Age | Commit message (Collapse) | Author | Files | Lines |
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the NetworkPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
|
|
Introduce the "mChapHash" table, containing the hash algorithms supported
for CHAP. Hash algos listed at the beginning of the table are preferred by
the initiator.
In ISCSI_CHAP_STEP_ONE, send such a CHAP_A value that is the
comma-separated, ordered list of algorithm identifiers from "mChapHash".
Pre-format this value string at driver startup, in the new function
IScsiCHAPInitHashList().
(In IScsiCHAPInitHashList(), also enforce that every hash algo's digest
size fit into ISCSI_CHAP_MAX_DIGEST_SIZE, as the latter controls the
digest, outgoing challenge, and hex *allocations*.)
In ISCSI_CHAP_STEP_TWO, allow the target to select one of the offered hash
algorithms, and remember the selection for the later steps. For
ISCSI_CHAP_STEP_THREE, hash the challenge from the target with the
selected hash algo.
In ISCSI_CHAP_STEP_THREE, send the correctly sized digest to the target.
If the initiator wants mutual authentication, then generate a challenge
with as many bytes as the target's digest will have, in
ISCSI_CHAP_STEP_FOUR.
In ISCSI_CHAP_STEP_FOUR (i.e., when mutual authentication is required by
the initiator), verify the target's response (digest) with the selected
algorithm.
Clear the selected hash algorithm before every login (remember that in
IScsiDxe, every login is a leading login).
There is no peer-observable change from this patch, as it only reworks the
current MD5 support into the new internal representation.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210629163337.14120-5-lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
|
|
Fix various typos in comments and documentation.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-42-philmd@redhat.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
During cleanup in case of initialization failure, some driver
bindings are not installed. Using abstractions in UEFILib takes
care of it.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1428
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
|
|
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Base on the request of https://bugzilla.tianocore.org/show_bug.cgi?id=710,
we provide this patch to IPv6 condition check by leveraging AIP Protocol.
Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
Currently, error handling in IScsiDriverEntryPoint is incorrect. For
example, if IScsiCreateAttempts() return error due to the limited max
variable size, iSCSI will not unload the configuration entries.
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
|
|
v2:
Add error handling if can not create Attempts in driver entry point.
Since we support to define a macro be a PCD value, we enhance our code
by modifying the structure in IFR_NVDATA. This effect code logic mainly
in Creating Keywords,Convert IFR NvData To AttemptConfigData ByKeyword and
reverse function.
Fix typo errors and sync based on the latest code.
Enable iSCSI keywords configuration based on x-UEFI
name space. we introduce new PCD to control the attempt
numbers which will be created in non activated state, besides
the Attempt name is changed to READ_ONLY attribute in UI.
We can invoke KEYWORD HANDLER Protocol to configure
the related keywords.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin jiaxin.wu@intel.com
|
|
Update existing #define and add a new #define used for the
PCD PcdIScsiAIPNetworkBootPolicy. Update the code in iScsiStart
according to the #define changes in iScsiDriver.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
v2:
*1. Add IScsiDnsIsConfigured function in IScsiSupported to check
attempt using DNS protocol or not.2. Fix wrongs typos in IScsiDns.c
and .uni file.3. define a macro for the length of target URL.4.
update the Copyright to 2017.
Add DNS support for target URL directly configuration in UI.
Besides, When we enable the option (Get target info via DHCP) ,
the dhcp server will return target info include the rootpath,
like the format
"iscsi:"<servername>":"<protocol>":"<port>":"<LUN>":"<targetname>
According to the RFC 4173,the server name region is expressed as
IPv4(192.168.10.20 )or IPv6 ([2000:bbbb::3]) or domain name,
but currently we only support the IP address format.
To enable this feature, we can support both.
Another enhancement is that we can deal with the data received from
the iSCSI login response with an target redirection status,
in which contains the Target Address in the format
domainname[:port][,portal-group-tag] required by RFC 3720.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Current ISCSI driver records redirected iSCSI targetIP/Port in iBFT
once redirection occurs, which removes the possibility of the OS
to reconnect to the configured IP for load balancing. The behavior
is not explicitly described in IBFT spec, though the MSFT expert
confirm we should record original user setting rather than
publish the redirected IP.
Thanks Sriram for reviewing and validating this patch in his test-bed.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
|
|
v2:
*Fix some memory leak issue.
This patch is used to replace ASSERT with error handling in Http boot
Driver and IScsi driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
It is the follow up of 3ab41b7a325ca11a12b42f5ad1661c4b6791cb49
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
If two attempts added on different NIC and enable
MPIO attribute, then change the attempts order. If
both two attempts succeed to connect the target,it
should abort the later one in the order and uninstall
ExtScsiPassThruProtocol Interface, But now it
unistall it twice.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
This patch is used to fix suspicious dereference of pointer before
NULL check in IScsiDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19552 6f19259b-4bc3-4df7-8a09-765794883524
|
|
According to UEFI spec, iSCSI HBA must install an AIP instance
with network boot information block. This patch updates UEFI
iSCSI driver to check whether there are AIP instances installed
by iSCSI HBA adapter and if yes, the UEFI iSCSI driver will return
EFI_ABORTED in its driver binding Start(). Also the patch
introduces a PCD PcdIScsiAIPNetworkBootPolicy for
platform owner to define particular policy when the iSCSI HBA
will survive and UEFI iSCSI will fail. The default policy is
STOP_UEFI_ISCSI_IF_AIP_SUPPORT_OFFLOAD which means that when ISCSI HBA
adapter installs an AIP and claims it supports an offload engine
for iSCSI boot, the UEFI iSCSI driver will return EFI_ABORTED.
The patch V2 adds a new value ALWAYS_USE_UEFI_ISCSI_AND_IGNORE_AIP
to PCD PcdIScsiAIPNetworkBootPolicy. This allows the platform to
avoid running into buggy IHV drivers that have issue with AIP.
It is suggested by El-Haj-Mahmoud,Samer <samer.el-haj-mahmoud@hpe.com>.
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19367 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The patch fixes iSCSI driver can't reinstate itself when configured
in AutoConfigure mode and IPv6 stack is actually used.
The issue occurs when iSCSI driver communicates with
iSCSI LIO target in IPv6 path and the target sends
back TCP FIN packets randomly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18546 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16774 6f19259b-4bc3-4df7-8a09-765794883524
|
|
variable.
Removes RT attribute for “AttemptOrder” variable.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Yao, Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15328 6f19259b-4bc3-4df7-8a09-765794883524
|
|
uninstall it when it really exists.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Tian, Feng <feng.tian@intel.com>
Reviewed-by: Jin, Eric <eric.jin@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15092 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Create rules to determine whether iSCSI need DHCP protocol in current configuration by examining user’s configuration data in DriverBindingSupported().
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com >
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14803 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14315 6f19259b-4bc3-4df7-8a09-765794883524
|
|
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
|
|
0. Remove the unused private GUID from module source files.
1. Use gEfiCallerIdGuid replace of the private module GUID.
2. Add the public header files to define HII FormSet and PackageList GUID used in every HII driver.
Signed-off-by: lgao4
Reviewed-by: ydong10 gdong1 tye jfan12 wli12 rsun3 jyao1 ftian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12376 6f19259b-4bc3-4df7-8a09-765794883524
|
|
and iSCSI MPIO.
Signed-off-by: tye1
Reviewed-by: hhuan13
Reviewed-by: eric_tian
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12149 6f19259b-4bc3-4df7-8a09-765794883524
|