diff options
Diffstat (limited to 'QuarkPlatformPkg/Readme.md')
-rw-r--r-- | QuarkPlatformPkg/Readme.md | 685 |
1 files changed, 0 insertions, 685 deletions
diff --git a/QuarkPlatformPkg/Readme.md b/QuarkPlatformPkg/Readme.md deleted file mode 100644 index 126de69..0000000 --- a/QuarkPlatformPkg/Readme.md +++ /dev/null @@ -1,685 +0,0 @@ -# **EDK II firmware for Intel(R) Quark SoC X1000 based platforms**
-
-## **Features**
-* UEFI firmware image with ability to enable/disable major features such as
- - Logging
- - Source level debug using [Intel(R) UEFI Development Kit Debugger Tool](
- https://firmware.intel.com/develop/intel-uefi-tools-and-utilities/intel-uefi-development-kit-debugger-tool)
- - Boot Performance Measurements
- - UEFI Secure Boot with Physical Presence
- - TCG Measured Boot using TPM 1.2 hardware devices on I2C bus
-* Minimal firmware image for initial power-on and debug
-* UEFI Shell built into FLASH image
-* UEFI Linux operating system boot support from Micro SD FLASH
-* Hardware Support
- - [Intel(R) Quark SoC X1000 CPU](
- http://www.intel.com/content/www/us/en/embedded/products/quark/quark-x1000-datasheet.html)
- - [Intel(R) Galileo Development Board](
- http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo-g1-datasheet.html)
- - [Intel(R) Galileo Gen 2 Development Board](
- http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo-overview.html)
- - HPET Timer
- - Real Time Clock
-* Major I/O Subsystems
- - PCI including support for Mini PCI Express Cards
- - USB using EHCI and OHCI host controllers
- - Micro SD FLASH with FAT file system support
- - Serial UART up to 921600 baud for console, logging, and debug
-* ACPI Tables with ACPI S3 sleep state support
-* SMBIOS Tables
-
-## **Windows Build Instructions**
-
-### Pre-requisites
-
-* GIT client: Available from https://git-scm.com/downloads
-* Microsoft Visual Studio.
- - Visual Studio 2015 recommended and is used in the examples below.
-* Microsoft Windows Driver Development Kit 3790.1830
- - http://download.microsoft.com/download/9/0/f/90f019ac-8243-48d3-91cf-81fc4093ecfd/1830_usa_ddk.iso
- - Mount ISO image
- - Right click on ```x86\kitsetup.exe``` & choose **Run as administrator**
- - Install to C:\WINDDK\3790.1830
- - Uncheck all Component Groups
- - Expand Build Environment Component
- - Check Windows Driver Development Kit 16-bit Additional Build Tools
- - Install
-* ASL compiler: Available from http://www.acpica.org
- - Install into ```C:\ASL``` to match default tools_def.txt configuration.
-* Python 2.7: Available from http://www.python.org
-
-Create a new directory for an EDK II WORKSPACE.
-
-The code block below shows the GIT clone operations required to pull the EDK II
-source tree and the edk2-non-osi repository that provides a binary file for the
-Quark Remote Management Unit (RMU).
-
-Next it sets environment variables that must be set before running
-```edksetup.bat```. Since content is being pulled from multiple repositories,
-the EDK II [Multiple Workspace](
-https://github.com/tianocore/tianocore.github.io/wiki/Multiple_Workspace)
-feature is used.
-
-Next, the EDK II BaseTools required to build firmware images are built.
-
-Next, the ```edksetup.bat``` file is run to complete the initialization of an
-EDK II build environment. Two example build commands are shown. The first one
-in ```QuarkPlatformPlg/Quark.dsc``` builds a full UEFI firmware image that is
-able to boot the built-in UEFI Shell and Linux from a micro SD FLASH card. The
-second one in ```QuarkPlatformPkg/QuarkMin.dsc``` builds a minimal firmware
-image that is useful for initial power-on and debug of new features.
-
-```cmd
-git clone https://github.com/tianocore/edk2.git
-git clone https://github.com/tianocore/edk2-non-osi.git
-
-set PYTHON_HOME=c:\Python27
-set WORKSPACE=%CD%
-set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\edk2-non-osi\Silicon\Intel
-set EDK_TOOLS_PATH=%WORKSPACE%\edk2\BaseTools
-cd %WORKSPACE%\edk2
-
-BaseTools\toolsetup.bat Rebuild
-
-edksetup.bat Rebuild
-
-build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc
-build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/QuarkMin.dsc
-```
-
-## **Linux Build Instructions**
-
-### Pre-requisites
-
-* GIT client
-* GCC 4.9 compiler
-* ASL compiler: Available from http://www.acpica.org.
-* Python 2.7
-
-Create a new directory for an EDK II WORKSPACE.
-
-The code block below shows the GIT clone operations required to pull the EDK II
-source tree and the edk2-non-osi repository that provides a binary file for the
-Quark Remote Management Unit (RMU).
-
-Next it sets environment variables that must be set before running
-```edksetup.bat```. Since content is being pulled from multiple repositories,
-the EDK II [Multiple Workspace](
-https://github.com/tianocore/tianocore.github.io/wiki/Multiple_Workspace)
-feature is used.
-
-Next, the EDK II BaseTools required to build firmware images are built.
-
-Next, the ```edksetup.sh``` file is run to complete the initialization of an
-EDK II build environment. Two example build commands are shown. The first one
-in ```QuarkPlatformPlg/Quark.dsc``` builds a full UEFI firmware image that is
-able to boot the built-in UEFI Shell and Linux from a micro SD FLASH card. The
-second one in ```QuarkPlatformPkg/QuarkMin.dsc``` builds a minimal firmware
-image that is useful for initial power-on and debug of new features.
-
-```sh
-git clone https://github.com/tianocore/edk2.git
-git clone https://github.com/tianocore/edk2-non-osi.git
-
-export WORKSPACE=$PWD
-export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-non-osi/Silicon/Intel
-export EDK_TOOLS_PATH=$WORKSPACE/edk2/BaseTools
-cd $WORKSPACE/edk2
-
-make -C BaseTools
-
-. edksetup.sh BaseTools
-
-build -a IA32 -t GCC49 -p QuarkPlatformPkg/Quark.dsc
-build -a IA32 -t GCC49 -p QuarkPlatformPkg/QuarkMin.dsc
-```
-
-## **Build Features**
-
-The table below contains a summary of the build flags to enable or disable
-features on the build command line using ```-D``` flags.
-
-| **Define Name** | **Default Value** | **Supported Values** |
-| -------------------------- | ----------------- | -------------------- |
-| ```GALILEO``` | GEN2 | GEN1, GEN2 |
-| ```LOGGING``` | TRUE | TRUE, FALSE |
-| ```SOURCE_DEBUG_ENABLE``` | FALSE | TRUE, FALSE |
-| ```PERFORMANCE_ENABLE``` | FALSE | TRUE, FALSE |
-| ```SECURE_BOOT_ENABLE``` | FALSE | TRUE, FALSE |
-| ```MEASURED_BOOT_ENABLE``` | FALSE | TRUE, FALSE |
-| ```TPM_12_HARDWARE``` | NONE | NONE, LPC, ATMEL_I2C, INFINEON_I2C |
-| ```CAPSULE_ENABLE``` | FALSE | TRUE, FALSE |
-| ```RECOVERY_ENABLE``` | FALSE | TRUE, FALSE |
-
-* ```GALILEO``` - Used to specify the type of Intel(R) Galileo board type. The
- default is ```GEN2``` for the [Intel(R) Galileo Gen 2 Development Board](
- http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo-overview.html).
- The other supported value is ```GEN1``` for the [Intel(R) Galileo Development Board](
- http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo-g1-datasheet.html).
- Add ```-D GALILEO=GEN1``` to the build command for [Intel(R) Galileo Development Board](
- http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo-g1-datasheet.html).
-
-* ```LOGGING``` - Used to enable/disable logging messages from DEBUG() macros to
- a serial UART. The default is TRUE for enabled when the BUILDTARGET is DEBUG
- (```-b DEBUG```). The default is FALSE for disabled when the BUILDTARGET is
- not DEBUG (e.g. ```-b RELEASE```). Add ```-D LOGGING``` to the build command
- to force logging enabled. Add ```-D LOGGING=FALSE``` to force logging
- disabled.
-
-* ```SOURCE_DEBUG_ENABLE``` - Used to enable/disable source level debug using the
- [Intel(R) UEFI Development Kit Debugger Tool](
- https://firmware.intel.com/develop/intel-uefi-tools-and-utilities/intel-uefi-development-kit-debugger-tool).
- The default is FALSE for disabled. Add ```-D SOURCE_DEBUG_ENABLE``` to the
- build command line to enable source level debug.
-
-* ```PERFORMANCE_ENABLE``` - Used to enable/disable boot performance measurement.
- The default is FALSE for disabled. Add ```-D PERFORMANCE_ENABLE``` to the
- build command line to enable boot performance measurement. When this feature
- is enabled, both ```LOGGING``` and ```SOURCE_DEBUG_ENABLE``` are automatically
- disabled so there is not boot time overhead from the serial UART for logging
- messages or the debug agent.
-
-* ```SECURE_BOOT_ENABLE``` - Used to enable/disable UEFI Secure Boot features.
- The default is FALSE for disabled. Add ```-D SECURE_BOOT_ENABLE``` to the
- build command line to enable UEFI Secure Boot features.
-
-* ```MEASURED_BOOT_ENABLE``` - Used to enable/disable measurement of firmware
- code and data into a TPM 1.2 hardware device. The default is FALSE for
- disabled. Add ```-D MEASURED_BOOT_ENABLE``` to the build command line to
- enable UEFI Secure Boot features.
-
-* ```TPM_12_HARDWARE``` - Used to specify the type of TPM 1.2 hardware device
- that is connected to the Galileo board. This define is valid if the measure
- boot feature is enabled using ```-D MEASURED_BOOT_ENABLE```. The default is
- NONE for no TPM 1.2 hardware device connected. Add ```-D TPM_12_HARDWARE=LPC```
- for a TPM hardware device attached to an LPC bus (not supported on on Intel(R)
- Quark SoC X1000). Add ```-D TPM_12_HARDWARE=ATMEL_I2C``` for an
- [Atmel AT97SC3204T](http://www.atmel.com/devices/AT97SC3204T.aspx) or
- [Atmel AT97SC3205T](http://www.atmel.com/images/atmel-8883s-tpm-at97sc3205t-datasheet-summary.pdf)
- attached to the I2C bus of the Galileo Arduino header. Add
- ```-D TPM_12_HARDWARE=INFINION_I2C``` for an [Infineon SLB9645](
- http://www.infineon.com/dgdl/Infineon-TPM+SLB+9645-DS-v01_00-EN.pdf?fileId=5546d4625185e0e201518b83d0c63d7c)
- attached to the I2C bus of the Galileo Arduino header. The ATMEL_I2C setting
- has been tested with the [CryptoShield](https://www.sparkfun.com/products/13183)
- available from [SparkFun](https://www.sparkfun.com/).
-
-* ```CAPSULE_ENABLE``` - Used to enable/disable capsule update features.
- The default is FALSE for disabled. Add ```-D CAPSULE_ENABLE``` to the
- build command line to enable capsule update features.
- The build process generate capsule update image - QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap.
- The user need copy QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap and CapsuleApp.efi
- to a storage media attached to the Quark Board.
- Then the user can boot to shell and run ```CapsuleApp QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap```.
- In next reboot, the system firmware is updated.
-
-* ```RECOVERY_ENABLE``` - Used to enable/disable recovery features.
- The default is FALSE for disabled. Add ```-D RECOVERY_ENABLE``` to the
- build command line to enable recovery features.
- The build process generates the recovery capsule image - QUARKREC.Cap.
- Then the user need copy QUARKREC.Cap to a USB KEY, plug the USB KEY to the Quark Board.
- In next boot, if a user runs ForceRecovery.efi in shell, or if a user presses the RESET button during power on, warm reset or REBOOT,
- or if the FvMain is corrupted in flash, the system will boot into recovery mode.
-
-### **Example Build Commands**
-
-Default build with logging enabled:
-
-```build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc```
-
-Release build with logging disabled:
-
-```build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc -b RELEASE```
-
-Enable source level debugging:
-
-```build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc -D SOURCE_DEBUG_ENABLE```
-
-Enable boot performance metrics:
-
-```build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc -D PERFORMANCE_ENABLE```
-
-Enable UEFI Secure Boot features:
-
-```build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc -D UEFI_SECURE_BOOT```
-
-Enable UEFI Secure Boot and Measured Boot using Atmel I2C TPM hardware device:
-
-```build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc -D UEFI_SECURE_BOOT -D MEASURED_BOOT_ENABLE -D TPM_12_HARDWARE=ATMEL_I2C```
-
-## **FLASH Update using DediProg SF100**
-
-Once the sources have been downloaded, an EDK II build environment established,
-and an EDK II firmware image has been built, the EDK II firmware image needs to
-installed into the FLASH device on the target Galileo development board. One
-way to do this is with the [Dediprog SF100 IC Programmer](
-http://www.dediprog.com/pd/spi-flash-solution/SF100).
-
-* Install the DediProg SF100 software.
-
-* Connect the DediProg SF100 to the Galileo development board.
-
- ![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/Dediprog.jpg)
-
-* Make sure ```dpcmd.exe``` is in ```PATH```
-
- ```PATH=%PATH%;"c:\Program Files (x86)\DediProg\SF100"```
-
-* **NOTE**: It is recommended that the FLASH image that was shipped with the
- Galileo development board be read and saved before updating FLASH image. The
- command shown below read the FLASH image and saves it to the file
- called ```GalileoOriginalFirmware.bin```.
-
- ```dpcmd.exe -r GalileoOriginalFirmware.bin```
-
-* Update FLASH image using either the DediProg SF100 GUI or ```dpcmd.exe```.
- - Example update of Galileo firmware image when BUILDTARGET is DEBUG (default)
-
- ```dpcmd.exe -u%WORKSPACE%\Build\Quark\DEBUG_VS2015x86\FV\QUARK.fd ```
-
- - Example update of Galileo firmware image when BUILDTARGET is RELEASE
- (```-b RELEASE```)
-
- ```dpcmd.exe -u%WORKSPACE%\Build\Quark\RELEASE_VS2015x86\FV\QUARK.fd ```
-
-## **Setting up a Serial Console and Booting to UEFI Shell**
-
-After the FLASH is updated on Galileo, a serial cable is connected between the
-host system and the Galileo target. A serial terminal emulator (such as
-[Tera Term](https://en.osdn.jp/projects/ttssh2/releases/)) can be used to see
-the logging messages from DEBUG() macros and the serial console for the UEFI
-Boot Manager, UEFI Shell, and operating system.
-
-The default serial communication parameters for the Intel(R) Galileo Gen 2
-Development Board is 921600,n,8,1 with no hardware flow control.
-
-![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/TeraTermSerialParameters.png)
-
-The default serial communication parameters for the Intel(R) Galileo Development
-Board is 461800,n,8,1 with no hardware flow control.
-
-The following changes to the [Tera Term](https://en.osdn.jp/projects/ttssh2/releases/)
-configuration files are recommended for UEFI serial console compatibility.
-Some of the later use cases involve using the TCPIP mode, so some of these
-recommendation apply to the TCPIP use cases.
-
-* TERATERM.INI - Set terminal size to 80 x 25 and terminal settings to UTF8.
-
-![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/TeraTermTerminal.png)
-
-* TERATERM.INI - Set font type to Terminal to support box drawing glyphs.
-
-![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/TeraTermFont.png)
-
-* TERATERM.INI - Disable line mode to make TCPIP mode work like COM port mode.
-
-```ini
-; Line at a time mode
-EnableLineMode=off
-```
-
-* KEYBOARD.CNF - Disable VT function keys for F5..F10
-
-```ini
-[VT function keys]
-;F6 key
-;F6=64
-;F7 key
-;F7=65
-;F8 key
-;F8=66
-;F9 key
-;F9=67
-;F10 key
-;F10=68
-```
-
-* KEYBOARD.CNF - Disable X function keys for F1..F4
-
-```ini
-[X function keys]
-; F1 key
-XF1=off
-; F2 key
-;XF2=60
-XF2=off
-; F3 key
-;XF3=61
-XF3=off
-; F4 key
-;XF4=62
-XF4=off
-; F5 key
-;XF5=63
-```
-
-* KEYBOARD.CNF - Add UEFI serial console sequences for F1..F10
-
-```ini
-[User keys]
-User1=59,0,$1B[M
-User2=60,0,$1B[N
-User3=61,0,$1B[O
-User4=62,0,$1B[P
-User5=63,0,$1B[Q
-User6=64,0,$1B[R
-User7=65,0,$1B[S
-User8=66,0,$1B[T
-User9=67,0,$1B[U
-User10=68,0,$1B[V
-```
-
-Connect power adapter to Galileo development board, and the logging messages
-should be seen, followed by 5 second countdown, followed by an automatic boot to
-the built-in UEFI Shell.
-
-![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/UefiShell.png)
-
-## **Source Level Debug Using Intel(R) UEFI Development Kit Debugger Tool**
-
-### Pre-requisites
-
-* Intel(R) UEFI Development Kit Debugger Tool User Manual for Ver 1.5 or higher:
- Available from https://firmware.intel.com/develop/intel-uefi-tools-and-utilities/intel-uefi-development-kit-debugger-tool
-* Intel(R) UEFI Development Kit Debugger Tool Ver 1.5 or higher: Available from
- https://firmware.intel.com/develop/intel-uefi-tools-and-utilities/intel-uefi-development-kit-debugger-tool
-* [Tera Term](https://en.osdn.jp/projects/ttssh2/releases/) or other serial
- terminal emulator with TCPIP support
-
-Follow instructions in Intel(R) UEFI Development Kit Debugger Tool User manual
-to setup host system.
-
-Build a firmware image with SOURCE_DEBUG_ENABLE enabled
-(```-D SOURCE_DEBUG_ENABLE```). This will select the appropriate libraries,
-debug agent, and PCDs for Galileo. Galileo does not support a USB 2.0 debug
-port, so only the UART based communications library is used.
-
-Use Dediprog SF100 to update the Galileo development board FLASH image.
-
-Update the ```[Debug Port]``` section of the SoftDebugger.ini file with the host
-side UART configuration settings. The following example uses COM5, which must
-be updated with the COM port the Galileo target is attached. The following
-example also shows a baud rate of 921600 which is correct for a Galileo Gen 2.
-If a Galileo Gen 1 is being used, set the baud rate to 460800. By default, the
-Galileo console is redirected to TCPIP port 20715.
-
-```ini
-[Debug Port]
-Channel = Serial
-Port = COM5
-FlowControl = 0
-BaudRate = 921600
-Server =
-```
-
-Connect power adapter to Galileo development board and run a command script with
-the contents below to start a Tera Term session on TCPIP port 20715 and start
-the Intel(R) UEFI Development Kit Debugger Tool using UART connection between
-the host and target and WinDbg. The REBOOT button on the Galileo development
-board may need to be pressed for the debugger to perform the initial connect.
-
-```cmd
-start "Console" /B "c:\Program Files (x86)\teraterm\ttermpro.exe" localhost:20715 /nossh
-start "Debugger" /B "C:\Program Files (x86)\Intel\Intel(R) UEFI Development Kit Debugger Tool\eXdi.exe" /LaunchWinDbg
-```
-
-The figure below should be seen when a connection is made. The SoftDebugger
-Debug Console window shows the status of the connection between the host and the
-target. The Tera Term window shows the console output from the SEC phase until
-the debug agent is initialized. The WinDbg window shows that the debugger is
-connected and the WinDbg application can be used for run control, breakpoint
-management, and viewing call stacks, local variables, global variables, etc.
-
-![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/UdkDebugger.png)
-
-## **Debug Using Intel(R) System Debugger using OpenOCD**
-
-Setup hardware and software components following the instructions in the article at:
-https://software.intel.com/en-us/articles/using-intel-system-debugger-with-openocd
-
-Connect power adapter to Galileo development board.
-
-The following batch file starts Tera Term serial console on COM5 at 921600 baud,
-starts OpenOCD using a Flyswatter2, and starts Intel(R) System Studio Debugger.
-Select the **Connect** button to complete the host to target connection.
-
-```cmd
-set OPENOCD="C:\Program Files (x86)\IntelSWTools\system_studio_for_windows_2016.0.023\debugger\openocd"
-start "Console" /B "c:\Program Files (x86)\teraterm\ttermpro.exe" /C=5 /BAUD=921600
-start "OpenOcd" /B %OPENOCD%\bin\openocd.exe -f ..\scripts\interface\ftdi\flyswatter2.cfg -f ..\scripts\board\quark_x10xx_board.cfg
-call "C:\Program Files (x86)\IntelSWTools\System Debugger 2016\system_debugger\start_xdb_gdb_remote.bat"
-```
-
-When **Reset Target** is selected, the Galileo development board does not always
-halt at the first instruction at the reset vector. If debug is required from
-the first instruction of the reset vector, then update the file
-```UefiCpuPkg/SecCore/Ia32/ResetVector.asm``` and change the two NOP
-instructions at the label ```ResetHandler:``` to ```JMP $```. This puts the CPU
-into a wait loop until the debugger is connected and the debugger is used to set
-instruction pointer to the next instruction.
-
-```
-;
-; For IA32, the reset vector must be at 0xFFFFFFF0, i.e., 4G-16 byte
-; Execution starts here upon power-on/platform-reset.
-;
-ResetHandler:
-; nop
-; nop
- jmp $
-ApStartup:
- ;
- ; Jmp Rel16 instruction
- ; Use machine code directly in case of the assembler optimization
- ; SEC entry point relative address will be fixed up by some build tool.
- ;
- ; Typically, SEC entry point is the function _ModuleEntryPoint() defined in
- ; SecEntry.asm
- ;
- DB 0e9h
- DW -3
-```
-
-## **Install, Configure, and Boot Linux**
-
-* Download SD Card Linux Image: Available at
- http://www.intel.com/content/www/us/en/support/boards-and-kits/intel-galileo-boards/000005614.html
-* Extract the SD Card Linux Image to a FAT formatted Micro SD FLASH device
-* Install Micro SD FLASH device into Galileo development board
-
-Connect power adapter to Galileo development board and boot to the UEFI Shell.
-
-From the UEFI Shell execute the following commands to copy the GRUB EFI boot
-loader to ```\efi\boot\bootia32.efi```. This allows the UEFI Boot Manager, on
-all future boots, to auto detect that the Micro SD FLASH device is bootable.
-
-```
-Shell> connect -r
-Shell> map -r
-Shell> fs0:
-FS0:> mkdir efi
-FS0:> mkdir efi\boot
-FS0:> cp grub.efi efi\boot\bootia32.efi
-```
-
-The GRUB boot loader is set to a UART baud rate of 115200. A couple changes are
-required to change the baud rate to 460800 for Galileo Gen 1 or 921600 for
-Galileo Gen 2. From the UEFI Shell, execute the following commands to make a
-backup copy and edit the GRUB configuration file.
-
-```
-FS0:> cp boot\grub\grub.conf boot\grub\grub.conf.org
-FS0:> edit boot\grub\grub.conf
-```
-
-* Delete the lines associated with the boot option with the following title.
-
-```
-title Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU
-```
-
-* Replace the two instances of 115200 in the following line to 460800 for
- Galileo Gen 1 or 921600 for Galileo Gen 2.
-
-```
-kernel /bzImage root=/dev/ram0 console=ttyS1,115200n8 earlycon=uart8250,mmio32,$EARLY_CON_ADDR_REPLACE,115200n8 reboot=efi,warm apic=debug rw LABEL=boot debugshell=5 rootimage=image-full-galileo-clanton.ext3
-```
-* Press F3 to save the file
-* Run the ```exit``` command to exit from the UEFI Shell and return to the
- UEFI Boot Manager
-* Select **Boot Manager**
-* Select **UEFI Misc Device** for the Micro SD FLASH device.
-* GRUB should run and Linux should boot with serial log messages.
-* When the serial log messages stop, change the Tera Term baud rate to 115200
-* Login as ```root```. No password is required.
-* Use ```vi``` to edit ```/etc/inittab```
-* Change the baud rate of ttyS1 from 115200 to 460800 for Galileo Gen 1 or
- 921600 for Galileo Gen 2. The line that need to be updated is shown below
-
-```
-S:2345:respawn:/sbin/getty 115200 ttyS1
-```
-
-* Save the updated ```/etc/inittab```
-* Run ```reboot -f``` to shutdown Linux and reboot the platform.
-* Set the Tera Term baud rate back to 460800 for Galileo Gen 1 or 921600 for
- Galileo Gen 2.
-
-After these changes both the EDK II firmware and the Linux operating system use
-the same baud rate.
-
-### **Testing ACPI S3 Sleep**
-
-The ACPI S3 Sleep and Resume feature can be tested on a Galileo development
-board using the Real Time Clock (RTC) for a wake event. The shell script shown
-below arms the RTC wake alarm 10 seconds in the future and puts the system to
-sleep. A shorter time in seconds can be passed in as the first argument to the
-script, but do not use times shorter than 2 or 3 seconds.
-
-**NOTE**: The stmmac module is unloaded because the module is not compatible
-with S3 resume.
-
-```sh
-#
-# Unload NIC driver that causes S3 to fail
-#
-rmmod stmmac
-
-#
-# Disable RTC wake alarm
-#
-echo 0 > /sys/class/rtc/rtc0/wakealarm
-
-#
-# Compute wake time that is $1 seconds in the future
-#
-let WakeTime=`date '+%s'`
-echo $WakeTime
-if ["$1" = ""]; then
- let WakeTime=$WakeTime+10
-else
- let WakeTime=$WakeTime+$1
-fi
-echo $WakeTime
-
-#
-# Enable RTC wake alarm $1 seconds in the future
-#
-echo $WakeTime > /sys/class/rtc/rtc0/wakealarm
-
-#
-# Put systems into ACPI S3 sleep state
-#
-echo mem > /sys/power/state
-```
-
-## **UEFI Secure Boot Feature and Physical Presence**
-
-Build a firmware image with SECURE_BOOT_ENABLE enabled
-(```-D SECURE_BOOT_ENABLE```). This builds in support for UEFI authenticated
-variables, UEFI image verification, and UEFI Secure Boot configuration screens
-in the Device Manager. In order to change the UEFI Secure Boot configuration,
-the user must assert physical presence. The Galileo development board only has
-two push buttons (REBOOT and RESET). The REBOOT button unconditionally reboots
-the platform. The RESET button asserts the reset signal on the Arduino header
-and is also connected to a GPIO pin, so the state of the RESET button can be
-read. The user asserts physical presence by holding the RESET button while the
-Galileo development board boots, or by holding the RESET button while selecting
-the **Secure Boot Configuration** option in the Device Manager.
-
-Use Dediprog SF100 to update the Galileo development board FLASH image.
-
-Connect power adapter to Galileo development board and boot to the UEFI Boot
-Manager by pressing F2 or running the ```exit``` command from the UEFI Shell.
-Select **Device Manager** and then**Secure Boot Configuration**. Change
-**Customize Secure Boot** to **Customized** and then select **Custom Secure Boot
-Options**. If **Custom Secure Boot Options** can not be selected, then physical
-presence was not asserted using one of two methods listed above. Assert
-physical presence and try again.
-
-The **Custom Secure Boot Options** screen allows the Galileo development board
-to be enrolled into UEFI Secure Boot. See [How to Sign UEFI Drivers & Application V1.31](
-http://sourceforge.net/projects/edk2/files/General%20Documentation/SigningUefiImages%20-v1dot31.pdf/download)
-in the [SecurityPkg Wiki](https://github.com/tianocore/tianocore.github.io/wiki/SecurityPkg)
-for details on how to complete the UEFI Secure Boot enrollment.
-
-## **Enable Measured Boot Feature using Atmel I2C TPM on CryptoShield**
-
-Build a firmware image with MEASURED_BOOT_ENABLE enabled
-(```-D MEASURED_BOOT_ENABLE```) and TPM_12_HARDWARE set to ATMEL_I2C
-(```-D TMP_12_HARDWARE=ATMEL_I2C```). This builds in the TCG PEIM and DXE
-modules and uses the library for the Atmel I2C TPM hardware device.
-
-Use Dediprog SF100 to update the Galileo development board FLASH image.
-
-Attach the CryptoShield to the Arduino header of the Galileo development board
-as shown below.
-
-![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/GalileoCryptoShield.jpg)
-
-Connect power adapter to Galileo development board and boot to the UEFI Shell.
-In the boot logging messages, messages similar to the following should be seen
-as the Atmel I2C TPM hardware device is detected and used to measure the
-contents of firmware volumes and firmware tables.
-
-```
-Loading PEIM at 0x0000FC75188 EntryPoint=0x0000FC75260 TrEEConfigPei.efi
-PROGRESS CODE: V03020002 I0
-TrEEConfiguration.TpmDevice from Setup: 1
-DetectTpmDevice:
-TpmDevice final: 1
-TpmDevice PCD: 8B01E5B6-4F19-46E8-AB93-1C53671B90CC
-. . .
-Loading PEIM at 0x0000FC70190 EntryPoint=0x0000FC70260 TcgPei.efi
-PROGRESS CODE: V03020002 I0
-Install PPI: E9DB0D58-D48D-47F6-9C6E-6F40E86C7B41
-Install PPI: A030D115-54DD-447B-9064-F206883D7CCC
-PROGRESS CODE: V03020003 I0
-The FV which is measured by TcgPei starts at: 0xFFF10000
-The FV which is measured by TcgPei has the size: 0xF0000
-The FV which is measured by TcgPei starts at: 0xFFD00000
-The FV which is measured by TcgPei has the size: 0x1E0000
-. . .
-Loading driver at 0x0000F620000 EntryPoint=0x0000F620260 TcgDxe.efi
-. . .
-TPM TcgDxe Measure Data when ReadyToBoot
-```
-See the [SecurityPkg Wiki](https://github.com/tianocore/tianocore.github.io/wiki/SecurityPkg)
-for additional details on EDK II TPM support
-
-## **Measuring Boot Performance**
-
-Build a firmware image with PERFORMANCE_ENABLE enabled
-(```-D PERFORMANCE_ENABLE```). This builds in the UEFI Shell and the DP.EFI
-(Dump Performance) into a firmware volume and also includes a simple file system
-driver for firmware volumes so the DP.EFI command can be run out of the FLASH.
-
-Use Dediprog SF100 to update the Galileo development board FLASH image.
-
-Connect power adapter to Galileo development board and let it boot to the UEFI
-Shell. Then use the REBOOT button or the ```reset``` UEFI Shell command to
-reboot the Galileo development board. The first boot after a FLASH update does
-extra work that is only performed one time. In order to get correct performance
-measurements, use the 2nd or later boots. After the 2nd boot, run the
-```dp -s``` command. The output should look similar to the figure below.
-
-![](https://github.com/tianocore/tianocore.github.io/wiki/Projects/QuarkPlatformPkg/Images/DpCommand.png)
|