diff options
Diffstat (limited to 'Vlv2TbltDevicePkg/Library/I2CLibPei')
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CAccess.h | 44 | ||||
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.c | 46 | ||||
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.h | 30 | ||||
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.c | 178 | ||||
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.h | 153 | ||||
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.c | 638 | ||||
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.h | 280 | ||||
| -rw-r--r-- | Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.inf | 40 |
8 files changed, 0 insertions, 1409 deletions
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CAccess.h b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CAccess.h deleted file mode 100644 index bf6ef4c..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CAccess.h +++ /dev/null @@ -1,44 +0,0 @@ -/** @file
- Misc Registers Definition.
-
- Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
---*/
-
-#ifndef _I2C_ACCESS_H_
-#define _I2C_ACCESS_H_
-
-#include "I2CIoLibPei.h"
-
-#define DEFAULT_PCI_BUS_NUMBER_PCH 0
-
-#define PCI_DEVICE_NUMBER_PCH_LPC 31
-#define PCI_FUNCTION_NUMBER_PCH_LPC 0
-
-#define R_PCH_LPC_ACPI_BASE 0x40 // ABASE, 16bit
-#define R_PCH_LPC_ACPI_BASEADR 0x400 // ABASE, 16bit
-#define B_PCH_LPC_ACPI_BASE_EN BIT1 // Enable Bit
-#define B_PCH_LPC_ACPI_BASE_BAR 0x0000FF80 // Base Address, 128 Bytes
-#define V_PCH_ACPI_PM1_TMR_MAX_VAL 0x1000000 // The timer is 24 bit overflow
-#define B_PCH_ACPI_PM1_TMR_VAL 0xFFFFFF // The timer value mask
-
-#define R_PCH_ACPI_PM1_TMR 0x08 // Power Management 1 Timer
-#define V_PCH_ACPI_PM1_TMR_FREQUENCY 3579545 // Timer Frequency
-
-
-#define PchLpcPciCfg8(Register) I2CLibPeiMmioRead8 (MmPciAddress (0, DEFAULT_PCI_BUS_NUMBER_PCH, PCI_DEVICE_NUMBER_PCH_LPC, 0, Register))
-
-#define PCIEX_BASE_ADDRESS 0xE0000000
-#define PCI_EXPRESS_BASE_ADDRESS ((VOID *) (UINTN) PCIEX_BASE_ADDRESS)
-
-#define MmPciAddress( Segment, Bus, Device, Function, Register ) \
- ( (UINTN)PCI_EXPRESS_BASE_ADDRESS + \
- (UINTN)(Bus << 20) + \
- (UINTN)(Device << 15) + \
- (UINTN)(Function << 12) + \
- (UINTN)(Register) \
- )
-#endif
-
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.c b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.c deleted file mode 100644 index d5f8dfd..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.c +++ /dev/null @@ -1,46 +0,0 @@ -/** @file
- MicroSecondDelay implementation of ACPI Timer.
-
- Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
---*/
-
-#include "PiPei.h"
-#include "I2CAccess.h"
-#include "I2CDelayPei.h"
-#include <Library/DebugLib.h>
-#include <Library/PeiServicesTablePointerLib.h>
-#include <Ppi/Stall.h>
-
-/**
- Stalls the CPU for at least the given number of microseconds.
- Stalls the CPU for the number of microseconds specified by MicroSeconds.
-
- @param MicroSeconds The minimum number of microseconds to delay.
-
- @return EFI_STATUS
-
-**/
-EFI_STATUS
-EFIAPI
-MicroSecondDelay (
- IN UINTN MicroSeconds
- )
-{
-
- EFI_PEI_STALL_PPI *StallPpi;
- EFI_STATUS Status;
- CONST EFI_PEI_SERVICES **PeiServices;
-
- PeiServices = GetPeiServicesTablePointer();
-
-
- Status = (**PeiServices).LocatePpi (PeiServices, &gEfiPeiStallPpiGuid, 0, NULL, &StallPpi);
- ASSERT(!EFI_ERROR(Status));
-
- StallPpi->Stall (PeiServices, StallPpi, MicroSeconds);
-
- return EFI_SUCCESS;
-}
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.h b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.h deleted file mode 100644 index 604f1f6..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CDelayPei.h +++ /dev/null @@ -1,30 +0,0 @@ -/** @file
- MicroSecondDelay implementation of ACPI Timer.
-
- Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __I2C_DELAY_PEI__
-
-#define __I2C_DELAY_PEI__
-#include "PiPei.h"
-
-/**
- Stalls the CPU for at least the given number of microseconds.
-
- Stalls the CPU for the number of microseconds specified by MicroSeconds.
-
- @param MicroSeconds The minimum number of microseconds to delay.
-
- @return MicroSeconds
-
-**/
-EFI_STATUS
-EFIAPI
-MicroSecondDelay (
- IN UINTN MicroSeconds
- );
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.c b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.c deleted file mode 100644 index 6a37dbe..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.c +++ /dev/null @@ -1,178 +0,0 @@ -/** @file
- Functions for access I2C MMIO register.
-
- Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <PiPei.h>
-#include <Library/DebugLib.h>
-#include <Library/PeiServicesTablePointerLib.h>
-
-/**
- Reads an 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address. The 8-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT8
-EFIAPI
-I2CLibPeiMmioRead8 (
- IN UINTN Address
- )
-{
- UINT8 Value;
-
- Value = *(volatile UINT8*)Address;
- return Value;
-}
-
-/**
- Reads a 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address. The 16-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-I2CLibPeiMmioRead16 (
- IN UINTN Address
- )
-{
- UINT16 Value;
-
- ASSERT ((Address & 1) == 0);
- Value = *(volatile UINT16*)Address;
- return Value;
-}
-
-/**
- Writes a 16-bit MMIO register.
-
- Writes the 16-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
- @return Value.
-
-**/
-UINT16
-EFIAPI
-I2CLibPeiMmioWrite16 (
- IN UINTN Address,
- IN UINT16 Value
- )
-{
- ASSERT ((Address & 1) == 0);
- *(volatile UINT16*)Address = Value;
- return Value;
-}
-
-/**
- Reads a 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address. The 32-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-I2CLibPeiMmioRead32 (
- IN UINTN Address
- )
-{
- UINT32 Value;
-
- ASSERT ((Address & 3) == 0);
- Value = *(volatile UINT32*)Address;
-
- return Value;
-}
-
-/**
- Writes a 32-bit MMIO register.
-
- Writes the 32-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
- @return Value.
-
-**/
-UINT32
-EFIAPI
-I2CLibPeiMmioWrite32 (
- IN UINTN Address,
- IN UINT32 Value
- )
-{
- ASSERT ((Address & 3) == 0);
- *(volatile UINT32*)Address = Value;
- return Value;
-}
-
-/**
- OR a 32-bit MMIO register.
-
- OR the 32-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The MMIO register to write OR.
- @param Value The value to OR to the MMIO register.
-
- @return Value.
-
-**/
-UINT32
-EFIAPI
-I2CLibPeiMmioOr32 (
- IN UINTN Address,
- IN UINT32 OrData
- )
-{
- return I2CLibPeiMmioWrite32 (Address, I2CLibPeiMmioRead32(Address) | OrData);
-}
-
-
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.h b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.h deleted file mode 100644 index b68bc1e..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CIoLibPei.h +++ /dev/null @@ -1,153 +0,0 @@ -/** @file
- Functions for access I2C MMIO register.
-
- Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __I2C_IOLIB_PEI__
-
-#define __I2C_IOLIB_PEI__
-#include <PiPei.h>
-
-
-/**
- Reads an 8-bit MMIO register.
-
- Reads the 8-bit MMIO register specified by Address. The 8-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 8-bit MMIO register operations are not supported, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-
-UINT8
-EFIAPI
-I2CLibPeiMmioRead8 (
- IN UINTN Address
- );
-
-
-/**
- Reads a 16-bit MMIO register.
-
- Reads the 16-bit MMIO register specified by Address. The 16-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-I2CLibPeiMmioRead16 (
- IN UINTN Address
- );
-
-
-/**
- Writes a 16-bit MMIO register.
-
- Writes the 16-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 16-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
- @return Value.
-
-**/
-UINT16
-EFIAPI
-I2CLibPeiMmioWrite16 (
- IN UINTN Address,
- IN UINT16 Value
- );
-
-
-/**
- Reads a 32-bit MMIO register.
-
- Reads the 32-bit MMIO register specified by Address. The 32-bit read value is
- returned. This function must guarantee that all MMIO read and write
- operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-I2CLibPeiMmioRead32 (
- IN UINTN Address
- );
-
-
-/**
- Writes a 32-bit MMIO register.
-
- Writes the 32-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
- @return Value.
-
-**/
-UINT32
-EFIAPI
-I2CLibPeiMmioWrite32 (
- IN UINTN Address,
- IN UINT32 Value
- );
-
-
-/**
- OR a 32-bit MMIO register.
-
- OR the 32-bit MMIO register specified by Address with the value specified
- by Value and returns Value. This function must guarantee that all MMIO read
- and write operations are serialized.
-
- If 32-bit MMIO register operations are not supported, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The MMIO register to write OR.
- @param Value The value to OR to the MMIO register.
-
- @return Value.
-
-**/
-UINT32
-EFIAPI
-I2CLibPeiMmioOr32 (
- IN UINTN Address,
- IN UINT32 OrData
- );
-
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.c b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.c deleted file mode 100644 index dd5cceb..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.c +++ /dev/null @@ -1,638 +0,0 @@ -/** @file
- I2C PEI Lib Instance.
-
- Copyright (c) 1999- 2015, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include "I2CDelayPei.h"
-#include "I2CIoLibPei.h"
-#include "I2CAccess.h"
-#include "I2CLibPei.h"
-#include <PlatformBaseAddresses.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/PeiServicesTablePointerLib.h>
-#include <Library/HobLib.h>
-#include <PchRegs/PchRegsPcu.h>
-#include <PchRegs/PchRegsLpss.h>
-
-#define LPSS_PCI_DEVICE_NUMBER 8
-
-#define R_PCH_LPIO_I2C_MEM_RESETS 0x804 // Software Reset
-#define B_PCH_LPIO_I2C_MEM_RESETS_FUNC BIT1 // Function Clock Domain Reset
-#define B_PCH_LPIO_I2C_MEM_RESETS_APB BIT0 // APB Domain Reset
-#define R_PCH_LPSS_I2C_MEM_PCP 0x800 // Private Clock Parameters
-
-#define PEI_TEPM_LPSS_DMA_BAR 0xFE900000
-#define PEI_TEPM_LPSS_I2C0_BAR 0xFE910000
-#define PCI_CONFIG_SPACE_SIZE 0x10000
-
-EFI_GUID mI2CPeiInitGuid = {
- 0x96DED71A, 0xB9E7, 0x4EAD, 0x96, 0x2C, 0x01, 0x69, 0x3C, 0xED, 0x2A, 0x64
-};
-
-
-UINT16 I2CGPIO[]= {
- //
- // 19.1.6 I2C0
- // I2C0_SDA-OD-O - write 0x2003CC81 to IOBASE + 0x0210
- // I2C0_SCL-OD-O - write 0x2003CC81 to IOBASE + 0x0200
- //
- 0x0210,
- 0x0200,
-
- //
- // 19.1.7 I2C1
- // I2C1_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x01F0
- // I2C1_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x01E0
- //
- 0x01F0,
- 0x01E0,
-
- //
- // 19.1.8 I2C2
- // I2C2_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x01D0
- // I2C2_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x01B0
- //
- 0x01D0,
- 0x01B0,
-
- //
- // 19.1.9 I2C3
- // I2C3_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x0190
- // I2C3_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x01C0
- //
- 0x0190,
- 0x01C0,
-
- //
- // 19.1.10 I2C4
- // I2C4_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x01A0
- // I2C4_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x0170
- //
- 0x01A0,
- 0x0170,
-
- //
- // 19.1.11 I2C5
- // I2C5_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x0150
- // I2C5_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x0140
- //
- 0x0150,
- 0x0140,
-
- //
- // 19.1.12 I2C6
- // I2C6_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x0180
- // I2C6_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x0160
- //
- 0x0180,
- 0x0160
-};
-
-/**
- Constructor of this library.
-
- @param VOID
-
- @return EFI_SUCCESS
-**/
-EFI_STATUS
-EFIAPI
-IntelI2CPeiLibConstructor (
- IN EFI_PEI_FILE_HANDLE FileHandle,
- IN CONST EFI_PEI_SERVICES **PeiServices
- )
-{
- UINTN Index;
-
- for (Index = 0; Index < sizeof(I2CGPIO)/sizeof(UINT16); Index ++) {
- I2CLibPeiMmioWrite32(IO_BASE_ADDRESS+I2CGPIO[Index], 0x2003CC81);
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Programe all I2C controllers on LPSS.
-
- I2C0 is function 1 of LPSS. I2C1 is function 2 of LPSS, etc..
-
- @param VOID
-
- @return EFI_SUCCESS
-**/
-EFI_STATUS
-ProgramPciLpssI2C (
- VOID
- )
-{
- UINT32 PmcBase;
- UINT32 DevID;
- UINTN PciMmBase=0;
- UINTN Index;
- UINTN Bar0;
- UINTN Bar1;
- DEBUG ((EFI_D_INFO, "Pei ProgramPciLpssI2C() Start\n"));
-
- //
- // Set the VLV Function Disable Register to ZERO
- //
- PmcBase = I2CLibPeiMmioRead32(PciD31F0RegBase + R_PCH_LPC_PMC_BASE) & B_PCH_LPC_PMC_BASE_BAR;
-
- if(I2CLibPeiMmioRead32(PmcBase + R_PCH_PMC_FUNC_DIS)&
- (B_PCH_PMC_FUNC_DIS_LPSS2_FUNC1 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC2
- | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC3 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC4 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC5
- | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC6 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC7)) {
- I2CLibPeiMmioWrite32(
- PmcBase+R_PCH_PMC_FUNC_DIS,
- I2CLibPeiMmioRead32(PmcBase + R_PCH_PMC_FUNC_DIS)& \
- ~(B_PCH_PMC_FUNC_DIS_LPSS2_FUNC1 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC2 \
- | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC3 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC4 \
- | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC5 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC6|B_PCH_PMC_FUNC_DIS_LPSS2_FUNC7)
- );
- DEBUG ((EFI_D_INFO, "ProgramPciLpssI2C() enable all I2C controllers\n"));
- }
-
- for(Index = 0; Index < LPSS_PCI_DEVICE_NUMBER; Index ++) {
-
- PciMmBase = MmPciAddress (
- 0,
- DEFAULT_PCI_BUS_NUMBER_PCH,
- PCI_DEVICE_NUMBER_PCH_LPSS_I2C,
- Index,
- 0
- );
- DevID = I2CLibPeiMmioRead32(PciMmBase);
-
- Bar0 = PEI_TEPM_LPSS_DMA_BAR + (Index * PCI_CONFIG_SPACE_SIZE);
- Bar1 = Bar0 + 0x8000;
-
- DEBUG((EFI_D_ERROR, "Program Pci Lpss I2C Device Function=%x DevID=%08x\n", Index, DevID));
-
- //
- // Check if device present
- //
- if (DevID != 0xFFFFFFFF) {
- if(!(I2CLibPeiMmioRead32 (PciMmBase + R_PCH_LPSS_I2C_STSCMD) & B_PCH_LPSS_I2C_STSCMD_MSE)) {
- //
- // Program BAR 0
- //
- I2CLibPeiMmioWrite32((UINTN) (PciMmBase + R_PCH_LPSS_I2C_BAR), (UINT32)(Bar0 & B_PCH_LPSS_I2C_BAR_BA));
-
- DEBUG ((EFI_D_ERROR, "I2CBaseAddress1 = 0x%x \n",I2CLibPeiMmioRead32 (PciMmBase+R_PCH_LPSS_I2C_BAR)));
-
- //
- // Program BAR 1
- //
- I2CLibPeiMmioWrite32 ((UINTN)(PciMmBase + R_PCH_LPSS_I2C_BAR1), (UINT32)(Bar1 & B_PCH_LPSS_I2C_BAR1_BA));
- DEBUG ((EFI_D_ERROR, "I2CBaseAddress1 = 0x%x \n",I2CLibPeiMmioRead32(PciMmBase+R_PCH_LPSS_I2C_BAR1)));
-
- //
- // Bus Master Enable & Memory Space Enable
- //
- I2CLibPeiMmioWrite32((UINTN) (PciMmBase + R_PCH_LPSS_I2C_STSCMD), (UINT32)(B_PCH_LPSS_I2C_STSCMD_BME | B_PCH_LPSS_I2C_STSCMD_MSE));
- }
-
- //
- // Release Resets
- //
- I2CLibPeiMmioWrite32 (Bar0 + R_PCH_LPIO_I2C_MEM_RESETS, (B_PCH_LPIO_I2C_MEM_RESETS_FUNC | B_PCH_LPIO_I2C_MEM_RESETS_APB));
-
- //
- // Activate Clocks
- //
- I2CLibPeiMmioWrite32 (Bar0 + R_PCH_LPSS_I2C_MEM_PCP, 0x80020003);//No use for A0
-
- DEBUG ((EFI_D_INFO, "ProgramPciLpssI2C() Programmed()\n"));
- }
-
- }
-
- DEBUG ((EFI_D_INFO, "Pei ProgramPciLpssI2C() End\n"));
-
- return EFI_SUCCESS;
-}
-
-/**
- Disable I2C Bus.
-
- @param I2cControllerIndex Index of I2C controller.
-
- @return EFI_SUCCESS
-**/
-EFI_STATUS
-I2cDisable (
- IN UINT8 I2cControllerIndex
- )
-{
- UINTN I2CBaseAddress;
- UINT32 NumTries = 10000; // 0.1 seconds
-
- I2CBaseAddress = (UINT32) PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE;
-
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_ENABLE, 0);
- while (0 != ( I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_ENABLE_STATUS ) & 1)) {
- MicroSecondDelay (10);
- NumTries --;
- if(0 == NumTries) return EFI_NOT_READY;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Enable I2C Bus.
-
- @param I2cControllerIndex Index of I2C controller.
-
- @return EFI_SUCCESS
-**/
-EFI_STATUS
-I2cEnable (
- IN UINT8 I2cControllerIndex
- )
-{
- UINTN I2CBaseAddress;
- UINT32 NumTries = 10000; // 0.1 seconds
-
- I2CBaseAddress = (UINT32) PEI_TEPM_LPSS_I2C0_BAR+ I2cControllerIndex * PCI_CONFIG_SPACE_SIZE;
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_ENABLE, 1);
- while (0 == ( I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_ENABLE_STATUS ) & 1)) {
- MicroSecondDelay (10);
- NumTries --;
- if(0 == NumTries) return EFI_NOT_READY;
- }
-
- return EFI_SUCCESS;
-}
-
-
-/**
- Set the I2C controller bus clock frequency.
-
- @param[in] This Address of the library's I2C context structure
- @param[in] PlatformData Address of the platform configuration data
- @param[in] BusClockHertz New I2C bus clock frequency in Hertz
-
- @retval RETURN_SUCCESS The bus frequency was set successfully.
- @retval RETURN_UNSUPPORTED The controller does not support this frequency.
-
-**/
-EFI_STATUS
-I2cBusFrequencySet (
- IN UINTN I2CBaseAddress,
- IN UINTN BusClockHertz,
- IN UINT16 *I2cMode
- )
-{
- DEBUG((EFI_D_INFO,"InputFreq BusClockHertz: %d\r\n",BusClockHertz));
-
- *I2cMode = B_IC_RESTART_EN | B_IC_SLAVE_DISABLE | B_MASTER_MODE;
-
- //
- // Set the 100 KHz clock divider
- //
- // From Table 10 of the I2C specification
- //
- // High: 4.00 uS
- // Low: 4.70 uS
- //
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_SS_SCL_HCNT, (UINT16)0x214 );
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_SS_SCL_LCNT, (UINT16)0x272 );
-
- //
- // Set the 400 KHz clock divider
- //
- // From Table 10 of the I2C specification
- //
- // High: 0.60 uS
- // Low: 1.30 uS
- //
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_FS_SCL_HCNT, (UINT16)0x50 );
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_FS_SCL_LCNT, (UINT16)0xAD );
-
- switch ( BusClockHertz ) {
- case 100 * 1000:
- I2CLibPeiMmioWrite32 ( I2CBaseAddress + R_IC_SDA_HOLD, (UINT16)0x40);//100K
- *I2cMode |= V_SPEED_STANDARD;
- break;
- case 400 * 1000:
- I2CLibPeiMmioWrite32 ( I2CBaseAddress + R_IC_SDA_HOLD, (UINT16)0x32);//400K
- *I2cMode |= V_SPEED_FAST;
- break;
- default:
- I2CLibPeiMmioWrite32 ( I2CBaseAddress + R_IC_SDA_HOLD, (UINT16)0x09);//3.4M
- *I2cMode |= V_SPEED_HIGH;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Initializes the host controller to execute I2C commands.
-
- @param I2cControllerIndex Index of I2C controller in LPSS device. 0 represents I2C0, which is PCI function 1 of LPSS device.
-
- @return EFI_SUCCESS Opcode initialization on the I2C host controller completed.
- @return EFI_DEVICE_ERROR Device error, operation failed.
-**/
-EFI_STATUS
-I2CInit (
- UINT8 I2cControllerIndex,
- UINT16 SlaveAddress
- )
-{
- EFI_STATUS Status;
- UINT32 NumTries = 0;
- UINTN I2CBaseAddress;
- UINT16 I2cMode;
- UINTN PciMmBase=0;
-
-
- PciMmBase = MmPciAddress (
- 0,
- DEFAULT_PCI_BUS_NUMBER_PCH,
- PCI_DEVICE_NUMBER_PCH_LPSS_I2C,
- (I2cControllerIndex + 1),
- 0
- );
-
- I2CBaseAddress = I2CLibPeiMmioRead32 (PciMmBase+R_PCH_LPSS_I2C_BAR);
-
- //
- // Verify the parameters
- //
- if (1023 < SlaveAddress ) {
- Status = EFI_INVALID_PARAMETER;
- DEBUG((EFI_D_INFO,"I2cStartRequest Exit with Status %r\r\n", Status));
- return Status;
- }
-
- if(I2CBaseAddress == (PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE)) {
- return EFI_SUCCESS;
- }
- ProgramPciLpssI2C();
-
- I2CBaseAddress = (UINT32) (PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE);
- DEBUG ((EFI_D_ERROR, "I2CBaseAddress = 0x%x \n",I2CBaseAddress));
- NumTries = 10000; // 1 seconds
- while ((1 == ( I2CLibPeiMmioRead32 ( I2CBaseAddress + R_IC_STATUS) & STAT_MST_ACTIVITY ))) {
- MicroSecondDelay(10);
- NumTries --;
- if(0 == NumTries)
- return EFI_DEVICE_ERROR;
- }
-
- Status = I2cDisable (I2cControllerIndex);
- DEBUG((EFI_D_INFO, "I2cDisable Status = %r\r\n", Status));
-
- I2cBusFrequencySet(I2CBaseAddress, 400 * 1000, &I2cMode);//Set I2cMode
-
- I2CLibPeiMmioWrite16(I2CBaseAddress + R_IC_INTR_MASK, 0x0);
- if (0x7F < SlaveAddress) {
- SlaveAddress = (SlaveAddress & 0x3ff ) | IC_TAR_10BITADDR_MASTER;
- }
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_TAR, (UINT16) SlaveAddress );
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_RX_TL, 0);
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_TX_TL, 0 );
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_CON, I2cMode);
-
- Status = I2cEnable(I2cControllerIndex);
- DEBUG((EFI_D_INFO, "I2cEnable Status = %r\r\n", Status));
- I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_CLR_TX_ABRT );
-
- return EFI_SUCCESS;
-}
-
-/**
- Reads a Byte from I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be read
- @param Offset Offset from which the data has to be read
- @param *Byte Address to which the value read has to be stored
-
- @return EFI_SUCCESS If the byte value has been successfully read
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS ByteReadI2CBasic(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINTN ReadBytes,
- OUT UINT8 *ReadBuffer,
- IN UINT8 Start,
- IN UINT8 End
- )
-{
-
- EFI_STATUS Status;
- UINT32 I2cStatus;
- UINT16 ReceiveData;
- UINT8 *ReceiveDataEnd;
- UINT8 *ReceiveRequest;
- UINT16 RawIntrStat;
- UINTN I2CBaseAddress;
-
- I2CBaseAddress = (UINT32)(PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE);
-
- Status = EFI_SUCCESS;
-
- I2CInit(I2cControllerIndex, SlaveAddress);
-
- ReceiveDataEnd = &ReadBuffer [ReadBytes];
- if(ReadBytes) {
- ReceiveRequest = ReadBuffer;
- DEBUG((EFI_D_INFO,"Read: ---------------%d bytes to RX\r\n",ReceiveDataEnd - ReceiveRequest));
-
- while ((ReceiveDataEnd > ReceiveRequest) || (ReceiveDataEnd > ReadBuffer)) {
- //
- // Check for NACK
- //
- RawIntrStat = I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_RawIntrStat );
- if ( 0 != (RawIntrStat & I2C_INTR_TX_ABRT )) {
- I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_CLR_TX_ABRT );
- Status = RETURN_DEVICE_ERROR;
- DEBUG((EFI_D_INFO,"TX ABRT ,%d bytes hasn't been transferred\r\n",ReceiveDataEnd - ReceiveRequest));
- break;
- }
-
- //
- // Determine if another byte was received
- //
- I2cStatus = I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_STATUS );
- if ( 0 != ( I2cStatus & STAT_RFNE )) {
- ReceiveData = I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_DATA_CMD );
- *ReadBuffer++ = (UINT8)ReceiveData;
- DEBUG((EFI_D_INFO,"MmioRead32 ,1 byte 0x:%x is received\r\n",ReceiveData));
- }
-
- if(ReceiveDataEnd==ReceiveRequest) {
- //
- // Waiting the last request to get data and make (ReceiveDataEnd > ReadBuffer) =TRUE.
- //
- continue;
- }
-
- //
- // Wait until a read request will fit
- //
- if ( 0 == ( I2cStatus & STAT_TFNF )) {
- MicroSecondDelay ( 10 );
- continue;
- }
-
- //
- // Issue the next read request
- //
- if(End && Start ) {
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD|B_CMD_RESTART|B_CMD_STOP);
- } else if (!End && Start ) {
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD|B_CMD_RESTART);
- } else if (End && !Start ) {
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD|B_CMD_STOP);
- } else if (!End && !Start ) {
- I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD);
- }
- ReceiveRequest += 1;
- }
-
- }
- return Status;
-
-}
-
-/**
- Writes a Byte to I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be written
- @param Offset Offset from which the data has to be read
- @param *Byte Address to which the value written is stored
-
- @return EFI_SUCCESS IF the byte value has been successfully written
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS
-ByteWriteI2CBasic(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINTN WriteBytes,
- IN UINT8 *WriteBuffer,
- IN UINT8 Start,
- IN UINT8 End
- )
-{
-
- EFI_STATUS Status;
- UINT32 I2cStatus;
- UINT8 *TransmitEnd;
- UINT16 RawIntrStat;
- UINTN I2CBaseAddress;
-
- I2CBaseAddress = (UINT32)PEI_TEPM_LPSS_I2C0_BAR+ I2cControllerIndex * PCI_CONFIG_SPACE_SIZE;
-
- Status = EFI_SUCCESS;
-
- I2CInit(I2cControllerIndex, SlaveAddress);
-
- TransmitEnd = &WriteBuffer [WriteBytes];
- if( WriteBytes ) {
-
- DEBUG((EFI_D_INFO,"Write: --------------%d bytes to TX\r\n", TransmitEnd - WriteBuffer));
-
- while ( TransmitEnd > WriteBuffer) {
- I2cStatus = I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_STATUS);
- RawIntrStat = I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_RawIntrStat);
- if ( 0 != (RawIntrStat & I2C_INTR_TX_ABRT)) {
- I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_CLR_TX_ABRT);
- Status = RETURN_DEVICE_ERROR;
- DEBUG((EFI_D_ERROR,"TX ABRT TransmitEnd:0x%x WriteBuffer:0x%x\r\n", TransmitEnd, WriteBuffer));
- break;
- }
- if (0 == ( I2cStatus & STAT_TFNF)) {
- continue;
- }
- if(End && Start) {
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++) | B_CMD_RESTART | B_CMD_STOP);
- } else if (!End && Start ) {
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++) | B_CMD_RESTART);
- } else if (End && !Start ) {
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++) | B_CMD_STOP);
- } else if (!End && !Start ) {
- I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++));
- }
-
- // Add a small delay to work around some odd behavior being seen. Without this delay bytes get dropped.
- MicroSecondDelay ( FIFO_WRITE_DELAY );
- }
-
- }
-
- if(EFI_ERROR(Status)) {
- DEBUG((EFI_D_INFO,"I2cStartRequest Exit with Status %r\r\n",Status));
- }
-
- return Status;
-}
-
-/**
- Reads a Byte from I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be read
- @param Offset Offset from which the data has to be read
- @param ReadBytes Number of bytes to be read
- @param *ReadBuffer Address to which the value read has to be stored
-
- @return EFI_SUCCESS IF the byte value has been successfully read
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS
-ByteReadI2C(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINT8 Offset,
- IN UINTN ReadBytes,
- OUT UINT8 *ReadBuffer
- )
-{
- EFI_STATUS Status;
-
- DEBUG ((EFI_D_ERROR, "ByteReadI2C:---offset:0x%x\n",Offset));
- Status = ByteWriteI2CBasic(I2cControllerIndex, SlaveAddress, 1, &Offset,TRUE,FALSE);
- Status = ByteReadI2CBasic(I2cControllerIndex, SlaveAddress, ReadBytes, ReadBuffer, TRUE, TRUE);
-
- return Status;
-}
-
-/**
- Writes a Byte to I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be written
- @param Offset Offset from which the data has to be written
- @param WriteBytes Number of bytes to be written
- @param *Byte Address to which the value written is stored
-
- @return EFI_SUCCESS IF the byte value has been successfully read
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS ByteWriteI2C(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINT8 Offset,
- IN UINTN WriteBytes,
- IN UINT8 *WriteBuffer
- )
-{
- EFI_STATUS Status;
-
- DEBUG ((EFI_D_ERROR, "ByteWriteI2C:---offset/bytes/buf:0x%x,0x%x,0x%x,0x%x\n",Offset,WriteBytes,WriteBuffer,*WriteBuffer));
- Status = ByteWriteI2CBasic(I2cControllerIndex, SlaveAddress, 1, &Offset, TRUE, FALSE);
- Status = ByteWriteI2CBasic(I2cControllerIndex, SlaveAddress, WriteBytes, WriteBuffer, FALSE, TRUE);
-
- return Status;
-}
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.h b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.h deleted file mode 100644 index 47536ae..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.h +++ /dev/null @@ -1,280 +0,0 @@ -/** @file
- I2C PEI Lib Instance.
-
- Copyright (c) 1999- 2015, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef I2C_PEI_REGS_H
-#define I2C_PEI_REGS_H
-
-#include "PiPei.h"
-
-#define R_PCH_LPC_PMC_BASE 0x44
-#define B_PCH_LPC_PMC_BASE_BAR 0xFFFFFE00
-#define R_PCH_PMC_FUNC_DIS 0x34 // Function Disable Register
-#define PCIEX_BASE_ADDRESS 0xE0000000
-#define PciD31F0RegBase PCIEX_BASE_ADDRESS + (UINT32) (31 << 15)
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC7 BIT7 // LPSS SPI Disable
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC6 BIT6 // LPSS HSUART #2 Disable
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC5 BIT5 // LPSS HSUART #1 Disable
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC4 BIT4 // LPSS I2S Disable
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC3 BIT3 // LPSS PCM Disable
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC2 BIT2 // LPSS I2C #2 Disable
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC1 BIT1 // LPSS I2C #1 Disable
-#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC0 BIT0 // LPSS DMA Disable
-
-
-#define DEFAULT_PCI_BUS_NUMBER_PCH 0
-
-#define R_PCH_LPSS_I2C_STSCMD 0x04 // Status & Command
-#define B_PCH_LPSS_I2C_STSCMD_RMA BIT29 // RMA
-#define B_PCH_LPSS_I2C_STSCMD_RCA BIT28 // RCA
-#define B_PCH_LPSS_I2C_STSCMD_CAPLIST BIT20 // Capability List
-#define B_PCH_LPSS_I2C_STSCMD_INTRSTS BIT19 // Interrupt Status
-#define B_PCH_LPSS_I2C_STSCMD_INTRDIS BIT10 // Interrupt Disable
-#define B_PCH_LPSS_I2C_STSCMD_SERREN BIT8 // SERR# Enable
-#define B_PCH_LPSS_I2C_STSCMD_BME BIT2 // Bus Master Enable
-#define B_PCH_LPSS_I2C_STSCMD_MSE BIT1 // Memory Space Enable
-
-#define R_PCH_LPSS_I2C_BAR 0x10 // BAR
-#define B_PCH_LPSS_I2C_BAR_BA 0xFFFFF000 // Base Address
-#define B_PCH_LPSS_I2C_BAR_SI 0x00000FF0 // Size Indicator
-#define B_PCH_LPSS_I2C_BAR_PF BIT3 // Prefetchable
-#define B_PCH_LPSS_I2C_BAR_TYPE (BIT2 | BIT1) // Type
-#define B_PCH_LPSS_I2C_BAR_MS BIT0 // Message Space
-
-#define R_PCH_LPSS_I2C_BAR1 0x14 // BAR 1
-#define B_PCH_LPSS_I2C_BAR1_BA 0xFFFFF000 // Base Address
-#define B_PCH_LPSS_I2C_BAR1_SI 0x00000FF0 // Size Indicator
-#define B_PCH_LPSS_I2C_BAR1_PF BIT3 // Prefetchable
-#define B_PCH_LPSS_I2C_BAR1_TYPE (BIT2 | BIT1) // Type
-#define B_PCH_LPSS_I2C_BAR1_MS BIT0 // Message Space
-
-#define NUM_RETRIES 0xFFFF
-
-//
-// LPIO I2C Module Memory Space Registers
-//
-#define R_PCH_LPIO_I2C_MEM_RESETS 0x804 // Software Reset
-#define B_PCH_LPIO_I2C_MEM_RESETS_FUNC BIT1 // Function Clock Domain Reset
-#define B_PCH_LPIO_I2C_MEM_RESETS_APB BIT0 // APB Domain Reset
-
-#define R_PCH_LPSS_I2C_MEM_PCP 0x800 // Private Clock Parameters
-
-#define bit(a) 1 << (a)
-
-//
-// MMIO Register Definitions
-//
-
-#define I2C0_REG_SPACE_ADDR_BASE 0xFF138000 //01K
-
-#define R_IC_CON ( 0x00) // I2C Control
-#define B_IC_RESTART_EN BIT5
-#define B_IC_SLAVE_DISABLE BIT6
-#define V_SPEED_STANDARD 0x02
-#define V_SPEED_FAST 0x04
-#define V_SPEED_HIGH 0x06
-#define B_MASTER_MODE BIT0
-
-#define R_IC_TAR ( 0x04) // I2C Target Address
-#define IC_TAR_10BITADDR_MASTER BIT12
-
-#define R_IC_SAR ( 0x08) // I2C Slave Address
-#define R_IC_HS_MADDR ( 0x0C) // I2C HS MasterMode Code Address
-#define R_IC_DATA_CMD ( 0x10) // I2C Rx/Tx Data Buffer and Command
-
-#define B_READ_CMD BIT8 // 1 = read, 0 = write
-#define B_CMD_STOP BIT9 // 1 = STOP
-#define B_CMD_RESTART BIT10 // 1 = IC_RESTART_EN
-
-#define V_WRITE_CMD_MASK ( 0xFF)
-
-#define R_IC_SS_SCL_HCNT ( 0x14) // Standard Speed I2C Clock SCL High Count
-#define R_IC_SS_SCL_LCNT ( 0x18) // Standard Speed I2C Clock SCL Low Count
-#define R_IC_FS_SCL_HCNT ( 0x1C) // Full Speed I2C Clock SCL High Count
-#define R_IC_FS_SCL_LCNT ( 0x20) // Full Speed I2C Clock SCL Low Count
-#define R_IC_HS_SCL_HCNT ( 0x24) // High Speed I2C Clock SCL High Count
-#define R_IC_HS_SCL_LCNT ( 0x28) // High Speed I2C Clock SCL Low Count
-#define R_IC_INTR_STAT ( 0x2C) // I2C Inetrrupt Status
-#define R_IC_INTR_MASK ( 0x30) // I2C Interrupt Mask
-#define I2C_INTR_GEN_CALL BIT11 // General call received
-#define I2C_INTR_START_DET BIT10
-#define I2C_INTR_STOP_DET BIT9
-#define I2C_INTR_ACTIVITY BIT8
-#define I2C_INTR_TX_ABRT BIT6 // Set on NACK
-#define I2C_INTR_TX_EMPTY BIT4
-#define I2C_INTR_TX_OVER BIT3
-#define I2C_INTR_RX_FULL BIT2 // Data bytes in RX FIFO over threshold
-#define I2C_INTR_RX_OVER BIT1
-#define I2C_INTR_RX_UNDER BIT0
-#define R_IC_RawIntrStat ( 0x34) // I2C Raw Interrupt Status
-#define R_IC_RX_TL ( 0x38) // I2C Receive FIFO Threshold
-#define R_IC_TX_TL ( 0x3C) // I2C Transmit FIFO Threshold
-#define R_IC_CLR_INTR ( 0x40) // Clear Combined and Individual Interrupts
-#define R_IC_CLR_RX_UNDER ( 0x44) // Clear RX_UNDER Interrupt
-#define R_IC_CLR_RX_OVER ( 0x48) // Clear RX_OVERinterrupt
-#define R_IC_CLR_TX_OVER ( 0x4C) // Clear TX_OVER interrupt
-#define R_IC_CLR_RD_REQ ( 0x50) // Clear RD_REQ interrupt
-#define R_IC_CLR_TX_ABRT ( 0x54) // Clear TX_ABRT interrupt
-#define R_IC_CLR_RX_DONE ( 0x58) // Clear RX_DONE interrupt
-#define R_IC_CLR_ACTIVITY ( 0x5C) // Clear ACTIVITY interrupt
-#define R_IC_CLR_STOP_DET ( 0x60) // Clear STOP_DET interrupt
-#define R_IC_CLR_START_DET ( 0x64) // Clear START_DET interrupt
-#define R_IC_CLR_GEN_CALL ( 0x68) // Clear GEN_CALL interrupt
-#define R_IC_ENABLE ( 0x6C) // I2C Enable
-#define R_IC_STATUS ( 0x70) // I2C Status
-
-#define R_IC_SDA_HOLD ( 0x7C) // I2C IC_DEFAULT_SDA_HOLD//16bits
-
-#define STAT_MST_ACTIVITY BIT5 // Master FSM Activity Status.
-#define STAT_RFF BIT4 // RX FIFO is completely full
-#define STAT_RFNE BIT3 // RX FIFO is not empty
-#define STAT_TFE BIT2 // TX FIFO is completely empty
-#define STAT_TFNF BIT1 // TX FIFO is not full
-
-#define R_IC_TXFLR ( 0x74) // Transmit FIFO Level Register
-#define R_IC_RXFLR ( 0x78) // Receive FIFO Level Register
-#define R_IC_TX_ABRT_SOURCE ( 0x80) // I2C Transmit Abort Status Register
-#define R_IC_SLV_DATA_NACK_ONLY ( 0x84) // Generate SLV_DATA_NACK Register
-#define R_IC_DMA_CR ( 0x88) // DMA Control Register
-#define R_IC_DMA_TDLR ( 0x8C) // DMA Transmit Data Level
-#define R_IC_DMA_RDLR ( 0x90) // DMA Receive Data Level
-#define R_IC_SDA_SETUP ( 0x94) // I2C SDA Setup Register
-#define R_IC_ACK_GENERAL_CALL ( 0x98) // I2C ACK General Call Register
-#define R_IC_ENABLE_STATUS ( 0x9C) // I2C Enable Status Register
-#define R_IC_COMP_PARAM ( 0xF4) // Component Parameter Register
-#define R_IC_COMP_VERSION ( 0xF8) // Component Version ID
-#define R_IC_COMP_TYPE ( 0xFC) // Component Type
-
-#define I2C_SS_SCL_HCNT_VALUE_100M 0x1DD
-#define I2C_SS_SCL_LCNT_VALUE_100M 0x1E4
-#define I2C_FS_SCL_HCNT_VALUE_100M 0x54
-#define I2C_FS_SCL_LCNT_VALUE_100M 0x9a
-#define I2C_HS_SCL_HCNT_VALUE_100M 0x7
-#define I2C_HS_SCL_LCNT_VALUE_100M 0xE
-
-//
-// FIFO write workaround value.
-//
-#define FIFO_WRITE_DELAY 2
-#define IC_TAR_10BITADDR_MASTER BIT12
-#define FIFO_SIZE 32
-#define R_IC_INTR_STAT ( 0x2C) // I2c Inetrrupt Status
-#define R_IC_INTR_MASK ( 0x30) // I2c Interrupt Mask
-#define I2C_INTR_GEN_CALL BIT11 // General call received
-#define I2C_INTR_START_DET BIT10
-#define I2C_INTR_STOP_DET BIT9
-#define I2C_INTR_ACTIVITY BIT8
-#define I2C_INTR_TX_ABRT BIT6 // Set on NACK
-#define I2C_INTR_TX_EMPTY BIT4
-#define I2C_INTR_TX_OVER BIT3
-#define I2C_INTR_RX_FULL BIT2 // Data bytes in RX FIFO over threshold
-#define I2C_INTR_RX_OVER BIT1
-#define I2C_INTR_RX_UNDER BIT0
-
-/**
- Programe all I2C controllers on LPSS.
-
- I2C0 is function 1 of LPSS. I2C1 is function 2 of LPSS, etc..
-
- @param VOID
-
- @return EFI_SUCCESS
-**/
-EFI_STATUS
-ProgramPciLpssI2C (
- VOID
- );
-
-/**
- Reads a Byte from I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be read
- @param Offset Offset from which the data has to be read
- @param *Byte Address to which the value read has to be stored
- @param Start Whether a RESTART is issued before the byte is sent or received
- @param End Whether STOP is generated after a data byte is sent or received
-
- @return EFI_SUCCESS If the byte value has been successfully read
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS
-ByteReadI2CBasic(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINTN ReadBytes,
- OUT UINT8 *ReadBuffer,
- IN UINT8 Start,
- IN UINT8 End
- );
-
-/**
- Writes a Byte to I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be written
- @param Offset Offset from which the data has to be read
- @param *Byte Address to which the value written is stored
- @param Start Whether a RESTART is issued before the byte is sent or received
- @param End Whether STOP is generated after a data byte is sent or received
-
- @return EFI_SUCCESS IF the byte value has been successfully written
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS
-ByteWriteI2CBasic(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINTN WriteBytes,
- IN UINT8 *WriteBuffer,
- IN UINT8 Start,
- IN UINT8 End
- );
-
-/**
- Reads a Byte from I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be read
- @param Offset Offset from which the data has to be read
- @param ReadBytes Number of bytes to be read
- @param *ReadBuffer Address to which the value read has to be stored
-
- @return EFI_SUCCESS IF the byte value has been successfully read
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS
-ByteReadI2C(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINT8 Offset,
- IN UINTN ReadBytes,
- OUT UINT8 *ReadBuffer
- );
-
-/**
- Writes a Byte to I2C Device.
-
- @param I2cControllerIndex I2C Bus no to which the I2C device has been connected
- @param SlaveAddress Device Address from which the byte value has to be written
- @param Offset Offset from which the data has to be written
- @param WriteBytes Number of bytes to be written
- @param *Byte Address to which the value written is stored
-
- @return EFI_SUCCESS IF the byte value has been successfully read
- @return EFI_DEVICE_ERROR Operation Failed, Device Error
-**/
-EFI_STATUS
-ByteWriteI2C(
- IN UINT8 I2cControllerIndex,
- IN UINT8 SlaveAddress,
- IN UINT8 Offset,
- IN UINTN WriteBytes,
- IN UINT8 *WriteBuffer
- );
-
-#endif
diff --git a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.inf b/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.inf deleted file mode 100644 index a78212a..0000000 --- a/Vlv2TbltDevicePkg/Library/I2CLibPei/I2CLibPei.inf +++ /dev/null @@ -1,40 +0,0 @@ -## @file
-# Instance of I2C Library.
-#
-# Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = I2CLibPei
- FILE_GUID = 8EF61509-890B-4FF2-B352-1C0E9CDDEC8B
- MODULE_TYPE = PEIM
- VERSION_STRING = 1.0
- LIBRARY_CLASS = LockBoxLib|PEIM
- CONSTRUCTOR = IntelI2CPeiLibConstructor
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 EBC
-#
-
-[Sources.common]
- I2CLibPei.c
- I2CIoLibPei.c
-
-[LibraryClasses]
- TimerLib
-
-[PPIs]
- gEfiPeiStallPpiGuid
-
-
-[Packages]
- MdePkg/MdePkg.dec
- Vlv2DeviceRefCodePkg/Vlv2DeviceRefCodePkg.dec
-
-
|