Age | Commit message (Collapse) | Author | Files | Lines |
|
The SATA controller driver crashes while accessing the
PCI memory [AHCI Base Registers (ABAR)], as the PCI memory
space is not enabled.
Enable the PCI memory space access to prevent the SATA
Controller driver from crashing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sivaraman Nainar <sivaramann@amiindia.co.in>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
CpuDxe driver is updated to be able to access DXE page table in SMM mode,
which means Heap Guard can get correct memory paging attributes in what
environment. It's not necessary to exclude SMM from detecting Heap Guard
feature support.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Update code to use more meaningful constant macro or predefined
register structure.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
The MdePkg/Library/SmmMemoryAllocationLib, used only by DXE_SMM_DRIVER,
allows to free memory allocated in DXE (before EndOfDxe). This is done
by checking the memory range and calling gBS services to do real
operation if the memory to free is out of SMRAM. If some memory related
features, like Heap Guard, are enabled, gBS interface will turn to
EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes(), provided by
DXE driver UefiCpuPkg/CpuDxe, to change memory paging attributes. This
means we have part of DXE code running in SMM mode in certain
circumstances.
Because page table in SMM mode is different from DXE mode and CpuDxe
always uses current registers (CR0, CR3, etc.) to get memory paging
attributes, it cannot get the correct attributes of DXE memory in SMM
mode from SMM page table. This will cause incorrect memory manipulations,
like fail the releasing of Guard pages if Heap Guard is enabled.
The solution in this patch is to store the DXE page table information
(e.g. value of CR0, CR3 registers, etc.) in a global variable of CpuDxe
driver. If CpuDxe detects it's in SMM mode, it will use this global
variable to access page table instead of current processor registers.
This can avoid retrieving wrong DXE memory paging attributes and changing
SMM page table attributes unexpectedly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
On AMD processors the second SendIpi in the SendInitSipiSipi and
SendInitSipiSipiAllExcludingSelf routines is not required, and may cause
undesired side-effects during MP initialization.
This patch leverages the StandardSignatureIsAuthenticAMD check to exclude
the second SendIpi and its associated MicroSecondDelay (200).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
This commit enhances the bitmap fields defined in the IPMI header files,
union types will be used to provide the users with both the individual
bitmap access and the whole byte/word access.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=814
This commit updates the IPMI related header files.
Cc: Younas Khan <pmdyounaskhan786@gmail.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The patch doesn't have functionality impact. It is just to make
VS2010/VS2012 happy.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
|
|
Currently, DebugCommunicationLibUsb uses the hardcoded endpoints 0x82
and 0x01 to communicate with the EHCI Debug Device. These, however,
are not standardized and may vary across different hardware.
To solve this problem, the endpoints are retrieved from the
USB Device Descriptor directly.
V2:
- Store endpoint data in the USB Debug Port handle structure.
V3:
- Remove the static endpoint PCDs as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
|
|
Commit c14b58614ffb992dfc668966a19becb86614aafc added a few build
error message display calls to WorkspaceCommon.py without importing
the message resources explicitely. This commit adds imports the
missing directives.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
Clang complains about left shifting a negative value being undefined.
EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c:151:30:
error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
OutputData = (UINT8)((~DLAB<<7)|((BreakSet<<6)|((Parity<<3)|((StopBits<<2)| Data))));
Redefine all bit pattern constants as unsigned to work around this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Align the prototype of ArmMtlLib's MtlWaitUntilChannelFree () with the
one in the ArmMtlNullLib implementation (rather than the other way around,
since edk2-platforms has a conflicting implementation as well)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Create the missing NOOPT target for CLANG35 (which is ARM and AARCH64
only), and align it with the other toolchains: NOOPT has optimizations
disabled entirely (for source level debugging), and DEBUG is changed
from -O0 to -O1, as is the case for CLANG38 as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
As reported by Liming, GCC 4.9.2 does not support the -no-pie
linker option that we added to the GCC49 and GCC5 toolchain
profiles in commit c25d3905523a ("BaseTools/tools_def IA32:
disable PIE code generation explicitly") to work around issues
with recent distro toolchains that enable PIE code generation
by default.
So rollback the changes for GCC49 but preserve them for GCC5
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Implement ResetSystemLib's EnterS3WithImmediateWake() routine using
a jump back to the PEI entry point with interrupts and MMU+caches
disabled. This is only possible at boot time, when we are sure that
the current CPU is the only one up and running. Also, it depends on
the platform whether the PEI code is preserved in memory (it may be
copied to DRAM rather than execute in place), so also add a feature
PCD to selectively enable this feature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
If the first call to UpdateImageProgress() fails, there is no point
in passing a pointer to it to Fmp->SetImage(), since it is highly
unlikely to succeed on any subsequent calls.
This permits the FMP implementation to fall back to an alternate means
of providing feedback to the user, e.g., via the console.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
When capsule updates are staged for processing after a warm reboot,
they are copied into memory with the MMU and caches enabled. When
the capsule PEI gets around to coalescing the capsule, the MMU and
caches may still be disabled, and so on architectures where uncached
accesses are incoherent with the caches (such as ARM and AARCH64),
we need to ensure that the data passed into UpdateCapsule() is
written back to main memory before performing the warm reboot.
Unfortunately, on ARM, the only type of cache maintenance instructions
that are suitable for this purpose operate on virtual addresses only,
and given that the UpdateCapsule() prototype includes the physical
address of a linked list of scatter/gather data structures that are
mapped at an address that is unknown to the firmware (and may not even
be mapped at all when UpdateCapsule() is invoked), we can only perform
this cache maintenance at boot time. Fortunately, both Windows and Linux
only invoke UpdateCapsule() before calling ExitBootServices(), so this
is not a problem in practice.
In the future, we may propose adding a secure firmware service that
permits performing the cache maintenance at OS runtime, in which case
this code may be enhanced to call that service if available. For now,
we just fail any UpdateCapsule() calls performed at OS runtime on ARM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Check the return value of HiiGetBrowserData() before calling HiiSetBrowserData().
HiiGetBrowserData() failed to retrieve NV data during action EFI_BROWSER_ACTION_RETRIEVE.
If NV data is invalid, stop sending it to form browser.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
|
|
This patch gets PL011 baud rate clock from
pl011 uart clock lib instead of Pcd.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
https://www.python.org/dev/peps/pep-0008/
Cc: Yanyan Sun <yanyan.sun@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
Update to be compatible with both Python 2.x and Python 3.x.
Also return error code 1 when an error is detected to support
use of this tool in scripts.
Cc: Yanyan Sun <yanyan.sun@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=974
https://bugzilla.tianocore.org/show_bug.cgi?id=965
Update help to state that --offset must be 8-byte aligned.
Verify that --offset is 8-byte aligned and print an error
message if it is not 8-byte aligned.
Cc: Yanyan Sun <yanyan.sun@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=963
Update error message for --type HII. If either --variable-guid
or --variable-name is missing, then print an error message that
states that both --variable-guid and --variable-name are required.
Cc: Yanyan Sun <yanyan.sun@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=962
Change "PcdToBin" to "BinToPcd"
Cc: Yanyan Sun <yanyan.sun@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
Add QemuRamfbDxe to dsc and fdf files for ArmVirt package.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Add QemuRamfbDxe device path to the list of platform console devices,
so ConSplitter will pick up the device even though it isn't a PCI GPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Add a driver for the qemu ramfb display device.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[lersek@redhat.com: fix INF banner typo]
[lersek@redhat.com: make some local variable definitions more idiomatic]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Add GUID header file for the QemuRamfbDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Per PI spec, the Length value is the length of the ACPI descriptor
in bytes, excluding the first two fields.
The patch fixes the code to report the correct descriptor length
by excluding 3-byte first two fields.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
According the module type to include the header file.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=867
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Some platform support dynamic clocking, which is controlled by some
jumper setting or hardware registers. Result of that is that PCD
PL011UartClkInHz would need to be updated for frequency change.
This patch implements support for dynamic frequency for PL011 uart.
This patch implements default lib, which is using Pcd. Platform which
needs dynamic clocking needs implement PL011UartClockLib
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
V3:
support exclude dir and file by name while traversing the directory.
remove close in with statement.
V2:
add version,description,copyright.
add flag -v,-q,--append-extensions,--override-extensions,--debug.
-q will omit default output,-v and --debug are not implemented.
add default file extensions.
support input of file path.
support muliple input path.
simplify comment.
change 'pattern'.encode() to b'pattern',I think this will be better.
change naming of variable and function to keep the same with BinToPcd.py
V1:
FormatDosFiles.py is added to clean up dos source files. It bases on
the rules defined in EDKII C Coding Standards Specification.
5.1.2 Do not use tab characters
5.1.6 Only use CRLF (Carriage Return Line Feed) line endings.
5.1.7 All files must end with CRLF
No trailing white space in one line. (To be added in spec)
The source files in edk2 project with the below postfix are dos format.
.h .c .nasm .nasmb .asm .S .inf .dec .dsc .fdf .uni .asl .aslc .vfr .idf
.txt .bat .py
The package maintainer can use this script to clean up all files in his
package. The prefer way is to create one patch per one package.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
|
|
Similar to commit 9dca2105ad960c9946d7cc2ece40f65e1999dac7, lower the
priority of the DEBUG print in SDReadWrite() to DEBUG_BLKIO.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=980
Adjust the DEBUG prints within function:
NvmeRead(), NvmeWrite(), AsyncNvmeRead() and AsyncNvmeWrite()
to DEBUG_BLKIO for the consistency with other storage device drivers
(e.g. ATA, USB and etc.).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
refactoring almost identical functions to delete and use the other.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
|
|
The case is DSC file include file1, file1 include file2, after parse
file2 finished, DSC parser get the wrong section type, then it would
report invalid error.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Currently in DP, the Trace mode is enabled by default.
And the profile mode is not implemented. but the help info
of DP tool doesn't match current implementation. Which will
make user confused. So now remove the unused source code
related to the profile mode and update the help information
of DP tool.
V2: Remove the unused code related to profile mode.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Issue:
When run "dp -s" or ("dp -v") command in shell several times,
the summary reuslts are different each time.
The root cause is that the previous global data "SummaryData"
is not cleaned when the dp command is callled next time.
This patch initializes the global data "SummaryData"
when the dp dymanic command is called.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Run dp command now:
Firstly it will get performance records from FPDT and then
parse the DP command. And if encounter invalid parameters,
it will exit directly. Thus the performance records got before
are invalid. And what's worse is that the memory allocated in
getting performance records phase is not freed.
This patch update the code to parse the command firstly and
then get the performance records. And make sure that all the
clean work has been done before exiting.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
As a security measure, some distros now build their GCC toolchains with
PIE code generation enabled by default, because it is a prerequisite
for ASLR to be enabled when running the executable.
This typically results in slightly larger code, but it also generates
ELF relocations that our tooling cannot deal with, so let's disable it
explicitly when using GCC49 or later for IA32. (Note that this does not
apply to X64: it uses PIE code deliberately in some cases, and our
tooling does deal with the resuling relocations)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Commit 180ac200da84785989443b06bcfa5db343c0bf7e changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Commit cb96e7d4f7afdbaef0706f9251ae479639d85a28 changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Commit d2aafe1e410c80d1046f2d1e743055882ead8489 changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Switch to the new IoLib implementation that will only use KVM
safe instructions to perform MMIO memory accesses.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
KVM on ARM refuses to decode load/store instructions used to perform
I/O to emulated devices, and instead relies on the exception syndrome
information to describe the operand register, access size, etc.
This is only possible for instructions that have a single input/output
register (as opposed to ones that increment the offset register, or
load/store pair instructions, etc). Otherwise, QEMU crashes with the
following error
error: kvm run failed Function not implemented
R00=01010101 R01=00000008 R02=00000048 R03=08000820
R04=00000120 R05=7faaa0e0 R06=7faaa0dc R07=7faaa0e8
R08=7faaa0ec R09=7faaa088 R10=000000ff R11=00000080
R12=ff000000 R13=7fccfe08 R14=7faa835f R15=7faa887c
PSR=800001f3 N--- T svc32
QEMU: Terminated
and KVM produces a warning such as the following in the kernel log
kvm [17646]: load/store instruction decoding not implemented
The IoLib implementation provided by MdePkg/Library/BaseIoLibIntrinsic
is based on C code, and when LTO is in effect, the MMIO accesses could
be merged with, e.g., manipulations of the loop counter, producing
opcodes that KVM does not support for emulated MMIO.
So let's add a special ArmVirt flavor of this library that implements
that actual load/store operations in assembler, ensuring that the
instructions involved can be emulated by KVM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|