write(dev->npu, reg, val);
}
/* Set PA config */
if (size)
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_MEMSELMATCH, 0ULL, 0b100 + memsel);
else
val = 0;
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_GRANULE, val, 0);
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_SIZE, val, ilog2(size >> 30));
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_MODE, val, 0);
val = SETFIELD(NPU2_CQ_CTL_MISC_PA_CONFIG_MASK, val, 0);
reg = NPU2_REG_OFFSET(stack, NPU2_BLOCK_CTL, pa_config_offset);
npu2_write(dev->npu, reg, val);
}
static int64_t alloc_mem_bar(struct npu2_dev *dev, uint64_t size, uint64_t *bar)
{
uint64_t phys_map_base, phys_map_size;
int rc = OPAL_SUCCESS;
lock(&dev->npu->lock);
/*
* Right now, we support 1 allocation per chip, of up to 4TB.
*
* In future, we will use chip address extension to support
* >4TB ranges, and we will implement a more sophisticated
* allocator to allow an allocation for every link on a chip.
*/
if (dev->npu->lpc_mem_allocated) {
rc = OPAL_RESOURCE;
goto out;
}
phys_map_get(dev->npu->chip_id, OCAPI_MEM, 0, &phys_map_base, &phys_map_size);
if (size > phys_map_size) {
/**
* @fwts-label OCAPIInvalidLPCMemoryBARSize
* @fwts-advice The operating system requested an unsupported
* amount of OpenCAPI LPC memory. This is possibly a kernel
* bug, or you may need to upgrade your firmware.
*/
OCAPIERR(dev, "Invalid LPC memory BAR allocation size requested: 0x%llx bytes (limit 0x%llx)\n",
size, phys_map_size);
rc = OPAL_PARAMETER;
goto out;
}
/* Minimum BAR size is 1 GB */
if (size < (1 << 30)) {
size = 1 << 30;
}
if (!is_pow2(size)) {
size = 1 << (ilog2(size) + 1);
}
set_mem_bar(dev, phys_map_base, size);
*bar = phys_map_base;
dev->npu->lpc_mem_allocated = dev;
out:
unlock(&dev->npu->lock);
return rc;
}
static int64_t release_mem_bar(struct npu2_dev *dev)
{
int rc = OPAL_SUCCESS;
lock(&dev->npu->lock);
if (dev->npu->lpc_mem_allocated != dev) {
rc = OPAL_PARAMETER;
goto out;
}
set_mem_bar(dev, 0, 0);
dev->npu->lpc_mem_allocated = NULL;
out:
unlock(&dev->npu->lock);
return rc;
}
static int64_t opal_npu_mem_alloc(uint64_t phb_id, uint32_t __unused bdfn,
uint64_t size, uint64_t *bar)
{
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
if (!opal_addr_valid(bar))
return OPAL_PARAMETER;
return alloc_mem_bar(dev, size, bar);
}
opal_call(OPAL_NPU_MEM_ALLOC, opal_npu_mem_alloc, 4);
static int64_t opal_npu_mem_release(uint64_t phb_id, uint32_t __unused bdfn)
{
struct phb *phb = pci_get_phb(phb_id);
struct npu2_dev *dev;
if (!phb || phb->phb_type != phb_type_npu_v2_opencapi)
return OPAL_PARAMETER;
dev = phb_to_npu2_dev_ocapi(phb);
if (!dev)
return OPAL_PARAMETER;
return release_mem_bar(dev);
}
opal_call(OPAL_NPU_MEM_RELEASE, opal_npu_mem_release, 2);
|