diff options
Diffstat (limited to 'UnitTestFrameworkPkg/Library')
11 files changed, 3718 insertions, 0 deletions
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.c b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.c new file mode 100644 index 0000000..a6fc13e --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.c @@ -0,0 +1,119 @@ +/** @file
+ This library supports a Boot Services table library implementation that allows code dependent
+ upon UefiBootServicesTableLib to operate in an isolated execution environment such as within
+ the context of a host-based unit test framework.
+
+ The unit test should initialize the Boot Services database with any required elements
+ (e.g. protocols, events, handles, etc.) prior to the services being invoked by code under test.
+
+ It is strongly recommended to clean any global databases (e.g. protocol, event, handles, etc.) after
+ every unit test so the tests execute in a predictable manner from a clean state.
+
+ Copyright (c) Microsoft Corporation
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "UnitTestUefiBootServicesTableLib.h"
+
+EFI_HANDLE gImageHandle = NULL;
+EFI_SYSTEM_TABLE *gST = NULL;
+
+STATIC EFI_BOOT_SERVICES mBootServices = {
+ {
+ EFI_BOOT_SERVICES_SIGNATURE, // Signature
+ EFI_BOOT_SERVICES_REVISION, // Revision
+ sizeof (EFI_BOOT_SERVICES), // HeaderSize
+ 0, // CRC32
+ 0 // Reserved
+ },
+ (EFI_RAISE_TPL)UnitTestRaiseTpl, // RaiseTPL
+ (EFI_RESTORE_TPL)UnitTestRestoreTpl, // RestoreTPL
+ (EFI_ALLOCATE_PAGES)UnitTestAllocatePages, // AllocatePages
+ (EFI_FREE_PAGES)UnitTestFreePages, // FreePages
+ (EFI_GET_MEMORY_MAP)UnitTestGetMemoryMap, // GetMemoryMap
+ (EFI_ALLOCATE_POOL)UnitTestAllocatePool, // AllocatePool
+ (EFI_FREE_POOL)UnitTestFreePool, // FreePool
+ (EFI_CREATE_EVENT)UnitTestCreateEvent, // CreateEvent
+ (EFI_SET_TIMER)UnitTestSetTimer, // SetTimer
+ (EFI_WAIT_FOR_EVENT)UnitTestWaitForEvent, // WaitForEvent
+ (EFI_SIGNAL_EVENT)UnitTestSignalEvent, // SignalEvent
+ (EFI_CLOSE_EVENT)UnitTestCloseEvent, // CloseEvent
+ (EFI_CHECK_EVENT)UnitTestCheckEvent, // CheckEvent
+ (EFI_INSTALL_PROTOCOL_INTERFACE)UnitTestInstallProtocolInterface, // InstallProtocolInterface
+ (EFI_REINSTALL_PROTOCOL_INTERFACE)UnitTestReinstallProtocolInterface, // ReinstallProtocolInterface
+ (EFI_UNINSTALL_PROTOCOL_INTERFACE)UnitTestUninstallProtocolInterface, // UninstallProtocolInterface
+ (EFI_HANDLE_PROTOCOL)UnitTestHandleProtocol, // HandleProtocol
+ (VOID *)NULL, // Reserved
+ (EFI_REGISTER_PROTOCOL_NOTIFY)UnitTestRegisterProtocolNotify, // RegisterProtocolNotify
+ (EFI_LOCATE_HANDLE)UnitTestLocateHandle, // LocateHandle
+ (EFI_LOCATE_DEVICE_PATH)UnitTestLocateDevicePath, // LocateDevicePath
+ (EFI_INSTALL_CONFIGURATION_TABLE)UnitTestInstallConfigurationTable, // InstallConfigurationTable
+ (EFI_IMAGE_LOAD)UnitTestLoadImage, // LoadImage
+ (EFI_IMAGE_START)UnitTestStartImage, // StartImage
+ (EFI_EXIT)UnitTestExit, // Exit
+ (EFI_IMAGE_UNLOAD)UnitTestUnloadImage, // UnloadImage
+ (EFI_EXIT_BOOT_SERVICES)UnitTestExitBootServices, // ExitBootServices
+ (EFI_GET_NEXT_MONOTONIC_COUNT)UnitTestGetNextMonotonicCount, // GetNextMonotonicCount
+ (EFI_STALL)UnitTestStall, // Stall
+ (EFI_SET_WATCHDOG_TIMER)UnitTestSetWatchdogTimer, // SetWatchdogTimer
+ (EFI_CONNECT_CONTROLLER)UnitTestConnectController, // ConnectController
+ (EFI_DISCONNECT_CONTROLLER)UnitTestDisconnectController, // DisconnectController
+ (EFI_OPEN_PROTOCOL)UnitTestOpenProtocol, // OpenProtocol
+ (EFI_CLOSE_PROTOCOL)UnitTestCloseProtocol, // CloseProtocol
+ (EFI_OPEN_PROTOCOL_INFORMATION)UnitTestOpenProtocolInformation, // OpenProtocolInformation
+ (EFI_PROTOCOLS_PER_HANDLE)UnitTestProtocolsPerHandle, // ProtocolsPerHandle
+ (EFI_LOCATE_HANDLE_BUFFER)UnitTestLocateHandleBuffer, // LocateHandleBuffer
+ (EFI_LOCATE_PROTOCOL)UnitTestLocateProtocol, // LocateProtocol
+ (EFI_INSTALL_MULTIPLE_PROTOCOL_INTERFACES)UnitTestInstallMultipleProtocolInterfaces, // InstallMultipleProtocolInterfaces
+ (EFI_UNINSTALL_MULTIPLE_PROTOCOL_INTERFACES)UnitTestUninstallMultipleProtocolInterfaces, // UninstallMultipleProtocolInterfaces
+ (EFI_CALCULATE_CRC32)UnitTestCalculateCrc32, // CalculateCrc32
+ (EFI_COPY_MEM)CopyMem, // CopyMem
+ (EFI_SET_MEM)SetMem, // SetMem
+ (EFI_CREATE_EVENT_EX)UnitTestCreateEventEx // CreateEventEx
+};
+
+EFI_BOOT_SERVICES *gBS = &mBootServices;
+
+/**
+ The constructor function caches the pointer of Boot Services Table.
+
+ The constructor function caches the pointer of Boot Services Table through System Table.
+ It will ASSERT() if the pointer of System Table is NULL.
+ It will ASSERT() if the pointer of Boot Services Table is NULL.
+ It will always return EFI_SUCCESS.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestUefiBootServicesTableLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ //
+ // Cache the Image Handle
+ //
+ gImageHandle = ImageHandle;
+ ASSERT (gImageHandle != NULL);
+
+ //
+ // Cache pointer to the EFI System Table
+ //
+
+ // Note: The system table is not implemented
+ gST = NULL;
+
+ //
+ // Cache pointer to the EFI Boot Services Table
+ //
+ gBS = SystemTable->BootServices;
+ ASSERT (gBS != NULL);
+
+ return EFI_SUCCESS;
+}
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.h b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.h new file mode 100644 index 0000000..82853bb --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.h @@ -0,0 +1,1042 @@ +/** @file
+ An internal header file for the Unit Test instance of the UEFI Boot Services Table Library.
+
+ This file includes common header files, defines internal structure and functions used by
+ the library implementation.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef UEFI_BOOT_SERVICES_TABLE_LIB_UNIT_TEST_H_
+#define UEFI_BOOT_SERVICES_TABLE_LIB_UNIT_TEST_H_
+
+#include <Uefi.h>
+
+#include <Pi/PiMultiPhase.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UnitTestLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+/**
+ Raise the task priority level to the new level.
+ High level is implemented by disabling processor interrupts.
+
+ @param NewTpl New task priority level
+
+ @return The previous task priority level
+
+**/
+EFI_TPL
+EFIAPI
+UnitTestRaiseTpl (
+ IN EFI_TPL NewTpl
+ );
+
+/**
+ Lowers the task priority to the previous value. If the new
+ priority unmasks events at a higher priority, they are dispatched.
+
+ @param NewTpl New, lower, task priority
+
+**/
+VOID
+EFIAPI
+UnitTestRestoreTpl (
+ IN EFI_TPL NewTpl
+ );
+
+/**
+ Allocates pages from the memory map.
+
+ @param Type The type of allocation to perform
+ @param MemoryType The type of memory to turn the allocated pages
+ into
+ @param NumberOfPages The number of pages to allocate
+ @param Memory A pointer to receive the base allocated memory
+ address
+
+ @return Status. On success, Memory is filled in with the base address allocated
+ @retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in
+ spec.
+ @retval EFI_NOT_FOUND Could not allocate pages match the requirement.
+ @retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
+ @retval EFI_SUCCESS Pages successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestAllocatePages (
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN NumberOfPages,
+ IN OUT EFI_PHYSICAL_ADDRESS *Memory
+ );
+
+/**
+ Frees previous allocated pages.
+
+ @param Memory Base address of memory being freed
+ @param NumberOfPages The number of pages to free
+
+ @retval EFI_NOT_FOUND Could not find the entry that covers the range
+ @retval EFI_INVALID_PARAMETER Address not aligned
+ @return EFI_SUCCESS -Pages successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestFreePages (
+ IN EFI_PHYSICAL_ADDRESS Memory,
+ IN UINTN NumberOfPages
+ );
+
+/**
+ This function returns a copy of the current memory map. The map is an array of
+ memory descriptors, each of which describes a contiguous block of memory.
+
+ @param MemoryMapSize A pointer to the size, in bytes, of the
+ MemoryMap buffer. On input, this is the size of
+ the buffer allocated by the caller. On output,
+ it is the size of the buffer returned by the
+ firmware if the buffer was large enough, or the
+ size of the buffer needed to contain the map if
+ the buffer was too small.
+ @param MemoryMap A pointer to the buffer in which firmware places
+ the current memory map.
+ @param MapKey A pointer to the location in which firmware
+ returns the key for the current memory map.
+ @param DescriptorSize A pointer to the location in which firmware
+ returns the size, in bytes, of an individual
+ EFI_MEMORY_DESCRIPTOR.
+ @param DescriptorVersion A pointer to the location in which firmware
+ returns the version number associated with the
+ EFI_MEMORY_DESCRIPTOR.
+
+ @retval EFI_SUCCESS The memory map was returned in the MemoryMap
+ buffer.
+ @retval EFI_BUFFER_TOO_SMALL The MemoryMap buffer was too small. The current
+ buffer size needed to hold the memory map is
+ returned in MemoryMapSize.
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestGetMemoryMap (
+ IN OUT UINTN *MemoryMapSize,
+ IN OUT EFI_MEMORY_DESCRIPTOR *MemoryMap,
+ OUT UINTN *MapKey,
+ OUT UINTN *DescriptorSize,
+ OUT UINT32 *DescriptorVersion
+ );
+
+/**
+ Allocate pool of a particular type.
+
+ @param PoolType Type of pool to allocate
+ @param Size The amount of pool to allocate
+ @param Buffer The address to return a pointer to the allocated
+ pool
+
+ @retval EFI_INVALID_PARAMETER PoolType not valid or Buffer is NULL
+ @retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
+ @retval EFI_SUCCESS Pool successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestAllocatePool (
+ IN EFI_MEMORY_TYPE PoolType,
+ IN UINTN Size,
+ OUT VOID **Buffer
+ );
+
+/**
+ Frees pool.
+
+ @param Buffer The allocated pool entry to free
+
+ @retval EFI_INVALID_PARAMETER Buffer is not a valid value.
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestFreePool (
+ IN VOID *Buffer
+ );
+
+/**
+ Frees pool.
+
+ @param Buffer The allocated pool entry to free
+ @param PoolType Pointer to pool type
+
+ @retval EFI_INVALID_PARAMETER Buffer is not a valid value.
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestInternalFreePool (
+ IN VOID *Buffer,
+ OUT EFI_MEMORY_TYPE *PoolType OPTIONAL
+ );
+
+/**
+ Creates an event.
+
+ @param Type The type of event to create and its mode and
+ attributes
+ @param NotifyTpl The task priority level of event notifications
+ @param NotifyFunction Pointer to the events notification function
+ @param NotifyContext Pointer to the notification functions context;
+ corresponds to parameter "Context" in the
+ notification function
+ @param Event Pointer to the newly created event if the call
+ succeeds; undefined otherwise
+
+ @retval EFI_SUCCESS The event structure was created
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value
+ @retval EFI_OUT_OF_RESOURCES The event could not be allocated
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCreateEvent (
+ IN UINT32 Type,
+ IN EFI_TPL NotifyTpl,
+ IN EFI_EVENT_NOTIFY NotifyFunction, OPTIONAL
+ IN VOID *NotifyContext, OPTIONAL
+ OUT EFI_EVENT *Event
+ );
+
+/**
+ Sets the type of timer and the trigger time for a timer event.
+
+ @param UserEvent The timer event that is to be signaled at the
+ specified time
+ @param Type The type of time that is specified in
+ TriggerTime
+ @param TriggerTime The number of 100ns units until the timer
+ expires
+
+ @retval EFI_SUCCESS The event has been set to be signaled at the
+ requested time
+ @retval EFI_INVALID_PARAMETER Event or Type is not valid
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestSetTimer (
+ IN EFI_EVENT UserEvent,
+ IN EFI_TIMER_DELAY Type,
+ IN UINT64 TriggerTime
+ );
+
+/**
+ Stops execution until an event is signaled.
+
+ @param NumberOfEvents The number of events in the UserEvents array
+ @param UserEvents An array of EFI_EVENT
+ @param UserIndex Pointer to the index of the event which
+ satisfied the wait condition
+
+ @retval EFI_SUCCESS The event indicated by Index was signaled.
+ @retval EFI_INVALID_PARAMETER The event indicated by Index has a notification
+ function or Event was not a valid type
+ @retval EFI_UNSUPPORTED The current TPL is not TPL_APPLICATION
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestWaitForEvent (
+ IN UINTN NumberOfEvents,
+ IN EFI_EVENT *UserEvents,
+ OUT UINTN *UserIndex
+ );
+
+/**
+ Signals the event. Queues the event to be notified if needed.
+
+ @param UserEvent The event to signal .
+
+ @retval EFI_INVALID_PARAMETER Parameters are not valid.
+ @retval EFI_SUCCESS The event was signaled.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestSignalEvent (
+ IN EFI_EVENT UserEvent
+ );
+
+/**
+ Closes an event and frees the event structure.
+
+ @param UserEvent Event to close
+
+ @retval EFI_INVALID_PARAMETER Parameters are not valid.
+ @retval EFI_SUCCESS The event has been closed
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCloseEvent (
+ IN EFI_EVENT UserEvent
+ );
+
+/**
+ Check the status of an event.
+
+ @param UserEvent The event to check
+
+ @retval EFI_SUCCESS The event is in the signaled state
+ @retval EFI_NOT_READY The event is not in the signaled state
+ @retval EFI_INVALID_PARAMETER Event is of type EVT_NOTIFY_SIGNAL
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCheckEvent (
+ IN EFI_EVENT UserEvent
+ );
+
+/**
+ Wrapper function to UnitTestInstallProtocolInterfaceNotify. This is the public API which
+ Calls the private one which contains a BOOLEAN parameter for notifications
+
+ @param UserHandle The handle to install the protocol handler on,
+ or NULL if a new handle is to be allocated
+ @param Protocol The protocol to add to the handle
+ @param InterfaceType Indicates whether Interface is supplied in
+ native form.
+ @param Interface The interface for the protocol being added
+
+ @return Status code
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestInstallProtocolInterface (
+ IN OUT EFI_HANDLE *UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_INTERFACE_TYPE InterfaceType,
+ IN VOID *Interface
+ );
+
+/**
+ Reinstall a protocol interface on a device handle. The OldInterface for Protocol is replaced by the NewInterface.
+
+ @param UserHandle Handle on which the interface is to be
+ reinstalled
+ @param Protocol The numeric ID of the interface
+ @param OldInterface A pointer to the old interface
+ @param NewInterface A pointer to the new interface
+
+ @retval EFI_SUCCESS The protocol interface was installed
+ @retval EFI_NOT_FOUND The OldInterface on the handle was not found
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestReinstallProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN VOID *OldInterface,
+ IN VOID *NewInterface
+ );
+
+/**
+ Uninstalls all instances of a protocol:interfacer from a handle.
+ If the last protocol interface is remove from the handle, the
+ handle is freed.
+
+ @param UserHandle The handle to remove the protocol handler from
+ @param Protocol The protocol, of protocol:interface, to remove
+ @param Interface The interface, of protocol:interface, to remove
+
+ @retval EFI_INVALID_PARAMETER Protocol is NULL.
+ @retval EFI_SUCCESS Protocol interface successfully uninstalled.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestUninstallProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ );
+
+/**
+ Queries a handle to determine if it supports a specified protocol.
+
+ @param UserHandle The handle being queried.
+ @param Protocol The published unique identifier of the protocol.
+ @param Interface Supplies the address where a pointer to the
+ corresponding Protocol Interface is returned.
+
+ @return The requested protocol interface for the handle
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestHandleProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT VOID **Interface
+ );
+
+/**
+ Add a new protocol notification record for the request protocol.
+
+ @param Protocol The requested protocol to add the notify
+ registration
+ @param Event The event to signal
+ @param Registration Returns the registration record
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_SUCCESS Successfully returned the registration record
+ that has been added
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestRegisterProtocolNotify (
+ IN EFI_GUID *Protocol,
+ IN EFI_EVENT Event,
+ OUT VOID **Registration
+ );
+
+/**
+ Locates the requested handle(s) and returns them in Buffer.
+
+ @param SearchType The type of search to perform to locate the
+ handles
+ @param Protocol The protocol to search for
+ @param SearchKey Dependant on SearchType
+ @param BufferSize On input the size of Buffer. On output the
+ size of data returned.
+ @param Buffer The buffer to return the results in
+
+ @retval EFI_BUFFER_TOO_SMALL Buffer too small, required buffer size is
+ returned in BufferSize.
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_SUCCESS Successfully found the requested handle(s) and
+ returns them in Buffer.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateHandle (
+ IN EFI_LOCATE_SEARCH_TYPE SearchType,
+ IN EFI_GUID *Protocol OPTIONAL,
+ IN VOID *SearchKey OPTIONAL,
+ IN OUT UINTN *BufferSize,
+ OUT EFI_HANDLE *Buffer
+ );
+
+/**
+ Locates the handle to a device on the device path that best matches the specified protocol.
+
+ @param Protocol The protocol to search for.
+ @param DevicePath On input, a pointer to a pointer to the device
+ path. On output, the device path pointer is
+ modified to point to the remaining part of the
+ devicepath.
+ @param Device A pointer to the returned device handle.
+
+ @retval EFI_SUCCESS The resulting handle was returned.
+ @retval EFI_NOT_FOUND No handles matched the search.
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateDevicePath (
+ IN EFI_GUID *Protocol,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath,
+ OUT EFI_HANDLE *Device
+ );
+
+/**
+ Boot Service called to add, modify, or remove a system configuration table from
+ the EFI System Table.
+
+ @param Guid Pointer to the GUID for the entry to add, update, or
+ remove
+ @param Table Pointer to the configuration table for the entry to add,
+ update, or remove, may be NULL.
+
+ @return EFI_SUCCESS Guid, Table pair added, updated, or removed.
+ @return EFI_INVALID_PARAMETER Input GUID not valid.
+ @return EFI_NOT_FOUND Attempted to delete non-existant entry
+ @return EFI_OUT_OF_RESOURCES Not enough memory available
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestInstallConfigurationTable (
+ IN EFI_GUID *Guid,
+ IN VOID *Table
+ );
+
+/**
+ Loads an EFI image into memory and returns a handle to the image.
+
+ @param BootPolicy If TRUE, indicates that the request originates
+ from the boot manager, and that the boot
+ manager is attempting to load FilePath as a
+ boot selection.
+ @param ParentImageHandle The caller's image handle.
+ @param FilePath The specific file path from which the image is
+ loaded.
+ @param SourceBuffer If not NULL, a pointer to the memory location
+ containing a copy of the image to be loaded.
+ @param SourceSize The size in bytes of SourceBuffer.
+ @param ImageHandle Pointer to the returned image handle that is
+ created when the image is successfully loaded.
+
+ @retval EFI_SUCCESS The image was loaded into memory.
+ @retval EFI_NOT_FOUND The FilePath was not found.
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
+ @retval EFI_UNSUPPORTED The image type is not supported, or the device
+ path cannot be parsed to locate the proper
+ protocol for loading the file.
+ @retval EFI_OUT_OF_RESOURCES Image was not loaded due to insufficient
+ resources.
+ @retval EFI_LOAD_ERROR Image was not loaded because the image format was corrupt or not
+ understood.
+ @retval EFI_DEVICE_ERROR Image was not loaded because the device returned a read error.
+ @retval EFI_ACCESS_DENIED Image was not loaded because the platform policy prohibits the
+ image from being loaded. NULL is returned in *ImageHandle.
+ @retval EFI_SECURITY_VIOLATION Image was loaded and an ImageHandle was created with a
+ valid EFI_LOADED_IMAGE_PROTOCOL. However, the current
+ platform policy specifies that the image should not be started.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLoadImage (
+ IN BOOLEAN BootPolicy,
+ IN EFI_HANDLE ParentImageHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath,
+ IN VOID *SourceBuffer OPTIONAL,
+ IN UINTN SourceSize,
+ OUT EFI_HANDLE *ImageHandle
+ );
+
+/**
+ Transfer control to a loaded image's entry point.
+
+ @param ImageHandle Handle of image to be started.
+ @param ExitDataSize Pointer of the size to ExitData
+ @param ExitData Pointer to a pointer to a data buffer that
+ includes a Null-terminated string,
+ optionally followed by additional binary data.
+ The string is a description that the caller may
+ use to further indicate the reason for the
+ image's exit.
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_OUT_OF_RESOURCES No enough buffer to allocate
+ @retval EFI_SECURITY_VIOLATION The current platform policy specifies that the image should not be started.
+ @retval EFI_SUCCESS Successfully transfer control to the image's
+ entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestStartImage (
+ IN EFI_HANDLE ImageHandle,
+ OUT UINTN *ExitDataSize,
+ OUT CHAR16 **ExitData OPTIONAL
+ );
+
+/**
+ Terminates the currently loaded EFI image and returns control to boot services.
+
+ @param ImageHandle Handle that identifies the image. This
+ parameter is passed to the image on entry.
+ @param Status The image's exit code.
+ @param ExitDataSize The size, in bytes, of ExitData. Ignored if
+ ExitStatus is EFI_SUCCESS.
+ @param ExitData Pointer to a data buffer that includes a
+ Null-terminated Unicode string, optionally
+ followed by additional binary data. The string
+ is a description that the caller may use to
+ further indicate the reason for the image's
+ exit.
+
+ @retval EFI_INVALID_PARAMETER Image handle is NULL or it is not current
+ image.
+ @retval EFI_SUCCESS Successfully terminates the currently loaded
+ EFI image.
+ @retval EFI_ACCESS_DENIED Should never reach there.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate pool
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestExit (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_STATUS Status,
+ IN UINTN ExitDataSize,
+ IN CHAR16 *ExitData OPTIONAL
+ );
+
+/**
+ Unloads an image.
+
+ @param ImageHandle Handle that identifies the image to be
+ unloaded.
+
+ @retval EFI_SUCCESS The image has been unloaded.
+ @retval EFI_UNSUPPORTED The image has been started, and does not support
+ unload.
+ @retval EFI_INVALID_PARAMPETER ImageHandle is not a valid image handle.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestUnloadImage (
+ IN EFI_HANDLE ImageHandle
+ );
+
+/**
+ Terminates all boot services.
+
+ @param ImageHandle Handle that identifies the exiting image.
+ @param MapKey Key to the latest memory map.
+
+ @retval EFI_SUCCESS Boot Services terminated
+ @retval EFI_INVALID_PARAMETER MapKey is incorrect.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestExitBootServices (
+ IN EFI_HANDLE ImageHandle,
+ IN UINTN MapKey
+ );
+
+/**
+ Returns a monotonically increasing count for the platform.
+
+ @param[out] Count The pointer to returned value.
+
+ @retval EFI_SUCCESS The next monotonic count was returned.
+ @retval EFI_INVALID_PARAMETER Count is NULL.
+ @retval EFI_DEVICE_ERROR The device is not functioning properly.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestGetNextMonotonicCount (
+ OUT UINT64 *Count
+ );
+
+/**
+ Introduces a fine-grained stall.
+
+ @param Microseconds The number of microseconds to stall execution.
+
+ @retval EFI_SUCCESS Execution was stalled for at least the requested
+ amount of microseconds.
+ @retval EFI_NOT_AVAILABLE_YET gMetronome is not available yet
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestStall (
+ IN UINTN Microseconds
+ );
+
+/**
+ Sets the system's watchdog timer.
+
+ @param Timeout The number of seconds to set the watchdog timer to.
+ A value of zero disables the timer.
+ @param WatchdogCode The numeric code to log on a watchdog timer timeout
+ event. The firmware reserves codes 0x0000 to 0xFFFF.
+ Loaders and operating systems may use other timeout
+ codes.
+ @param DataSize The size, in bytes, of WatchdogData.
+ @param WatchdogData A data buffer that includes a Null-terminated Unicode
+ string, optionally followed by additional binary data.
+ The string is a description that the call may use to
+ further indicate the reason to be logged with a
+ watchdog event.
+
+ @return EFI_SUCCESS Timeout has been set
+ @return EFI_NOT_AVAILABLE_YET WatchdogTimer is not available yet
+ @return EFI_UNSUPPORTED System does not have a timer (currently not used)
+ @return EFI_DEVICE_ERROR Could not complete due to hardware error
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestSetWatchdogTimer (
+ IN UINTN Timeout,
+ IN UINT64 WatchdogCode,
+ IN UINTN DataSize,
+ IN CHAR16 *WatchdogData OPTIONAL
+ );
+
+/**
+ Connects one or more drivers to a controller.
+
+ @param ControllerHandle The handle of the controller to which driver(s) are to be connected.
+ @param DriverImageHandle A pointer to an ordered list handles that support the
+ EFI_DRIVER_BINDING_PROTOCOL.
+ @param RemainingDevicePath A pointer to the device path that specifies a child of the
+ controller specified by ControllerHandle.
+ @param Recursive If TRUE, then ConnectController() is called recursively
+ until the entire tree of controllers below the controller specified
+ by ControllerHandle have been created. If FALSE, then
+ the tree of controllers is only expanded one level.
+
+ @retval EFI_SUCCESS 1) One or more drivers were connected to ControllerHandle.
+ 2) No drivers were connected to ControllerHandle, but
+ RemainingDevicePath is not NULL, and it is an End Device
+ Path Node.
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+ @retval EFI_NOT_FOUND 1) There are no EFI_DRIVER_BINDING_PROTOCOL instances
+ present in the system.
+ 2) No drivers were connected to ControllerHandle.
+ @retval EFI_SECURITY_VIOLATION
+ The user has no permission to start UEFI device drivers on the device path
+ associated with the ControllerHandle or specified by the RemainingDevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestConnectController (
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE *DriverImageHandle OPTIONAL,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL,
+ IN BOOLEAN Recursive
+ );
+
+/**
+ Disconnects a controller from a driver
+
+ @param ControllerHandle ControllerHandle The handle of
+ the controller from which
+ driver(s) are to be
+ disconnected.
+ @param DriverImageHandle DriverImageHandle The driver to
+ disconnect from ControllerHandle.
+ @param ChildHandle ChildHandle The handle of the
+ child to destroy.
+
+ @retval EFI_SUCCESS One or more drivers were
+ disconnected from the controller.
+ @retval EFI_SUCCESS On entry, no drivers are managing
+ ControllerHandle.
+ @retval EFI_SUCCESS DriverImageHandle is not NULL,
+ and on entry DriverImageHandle is
+ not managing ControllerHandle.
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+ @retval EFI_INVALID_PARAMETER DriverImageHandle is not NULL,
+ and it is not a valid EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL, and it
+ is not a valid EFI_HANDLE.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources
+ available to disconnect any
+ drivers from ControllerHandle.
+ @retval EFI_DEVICE_ERROR The controller could not be
+ disconnected because of a device
+ error.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestDisconnectController (
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE DriverImageHandle OPTIONAL,
+ IN EFI_HANDLE ChildHandle OPTIONAL
+ );
+
+/**
+ Locates the installed protocol handler for the handle, and
+ invokes it to obtain the protocol interface. Usage information
+ is registered in the protocol data base.
+
+ @param UserHandle The handle to obtain the protocol interface on
+ @param Protocol The ID of the protocol
+ @param Interface The location to return the protocol interface
+ @param ImageHandle The handle of the Image that is opening the
+ protocol interface specified by Protocol and
+ Interface.
+ @param ControllerHandle The controller handle that is requiring this
+ interface.
+ @param Attributes The open mode of the protocol interface
+ specified by Handle and Protocol.
+
+ @retval EFI_INVALID_PARAMETER Protocol is NULL.
+ @retval EFI_SUCCESS Get the protocol interface.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestOpenProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT VOID **Interface OPTIONAL,
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_HANDLE ControllerHandle,
+ IN UINT32 Attributes
+ );
+
+/**
+ Closes a protocol on a handle that was opened using OpenProtocol().
+
+ @param UserHandle The handle for the protocol interface that was
+ previously opened with OpenProtocol(), and is
+ now being closed.
+ @param Protocol The published unique identifier of the protocol.
+ It is the caller's responsibility to pass in a
+ valid GUID.
+ @param AgentHandle The handle of the agent that is closing the
+ protocol interface.
+ @param ControllerHandle If the agent that opened a protocol is a driver
+ that follows the EFI Driver Model, then this
+ parameter is the controller handle that required
+ the protocol interface. If the agent does not
+ follow the EFI Driver Model, then this parameter
+ is optional and may be NULL.
+
+ @retval EFI_SUCCESS The protocol instance was closed.
+ @retval EFI_INVALID_PARAMETER Handle, AgentHandle or ControllerHandle is not a
+ valid EFI_HANDLE.
+ @retval EFI_NOT_FOUND Can not find the specified protocol or
+ AgentHandle.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCloseProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_HANDLE AgentHandle,
+ IN EFI_HANDLE ControllerHandle
+ );
+
+/**
+ Return information about Opened protocols in the system
+
+ @param UserHandle The handle to close the protocol interface on
+ @param Protocol The ID of the protocol
+ @param EntryBuffer A pointer to a buffer of open protocol
+ information in the form of
+ EFI_OPEN_PROTOCOL_INFORMATION_ENTRY structures.
+ @param EntryCount Number of EntryBuffer entries
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestOpenProtocolInformation (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT EFI_OPEN_PROTOCOL_INFORMATION_ENTRY **EntryBuffer,
+ OUT UINTN *EntryCount
+ );
+
+/**
+ Retrieves the list of protocol interface GUIDs that are installed on a handle in a buffer allocated
+ from pool.
+
+ @param UserHandle The handle from which to retrieve the list of
+ protocol interface GUIDs.
+ @param ProtocolBuffer A pointer to the list of protocol interface GUID
+ pointers that are installed on Handle.
+ @param ProtocolBufferCount A pointer to the number of GUID pointers present
+ in ProtocolBuffer.
+
+ @retval EFI_SUCCESS The list of protocol interface GUIDs installed
+ on Handle was returned in ProtocolBuffer. The
+ number of protocol interface GUIDs was returned
+ in ProtocolBufferCount.
+ @retval EFI_INVALID_PARAMETER Handle is NULL.
+ @retval EFI_INVALID_PARAMETER Handle is not a valid EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER ProtocolBuffer is NULL.
+ @retval EFI_INVALID_PARAMETER ProtocolBufferCount is NULL.
+ @retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the
+ results.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestProtocolsPerHandle (
+ IN EFI_HANDLE UserHandle,
+ OUT EFI_GUID ***ProtocolBuffer,
+ OUT UINTN *ProtocolBufferCount
+ );
+
+/**
+ Function returns an array of handles that support the requested protocol
+ in a buffer allocated from pool. This is a version of UnitTestLocateHandle()
+ that allocates a buffer for the caller.
+
+ @param SearchType Specifies which handle(s) are to be returned.
+ @param Protocol Provides the protocol to search by. This
+ parameter is only valid for SearchType
+ ByProtocol.
+ @param SearchKey Supplies the search key depending on the
+ SearchType.
+ @param NumberHandles The number of handles returned in Buffer.
+ @param Buffer A pointer to the buffer to return the requested
+ array of handles that support Protocol.
+
+ @retval EFI_SUCCESS The result array of handles was returned.
+ @retval EFI_NOT_FOUND No handles match the search.
+ @retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the
+ matching results.
+ @retval EFI_INVALID_PARAMETER One or more parameters are not valid.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateHandleBuffer (
+ IN EFI_LOCATE_SEARCH_TYPE SearchType,
+ IN EFI_GUID *Protocol OPTIONAL,
+ IN VOID *SearchKey OPTIONAL,
+ IN OUT UINTN *NumberHandles,
+ OUT EFI_HANDLE **Buffer
+ );
+
+/**
+ Return the first Protocol Interface that matches the Protocol GUID. If
+ Registration is passed in, return a Protocol Instance that was just add
+ to the system. If Registration is NULL return the first Protocol Interface
+ you find.
+
+ @param Protocol The protocol to search for
+ @param Registration Optional Registration Key returned from
+ RegisterProtocolNotify()
+ @param Interface Return the Protocol interface (instance).
+
+ @retval EFI_SUCCESS If a valid Interface is returned
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_NOT_FOUND Protocol interface not found
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateProtocol (
+ IN EFI_GUID *Protocol,
+ IN VOID *Registration OPTIONAL,
+ OUT VOID **Interface
+ );
+
+/**
+ Installs a list of protocol interface into the boot services environment.
+ This function calls InstallProtocolInterface() in a loop. If any error
+ occurs all the protocols added by this function are removed. This is
+ basically a lib function to save space.
+
+ @param Handle The handle to install the protocol handlers on,
+ or NULL if a new handle is to be allocated
+ @param ... EFI_GUID followed by protocol instance. A NULL
+ terminates the list. The pairs are the
+ arguments to InstallProtocolInterface(). All the
+ protocols are added to Handle.
+
+ @retval EFI_SUCCESS All the protocol interface was installed.
+ @retval EFI_OUT_OF_RESOURCES There was not enough memory in pool to install all the protocols.
+ @retval EFI_ALREADY_STARTED A Device Path Protocol instance was passed in that is already present in
+ the handle database.
+ @retval EFI_INVALID_PARAMETER Handle is NULL.
+ @retval EFI_INVALID_PARAMETER Protocol is already installed on the handle specified by Handle.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestInstallMultipleProtocolInterfaces (
+ IN OUT EFI_HANDLE *Handle,
+ ...
+ );
+
+/**
+ Uninstalls a list of protocol interface in the boot services environment.
+ This function calls UninstallProtocolInterface() in a loop. This is
+ basically a lib function to save space.
+
+ @param Handle The handle to uninstall the protocol
+ @param ... EFI_GUID followed by protocol instance. A NULL
+ terminates the list. The pairs are the
+ arguments to UninstallProtocolInterface(). All
+ the protocols are added to Handle.
+
+ @return Status code
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestUninstallMultipleProtocolInterfaces (
+ IN EFI_HANDLE Handle,
+ ...
+ );
+
+/**
+ Computes and returns a 32-bit CRC for a data buffer.
+
+ @param[in] Data A pointer to the buffer on which the 32-bit CRC is to be computed.
+ @param[in] DataSize The number of bytes in the buffer Data.
+ @param[out] Crc32 The 32-bit CRC that was computed for the data buffer specified by Data
+ and DataSize.
+
+ @retval EFI_SUCCESS The 32-bit CRC was computed for the data buffer and returned in
+ Crc32.
+ @retval EFI_INVALID_PARAMETER Data is NULL.
+ @retval EFI_INVALID_PARAMETER Crc32 is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is 0.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCalculateCrc32 (
+ IN VOID *Data,
+ IN UINTN DataSize,
+ OUT UINT32 *Crc32
+ );
+
+/**
+ Creates an event in a group.
+
+ @param Type The type of event to create and its mode and
+ attributes
+ @param NotifyTpl The task priority level of event notifications
+ @param NotifyFunction Pointer to the events notification function
+ @param NotifyContext Pointer to the notification functions context;
+ corresponds to parameter "Context" in the
+ notification function
+ @param EventGroup GUID for EventGroup if NULL act the same as
+ gBS->CreateEvent().
+ @param Event Pointer to the newly created event if the call
+ succeeds; undefined otherwise
+
+ @retval EFI_SUCCESS The event structure was created
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value
+ @retval EFI_OUT_OF_RESOURCES The event could not be allocated
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCreateEventEx (
+ IN UINT32 Type,
+ IN EFI_TPL NotifyTpl,
+ IN EFI_EVENT_NOTIFY NotifyFunction, OPTIONAL
+ IN CONST VOID *NotifyContext, OPTIONAL
+ IN CONST EFI_GUID *EventGroup, OPTIONAL
+ OUT EFI_EVENT *Event
+ );
+
+#endif
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.inf b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.inf new file mode 100644 index 0000000..b694dd0 --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.inf @@ -0,0 +1,46 @@ +## @file
+# UEFI Boot Services Table Library for unit tests implementation.
+#
+# Copyright (c) Microsoft Corporation
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = UnitTestUefiBootServicesTableLib
+ MODULE_UNI_FILE = UefiBootServicesTableLibTest.uni
+ FILE_GUID = AA3A0651-89EB-4951-9D68-50F27360EBC2
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = UefiBootServicesTableLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER SMM_CORE
+
+ CONSTRUCTOR = UnitTestUefiBootServicesTableLibConstructor
+
+#
+# VALID_ARCHITECTURES = IA32 X64 EBC
+#
+
+[Sources]
+ UnitTestUefiBootServicesTableLib.h
+ UnitTestUefiBootServicesTableLib.c
+ UnitTestUefiBootServicesTableLibEventTimer.c
+ UnitTestUefiBootServicesTableLibImage.c
+ UnitTestUefiBootServicesTableLibMemory.c
+ UnitTestUefiBootServicesTableLibProtocol.h
+ UnitTestUefiBootServicesTableLibProtocol.c
+ UnitTestUefiBootServicesTableLibMisc.c
+ UnitTestUefiBootServicesTableLibTpl.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ MemoryAllocationLib
+ UnitTestLib
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ TimerExtra.uni
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.uni b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.uni new file mode 100644 index 0000000..1f742bb --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLib.uni @@ -0,0 +1,12 @@ +// /** @file
+// UEFI Boot Services Table Library for unit tests implementation.
+//
+// Copyright (c) Microsoft Corporation
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_MODULE_ABSTRACT #language en-US "UEFI Boot Services Table Library for unit tests"
+
+#string STR_MODULE_DESCRIPTION #language en-US "UEFI Boot Services Table Library for unit tests."
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibEventTimer.c b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibEventTimer.c new file mode 100644 index 0000000..dc02c4e --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibEventTimer.c @@ -0,0 +1,180 @@ +/** @file
+ Implementation of event and timer related services in the UEFI Boot Services table for use in unit tests.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "UnitTestUefiBootServicesTableLib.h"
+
+/**
+ Creates an event.
+
+ @param Type The type of event to create and its mode and
+ attributes
+ @param NotifyTpl The task priority level of event notifications
+ @param NotifyFunction Pointer to the events notification function
+ @param NotifyContext Pointer to the notification functions context
+ corresponds to parameter "Context" in the
+ notification function
+ @param Event Pointer to the newly created event if the call
+ succeeds undefined otherwise
+
+ @retval EFI_SUCCESS The event structure was created
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value
+ @retval EFI_OUT_OF_RESOURCES The event could not be allocated
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCreateEvent (
+ IN UINT32 Type,
+ IN EFI_TPL NotifyTpl,
+ IN EFI_EVENT_NOTIFY NotifyFunction, OPTIONAL
+ IN VOID *NotifyContext, OPTIONAL
+ OUT EFI_EVENT *Event
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Sets the type of timer and the trigger time for a timer event.
+
+ @param UserEvent The timer event that is to be signaled at the
+ specified time
+ @param Type The type of time that is specified in
+ TriggerTime
+ @param TriggerTime The number of 100ns units until the timer
+ expires
+
+ @retval EFI_SUCCESS The event has been set to be signaled at the
+ requested time
+ @retval EFI_INVALID_PARAMETER Event or Type is not valid
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestSetTimer (
+ IN EFI_EVENT UserEvent,
+ IN EFI_TIMER_DELAY Type,
+ IN UINT64 TriggerTime
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Stops execution until an event is signaled.
+
+ @param NumberOfEvents The number of events in the UserEvents array
+ @param UserEvents An array of EFI_EVENT
+ @param UserIndex Pointer to the index of the event which
+ satisfied the wait condition
+
+ @retval EFI_SUCCESS The event indicated by Index was signaled.
+ @retval EFI_INVALID_PARAMETER The event indicated by Index has a notification
+ function or Event was not a valid type
+ @retval EFI_UNSUPPORTED The current TPL is not TPL_APPLICATION
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestWaitForEvent (
+ IN UINTN NumberOfEvents,
+ IN EFI_EVENT *UserEvents,
+ OUT UINTN *UserIndex
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Signals the event. Queues the event to be notified if needed.
+
+ @param UserEvent The event to signal .
+
+ @retval EFI_INVALID_PARAMETER Parameters are not valid.
+ @retval EFI_SUCCESS The event was signaled.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestSignalEvent (
+ IN EFI_EVENT UserEvent
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Closes an event and frees the event structure.
+
+ @param UserEvent Event to close
+
+ @retval EFI_INVALID_PARAMETER Parameters are not valid.
+ @retval EFI_SUCCESS The event has been closed
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCloseEvent (
+ IN EFI_EVENT UserEvent
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Check the status of an event.
+
+ @param UserEvent The event to check
+
+ @retval EFI_SUCCESS The event is in the signaled state
+ @retval EFI_NOT_READY The event is not in the signaled state
+ @retval EFI_INVALID_PARAMETER Event is of type EVT_NOTIFY_SIGNAL
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCheckEvent (
+ IN EFI_EVENT UserEvent
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Creates an event in a group.
+
+ @param Type The type of event to create and its mode and
+ attributes
+ @param NotifyTpl The task priority level of event notifications
+ @param NotifyFunction Pointer to the events notification function
+ @param NotifyContext Pointer to the notification functions context
+ corresponds to parameter "Context" in the
+ notification function
+ @param EventGroup GUID for EventGroup if NULL act the same as
+ gBS->CreateEvent().
+ @param Event Pointer to the newly created event if the call
+ succeeds undefined otherwise
+
+ @retval EFI_SUCCESS The event structure was created
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value
+ @retval EFI_OUT_OF_RESOURCES The event could not be allocated
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCreateEventEx (
+ IN UINT32 Type,
+ IN EFI_TPL NotifyTpl,
+ IN EFI_EVENT_NOTIFY NotifyFunction, OPTIONAL
+ IN CONST VOID *NotifyContext, OPTIONAL
+ IN CONST EFI_GUID *EventGroup, OPTIONAL
+ OUT EFI_EVENT *Event
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibImage.c b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibImage.c new file mode 100644 index 0000000..144cc33 --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibImage.c @@ -0,0 +1,163 @@ +/** @file
+ Implementation of image related services in the UEFI Boot Services table for use in unit tests.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "UnitTestUefiBootServicesTableLib.h"
+
+/**
+ Loads an EFI image into memory and returns a handle to the image.
+
+ @param BootPolicy If TRUE, indicates that the request originates
+ from the boot manager, and that the boot
+ manager is attempting to load FilePath as a
+ boot selection.
+ @param ParentImageHandle The caller's image handle.
+ @param FilePath The specific file path from which the image is
+ loaded.
+ @param SourceBuffer If not NULL, a pointer to the memory location
+ containing a copy of the image to be loaded.
+ @param SourceSize The size in bytes of SourceBuffer.
+ @param ImageHandle Pointer to the returned image handle that is
+ created when the image is successfully loaded.
+
+ @retval EFI_SUCCESS The image was loaded into memory.
+ @retval EFI_NOT_FOUND The FilePath was not found.
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
+ @retval EFI_UNSUPPORTED The image type is not supported, or the device
+ path cannot be parsed to locate the proper
+ protocol for loading the file.
+ @retval EFI_OUT_OF_RESOURCES Image was not loaded due to insufficient
+ resources.
+ @retval EFI_LOAD_ERROR Image was not loaded because the image format was corrupt or not
+ understood.
+ @retval EFI_DEVICE_ERROR Image was not loaded because the device returned a read error.
+ @retval EFI_ACCESS_DENIED Image was not loaded because the platform policy prohibits the
+ image from being loaded. NULL is returned in *ImageHandle.
+ @retval EFI_SECURITY_VIOLATION Image was loaded and an ImageHandle was created with a
+ valid EFI_LOADED_IMAGE_PROTOCOL. However, the current
+ platform policy specifies that the image should not be started.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLoadImage (
+ IN BOOLEAN BootPolicy,
+ IN EFI_HANDLE ParentImageHandle,
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath,
+ IN VOID *SourceBuffer OPTIONAL,
+ IN UINTN SourceSize,
+ OUT EFI_HANDLE *ImageHandle
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Transfer control to a loaded image's entry point.
+
+ @param ImageHandle Handle of image to be started.
+ @param ExitDataSize Pointer of the size to ExitData
+ @param ExitData Pointer to a pointer to a data buffer that
+ includes a Null-terminated string,
+ optionally followed by additional binary data.
+ The string is a description that the caller may
+ use to further indicate the reason for the
+ image's exit.
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_OUT_OF_RESOURCES No enough buffer to allocate
+ @retval EFI_SECURITY_VIOLATION The current platform policy specifies that the image should not be started.
+ @retval EFI_SUCCESS Successfully transfer control to the image's
+ entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestStartImage (
+ IN EFI_HANDLE ImageHandle,
+ OUT UINTN *ExitDataSize,
+ OUT CHAR16 **ExitData OPTIONAL
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Terminates the currently loaded EFI image and returns control to boot services.
+
+ @param ImageHandle Handle that identifies the image. This
+ parameter is passed to the image on entry.
+ @param Status The image's exit code.
+ @param ExitDataSize The size, in bytes, of ExitData. Ignored if
+ ExitStatus is EFI_SUCCESS.
+ @param ExitData Pointer to a data buffer that includes a
+ Null-terminated Unicode string, optionally
+ followed by additional binary data. The string
+ is a description that the caller may use to
+ further indicate the reason for the image's
+ exit.
+
+ @retval EFI_INVALID_PARAMETER Image handle is NULL or it is not current
+ image.
+ @retval EFI_SUCCESS Successfully terminates the currently loaded
+ EFI image.
+ @retval EFI_ACCESS_DENIED Should never reach there.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate pool
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestExit (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_STATUS Status,
+ IN UINTN ExitDataSize,
+ IN CHAR16 *ExitData OPTIONAL
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Unloads an image.
+
+ @param ImageHandle Handle that identifies the image to be
+ unloaded.
+
+ @retval EFI_SUCCESS The image has been unloaded.
+ @retval EFI_UNSUPPORTED The image has been started, and does not support
+ unload.
+ @retval EFI_INVALID_PARAMPETER ImageHandle is not a valid image handle.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestUnloadImage (
+ IN EFI_HANDLE ImageHandle
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Terminates all boot services.
+
+ @param ImageHandle Handle that identifies the exiting image.
+ @param MapKey Key to the latest memory map.
+
+ @retval EFI_SUCCESS Boot Services terminated
+ @retval EFI_INVALID_PARAMETER MapKey is incorrect.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestExitBootServices (
+ IN EFI_HANDLE ImageHandle,
+ IN UINTN MapKey
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibMemory.c b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibMemory.c new file mode 100644 index 0000000..abbb129 --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibMemory.c @@ -0,0 +1,145 @@ +/** @file
+ Implementation of memory related services in the UEFI Boot Services table for use in unit tests.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "UnitTestUefiBootServicesTableLib.h"
+
+/**
+ Allocates pages from the memory map.
+
+ @param Type The type of allocation to perform
+ @param MemoryType The type of memory to turn the allocated pages
+ into
+ @param NumberOfPages The number of pages to allocate
+ @param Memory A pointer to receive the base allocated memory
+ address
+
+ @return Status. On success, Memory is filled in with the base address allocated
+ @retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in
+ spec.
+ @retval EFI_NOT_FOUND Could not allocate pages match the requirement.
+ @retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
+ @retval EFI_SUCCESS Pages successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestAllocatePages (
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN NumberOfPages,
+ IN OUT EFI_PHYSICAL_ADDRESS *Memory
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Frees previous allocated pages.
+
+ @param Memory Base address of memory being freed
+ @param NumberOfPages The number of pages to free
+
+ @retval EFI_NOT_FOUND Could not find the entry that covers the range
+ @retval EFI_INVALID_PARAMETER Address not aligned
+ @return EFI_SUCCESS -Pages successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestFreePages (
+ IN EFI_PHYSICAL_ADDRESS Memory,
+ IN UINTN NumberOfPages
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ This function returns a copy of the current memory map. The map is an array of
+ memory descriptors, each of which describes a contiguous block of memory.
+
+ @param MemoryMapSize A pointer to the size, in bytes, of the
+ MemoryMap buffer. On input, this is the size of
+ the buffer allocated by the caller. On output,
+ it is the size of the buffer returned by the
+ firmware if the buffer was large enough, or the
+ size of the buffer needed to contain the map if
+ the buffer was too small.
+ @param MemoryMap A pointer to the buffer in which firmware places
+ the current memory map.
+ @param MapKey A pointer to the location in which firmware
+ returns the key for the current memory map.
+ @param DescriptorSize A pointer to the location in which firmware
+ returns the size, in bytes, of an individual
+ EFI_MEMORY_DESCRIPTOR.
+ @param DescriptorVersion A pointer to the location in which firmware
+ returns the version number associated with the
+ EFI_MEMORY_DESCRIPTOR.
+
+ @retval EFI_SUCCESS The memory map was returned in the MemoryMap
+ buffer.
+ @retval EFI_BUFFER_TOO_SMALL The MemoryMap buffer was too small. The current
+ buffer size needed to hold the memory map is
+ returned in MemoryMapSize.
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestGetMemoryMap (
+ IN OUT UINTN *MemoryMapSize,
+ IN OUT EFI_MEMORY_DESCRIPTOR *MemoryMap,
+ OUT UINTN *MapKey,
+ OUT UINTN *DescriptorSize,
+ OUT UINT32 *DescriptorVersion
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Allocate pool of a particular type.
+
+ @param PoolType Type of pool to allocate
+ @param Size The amount of pool to allocate
+ @param Buffer The address to return a pointer to the allocated
+ pool
+
+ @retval EFI_INVALID_PARAMETER PoolType not valid or Buffer is NULL
+ @retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
+ @retval EFI_SUCCESS Pool successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestAllocatePool (
+ IN EFI_MEMORY_TYPE PoolType,
+ IN UINTN Size,
+ OUT VOID **Buffer
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Frees pool.
+
+ @param Buffer The allocated pool entry to free
+
+ @retval EFI_INVALID_PARAMETER Buffer is not a valid value.
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestFreePool (
+ IN VOID *Buffer
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibMisc.c b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibMisc.c new file mode 100644 index 0000000..121496b --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibMisc.c @@ -0,0 +1,198 @@ +/** @file
+ Implementation of miscellaneous services in the UEFI Boot Services table for use in unit tests.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "UnitTestUefiBootServicesTableLib.h"
+
+/**
+ Returns a monotonically increasing count for the platform.
+
+ @param[out] Count The pointer to returned value.
+
+ @retval EFI_SUCCESS The next monotonic count was returned.
+ @retval EFI_INVALID_PARAMETER Count is NULL.
+ @retval EFI_DEVICE_ERROR The device is not functioning properly.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestGetNextMonotonicCount (
+ OUT UINT64 *Count
+ )
+{
+ STATIC UINT64 StaticCount = 0;
+
+ *Count = StaticCount++;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Introduces a fine-grained stall.
+
+ @param Microseconds The number of microseconds to stall execution.
+
+ @retval EFI_SUCCESS Execution was stalled for at least the requested
+ amount of microseconds.
+ @retval EFI_NOT_AVAILABLE_YET gMetronome is not available yet
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestStall (
+ IN UINTN Microseconds
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Sets the system's watchdog timer.
+
+ @param Timeout The number of seconds to set the watchdog timer to.
+ A value of zero disables the timer.
+ @param WatchdogCode The numeric code to log on a watchdog timer timeout
+ event. The firmware reserves codes 0x0000 to 0xFFFF.
+ Loaders and operating systems may use other timeout
+ codes.
+ @param DataSize The size, in bytes, of WatchdogData.
+ @param WatchdogData A data buffer that includes a Null-terminated Unicode
+ string, optionally followed by additional binary data.
+ The string is a description that the call may use to
+ further indicate the reason to be logged with a
+ watchdog event.
+
+ @return EFI_SUCCESS Timeout has been set
+ @return EFI_NOT_AVAILABLE_YET WatchdogTimer is not available yet
+ @return EFI_UNSUPPORTED System does not have a timer (currently not used)
+ @return EFI_DEVICE_ERROR Could not complete due to hardware error
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestSetWatchdogTimer (
+ IN UINTN Timeout,
+ IN UINT64 WatchdogCode,
+ IN UINTN DataSize,
+ IN CHAR16 *WatchdogData OPTIONAL
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Connects one or more drivers to a controller.
+
+ @param ControllerHandle The handle of the controller to which driver(s) are to be connected.
+ @param DriverImageHandle A pointer to an ordered list handles that support the
+ EFI_DRIVER_BINDING_PROTOCOL.
+ @param RemainingDevicePath A pointer to the device path that specifies a child of the
+ controller specified by ControllerHandle.
+ @param Recursive If TRUE, then ConnectController() is called recursively
+ until the entire tree of controllers below the controller specified
+ by ControllerHandle have been created. If FALSE, then
+ the tree of controllers is only expanded one level.
+
+ @retval EFI_SUCCESS 1) One or more drivers were connected to ControllerHandle.
+ 2) No drivers were connected to ControllerHandle, but
+ RemainingDevicePath is not NULL, and it is an End Device
+ Path Node.
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+ @retval EFI_NOT_FOUND 1) There are no EFI_DRIVER_BINDING_PROTOCOL instances
+ present in the system.
+ 2) No drivers were connected to ControllerHandle.
+ @retval EFI_SECURITY_VIOLATION
+ The user has no permission to start UEFI device drivers on the device path
+ associated with the ControllerHandle or specified by the RemainingDevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestConnectController (
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE *DriverImageHandle OPTIONAL,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL,
+ IN BOOLEAN Recursive
+ )
+{
+ return EFI_SUCCESS; // Return success for now
+}
+
+/**
+ Disconnects a controller from a driver
+
+ @param ControllerHandle ControllerHandle The handle of
+ the controller from which
+ driver(s) are to be
+ disconnected.
+ @param DriverImageHandle DriverImageHandle The driver to
+ disconnect from ControllerHandle.
+ @param ChildHandle ChildHandle The handle of the
+ child to destroy.
+
+ @retval EFI_SUCCESS One or more drivers were
+ disconnected from the controller.
+ @retval EFI_SUCCESS On entry, no drivers are managing
+ ControllerHandle.
+ @retval EFI_SUCCESS DriverImageHandle is not NULL,
+ and on entry DriverImageHandle is
+ not managing ControllerHandle.
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+ @retval EFI_INVALID_PARAMETER DriverImageHandle is not NULL,
+ and it is not a valid EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL, and it
+ is not a valid EFI_HANDLE.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources
+ available to disconnect any
+ drivers from ControllerHandle.
+ @retval EFI_DEVICE_ERROR The controller could not be
+ disconnected because of a device
+ error.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestDisconnectController (
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE DriverImageHandle OPTIONAL,
+ IN EFI_HANDLE ChildHandle OPTIONAL
+ )
+{
+ return EFI_SUCCESS; // Return success for now
+}
+
+/**
+ Computes and returns a 32-bit CRC for a data buffer.
+
+ @param[in] Data A pointer to the buffer on which the 32-bit CRC is to be computed.
+ @param[in] DataSize The number of bytes in the buffer Data.
+ @param[out] Crc32 The 32-bit CRC that was computed for the data buffer specified by Data
+ and DataSize.
+
+ @retval EFI_SUCCESS The 32-bit CRC was computed for the data buffer and returned in
+ Crc32.
+ @retval EFI_INVALID_PARAMETER Data is NULL.
+ @retval EFI_INVALID_PARAMETER Crc32 is NULL.
+ @retval EFI_INVALID_PARAMETER DataSize is 0.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCalculateCrc32 (
+ IN VOID *Data,
+ IN UINTN DataSize,
+ OUT UINT32 *Crc32
+ )
+{
+ if ((Data == NULL) || (Crc32 == NULL) || (DataSize == 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *Crc32 = CalculateCrc32 (Data, DataSize);
+
+ return EFI_SUCCESS;
+}
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibProtocol.c b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibProtocol.c new file mode 100644 index 0000000..437082d --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibProtocol.c @@ -0,0 +1,1650 @@ +/** @file
+ Implementation of protocol related services in the UEFI Boot Services table for use in unit tests.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "UnitTestUefiBootServicesTableLibProtocol.h"
+
+STATIC LIST_ENTRY mProtocolDatabase = INITIALIZE_LIST_HEAD_VARIABLE (mProtocolDatabase);
+STATIC LIST_ENTRY gHandleList = INITIALIZE_LIST_HEAD_VARIABLE (gHandleList);
+STATIC UINT64 gHandleDatabaseKey = 0;
+STATIC UINTN mEfiLocateHandleRequest = 0;
+
+//
+// Helper Functions
+//
+
+/**
+ Check whether a handle is a valid EFI_HANDLE
+
+ @param UserHandle The handle to check
+
+ @retval EFI_INVALID_PARAMETER The handle is NULL or not a valid EFI_HANDLE.
+ @retval EFI_SUCCESS The handle is valid EFI_HANDLE.
+
+**/
+EFI_STATUS
+UnitTestValidateHandle (
+ IN EFI_HANDLE UserHandle
+ )
+{
+ IHANDLE *Handle;
+ LIST_ENTRY *Link;
+
+ if (UserHandle == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ for (Link = gHandleList.BackLink; Link != &gHandleList; Link = Link->BackLink) {
+ Handle = CR (Link, IHANDLE, AllHandles, EFI_HANDLE_SIGNATURE);
+ if (Handle == (IHANDLE *)UserHandle) {
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_INVALID_PARAMETER;
+}
+
+/**
+ Finds the protocol entry for the requested protocol.
+
+ @param Protocol The ID of the protocol
+ @param Create Create a new entry if not found
+
+ @return Protocol entry
+
+**/
+PROTOCOL_ENTRY *
+UnitTestFindProtocolEntry (
+ IN EFI_GUID *Protocol,
+ IN BOOLEAN Create
+ )
+{
+ LIST_ENTRY *Link;
+ PROTOCOL_ENTRY *Item;
+ PROTOCOL_ENTRY *ProtEntry;
+
+ //
+ // Search the database for the matching GUID
+ //
+
+ ProtEntry = NULL;
+ for (Link = mProtocolDatabase.ForwardLink;
+ Link != &mProtocolDatabase;
+ Link = Link->ForwardLink)
+ {
+ Item = CR (Link, PROTOCOL_ENTRY, AllEntries, PROTOCOL_ENTRY_SIGNATURE);
+ if (CompareGuid (&Item->ProtocolID, Protocol)) {
+ //
+ // This is the protocol entry
+ //
+
+ ProtEntry = Item;
+ break;
+ }
+ }
+
+ //
+ // If the protocol entry was not found and Create is TRUE, then
+ // allocate a new entry
+ //
+ if ((ProtEntry == NULL) && Create) {
+ ProtEntry = AllocatePool (sizeof (PROTOCOL_ENTRY));
+
+ if (ProtEntry != NULL) {
+ //
+ // Initialize new protocol entry structure
+ //
+ ProtEntry->Signature = PROTOCOL_ENTRY_SIGNATURE;
+ CopyGuid ((VOID *)&ProtEntry->ProtocolID, Protocol);
+ InitializeListHead (&ProtEntry->Protocols);
+ InitializeListHead (&ProtEntry->Notify);
+
+ //
+ // Add it to protocol database
+ //
+ InsertTailList (&mProtocolDatabase, &ProtEntry->AllEntries);
+ }
+ }
+
+ return ProtEntry;
+}
+
+/**
+ Finds the protocol instance for the requested handle and protocol.
+ Note: This function doesn't do parameters checking, it's caller's responsibility
+ to pass in valid parameters.
+
+ @param Handle The handle to search the protocol on
+ @param Protocol GUID of the protocol
+ @param Interface The interface for the protocol being searched
+
+ @return Protocol instance (NULL: Not found)
+
+**/
+PROTOCOL_INTERFACE *
+UnitTestFindProtocolInterface (
+ IN IHANDLE *Handle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ )
+{
+ PROTOCOL_INTERFACE *Prot;
+ PROTOCOL_ENTRY *ProtEntry;
+ LIST_ENTRY *Link;
+
+ Prot = NULL;
+
+ //
+ // Lookup the protocol entry for this protocol ID
+ //
+
+ ProtEntry = UnitTestFindProtocolEntry (Protocol, FALSE);
+ if (ProtEntry != NULL) {
+ //
+ // Look at each protocol interface for any matches
+ //
+ for (Link = Handle->Protocols.ForwardLink; Link != &Handle->Protocols; Link = Link->ForwardLink) {
+ //
+ // If this protocol interface matches, remove it
+ //
+ Prot = CR (Link, PROTOCOL_INTERFACE, Link, PROTOCOL_INTERFACE_SIGNATURE);
+ if ((Prot->Interface == Interface) && (Prot->Protocol == ProtEntry)) {
+ break;
+ }
+
+ Prot = NULL;
+ }
+ }
+
+ return Prot;
+}
+
+/**
+ Signal event for every protocol in protocol entry.
+
+ @param ProtEntry Protocol entry
+
+**/
+VOID
+UnitTestNotifyProtocolEntry (
+ IN PROTOCOL_ENTRY *ProtEntry
+ )
+{
+ PROTOCOL_NOTIFY *ProtNotify;
+ LIST_ENTRY *Link;
+
+ for (Link = ProtEntry->Notify.ForwardLink; Link != &ProtEntry->Notify; Link = Link->ForwardLink) {
+ ProtNotify = CR (Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
+ UnitTestSignalEvent (ProtNotify->Event);
+ }
+}
+
+/**
+ Routine to get the next Handle, when you are searching for all handles.
+
+ @param Position Information about which Handle to seach for.
+ @param Interface Return the interface structure for the matching
+ protocol.
+
+ @return An pointer to IHANDLE if the next Position is not the end of the list.
+ Otherwise,NULL is returned.
+
+**/
+IHANDLE *
+UnitTestGetNextLocateAllHandles (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ )
+{
+ IHANDLE *Handle;
+
+ //
+ // Next handle
+ //
+ Position->Position = Position->Position->ForwardLink;
+
+ //
+ // If not at the end of the list, get the handle
+ //
+ Handle = NULL;
+ *Interface = NULL;
+ if (Position->Position != &gHandleList) {
+ Handle = CR (Position->Position, IHANDLE, AllHandles, EFI_HANDLE_SIGNATURE);
+ }
+
+ return Handle;
+}
+
+/**
+ Routine to get the next Handle, when you are searching for register protocol
+ notifies.
+
+ @param Position Information about which Handle to seach for.
+ @param Interface Return the interface structure for the matching
+ protocol.
+
+ @return An pointer to IHANDLE if the next Position is not the end of the list.
+ Otherwise,NULL is returned.
+
+**/
+IHANDLE *
+UnitTestGetNextLocateByRegisterNotify (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ )
+{
+ IHANDLE *Handle;
+ PROTOCOL_NOTIFY *ProtNotify;
+ PROTOCOL_INTERFACE *Prot;
+ LIST_ENTRY *Link;
+
+ Handle = NULL;
+ *Interface = NULL;
+ ProtNotify = Position->SearchKey;
+
+ //
+ // If this is the first request, get the next handle
+ //
+ if (ProtNotify != NULL) {
+ ASSERT (ProtNotify->Signature == PROTOCOL_NOTIFY_SIGNATURE);
+ Position->SearchKey = NULL;
+
+ //
+ // If not at the end of the list, get the next handle
+ //
+ Link = ProtNotify->Position->ForwardLink;
+ if (Link != &ProtNotify->Protocol->Protocols) {
+ Prot = CR (Link, PROTOCOL_INTERFACE, ByProtocol, PROTOCOL_INTERFACE_SIGNATURE);
+ Handle = Prot->Handle;
+ *Interface = Prot->Interface;
+ }
+ }
+
+ return Handle;
+}
+
+/**
+ Routine to get the next Handle, when you are searching for a given protocol.
+
+ @param Position Information about which Handle to seach for.
+ @param Interface Return the interface structure for the matching
+ protocol.
+
+ @return An pointer to IHANDLE if the next Position is not the end of the list.
+ Otherwise,NULL is returned.
+
+**/
+IHANDLE *
+UnitTestGetNextLocateByProtocol (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ )
+{
+ IHANDLE *Handle;
+ LIST_ENTRY *Link;
+ PROTOCOL_INTERFACE *Prot;
+
+ Handle = NULL;
+ *Interface = NULL;
+ for ( ; ;) {
+ //
+ // Next entry
+ //
+ Link = Position->Position->ForwardLink;
+ Position->Position = Link;
+
+ //
+ // If not at the end, return the handle
+ //
+ if (Link == &Position->ProtEntry->Protocols) {
+ Handle = NULL;
+ break;
+ }
+
+ //
+ // Get the handle
+ //
+ Prot = CR (Link, PROTOCOL_INTERFACE, ByProtocol, PROTOCOL_INTERFACE_SIGNATURE);
+ Handle = Prot->Handle;
+ *Interface = Prot->Interface;
+
+ //
+ // If this handle has not been returned this request, then
+ // return it now
+ //
+ if (Handle->LocateRequest != mEfiLocateHandleRequest) {
+ Handle->LocateRequest = mEfiLocateHandleRequest;
+ break;
+ }
+ }
+
+ return Handle;
+}
+
+/**
+ Attempts to disconnect all drivers that are using the protocol interface being queried.
+ If failed, reconnect all drivers disconnected.
+ Note: This function doesn't do parameters checking, it's caller's responsibility
+ to pass in valid parameters.
+
+ @param UserHandle The handle on which the protocol is installed
+ @param Prot The protocol to disconnect drivers from
+
+ @retval EFI_SUCCESS Drivers using the protocol interface are all
+ disconnected
+ @retval EFI_ACCESS_DENIED Failed to disconnect one or all of the drivers
+
+**/
+EFI_STATUS
+UnitTestDisconnectControllersUsingProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN PROTOCOL_INTERFACE *Prot
+ )
+{
+ EFI_STATUS Status;
+ BOOLEAN ItemFound;
+ LIST_ENTRY *Link;
+ OPEN_PROTOCOL_DATA *OpenData;
+
+ Status = EFI_SUCCESS;
+
+ //
+ // Attempt to disconnect all drivers from this protocol interface
+ //
+ do {
+ ItemFound = FALSE;
+ for (Link = Prot->OpenList.ForwardLink; Link != &Prot->OpenList; Link = Link->ForwardLink) {
+ OpenData = CR (Link, OPEN_PROTOCOL_DATA, Link, OPEN_PROTOCOL_DATA_SIGNATURE);
+ if ((OpenData->Attributes & EFI_OPEN_PROTOCOL_BY_DRIVER) != 0) {
+ Status = UnitTestDisconnectController (UserHandle, OpenData->AgentHandle, NULL);
+ if (!EFI_ERROR (Status)) {
+ ItemFound = TRUE;
+ }
+
+ break;
+ }
+ }
+ } while (ItemFound);
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // Attempt to remove BY_HANDLE_PROTOCOL and GET_PROTOCOL and TEST_PROTOCOL Open List items
+ //
+ for (Link = Prot->OpenList.ForwardLink; Link != &Prot->OpenList;) {
+ OpenData = CR (Link, OPEN_PROTOCOL_DATA, Link, OPEN_PROTOCOL_DATA_SIGNATURE);
+ if ((OpenData->Attributes &
+ (EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL | EFI_OPEN_PROTOCOL_GET_PROTOCOL | EFI_OPEN_PROTOCOL_TEST_PROTOCOL)) != 0)
+ {
+ Link = RemoveEntryList (&OpenData->Link);
+ Prot->OpenListCount--;
+ FreePool (OpenData);
+ } else {
+ Link = Link->ForwardLink;
+ }
+ }
+ }
+
+ //
+ // If there are errors or still has open items in the list, then reconnect all the drivers and return an error
+ //
+ if (EFI_ERROR (Status) || (Prot->OpenListCount > 0)) {
+ UnitTestConnectController (UserHandle, NULL, NULL, TRUE);
+ Status = EFI_ACCESS_DENIED;
+ }
+
+ return Status;
+}
+
+/**
+ Removes Protocol from the protocol list (but not the handle list).
+
+ @param Handle The handle to remove protocol on.
+ @param Protocol GUID of the protocol to be moved
+ @param Interface The interface of the protocol
+
+ @return Protocol Entry
+
+**/
+PROTOCOL_INTERFACE *
+UnitTestRemoveInterfaceFromProtocol (
+ IN IHANDLE *Handle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ )
+{
+ PROTOCOL_INTERFACE *Prot;
+ PROTOCOL_NOTIFY *ProtNotify;
+ PROTOCOL_ENTRY *ProtEntry;
+ LIST_ENTRY *Link;
+
+ Prot = UnitTestFindProtocolInterface (Handle, Protocol, Interface);
+ if (Prot != NULL) {
+ ProtEntry = Prot->Protocol;
+
+ //
+ // If there's a protocol notify location pointing to this entry, back it up one
+ //
+ for (Link = ProtEntry->Notify.ForwardLink; Link != &ProtEntry->Notify; Link = Link->ForwardLink) {
+ ProtNotify = CR (Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
+
+ if (ProtNotify->Position == &Prot->ByProtocol) {
+ ProtNotify->Position = Prot->ByProtocol.BackLink;
+ }
+ }
+
+ //
+ // Remove the protocol interface entry
+ //
+ RemoveEntryList (&Prot->ByProtocol);
+ }
+
+ return Prot;
+}
+
+//
+// Boot Services Function Implementation
+//
+
+/**
+ Locate a certain GUID protocol interface in a Handle's protocols.
+
+ @param UserHandle The handle to obtain the protocol interface on
+ @param Protocol The GUID of the protocol
+
+ @return The requested protocol interface for the handle
+
+**/
+PROTOCOL_INTERFACE *
+UnitTestGetProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol
+ )
+{
+ EFI_STATUS Status;
+ PROTOCOL_ENTRY *ProtEntry;
+ PROTOCOL_INTERFACE *Prot;
+ IHANDLE *Handle;
+ LIST_ENTRY *Link;
+
+ Status = UnitTestValidateHandle (UserHandle);
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+
+ Handle = (IHANDLE *)UserHandle;
+
+ //
+ // Look at each protocol interface for a match
+ //
+ for (Link = Handle->Protocols.ForwardLink; Link != &Handle->Protocols; Link = Link->ForwardLink) {
+ Prot = CR (Link, PROTOCOL_INTERFACE, Link, PROTOCOL_INTERFACE_SIGNATURE);
+ ProtEntry = Prot->Protocol;
+ if (CompareGuid (&ProtEntry->ProtocolID, Protocol)) {
+ return Prot;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ Installs a protocol interface into the boot services environment.
+
+ @param UserHandle The handle to install the protocol handler on,
+ or NULL if a new handle is to be allocated
+ @param Protocol The protocol to add to the handle
+ @param InterfaceType Indicates whether Interface is supplied in
+ native form.
+ @param Interface The interface for the protocol being added
+ @param Notify indicates whether notify the notification list
+ for this protocol
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_OUT_OF_RESOURCES No enough buffer to allocate
+ @retval EFI_SUCCESS Protocol interface successfully installed
+
+**/
+EFI_STATUS
+UnitTestInstallProtocolInterfaceNotify (
+ IN OUT EFI_HANDLE *UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_INTERFACE_TYPE InterfaceType,
+ IN VOID *Interface,
+ IN BOOLEAN Notify
+ )
+{
+ PROTOCOL_INTERFACE *Prot;
+ PROTOCOL_ENTRY *ProtEntry;
+ IHANDLE *Handle;
+ EFI_STATUS Status;
+ VOID *ExistingInterface;
+
+ //
+ // returns EFI_INVALID_PARAMETER if InterfaceType is invalid.
+ // Also added check for invalid UserHandle and Protocol pointers.
+ //
+ if ((UserHandle == NULL) || (Protocol == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (InterfaceType != EFI_NATIVE_INTERFACE) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Print debug message
+ //
+ UT_LOG_INFO ("InstallProtocolInterface: %g %p\n", Protocol, Interface);
+
+ Status = EFI_OUT_OF_RESOURCES;
+ Prot = NULL;
+ Handle = NULL;
+
+ if (*UserHandle != NULL) {
+ Status = UnitTestHandleProtocol (*UserHandle, Protocol, (VOID **)&ExistingInterface);
+ if (!EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Lookup the Protocol Entry for the requested protocol
+ //
+ ProtEntry = UnitTestFindProtocolEntry (Protocol, TRUE);
+ if (ProtEntry == NULL) {
+ goto Done;
+ }
+
+ //
+ // Allocate a new protocol interface structure
+ //
+ Prot = AllocateZeroPool (sizeof (PROTOCOL_INTERFACE));
+ if (Prot == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // If caller didn't supply a handle, allocate a new one
+ //
+ Handle = (IHANDLE *)*UserHandle;
+ if (Handle == NULL) {
+ Handle = AllocateZeroPool (sizeof (IHANDLE));
+ if (Handle == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // Initialize new handler structure
+ //
+ Handle->Signature = EFI_HANDLE_SIGNATURE;
+ InitializeListHead (&Handle->Protocols);
+
+ //
+ // Initialize the Key to show that the handle has been created/modified
+ //
+ gHandleDatabaseKey++;
+ Handle->Key = gHandleDatabaseKey;
+
+ //
+ // Add this handle to the list global list of all handles
+ // in the system
+ //
+ InsertTailList (&gHandleList, &Handle->AllHandles);
+ } else {
+ Status = UnitTestValidateHandle (Handle);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "InstallProtocolInterface: input handle at 0x%x is invalid\n", Handle));
+ goto Done;
+ }
+ }
+
+ //
+ // Each interface that is added must be unique
+ //
+ ASSERT (UnitTestFindProtocolInterface (Handle, Protocol, Interface) == NULL);
+
+ //
+ // Initialize the protocol interface structure
+ //
+ Prot->Signature = PROTOCOL_INTERFACE_SIGNATURE;
+ Prot->Handle = Handle;
+ Prot->Protocol = ProtEntry;
+ Prot->Interface = Interface;
+
+ //
+ // Initialize OpenProtocol Data base
+ //
+ InitializeListHead (&Prot->OpenList);
+ Prot->OpenListCount = 0;
+
+ //
+ // Add this protocol interface to the head of the supported
+ // protocol list for this handle
+ //
+ InsertHeadList (&Handle->Protocols, &Prot->Link);
+
+ //
+ // Add this protocol interface to the tail of the
+ // protocol entry
+ //
+ InsertTailList (&ProtEntry->Protocols, &Prot->ByProtocol);
+
+ //
+ // Notify the notification list for this protocol
+ //
+ if (Notify) {
+ UnitTestNotifyProtocolEntry (ProtEntry);
+ }
+
+ Status = EFI_SUCCESS;
+
+Done:
+ if (!EFI_ERROR (Status)) {
+ //
+ // Return the new handle back to the caller
+ //
+ *UserHandle = Handle;
+ } else {
+ //
+ // There was an error, clean up
+ //
+ if (Prot != NULL) {
+ UnitTestFreePool (Prot);
+ }
+
+ DEBUG ((DEBUG_ERROR, "InstallProtocolInterface: %g %p failed with %r\n", Protocol, Interface, Status));
+ }
+
+ return Status;
+}
+
+/**
+ Wrapper function to UnitTestInstallProtocolInterfaceNotify. This is the public API which
+ Calls the private one which contains a BOOLEAN parameter for notifications
+
+ @param UserHandle The handle to install the protocol handler on,
+ or NULL if a new handle is to be allocated
+ @param Protocol The protocol to add to the handle
+ @param InterfaceType Indicates whether Interface is supplied in
+ native form.
+ @param Interface The interface for the protocol being added
+
+ @return Status code
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestInstallProtocolInterface (
+ IN OUT EFI_HANDLE *UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_INTERFACE_TYPE InterfaceType,
+ IN VOID *Interface
+ )
+{
+ return UnitTestInstallProtocolInterfaceNotify (
+ UserHandle,
+ Protocol,
+ InterfaceType,
+ Interface,
+ TRUE
+ );
+}
+
+/**
+ Reinstall a protocol interface on a device handle. The OldInterface for Protocol is replaced by the NewInterface.
+
+ @param UserHandle Handle on which the interface is to be
+ reinstalled
+ @param Protocol The numeric ID of the interface
+ @param OldInterface A pointer to the old interface
+ @param NewInterface A pointer to the new interface
+
+ @retval EFI_SUCCESS The protocol interface was installed
+ @retval EFI_NOT_FOUND The OldInterface on the handle was not found
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestReinstallProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN VOID *OldInterface,
+ IN VOID *NewInterface
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Uninstalls all instances of a protocol:interfacer from a handle.
+ If the last protocol interface is remove from the handle, the
+ handle is freed.
+
+ @param UserHandle The handle to remove the protocol handler from
+ @param Protocol The protocol, of protocol:interface, to remove
+ @param Interface The interface, of protocol:interface, to remove
+
+ @retval EFI_INVALID_PARAMETER Protocol is NULL.
+ @retval EFI_SUCCESS Protocol interface successfully uninstalled.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestUninstallProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ )
+{
+ EFI_STATUS Status;
+ IHANDLE *Handle;
+ PROTOCOL_INTERFACE *Prot;
+
+ //
+ // Check that Protocol is valid
+ //
+ if (Protocol == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check that UserHandle is a valid handle
+ //
+ Status = UnitTestValidateHandle (UserHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Check that Protocol exists on UserHandle, and Interface matches the interface in the database
+ //
+ Prot = UnitTestFindProtocolInterface (UserHandle, Protocol, Interface);
+ if (Prot == NULL) {
+ Status = EFI_NOT_FOUND;
+ goto Done;
+ }
+
+ //
+ // Attempt to disconnect all drivers that are using the protocol interface that is about to be removed
+ //
+ Status = UnitTestDisconnectControllersUsingProtocolInterface (
+ UserHandle,
+ Prot
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // One or more drivers refused to release, so return the error
+ //
+ goto Done;
+ }
+
+ //
+ // Remove the protocol interface from the protocol
+ //
+ Status = EFI_NOT_FOUND;
+ Handle = (IHANDLE *)UserHandle;
+ Prot = UnitTestRemoveInterfaceFromProtocol (Handle, Protocol, Interface);
+
+ if (Prot != NULL) {
+ //
+ // Update the Key to show that the handle has been created/modified
+ //
+ gHandleDatabaseKey++;
+ Handle->Key = gHandleDatabaseKey;
+
+ //
+ // Remove the protocol interface from the handle
+ //
+ RemoveEntryList (&Prot->Link);
+
+ //
+ // Free the memory
+ //
+ Prot->Signature = 0;
+ FreePool (Prot);
+ Status = EFI_SUCCESS;
+ }
+
+ //
+ // If there are no more handlers for the handle, free the handle
+ //
+ if (IsListEmpty (&Handle->Protocols)) {
+ Handle->Signature = 0;
+ RemoveEntryList (&Handle->AllHandles);
+ FreePool (Handle);
+ }
+
+Done:
+ return Status;
+}
+
+/**
+ Queries a handle to determine if it supports a specified protocol.
+
+ @param UserHandle The handle being queried.
+ @param Protocol The published unique identifier of the protocol.
+ @param Interface Supplies the address where a pointer to the
+ corresponding Protocol Interface is returned.
+
+ @return The requested protocol interface for the handle
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestHandleProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT VOID **Interface
+ )
+{
+ return UnitTestOpenProtocol (
+ UserHandle,
+ Protocol,
+ Interface,
+ gImageHandle,
+ NULL,
+ EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL
+ );
+}
+
+/**
+ Add a new protocol notification record for the request protocol.
+
+ @param Protocol The requested protocol to add the notify
+ registration
+ @param Event The event to signal
+ @param Registration Returns the registration record
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_SUCCESS Successfully returned the registration record
+ that has been added
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestRegisterProtocolNotify (
+ IN EFI_GUID *Protocol,
+ IN EFI_EVENT Event,
+ OUT VOID **Registration
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Locates the requested handle(s) and returns them in Buffer.
+
+ @param SearchType The type of search to perform to locate the
+ handles
+ @param Protocol The protocol to search for
+ @param SearchKey Dependant on SearchType
+ @param BufferSize On input the size of Buffer. On output the
+ size of data returned.
+ @param Buffer The buffer to return the results in
+
+ @retval EFI_BUFFER_TOO_SMALL Buffer too small, required buffer size is
+ returned in BufferSize.
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_SUCCESS Successfully found the requested handle(s) and
+ returns them in Buffer.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateHandle (
+ IN EFI_LOCATE_SEARCH_TYPE SearchType,
+ IN EFI_GUID *Protocol OPTIONAL,
+ IN VOID *SearchKey OPTIONAL,
+ IN OUT UINTN *BufferSize,
+ OUT EFI_HANDLE *Buffer
+ )
+{
+ EFI_STATUS Status;
+ LOCATE_POSITION Position;
+ PROTOCOL_NOTIFY *ProtNotify;
+ UNIT_TEST_GET_NEXT GetNext;
+ UINTN ResultSize;
+ IHANDLE *Handle;
+ IHANDLE **ResultBuffer;
+ VOID *Interface;
+
+ if (BufferSize == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*BufferSize > 0) && (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ GetNext = NULL;
+
+ //
+ // Set initial position
+ //
+ Position.Protocol = Protocol;
+ Position.SearchKey = SearchKey;
+ Position.Position = &gHandleList;
+
+ ResultSize = 0;
+ ResultBuffer = (IHANDLE **)Buffer;
+ Status = EFI_SUCCESS;
+
+ //
+ // Get the search function based on type
+ //
+ switch (SearchType) {
+ case AllHandles:
+ GetNext = UnitTestGetNextLocateAllHandles;
+ break;
+
+ case ByRegisterNotify:
+ //
+ // Must have SearchKey for locate ByRegisterNotify
+ //
+ if (SearchKey == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ GetNext = UnitTestGetNextLocateByRegisterNotify;
+ break;
+
+ case ByProtocol:
+ GetNext = UnitTestGetNextLocateByProtocol;
+ if (Protocol == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ //
+ // Look up the protocol entry and set the head pointer
+ //
+ Position.ProtEntry = UnitTestFindProtocolEntry (Protocol, FALSE);
+ if (Position.ProtEntry == NULL) {
+ Status = EFI_NOT_FOUND;
+ break;
+ }
+
+ Position.Position = &Position.ProtEntry->Protocols;
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ ASSERT (GetNext != NULL);
+ //
+ // Enumerate out the matching handles
+ //
+ mEfiLocateHandleRequest += 1;
+ for ( ; ;) {
+ //
+ // Get the next handle. If no more handles, stop
+ //
+ Handle = GetNext (&Position, &Interface);
+ if (NULL == Handle) {
+ break;
+ }
+
+ //
+ // Increase the resulting buffer size, and if this handle
+ // fits return it
+ //
+ ResultSize += sizeof (Handle);
+ if (ResultSize <= *BufferSize) {
+ *ResultBuffer = Handle;
+ ResultBuffer += 1;
+ }
+ }
+
+ //
+ // If the result is a zero length buffer, then there were no
+ // matching handles
+ //
+ if (ResultSize == 0) {
+ Status = EFI_NOT_FOUND;
+ } else {
+ //
+ // Return the resulting buffer size. If it's larger than what
+ // was passed, then set the error code
+ //
+ if (ResultSize > *BufferSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ }
+
+ *BufferSize = ResultSize;
+
+ if ((SearchType == ByRegisterNotify) && !EFI_ERROR (Status)) {
+ //
+ // If this is a search by register notify and a handle was
+ // returned, update the register notification position
+ //
+ ASSERT (SearchKey != NULL);
+ ProtNotify = SearchKey;
+ ProtNotify->Position = ProtNotify->Position->ForwardLink;
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Locates the handle to a device on the device path that best matches the specified protocol.
+
+ @param Protocol The protocol to search for.
+ @param DevicePath On input, a pointer to a pointer to the device
+ path. On output, the device path pointer is
+ modified to point to the remaining part of the
+ devicepath.
+ @param Device A pointer to the returned device handle.
+
+ @retval EFI_SUCCESS The resulting handle was returned.
+ @retval EFI_NOT_FOUND No handles matched the search.
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateDevicePath (
+ IN EFI_GUID *Protocol,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath,
+ OUT EFI_HANDLE *Device
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Boot Service called to add, modify, or remove a system configuration table from
+ the EFI System Table.
+
+ @param Guid Pointer to the GUID for the entry to add, update, or
+ remove
+ @param Table Pointer to the configuration table for the entry to add,
+ update, or remove, may be NULL.
+
+ @return EFI_SUCCESS Guid, Table pair added, updated, or removed.
+ @return EFI_INVALID_PARAMETER Input GUID not valid.
+ @return EFI_NOT_FOUND Attempted to delete non-existant entry
+ @return EFI_OUT_OF_RESOURCES Not enough memory available
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestInstallConfigurationTable (
+ IN EFI_GUID *Guid,
+ IN VOID *Table
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Locates the installed protocol handler for the handle, and
+ invokes it to obtain the protocol interface. Usage information
+ is registered in the protocol data base.
+
+ @param UserHandle The handle to obtain the protocol interface on
+ @param Protocol The ID of the protocol
+ @param Interface The location to return the protocol interface
+ @param ImageHandle The handle of the Image that is opening the
+ protocol interface specified by Protocol and
+ Interface.
+ @param ControllerHandle The controller handle that is requiring this
+ interface.
+ @param Attributes The open mode of the protocol interface
+ specified by Handle and Protocol.
+
+ @retval EFI_INVALID_PARAMETER Protocol is NULL.
+ @retval EFI_SUCCESS Get the protocol interface.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestOpenProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT VOID **Interface OPTIONAL,
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_HANDLE ControllerHandle,
+ IN UINT32 Attributes
+ )
+{
+ EFI_STATUS Status;
+ PROTOCOL_INTERFACE *Prot;
+ LIST_ENTRY *Link;
+ OPEN_PROTOCOL_DATA *OpenData;
+ BOOLEAN ByDriver;
+ BOOLEAN Exclusive;
+ BOOLEAN Disconnect;
+ BOOLEAN ExactMatch;
+
+ //
+ // Check for invalid Protocol
+ //
+ if (Protocol == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check for invalid Interface
+ //
+ if ((Attributes != EFI_OPEN_PROTOCOL_TEST_PROTOCOL) && (Interface == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check for invalid UserHandle
+ //
+ Status = UnitTestValidateHandle (UserHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Check for invalid Attributes
+ //
+ switch (Attributes) {
+ case EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER:
+ Status = UnitTestValidateHandle (ImageHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = UnitTestValidateHandle (ControllerHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (UserHandle == ControllerHandle) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ break;
+ case EFI_OPEN_PROTOCOL_BY_DRIVER:
+ case EFI_OPEN_PROTOCOL_BY_DRIVER | EFI_OPEN_PROTOCOL_EXCLUSIVE:
+ Status = UnitTestValidateHandle (ImageHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = UnitTestValidateHandle (ControllerHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ break;
+ case EFI_OPEN_PROTOCOL_EXCLUSIVE:
+ Status = UnitTestValidateHandle (ImageHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ break;
+ case EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL:
+ case EFI_OPEN_PROTOCOL_GET_PROTOCOL:
+ case EFI_OPEN_PROTOCOL_TEST_PROTOCOL:
+ break;
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Look at each protocol interface for a match
+ //
+ Prot = UnitTestGetProtocolInterface (UserHandle, Protocol);
+ if (Prot == NULL) {
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ Status = EFI_SUCCESS;
+
+ ByDriver = FALSE;
+ Exclusive = FALSE;
+ for ( Link = Prot->OpenList.ForwardLink; Link != &Prot->OpenList; Link = Link->ForwardLink) {
+ OpenData = CR (Link, OPEN_PROTOCOL_DATA, Link, OPEN_PROTOCOL_DATA_SIGNATURE);
+ ExactMatch = (BOOLEAN)((OpenData->AgentHandle == ImageHandle) &&
+ (OpenData->Attributes == Attributes) &&
+ (OpenData->ControllerHandle == ControllerHandle));
+ if ((OpenData->Attributes & EFI_OPEN_PROTOCOL_BY_DRIVER) != 0) {
+ ByDriver = TRUE;
+ if (ExactMatch) {
+ Status = EFI_ALREADY_STARTED;
+ goto Done;
+ }
+ }
+
+ if ((OpenData->Attributes & EFI_OPEN_PROTOCOL_EXCLUSIVE) != 0) {
+ Exclusive = TRUE;
+ } else if (ExactMatch) {
+ OpenData->OpenCount++;
+ Status = EFI_SUCCESS;
+ goto Done;
+ }
+ }
+
+ //
+ // ByDriver TRUE -> A driver is managing (UserHandle, Protocol)
+ // ByDriver FALSE -> There are no drivers managing (UserHandle, Protocol)
+ // Exclusive TRUE -> Something has exclusive access to (UserHandle, Protocol)
+ // Exclusive FALSE -> Nothing has exclusive access to (UserHandle, Protocol)
+ //
+
+ switch (Attributes) {
+ case EFI_OPEN_PROTOCOL_BY_DRIVER:
+ if (Exclusive || ByDriver) {
+ Status = EFI_ACCESS_DENIED;
+ goto Done;
+ }
+
+ break;
+ case EFI_OPEN_PROTOCOL_BY_DRIVER | EFI_OPEN_PROTOCOL_EXCLUSIVE:
+ case EFI_OPEN_PROTOCOL_EXCLUSIVE:
+ if (Exclusive) {
+ Status = EFI_ACCESS_DENIED;
+ goto Done;
+ }
+
+ if (ByDriver) {
+ do {
+ Disconnect = FALSE;
+ for (Link = Prot->OpenList.ForwardLink; Link != &Prot->OpenList; Link = Link->ForwardLink) {
+ OpenData = CR (Link, OPEN_PROTOCOL_DATA, Link, OPEN_PROTOCOL_DATA_SIGNATURE);
+ if ((OpenData->Attributes & EFI_OPEN_PROTOCOL_BY_DRIVER) != 0) {
+ Disconnect = TRUE;
+ Status = UnitTestDisconnectController (UserHandle, OpenData->AgentHandle, NULL);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_ACCESS_DENIED;
+ goto Done;
+ } else {
+ break;
+ }
+ }
+ }
+ } while (Disconnect);
+ }
+
+ break;
+ case EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER:
+ case EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL:
+ case EFI_OPEN_PROTOCOL_GET_PROTOCOL:
+ case EFI_OPEN_PROTOCOL_TEST_PROTOCOL:
+ break;
+ }
+
+ if (ImageHandle == NULL) {
+ Status = EFI_SUCCESS;
+ goto Done;
+ }
+
+ //
+ // Create new entry
+ //
+ OpenData = AllocatePool (sizeof (OPEN_PROTOCOL_DATA));
+ if (OpenData == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ } else {
+ OpenData->Signature = OPEN_PROTOCOL_DATA_SIGNATURE;
+ OpenData->AgentHandle = ImageHandle;
+ OpenData->ControllerHandle = ControllerHandle;
+ OpenData->Attributes = Attributes;
+ OpenData->OpenCount = 1;
+ InsertTailList (&Prot->OpenList, &OpenData->Link);
+ Prot->OpenListCount++;
+ Status = EFI_SUCCESS;
+ }
+
+Done:
+
+ if (Attributes != EFI_OPEN_PROTOCOL_TEST_PROTOCOL) {
+ //
+ // Keep Interface unmodified in case of any Error
+ // except EFI_ALREADY_STARTED and EFI_UNSUPPORTED.
+ //
+ if (!EFI_ERROR (Status) || (Status == EFI_ALREADY_STARTED)) {
+ //
+ // According to above logic, if 'Prot' is NULL, then the 'Status' must be
+ // EFI_UNSUPPORTED. Here the 'Status' is not EFI_UNSUPPORTED, so 'Prot'
+ // must be not NULL.
+ //
+ // The ASSERT here is for addressing a false positive NULL pointer
+ // dereference issue raised from static analysis.
+ //
+ ASSERT (Prot != NULL);
+ //
+ // EFI_ALREADY_STARTED is not an error for bus driver.
+ // Return the corresponding protocol interface.
+ //
+ *Interface = Prot->Interface;
+ } else if (Status == EFI_UNSUPPORTED) {
+ //
+ // Return NULL Interface if Unsupported Protocol.
+ //
+ *Interface = NULL;
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Closes a protocol on a handle that was opened using OpenProtocol().
+
+ @param UserHandle The handle for the protocol interface that was
+ previously opened with OpenProtocol(), and is
+ now being closed.
+ @param Protocol The published unique identifier of the protocol.
+ It is the caller's responsibility to pass in a
+ valid GUID.
+ @param AgentHandle The handle of the agent that is closing the
+ protocol interface.
+ @param ControllerHandle If the agent that opened a protocol is a driver
+ that follows the EFI Driver Model, then this
+ parameter is the controller handle that required
+ the protocol interface. If the agent does not
+ follow the EFI Driver Model, then this parameter
+ is optional and may be NULL.
+
+ @retval EFI_SUCCESS The protocol instance was closed.
+ @retval EFI_INVALID_PARAMETER Handle, AgentHandle or ControllerHandle is not a
+ valid EFI_HANDLE.
+ @retval EFI_NOT_FOUND Can not find the specified protocol or
+ AgentHandle.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestCloseProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_HANDLE AgentHandle,
+ IN EFI_HANDLE ControllerHandle
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Return information about Opened protocols in the system
+
+ @param UserHandle The handle to close the protocol interface on
+ @param Protocol The ID of the protocol
+ @param EntryBuffer A pointer to a buffer of open protocol
+ information in the form of
+ EFI_OPEN_PROTOCOL_INFORMATION_ENTRY structures.
+ @param EntryCount Number of EntryBuffer entries
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestOpenProtocolInformation (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT EFI_OPEN_PROTOCOL_INFORMATION_ENTRY **EntryBuffer,
+ OUT UINTN *EntryCount
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Retrieves the list of protocol interface GUIDs that are installed on a handle in a buffer allocated
+ from pool.
+
+ @param UserHandle The handle from which to retrieve the list of
+ protocol interface GUIDs.
+ @param ProtocolBuffer A pointer to the list of protocol interface GUID
+ pointers that are installed on Handle.
+ @param ProtocolBufferCount A pointer to the number of GUID pointers present
+ in ProtocolBuffer.
+
+ @retval EFI_SUCCESS The list of protocol interface GUIDs installed
+ on Handle was returned in ProtocolBuffer. The
+ number of protocol interface GUIDs was returned
+ in ProtocolBufferCount.
+ @retval EFI_INVALID_PARAMETER Handle is NULL.
+ @retval EFI_INVALID_PARAMETER Handle is not a valid EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER ProtocolBuffer is NULL.
+ @retval EFI_INVALID_PARAMETER ProtocolBufferCount is NULL.
+ @retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the
+ results.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestProtocolsPerHandle (
+ IN EFI_HANDLE UserHandle,
+ OUT EFI_GUID ***ProtocolBuffer,
+ OUT UINTN *ProtocolBufferCount
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Function returns an array of handles that support the requested protocol
+ in a buffer allocated from pool. This is a version of UnitTestLocateHandle()
+ that allocates a buffer for the caller.
+
+ @param SearchType Specifies which handle(s) are to be returned.
+ @param Protocol Provides the protocol to search by. This
+ parameter is only valid for SearchType
+ ByProtocol.
+ @param SearchKey Supplies the search key depending on the
+ SearchType.
+ @param NumberHandles The number of handles returned in Buffer.
+ @param Buffer A pointer to the buffer to return the requested
+ array of handles that support Protocol.
+
+ @retval EFI_SUCCESS The result array of handles was returned.
+ @retval EFI_NOT_FOUND No handles match the search.
+ @retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the
+ matching results.
+ @retval EFI_INVALID_PARAMETER One or more parameters are not valid.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateHandleBuffer (
+ IN EFI_LOCATE_SEARCH_TYPE SearchType,
+ IN EFI_GUID *Protocol OPTIONAL,
+ IN VOID *SearchKey OPTIONAL,
+ IN OUT UINTN *NumberHandles,
+ OUT EFI_HANDLE **Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN BufferSize;
+
+ if (NumberHandles == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ BufferSize = 0;
+ *NumberHandles = 0;
+ *Buffer = NULL;
+ Status = UnitTestLocateHandle (
+ SearchType,
+ Protocol,
+ SearchKey,
+ &BufferSize,
+ *Buffer
+ );
+ //
+ // LocateHandleBuffer() returns incorrect status code if SearchType is
+ // invalid.
+ //
+ // Add code to correctly handle expected errors from UnitTestLocateHandle().
+ //
+ if (EFI_ERROR (Status) && (Status != EFI_BUFFER_TOO_SMALL)) {
+ if (Status != EFI_INVALID_PARAMETER) {
+ Status = EFI_NOT_FOUND;
+ }
+
+ return Status;
+ }
+
+ *Buffer = AllocatePool (BufferSize);
+ if (*Buffer == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Status = UnitTestLocateHandle (
+ SearchType,
+ Protocol,
+ SearchKey,
+ &BufferSize,
+ *Buffer
+ );
+
+ *NumberHandles = BufferSize / sizeof (EFI_HANDLE);
+ if (EFI_ERROR (Status)) {
+ *NumberHandles = 0;
+ }
+
+ return Status;
+}
+
+/**
+ Return the first Protocol Interface that matches the Protocol GUID. If
+ Registration is passed in, return a Protocol Instance that was just add
+ to the system. If Registration is NULL return the first Protocol Interface
+ you find.
+
+ @param Protocol The protocol to search for
+ @param Registration Optional Registration Key returned from
+ RegisterProtocolNotify()
+ @param Interface Return the Protocol interface (instance).
+
+ @retval EFI_SUCCESS If a valid Interface is returned
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_NOT_FOUND Protocol interface not found
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestLocateProtocol (
+ IN EFI_GUID *Protocol,
+ IN VOID *Registration OPTIONAL,
+ OUT VOID **Interface
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Installs a list of protocol interface into the boot services environment.
+ This function calls InstallProtocolInterface() in a loop. If any error
+ occurs all the protocols added by this function are removed. This is
+ basically a lib function to save space.
+
+ @param Handle The handle to install the protocol handlers on,
+ or NULL if a new handle is to be allocated
+ @param ... EFI_GUID followed by protocol instance. A NULL
+ terminates the list. The pairs are the
+ arguments to InstallProtocolInterface(). All the
+ protocols are added to Handle.
+
+ @retval EFI_SUCCESS All the protocol interface was installed.
+ @retval EFI_OUT_OF_RESOURCES There was not enough memory in pool to install all the protocols.
+ @retval EFI_ALREADY_STARTED A Device Path Protocol instance was passed in that is already present in
+ the handle database.
+ @retval EFI_INVALID_PARAMETER Handle is NULL.
+ @retval EFI_INVALID_PARAMETER Protocol is already installed on the handle specified by Handle.
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestInstallMultipleProtocolInterfaces (
+ IN OUT EFI_HANDLE *Handle,
+ ...
+ )
+{
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Uninstalls a list of protocol interface in the boot services environment.
+ This function calls UninstallProtocolInterface() in a loop. This is
+ basically a lib function to save space.
+
+ @param Handle The handle to uninstall the protocol
+ @param ... EFI_GUID followed by protocol instance. A NULL
+ terminates the list. The pairs are the
+ arguments to UninstallProtocolInterface(). All
+ the protocols are added to Handle.
+
+ @return Status code
+
+**/
+EFI_STATUS
+EFIAPI
+UnitTestUninstallMultipleProtocolInterfaces (
+ IN EFI_HANDLE Handle,
+ ...
+ )
+{
+ EFI_STATUS Status;
+ VA_LIST Args;
+ EFI_GUID *Protocol;
+ VOID *Interface;
+ UINTN Index;
+
+ VA_START (Args, Handle);
+ for (Index = 0, Status = EFI_SUCCESS; !EFI_ERROR (Status); Index++) {
+ //
+ // If protocol is NULL, then it's the end of the list
+ //
+ Protocol = VA_ARG (Args, EFI_GUID *);
+ if (Protocol == NULL) {
+ break;
+ }
+
+ Interface = VA_ARG (Args, VOID *);
+
+ //
+ // Uninstall it
+ //
+ Status = UnitTestUninstallProtocolInterface (Handle, Protocol, Interface);
+ }
+
+ VA_END (Args);
+
+ //
+ // If there was an error, add all the interfaces that were
+ // uninstalled without any errors
+ //
+ if (EFI_ERROR (Status)) {
+ //
+ // Reset the va_arg back to the first argument.
+ //
+ VA_START (Args, Handle);
+ for ( ; Index > 1; Index--) {
+ Protocol = VA_ARG (Args, EFI_GUID *);
+ Interface = VA_ARG (Args, VOID *);
+ UnitTestInstallProtocolInterface (&Handle, Protocol, EFI_NATIVE_INTERFACE, Interface);
+ }
+
+ VA_END (Args);
+ Status = EFI_INVALID_PARAMETER;
+ }
+
+ return Status;
+}
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibProtocol.h b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibProtocol.h new file mode 100644 index 0000000..fe91e0e --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibProtocol.h @@ -0,0 +1,120 @@ +/** @file
+ An internal header file for the Unit Test instance of the UEFI Boot Services Table Library.
+
+ This file includes common header files, defines internal structure and functions used by
+ the library implementation.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef UEFI_BOOT_SERVICES_TABLE_LIB_UNIT_TEST_PROTOCOL_H_
+#define UEFI_BOOT_SERVICES_TABLE_LIB_UNIT_TEST_PROTOCOL_H_
+
+#include "UnitTestUefiBootServicesTableLib.h"
+
+#define EFI_HANDLE_SIGNATURE SIGNATURE_32('h','n','d','l')
+
+///
+/// IHANDLE - contains a list of protocol handles
+///
+typedef struct {
+ UINTN Signature;
+ /// All handles list of IHANDLE
+ LIST_ENTRY AllHandles;
+ /// List of PROTOCOL_INTERFACE's for this handle
+ LIST_ENTRY Protocols;
+ UINTN LocateRequest;
+ /// The Handle Database Key value when this handle was last created or modified
+ UINT64 Key;
+} IHANDLE;
+
+#define ASSERT_IS_HANDLE(a) ASSERT((a)->Signature == EFI_HANDLE_SIGNATURE)
+
+#define PROTOCOL_ENTRY_SIGNATURE SIGNATURE_32('p','r','t','e')
+
+///
+/// PROTOCOL_ENTRY - each different protocol has 1 entry in the protocol
+/// database. Each handler that supports this protocol is listed, along
+/// with a list of registered notifies.
+///
+typedef struct {
+ UINTN Signature;
+ /// Link Entry inserted to mProtocolDatabase
+ LIST_ENTRY AllEntries;
+ /// ID of the protocol
+ EFI_GUID ProtocolID;
+ /// All protocol interfaces
+ LIST_ENTRY Protocols;
+ /// Registered notification handlers
+ LIST_ENTRY Notify;
+} PROTOCOL_ENTRY;
+
+#define PROTOCOL_INTERFACE_SIGNATURE SIGNATURE_32('p','i','f','c')
+
+///
+/// PROTOCOL_INTERFACE - each protocol installed on a handle is tracked
+/// with a protocol interface structure
+///
+typedef struct {
+ UINTN Signature;
+ /// Link on IHANDLE.Protocols
+ LIST_ENTRY Link;
+ /// Back pointer
+ IHANDLE *Handle;
+ /// Link on PROTOCOL_ENTRY.Protocols
+ LIST_ENTRY ByProtocol;
+ /// The protocol ID
+ PROTOCOL_ENTRY *Protocol;
+ /// The interface value
+ VOID *Interface;
+ /// OPEN_PROTOCOL_DATA list
+ LIST_ENTRY OpenList;
+ UINTN OpenListCount;
+} PROTOCOL_INTERFACE;
+
+#define OPEN_PROTOCOL_DATA_SIGNATURE SIGNATURE_32('p','o','d','l')
+
+typedef struct {
+ UINTN Signature;
+ /// Link on PROTOCOL_INTERFACE.OpenList
+ LIST_ENTRY Link;
+
+ EFI_HANDLE AgentHandle;
+ EFI_HANDLE ControllerHandle;
+ UINT32 Attributes;
+ UINT32 OpenCount;
+} OPEN_PROTOCOL_DATA;
+
+#define PROTOCOL_NOTIFY_SIGNATURE SIGNATURE_32('p','r','t','n')
+
+///
+/// PROTOCOL_NOTIFY - used for each register notification for a protocol
+///
+typedef struct {
+ UINTN Signature;
+ PROTOCOL_ENTRY *Protocol;
+ /// All notifications for this protocol
+ LIST_ENTRY Link;
+ /// Event to notify
+ EFI_EVENT Event;
+ /// Last position notified
+ LIST_ENTRY *Position;
+} PROTOCOL_NOTIFY;
+
+typedef struct {
+ EFI_GUID *Protocol;
+ VOID *SearchKey;
+ LIST_ENTRY *Position;
+ PROTOCOL_ENTRY *ProtEntry;
+} LOCATE_POSITION;
+
+typedef
+IHANDLE *
+(*UNIT_TEST_GET_NEXT) (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ );
+
+#endif
diff --git a/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibTpl.c b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibTpl.c new file mode 100644 index 0000000..2837a46 --- /dev/null +++ b/UnitTestFrameworkPkg/Library/UnitTestUefiBootServicesTableLib/UnitTestUefiBootServicesTableLibTpl.c @@ -0,0 +1,43 @@ +/** @file
+ Implementation of Task Priority Level (TPL) related services in the UEFI Boot Services table for use in unit tests.
+
+Copyright (c) Microsoft Corporation
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "UnitTestUefiBootServicesTableLib.h"
+
+/**
+ Raise the task priority level to the new level.
+ High level is implemented by disabling processor interrupts.
+
+ @param NewTpl New task priority level
+
+ @return The previous task priority level
+
+**/
+EFI_TPL
+EFIAPI
+UnitTestRaiseTpl (
+ IN EFI_TPL NewTpl
+ )
+{
+ return TPL_APPLICATION;
+}
+
+/**
+ Lowers the task priority to the previous value. If the new
+ priority unmasks events at a higher priority, they are dispatched.
+
+ @param NewTpl New, lower, task priority
+
+**/
+VOID
+EFIAPI
+UnitTestRestoreTpl (
+ IN EFI_TPL NewTpl
+ )
+{
+ return;
+}
|