diff options
-rw-r--r-- | .travis.yml | 10 | ||||
-rw-r--r-- | CMakeLists.txt | 39 | ||||
-rw-r--r-- | cmake/CodeCoverage.cmake | 163 | ||||
-rw-r--r-- | cmake/Coveralls.cmake | 111 | ||||
-rw-r--r-- | cmake/CoverallsClear.cmake | 24 | ||||
-rw-r--r-- | cmake/CoverallsGenerateGcov.cmake | 380 |
6 files changed, 724 insertions, 3 deletions
diff --git a/.travis.yml b/.travis.yml index 452ed17..5b23c94 100644 --- a/.travis.yml +++ b/.travis.yml @@ -2,13 +2,21 @@ env: matrix: - JANSSON_BUILD_METHOD=cmake JANSSON_CMAKE_OPTIONS="-DJANSSON_TEST_WITH_VALGRIND=ON" JANSSON_EXTRA_INSTALL="valgrind" - JANSSON_BUILD_METHOD=autotools + - JANSSON_BUILD_METHOD=coverage JANSSON_CMAKE_OPTIONS="-DJANSSON_COVERAGE=ON -DJANSSON_COVERALLS=ON -DCMAKE_BUILD_TYPE=Debug" JANSSON_EXTRA_INSTALL="lcov curl" language: c compiler: - gcc - clang +matrix: + exclude: + - compiler: clang + env: JANSSON_BUILD_METHOD=coverage JANSSON_CMAKE_OPTIONS="-DJANSSON_COVERAGE=ON -DJANSSON_COVERALLS=ON -DCMAKE_BUILD_TYPE=Debug" JANSSON_EXTRA_INSTALL="lcov curl" + allow_failures: + - env: JANSSON_BUILD_METHOD=coverage JANSSON_CMAKE_OPTIONS="-DJANSSON_COVERAGE=ON -DJANSSON_COVERALLS=ON -DCMAKE_BUILD_TYPE=Debug" JANSSON_EXTRA_INSTALL="lcov curl" install: - sudo apt-get update -qq - sudo apt-get install -y -qq cmake $JANSSON_EXTRA_INSTALL script: - if [ "$JANSSON_BUILD_METHOD" = "autotools" ]; then autoreconf -f -i && CFLAGS=-Werror ./configure && make check; fi - - if [ "$JANSSON_BUILD_METHOD" = "cmake" ]; then mkdir build && cd build && cmake .. $JANSSON_CMAKE_OPTIONS && cmake --build . && ctest --output-on-failure; fi + - if [ "$JANSSON_BUILD_METHOD" = "cmake" ]; then mkdir build && cd build && cmake $JANSSON_CMAKE_OPTIONS .. && cmake --build . && ctest --output-on-failure; fi + - if [ "$JANSSON_BUILD_METHOD" = "coverage" ]; then mkdir build && cd build && cmake $JANSSON_CMAKE_OPTIONS .. && cmake --build . && cmake --build . --target coveralls; fi diff --git a/CMakeLists.txt b/CMakeLists.txt index fdc6b36..ea55e28 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -61,6 +61,12 @@ if (MSVC) option(JANSSON_STATIC_CRT "Link the static CRT libraries" OFF ) endif () +if (UNIX) + option(JANSSON_COVERAGE "(GCC Only! Requires gcov/lcov to be installed). Include target for doing coverage analysis for the test suite. Note that -DCMAKE_BUILD_TYPE=Debug must be set" OFF) + option(JANSSON_COVERALLS "Generate coverage info for Coveralls" OFF) + option(JANSSON_COVERALLS_UPLOAD "Upload coverage info to Coveralls (Only works via Travis)" ON) +endif () + # Set some nicer output dirs. set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/bin) set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/lib) @@ -108,6 +114,21 @@ if (NOT WIN32 AND (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)) add_definitions("-fPIC") endif() +message("C compiler: ${CMAKE_C_COMPILER_ID}") + +# Coverage only works with GCC for a debug build. +if (JANSSON_COVERALLS) + set(JANSSON_COVERAGE ON) +endif() + +if (JANSSON_COVERAGE) + include(CodeCoverage) + include(Coveralls) + + # This adds coverage arguments to gcc/clang. + coveralls_turn_on_coverage() +endif() + check_include_files (endian.h HAVE_ENDIAN_H) check_include_files (fcntl.h HAVE_FCNTL_H) check_include_files (sched.h HAVE_SCHED_H) @@ -520,6 +541,7 @@ if (NOT JANSSON_WITHOUT_TESTS) # Test harness for the suites tests. build_testprog(json_process ${PROJECT_SOURCE_DIR}/test/bin) + set(SUITE_TEST_CMD ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/json_process) set(SUITES encoding-flags valid invalid invalid-unicode) foreach (SUITE ${SUITES}) file(GLOB TESTDIRS ${jansson_SOURCE_DIR}/test/suites/${SUITE}/*) @@ -528,8 +550,6 @@ if (NOT JANSSON_WITHOUT_TESTS) if (IS_DIRECTORY ${TESTDIR}) get_filename_component(TNAME ${TESTDIR} NAME) - set(SUITE_TEST_CMD ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/json_process) - if (JANSSON_TEST_WITH_VALGRIND) add_test(memcheck__${SUITE}__${TNAME} ${MEMCHECK_COMMAND} ${SUITE_TEST_CMD} ${TESTDIR}) @@ -551,6 +571,21 @@ if (NOT JANSSON_WITHOUT_TESTS) endforeach () endforeach () + if (JANSSON_COVERAGE) + setup_target_for_coverage( + coverage # Coverage make target "make coverage". + coverage # Name of output directory. + make # Name of test runner executable. + test) # Arguments to the test runner above (make test). + + if (JANSSON_COVERALLS) + set(COVERAGE_SRCS ${JANSSON_SRC}) + coveralls_setup("${COVERAGE_SRCS}" ${JANSSON_COVERALLS_UPLOAD}) + endif () + endif () + + # Enable using "make check" just like the autotools project. + # By default cmake creates a target "make test" add_custom_target(check COMMAND ${CMAKE_CTEST_COMMAND} DEPENDS json_process ${api_tests}) endif () diff --git a/cmake/CodeCoverage.cmake b/cmake/CodeCoverage.cmake new file mode 100644 index 0000000..402f636 --- /dev/null +++ b/cmake/CodeCoverage.cmake @@ -0,0 +1,163 @@ +# +# Boost Software License - Version 1.0 - August 17th, 2003 +# +# Permission is hereby granted, free of charge, to any person or organization +# obtaining a copy of the software and accompanying documentation covered by +# this license (the "Software") to use, reproduce, display, distribute, +# execute, and transmit the Software, and to prepare derivative works of the +# Software, and to permit third-parties to whom the Software is furnished to +# do so, all subject to the following: +# +# The copyright notices in the Software and this entire statement, including +# the above license grant, this restriction and the following disclaimer, +# must be included in all copies of the Software, in whole or in part, and +# all derivative works of the Software, unless such copies or derivative +# works are solely in the form of machine-executable object code generated by +# a source language processor. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT +# SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE +# FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, +# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +# DEALINGS IN THE SOFTWARE. +# +# 2012-01-31, Lars Bilke +# - Enable Code Coverage +# +# 2013-09-17, Joakim Söderberg +# - Added support for Clang. +# - Some additional usage instructions. +# +# USAGE: +# 1. Copy this file into your cmake modules path. +# +# 2. Add the following line to your CMakeLists.txt: +# INCLUDE(CodeCoverage) +# +# 3. Set compiler flags to turn off optimization and enable coverage: +# SET(CMAKE_CXX_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage") +# SET(CMAKE_C_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage") +# +# 3. Use the function SETUP_TARGET_FOR_COVERAGE to create a custom make target +# which runs your test executable and produces a lcov code coverage report: +# Example: +# SETUP_TARGET_FOR_COVERAGE( +# my_coverage_target # Name for custom target. +# test_driver # Name of the test driver executable that runs the tests. +# # NOTE! This should always have a ZERO as exit code +# # otherwise the coverage generation will not complete. +# coverage # Name of output directory. +# ) +# +# 4. Build a Debug build: +# cmake -DCMAKE_BUILD_TYPE=Debug .. +# make +# make my_coverage_target +# +# + +# Check prereqs +FIND_PROGRAM( GCOV_PATH gcov ) +FIND_PROGRAM( LCOV_PATH lcov ) +FIND_PROGRAM( GENHTML_PATH genhtml ) +FIND_PROGRAM( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/tests) + +IF(NOT GCOV_PATH) + MESSAGE(FATAL_ERROR "gcov not found! Aborting...") +ENDIF() # NOT GCOV_PATH + +IF(NOT (CMAKE_COMPILER_IS_GNUCXX OR CMAKE_COMPILER_IS_GNUCC)) + # Clang version 3.0.0 and greater now supports gcov as well. + MESSAGE(WARNING "Compiler is not GNU gcc! Clang Version 3.0.0 and greater supports gcov as well, but older versions don't.") + + IF(NOT ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang" OR "${CMAKE_C_COMPILER_ID}" STREQUAL "Clang")) + MESSAGE(FATAL_ERROR "Compiler is not GNU gcc or Clang! Aborting...") + ENDIF() +ENDIF() # NOT CMAKE_COMPILER_IS_GNUCXX + +IF ( NOT CMAKE_BUILD_TYPE STREQUAL "Debug" ) + MESSAGE( WARNING "Code coverage results with an optimized (non-Debug) build may be misleading" ) +ENDIF() # NOT CMAKE_BUILD_TYPE STREQUAL "Debug" + + +# Param _targetname The name of new the custom make target +# Param _outputname lcov output is generated as _outputname.info +# HTML report is generated in _outputname/index.html +# Param _testrunner The name of the target which runs the tests. +# MUST return ZERO always, even on errors. +# If not, no coverage report will be created! +# Optional fourth parameter is passed as arguments to _testrunner +# Pass them in list form, e.g.: "-j;2" for -j 2 +FUNCTION(SETUP_TARGET_FOR_COVERAGE _targetname _outputname _testrunner) + + IF(NOT LCOV_PATH) + MESSAGE(FATAL_ERROR "lcov not found! Aborting...") + ENDIF() # NOT LCOV_PATH + + IF(NOT GENHTML_PATH) + MESSAGE(FATAL_ERROR "genhtml not found! Aborting...") + ENDIF() # NOT GENHTML_PATH + + # Setup target + ADD_CUSTOM_TARGET(${_targetname} + + # Cleanup lcov + ${LCOV_PATH} --directory . --zerocounters + + # Run tests + COMMAND ${_testrunner} ${ARGV3} + + # Capturing lcov counters and generating report + COMMAND ${LCOV_PATH} --directory . --capture --output-file ${_outputname}.info + COMMAND ${LCOV_PATH} --remove ${_outputname}.info 'tests/*' '/usr/*' --output-file ${_outputname}.info.cleaned + COMMAND ${GENHTML_PATH} -o ${_outputname} ${_outputname}.info.cleaned + COMMAND ${CMAKE_COMMAND} -E remove ${_outputname}.info ${_outputname}.info.cleaned + + WORKING_DIRECTORY ${CMAKE_BINARY_DIR} + COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report." + ) + + # Show info where to find the report + ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD + COMMAND ; + COMMENT "Open ./${_outputname}/index.html in your browser to view the coverage report." + ) + +ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE + +# Param _targetname The name of new the custom make target +# Param _testrunner The name of the target which runs the tests +# Param _outputname cobertura output is generated as _outputname.xml +# Optional fourth parameter is passed as arguments to _testrunner +# Pass them in list form, e.g.: "-j;2" for -j 2 +FUNCTION(SETUP_TARGET_FOR_COVERAGE_COBERTURA _targetname _testrunner _outputname) + + IF(NOT PYTHON_EXECUTABLE) + MESSAGE(FATAL_ERROR "Python not found! Aborting...") + ENDIF() # NOT PYTHON_EXECUTABLE + + IF(NOT GCOVR_PATH) + MESSAGE(FATAL_ERROR "gcovr not found! Aborting...") + ENDIF() # NOT GCOVR_PATH + + ADD_CUSTOM_TARGET(${_targetname} + + # Run tests + ${_testrunner} ${ARGV3} + + # Running gcovr + COMMAND ${GCOVR_PATH} -x -r ${CMAKE_SOURCE_DIR} -e '${CMAKE_SOURCE_DIR}/tests/' -o ${_outputname}.xml + WORKING_DIRECTORY ${CMAKE_BINARY_DIR} + COMMENT "Running gcovr to produce Cobertura code coverage report." + ) + + # Show info where to find the report + ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD + COMMAND ; + COMMENT "Cobertura code coverage report saved in ${_outputname}.xml." + ) + +ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE_COBERTURA + diff --git a/cmake/Coveralls.cmake b/cmake/Coveralls.cmake new file mode 100644 index 0000000..29221c9 --- /dev/null +++ b/cmake/Coveralls.cmake @@ -0,0 +1,111 @@ +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in all +# copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +# SOFTWARE. +# +# Copyright (C) 2014 Joakim Söderberg <joakim.soderberg@gmail.com> +# + + +# +# Param _COVERAGE_SRCS A list of source files that coverage should be collected for. +# Param _COVERALLS_UPLOAD Upload the result to coveralls? +# +function(coveralls_setup _COVERAGE_SRCS _COVERALLS_UPLOAD) + # When passing a CMake list to an external process, the list + # will be converted from the format "1;2;3" to "1 2 3". + # This means the script we're calling won't see it as a list + # of sources, but rather just one long path. We remedy this + # by replacing ";" with "*" and then reversing that in the script + # that we're calling. + # http://cmake.3232098.n2.nabble.com/Passing-a-CMake-list-quot-as-is-quot-to-a-custom-target-td6505681.html + set(COVERAGE_SRCS_TMP ${_COVERAGE_SRCS}) + set(COVERAGE_SRCS "") + foreach (COVERAGE_SRC ${COVERAGE_SRCS_TMP}) + set(COVERAGE_SRCS "${COVERAGE_SRCS}*${COVERAGE_SRC}") + endforeach() + + #message("Coverage sources: ${COVERAGE_SRCS}") + set(COVERALLS_FILE ${PROJECT_BINARY_DIR}/coveralls.json) + + add_custom_target(coveralls_generate + + # Zero the coverage counters. + COMMAND ${CMAKE_COMMAND} + -P "${PROJECT_SOURCE_DIR}/cmake/CoverallsClear.cmake" + + # Run regress tests. + COMMAND ${CMAKE_CTEST_COMMAND} --output-on-failure + + # Generate Gcov and translate it into coveralls JSON. + # We do this by executing an external CMake script. + # (We don't want this to run at CMake generation time, but after compilation and everything has run). + COMMAND ${CMAKE_COMMAND} + -DCOVERAGE_SRCS="${COVERAGE_SRCS}" # TODO: This is passed like: "a b c", not "a;b;c" + -DCOVERALLS_OUTPUT_FILE="${COVERALLS_FILE}" + -DCOV_PATH="${PROJECT_BINARY_DIR}" + -DPROJECT_ROOT="${PROJECT_SOURCE_DIR}" + -P "${PROJECT_SOURCE_DIR}/cmake/CoverallsGenerateGcov.cmake" + + WORKING_DIRECTORY ${PROJECT_BINARY_DIR} + COMMENT "Generating coveralls output..." + ) + + if (_COVERALLS_UPLOAD) + message("COVERALLS UPLOAD: ON") + + find_program(CURL_EXECUTABLE curl) + + if (NOT CURL_EXECUTABLE) + message(FATAL_ERROR "Coveralls: curl not found! Aborting") + endif() + + add_custom_target(coveralls_upload + # Upload the JSON to coveralls. + COMMAND ${CURL_EXECUTABLE} + -S -F json_file=@${COVERALLS_FILE} + https://coveralls.io/api/v1/jobs + + DEPENDS coveralls_generate + + WORKING_DIRECTORY ${PROJECT_BINARY_DIR} + COMMENT "Uploading coveralls output...") + + add_custom_target(coveralls DEPENDS coveralls_upload) + else() + message("COVERALLS UPLOAD: OFF") + add_custom_target(coveralls DEPENDS coveralls_generate) + endif() + +endfunction() + +macro(coveralls_turn_on_coverage) + if(NOT (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX) + AND (NOT "${CMAKE_C_COMPILER_ID}" STREQUAL "Clang")) + message(FATAL_ERROR "Coveralls: Compiler ${CMAKE_C_COMPILER_ID} is not GNU gcc! Aborting... You can set this on the command line using CC=/usr/bin/gcc CXX=/usr/bin/g++ cmake <options> ..") + endif() + + if(NOT CMAKE_BUILD_TYPE STREQUAL "Debug") + message(FATAL_ERROR "Coveralls: Code coverage results with an optimised (non-Debug) build may be misleading! Add -DCMAKE_BUILD_TYPE=Debug") + endif() + + set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g -O0 -fprofile-arcs -ftest-coverage") + set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g -O0 -fprofile-arcs -ftest-coverage") +endmacro() + + + diff --git a/cmake/CoverallsClear.cmake b/cmake/CoverallsClear.cmake new file mode 100644 index 0000000..eb68695 --- /dev/null +++ b/cmake/CoverallsClear.cmake @@ -0,0 +1,24 @@ +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in all +# copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +# SOFTWARE. +# +# Copyright (C) 2014 Joakim Söderberg <joakim.soderberg@gmail.com> +# + +file(REMOVE_RECURSE ${PROJECT_BINARY_DIR}/*.gcda) + diff --git a/cmake/CoverallsGenerateGcov.cmake b/cmake/CoverallsGenerateGcov.cmake new file mode 100644 index 0000000..0c4c2b0 --- /dev/null +++ b/cmake/CoverallsGenerateGcov.cmake @@ -0,0 +1,380 @@ +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in all +# copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +# SOFTWARE. +# +# Copyright (C) 2014 Joakim Söderberg <joakim.soderberg@gmail.com> +# +# This is intended to be run by a custom target in a CMake project like this. +# 0. Compile program with coverage support. +# 1. Clear coverage data. (Recursively delete *.gcda in build dir) +# 2. Run the unit tests. +# 3. Run this script specifying which source files the coverage should be performed on. +# +# This script will then use gcov to generate .gcov files in the directory specified +# via the COV_PATH var. This should probably be the same as your cmake build dir. +# +# It then parses the .gcov files to convert them into the Coveralls JSON format: +# https://coveralls.io/docs/api +# +# Example for running as standalone CMake script from the command line: +# (Note it is important the -P is at the end...) +# $ cmake -DCOV_PATH=$(pwd) +# -DCOVERAGE_SRCS="catcierge_rfid.c;catcierge_timer.c" +# -P ../cmake/CoverallsGcovUpload.cmake +# +CMAKE_MINIMUM_REQUIRED(VERSION 2.8) + + +# +# Make sure we have the needed arguments. +# +if (NOT COVERALLS_OUTPUT_FILE) + message(FATAL_ERROR "Coveralls: No coveralls output file specified. Please set COVERALLS_OUTPUT_FILE") +endif() + +if (NOT COV_PATH) + message(FATAL_ERROR "Coveralls: Missing coverage directory path where gcov files will be generated. Please set COV_PATH") +endif() + +if (NOT COVERAGE_SRCS) + message(FATAL_ERROR "Coveralls: Missing the list of source files that we should get the coverage data for COVERAGE_SRCS") +endif() + +if (NOT PROJECT_ROOT) + message(FATAL_ERROR "Coveralls: Missing PROJECT_ROOT.") +endif() + +# Since it's not possible to pass a CMake list properly in the +# "1;2;3" format to an external process, we have replaced the +# ";" with "*", so reverse that here so we get it back into the +# CMake list format. +string(REGEX REPLACE "\\*" ";" COVERAGE_SRCS ${COVERAGE_SRCS}) + +find_program(GCOV_EXECUTABLE gcov) + +if (NOT GCOV_EXECUTABLE) + message(FATAL_ERROR "gcov not found! Aborting...") +endif() + +find_package(Git) + +# TODO: Add these git things to the coveralls json. +if (GIT_FOUND) + # Branch. + execute_process( + COMMAND ${GIT_EXECUTABLE} rev-parse --abbrev-ref HEAD + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + OUTPUT_VARIABLE GIT_BRANCH + OUTPUT_STRIP_TRAILING_WHITESPACE + ) + + macro (git_log_format FORMAT_CHARS VAR_NAME) + execute_process( + COMMAND ${GIT_EXECUTABLE} log -1 --pretty=format:%${FORMAT_CHARS} + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + OUTPUT_VARIABLE ${VAR_NAME} + OUTPUT_STRIP_TRAILING_WHITESPACE + ) + endmacro() + + git_log_format(an GIT_AUTHOR_EMAIL) + git_log_format(ae GIT_AUTHOR_EMAIL) + git_log_format(cn GIT_COMMITTER_NAME) + git_log_format(ce GIT_COMMITTER_EMAIL) + git_log_format(B GIT_COMMIT_MESSAGE) + + message("Git exe: ${GIT_EXECUTABLE}") + message("Git branch: ${GIT_BRANCH}") + message("Git author: ${GIT_AUTHOR_NAME}") + message("Git e-mail: ${GIT_AUTHOR_EMAIL}") + message("Git commiter name: ${GIT_COMMITTER_NAME}") + message("Git commiter e-mail: ${GIT_COMMITTER_EMAIL}") + message("Git commit message: ${GIT_COMMIT_MESSAGE}") + +endif() + +############################# Macros ######################################### + +# +# This macro converts from the full path format gcov outputs: +# +# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov +# +# to the original source file path the .gcov is for: +# +# /path/to/project/root/subdir/the_file.c +# +macro(get_source_path_from_gcov_filename _SRC_FILENAME _GCOV_FILENAME) + + # /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov + # -> + # #path#to#project#root#subdir#the_file.c.gcov + get_filename_component(_GCOV_FILENAME_WEXT ${_GCOV_FILENAME} NAME) + + # #path#to#project#root#subdir#the_file.c.gcov -> /path/to/project/root/subdir/the_file.c + string(REGEX REPLACE "\\.gcov$" "" SRC_FILENAME_TMP ${_GCOV_FILENAME_WEXT}) + string(REGEX REPLACE "\#" "/" SRC_FILENAME_TMP ${SRC_FILENAME_TMP}) + set(${_SRC_FILENAME} "${SRC_FILENAME_TMP}") +endmacro() + +############################################################################## + +# Get the coverage data. +file(GLOB_RECURSE GCDA_FILES "${COV_PATH}/*.gcda") +message("GCDA files:") + +# Get a list of all the object directories needed by gcov +# (The directories the .gcda files and .o files are found in) +# and run gcov on those. +foreach(GCDA ${GCDA_FILES}) + message("Process: ${GCDA}") + message("------------------------------------------------------------------------------") + get_filename_component(GCDA_DIR ${GCDA} PATH) + + # + # The -p below refers to "Preserve path components", + # This means that the generated gcov filename of a source file will + # keep the original files entire filepath, but / is replaced with #. + # Example: + # + # /path/to/project/root/build/CMakeFiles/the_file.dir/subdir/the_file.c.gcda + # ------------------------------------------------------------------------------ + # File '/path/to/project/root/subdir/the_file.c' + # Lines executed:68.34% of 199 + # /path/to/project/root/subdir/the_file.c:creating '#path#to#project#root#subdir#the_file.c.gcov' + # + # If -p is not specified then the file is named only "the_file.c.gcov" + # + execute_process( + COMMAND ${GCOV_EXECUTABLE} -p -o ${GCDA_DIR} ${GCDA} + WORKING_DIRECTORY ${COV_PATH} + ) +endforeach() + +# TODO: Make these be absolute path +file(GLOB ALL_GCOV_FILES ${COV_PATH}/*.gcov) + +# Get only the filenames to use for filtering. +#set(COVERAGE_SRCS_NAMES "") +#foreach (COVSRC ${COVERAGE_SRCS}) +# get_filename_component(COVSRC_NAME ${COVSRC} NAME) +# message("${COVSRC} -> ${COVSRC_NAME}") +# list(APPEND COVERAGE_SRCS_NAMES "${COVSRC_NAME}") +#endforeach() + +# +# Filter out all but the gcov files we want. +# +# We do this by comparing the list of COVERAGE_SRCS filepaths that the +# user wants the coverage data for with the paths of the generated .gcov files, +# so that we only keep the relevant gcov files. +# +# Example: +# COVERAGE_SRCS = +# /path/to/project/root/subdir/the_file.c +# +# ALL_GCOV_FILES = +# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov +# /path/to/project/root/build/#path#to#project#root#subdir#other_file.c.gcov +# +# Result should be: +# GCOV_FILES = +# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov +# +set(GCOV_FILES "") +#message("Look in coverage sources: ${COVERAGE_SRCS}") +message("\nFilter out unwanted GCOV files:") +message("===============================") + +set(COVERAGE_SRCS_REMAINING ${COVERAGE_SRCS}) + +foreach (GCOV_FILE ${ALL_GCOV_FILES}) + + # + # /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov + # -> + # /path/to/project/root/subdir/the_file.c + get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE}) + + # Is this in the list of source files? + # TODO: We want to match against relative path filenames from the source file root... + list(FIND COVERAGE_SRCS ${GCOV_SRC_PATH} WAS_FOUND) + + if (NOT WAS_FOUND EQUAL -1) + message("YES: ${GCOV_FILE}") + list(APPEND GCOV_FILES ${GCOV_FILE}) + + # We remove it from the list, so we don't bother searching for it again. + # Also files left in COVERAGE_SRCS_REMAINING after this loop ends should + # have coverage data generated from them (no lines are covered). + list(REMOVE_ITEM COVERAGE_SRCS_REMAINING ${GCOV_SRC_PATH}) + else() + message("NO: ${GCOV_FILE}") + endif() +endforeach() + +# TODO: Enable setting these +set(JSON_SERVICE_NAME "travis-ci") +set(JSON_SERVICE_JOB_ID $ENV{TRAVIS_JOB_ID}) + +set(JSON_TEMPLATE +"{ + \"service_name\": \"\@JSON_SERVICE_NAME\@\", + \"service_job_id\": \"\@JSON_SERVICE_JOB_ID\@\", + \"source_files\": \@JSON_GCOV_FILES\@ +}" +) + +set(SRC_FILE_TEMPLATE +"{ + \"name\": \"\@GCOV_SRC_REL_PATH\@\", + \"source\": \"\@GCOV_FILE_SOURCE\@\", + \"coverage\": \@GCOV_FILE_COVERAGE\@ +}" +) + +message("\nGenerate JSON for files:") +message("=========================") + +set(JSON_GCOV_FILES "[") + +# Read the GCOV files line by line and get the coverage data. +foreach (GCOV_FILE ${GCOV_FILES}) + + get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE}) + file(RELATIVE_PATH GCOV_SRC_REL_PATH "${PROJECT_ROOT}" "${GCOV_SRC_PATH}") + + # Loads the gcov file as a list of lines. + file(STRINGS ${GCOV_FILE} GCOV_LINES) + + # Instead of trying to parse the source from the + # gcov file, simply read the file contents from the source file. + # (Parsing it from the gcov is hard because C-code uses ; in many places + # which also happens to be the same as the CMake list delimeter). + file(READ ${GCOV_SRC_PATH} GCOV_FILE_SOURCE) + + string(REPLACE "\\" "\\\\" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + string(REGEX REPLACE "\"" "\\\\\"" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + string(REPLACE "\t" "\\\\t" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + string(REPLACE "\r" "\\\\r" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + string(REPLACE "\n" "\\\\n" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + # According to http://json.org/ these should be escaped as well. + # Don't know how to do that in CMake however... + #string(REPLACE "\b" "\\\\b" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + #string(REPLACE "\f" "\\\\f" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + #string(REGEX REPLACE "\u([a-fA-F0-9]{4})" "\\\\u\\1" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}") + + # We want a json array of coverage data as a single string + # start building them from the contents of the .gcov + set(GCOV_FILE_COVERAGE "[") + + foreach (GCOV_LINE ${GCOV_LINES}) + # Example of what we're parsing: + # Hitcount |Line | Source + # " 8: 26: if (!allowed || (strlen(allowed) == 0))" + string(REGEX REPLACE + "^([^:]*):([^:]*):(.*)$" + "\\1;\\2;\\3" + RES + "${GCOV_LINE}") + + list(LENGTH RES RES_COUNT) + if (RES_COUNT GREATER 2) + list(GET RES 0 HITCOUNT) + list(GET RES 1 LINE) + list(GET RES 2 SOURCE) + + string(STRIP ${HITCOUNT} HITCOUNT) + string(STRIP ${LINE} LINE) + + # Lines with 0 line numbers are metadata and can be ignored. + if (NOT ${LINE} EQUAL 0) + + # Translate the hitcount into valid JSON values. + if (${HITCOUNT} STREQUAL "#####") + set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ") + elseif (${HITCOUNT} STREQUAL "-") + set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ") + else() + set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}${HITCOUNT}, ") + endif() + # TODO: Look for LCOV_EXCL_LINE in SOURCE to get rid of false positives. + endif() + else() + message(WARNING "Failed to properly parse line --> ${GCOV_LINE}") + endif() + endforeach() + + # Advanced way of removing the trailing comma in the JSON array. + # "[1, 2, 3, " -> "[1, 2, 3" + string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE}) + + # Append the trailing ] to complete the JSON array. + set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]") + + # Generate the final JSON for this file. + message("Generate JSON for file: ${GCOV_SRC_REL_PATH}...") + string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON) + + set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ") +endforeach() + +# Loop through all files we couldn't find any coverage for +# as well, and generate JSON for those as well with 0% coverage. +foreach(NOT_COVERED_SRC ${COVERAGE_SRCS_REMAINING}) + + # Loads the source file as a list of lines. + file(STRINGS ${NOT_COVERED_SRC} SRC_LINES) + + set(GCOV_FILE_COVERAGE "[") + set(GCOV_FILE_SOURCE "") + + foreach (SOURCE ${SRC_LINES}) + set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ") + + string(REPLACE "\\" "\\\\" SOURCE "${SOURCE}") + string(REGEX REPLACE "\"" "\\\\\"" SOURCE "${SOURCE}") + string(REPLACE "\t" "\\\\t" SOURCE "${SOURCE}") + string(REPLACE "\r" "\\\\r" SOURCE "${SOURCE}") + set(GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}${SOURCE}\\n") + endforeach() + + # Remove trailing comma, and complete JSON array with ] + string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE}) + set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]") + + # Generate the final JSON for this file. + message("Generate JSON for non-gcov file: ${NOT_COVERED_SRC}...") + string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON) + set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ") +endforeach() + +# Get rid of trailing comma. +string(REGEX REPLACE ",[ ]*$" "" JSON_GCOV_FILES ${JSON_GCOV_FILES}) +set(JSON_GCOV_FILES "${JSON_GCOV_FILES}]") + +# Generate the final complete JSON! +message("Generate final JSON...") +string(CONFIGURE ${JSON_TEMPLATE} JSON) + +file(WRITE "${COVERALLS_OUTPUT_FILE}" "${JSON}") +message("###########################################################################") +message("Generated coveralls JSON containing coverage data:") +message("${COVERALLS_OUTPUT_FILE}") +message("###########################################################################") + |