diff options
-rw-r--r-- | Makefile | 2 | ||||
-rw-r--r-- | src/ahci.c | 480 | ||||
-rw-r--r-- | src/ahci.h | 196 | ||||
-rw-r--r-- | src/block.c | 3 | ||||
-rw-r--r-- | src/blockcmd.c | 3 | ||||
-rw-r--r-- | src/config.h | 2 | ||||
-rw-r--r-- | src/disk.h | 1 | ||||
-rw-r--r-- | src/post.c | 2 |
8 files changed, 688 insertions, 1 deletions
@@ -15,7 +15,7 @@ SRCBOTH=misc.c pmm.c stacks.c output.c util.c block.c floppy.c ata.c mouse.c \ kbd.c pci.c serial.c clock.c pic.c cdrom.c ps2port.c smp.c resume.c \ pnpbios.c pirtable.c vgahooks.c ramdisk.c pcibios.c blockcmd.c \ usb.c usb-uhci.c usb-ohci.c usb-ehci.c usb-hid.c usb-msc.c \ - virtio-ring.c virtio-pci.c virtio-blk.c apm.c + virtio-ring.c virtio-pci.c virtio-blk.c apm.c ahci.c SRC16=$(SRCBOTH) system.c disk.c font.c SRC32FLAT=$(SRCBOTH) post.c shadow.c memmap.c coreboot.c boot.c \ acpi.c smm.c mptable.c smbios.c pciinit.c optionroms.c mtrr.c \ diff --git a/src/ahci.c b/src/ahci.c new file mode 100644 index 0000000..ee404d4 --- /dev/null +++ b/src/ahci.c @@ -0,0 +1,480 @@ +// Low level AHCI disk access +// +// Copyright (C) 2010 Gerd Hoffmann <kraxel@redhat.com> +// +// This file may be distributed under the terms of the GNU LGPLv3 license. + +#include "types.h" // u8 +#include "ioport.h" // inb +#include "util.h" // dprintf +#include "biosvar.h" // GET_EBDA +#include "pci.h" // foreachpci +#include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER +#include "pci_regs.h" // PCI_INTERRUPT_LINE +#include "boot.h" // add_bcv_hd +#include "disk.h" // struct ata_s +#include "ata.h" // ATA_CB_STAT +#include "ahci.h" // CDB_CMD_READ_10 +#include "blockcmd.h" // CDB_CMD_READ_10 + +#define AHCI_MAX_RETRIES 5 + +/**************************************************************** + * these bits must run in both 16bit and 32bit modes + ****************************************************************/ + +// prepare sata command fis +static void sata_prep_simple(struct sata_cmd_fis *fis, u8 command) +{ + memset_fl(fis, 0, sizeof(*fis)); + SET_FLATPTR(fis->command, command); +} + +static void sata_prep_readwrite(struct sata_cmd_fis *fis, + struct disk_op_s *op, int iswrite) +{ + u64 lba = op->lba; + u8 command; + + memset_fl(fis, 0, sizeof(*fis)); + + if (op->count >= (1<<8) || lba + op->count >= (1<<28)) { + SET_FLATPTR(fis->sector_count2, op->count >> 8); + SET_FLATPTR(fis->lba_low2, lba >> 24); + SET_FLATPTR(fis->lba_mid2, lba >> 32); + SET_FLATPTR(fis->lba_high2, lba >> 40); + lba &= 0xffffff; + command = (iswrite ? ATA_CMD_WRITE_DMA_EXT + : ATA_CMD_READ_DMA_EXT); + } else { + command = (iswrite ? ATA_CMD_WRITE_DMA + : ATA_CMD_READ_DMA); + } + SET_FLATPTR(fis->command, command); + SET_FLATPTR(fis->sector_count, op->count); + SET_FLATPTR(fis->lba_low, lba); + SET_FLATPTR(fis->lba_mid, lba >> 8); + SET_FLATPTR(fis->lba_high, lba >> 16); + SET_FLATPTR(fis->device, ((lba >> 24) & 0xf) | ATA_CB_DH_LBA); +} + +static void sata_prep_atapi(struct sata_cmd_fis *fis, u16 blocksize) +{ + memset_fl(fis, 0, sizeof(*fis)); + SET_FLATPTR(fis->command, ATA_CMD_PACKET); + SET_FLATPTR(fis->lba_mid, blocksize); + SET_FLATPTR(fis->lba_high, blocksize >> 8); +} + +// ahci register access helpers +static u32 ahci_ctrl_readl(struct ahci_ctrl_s *ctrl, u32 reg) +{ + u32 addr = GET_GLOBALFLAT(ctrl->iobase) + reg; + return pci_readl(addr); +} + +static void ahci_ctrl_writel(struct ahci_ctrl_s *ctrl, u32 reg, u32 val) +{ + u32 addr = GET_GLOBALFLAT(ctrl->iobase) + reg; + pci_writel(addr, val); +} + +static u32 ahci_port_to_ctrl(u32 pnr, u32 port_reg) +{ + u32 ctrl_reg = 0x100; + ctrl_reg += pnr * 0x80; + ctrl_reg += port_reg; + return ctrl_reg; +} + +static u32 ahci_port_readl(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg) +{ + u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); + return ahci_ctrl_readl(ctrl, ctrl_reg); +} + +static void ahci_port_writel(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg, u32 val) +{ + u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); + ahci_ctrl_writel(ctrl, ctrl_reg, val); +} + +// submit ahci command + wait for result +static int ahci_command(struct ahci_port_s *port, int iswrite, int isatapi, + void *buffer, u32 bsize) +{ + u32 val, status, success, flags; + struct ahci_ctrl_s *ctrl = GET_GLOBAL(port->ctrl); + struct ahci_cmd_s *cmd = GET_GLOBAL(port->cmd); + struct ahci_fis_s *fis = GET_GLOBAL(port->fis); + struct ahci_list_s *list = GET_GLOBAL(port->list); + u32 pnr = GET_GLOBAL(port->pnr); + + SET_FLATPTR(cmd->fis.reg, 0x27); + SET_FLATPTR(cmd->fis.pmp_type, (1 << 7)); /* cmd fis */ + SET_FLATPTR(cmd->prdt[0].base, ((u32)buffer)); + SET_FLATPTR(cmd->prdt[0].baseu, 0); + SET_FLATPTR(cmd->prdt[0].flags, bsize-1); + + val = ahci_port_readl(ctrl, pnr, PORT_CMD); + ahci_port_writel(ctrl, pnr, PORT_CMD, val | PORT_CMD_START); + + if (ahci_port_readl(ctrl, pnr, PORT_CMD_ISSUE)) + return -1; + + flags = ((1 << 16) | /* one prd entry */ + (1 << 10) | /* clear busy on ok */ + (iswrite ? (1 << 6) : 0) | + (isatapi ? (1 << 5) : 0) | + (4 << 0)); /* fis length (dwords) */ + SET_FLATPTR(list[0].flags, flags); + SET_FLATPTR(list[0].bytes, bsize); + SET_FLATPTR(list[0].base, ((u32)(cmd))); + SET_FLATPTR(list[0].baseu, 0); + + dprintf(2, "AHCI/%d: send cmd ...\n", pnr); + SET_FLATPTR(fis->rfis[2], 0); + ahci_port_writel(ctrl, pnr, PORT_SCR_ACT, 1); + ahci_port_writel(ctrl, pnr, PORT_CMD_ISSUE, 1); + while (ahci_port_readl(ctrl, pnr, PORT_CMD_ISSUE)) { + yield(); + } + while ((status = GET_FLATPTR(fis->rfis[2])) == 0) { + yield(); + } + + success = (0x00 == (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | + ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR)) && + ATA_CB_STAT_RDY == (status & (ATA_CB_STAT_RDY))); + dprintf(2, "AHCI/%d: ... finished, status 0x%x, %s\n", pnr, + status, success ? "OK" : "ERROR"); + return success ? 0 : -1; +} + +#define CDROM_CDB_SIZE 12 + +int ahci_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) +{ + struct ahci_port_s *port = container_of( + op->drive_g, struct ahci_port_s, drive); + struct ahci_cmd_s *cmd = GET_GLOBAL(port->cmd); + u8 *atapi = cdbcmd; + int i, rc; + + sata_prep_atapi(&cmd->fis, blocksize); + for (i = 0; i < CDROM_CDB_SIZE; i++) { + SET_FLATPTR(cmd->atapi[i], atapi[i]); + } + rc = ahci_command(port, 0, 1, op->buf_fl, + op->count * blocksize); + if (rc < 0) + return DISK_RET_EBADTRACK; + return DISK_RET_SUCCESS; +} + +// read/write count blocks from a harddrive. +static int +ahci_disk_readwrite(struct disk_op_s *op, int iswrite) +{ + struct ahci_port_s *port = container_of( + op->drive_g, struct ahci_port_s, drive); + struct ahci_cmd_s *cmd = GET_GLOBAL(port->cmd); + int rc; + + sata_prep_readwrite(&cmd->fis, op, iswrite); + rc = ahci_command(port, iswrite, 0, op->buf_fl, + op->count * DISK_SECTOR_SIZE); + dprintf(2, "ahci disk %s, lba %6x, count %3x, buf %p, rc %d\n", + iswrite ? "write" : "read", (u32)op->lba, op->count, op->buf_fl, rc); + if (rc < 0) + return DISK_RET_EBADTRACK; + return DISK_RET_SUCCESS; +} + +// command demuxer +int process_ahci_op(struct disk_op_s *op) +{ + struct ahci_port_s *port; + u32 atapi; + + if (!CONFIG_AHCI) + return 0; + + port = container_of(op->drive_g, struct ahci_port_s, drive); + atapi = GET_GLOBAL(port->atapi); + + if (atapi) { + switch (op->command) { + case CMD_READ: + return cdb_read(op); + case CMD_WRITE: + case CMD_FORMAT: + return DISK_RET_EWRITEPROTECT; + case CMD_RESET: + /* FIXME: what should we do here? */ + case CMD_VERIFY: + case CMD_SEEK: + return DISK_RET_SUCCESS; + default: + dprintf(1, "AHCI: unknown cdrom command %d\n", op->command); + op->count = 0; + return DISK_RET_EPARAM; + } + } else { + switch (op->command) { + case CMD_READ: + return ahci_disk_readwrite(op, 0); + case CMD_WRITE: + return ahci_disk_readwrite(op, 1); + case CMD_RESET: + /* FIXME: what should we do here? */ + case CMD_FORMAT: + case CMD_VERIFY: + case CMD_SEEK: + return DISK_RET_SUCCESS; + default: + dprintf(1, "AHCI: unknown disk command %d\n", op->command); + op->count = 0; + return DISK_RET_EPARAM; + } + } +} + +/**************************************************************** + * everything below is pure 32bit code + ****************************************************************/ + +static void +ahci_port_reset(struct ahci_ctrl_s *ctrl, u32 pnr) +{ + u32 val, count = 0; + + /* disable FIS + CMD */ + val = ahci_port_readl(ctrl, pnr, PORT_CMD); + while (val & (PORT_CMD_FIS_RX | PORT_CMD_START | + PORT_CMD_FIS_ON | PORT_CMD_LIST_ON) && + count < AHCI_MAX_RETRIES) { + val &= ~(PORT_CMD_FIS_RX | PORT_CMD_START); + ahci_port_writel(ctrl, pnr, PORT_CMD, val); + ndelay(500); + val = ahci_port_readl(ctrl, pnr, PORT_CMD); + count++; + } + + /* clear status */ + val = ahci_port_readl(ctrl, pnr, PORT_SCR_ERR); + if (val) + ahci_port_writel(ctrl, pnr, PORT_SCR_ERR, val); + + /* disable + clear IRQs */ + ahci_port_writel(ctrl, pnr, PORT_IRQ_MASK, val); + val = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); + if (val) + ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, val); +} + +static int +ahci_port_probe(struct ahci_ctrl_s *ctrl, u32 pnr) +{ + u32 val, count = 0; + + val = ahci_port_readl(ctrl, pnr, PORT_TFDATA); + while (val & ((1 << 7) /* BSY */ | + (1 << 3) /* DRQ */)) { + ndelay(500); + val = ahci_port_readl(ctrl, pnr, PORT_TFDATA); + count++; + if (count >= AHCI_MAX_RETRIES) + return -1; + } + + val = ahci_port_readl(ctrl, pnr, PORT_SCR_STAT); + if ((val & 0x07) != 0x03) + return -1; + return 0; +} + +#define MAXMODEL 40 + +static struct ahci_port_s* +ahci_port_init(struct ahci_ctrl_s *ctrl, u32 pnr) +{ + struct ahci_port_s *port = malloc_fseg(sizeof(*port)); + char model[MAXMODEL+1]; + u16 buffer[256]; + u32 val; + int rc; + + if (!port) { + warn_noalloc(); + return NULL; + } + port->pnr = pnr; + port->ctrl = ctrl; + port->list = memalign_low(1024, 1024); + port->fis = memalign_low(256, 256); + port->cmd = memalign_low(256, 256); + if (port->list == NULL || port->fis == NULL || port->cmd == NULL) { + warn_noalloc(); + return NULL; + } + memset(port->list, 0, 1024); + memset(port->fis, 0, 256); + memset(port->cmd, 0, 256); + + ahci_port_writel(ctrl, pnr, PORT_LST_ADDR, (u32)port->list); + ahci_port_writel(ctrl, pnr, PORT_FIS_ADDR, (u32)port->fis); + val = ahci_port_readl(ctrl, pnr, PORT_CMD); + ahci_port_writel(ctrl, pnr, PORT_CMD, val | PORT_CMD_FIS_RX); + + sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_PACKET_DEVICE); + rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); + if (rc == 0) { + port->atapi = 1; + } else { + port->atapi = 0; + sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_DEVICE); + rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); + if (rc < 0) + goto err; + } + + port->drive.type = DTYPE_AHCI; + port->drive.removable = (buffer[0] & 0x80) ? 1 : 0; + port->drive.desc = malloc_tmp(MAXDESCSIZE); + if (!port->drive.desc) { + warn_noalloc(); + return NULL; + } + + if (!port->atapi) { + // found disk (ata) + port->drive.blksize = DISK_SECTOR_SIZE; + port->drive.pchs.cylinders = buffer[1]; + port->drive.pchs.heads = buffer[3]; + port->drive.pchs.spt = buffer[6]; + + u64 sectors; + if (buffer[83] & (1 << 10)) // word 83 - lba48 support + sectors = *(u64*)&buffer[100]; // word 100-103 + else + sectors = *(u32*)&buffer[60]; // word 60 and word 61 + port->drive.sectors = sectors; + u64 adjsize = sectors >> 11; + char adjprefix = 'M'; + if (adjsize >= (1 << 16)) { + adjsize >>= 10; + adjprefix = 'G'; + } + snprintf(port->drive.desc, MAXDESCSIZE + , "AHCI/%d: %s ATA-%d Hard-Disk (%u %ciBytes)" + , port->pnr + , ata_extract_model(model, MAXMODEL, buffer) + , ata_extract_version(buffer) + , (u32)adjsize, adjprefix); + + // Setup disk geometry translation. + setup_translation(&port->drive); + // Register with bcv system. + add_bcv_internal(&port->drive); + } else { + // found cdrom (atapi) + port->drive.blksize = CDROM_SECTOR_SIZE; + port->drive.sectors = (u64)-1; + u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05; + snprintf(port->drive.desc, MAXDESCSIZE, "AHCI/%d: %s ATAPI-%d %s" + , port->pnr + , ata_extract_model(model, MAXMODEL, buffer) + , ata_extract_version(buffer) + , (iscd ? "DVD/CD" : "Device")); + + // fill cdidmap + if (iscd) + map_cd_drive(&port->drive); + } + dprintf(1, "%s\n", port->drive.desc); + + return port; + +err: + dprintf(1, "AHCI/%d: init failure, reset\n", port->pnr); + ahci_port_reset(ctrl, pnr); + return NULL; +} + +// Detect any drives attached to a given controller. +static void +ahci_detect(void *data) +{ + struct ahci_ctrl_s *ctrl = data; + struct ahci_port_s *port; + u32 pnr, max; + int rc; + + max = ctrl->caps & 0x1f; + for (pnr = 0; pnr < max; pnr++) { + if (!(ctrl->ports & (1 << pnr))) + continue; + dprintf(2, "AHCI/%d: probing\n", pnr); + ahci_port_reset(ctrl, pnr); + rc = ahci_port_probe(ctrl, pnr); + dprintf(1, "AHCI/%d: link %s\n", pnr, rc == 0 ? "up" : "down"); + if (rc != 0) + continue; + port = ahci_port_init(ctrl, pnr); + } +} + +// Initialize an ata controller and detect its drives. +static void +ahci_init_controller(int bdf) +{ + struct ahci_ctrl_s *ctrl = malloc_fseg(sizeof(*ctrl)); + u32 val; + + if (!ctrl) { + warn_noalloc(); + return; + } + ctrl->pci_bdf = bdf; + ctrl->iobase = pci_config_readl(bdf, PCI_BASE_ADDRESS_5); + ctrl->irq = pci_config_readb(bdf, PCI_INTERRUPT_LINE); + dprintf(1, "AHCI controller at %02x.%x, iobase %x, irq %d\n", + bdf >> 3, bdf & 7, ctrl->iobase, ctrl->irq); + + val = ahci_ctrl_readl(ctrl, HOST_CTL); + ahci_ctrl_writel(ctrl, HOST_CTL, val | HOST_CTL_AHCI_EN); + + ctrl->caps = ahci_ctrl_readl(ctrl, HOST_CAP); + ctrl->ports = ahci_ctrl_readl(ctrl, HOST_PORTS_IMPL); + dprintf(2, "AHCI: cap 0x%x, ports_impl 0x%x\n", + ctrl->caps, ctrl->ports); + + run_thread(ahci_detect, ctrl); +} + +// Locate and init ahci controllers. +static void +ahci_init(void) +{ + // Scan PCI bus for ATA adapters + int bdf, max; + foreachpci(bdf, max) { + if (pci_config_readw(bdf, PCI_CLASS_DEVICE) != PCI_CLASS_STORAGE_SATA) + continue; + if (pci_config_readb(bdf, PCI_CLASS_PROG) != 1 /* AHCI rev 1 */) + continue; + ahci_init_controller(bdf); + } +} + +void +ahci_setup(void) +{ + ASSERT32FLAT(); + if (!CONFIG_AHCI) + return; + + dprintf(3, "init ahci\n"); + ahci_init(); +} diff --git a/src/ahci.h b/src/ahci.h new file mode 100644 index 0000000..0e13e00 --- /dev/null +++ b/src/ahci.h @@ -0,0 +1,196 @@ +#ifndef __AHCI_H +#define __AHCI_H + +struct sata_cmd_fis { + u8 reg; + u8 pmp_type; + u8 command; + u8 feature; + + u8 lba_low; + u8 lba_mid; + u8 lba_high; + u8 device; + + u8 lba_low2; + u8 lba_mid2; + u8 lba_high2; + u8 feature2; + + u8 sector_count; + u8 sector_count2; + u8 res_1; + u8 control; + + u8 res_2[64 - 16]; +}; + +struct ahci_ctrl_s { + int pci_bdf; + u8 irq; + u32 iobase; + u32 caps; + u32 ports; +}; + +struct ahci_cmd_s { + struct sata_cmd_fis fis; + u8 atapi[0x20]; + u8 res[0x20]; + struct { + u32 base; + u32 baseu; + u32 res; + u32 flags; + } prdt[]; +}; + +/* command list */ +struct ahci_list_s { + u32 flags; + u32 bytes; + u32 base; + u32 baseu; + u32 res[4]; +}; + +struct ahci_fis_s { + u8 dsfis[0x1c]; /* dma setup */ + u8 res_1[0x04]; + u8 psfis[0x14]; /* pio setup */ + u8 res_2[0x0c]; + u8 rfis[0x14]; /* d2h register */ + u8 res_3[0x04]; + u8 sdbfis[0x08]; /* set device bits */ + u8 ufis[0x40]; /* unknown */ + u8 res_4[0x60]; +}; + +struct ahci_port_s { + struct drive_s drive; + struct ahci_ctrl_s *ctrl; + struct ahci_list_s *list; + struct ahci_fis_s *fis; + struct ahci_cmd_s *cmd; + u32 pnr; + u32 atapi; +}; + +void ahci_setup(void); +int process_ahci_op(struct disk_op_s *op); +int ahci_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize); + +#define AHCI_IRQ_ON_SG (1 << 31) +#define AHCI_CMD_ATAPI (1 << 5) +#define AHCI_CMD_WRITE (1 << 6) +#define AHCI_CMD_PREFETCH (1 << 7) +#define AHCI_CMD_RESET (1 << 8) +#define AHCI_CMD_CLR_BUSY (1 << 10) + +#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ +#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ +#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ + +/* global controller registers */ +#define HOST_CAP 0x00 /* host capabilities */ +#define HOST_CTL 0x04 /* global host control */ +#define HOST_IRQ_STAT 0x08 /* interrupt status */ +#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ +#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ + +/* HOST_CTL bits */ +#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ +#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ +#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */ + +/* HOST_CAP bits */ +#define HOST_CAP_SSC (1 << 14) /* Slumber capable */ +#define HOST_CAP_AHCI (1 << 18) /* AHCI only */ +#define HOST_CAP_CLO (1 << 24) /* Command List Override support */ +#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ +#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ +#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */ + +/* registers for each SATA port */ +#define PORT_LST_ADDR 0x00 /* command list DMA addr */ +#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ +#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ +#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ +#define PORT_IRQ_STAT 0x10 /* interrupt status */ +#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ +#define PORT_CMD 0x18 /* port command */ +#define PORT_TFDATA 0x20 /* taskfile data */ +#define PORT_SIG 0x24 /* device TF signature */ +#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ +#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ +#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ +#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ +#define PORT_CMD_ISSUE 0x38 /* command issue */ +#define PORT_RESERVED 0x3c /* reserved */ + +/* PORT_IRQ_{STAT,MASK} bits */ +#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */ +#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ +#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ +#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ +#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ +#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ +#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ +#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ + +#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ +#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ +#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ +#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ +#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ +#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ +#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ +#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ +#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ + +#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ + PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ + PORT_IRQ_UNK_FIS) +#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ + PORT_IRQ_HBUS_DATA_ERR) +#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) + +/* PORT_CMD bits */ +#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ +#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ +#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ +#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ +#define PORT_CMD_CLO (1 << 3) /* Command list override */ +#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ +#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ +#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ + +#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */ +#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ +#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ +#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ + +#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */ +#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */ +#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */ +#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */ +#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */ +#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */ +#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */ +#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence + Status */ +#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */ +#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier + Status */ +#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */ +#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error + Status */ +#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */ +#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */ +#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */ +#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */ +#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */ + +#endif // ahci.h diff --git a/src/block.c b/src/block.c index 3f4b13f..818c9f9 100644 --- a/src/block.c +++ b/src/block.c @@ -10,6 +10,7 @@ #include "cmos.h" // inb_cmos #include "util.h" // dprintf #include "ata.h" // process_ata_op +#include "ahci.h" // process_ahci_op #include "usb-msc.h" // process_usb_op #include "virtio-blk.h" // process_virtio_op @@ -292,6 +293,8 @@ process_op(struct disk_op_s *op) return process_usb_op(op); case DTYPE_VIRTIO: return process_virtio_op(op); + case DTYPE_AHCI: + return process_ahci_op(op); default: op->count = 0; return DISK_RET_EPARAM; diff --git a/src/blockcmd.c b/src/blockcmd.c index 48568e6..c9c6845 100644 --- a/src/blockcmd.c +++ b/src/blockcmd.c @@ -10,6 +10,7 @@ #include "disk.h" // struct disk_op_s #include "blockcmd.h" // struct cdb_request_sense #include "ata.h" // atapi_cmd_data +#include "ahci.h" // atapi_cmd_data #include "usb-msc.h" // usb_cmd_data // Route command to low-level handler. @@ -22,6 +23,8 @@ cdb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) return atapi_cmd_data(op, cdbcmd, blocksize); case DTYPE_USB: return usb_cmd_data(op, cdbcmd, blocksize); + case DTYPE_AHCI: + return ahci_cmd_data(op, cdbcmd, blocksize); default: op->count = 0; return DISK_RET_EPARAM; diff --git a/src/config.h b/src/config.h index f9bf3b8..db3e578 100644 --- a/src/config.h +++ b/src/config.h @@ -56,6 +56,8 @@ #define CONFIG_ATA_DMA 0 // Use 32bit PIO accesses on ATA (minor optimization on PCI transfers) #define CONFIG_ATA_PIO32 0 +// Support for AHCI disk code +#define CONFIG_AHCI 0 // Support for booting from a CD #define CONFIG_CDROM_BOOT 1 // Support for emulating a boot CD as a floppy/harddrive @@ -198,6 +198,7 @@ struct drive_s { #define DTYPE_CDEMU 0x05 #define DTYPE_USB 0x06 #define DTYPE_VIRTIO 0x07 +#define DTYPE_AHCI 0x08 #define MAXDESCSIZE 80 @@ -12,6 +12,7 @@ #include "biosvar.h" // struct bios_data_area_s #include "disk.h" // floppy_drive_setup #include "ata.h" // ata_setup +#include "ahci.h" // ahci_setup #include "memmap.h" // add_e820 #include "pic.h" // pic_setup #include "pci.h" // create_pirtable @@ -178,6 +179,7 @@ init_hw(void) floppy_setup(); ata_setup(); + ahci_setup(); ramdisk_setup(); virtio_blk_setup(); } |