| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Retain a reference to the cached DHCPACK until the late startup phase,
and allow it to be recycled for reuse. This allows the cached DHCPACK
to be used for a temporary MNP network device and then subsequently
reused for the corresponding real network device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
An MNP network device may be temporarily and non-destructively
installed on top of an existing UEFI network stack without having to
disconnect existing drivers.
Add the ability to create such a temporary network device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
We want exclusive access to the network device, both for performance
reasons and because we perform operations such as EAPoL that affect
the entire link. We currently drive the network card via either a
native hardware driver or via the SNP or NII/UNDI interfaces, both of
which grant us this exclusive access.
Add an alternative driver that drives the network card non-exclusively
via the EFI_MANAGED_NETWORK_PROTOCOL interface. This can function as
a fallback for situations where neither SNP nor NII/UNDI interfaces
are functional, and also opens up the possibility of non-destructively
installing a temporary network device over which to download the
autoexec.ipxe script.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Commit 4c5b794 ("[efi] Use the SNP protocol instance to match the SNP
chainloading device") switched the chainloaded device matching logic
to use a target protocol instance rather than the loaded image's
device handle, on the basis that we want to bind to the parent SNP
device rather than to a duplicate SNP protocol instance installed onto
an IPv4 or IPv6 child device handle.
It is possible that our calls to DisconnectController() and
ConnectController() will cause the target protocol instance to be
uninstalled and reinstalled, which may change the value of the
protocol instance pointer. Allow for this by identifying and matching
against the uppermost handle that initially has this target protocol
instance installed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The Mellanox/Nvidia UEFI driver is built from the same codebase as the
iPXE driver, and appears to contain the bug that was fixed in commit
c11734e ("[golan] Use ETH_HLEN for inline header size"). This results
in identical failures when using the SNP or NII interface (via
e.g. snponly.efi) to drive a Mellanox card while EAPoL is enabled.
Work around the underlying UEFI driver bug by padding transmit I/O
buffers to the minimum Ethernet frame length before passing them to
the underlying driver's transmit function.
This padding is not technically necessary, since almost all modern
hardware will insert transmit padding as necessary (and where the
hardware does not support doing so, the underlying UEFI driver is
responsible for adding any necessary padding). However, it is
guaranteed to be harmless (other than a miniscule performance impact):
the Ethernet specification requires zero padding up to the minimum
frame length for packets that are transmitted onto the wire, and so
the receiver will see the same packet whether or not we manually
insert this padding in software.
The additional padding causes the underlying Mellanox driver to avoid
its faulty code path, since it will never be asked to transmit a very
short packet.
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some SNP implementations (observed with a wifi adapter in a Dell
Latitude 3440 laptop) seem to require additional space in the
allocated receive buffers, otherwise full-length packets will be
silently dropped.
The EDK2 MnpDxe driver happens to allocate an additional 8 bytes of
padding (4 for a VLAN tag, 4 for the Ethernet frame checksum). Match
this behaviour since drivers are very likely to have been tested
against MnpDxe.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Done with the help of this Perl script:
$MARKER = 'PCI_ROM'; # a regex
$AB = 1; # At Begin
@HEAD = ();
@ITEMS = ();
@TAIL = ();
foreach $fn (@ARGV) {
open(IN, $fn) or die "Can't open file '$fn': $!\n";
while (<IN>) {
if (/$MARKER/) {
push @ITEMS, $_;
$AB = 0; # not anymore at begin
}
else {
if ($AB) {
push @HEAD, $_;
}
else {
push @TAIL, $_;
}
}
}
} continue {
close IN;
open(OUT, ">$fn") or die "Can't open file '$fn' for output: $!\n";
print OUT @HEAD;
print OUT sort @ITEMS;
print OUT @TAIL;
close OUT;
# For a next file
$AB = 1;
@HEAD = ();
@ITEMS = ();
@TAIL = ();
}
Executed that script while src/drivers/ as current working directory,
provided '$(grep -rl PCI_ROM)' as argument.
Signed-off-by: Geert Stappers <stappers@stappers.it>
|
|
Add support for BCM957608 device. Add support for additional link
speeds supported by BCM957608.
Signed-off-by: Joseph Wong <joseph.wong@broadcom.com>
|
|
Add additional chip IDs that can be recognized as part of the thor
family.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Successfully tested on FUJITSU LIFEBOOK U7413.
Signed-off-by: Christian Helmuth <christian.helmuth@genode-labs.com>
|
|
The ipair_tx() function uses a va_list twice (first to calculate the
formatted string length before allocation, then to construct the
string in the allocated buffer) but is missing the va_start() and
va_end() around the second usage. This is undefined behaviour that
happens to work on some build platforms.
Fix by adding the missing va_start() and va_end() around the second
usage of the variadic argument list.
Reported-by: Andreas Hammarskjöld <andreas@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow network upper-layer drivers (such as LLDP, which attaches to
each network device in order to provide a corresponding LLDP settings
block) to specify a size for private data, which will be allocated as
part of the network device structure (as with the existing private
data allocated for the underlying device driver).
This will allow network upper-layer drivers to be simplified by
omitting memory allocation and freeing code. If the upper-layer
driver requires a reference counter (e.g. for interface
initialisation), then it may use the network device's existing
reference counter, since this is now the reference counter for the
containing block of memory.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some network device drivers use the trivial netdev_priv() helper
function while others use the netdev->priv pointer directly.
Standardise on direct use of netdev->priv, in order to free up the
function name netdev_priv() for reuse.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Polling for TX completions is arguably redundant when there are no
transmissions currently in progress. Commit c6c7e78 ("[efi] Poll for
TX completions only when there is an outstanding TX buffer") switched
to setting the PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS flag only when
there is an in-progress transmission awaiting completion, in order to
reduce reported TX errors and debug message noise from buggy NII
implementations that report spurious TX completions whenever the
transmit queue is empty.
Some other NII implementations (observed with the Realtek driver in a
Dell Latitude 3440) seem to have a bug in the transmit datapath
handling which results in the transmit ring freezing after sending a
few hundred packets under heavy load. The symptoms are that the
TPPoll register's NPQ bit remains set and the 256-entry transmit ring
contains a large number of uncompleted descriptors (with the OWN bit
set), the first two of which have identical data buffer addresses.
Though iPXE will submit at most one in-progress transmission via NII,
the Dell/Realtek driver seems to make a page-aligned copy of each
transmit data buffer and to report TX completions immediately without
waiting for the packet to actually be transmitted. These synthetic TX
completions continue even after the hardware transmit ring freezes.
Setting PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS on every poll reduces the
probability of this Dell/Realtek driver bug being triggered by a
factor of around 500, which brings the failure rate down to the point
that it can sensibly be managed by external logic such as the
"--timeout" option for image downloads. Closing and reopening the
interface (via "ifclose"/"ifopen") will clear the error condition and
allow transmissions to resume.
Revert to setting PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS on every poll,
and silently ignore situations in which the hardware reports a
completion when no transmission is in progress. This approximately
matches the behaviour of the SnpDxe driver, which will also generally
set PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS on every poll.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The Intel I210's packet buffer size registers reset only on power up,
not when a reset signal is asserted. This can lead to the inability
to pass traffic in the event that the DMA TX Maximum Packet Size
(which does reset to its default value on reset) is bigger than the TX
Packet Buffer Size.
For example, an operating system may be using the time sensitive
networking features of the I210 and the registers may be programmed
correctly, but then a reset signal is asserted and iPXE on the next
boot will be unable to use the I210.
Mimic what Linux does and forcibly set the registers to their default
values.
Signed-off-by: Matt Parrella <parrella.matthew@gmail.com>
|
|
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
|
|
Some cards seem to have the receive VLAN tag stripping feature enabled
by default, which causes received VLAN packets to be misinterpreted as
being received by the trunk device.
Fix by disabling VLAN tag stripping in the C+ Command Register.
Debugged-by: Xinming Lai <yiyihu@gmail.com>
Tested-by: Xinming Lai <yiyihu@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
UEFI has the mildly annoying habit of installing copies of the
EFI_SIMPLE_NETWORK_PROTOCOL instance on the IPv4 and IPv6 child device
handles. This can cause iPXE's SNP driver to attempt to bind to a
copy of the EFI_SIMPLE_NETWORK_PROTOCOL that iPXE itself provided on a
different handle.
Fix by refusing to bind to an SNP (or NII) handle if there exists
another instance of the same protocol further up the device path (on
the basis that we always want to bind to the highest possible device).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Extend the functionality of efi_locate_device() to allow callers to
find instances of the protocol that may exist further up the device
path.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
We currently don't allocate an Asynchronous Event Notification Queue
(AENQ) because we don't actually care about any of the events that may
come in.
The ENA firmware found on Graviton instances requires the AENQ to
exist, otherwise all admin queue commands will fail.
Fix by allocating an AENQ and disabling all events (so that we do not
need to include code to acknowledge any events that may arrive).
Signed-off-by: Alexander Graf <graf@amazon.com>
|
|
Many laptops now include the ability to specify a "system-specific MAC
address" (also known as "pass-through MAC"), which is supposed to be
used for both the onboard NIC and for any attached docking station or
other USB NIC. This is intended to simplify interoperability with
software or hardware that relies on a MAC address to recognise an
individual machine: for example, a deployment server may associate the
MAC address with a particular operating system image to be deployed.
This therefore creates legitimate situations in which duplicate MAC
addresses may exist within the same system.
As described in commit 98d09a1 ("[netdevice] Avoid registering
duplicate network devices"), the Xen netfront driver relies on the
rejection of duplicate MAC addresses in order to inhibit registration
of the emulated PCI devices that a Xen PV-HVM guest will create to
shadow each of the paravirtual network devices.
Move the code that rejects duplicate MAC addresses from the network
device core to the Xen netfront driver, to allow for the existence of
duplicate MAC addresses in non-Xen setups.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some UNDI drivers (such as the AMI UsbNetworkPkg currently in the
process of being upstreamed into EDK2) have a bug that will prevent
any packets from being received unless at least one attempt has been
made to disable some receive filters.
Work around these buggy drivers by attempting to disable receive
filters before enabling them. Ignore any errors, since we genuinely
do not care whether or not the disabling succeeds.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Christian I. Nilsson <nikize@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some BIOSes in AWS EC2 (observed with a c6i.metal instance in
eu-west-2) will fail to assign an MMIO address to the ENA device,
which causes ioremap() to fail.
Experiments show that the ENA device is the only device behind its
bridge, even when multiple ENA devices are present, and that the BIOS
does assign a memory window to the bridge.
We may therefore choose to assign the device an MMIO address at the
start of the bridge's memory window.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some versions of the ENA hardware (observed on a c6i.large instance in
eu-west-2) seem to require a receive ring containing at least 128
entries: any smaller ring will never see receive completions or will
stall after the first few completions.
Increase the receive ring size to 128 entries (determined empirically)
for compatibility with these hardware versions. Limit the receive
ring fill level to 16 (as at present) to avoid consuming more memory
than will typically be available in the internal heap.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some versions of the ENA firmware (observed on a c6i.large instance in
eu-west-2) seem to require a host information page, without which the
CREATE_CQ command will fail with ENA_ADMIN_UNKNOWN_ERROR.
These firmware versions also seem to require us to claim that we are a
Linux kernel with a specific driver major version number. This
appears to be a firmware bug, as revealed by Linux kernel commit
1a63443af ("net/amazon: Ensure that driver version is aligned to the
linux kernel"): this commit changed the value of the driver version
number field to be the Linux kernel version, and was hastily reverted
in commit 92040c6da ("net: ena: fix broken interface between ENA
driver and FW") which clarified that the version number field does
actually have some undocumented significance to some versions of the
firmware.
Fix by providing a host information page via the SET_FEATURE command,
incorporating the apparently necessary lies about our identity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some versions of the ENA firmware (observed on a c6i.large instance in
eu-west-2) will complain if the completion queue's MSI-X vector field
is left empty, even though the queue configuration specifies that
interrupts are not used.
Work around these firmware versions by passing in what appears to be
the magic "no MSI-X vector" value in this field.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The ENA data path design has separate submission and completion
queues. Submission queues must be refilled in strict order (since
there is only a single linear tail pointer used to communicate the
existence of new entries to the hardware), and completion queue
entries include a request identifier copied verbatim from the
submission queue entry. Once the submission queue doorbell has been
rung, software never again reads from the submission queue entry and
nothing ever needs to write back to the submission queue entry since
completions are reported via the separate completion queue.
This design allows the hardware to complete submission queue entries
out of order, provided that it internally caches at least as many
entries as it leaves gaps.
Record and identify I/O buffers by request identifier (using a
circular ring buffer of unique request identifiers), and remove the
assumption that submission queue entries will be completed in order.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The CREATE_CQ command is permitted to return a size smaller than
requested, which could leave us in a situation where the completion
queue could overflow.
Avoid overflow by limiting the submission queue fill level to the
actual size of the completion queue.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Current versions of the E810 PF driver fail to set the number of
in-use queue pairs in response to the CONFIG_VSI_QUEUES message. When
the number of in-use queue pairs is less than the number of available
queue pairs, this results in some packets being directed to
nonexistent receive queues and hence silently dropped.
Work around this PF driver bug by explicitly configuring the number of
available queue pairs via the REQUEST_QUEUES message. This message
triggers a VF reset that, in turn, requires us to reopen the admin
queue and issue an additional GET_RESOURCES message to restore the VF
to a functional state.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The RESET_VF admin queue command does not complete via the usual
mechanism, but instead requires us to poll registers to wait for the
reset to take effect and then reopen the admin queue.
Allow for the existence of other admin queue commands that also
trigger a VF reset, by separating out the logic that waits for the
reset to complete.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Negotiate API version 1.1 in order to allow access to virtual function
opcodes that are disallowed by default on the E810.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Add a driver for the E810 family of 100 Gigabit Ethernet NICs. The
core datapath is identical to that of the 40 Gigabit XL710, and this
part of the code is shared between both drivers. The admin queue
mechanism is sufficiently similar to make it worth reusing substantial
portions of the code, with separate implementations for several
commands to handle the (unnecessarily) breaking changes in data
structure layouts. The major differences are in the mechanisms for
programming queue contexts (where the E810 abandons TX/RX symmetry)
and for configuring the transmit scheduler and receive filters: these
portions are sufficiently different to justify a separate driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Remove knowledge of the PRTGL_SA[HL] registers, and instead use the
admin queue to set the MAC address and maximum frame size.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Remove knowledge of the PRTPM_SA[HL] registers, and instead use the
admin queue to retrieve the MAC address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow for the MAC address to be fetched using an admin queue command,
instead of reading the PRTPM_SA[HL] registers directly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The PRTGL_SAH register contains the current maximum frame size, and is
not guaranteed on reset to contain the actual maximum frame size
supported by the hardware, which the datasheet specifies as 9728 bytes
(including the 4-byte CRC).
Set the maximum packet size to a hardcoded 9728 bytes instead of
reading from the PRTGL_SAH register.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Remove knowledge of the GLLAN_RCTL_0 register (which changes location
between the XL810 and E810 register maps), and instead unconditionally
issue the "clear PXE mode" command with the EEXIST error silenced.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The "clear PXE mode" admin queue command will return an EEXIST error
if the device is already in non-PXE mode, but there is no other admin
queue command that can be used to determine whether the device has
already been switched into non-PXE mode.
Provide a mechanism to allow expected errors from a command to be
silenced, to allow the "clear PXE mode" command to be cleanly used
without needing to first check the GLLAN_RCTL_0 register value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
At least one E810 admin queue command (Query Default Scheduling Tree
Topology) insists upon being provided with a 4kB data buffer, even
when the data to be returned is much smaller.
Work around this requirement by increasing the admin queue data buffer
size to 4kB.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Move knowledge of the virtual function data structures and admin
command definitions from intelxl.h to intelxlvf.h.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Remove the large static admin data buffer structure embedded within
struct intelxl_nic, and instead copy the response received via the
"send to VF" admin queue event to the (already consumed and completed)
admin command descriptor and data buffer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The physical and virtual function drivers each care about precisely
one admin queue event type. Simplify event handling by using a
per-driver callback instead of the existing weak function symbol.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The PCI device ID 8086:1889 is for the Intel Ethernet Adaptive Virtual
Function, which is a generic virtual function that can be exposed by
different generations of Intel hardware.
Rename the PCI ID from "xl710-vf-ad" to "iavf" to reflect that the
driver is not XL710-specific.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The E810 requires that receive descriptor rings have at least 64
entries (and are a multiple of 32 entries).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Do not attempt to use the admin commands to get the firmware version
and report the driver version for the virtual function driver, since
these will be rejected by the E810 firmware as invalid commands when
issued by a virtual function. Instead, use the mailbox interface to
negotiate the API version with the physical function driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The 100 Gigabit physical function driver requires a virtual function
driver to request that transmit and receive queues are mapped to MSI-X
vector 1 or higher.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The second parameter to intelxlvf_admin_queues() is a boolean used to
select the VF opcode, rather than the raw VF opcode itself.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Remove knowledge of the PFGEN_CTRL register (which changes location
between XL710 and E810 register maps), and instead use PCIe FLR to
reset the physical function.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
