Age | Commit message (Collapse) | Author | Files | Lines |
|
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
Bug 973 just mentions UsbBusDxe, but UsbBusPei has similar issue.
HUB descriptor has variable length.
But the code uses stack (HubDescriptor in PeiDoHubConfig) with fixed
length sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (12) for SuperSpeed path.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
HUB descriptor has variable length.
But the code uses stack (HubDesc in UsbHubInit) with fixed length
sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (32 that is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR)) for SuperSpeed path, then there will
be stack overflow when IOMMU is enabled because the Unmap operation
will copy the data from device buffer to host buffer.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
The definition EFI_USB_SUPER_SPEED_HUB_DESCRIPTOR is wrong (HubDelay
field should be UINT16 type) and no code is using it, the patch
removes it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
|
|
Replace old Perf macros with the new added ones.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Update the performance library instances in MdeModulePkg
to implement the APIs used for new added Perf macros.
V2:
Share the common logics of creating FPDT record for
new added Perf macros and existing Perf macros.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Remove the definitions of performance identifier since they
have been added into PerformanceLib.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Update Performance instances in MdeModulePkg to use new
PerformanceMeasurement protocol.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Add PerformanceMeasurement protocol to log performance info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Add guard macro for new added header file.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Constructor is too early that ConnectAll() may not do. Move refresh boot
option in form open.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Xu WeiX <weix.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
BdsEntry marks the read-only variables if the Variable Lock protocol exists.
So, this protocol usage is updated from CONSUMES to SOMETIMES_CONSUMES.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=256
This commit adds the PEI BlockIo support for NVM Express devices.
The driver will consume the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI for NVM
Express host controllers within the system. And then produces the
BlockIo(2) PPIs for each controller.
The implementation of this driver is currently based on the NVM Express 1.1
Specification, which is available at:
http://nvmexpress.org/resources/specifications/
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Introduces the below PPI:
struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
};
The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
address of each NVMe HC within the system;
The GetNvmeHcDevicePath service will provide the caller with the device
path information of each NVMe HC.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
The SATA controller driver crashes while accessing the
PCI memory [AHCI Base Registers (ABAR)], as the PCI memory
space is not enabled.
Enable the PCI memory space access to prevent the SATA
Controller driver from crashing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sivaraman Nainar <sivaramann@amiindia.co.in>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
CpuDxe driver is updated to be able to access DXE page table in SMM mode,
which means Heap Guard can get correct memory paging attributes in what
environment. It's not necessary to exclude SMM from detecting Heap Guard
feature support.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
The patch doesn't have functionality impact. It is just to make
VS2010/VS2012 happy.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
|
|
If the first call to UpdateImageProgress() fails, there is no point
in passing a pointer to it to Fmp->SetImage(), since it is highly
unlikely to succeed on any subsequent calls.
This permits the FMP implementation to fall back to an alternate means
of providing feedback to the user, e.g., via the console.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
When capsule updates are staged for processing after a warm reboot,
they are copied into memory with the MMU and caches enabled. When
the capsule PEI gets around to coalescing the capsule, the MMU and
caches may still be disabled, and so on architectures where uncached
accesses are incoherent with the caches (such as ARM and AARCH64),
we need to ensure that the data passed into UpdateCapsule() is
written back to main memory before performing the warm reboot.
Unfortunately, on ARM, the only type of cache maintenance instructions
that are suitable for this purpose operate on virtual addresses only,
and given that the UpdateCapsule() prototype includes the physical
address of a linked list of scatter/gather data structures that are
mapped at an address that is unknown to the firmware (and may not even
be mapped at all when UpdateCapsule() is invoked), we can only perform
this cache maintenance at boot time. Fortunately, both Windows and Linux
only invoke UpdateCapsule() before calling ExitBootServices(), so this
is not a problem in practice.
In the future, we may propose adding a secure firmware service that
permits performing the cache maintenance at OS runtime, in which case
this code may be enhanced to call that service if available. For now,
we just fail any UpdateCapsule() calls performed at OS runtime on ARM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Per PI spec, the Length value is the length of the ACPI descriptor
in bytes, excluding the first two fields.
The patch fixes the code to report the correct descriptor length
by excluding 3-byte first two fields.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Similar to commit 9dca2105ad960c9946d7cc2ece40f65e1999dac7, lower the
priority of the DEBUG print in SDReadWrite() to DEBUG_BLKIO.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=980
Adjust the DEBUG prints within function:
NvmeRead(), NvmeWrite(), AsyncNvmeRead() and AsyncNvmeWrite()
to DEBUG_BLKIO for the consistency with other storage device drivers
(e.g. ATA, USB and etc.).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Commit 180ac200da84785989443b06bcfa5db343c0bf7e changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Lower the priority of the DEBUG print in EmmcReadWrite(), which
is emitted for each read or write operation to the eMMC device,
which clutters up the log output of builds created with DEBUG_INFO
enabled.
Suggested-by: Pipat Methavanitpong <methavanitpong.pipat@socionext.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Put the UART in FIFO Polled Mode by clearing IER after setting FCR.
Also, add comments to show DLAB state for registers 0 and 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Star Zeng <star.zeng@intel.com>
CC: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
* Change Update_Image_Progress() to UpdateImageProcess()
* Call DisplayUpdateProgressLib from UpdateImageProgress().
* Split out a boot service and runtime version of
UpdateImageProgress() so the DisplayUpdateProgressLib is
not used at runtime.
* If gEdkiiFirmwareManagementProgressProtocolGuid is present,
then use its progress bar color and watchdog timer value.
* If gEdkiiFirmwareManagementProgressProtocolGuid is not present,
then use default progress bar color and 5 min watchdog timer.
* Remove Print() calls during capsule processing. Instead,
the DisplayUpdateProgressLib is used to inform the user
of progress during a capsule update.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
The patch adds AtaAtapiPolicy protocol which is produced by platform
and consumed by AtaAtapiPassThruDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
The patch adds support to certain devices that support PUIS (Power
up in Standby).
For those devices that supports SET_FEATURE spin up, SW needs to
send SET_FEATURE subcommand to spin up the devices.
For those devices that doesn't support SET_FEATURE spin up, SW needs
to send read sectors command to spin up the devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
NASM has replaced ASM and S files.
1. Remove ASM from all modules.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Make the comment align with Edk2 coding style.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
BootLogo protocol is not always required. If it not is installed,
BootManagerMenuApp can work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Because the DxeResetSystemLib calls gRT->ResetSystem(), make sure
the gRT->ResetSystem() implementation doesn't call into
DxeResetSystemLib to avoid chicken-egg issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
|
|
Current DxeResetSystemLib depends on UefiRuntimeLib because it calls
EfiResetSystem() API exposed by UefiRuntimeLib.
Due to the commit:
"MdePkg/UefiRuntimeLib: Do not allow to be linked by DXE driver"
which reverts UefiRuntimeLib to only support DXE_RUNTIME_DRIVER,
removing UefiRuntimeLib dependency makes the DxeResetSystemLib
can be used by DXE drivers.
The patch also disallows the DxeResetSystemLib to be linked by
runtime driver, SMM drivers.
Runtime driver cannot link to this library because the gRT is not
converted when entering to RT.
SMM driver cannot link to this library because calling RT services
from SMM after EndOfDxe violates security guideline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
|
|
Until now the possible errors returned from processing
boot firmware volume were not checked, which could cause
misbehavior in further booting stages. Add relevant assert.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
Add DisplayUpdateProgressLib instances for text consoles
and graphical consoles.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
Add the DisplayUpdateProgressLib class that is used
to inform the user of progress during updates of
firmware images in firmware devices. A platform
specific instance of this library can be used to
customize how the user is informed of progress.
Add the EDK II Firmware Management Progress Protocol.
This is an optional protocol that must be installed
onto the same handle as a Firmware Management Protocol.
This new protocol provides the color of a progress
bar that allows different firmware devices to use
different colors during a firmware update. It also
provides a watchdog timer value in seconds that is
armed each time the Progress() service passed
into Firmware Management Protocol SetImage()
is called.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Per PCIE spec, Memory Write and Invalidate is hardwired to 0b so
PciBus driver shouldn't write 1b to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
|
|
CreatePciIoDevice() detects whether the PCI device is a PCI Express
device and remembers the device type in PciIoDevice->IsPciExp.
RegisterPciDevice() detects the device type again which is
unnecessary. The detection logic can be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
|
|
Current code assumes the max bus(0xFF) is under this P2P bridge and
temporarily set it as subordinate bus.
It may cause silicon hangs during PCI enumeration in some specific
case.
Instead, it should get the max bus number from the bus number
resources returned from
PCI_HOST_BRIDGE_RESOURCE_ALLOCATION.StartBusEnumeration() and set it
as subordinate bus.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=741
Change VariableGetBestLanguage() parameter type from BOOLEAN to UINTN
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The PEIM in all cached FV image may be in registered for shadow status.
Current logic CurrentPeimFvCount is not enough.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
If Fvb is a NULL, return EFI_UNSUPPORTED.
If the remaining size is not enough, return EFI_OUT_OF_RESOURCES.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Fix the issue that failed to update or add a UEFI variable if the remaining size is equal to the data size
of the variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
RootBridgeIo.PollMem()/PollIo() originally don't count the IO/MMIO
access overhead when delaying.
The patch changes the implementation to count the access overhead
so that the actually delay equals to user required delay.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
|
|
AcpiPlatformDxe solely performs one-time tasks and does not expose
any services or create any events. Hence it can safely be unloaded
after the Entry Point execution by returning an error code.
V2: Return EFI_REQUEST_UNLOAD_IMAGE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|