diff options
Diffstat (limited to 'UnixPkg/UnixSerialIoDxe/UnixSerialIo.c')
-rw-r--r-- | UnixPkg/UnixSerialIoDxe/UnixSerialIo.c | 1487 |
1 files changed, 1487 insertions, 0 deletions
diff --git a/UnixPkg/UnixSerialIoDxe/UnixSerialIo.c b/UnixPkg/UnixSerialIoDxe/UnixSerialIo.c new file mode 100644 index 0000000..9f550f2 --- /dev/null +++ b/UnixPkg/UnixSerialIoDxe/UnixSerialIo.c @@ -0,0 +1,1487 @@ +/*++
+
+Copyright (c) 2006 - 2007, Intel Corporation
+All rights reserved. This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+Module Name:
+
+ UnixSerialIo.c
+
+Abstract:
+
+ Our DriverBinding member functions operate on the handles
+ created by the NT Bus driver.
+
+ Handle(1) - UnixIo - DevicePath(1)
+
+ If a serial port is added to the system this driver creates a new handle.
+ The new handle is required, since the serial device must add an UART device
+ pathnode.
+
+ Handle(2) - SerialIo - DevicePath(1)\UART
+
+ The driver then adds a gEfiUnixSerialPortGuid as a protocol to Handle(1).
+ The instance data for this protocol is the private data used to create
+ Handle(2).
+
+ Handle(1) - UnixIo - DevicePath(1) - UnixSerialPort
+
+ If the driver is unloaded Handle(2) is removed from the system and
+ gEfiUnixSerialPortGuid is removed from Handle(1).
+
+ Note: Handle(1) is any handle created by the Win NT Bus driver that is passed
+ into the DriverBinding member functions of this driver. This driver requires
+ a Handle(1) to contain a UnixIo protocol, a DevicePath protocol, and
+ the TypeGuid in the UnixIo must be gEfiUnixSerialPortGuid.
+
+ If Handle(1) contains a gEfiUnixSerialPortGuid protocol then the driver is
+ loaded on the device.
+
+--*/
+
+#include "UnixSerialIo.h"
+#include <termio.h>
+
+EFI_DRIVER_BINDING_PROTOCOL gUnixSerialIoDriverBinding = {
+ UnixSerialIoDriverBindingSupported,
+ UnixSerialIoDriverBindingStart,
+ UnixSerialIoDriverBindingStop,
+ 0xa,
+ NULL,
+ NULL
+};
+
+STATIC
+UINTN
+ConvertBaud2Unix (
+ UINT64 BaudRate
+ )
+{
+ switch (BaudRate) {
+ case 0:
+ return B0;
+ case 50:
+ return B50;
+ case 75:
+ return B75;
+ case 110:
+ return B110;
+ case 134:
+ return B134;
+ case 150:
+ return B150;
+ case 200:
+ return B200;
+ case 300:
+ return B300;
+ case 600:
+ return B600;
+ case 1200:
+ return B1200;
+ case 1800:
+ return B1800;
+ case 2400:
+ return B2400;
+ case 4800:
+ return B4800;
+ case 9600:
+ return B9600;
+ case 19200:
+ return B19200;
+ case 38400:
+ return B38400;
+ case 57600:
+ return B57600;
+ case 115200:
+ return B115200;
+ case 230400:
+ return B230400;
+ case 460800:
+ return B460800;
+ case 500000:
+ return B500000;
+ case 576000:
+ return B576000;
+ case 921600:
+ return B921600;
+ case 1000000:
+ return B1000000;
+ case 1152000:
+ return B1152000;
+ case 1500000:
+ return B1500000;
+ case 2000000:
+ return B2000000;
+ case 2500000:
+ return B2500000;
+ case 3000000:
+ return B3000000;
+ case 3500000:
+ return B3500000;
+ case 4000000:
+ return B4000000;
+ case __MAX_BAUD:
+ default:
+ DEBUG ((EFI_D_ERROR, "Invalid Baud Rate Parameter!\r\n"));
+ }
+ return -1;
+}
+
+STATIC
+UINTN
+ConvertByteSize2Unix (
+ UINT8 DataBit
+ )
+{
+ switch (DataBit) {
+ case 5:
+ return CS5;
+ case 6:
+ return CS6;
+ case 7:
+ return CS7;
+ case 8:
+ return CS8;
+ default:
+ DEBUG ((EFI_D_ERROR, "Invalid Data Size Parameter!\r\n"));
+ }
+ return -1;
+}
+
+STATIC
+VOID
+ConvertParity2Unix (
+ struct termios *Options,
+ EFI_PARITY_TYPE Parity
+ )
+{
+ switch (Parity) {
+ case NoParity:
+ Options->c_cflag &= ~PARENB;
+ break;
+ case EvenParity:
+ Options->c_cflag |= PARENB;
+ break;
+ case OddParity:
+ Options->c_cflag |= PARENB;
+ Options->c_cflag |= PARODD;
+ break;
+ case MarkParity:
+ Options->c_cflag = PARENB | CMSPAR | PARODD;
+ break;
+ case SpaceParity:
+ Options->c_cflag |= PARENB | CMSPAR;
+ Options->c_cflag &= ~PARODD;
+ break;
+ default:
+ DEBUG ((EFI_D_ERROR, "Invalid Parity Parameter!\r\n"));
+ }
+}
+
+STATIC
+VOID
+ConvertStopBit2Unix (
+ struct termios *Options,
+ EFI_STOP_BITS_TYPE StopBits
+ )
+{
+ switch (StopBits) {
+ case TwoStopBits:
+ Options->c_cflag |= CSTOPB;
+ break;
+ case OneStopBit:
+ case OneFiveStopBits:
+ case DefaultStopBits:
+ Options->c_cflag &= ~CSTOPB;
+ }
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoDriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Handle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+/*++
+
+Routine Description:
+ The implementation of EFI_DRIVER_BINDING_PROTOCOL.EFI_DRIVER_BINDING_SUPPORTED.
+
+Arguments:
+
+Returns:
+
+ None
+
+--*/
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ EFI_UNIX_IO_PROTOCOL *UnixIo;
+ UART_DEVICE_PATH *UartNode;
+
+ //
+ // Open the IO Abstraction(s) needed to perform the supported test
+ //
+ Status = gBS->OpenProtocol (
+ Handle,
+ &gEfiDevicePathProtocolGuid,
+ (VOID**)&ParentDevicePath,
+ This->DriverBindingHandle,
+ Handle,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (Status == EFI_ALREADY_STARTED) {
+ return EFI_SUCCESS;
+ }
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ gBS->CloseProtocol (
+ Handle,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Handle
+ );
+
+ Status = gBS->OpenProtocol (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ (VOID**)&UnixIo,
+ This->DriverBindingHandle,
+ Handle,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (Status == EFI_ALREADY_STARTED) {
+ return EFI_SUCCESS;
+ }
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Make sure that the Unix Thunk Protocol is valid
+ //
+ if (UnixIo->UnixThunk->Signature != EFI_UNIX_THUNK_PROTOCOL_SIGNATURE) {
+ Status = EFI_UNSUPPORTED;
+ goto Error;
+ }
+
+ //
+ // Check the GUID to see if this is a handle type the driver supports
+ //
+ if (!CompareGuid (UnixIo->TypeGuid, &gEfiUnixSerialPortGuid)) {
+ Status = EFI_UNSUPPORTED;
+ goto Error;
+ }
+
+ if (RemainingDevicePath != NULL) {
+ Status = EFI_UNSUPPORTED;
+ UartNode = (UART_DEVICE_PATH *) RemainingDevicePath;
+ if (UartNode->Header.Type != MESSAGING_DEVICE_PATH ||
+ UartNode->Header.SubType != MSG_UART_DP ||
+ DevicePathNodeLength((EFI_DEVICE_PATH_PROTOCOL *)UartNode) != sizeof(UART_DEVICE_PATH)) {
+ goto Error;
+ }
+ if (UartNode->BaudRate < 0 || UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {
+ goto Error;
+ }
+ if (UartNode->Parity < NoParity || UartNode->Parity > SpaceParity) {
+ goto Error;
+ }
+ if (UartNode->DataBits < 5 || UartNode->DataBits > 8) {
+ goto Error;
+ }
+ if (UartNode->StopBits < OneStopBit || UartNode->StopBits > TwoStopBits) {
+ goto Error;
+ }
+ if ((UartNode->DataBits == 5) && (UartNode->StopBits == TwoStopBits)) {
+ goto Error;
+ }
+ if ((UartNode->DataBits >= 6) && (UartNode->DataBits <= 8) && (UartNode->StopBits == OneFiveStopBits)) {
+ goto Error;
+ }
+ Status = EFI_SUCCESS;
+ }
+
+Error:
+ //
+ // Close the I/O Abstraction(s) used to perform the supported test
+ //
+ gBS->CloseProtocol (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ This->DriverBindingHandle,
+ Handle
+ );
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoDriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Handle,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+/*++
+
+Routine Description:
+
+Arguments:
+
+Returns:
+
+ None
+
+--*/
+{
+ EFI_STATUS Status;
+ EFI_UNIX_IO_PROTOCOL *UnixIo;
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ UINTN UnixHandle;
+ UART_DEVICE_PATH Node;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
+ UINTN EntryCount;
+ UINTN Index;
+ EFI_SERIAL_IO_PROTOCOL *SerialIo;
+ CHAR8 AsciiDevName[1024];
+
+ DEBUG ((EFI_D_INFO, "SerialIo drive binding start!\r\n"));
+ Private = NULL;
+ UnixHandle = -1;
+
+ //
+ // Grab the protocols we need
+ //
+ Status = gBS->OpenProtocol (
+ Handle,
+ &gEfiDevicePathProtocolGuid,
+ (VOID**)&ParentDevicePath,
+ This->DriverBindingHandle,
+ Handle,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
+ return Status;
+ }
+
+ //
+ // Grab the IO abstraction we need to get any work done
+ //
+ Status = gBS->OpenProtocol (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ (VOID**)&UnixIo,
+ This->DriverBindingHandle,
+ Handle,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
+ gBS->CloseProtocol (
+ Handle,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Handle
+ );
+ return Status;
+ }
+
+ if (Status == EFI_ALREADY_STARTED) {
+
+ if (RemainingDevicePath == NULL) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Make sure a child handle does not already exist. This driver can only
+ // produce one child per serial port.
+ //
+ Status = gBS->OpenProtocolInformation (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ &OpenInfoBuffer,
+ &EntryCount
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = EFI_ALREADY_STARTED;
+ for (Index = 0; Index < EntryCount; Index++) {
+ if (OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) {
+ Status = gBS->OpenProtocol (
+ OpenInfoBuffer[Index].ControllerHandle,
+ &gEfiSerialIoProtocolGuid,
+ (VOID**)&SerialIo,
+ This->DriverBindingHandle,
+ Handle,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (!EFI_ERROR (Status)) {
+ CopyMem (&Node, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
+ Status = SerialIo->SetAttributes (
+ SerialIo,
+ Node.BaudRate,
+ SerialIo->Mode->ReceiveFifoDepth,
+ SerialIo->Mode->Timeout,
+ Node.Parity,
+ Node.DataBits,
+ Node.StopBits
+ );
+ }
+ break;
+ }
+ }
+
+ FreePool (OpenInfoBuffer);
+ return Status;
+ }
+
+ //
+ // Check to see if we can access the hardware device. If it's Open in Unix we
+ // will not get access.
+ //
+ UnicodeStrToAsciiStr(UnixIo->EnvString, AsciiDevName);
+ UnixHandle = UnixIo->UnixThunk->Open (AsciiDevName, O_RDWR | O_NOCTTY, 0);
+
+ if (UnixHandle == -1) {
+ DEBUG ((EFI_D_INFO, "Faile to open serial device, %s!\r\n", UnixIo->EnvString ));
+ UnixIo->UnixThunk->Perror (AsciiDevName);
+ Status = EFI_DEVICE_ERROR;
+ goto Error;
+ }
+ DEBUG ((EFI_D_INFO, "Success to open serial device %s, Hanle = 0x%x \r\n", UnixIo->EnvString, UnixHandle));
+
+ //
+ // Construct Private data
+ //
+ Private = AllocatePool (sizeof (UNIX_SERIAL_IO_PRIVATE_DATA));
+ if (Private == NULL) {
+ goto Error;
+ }
+
+ //
+ // This signature must be valid before any member function is called
+ //
+ Private->Signature = UNIX_SERIAL_IO_PRIVATE_DATA_SIGNATURE;
+ Private->UnixHandle = UnixHandle;
+ Private->ControllerHandle = Handle;
+ Private->Handle = NULL;
+ Private->UnixThunk = UnixIo->UnixThunk;
+ Private->ParentDevicePath = ParentDevicePath;
+ Private->ControllerNameTable = NULL;
+
+ Private->SoftwareLoopbackEnable = FALSE;
+ Private->HardwareLoopbackEnable = FALSE;
+ Private->HardwareFlowControl = FALSE;
+ Private->Fifo.First = 0;
+ Private->Fifo.Last = 0;
+ Private->Fifo.Surplus = SERIAL_MAX_BUFFER_SIZE;
+
+ AddUnicodeString (
+ "eng",
+ gUnixSerialIoComponentName.SupportedLanguages,
+ &Private->ControllerNameTable,
+ UnixIo->EnvString
+ );
+
+ Private->SerialIo.Revision = SERIAL_IO_INTERFACE_REVISION;
+ Private->SerialIo.Reset = UnixSerialIoReset;
+ Private->SerialIo.SetAttributes = UnixSerialIoSetAttributes;
+ Private->SerialIo.SetControl = UnixSerialIoSetControl;
+ Private->SerialIo.GetControl = UnixSerialIoGetControl;
+ Private->SerialIo.Write = UnixSerialIoWrite;
+ Private->SerialIo.Read = UnixSerialIoRead;
+ Private->SerialIo.Mode = &Private->SerialIoMode;
+
+ if (RemainingDevicePath != NULL) {
+ //
+ // Match the configuration of the RemainingDevicePath. IsHandleSupported()
+ // already checked to make sure the RemainingDevicePath contains settings
+ // that we can support.
+ //
+ CopyMem (&Private->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
+ } else {
+ //
+ // Build the device path by appending the UART node to the ParentDevicePath
+ // from the UnixIo handle. The Uart setings are zero here, since
+ // SetAttribute() will update them to match the default setings.
+ //
+ ZeroMem (&Private->UartDevicePath, sizeof (UART_DEVICE_PATH));
+ Private->UartDevicePath.Header.Type = MESSAGING_DEVICE_PATH;
+ Private->UartDevicePath.Header.SubType = MSG_UART_DP;
+ SetDevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath, sizeof (UART_DEVICE_PATH));
+ }
+
+ //
+ // Build the device path by appending the UART node to the ParentDevicePath
+ // from the UnixIo handle. The Uart setings are zero here, since
+ // SetAttribute() will update them to match the current setings.
+ //
+ Private->DevicePath = AppendDevicePathNode (
+ ParentDevicePath,
+ (EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath
+ );
+ if (Private->DevicePath == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error;
+ }
+
+ //
+ // Fill in Serial I/O Mode structure based on either the RemainingDevicePath or defaults.
+ //
+ Private->SerialIoMode.ControlMask = SERIAL_CONTROL_MASK;
+ Private->SerialIoMode.Timeout = SERIAL_TIMEOUT_DEFAULT;
+ Private->SerialIoMode.BaudRate = Private->UartDevicePath.BaudRate;
+ Private->SerialIoMode.ReceiveFifoDepth = SERIAL_FIFO_DEFAULT;
+ Private->SerialIoMode.DataBits = Private->UartDevicePath.DataBits;
+ Private->SerialIoMode.Parity = Private->UartDevicePath.Parity;
+ Private->SerialIoMode.StopBits = Private->UartDevicePath.StopBits;
+
+ //
+ // Issue a reset to initialize the COM port
+ //
+ Status = Private->SerialIo.Reset (&Private->SerialIo);
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ //
+ // Create new child handle
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Private->Handle,
+ &gEfiSerialIoProtocolGuid,
+ &Private->SerialIo,
+ &gEfiDevicePathProtocolGuid,
+ Private->DevicePath,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ //
+ // Open For Child Device
+ //
+ Status = gBS->OpenProtocol (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ (VOID**)&UnixIo,
+ This->DriverBindingHandle,
+ Private->Handle,
+ EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
+ );
+ if (EFI_ERROR (Status)) {
+ goto Error;
+ }
+
+ return EFI_SUCCESS;
+
+Error:
+ //
+ // Use the Stop() function to free all resources allocated in Start()
+ //
+ if (Private != NULL) {
+ if (Private->Handle != NULL) {
+ This->Stop (This, Handle, 1, &Private->Handle);
+ } else {
+ if (UnixHandle != -1) {
+ Private->UnixThunk->Close (UnixHandle);
+ }
+
+ if (Private->DevicePath != NULL) {
+ FreePool (Private->DevicePath);
+ }
+
+ FreeUnicodeStringTable (Private->ControllerNameTable);
+
+ FreePool (Private);
+ }
+ }
+
+ This->Stop (This, Handle, 0, NULL);
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoDriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Handle,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ Handle - TODO: add argument description
+ NumberOfChildren - TODO: add argument description
+ ChildHandleBuffer - TODO: add argument description
+
+Returns:
+
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+ EFI_SUCCESS - TODO: Add description for return value
+
+--*/
+{
+ EFI_STATUS Status;
+ UINTN Index;
+ BOOLEAN AllChildrenStopped;
+ EFI_SERIAL_IO_PROTOCOL *SerialIo;
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ EFI_UNIX_IO_PROTOCOL *UnixIo;
+
+ //
+ // Complete all outstanding transactions to Controller.
+ // Don't allow any new transaction to Controller to be started.
+ //
+
+ if (NumberOfChildren == 0) {
+ //
+ // Close the bus driver
+ //
+ Status = gBS->CloseProtocol (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ This->DriverBindingHandle,
+ Handle
+ );
+ Status = gBS->CloseProtocol (
+ Handle,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Handle
+ );
+ return Status;
+ }
+
+ AllChildrenStopped = TRUE;
+
+ for (Index = 0; Index < NumberOfChildren; Index++) {
+ Status = gBS->OpenProtocol (
+ ChildHandleBuffer[Index],
+ &gEfiSerialIoProtocolGuid,
+ (VOID**)&SerialIo,
+ This->DriverBindingHandle,
+ Handle,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (!EFI_ERROR (Status)) {
+ Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (SerialIo);
+
+ ASSERT (Private->Handle == ChildHandleBuffer[Index]);
+
+ Status = gBS->CloseProtocol (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ This->DriverBindingHandle,
+ ChildHandleBuffer[Index]
+ );
+
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ ChildHandleBuffer[Index],
+ &gEfiSerialIoProtocolGuid,
+ &Private->SerialIo,
+ &gEfiDevicePathProtocolGuid,
+ Private->DevicePath,
+ NULL
+ );
+
+ if (EFI_ERROR (Status)) {
+ gBS->OpenProtocol (
+ Handle,
+ &gEfiUnixIoProtocolGuid,
+ (VOID **) &UnixIo,
+ This->DriverBindingHandle,
+ ChildHandleBuffer[Index],
+ EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
+ );
+ } else {
+ Private->UnixThunk->Close (Private->UnixHandle);
+
+ FreePool (Private->DevicePath);
+
+ FreeUnicodeStringTable (Private->ControllerNameTable);
+
+ FreePool (Private);
+ }
+ }
+
+ if (EFI_ERROR (Status)) {
+ AllChildrenStopped = FALSE;
+ }
+ }
+
+ if (!AllChildrenStopped) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+
+//
+// Serial IO Protocol member functions
+//
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoReset (
+ IN EFI_SERIAL_IO_PROTOCOL *This
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+
+Returns:
+
+ TODO: add return values
+
+--*/
+{
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ EFI_TPL Tpl;
+ UINTN UnixStatus;
+
+ Tpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
+
+ UnixStatus = Private->UnixThunk->Tcflush (
+ Private->UnixHandle,
+ TCIOFLUSH
+ );
+ switch (UnixStatus) {
+ case EBADF:
+ DEBUG ((EFI_D_ERROR, "Invalid handle of serial device!\r\n"));
+ return EFI_DEVICE_ERROR;
+ case EINVAL:
+ DEBUG ((EFI_D_ERROR, "Invalid queue selector!\r\n"));
+ return EFI_DEVICE_ERROR;
+ case ENOTTY:
+ DEBUG ((EFI_D_ERROR, "The file associated with serial's handle is not a terminal!\r\n"));
+ return EFI_DEVICE_ERROR;
+ default:
+ DEBUG ((EFI_D_ERROR, "The serial IO device is reset successfully!\r\n"));
+ }
+
+ gBS->RestoreTPL (Tpl);
+
+ return This->SetAttributes (
+ This,
+ This->Mode->BaudRate,
+ This->Mode->ReceiveFifoDepth,
+ This->Mode->Timeout,
+ This->Mode->Parity,
+ (UINT8) This->Mode->DataBits,
+ This->Mode->StopBits
+ );
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoSetAttributes (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT64 BaudRate,
+ IN UINT32 ReceiveFifoDepth,
+ IN UINT32 Timeout,
+ IN EFI_PARITY_TYPE Parity,
+ IN UINT8 DataBits,
+ IN EFI_STOP_BITS_TYPE StopBits
+ )
+/*++
+
+Routine Description:
+
+ This function is used to set the attributes.
+
+Arguments:
+
+ This - A pointer to the EFI_SERIAL_IO_PROTOCOL structrue.
+ BaudRate - The Baud rate of the serial device.
+ ReceiveFifoDepth - The request depth of fifo on receive side.
+ Timeout - the request timeout for a single charact.
+ Parity - The type of parity used in serial device.
+ DataBits - Number of deata bits used in serial device.
+ StopBits - Number of stop bits used in serial device.
+
+Returns:
+ Status code
+
+ None
+
+--*/
+{
+ EFI_STATUS Status;
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ EFI_TPL Tpl;
+ EFI_DEVICE_PATH_PROTOCOL *NewDevicePath;
+
+ Tpl = gBS->RaiseTPL (TPL_NOTIFY);
+ Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
+
+ //
+ // Some of our arguments have defaults if a null value is passed in, and
+ // we must set the default values if a null argument is passed in.
+ //
+ if (BaudRate == 0) {
+ BaudRate = SERIAL_BAUD_DEFAULT;
+ }
+
+ if (ReceiveFifoDepth == 0) {
+ ReceiveFifoDepth = SERIAL_FIFO_DEFAULT;
+ }
+
+ if (Timeout == 0) {
+ Timeout = SERIAL_TIMEOUT_DEFAULT;
+ }
+
+ if (Parity == DefaultParity) {
+ Parity = NoParity;
+ }
+
+ if (DataBits == 0) {
+ DataBits = SERIAL_DATABITS_DEFAULT;
+ }
+
+ if (StopBits == DefaultStopBits) {
+ StopBits = OneStopBit;
+ }
+
+ //
+ // See if the new attributes already match the current attributes
+ //
+ if (Private->UartDevicePath.BaudRate == BaudRate &&
+ Private->UartDevicePath.DataBits == DataBits &&
+ Private->UartDevicePath.Parity == Parity &&
+ Private->UartDevicePath.StopBits == StopBits &&
+ Private->SerialIoMode.ReceiveFifoDepth == ReceiveFifoDepth &&
+ Private->SerialIoMode.Timeout == Timeout ) {
+ gBS->RestoreTPL(Tpl);
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Try to get options from serial device.
+ //
+ if (Private->UnixThunk->Tcgetattr (Private->UnixHandle, &Private->UnixTermios) == -1) {
+ Private->UnixThunk->Perror ("IoSetAttributes");
+ gBS->RestoreTPL (Tpl);
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Setting Baud Rate
+ //
+ Private->UnixThunk->Cfsetispeed (&Private->UnixTermios, ConvertBaud2Unix(BaudRate));
+ Private->UnixThunk->Cfsetospeed (&Private->UnixTermios, ConvertBaud2Unix(BaudRate));
+ //
+ // Setting DataBits
+ //
+ Private->UnixTermios.c_cflag &= ~CSIZE;
+ Private->UnixTermios.c_cflag |= ConvertByteSize2Unix (DataBits);
+ //
+ // Setting Parity
+ //
+ ConvertParity2Unix (&Private->UnixTermios, Parity);
+ //
+ // Setting StopBits
+ //
+ ConvertStopBit2Unix (&Private->UnixTermios, StopBits);
+ //
+ // Raw input
+ //
+ Private->UnixTermios.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
+ //
+ // Raw output
+ //
+ Private->UnixTermios.c_oflag &= ~OPOST;
+ //
+ // Support hardware flow control
+ //
+ Private->UnixTermios.c_cflag &= ~CRTSCTS;;
+ //
+ // Time out
+ //
+ Private->UnixTermios.c_cc[VMIN] = 0;
+ Private->UnixTermios.c_cc[VTIME] = (Timeout/1000000) * 10;
+
+ //
+ // Set the options
+ //
+ if (-1 == Private->UnixThunk->Tcsetattr (
+ Private->UnixHandle,
+ TCSANOW,
+ &Private->UnixTermios
+ )) {
+ DEBUG ((EFI_D_INFO, "Fail to set options for serial device!\r\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Update mode
+ //
+ Private->SerialIoMode.BaudRate = BaudRate;
+ Private->SerialIoMode.ReceiveFifoDepth = ReceiveFifoDepth;
+ Private->SerialIoMode.Timeout = Timeout;
+ Private->SerialIoMode.Parity = Parity;
+ Private->SerialIoMode.DataBits = DataBits;
+ Private->SerialIoMode.StopBits = StopBits;
+ //
+ // See if Device Path Node has actually changed
+ //
+ if (Private->UartDevicePath.BaudRate == BaudRate &&
+ Private->UartDevicePath.DataBits == DataBits &&
+ Private->UartDevicePath.Parity == Parity &&
+ Private->UartDevicePath.StopBits == StopBits ) {
+ gBS->RestoreTPL(Tpl);
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Update the device path
+ //
+ Private->UartDevicePath.BaudRate = BaudRate;
+ Private->UartDevicePath.DataBits = DataBits;
+ Private->UartDevicePath.Parity = (UINT8) Parity;
+ Private->UartDevicePath.StopBits = (UINT8) StopBits;
+
+ NewDevicePath = AppendDevicePathNode (
+ Private->ParentDevicePath,
+ (EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath
+ );
+ if (NewDevicePath == NULL) {
+ gBS->RestoreTPL (Tpl);
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (Private->Handle != NULL) {
+ Status = gBS->ReinstallProtocolInterface (
+ Private->Handle,
+ &gEfiDevicePathProtocolGuid,
+ Private->DevicePath,
+ NewDevicePath
+ );
+ if (EFI_ERROR (Status)) {
+ gBS->RestoreTPL (Tpl);
+ return Status;
+ }
+ }
+
+ if (Private->DevicePath != NULL) {
+ FreePool (Private->DevicePath);
+ }
+
+ Private->DevicePath = NewDevicePath;
+
+ gBS->RestoreTPL (Tpl);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoSetControl (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT32 Control
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ Control - TODO: add argument description
+
+Returns:
+
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+ EFI_SUCCESS - TODO: Add description for return value
+
+--*/
+{
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ UINTN Result;
+ UINTN Status;
+ struct termios Options;
+ EFI_TPL Tpl;
+
+ Tpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
+
+ Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMGET, &Status);
+
+ if (Result == -1) {
+ Private->UnixThunk->Perror ("SerialSetControl");
+ gBS->RestoreTPL (Tpl);
+ return EFI_DEVICE_ERROR;
+ }
+
+ Private->HardwareFlowControl = FALSE;
+ Private->SoftwareLoopbackEnable = FALSE;
+ Private->HardwareLoopbackEnable = FALSE;
+
+ if (Control & EFI_SERIAL_REQUEST_TO_SEND) {
+ Options.c_cflag |= TIOCM_RTS;
+ }
+
+ if (Control & EFI_SERIAL_DATA_TERMINAL_READY) {
+ Options.c_cflag |= TIOCM_DTR;
+ }
+
+ if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) {
+ Private->HardwareFlowControl = TRUE;
+ }
+
+ if (Control & EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) {
+ Private->SoftwareLoopbackEnable = TRUE;
+ }
+
+ if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) {
+ Private->HardwareLoopbackEnable = TRUE;
+ }
+
+ Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMSET, &Status);
+
+ if (Result == -1) {
+ Private->UnixThunk->Perror ("SerialSetControl");
+ gBS->RestoreTPL (Tpl);
+ return EFI_DEVICE_ERROR;
+ }
+
+ gBS->RestoreTPL (Tpl);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoGetControl (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ OUT UINT32 *Control
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ Control - TODO: add argument description
+
+Returns:
+
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+ EFI_SUCCESS - TODO: Add description for return value
+
+--*/
+{
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ UINTN Result;
+ UINTN Status;
+ UINT32 Bits;
+ EFI_TPL Tpl;
+ UINTN Bytes;
+
+ Tpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
+ Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMGET, &Status);
+ if (Result == -1) {
+ Private->UnixThunk->Perror ("SerialGetControl");
+ gBS->RestoreTPL (Tpl);
+ return EFI_DEVICE_ERROR;
+ }
+
+ if ((Status & TIOCM_CTS) == TIOCM_CTS) {
+ Bits |= EFI_SERIAL_CLEAR_TO_SEND;
+ }
+
+ if ((Status & TIOCM_DSR) == TIOCM_DSR) {
+ Bits |= EFI_SERIAL_DATA_SET_READY;
+ }
+
+ if ((Status & TIOCM_DTR) == TIOCM_DTR) {
+ Bits |= EFI_SERIAL_DATA_TERMINAL_READY;
+ }
+
+ if ((Status & TIOCM_RTS) == TIOCM_RTS) {
+ Bits |= EFI_SERIAL_REQUEST_TO_SEND;
+ }
+
+ if ((Status & TIOCM_RNG) == TIOCM_RNG) {
+ Bits |= EFI_SERIAL_RING_INDICATE;
+ }
+
+ if ((Status & TIOCM_CAR) == TIOCM_CAR) {
+ Bits |= EFI_SERIAL_CARRIER_DETECT;
+ }
+
+ if (Private->HardwareFlowControl) {
+ Bits |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
+ }
+
+ if (Private->SoftwareLoopbackEnable) {
+ Bits |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
+ }
+
+ if (Private->HardwareLoopbackEnable) {
+ Bits |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE;
+ }
+
+ Result = Private->UnixThunk->IoCtl (Private->UnixHandle, FIONREAD, &Bytes);
+ if (Result == -1) {
+ Private->UnixThunk->Perror ("SerialGetControl");
+ gBS->RestoreTPL (Tpl);
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (Bytes == 0) {
+ Bits |= EFI_SERIAL_INPUT_BUFFER_EMPTY;
+ }
+
+ *Control = Bits;
+
+ gBS->RestoreTPL (Tpl);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoWrite (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ IN VOID *Buffer
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ BufferSize - TODO: add argument description
+ Buffer - TODO: add argument description
+
+Returns:
+
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+ EFI_SUCCESS - TODO: Add description for return value
+
+--*/
+{
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ UINT8 *ByteBuffer;
+ UINT32 TotalBytesWritten;
+ UINT32 BytesToGo;
+ UINT32 BytesWritten;
+ UINT32 Index;
+ UINT32 Control;
+ EFI_TPL Tpl;
+
+ Tpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
+
+ ByteBuffer = (UINT8 *) Buffer;
+ TotalBytesWritten = 0;
+
+ if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) {
+ for (Index = 0; Index < *BufferSize; Index++) {
+ if (IsaSerialFifoAdd (&Private->Fifo, ByteBuffer[Index]) == EFI_SUCCESS) {
+ TotalBytesWritten++;
+ } else {
+ break;
+ }
+ }
+ } else {
+ BytesToGo = (*BufferSize);
+
+ do {
+ if (Private->HardwareFlowControl) {
+ //
+ // Send RTS
+ //
+ UnixSerialIoGetControl (&Private->SerialIo, &Control);
+ Control |= EFI_SERIAL_REQUEST_TO_SEND;
+ UnixSerialIoSetControl (&Private->SerialIo, Control);
+ }
+
+ //
+ // Do the write
+ //
+ BytesWritten = Private->UnixThunk->Write (
+ Private->UnixHandle,
+ &ByteBuffer[TotalBytesWritten],
+ BytesToGo
+ );
+
+ if (Private->HardwareFlowControl) {
+ //
+ // Assert RTS
+ //
+ UnixSerialIoGetControl (&Private->SerialIo, &Control);
+ Control &= ~ (UINT32) EFI_SERIAL_REQUEST_TO_SEND;
+ UnixSerialIoSetControl (&Private->SerialIo, Control);
+ }
+
+ TotalBytesWritten += BytesWritten;
+ BytesToGo -= BytesWritten;
+ } while (BytesToGo > 0);
+ }
+
+ *BufferSize = TotalBytesWritten;
+
+ gBS->RestoreTPL (Tpl);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+UnixSerialIoRead (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer
+ )
+/*++
+
+Routine Description:
+
+ TODO: Add function description
+
+Arguments:
+
+ This - TODO: add argument description
+ BufferSize - TODO: add argument description
+ Buffer - TODO: add argument description
+
+Returns:
+
+ EFI_DEVICE_ERROR - TODO: Add description for return value
+
+--*/
+{
+ UNIX_SERIAL_IO_PRIVATE_DATA *Private;
+ UINT32 BytesRead;
+ EFI_STATUS Status;
+ UINT32 Index;
+ UINT8 Data;
+ UINT32 Control;
+ EFI_TPL Tpl;
+
+ Tpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This);
+
+ //
+ // Do the read
+ //
+ if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) {
+ for (Index = 0, BytesRead = 0; Index < *BufferSize; Index++) {
+ if (IsaSerialFifoRemove (&Private->Fifo, &Data) == EFI_SUCCESS) {
+ ((UINT8 *) Buffer)[Index] = Data;
+ BytesRead++;
+ } else {
+ break;
+ }
+ }
+ } else {
+ if (Private->HardwareFlowControl) {
+ UnixSerialIoGetControl (&Private->SerialIo, &Control);
+ Control |= EFI_SERIAL_DATA_TERMINAL_READY;
+ UnixSerialIoSetControl (&Private->SerialIo, Control);
+ }
+
+ BytesRead = Private->UnixThunk->Read (Private->UnixHandle, Buffer, *BufferSize);
+ if (Private->HardwareFlowControl) {
+ UnixSerialIoGetControl (&Private->SerialIo, &Control);
+ Control &= ~ (UINT32) EFI_SERIAL_DATA_TERMINAL_READY;
+ UnixSerialIoSetControl (&Private->SerialIo, Control);
+ }
+
+ }
+
+ if (BytesRead != *BufferSize) {
+ Status = EFI_TIMEOUT;
+ } else {
+ Status = EFI_SUCCESS;
+ }
+
+ *BufferSize = (UINTN) BytesRead;
+
+ gBS->RestoreTPL (Tpl);
+
+ return Status;
+}
+
+BOOLEAN
+IsaSerialFifoFull (
+ IN SERIAL_DEV_FIFO *Fifo
+ )
+/*++
+
+ Routine Description:
+ Detect whether specific FIFO is full or not
+
+ Arguments:
+ Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
+
+ Returns:
+ TRUE: the FIFO is full
+ FALSE: the FIFO is not full
+
+--*/
+{
+ if (Fifo->Surplus == 0) {
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+BOOLEAN
+IsaSerialFifoEmpty (
+ IN SERIAL_DEV_FIFO *Fifo
+ )
+/*++
+
+ Routine Description:
+ Detect whether specific FIFO is empty or not
+
+ Arguments:
+ Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
+
+ Returns:
+ TRUE: the FIFO is empty
+ FALSE: the FIFO is not empty
+
+--*/
+{
+ if (Fifo->Surplus == SERIAL_MAX_BUFFER_SIZE) {
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+EFI_STATUS
+IsaSerialFifoAdd (
+ IN SERIAL_DEV_FIFO *Fifo,
+ IN UINT8 Data
+ )
+/*++
+
+ Routine Description:
+ Add data to specific FIFO
+
+ Arguments:
+ Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
+ Data UINT8: the data added to FIFO
+
+ Returns:
+ EFI_SUCCESS: Add data to specific FIFO successfully
+ EFI_OUT_RESOURCE: Failed to add data because FIFO is already full
+
+--*/
+// TODO: EFI_OUT_OF_RESOURCES - add return value to function comment
+{
+ //
+ // if FIFO full can not add data
+ //
+ if (IsaSerialFifoFull (Fifo)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // FIFO is not full can add data
+ //
+ Fifo->Data[Fifo->Last] = Data;
+ Fifo->Surplus--;
+ Fifo->Last++;
+ if (Fifo->Last >= SERIAL_MAX_BUFFER_SIZE) {
+ Fifo->Last = 0;
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+IsaSerialFifoRemove (
+ IN SERIAL_DEV_FIFO *Fifo,
+ OUT UINT8 *Data
+ )
+/*++
+
+ Routine Description:
+ Remove data from specific FIFO
+
+ Arguments:
+ Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO
+ Data UINT8*: the data removed from FIFO
+
+ Returns:
+ EFI_SUCCESS: Remove data from specific FIFO successfully
+ EFI_OUT_RESOURCE: Failed to remove data because FIFO is empty
+
+--*/
+// TODO: EFI_OUT_OF_RESOURCES - add return value to function comment
+{
+ //
+ // if FIFO is empty, no data can remove
+ //
+ if (IsaSerialFifoEmpty (Fifo)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // FIFO is not empty, can remove data
+ //
+ *Data = Fifo->Data[Fifo->First];
+ Fifo->Surplus++;
+ Fifo->First++;
+ if (Fifo->First >= SERIAL_MAX_BUFFER_SIZE) {
+ Fifo->First = 0;
+ }
+
+ return EFI_SUCCESS;
+}
|