diff options
Diffstat (limited to 'Omap35xxPkg/MmcHostDxe/MmcHostDxe.c')
-rw-r--r-- | Omap35xxPkg/MmcHostDxe/MmcHostDxe.c | 671 |
1 files changed, 0 insertions, 671 deletions
diff --git a/Omap35xxPkg/MmcHostDxe/MmcHostDxe.c b/Omap35xxPkg/MmcHostDxe/MmcHostDxe.c deleted file mode 100644 index 410fed9..0000000 --- a/Omap35xxPkg/MmcHostDxe/MmcHostDxe.c +++ /dev/null @@ -1,671 +0,0 @@ -/** @file
-*
-* Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-* Copyright (c) 2011 - 2014, ARM Limited. All rights reserved.
-*
-* SPDX-License-Identifier: BSD-2-Clause-Patent
-*
-**/
-
-#include "MmcHostDxe.h"
-
-EMBEDDED_EXTERNAL_DEVICE *gTPS65950;
-UINT8 mMaxDataTransferRate = 0;
-UINT32 mRca = 0;
-BOOLEAN mBitModeSet = FALSE;
-
-
-typedef struct {
- VENDOR_DEVICE_PATH Mmc;
- EFI_DEVICE_PATH End;
-} MMCHS_DEVICE_PATH;
-
-MMCHS_DEVICE_PATH gMMCDevicePath = {
- {
- {
- HARDWARE_DEVICE_PATH,
- HW_VENDOR_DP,
- { (UINT8)(sizeof(VENDOR_DEVICE_PATH)), (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8) },
- },
- { 0xb615f1f5, 0x5088, 0x43cd, { 0x80, 0x9c, 0xa1, 0x6e, 0x52, 0x48, 0x7d, 0x00 } }
- },
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
- }
-};
-
-BOOLEAN
-IgnoreCommand (
- UINT32 Command
- )
-{
- switch(Command) {
- case MMC_CMD12:
- return TRUE;
- case MMC_CMD13:
- return TRUE;
- default:
- return FALSE;
- }
-}
-
-UINT32
-TranslateCommand (
- UINT32 Command
- )
-{
- UINT32 Translation;
-
- switch(Command) {
- case MMC_CMD2:
- Translation = CMD2;
- break;
- case MMC_CMD3:
- Translation = CMD3;
- break;
- /*case MMC_CMD6:
- Translation = CMD6;
- break;*/
- case MMC_CMD7:
- Translation = CMD7;
- break;
- case MMC_CMD8:
- Translation = CMD8;
- break;
- case MMC_CMD9:
- Translation = CMD9;
- break;
- /*case MMC_CMD12:
- Translation = CMD12;
- break;
- case MMC_CMD13:
- Translation = CMD13;
- break;*/
- case MMC_CMD16:
- Translation = CMD16;
- break;
- case MMC_CMD17:
- Translation = 0x113A0014;//CMD17;
- break;
- case MMC_CMD24:
- Translation = CMD24 | 4;
- break;
- case MMC_CMD55:
- Translation = CMD55;
- break;
- case MMC_ACMD41:
- Translation = ACMD41;
- break;
- default:
- Translation = Command;
- }
-
- return Translation;
-}
-
-VOID
-CalculateCardCLKD (
- UINTN *ClockFrequencySelect
- )
-{
- UINTN TransferRateValue = 0;
- UINTN TimeValue = 0 ;
- UINTN Frequency = 0;
-
- DEBUG ((DEBUG_BLKIO, "CalculateCardCLKD()\n"));
-
- // For SD Cards we would need to send CMD6 to set
- // speeds abouve 25MHz. High Speed mode 50 MHz and up
-
- // Calculate Transfer rate unit (Bits 2:0 of TRAN_SPEED)
- switch (mMaxDataTransferRate & 0x7) { // 2
- case 0:
- TransferRateValue = 100 * 1000;
- break;
-
- case 1:
- TransferRateValue = 1 * 1000 * 1000;
- break;
-
- case 2:
- TransferRateValue = 10 * 1000 * 1000;
- break;
-
- case 3:
- TransferRateValue = 100 * 1000 * 1000;
- break;
-
- default:
- DEBUG ((DEBUG_BLKIO, "Invalid parameter.\n"));
- ASSERT(FALSE);
- return;
- }
-
- //Calculate Time value (Bits 6:3 of TRAN_SPEED)
- switch ((mMaxDataTransferRate >> 3) & 0xF) { // 6
- case 1:
- TimeValue = 10;
- break;
-
- case 2:
- TimeValue = 12;
- break;
-
- case 3:
- TimeValue = 13;
- break;
-
- case 4:
- TimeValue = 15;
- break;
-
- case 5:
- TimeValue = 20;
- break;
-
- case 6:
- TimeValue = 25;
- break;
-
- case 7:
- TimeValue = 30;
- break;
-
- case 8:
- TimeValue = 35;
- break;
-
- case 9:
- TimeValue = 40;
- break;
-
- case 10:
- TimeValue = 45;
- break;
-
- case 11:
- TimeValue = 50;
- break;
-
- case 12:
- TimeValue = 55;
- break;
-
- case 13:
- TimeValue = 60;
- break;
-
- case 14:
- TimeValue = 70;
- break;
-
- case 15:
- TimeValue = 80;
- break;
-
- default:
- DEBUG ((DEBUG_BLKIO, "Invalid parameter.\n"));
- ASSERT(FALSE);
- return;
- }
-
- Frequency = TransferRateValue * TimeValue/10;
-
- // Calculate Clock divider value to program in MMCHS_SYSCTL[CLKD] field.
- *ClockFrequencySelect = ((MMC_REFERENCE_CLK/Frequency) + 1);
-
- DEBUG ((DEBUG_BLKIO, "mMaxDataTransferRate: 0x%x, Frequency: %d KHz, ClockFrequencySelect: %x\n", mMaxDataTransferRate, Frequency/1000, *ClockFrequencySelect));
-}
-
-VOID
-UpdateMMCHSClkFrequency (
- UINTN NewCLKD
- )
-{
- DEBUG ((DEBUG_BLKIO, "UpdateMMCHSClkFrequency()\n"));
-
- // Set Clock enable to 0x0 to not provide the clock to the card
- MmioAnd32 (MMCHS_SYSCTL, ~CEN);
-
- // Set new clock frequency.
- MmioAndThenOr32 (MMCHS_SYSCTL, ~CLKD_MASK, NewCLKD << 6);
-
- // Poll till Internal Clock Stable
- while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);
-
- // Set Clock enable to 0x1 to provide the clock to the card
- MmioOr32 (MMCHS_SYSCTL, CEN);
-}
-
-EFI_STATUS
-InitializeMMCHS (
- VOID
- )
-{
- UINT8 Data;
- EFI_STATUS Status;
-
- DEBUG ((DEBUG_BLKIO, "InitializeMMCHS()\n"));
-
- // Select Device group to belong to P1 device group in Power IC.
- Data = DEV_GRP_P1;
- Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEV_GRP), 1, &Data);
- ASSERT_EFI_ERROR(Status);
-
- // Configure voltage regulator for MMC1 in Power IC to output 3.0 voltage.
- Data = VSEL_3_00V;
- Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEDICATED_REG), 1, &Data);
- ASSERT_EFI_ERROR(Status);
-
- // After ramping up voltage, set VDDS stable bit to indicate that voltage level is stable.
- MmioOr32 (CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1));
-
- // Enable WP GPIO
- MmioAndThenOr32 (GPIO1_BASE + GPIO_OE, ~BIT23, BIT23);
-
- // Enable Card Detect
- Data = CARD_DETECT_ENABLE;
- gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, TPS65950_GPIO_CTRL), 1, &Data);
-
- return Status;
-}
-
-BOOLEAN
-MMCIsCardPresent (
- IN EFI_MMC_HOST_PROTOCOL *This
- )
-{
- EFI_STATUS Status;
- UINT8 Data;
-
- //
- // Card detect is a GPIO0 on the TPS65950
- //
- Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATAIN1), 1, &Data);
- if (EFI_ERROR (Status)) {
- return FALSE;
- }
-
- return !(Data & CARD_DETECT_BIT);
-}
-
-BOOLEAN
-MMCIsReadOnly (
- IN EFI_MMC_HOST_PROTOCOL *This
- )
-{
- /* Note:
- * On our BeagleBoard the SD card WP pin is always read as TRUE.
- * Probably something wrong with GPIO configuration.
- * BeagleBoard-xM uses microSD cards so there is no write protect at all.
- * Hence commenting out SD card WP pin read status.
- */
- //return (MmioRead32 (GPIO1_BASE + GPIO_DATAIN) & BIT23) == BIT23;
- return 0;
-
-}
-
-// TODO
-EFI_GUID mPL180MciDevicePathGuid = EFI_CALLER_ID_GUID;
-
-EFI_STATUS
-MMCBuildDevicePath (
- IN EFI_MMC_HOST_PROTOCOL *This,
- IN EFI_DEVICE_PATH_PROTOCOL **DevicePath
- )
-{
- EFI_DEVICE_PATH_PROTOCOL *NewDevicePathNode;
-
- NewDevicePathNode = CreateDeviceNode(HARDWARE_DEVICE_PATH,HW_VENDOR_DP,sizeof(VENDOR_DEVICE_PATH));
- CopyGuid(&((VENDOR_DEVICE_PATH*)NewDevicePathNode)->Guid,&mPL180MciDevicePathGuid);
- *DevicePath = NewDevicePathNode;
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-MMCSendCommand (
- IN EFI_MMC_HOST_PROTOCOL *This,
- IN MMC_CMD MmcCmd,
- IN UINT32 Argument
- )
-{
- UINTN MmcStatus;
- UINTN RetryCount = 0;
-
- if (IgnoreCommand(MmcCmd))
- return EFI_SUCCESS;
-
- MmcCmd = TranslateCommand(MmcCmd);
-
- //DEBUG ((EFI_D_ERROR, "MMCSendCommand(%d)\n", MmcCmd));
-
- // Check if command line is in use or not. Poll till command line is available.
- while ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED);
-
- // Provide the block size.
- MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);
-
- // Setting Data timeout counter value to max value.
- MmioAndThenOr32 (MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL);
-
- // Clear Status register.
- MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF);
-
- // Set command argument register
- MmioWrite32 (MMCHS_ARG, Argument);
-
- //TODO: fix this
- //Enable interrupt enable events to occur
- //MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal);
-
- // Send a command
- MmioWrite32 (MMCHS_CMD, MmcCmd);
-
- // Check for the command status.
- while (RetryCount < MAX_RETRY_COUNT) {
- do {
- MmcStatus = MmioRead32 (MMCHS_STAT);
- } while (MmcStatus == 0);
-
- // Read status of command response
- if ((MmcStatus & ERRI) != 0) {
-
- // Perform soft-reset for mmci_cmd line.
- MmioOr32 (MMCHS_SYSCTL, SRC);
- while ((MmioRead32 (MMCHS_SYSCTL) & SRC));
-
- //DEBUG ((EFI_D_INFO, "MmcStatus: 0x%x\n", MmcStatus));
- return EFI_DEVICE_ERROR;
- }
-
- // Check if command is completed.
- if ((MmcStatus & CC) == CC) {
- MmioWrite32 (MMCHS_STAT, CC);
- break;
- }
-
- RetryCount++;
- }
-
- if (RetryCount == MAX_RETRY_COUNT) {
- DEBUG ((DEBUG_BLKIO, "MMCSendCommand: Timeout\n"));
- return EFI_TIMEOUT;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-MMCNotifyState (
- IN EFI_MMC_HOST_PROTOCOL *This,
- IN MMC_STATE State
- )
-{
- EFI_STATUS Status;
- UINTN FreqSel;
-
- switch(State) {
- case MmcInvalidState:
- ASSERT(0);
- break;
- case MmcHwInitializationState:
- mBitModeSet = FALSE;
-
- DEBUG ((DEBUG_BLKIO, "MMCHwInitializationState()\n"));
- Status = InitializeMMCHS ();
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_BLKIO, "Initialize MMC host controller fails. Status: %x\n", Status));
- return Status;
- }
-
- // Software reset of the MMCHS host controller.
- MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET);
- gBS->Stall(1000);
- while ((MmioRead32 (MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE);
-
- // Soft reset for all.
- MmioWrite32 (MMCHS_SYSCTL, SRA);
- gBS->Stall(1000);
- while ((MmioRead32 (MMCHS_SYSCTL) & SRA) != 0x0);
-
- //Voltage capabilities initialization. Activate VS18 and VS30.
- MmioOr32 (MMCHS_CAPA, (VS30 | VS18));
-
- // Wakeup configuration
- MmioOr32 (MMCHS_SYSCONFIG, ENAWAKEUP);
- MmioOr32 (MMCHS_HCTL, IWE);
-
- // MMCHS Controller default initialization
- MmioOr32 (MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF));
-
- MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF));
-
- // Enable internal clock
- MmioOr32 (MMCHS_SYSCTL, ICE);
-
- // Set the clock frequency to 80KHz.
- UpdateMMCHSClkFrequency (CLKD_80KHZ);
-
- // Enable SD bus power.
- MmioOr32 (MMCHS_HCTL, (SDBP_ON));
-
- // Poll till SD bus power bit is set.
- while ((MmioRead32 (MMCHS_HCTL) & SDBP_MASK) != SDBP_ON);
-
- // Enable interrupts.
- MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN |
- CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN));
-
- // Controller INIT procedure start.
- MmioOr32 (MMCHS_CON, INIT);
- MmioWrite32 (MMCHS_CMD, 0x00000000);
- while (!(MmioRead32 (MMCHS_STAT) & CC));
-
- // Wait for 1 ms
- gBS->Stall (1000);
-
- // Set CC bit to 0x1 to clear the flag
- MmioOr32 (MMCHS_STAT, CC);
-
- // Retry INIT procedure.
- MmioWrite32 (MMCHS_CMD, 0x00000000);
- while (!(MmioRead32 (MMCHS_STAT) & CC));
-
- // End initialization sequence
- MmioAnd32 (MMCHS_CON, ~INIT);
-
- MmioOr32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON));
-
- // Change clock frequency to 400KHz to fit protocol
- UpdateMMCHSClkFrequency(CLKD_400KHZ);
-
- MmioOr32 (MMCHS_CON, OD);
- break;
- case MmcIdleState:
- break;
- case MmcReadyState:
- break;
- case MmcIdentificationState:
- break;
- case MmcStandByState:
- CalculateCardCLKD (&FreqSel);
- UpdateMMCHSClkFrequency (FreqSel);
- break;
- case MmcTransferState:
- if (!mBitModeSet) {
- Status = MMCSendCommand (This, CMD55, mRca << 16);
- if (!EFI_ERROR (Status)) {
- // Set device into 4-bit data bus mode
- Status = MMCSendCommand (This, ACMD6, 0x2);
- if (!EFI_ERROR (Status)) {
- // Set host controler into 4-bit mode
- MmioOr32 (MMCHS_HCTL, DTW_4_BIT);
- DEBUG ((DEBUG_BLKIO, "SD Memory Card set to 4-bit mode\n"));
- mBitModeSet = TRUE;
- }
- }
- }
- break;
- case MmcSendingDataState:
- break;
- case MmcReceiveDataState:
- break;
- case MmcProgrammingState:
- break;
- case MmcDisconnectState:
- default:
- ASSERT(0);
- }
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-MMCReceiveResponse (
- IN EFI_MMC_HOST_PROTOCOL *This,
- IN MMC_RESPONSE_TYPE Type,
- IN UINT32* Buffer
- )
-{
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Type == MMC_RESPONSE_TYPE_R2) {
- Buffer[0] = MmioRead32 (MMCHS_RSP10);
- Buffer[1] = MmioRead32 (MMCHS_RSP32);
- Buffer[2] = MmioRead32 (MMCHS_RSP54);
- Buffer[3] = MmioRead32 (MMCHS_RSP76);
- } else {
- Buffer[0] = MmioRead32 (MMCHS_RSP10);
- }
-
- if (Type == MMC_RESPONSE_TYPE_CSD) {
- mMaxDataTransferRate = Buffer[3] & 0xFF;
- } else if (Type == MMC_RESPONSE_TYPE_RCA) {
- mRca = Buffer[0] >> 16;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-MMCReadBlockData (
- IN EFI_MMC_HOST_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Length,
- IN UINT32* Buffer
- )
-{
- UINTN MmcStatus;
- UINTN Count;
- UINTN RetryCount = 0;
-
- DEBUG ((DEBUG_BLKIO, "MMCReadBlockData(LBA: 0x%x, Length: 0x%x, Buffer: 0x%x)\n", Lba, Length, Buffer));
-
- // Check controller status to make sure there is no error.
- while (RetryCount < MAX_RETRY_COUNT) {
- do {
- // Read Status.
- MmcStatus = MmioRead32 (MMCHS_STAT);
- } while(MmcStatus == 0);
-
- // Check if Buffer read ready (BRR) bit is set?
- if (MmcStatus & BRR) {
-
- // Clear BRR bit
- MmioOr32 (MMCHS_STAT, BRR);
-
- for (Count = 0; Count < Length / 4; Count++) {
- *Buffer++ = MmioRead32(MMCHS_DATA);
- }
- break;
- }
- RetryCount++;
- }
-
- if (RetryCount == MAX_RETRY_COUNT) {
- return EFI_TIMEOUT;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-MMCWriteBlockData (
- IN EFI_MMC_HOST_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Length,
- IN UINT32* Buffer
- )
-{
- UINTN MmcStatus;
- UINTN Count;
- UINTN RetryCount = 0;
-
- // Check controller status to make sure there is no error.
- while (RetryCount < MAX_RETRY_COUNT) {
- do {
- // Read Status.
- MmcStatus = MmioRead32 (MMCHS_STAT);
- } while(MmcStatus == 0);
-
- // Check if Buffer write ready (BWR) bit is set?
- if (MmcStatus & BWR) {
-
- // Clear BWR bit
- MmioOr32 (MMCHS_STAT, BWR);
-
- // Write block worth of data.
- for (Count = 0; Count < Length / 4; Count++) {
- MmioWrite32 (MMCHS_DATA, *Buffer++);
- }
-
- break;
- }
- RetryCount++;
- }
-
- if (RetryCount == MAX_RETRY_COUNT) {
- return EFI_TIMEOUT;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_MMC_HOST_PROTOCOL gMMCHost = {
- MMC_HOST_PROTOCOL_REVISION,
- MMCIsCardPresent,
- MMCIsReadOnly,
- MMCBuildDevicePath,
- MMCNotifyState,
- MMCSendCommand,
- MMCReceiveResponse,
- MMCReadBlockData,
- MMCWriteBlockData
-};
-
-EFI_STATUS
-MMCInitialize (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
- EFI_HANDLE Handle = NULL;
-
- DEBUG ((DEBUG_BLKIO, "MMCInitialize()\n"));
-
- Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
- ASSERT_EFI_ERROR(Status);
-
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Handle,
- &gEfiMmcHostProtocolGuid, &gMMCHost,
- NULL
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
|