[rtl8139] Split debug messages into DBGLVL_LOG and DBGLVL_EXTRA

1 files changed, 18 insertions, 13 deletions

diff --git a/src/drivers/net/rtl8139.c b/src/drivers/net/rtl8139.c
index 99830d7..a4ee969 100644
--- a/src/drivers/net/rtl8139.c
+++ b/src/drivers/net/rtl8139.c
@@ -279,10 +279,10 @@ static void rtl_init_eeprom ( struct net_device *netdev ) {
 	/* Detect EEPROM type and initialise three-wire device */
 	ee9356 = ( inw ( rtl->ioaddr + RxConfig ) & Eeprom9356 );
 	if ( ee9356 ) {
-		DBG ( "EEPROM is an AT93C56\n" );
+		DBGC ( rtl, "rtl8139 %p EEPROM is an AT93C56\n", rtl );
 		init_at93c56 ( &rtl->eeprom, 16 );
 	} else {
-		DBG ( "EEPROM is an AT93C46\n" );
+		DBGC ( rtl, "rtl8139 %p EEPROM is an AT93C46\n", rtl );
 		init_at93c46 ( &rtl->eeprom, 16 );
 	}
 	rtl->eeprom.bus = &rtl->spibit.bus;
@@ -290,7 +290,8 @@ static void rtl_init_eeprom ( struct net_device *netdev ) {
 	/* Initialise space for non-volatile options, if available */
 	vpd = ( inw ( rtl->ioaddr + Config1 ) & VPDEnable );
 	if ( vpd ) {
-		DBG ( "EEPROM in use for VPD; cannot use for options\n" );
+		DBGC ( rtl, "rtl8139 %p EEPROM in use for VPD; cannot use "
+		       "for options\n", rtl );
 	} else {
 		nvo_init ( &rtl->nvo, &rtl->eeprom.nvs, rtl_nvo_fragments,
 			   &netdev->refcnt );
@@ -333,7 +334,8 @@ static int rtl_open ( struct net_device *netdev ) {
 	if ( ! rtl->rx.ring )
 		return -ENOMEM;
 	outl ( virt_to_bus ( rtl->rx.ring ), rtl->ioaddr + RxBuf );
-	DBG ( "RX ring at %lx\n", virt_to_bus ( rtl->rx.ring ) );
+	DBGC ( rtl, "rtl8139 %p RX ring at %lx\n",
+	       rtl, virt_to_bus ( rtl->rx.ring ) );
 
 	/* Enable TX and RX */
 	outb ( ( CmdRxEnb | CmdTxEnb ), rtl->ioaddr + ChipCmd );
@@ -377,7 +379,7 @@ static int rtl_transmit ( struct net_device *netdev,
 
 	/* Check for space in TX ring */
 	if ( rtl->tx.iobuf[rtl->tx.next] != NULL ) {
-		DBG ( "TX overflow\n" );
+		DBGC ( rtl, "rtl8139 %p TX overflow\n", rtl );
 		return -ENOBUFS;
 	}
 
@@ -385,8 +387,8 @@ static int rtl_transmit ( struct net_device *netdev,
 	iob_pad ( iobuf, ETH_ZLEN );
 
 	/* Add to TX ring */
-	DBG ( "TX id %d at %lx+%zx\n", rtl->tx.next,
-	      virt_to_bus ( iobuf->data ), iob_len ( iobuf ) );
+	DBGC2 ( rtl, "rtl8139 %p TX id %d at %lx+%zx\n", rtl, rtl->tx.next,
+		virt_to_bus ( iobuf->data ), iob_len ( iobuf ) );
 	rtl->tx.iobuf[rtl->tx.next] = iobuf;
 	outl ( virt_to_bus ( iobuf->data ),
 	       rtl->ioaddr + TxAddr0 + 4 * rtl->tx.next );
@@ -422,7 +424,8 @@ static void rtl_poll ( struct net_device *netdev ) {
 	tsad = inw ( rtl->ioaddr + TxSummary );
 	for ( i = 0 ; i < TX_RING_SIZE ; i++ ) {
 		if ( ( rtl->tx.iobuf[i] != NULL ) && ( tsad & ( 1 << i ) ) ) {
-			DBG ( "TX id %d complete\n", i );
+			DBGC2 ( rtl, "rtl8139 %p TX id %d complete\n",
+				rtl, i );
 			netdev_tx_complete ( netdev, rtl->tx.iobuf[i] );
 			rtl->tx.iobuf[i] = NULL;
 		}
@@ -435,8 +438,8 @@ static void rtl_poll ( struct net_device *netdev ) {
 		rx_len = * ( ( uint16_t * )
 			     ( rtl->rx.ring + rtl->rx.offset + 2 ) );
 		if ( rx_status & RxOK ) {
-			DBG ( "RX packet at offset %x+%x\n", rtl->rx.offset,
-			      rx_len );
+			DBGC2 ( rtl, "rtl8139 %p RX packet at offset "
+				"%x+%x\n", rtl, rtl->rx.offset, rx_len );
 
 			rx_iob = alloc_iob ( rx_len );
 			if ( ! rx_iob ) {
@@ -458,8 +461,8 @@ static void rtl_poll ( struct net_device *netdev ) {
 
 			netdev_rx ( netdev, rx_iob );
 		} else {
-			DBG ( "RX bad packet (status %#04x len %d)\n",
-			      rx_status, rx_len );
+			DBGC ( rtl, "rtl8139 %p RX bad packet (status %#04x "
+			       "len %d)\n", rtl, rx_status, rx_len );
 			netdev_rx_err ( netdev, NULL, -EINVAL );
 		}
 		rtl->rx.offset = ( ( ( rtl->rx.offset + 4 + rx_len + 3 ) & ~3 )
@@ -476,7 +479,9 @@ static void rtl_poll ( struct net_device *netdev ) {
  */
 static void rtl_irq ( struct net_device *netdev, int enable ) {
 	struct rtl8139_nic *rtl = netdev->priv;
-	
+
+	DBGC ( rtl, "rtl8139 %p interrupts %s\n",
+	       rtl, ( enable ? "enabled" : "disabled" ) );
 	outw ( ( enable ? ( ROK | RER | TOK | TER ) : 0 ),
 	       rtl->ioaddr + IntrMask );
 }