floppy: Fix accesses to DOR register.

The DOR register is a write-only register (even though QEMU and at
least some real hardware permit read/write acess).  So, do not read
from the DOR port.  Introduce a VARLOW variable (FloppyDOR) to store
the current state.

When resetting the controller, make sure to enable both the controller
and interrupts.  Also, make sure the controller is really reset (by
writing a 0 to DOR first) to ensure an IRQ is received on reset.

Also, add some additional dprintf statements to the floppy init path.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 20 insertions, 7 deletions

diff --git a/src/hw/floppy.c b/src/hw/floppy.c
index c5118ec..48958e6 100644
--- a/src/hw/floppy.c
+++ b/src/hw/floppy.c
@@ -180,10 +180,20 @@ find_floppy_type(u32 size)
  * Low-level floppy IO
  ****************************************************************/
 
+u8 FloppyDOR VARLOW;
+
+static inline void
+floppy_dor_write(u8 val)
+{
+    outb(val, PORT_FD_DOR);
+    SET_LOW(FloppyDOR, val);
+}
+
 static void
 floppy_disable_controller(void)
 {
-    outb(inb(PORT_FD_DOR) & ~0x04, PORT_FD_DOR);
+    dprintf(2, "Floppy_disable_controller\n");
+    floppy_dor_write(0x00);
 }
 
 static int
@@ -276,7 +286,9 @@ floppy_pio(struct floppy_pio_s *pio)
 static int
 floppy_enable_controller(void)
 {
-    outb(inb(PORT_FD_DOR) | 0x04, PORT_FD_DOR);
+    dprintf(2, "Floppy_enable_controller\n");
+    floppy_dor_write(0x00);
+    floppy_dor_write(0x0c);
     int ret = floppy_wait_irq();
     if (ret)
         return ret;
@@ -296,16 +308,14 @@ floppy_select_drive(u8 floppyid)
     SET_BDA(floppy_motor_counter, FLOPPY_MOTOR_TICKS);
 
     // Enable controller if it isn't running.
-    u8 dor = inb(PORT_FD_DOR);
-    if (!(dor & 0x04)) {
+    if (!(GET_LOW(FloppyDOR) & 0x04)) {
         int ret = floppy_enable_controller();
         if (ret)
             return ret;
     }
 
     // Turn on motor of selected drive, DMA & int enabled, normal operation
-    dor = (floppyid ? 0x20 : 0x10) | 0x0c | floppyid;
-    outb(dor, PORT_FD_DOR);
+    floppy_dor_write((floppyid ? 0x20 : 0x10) | 0x0c | floppyid);
 
     return DISK_RET_SUCCESS;
 }
@@ -324,6 +334,7 @@ set_diskette_current_cyl(u8 floppyid, u8 cyl)
 static int
 floppy_drive_recal(u8 floppyid)
 {
+    dprintf(2, "Floppy_drive_recal %d\n", floppyid);
     int ret = floppy_select_drive(floppyid);
     if (ret)
         return ret;
@@ -407,6 +418,8 @@ floppy_media_sense(struct drive_s *drive_gf)
                 break;
         }
     }
+    dprintf(2, "Floppy_media_sense on drive %d found rate %d\n"
+            , floppyid, data_rate);
 
     u8 old_data_rate = GET_BDA(floppy_media_state[floppyid]) >> 6;
     SET_BDA(floppy_last_data_rate, (old_data_rate<<2) | (data_rate<<6));
@@ -680,6 +693,6 @@ floppy_tick(void)
         SET_BDA(floppy_motor_counter, fcount);
         if (fcount == 0)
             // turn motor(s) off
-            outb(inb(PORT_FD_DOR) & 0xcf, PORT_FD_DOR);
+            floppy_dor_write(GET_LOW(FloppyDOR) & ~0xf0);
     }
 }