| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
CoreConnectSingleController() searches for the Driver Family Override
Protocol drivers by looping and checking each Driver Binding Handles.
This loop can be skipped by checking if any Driver Family Override
Protocol installed in the platform first, to improve the performance.
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
|
|
CoreGetProtocolInterface() is called by CoreOpenProtocol(),
CoreCloseProtocol() and CoreOpenProtocolInformation().
Before CoreOpenProtocol() calls CoreGetProtocolInterface(), the input
parameter UserHandle has been already checked for validation. So does
CoreCloseProtocol().
Removing the handle validation check in CoreGetProtocolInterface()
could improve the performance, as CoreOpenProtocol() is called very
frequently.
To ensure the assumption that the caller of CoreGetProtocolInterface()
must pass in a valid UserHandle that is checked with CoreValidateHandle(),
add the parameter check in CoreOpenProtocolInformation(), and declare
CoreGetProtocolInterface() as static.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
|
|
This fixes messages like:
"Image type X64 can't be loaded on <Unknown> UEFI system"
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Chao Li <lichao@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Provide an optional method for PEI to declare a specific address
range to use for the Memory Type Information bins. The current
algorithm uses heuristics that tends to place the Memory Type
Information bins in the same location, but memory configuration
changes across boots or algorithm changes across a firmware
updates could potentially change the Memory Type Information bin
location. If the bin locations move across an S4 save/resume
cycle, then the S4 resume may fail. Enabling this feature
increases the number of scenarios that an S4 resume operation
may succeed.
If the HOB List contains a Resource Descriptor HOB that
describes tested system memory and has an Owner GUID of
gEfiMemoryTypeInformationGuid, then use the address range
described by the Resource Descriptor HOB as the preferred
location of the Memory Type Information bins. If this HOB is
not detected, then the current behavior is preserved.
The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is ignored for the following conditions:
* The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is smaller than the Memory Type Information bins.
* The HOB list contains more than one Resource Descriptor HOB
with an owner GUID of gEfiMemoryTypeInformationGuid.
* The Resource Descriptor HOB with an Owner GUID of
gEfiMemoryTypeInformationGuid is the same Resource Descriptor
HOB that that describes the PHIT memory range.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Aaron Li <aaron.li@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Update the DxeMain initialization order to initialize GCD
services before any runtime allocations are performed. This
is required to prevent runtime data fragmentation when the
UEFI System Table and UEFI Runtime Service Table are allocated
before both the memory and GCD services are initialized.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Aaron Li <aaron.li@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
PciIoMap () need to feedback the status of
mIoMmuProtocol->SetAttribute () return value.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4652
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Huang Jenny <jenny.huang@intel.com>
Cc: Chiang Chris <chris.chiang@intel.com>
Signed-off-by: Sheng Wei <w.sheng@intel.com>
|
|
REF: UEFI_Spec_2_10_Aug29.pdf page 1695.
In 35.5.4 EFI_HII_CONFIG_ACCESS_PROTOCOL.CallBack():
If the callback function returns with the ActionRequest set to
_QUESTION_APPLY, then the Forms Browser will write the current modified
question value on the selected form to storage.
Update the DriverSampleDxe, add a new question "Question apply test".
Signed-off-by: Ming Tan <ming.tan@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
REF: UEFI_Spec_2_10_Aug29.pdf page 1695.
In 35.5.4 EFI_HII_CONFIG_ACCESS_PROTOCOL.CallBack():
If the callback function returns with the ActionRequest set to
_QUESTION_APPLY, then the Forms Browser will write the current modified
question value on the selected form to storage.
Update the SetupBrowserDxe, if callback function return
EFI_BROWSER_ACTION_REQUEST_QUESTION_APPLY, then call SetQuestionValue
with GetSetValueWithHiiDriver to apply the change immediately.
Signed-off-by: Ming Tan <ming.tan@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
ResetSystem runtime call allows for sending reset data that
starts with a NULL terminated string. Add support to print
that string on console.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
This patch is to use the Context to indicate SMM Debug Agent support or
not if InitFlag is DEBUG_AGENT_INIT_SMM. Context must point to a
BOOLEAN if it's not NULL.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4533
There are use cases which not all FVs need be migrated from TempRam to
permanent memory before TempRam tears down. This new guid is introduced
to avoid unnecessary FV migration to improve boot performance. Platform
can publish MigrationInfo hob with this guid to customize FV migration
info, and PeiCore will only migrate FVs indicated by this Hob info.
This is a backwards compatible change, PeiCore will check MigrationInfo
hob before migration. If MigrationInfo hobs exists, only migrate FVs
recorded by hobs. If MigrationInfo hobs not exists, migrate all FVs to
permanent memory.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Cheng Sun <chengx.sun@intel.com>
|
|
Currently, the ReadyToBoot event is only signaled when a formal Boot
Manager option is executed (in BmBoot.c -> EfiBootManagerBoot ()).
However, the introduction of Platform Recovery in UEFI 2.5 makes it
necessary to signal ReadyToBoot when a Platform Recovery boot loader
runs because otherwise it may lead to the execution of a boot loader
that has similar requirements to a regular one that is not launched
as a Boot Manager option.
This is especially critical to ensuring that the graphical console is
actually usable during platform recovery, as some platforms do rely on
the ConsolePrefDxe driver, which only performs console initialization
after ReadyToBoot is triggered.
This patch fixes that behavior by calling EfiSignalEventReadyToBoot ()
in EfiBootManagerProcessLoadOption () when invoking platform recovery,
which is the function that sets up the platform recovery boot process.
The expected behavior has been clarified in the UEFI 2.10 specification
to explicitly indicate this behavior is required for correct operation.
This is a rebased version of the patch originally written by Pete Batard.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2831
Co-authored-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Neal Gompa <ngompa@fedoraproject.org>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
The DXE & MM standalone variant of AcpiTimerLib defines a global
named mPerformanceCounterFrequency. A global with an identical
name is also present in MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
Since XhciDxe has a dependency on TimerLib, this can cause link
errors due to the same symbol being defined twice if the platform
DSC chooses to use AcpiTimerLib as the TimerLib implementation for
any given platform.
To resolve this, I noted that some of the globals in Xhci.c are not
used outside of the Xhci.c compilation unit:
- mPerformanceCounterStartValue
- mPerformanceCounterEndValue
- mPerformanceCounterFrequency
- mPerformanceCounterValuesCached
I have changed the definition for all of these to static and added
an Xhci prefix. Since they are not used outside of the Xhci.c
compilation unit, there is no reason to have them exported as
globals.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
|
|
CoreLocateDevicePath is used in CoreInstallMultipleProtocolInterfaces to
check if a Device Path Protocol instance with the same device path is
alreay installed.
CoreLocateDevicePath is a generic API, and would introduce some
unnecessary overhead for such usage.
The optimization is:
1. Implement IsDevicePathInstalled to loop all the Device Path
Protocols installed and check if any of them matchs the given device
path.
2. Replace CoreLocateDevicePath with IsDevicePathInstalled in
CoreInstallMultipleProtocolInterfaces.
This optimization could save several seconds in PCI enumeration on a
system with many PCI devices.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4597
When creating a new variable, skip marking VAR_HEADER_VALID_ONLY so that
variable header + data update can be merged into one flash write. This
will greatly reduce the time taken for updating a variable and thus
increase performance. Removing VAR_HEADER_VALID_ONLY marking doesn't
have any function impact since it's not used by current code to detect
variable header + data corruption.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Gao Cheng <gao.cheng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
If the SetVirtualAddressMap() is not called, mIsVirtualAddrConverted
is FALSE and the kernel crash occurs in IsNestedFmpCapsule() when
executing gBS->LocateProtocol () in the else case.
To serve the omitted SetVirtualAddressMap() call, we could just check
mEsrtTable presence instead of relying on mIsVirtualAddrConverted.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Update DumpImageRecord() to be DumpImageRecords(), and improve
the debug output. The function will output at DEBUG_INFO instead,
and the function will be run in DXE and SMM
MAT logic when the MAT is installed at EndOfDxe on DEBUG builds.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Add logic to create and delete image properties records. Where
applicable, redirect existing code to use the new library.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Now that the bugs are fixed in the MAT logic, we can remove the
duplicate logic from PiSmmCore/MemoryAttributesTable.c and use
ImagePropertiesRecordLib instead.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Update function headers to clarify the contract of each function and
improve readability. Add NULL checks to all functions that take a
pointer as an argument. Add return status to functions that
may need to return early due to invalid input.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
SplitTable() does not properly handle the case where there is
an odd number of code regions within a loaded image. When there are
an odd number of code regions, at least one image region descriptor
is overwritten with uninitialized memory which has caused crashes
in the right conditions.
This failure cases is documented extensively in the following bugzilla:
https://bugzilla.tianocore.org/show_bug.cgi?id=4492
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
SplitRecord() does not handle the case where a memory descriptor
describes an image region plus extra pages before or after the
image region. This patch fixes this case by carving off the
unrelated regions into their own descriptors.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
|4K PAGE|DATA|CODE|DATA|CODE|DATA|4K PAGE|
Say the above memory region is currently one memory map descriptor.
The above image memory layout example contains two code sections
oriented in a way that maximizes the number of descriptors which
would be required to describe each section.
NOTE: It's unlikely that a data section would ever be between
two code sections, but it's still handled by the below formula
for correctness.
There are two code sections (let's say CodeSegmentMax == 2),
three data sections, and two unrelated memory regions flanking the
image. The number of required descriptors to describe this layout
will be 2 * 2 + 3 == 7. This patch updates the calculations to account
for the worst-case scenario.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Create a host-based unit test for the ImagePropertiesRecordLib
SplitTable() logic. This test has 4 cases which tests different
potential image and memory map layouts. 3/4 of these tests fail
with the logic in its current state to provide proof of the bugs
in the current MAT logic.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Move some DXE MAT logic to ImagePropertiesRecordLib to consolidate
code and enable unit testability.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
This patch updates MemoryAttributesTable.c to reduce reliance on global
variables and allow some logic to move to a library.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Create a library for manipulating image properties records. The
library is currently blank and will be filled in a future patch
to help with reviewer readability.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Ignore old style declaration warnings in oniguruma/src/st.c. This was
already ignored for MSFT, but newer versions of clang complain as well.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Nhi Pham <nhi@os.amperecomputing.com>
Tested-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Install the performance table into the UEFI configuration table.
This will allow the shell application to get this if the system
is not using ACPI.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Introduces two new APIs to EDKII_VARIABLE_POLICY_PROTOCOL:
1. GetVariablePolicyInfo()
2. GetLockOnVariableStateVariablePolicyInfo()
These allow a caller to retrieve policy information associated with
a UEFI variable given the variable name and vendor GUID.
GetVariablePolicyInfo() - Returns the variable policy applied to the
UEFI variable. If the variable policy is applied toward an individual
UEFI variable, that name can optionally be returned.
GetLockOnVariableStateVariablePolicyInfo() - Returns the Lock on
Variable State policy applied to the UEFI variable. If the Lock on
Variable State policy is applied to a specific variable name, that
name can optionally be returned.
These functions can be useful for a variety of purposes such as
auditing, testing, and functional flows.
Also fixed some variable name typos in code touched by the changes.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Message-Id: <20231030203112.736-2-mikuback@linux.microsoft.com>
|
|
Add PCD to control if modules with start addresses in PE/COFF > 0x100000
attempt to load at specified address.
If a module has an address in this range and there is untested memory
DxeCore will attempt to promote all memory to tested which bypasses any
memory testing that would occur later in boot.
There are several existing AARCH64 option roms that have base addresses
of 0x180000000.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Message-Id: <bd36c9c24158590db2226ede05cb8c2f50c93a37.1684194452.git.jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Apply uncrustify formatting to GoogleTest cpp files and respective
header file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Vivian Nowka-Keane <vnowkakeane@linux.microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Define the API for IPMI Get System Interface
Capabilities command (0x57)
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Nickle Wang <nicklew@nvidia.com>
|
|
Reference: https://github.com/tianocore/edk2/pull/4892
BmExpandPartitionDevicePath is called to expand "short-form" device paths
which are commonly used with OS boot options. To expand a device path, it
calls EfiBootManagerConnectAll to connect all the possible BlockIo
devices in the system to search for a matching partition. However, this
is sometimes unnecessary on certain platforms (such as OVMF/QEMU) because
the boot devices are previously explicity connected
(See: ConnectDevicesFromQemu). EfiBootManagerConnectAll calls are
extremely costly in terms of boot time and resources and should be avoided
whenever feasible.
(
OVMF call tree:
PlatformBootManagerAfterConsole() [OvmfPkg/Library/PlatformBootManagerLib/BdsPlatform.c]
PlatformBdsConnectSequence() [OvmfPkg/Library/PlatformBootManagerLib/BdsPlatform.c]
ConnectDevicesFromQemu() [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
...
EfiBootManagerRefreshAllBootOption() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
...
SetBootOrderFromQemu() [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
Match() [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
EfiBootManagerGetLoadOptionBuffer() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
BmGetNextLoadOptionBuffer() [MdeModulePkg/Library/UefiBootManagerLib/BmLoadOption.c]
BmGetNextLoadOptionDevicePath() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
BmExpandPartitionDevicePath() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
)
Therefore optimize BmExpandPartitionDevicePath to first search the
existing BlockIo handles for a match. If a match is not found, then
fallback to the original code to call EfiBootManagerConnectAll and search
again. Thus, this optimization should be extremely low-risk given the
fallback to previous behavior.
NOTE: The existing optimization in the code to use a "HDDP" variable to
save the last matched device paths does not cover the first time a boot
option is expanded (i.e. before the "HDDP" is created) nor when the device
configuration has changed (resulting in the boot device moving to a
different location in the PCI Bus/Dev hierarchy). This new optimization
covers both of these cases on requisite platforms which explicity connect
boot devices.
In our testing on OVMF/QEMU VMs with dozens of configured vnic devices,
these extraneous calls to EfiBootManagerConnectAll from
BmExpandPartitionDevicePath were found to cause many seconds (or even
minutes) of additional VM boot time in some cases - due to the vnics
being unnecessarily connected.
Cc: Zhichao Gao zhichao.gao@intel.com
Cc: Ray Ni ray.ni@intel.com
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Message-Id: <20231010150644.37857-1-Aaron.Young@oracle.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
[lersek@redhat.com: add OVMF call tree to commit message]
|
|
Adds a PrEval entry to the package's ci.yaml file which is used to
verify if the package uses a particular library instance when that
library instance file (INF) is updated.
When a library instance file (INF) is updated, PrEval will review each
package's DSC as described in the ci.yaml file to determine if the
package uses said library instance. If the package does use the library
instance, it will be built and tested to ensure the package is not
broken from the change.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Joey Vagedes <joeyvagedes@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Replace magic values used for checking Base Class, SubClass and Protocol
fields of USB Interface Descriptor.
Add definitions for Base Class EFh (Miscellaneous) and RNDIS subclass.
These definitions were taken from https://www.usb.org/defined-class-codes
Cc: Richard Ho <richardho@ami.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
|
|
This patch fixes wrong condition because of UINT16 value to integer
promotion. NumberMcFilters is UINT16 value, so when bitwise shift operator
applied to small integer type, the operation is preceded by integral
promotion. This is described in MISRA-C:2004 guideline as Rule 10.5:
"If the bitwise operators ~ and << are applied to an operand of underlying
type unsigned char or unsigned short, the result shall be immediately cast
to the underlying type of the operand."
A simple fix for this issue would be the following:
if ((UINT16)(UsbEthFunDescriptor.NumberMcFilters << 1) == 0)
But this patch proposes to use bitwise AND operation with a proper bit mask
rather than shifting to prevent similar mistakes in future.
Cc: Richard Ho <richardho@ami.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4560
TRB Template is 16 bytes. When boundary checking is 64 bytes for xHCI
device/host memory address, it may exceed xHCI host memory pool and
cause unwanted DXE_ASSERT. Introduce a new input parameter to indicate
whether to enforce 64byte size alignment and round up. For TRB case,
should set it to FALSE to skip the size round up.
Signed-off-by: Gao Cheng <gao.cheng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4544
These value of Major/Minor version are updated from SMBIOS memory data,
but BCD Revision is updated from PCD PcdSmbiosVersion.
We should also update BCD Revision from SMBIOS memory data,
to ensure that get consistent version value.
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: HoraceX Lien <horacex.lien@intel.com>
|
|
confroms should be conforms.
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=4552
Following XHCI spec 4.6.1.2, software may abort the
execution of Address Device Command when command failed
due to timeout.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: More Shih <more.shih@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Signed-off-by: Xianglei Cai <xianglei.cai@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2948
XhciDxe uses the timer functionality provided by the
boot services table to detect timeout conditions. This
breaks the driver's ExitBootServices call back, as
CoreExitBootServices halts the timer before signaling
the ExitBootServices event. If the host controller
fails to halt in the call back, the timeout condition
will never occur and the boot gets stuck in an indefinite
spin loop. Use the free running timer provided by
TimerLib to calculate timeouts, avoiding the potential
hang.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Patrick Henz <patrick.henz@hpe.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
The function UsbHcGetPciAddressForHostMem has
ASSERT ((Block != NULL)); and
and the function UsbHcFreeMem has
ASSERT (Block != NULL);
statement after for loop, but these are applicable only in DEBUG mode.
In RELEASE mode, if for whatever reasons there is no match inside for
loop and the loop exits because of Block != NULL; condition, then there
is no "Block" NULL pointer check afterwards and the code proceeds to do
dereferencing "Block" which will lead to CRASH.
Hence, for safety add NULL pointer checks always.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4211
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Veeresh Sangolli <veeresh.sangolli@dellteam.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
The function UhciConvertPollRate has a check
ASSERT (Interval != 0);
but this comes into play only in DEBUG mode. In Release mode, there is
no handling if the Interval parameter value is ZERO. To avoid shifting
by a negative amount later in the code flow in this undesirable case,
it is better to handle it as well by treating it same as if 1 is sent.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4211
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Veeresh Sangolli <veeresh.sangolli@dellteam.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
The code can reach line 65 only through the else path above at line 53.
The else path already has the same NULL check at line 55 and hence the
duplicate code lines are totally redundant which can be deleted.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4220
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Veeresh Sangolli <veeresh.sangolli@dellteam.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
Line number 365 does contain a typecast with UINT32, but it is after
all the operations (16-bit left shift followed by OR'ing) are over.
To avoid any SIGN_EXTENSION, typecast the intermediate result after
16-bit left shift operation immediately with UINT32.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4209
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
When finding a free page range for allocation, if the found range
starts below the tracked memory bin address range, the lowest
memory bin address is updated which will not include the guard page if
present. When CoreConvertPagesWithGuard() is called on the range
being allocated, the memory range is adjusted to include guard
pages which can push it out of the memory bin address range and
cause the memory type statistics to be unaltered.
This patch updates the lowest memory bin address range to account for
the guard page if NeedGuard is TRUE so the memory type statistics
are updated correctly.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Many arrays are defined with a length of MAX_MENU_NUMBER in
FormGuid.h. Two of those are BootOptionOrder and DriverOptionOrder.
In UpdatePage.c, a pointer is set to either of those arrays. The
array buffer is accessed using an index whose range is checked after
the pointer to the array is dereferenced. This change moves the check
before the dereference.
In another place in the file, the ConsoleCheck pointer is also set to
an array buffer with MAX_MENU_NUMBER elements. Only an ASSERT()
currently checks the range of the array index. This change
conditionalizes the pointer dereference itself on the range of Index.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
|
|
FvbDev->LbaCache must be freed on error path before freeing FvbDev.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
FwVolHeader must be freed on error path.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
