diff options
Diffstat (limited to 'QuarkSocPkg/QuarkSouthCluster/Include/SDHostIo.h')
| -rw-r--r-- | QuarkSocPkg/QuarkSouthCluster/Include/SDHostIo.h | 333 |
1 files changed, 0 insertions, 333 deletions
diff --git a/QuarkSocPkg/QuarkSouthCluster/Include/SDHostIo.h b/QuarkSocPkg/QuarkSouthCluster/Include/SDHostIo.h deleted file mode 100644 index 7ce0793..0000000 --- a/QuarkSocPkg/QuarkSouthCluster/Include/SDHostIo.h +++ /dev/null @@ -1,333 +0,0 @@ -/** @file
-
-Interface definition for EFI_SD_HOST_IO_PROTOCOL.
-
-Copyright (c) 2013-2015 Intel Corporation.
-
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef _SD_HOST_IO_H
-#define _SD_HOST_IO_H
-
-#include "SDCard.h"
-#include "CEATA.h"
-
-
-#define EFI_SD_HOST_IO_PROTOCOL_GUID \
- { \
- 0xb63f8ec7, 0xa9c9, 0x4472, {0xa4, 0xc0, 0x4d, 0x8b, 0xf3, 0x65, 0xcc, 0x51} \
- }
-
-///
-/// Forward reference for pure ANSI compatability
-///
-typedef struct _EFI_SD_HOST_IO_PROTOCOL EFI_SD_HOST_IO_PROTOCOL;
-
-
-
-typedef enum {
- ResponseNo = 0,
- ResponseR1,
- ResponseR1b,
- ResponseR2,
- ResponseR3,
- ResponseR4,
- ResponseR5,
- ResponseR5b,
- ResponseR6,
- ResponseR7
-}RESPONSE_TYPE;
-
-typedef enum {
- NoData = 0,
- InData,
- OutData
-}TRANSFER_TYPE;
-
-typedef enum {
- Reset_Auto = 0,
- Reset_DAT,
- Reset_CMD,
- Reset_DAT_CMD,
- Reset_All
-}RESET_TYPE;
-
-#define PCI_SUBCLASS_SD_HOST_CONTROLLER 0x05
-#define PCI_IF_STANDARD_HOST_NO_DMA 0x00
-#define PCI_IF_STANDARD_HOST_SUPPORT_DMA 0x01
-
-#define SDHCI_SPEC_100 0
-#define SDHCI_SPEC_200 1
-#define SDHCI_SPEC_300 2
-
-//
-//MMIO Registers definition for MMC/SDIO controller
-//
-#define MMIO_DMAADR 0x00
-#define MMIO_BLKSZ 0x04
-#define MMIO_BLKCNT 0x06
-#define MMIO_CMDARG 0x08
-#define MMIO_XFRMODE 0x0C
-#define MMIO_SDCMD 0x0E
-#define MMIO_RESP 0x10
-#define MMIO_BUFDATA 0x20
-#define MMIO_PSTATE 0x24
-#define MMIO_HOSTCTL 0x28
-#define MMIO_PWRCTL 0x29
-#define MMIO_BLKGAPCTL 0x2A
-#define MMIO_WAKECTL 0x2B
-#define MMIO_CLKCTL 0x2C
-#define V_MMIO_CLKCTL_MAX_8BIT_FREQ_SEL 0x80
-#define V_MMIO_CLKCTL_MAX_10BIT_FREQ_SEL 0x3FF
-#define B_MMIO_CLKCTL_UPR_SDCLK_FREQ_SEL_MASK 0xC0
-
-#define MMIO_TOCTL 0x2E
-#define MMIO_SWRST 0x2F
-#define MMIO_NINTSTS 0x30
-#define MMIO_ERINTSTS 0x32
-#define MMIO_NINTEN 0x34
-#define MMIO_ERINTEN 0x36
-#define MMIO_NINTSIGEN 0x38
-#define MMIO_ERINTSIGEN 0x3A
-#define MMIO_AC12ERRSTS 0x3C
-#define MMIO_HOSTCTL2 0x3E
-#define MMIO_CAP 0x40
-#define MMIO_MCCAP 0x48
-#define MMIO_SLTINTSTS 0xFC
-#define MMIO_CTRLRVER 0xFE
-#define MMIO_SRST 0x1FC
-
-//
-// Protocol definitions
-//
-
-/**
- The main function used to send the command to the card inserted into the SD host slot.
- It will assemble the arguments to set the command register and wait for the command
- and transfer completed until timeout. Then it will read the response register to fill
- the ResponseData.
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param CommandIndex The command index to set the command index field of command register.
- @param Argument Command argument to set the argument field of command register.
- @param DataType TRANSFER_TYPE, indicates no data, data in or data out.
- @param Buffer Contains the data read from / write to the device.
- @param BufferSize The size of the buffer.
- @param ResponseType RESPONSE_TYPE.
- @param TimeOut Time out value in 1 ms unit.
- @param ResponseData Depending on the ResponseType, such as CSD or card status.
-
- @retval EFI_SUCCESS
- @retval EFI_INVALID_PARAMETER
- @retval EFI_OUT_OF_RESOURCES
- @retval EFI_TIMEOUT
- @retval EFI_DEVICE_ERROR
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN UINT16 CommandIndex,
- IN UINT32 Argument,
- IN TRANSFER_TYPE DataType,
- IN UINT8 *Buffer, OPTIONAL
- IN UINT32 BufferSize,
- IN RESPONSE_TYPE ResponseType,
- IN UINT32 TimeOut,
- OUT UINT32 *ResponseData OPTIONAL
- );
-
-/**
- Set max clock frequency of the host, the actual frequency may not be the same as MaxFrequency.
- It depends on the max frequency the host can support, divider, and host speed mode.
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param MaxFrequency Max frequency in HZ.
-
- @retval EFI_SUCCESS
- @retval EFI_TIMEOUT
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN UINT32 MaxFrequency
- );
-
-
-/**
- Set bus width of the host controller
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param BusWidth Bus width in 1, 4, 8 bits.
-
- @retval EFI_SUCCESS
- @retval EFI_INVALID_PARAMETER
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN UINT32 BusWidth
- );
-
-/**
- Set voltage which could supported by the host controller.
- Support 0(Power off the host), 1.8V, 3.0V, 3.3V
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param Voltage Units in 0.1 V.
-
- @retval EFI_SUCCESS
- @retval EFI_INVALID_PARAMETER
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN UINT32 Voltage
- );
-
-/**
- Reset the host controller.
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param ResetAll TRUE to reset all.
-
- @retval EFI_SUCCESS
- @retval EFI_TIMEOUT
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN RESET_TYPE ResetType
- );
-
-/**
- Enable auto stop on the host controller.
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param Enable TRUE to enable, FALSE to disable.
-
- @retval EFI_SUCCESS
- @retval EFI_TIMEOUT
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN BOOLEAN Enable
- );
-
-/**
- Find whether these is a card inserted into the slot. If so init the host.
- If not, return EFI_NOT_FOUND.
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
-
- @retval EFI_SUCCESS
- @retval EFI_NOT_FOUND
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST) (
- IN EFI_SD_HOST_IO_PROTOCOL *This
- );
-
-/**
- Set the Block length on the host controller.
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param BlockLength card supportes block length.
-
- @retval EFI_SUCCESS
- @retval EFI_TIMEOUT
-
-**/
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN UINT32 BlockLength
- );
-
-/**
- Enable/Disable High Speed transfer mode
-
- @param This A pointer to the EFI_SD_HOST_IO_PROTOCOL instance.
- @param Enable TRUE to Enable, FALSE to Disable
-
- @return EFI_SUCCESS
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_HIGH_SPEED_MODE) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN BOOLEAN Enable
- );
-
-typedef
-EFI_STATUS
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_DUAL_DATARATE_MODE) (
- IN EFI_SD_HOST_IO_PROTOCOL *This,
- IN BOOLEAN Enable
- );
-
-
-
-#define EFI_SD_HOST_IO_PROTOCOL_REVISION_01 0x02
-
-
-typedef struct {
- UINT32 HighSpeedSupport: 1; //High speed supported
- UINT32 V18Support: 1; //1.8V supported
- UINT32 V30Support: 1; //3.0V supported
- UINT32 V33Support: 1; //3.3V supported
- UINT32 Reserved0: 4;
- UINT32 HostVersion: 8;
- UINT32 BusWidth4: 1; // 4 bit width
- UINT32 BusWidth8: 1; // 8 bit width
- UINT32 Reserved1: 14;
- UINT32 BoundarySize;
-}HOST_CAPABILITY;
-
-
-//
-// Interface structure for the SD HOST I/O Protocol
-//
-struct _EFI_SD_HOST_IO_PROTOCOL {
- UINT32 Revision;
- HOST_CAPABILITY HostCapability;
- EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND SendCommand;
- EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY SetClockFrequency;
- EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH SetBusWidth;
- EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE SetHostVoltage;
- EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST ResetSDHost;
- EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD EnableAutoStopCmd;
- EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST DetectCardAndInitHost;
- EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH SetBlockLength;
- EFI_SD_HOST_IO_PROTOCOL_HIGH_SPEED_MODE SetHighSpeedMode;
- EFI_SD_HOST_IO_PROTOCOL_DUAL_DATARATE_MODE SetDDRMode;
-};
-
-extern EFI_GUID gEfiSDHostIoProtocolGuid;
-
-#endif
|