diff options
Diffstat (limited to 'MdeModulePkg/Universal/Network/SnpDxe')
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/ComponentName.c | 28 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Initialize.c | 36 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Mcast_ip_to_mac.c | 40 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Nvdata.c | 62 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Receive_filters.c | 100 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Reset.c | 24 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Shutdown.c | 24 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Snp.c | 6 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf | 14 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.uni | 4 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/SnpDxeExtra.uni | 6 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Start.c | 18 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Station_address.c | 40 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Stop.c | 30 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/Transmit.c | 54 | ||||
| -rw-r--r-- | MdeModulePkg/Universal/Network/SnpDxe/WaitForPacket.c | 10 |
16 files changed, 248 insertions, 248 deletions
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/ComponentName.c b/MdeModulePkg/Universal/Network/SnpDxe/ComponentName.c index d8b8184..a366574 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/ComponentName.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/ComponentName.c @@ -1,11 +1,11 @@ /** @file
UEFI Component Name(2) protocol implementation for SnpDxe driver.
-Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -238,10 +238,10 @@ SimpleNetworkComponentNameGetDriverName ( @param Snp[in] A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL.
-
+
@retval EFI_SUCCESS Update the ControllerNameTable of this instance successfully.
@retval EFI_INVALID_PARAMETER The input parameter is invalid.
-
+
**/
EFI_STATUS
UpdateName (
@@ -285,7 +285,7 @@ UpdateName ( FreeUnicodeStringTable (gSimpleNetworkControllerNameTable);
gSimpleNetworkControllerNameTable = NULL;
}
-
+
Status = AddUnicodeString2 (
"eng",
gSimpleNetworkComponentName.SupportedLanguages,
@@ -296,7 +296,7 @@ UpdateName ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
return AddUnicodeString2 (
"en",
gSimpleNetworkComponentName2.SupportedLanguages,
@@ -317,8 +317,8 @@ UpdateName ( and EFI_SUCCESS is returned. If the driver specified by This is not currently
managing the controller specified by ControllerHandle and ChildHandle,
then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
- Currently not implemented.
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+ Currently not implemented.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@@ -387,7 +387,7 @@ SimpleNetworkComponentNameGetControllerName ( {
EFI_STATUS Status;
EFI_SIMPLE_NETWORK_PROTOCOL *Snp;
-
+
if (ChildHandle != NULL) {
return EFI_UNSUPPORTED;
}
@@ -404,9 +404,9 @@ SimpleNetworkComponentNameGetControllerName ( return Status;
}
- //
+ //
// Retrieve an instance of a produced protocol from ControllerHandle
- //
+ //
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiSimpleNetworkProtocolGuid,
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Initialize.c b/MdeModulePkg/Universal/Network/SnpDxe/Initialize.c index 63bdf92..a978913 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Initialize.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Initialize.c @@ -1,11 +1,11 @@ /** @file
- Implementation of initializing a network adapter.
+ Implementation of initializing a network adapter.
-Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -19,9 +19,9 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Call UNDI to initialize the interface.
@param Snp Pointer to snp driver structure.
- @param CableDetectFlag Do/don't detect the cable (depending on what
+ @param CableDetectFlag Do/don't detect the cable (depending on what
undi supports).
-
+
@retval EFI_SUCCESS UNDI is initialized successfully.
@retval EFI_DEVICE_ERROR UNDI could not be initialized.
@retval Other Other errors as indicated.
@@ -103,17 +103,17 @@ PxeInit ( //
// There are two fields need to be checked here:
- // First is the upper two bits (14 & 15) in the CDB.StatFlags field. Until these bits change to report
+ // First is the upper two bits (14 & 15) in the CDB.StatFlags field. Until these bits change to report
// PXE_STATFLAGS_COMMAND_COMPLETE or PXE_STATFLAGS_COMMAND_FAILED, the command has not been executed by the UNDI.
- // Second is the CDB.StatCode field. After command execution completes, either successfully or not,
+ // Second is the CDB.StatCode field. After command execution completes, either successfully or not,
// the CDB.StatCode field contains the result of the command execution.
//
if ((((Snp->Cdb.StatFlags) & PXE_STATFLAGS_STATUS_MASK) == PXE_STATFLAGS_COMMAND_COMPLETE) &&
(Snp->Cdb.StatCode == PXE_STATCODE_SUCCESS)) {
//
- // If cable detect feature is enabled in CDB.OpFlags, check the CDB.StatFlags to see if there is an
- // active connection to this network device. If the no media StatFlag is set, the UNDI and network
- // device are still initialized.
+ // If cable detect feature is enabled in CDB.OpFlags, check the CDB.StatFlags to see if there is an
+ // active connection to this network device. If the no media StatFlag is set, the UNDI and network
+ // device are still initialized.
//
if (CableDetectFlag == PXE_OPFLAGS_INITIALIZE_DETECT_CABLE) {
if(((Snp->Cdb.StatFlags) & PXE_STATFLAGS_INITIALIZED_NO_MEDIA) != PXE_STATFLAGS_INITIALIZED_NO_MEDIA) {
@@ -122,7 +122,7 @@ PxeInit ( Snp->Mode.MediaPresent = FALSE;
}
}
-
+
Snp->Mode.State = EfiSimpleNetworkInitialized;
Status = EFI_SUCCESS;
} else {
@@ -151,8 +151,8 @@ PxeInit ( /**
- Resets a network adapter and allocates the transmit and receive buffers
- required by the network interface; optionally, also requests allocation of
+ Resets a network adapter and allocates the transmit and receive buffers
+ required by the network interface; optionally, also requests allocation of
additional transmit and receive buffers.
This function allocates the transmit and receive buffers required by the network
@@ -164,8 +164,8 @@ PxeInit ( @param ExtraRxBufferSize The size, in bytes, of the extra receive buffer space
that the driver should allocate for the network interface.
- Some network interfaces will not be able to use the
- extra buffer, and the caller will not know if it is
+ Some network interfaces will not be able to use the
+ extra buffer, and the caller will not know if it is
actually being used.
@param ExtraTxBufferSize The size, in bytes, of the extra transmit buffer space
that the driver should allocate for the network interface.
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Mcast_ip_to_mac.c b/MdeModulePkg/Universal/Network/SnpDxe/Mcast_ip_to_mac.c index 23dba90..8b2ede2 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Mcast_ip_to_mac.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Mcast_ip_to_mac.c @@ -1,12 +1,12 @@ /** @file
- Implementation of converting an multicast IP address to multicast HW MAC
- address.
-
-Copyright (c) 2004 - 2007, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+ Implementation of converting an multicast IP address to multicast HW MAC
+ address.
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -23,11 +23,11 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. @param IP Multicast IP address.
@param MAC Pointer to hold the return MAC address.
- @retval EFI_SUCCESS The multicast IP address was mapped to the
+ @retval EFI_SUCCESS The multicast IP address was mapped to the
multicast HW MAC address.
- @retval EFI_INVALID_PARAMETER Invalid UNDI command.
- @retval EFI_UNSUPPORTED Command is not supported by UNDI.
- @retval EFI_DEVICE_ERROR Fail to execute UNDI command.
+ @retval EFI_INVALID_PARAMETER Invalid UNDI command.
+ @retval EFI_UNSUPPORTED Command is not supported by UNDI.
+ @retval EFI_DEVICE_ERROR Fail to execute UNDI command.
**/
EFI_STATUS
@@ -103,29 +103,29 @@ PxeIp2Mac ( /**
Converts a multicast IP address to a multicast HW MAC address.
-
- This function converts a multicast IP address to a multicast HW MAC address
+
+ This function converts a multicast IP address to a multicast HW MAC address
for all packet transactions. If the mapping is accepted, then EFI_SUCCESS will
be returned.
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
@param IPv6 Set to TRUE if the multicast IP address is IPv6 [RFC 2460].
- Set to FALSE if the multicast IP address is IPv4 [RFC 791].
- @param IP The multicast IP address that is to be converted to a multicast
+ Set to FALSE if the multicast IP address is IPv4 [RFC 791].
+ @param IP The multicast IP address that is to be converted to a multicast
HW MAC address.
@param MAC The multicast HW MAC address that is to be generated from IP.
@retval EFI_SUCCESS The multicast IP address was mapped to the
multicast HW MAC address.
- @retval EFI_NOT_STARTED The Simple Network Protocol interface has not
+ @retval EFI_NOT_STARTED The Simple Network Protocol interface has not
been started by calling Start().
@retval EFI_INVALID_PARAMETER IP is NULL.
@retval EFI_INVALID_PARAMETER MAC is NULL.
- @retval EFI_INVALID_PARAMETER IP does not point to a valid IPv4 or IPv6
+ @retval EFI_INVALID_PARAMETER IP does not point to a valid IPv4 or IPv6
multicast address.
- @retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ @retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
been initialized by calling Initialize().
- @retval EFI_UNSUPPORTED IPv6 is TRUE and the implementation does not
+ @retval EFI_UNSUPPORTED IPv6 is TRUE and the implementation does not
support IPv6 multicast to MAC address conversion.
**/
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Nvdata.c b/MdeModulePkg/Universal/Network/SnpDxe/Nvdata.c index 4439790..721b34a 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Nvdata.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Nvdata.c @@ -1,12 +1,12 @@ /** @file
- Implementation of reading and writing operations on the NVRAM device
- attached to a network interface.
-
-Copyright (c) 2004 - 2009, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+ Implementation of reading and writing operations on the NVRAM device
+ attached to a network interface.
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -97,51 +97,51 @@ PxeNvDataRead ( /**
- Performs read and write operations on the NVRAM device attached to a network
+ Performs read and write operations on the NVRAM device attached to a network
interface.
-
- This function performs read and write operations on the NVRAM device attached
+
+ This function performs read and write operations on the NVRAM device attached
to a network interface. If ReadWrite is TRUE, a read operation is performed.
- If ReadWrite is FALSE, a write operation is performed. Offset specifies the
- byte offset at which to start either operation. Offset must be a multiple of
- NvRamAccessSize , and it must have a value between zero and NvRamSize.
+ If ReadWrite is FALSE, a write operation is performed. Offset specifies the
+ byte offset at which to start either operation. Offset must be a multiple of
+ NvRamAccessSize , and it must have a value between zero and NvRamSize.
BufferSize specifies the length of the read or write operation. BufferSize must
also be a multiple of NvRamAccessSize, and Offset + BufferSize must not exceed
- NvRamSize.
- If any of the above conditions is not met, then EFI_INVALID_PARAMETER will be
- returned.
- If all the conditions are met and the operation is "read," the NVRAM device
- attached to the network interface will be read into Buffer and EFI_SUCCESS
+ NvRamSize.
+ If any of the above conditions is not met, then EFI_INVALID_PARAMETER will be
+ returned.
+ If all the conditions are met and the operation is "read," the NVRAM device
+ attached to the network interface will be read into Buffer and EFI_SUCCESS
will be returned. If this is a write operation, the contents of Buffer will be
- used to update the contents of the NVRAM device attached to the network
+ used to update the contents of the NVRAM device attached to the network
interface and EFI_SUCCESS will be returned.
-
+
It does the basic checking on the input parameters and retrieves snp structure
and then calls the read_nvdata() call which does the actual reading
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
@param ReadWrite TRUE for read operations, FALSE for write operations.
- @param Offset Byte offset in the NVRAM device at which to start the read or
- write operation. This must be a multiple of NvRamAccessSize
- and less than NvRamSize. (See EFI_SIMPLE_NETWORK_MODE)
- @param BufferSize The number of bytes to read or write from the NVRAM device.
+ @param Offset Byte offset in the NVRAM device at which to start the read or
+ write operation. This must be a multiple of NvRamAccessSize
+ and less than NvRamSize. (See EFI_SIMPLE_NETWORK_MODE)
+ @param BufferSize The number of bytes to read or write from the NVRAM device.
This must also be a multiple of NvramAccessSize.
@param Buffer A pointer to the data buffer.
@retval EFI_SUCCESS The NVRAM access was performed.
@retval EFI_NOT_STARTED The network interface has not been started.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- * The This parameter is NULL
- * The This parameter does not point to a valid
+ * The This parameter is NULL
+ * The This parameter does not point to a valid
EFI_SIMPLE_NETWORK_PROTOCOL structure
- * The Offset parameter is not a multiple of
+ * The Offset parameter is not a multiple of
EFI_SIMPLE_NETWORK_MODE.NvRamAccessSize
- * The Offset parameter is not less than
+ * The Offset parameter is not less than
EFI_SIMPLE_NETWORK_MODE.NvRamSize
- * The BufferSize parameter is not a multiple of
+ * The BufferSize parameter is not a multiple of
EFI_SIMPLE_NETWORK_MODE.NvRamAccessSize
* The Buffer parameter is NULL
- @retval EFI_DEVICE_ERROR The command could not be sent to the network
+ @retval EFI_DEVICE_ERROR The command could not be sent to the network
interface.
@retval EFI_UNSUPPORTED This function is not supported by the network
interface.
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Receive_filters.c b/MdeModulePkg/Universal/Network/SnpDxe/Receive_filters.c index c37018c..3b2c27d 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Receive_filters.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Receive_filters.c @@ -2,11 +2,11 @@ Implementation of managing the multicast receive filters of a network
interface.
-Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed and made available under the
-terms and conditions of the BSD License which accompanies this distribution. The
-full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed and made available under the
+terms and conditions of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -24,8 +24,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. @param EnableFlags Bit mask for enabling the receive filters.
@param MCastAddressCount Multicast address count for a new multicast address
list.
- @param MCastAddressList List of new multicast addresses.
-
+ @param MCastAddressList List of new multicast addresses.
+
@retval EFI_SUCCESS The multicast receive filter list was updated.
@retval EFI_INVALID_PARAMETER Invalid UNDI command.
@retval EFI_UNSUPPORTED Command is not supported by UNDI.
@@ -115,13 +115,13 @@ PxeRecvFilterEnable ( @param Snp Pointer to snp driver structure
@param DisableFlags Bit mask for disabling the receive filters
- @param ResetMCastList Boolean flag to reset/delete the multicast filter
+ @param ResetMCastList Boolean flag to reset/delete the multicast filter
list.
@retval EFI_SUCCESS The multicast receive filter list was updated.
@retval EFI_DEVICE_ERROR Fail to execute UNDI command.
-
-**/
+
+**/
EFI_STATUS
PxeRecvFilterDisable (
SNP_DRIVER *Snp,
@@ -194,8 +194,8 @@ PxeRecvFilterDisable ( @param Snp Pointer to snp driver structure.
@retval EFI_SUCCESS The receive filter was read.
- @retval EFI_DEVICE_ERROR Fail to execute UNDI command.
-
+ @retval EFI_DEVICE_ERROR Fail to execute UNDI command.
+
**/
EFI_STATUS
PxeRecvFilterRead (
@@ -291,70 +291,70 @@ PxeRecvFilterRead ( /**
Manages the multicast receive filters of a network interface.
-
- This function is used enable and disable the hardware and software receive
+
+ This function is used enable and disable the hardware and software receive
filters for the underlying network device.
- The receive filter change is broken down into three steps:
- * The filter mask bits that are set (ON) in the Enable parameter are added to
- the current receive filter settings.
+ The receive filter change is broken down into three steps:
+ * The filter mask bits that are set (ON) in the Enable parameter are added to
+ the current receive filter settings.
* The filter mask bits that are set (ON) in the Disable parameter are subtracted
from the updated receive filter settings.
* If the resulting receive filter setting is not supported by the hardware a
more liberal setting is selected.
- If the same bits are set in the Enable and Disable parameters, then the bits
+ If the same bits are set in the Enable and Disable parameters, then the bits
in the Disable parameter takes precedence.
- If the ResetMCastFilter parameter is TRUE, then the multicast address list
- filter is disabled (irregardless of what other multicast bits are set in the
- Enable and Disable parameters). The SNP->Mode->MCastFilterCount field is set
+ If the ResetMCastFilter parameter is TRUE, then the multicast address list
+ filter is disabled (irregardless of what other multicast bits are set in the
+ Enable and Disable parameters). The SNP->Mode->MCastFilterCount field is set
to zero. The Snp->Mode->MCastFilter contents are undefined.
- After enabling or disabling receive filter settings, software should verify
- the new settings by checking the Snp->Mode->ReceiveFilterSettings,
+ After enabling or disabling receive filter settings, software should verify
+ the new settings by checking the Snp->Mode->ReceiveFilterSettings,
Snp->Mode->MCastFilterCount and Snp->Mode->MCastFilter fields.
- Note: Some network drivers and/or devices will automatically promote receive
+ Note: Some network drivers and/or devices will automatically promote receive
filter settings if the requested setting can not be honored. For example, if
- a request for four multicast addresses is made and the underlying hardware
- only supports two multicast addresses the driver might set the promiscuous
+ a request for four multicast addresses is made and the underlying hardware
+ only supports two multicast addresses the driver might set the promiscuous
or promiscuous multicast receive filters instead. The receiving software is
- responsible for discarding any extra packets that get through the hardware
+ responsible for discarding any extra packets that get through the hardware
receive filters.
- Note: Note: To disable all receive filter hardware, the network driver must
+ Note: Note: To disable all receive filter hardware, the network driver must
be Shutdown() and Stopped(). Calling ReceiveFilters() with Disable set to
- Snp->Mode->ReceiveFilterSettings will make it so no more packets are
- returned by the Receive() function, but the receive hardware may still be
+ Snp->Mode->ReceiveFilterSettings will make it so no more packets are
+ returned by the Receive() function, but the receive hardware may still be
moving packets into system memory before inspecting and discarding them.
- Unexpected system errors, reboots and hangs can occur if an OS is loaded
+ Unexpected system errors, reboots and hangs can occur if an OS is loaded
and the network devices are not Shutdown() and Stopped().
- If ResetMCastFilter is TRUE, then the multicast receive filter list on the
+ If ResetMCastFilter is TRUE, then the multicast receive filter list on the
network interface will be reset to the default multicast receive filter list.
- If ResetMCastFilter is FALSE, and this network interface allows the multicast
- receive filter list to be modified, then the MCastFilterCnt and MCastFilter
- are used to update the current multicast receive filter list. The modified
- receive filter list settings can be found in the MCastFilter field of
+ If ResetMCastFilter is FALSE, and this network interface allows the multicast
+ receive filter list to be modified, then the MCastFilterCnt and MCastFilter
+ are used to update the current multicast receive filter list. The modified
+ receive filter list settings can be found in the MCastFilter field of
EFI_SIMPLE_NETWORK_MODE. If the network interface does not allow the multicast
receive filter list to be modified, then EFI_INVALID_PARAMETER will be returned.
If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
- If the receive filter mask and multicast receive filter list have been
+ If the receive filter mask and multicast receive filter list have been
successfully updated on the network interface, EFI_SUCCESS will be returned.
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
@param Enable A bit mask of receive filters to enable on the network
interface.
@param Disable A bit mask of receive filters to disable on the network
- interface. For backward compatibility with EFI 1.1
+ interface. For backward compatibility with EFI 1.1
platforms, the EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit
must be set when the ResetMCastFilter parameter is TRUE.
- @param ResetMCastFilter Set to TRUE to reset the contents of the multicast
- receive filters on the network interface to their
- default values.
+ @param ResetMCastFilter Set to TRUE to reset the contents of the multicast
+ receive filters on the network interface to their
+ default values.
@param MCastFilterCnt Number of multicast HW MAC addresses in the new MCastFilter
- list. This value must be less than or equal to the
- MCastFilterCnt field of EFI_SIMPLE_NETWORK_MODE.
+ list. This value must be less than or equal to the
+ MCastFilterCnt field of EFI_SIMPLE_NETWORK_MODE.
This field is optional if ResetMCastFilter is TRUE.
@param MCastFilter A pointer to a list of new multicast receive filter HW
- MAC addresses. This list will replace any existing
- multicast HW MAC address list. This field is optional
+ MAC addresses. This list will replace any existing
+ multicast HW MAC address list. This field is optional
if ResetMCastFilter is TRUE.
-
+
@retval EFI_SUCCESS The multicast receive filter list was updated.
@retval EFI_NOT_STARTED The network interface has not been started.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
@@ -363,9 +363,9 @@ PxeRecvFilterRead ( in Snp->Mode->ReceiveFilterMask
* There are bits set in Disable that are not set
in Snp->Mode->ReceiveFilterMask
- * Multicast is being enabled (the
- EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit is
- set in Enable, it is not set in Disable, and
+ * Multicast is being enabled (the
+ EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit is
+ set in Enable, it is not set in Disable, and
ResetMCastFilter is FALSE) and MCastFilterCount
is zero
* Multicast is being enabled and MCastFilterCount
@@ -377,7 +377,7 @@ PxeRecvFilterRead ( @retval EFI_DEVICE_ERROR One or more of the following conditions is TRUE:
* The network interface has been started but has
not been initialized
- * An unexpected error was returned by the
+ * An unexpected error was returned by the
underlying network driver or device
@retval EFI_UNSUPPORTED This function is not supported by the network
interface.
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Reset.c b/MdeModulePkg/Universal/Network/SnpDxe/Reset.c index 2381264..498d706 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Reset.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Reset.c @@ -1,11 +1,11 @@ /** @file
Implementation of resetting a network adapter.
-
-Copyright (c) 2004 - 2007, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed and made available under the
-terms and conditions of the BSD License which accompanies this distribution. The
-full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed and made available under the
+terms and conditions of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -70,16 +70,16 @@ PxeReset ( provided in the previous call to Initialize().
This function resets a network adapter and reinitializes it with the parameters
- that were provided in the previous call to Initialize(). The transmit and
+ that were provided in the previous call to Initialize(). The transmit and
receive queues are emptied and all pending interrupts are cleared.
- Receive filters, the station address, the statistics, and the multicast-IP-to-HW
- MAC addresses are not reset by this call. If the network interface was
- successfully reset, then EFI_SUCCESS will be returned. If the driver has not
+ Receive filters, the station address, the statistics, and the multicast-IP-to-HW
+ MAC addresses are not reset by this call. If the network interface was
+ successfully reset, then EFI_SUCCESS will be returned. If the driver has not
been initialized, EFI_DEVICE_ERROR will be returned.
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
- @param ExtendedVerification Indicates that the driver may perform a more
- exhaustive verification operation of the device
+ @param ExtendedVerification Indicates that the driver may perform a more
+ exhaustive verification operation of the device
during reset.
@retval EFI_SUCCESS The network interface was reset.
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Shutdown.c b/MdeModulePkg/Universal/Network/SnpDxe/Shutdown.c index 1f51992..670e93b 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Shutdown.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Shutdown.c @@ -1,11 +1,11 @@ /** @file
Implementation of shuting down a network adapter.
-
-Copyright (c) 2004 - 2007, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -74,12 +74,12 @@ PxeShutdown ( /**
- Resets a network adapter and leaves it in a state that is safe for another
- driver to initialize.
-
+ Resets a network adapter and leaves it in a state that is safe for another
+ driver to initialize.
+
This function releases the memory buffers assigned in the Initialize() call.
Pending transmits and receives are lost, and interrupts are cleared and disabled.
- After this call, only the Initialize() and Stop() calls may be used. If the
+ After this call, only the Initialize() and Stop() calls may be used. If the
network interface was successfully shutdown, then EFI_SUCCESS will be returned.
If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
@@ -87,7 +87,7 @@ PxeShutdown ( @retval EFI_SUCCESS The network interface was shutdown.
@retval EFI_NOT_STARTED The network interface has not been started.
- @retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ @retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
EFI_SIMPLE_NETWORK_PROTOCOL structure.
@retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
@@ -128,7 +128,7 @@ SnpUndi32Shutdown ( Status = EFI_DEVICE_ERROR;
goto ON_EXIT;
}
-
+
Status = PxeShutdown (Snp);
Snp->Mode.State = EfiSimpleNetworkStarted;
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Snp.c b/MdeModulePkg/Universal/Network/SnpDxe/Snp.c index 9f61aee..43cb21b 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Snp.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Snp.c @@ -1,7 +1,7 @@ /** @file
Implementation of driver entry point and driver binding protocol.
-Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed
and made available under the terms and conditions of the BSD License which
accompanies this distribution. The full text of the license may be found at
@@ -275,7 +275,7 @@ SimpleNetworkDriverStart ( EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *BarDesc;
BOOLEAN FoundIoBar;
BOOLEAN FoundMemoryBar;
-
+
DEBUG ((EFI_D_NET, "\nSnpNotifyNetworkInterfaceIdentifier() "));
Status = gBS->OpenProtocol (
@@ -411,7 +411,7 @@ SimpleNetworkDriverStart ( }
Snp->MaxRecycledTxBuf = SNP_TX_BUFFER_INCREASEMENT;
Snp->RecycledTxBufCount = 0;
-
+
if (Nii->Revision >= EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL_REVISION) {
Snp->IfNum = Nii->IfNum;
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf b/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf index 90fd8d5..021d45d 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf +++ b/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf @@ -1,14 +1,14 @@ ## @file
# This module produces EFI SNP Protocol.
#
-# This module produces Simple Network Protocol upon EFI Network Interface
+# This module produces Simple Network Protocol upon EFI Network Interface
# Identifier Protocol, to provide a packet level interface to a network adapter.
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials are licensed
-# and made available under the terms and conditions of the BSD License which
-# accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials are licensed
+# and made available under the terms and conditions of the BSD License which
+# accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -30,7 +30,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
-# DRIVER_BINDING = mSimpleNetworkDriverBinding
+# DRIVER_BINDING = mSimpleNetworkDriverBinding
# COMPONENT_NAME = gSimpleNetworkComponentName
# COMPONENT_NAME2 = gSimpleNetworkComponentName2
#
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.uni b/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.uni index cd1e9ba..55e8adf 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.uni +++ b/MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.uni @@ -4,13 +4,13 @@ // This module produces Simple Network Protocol upon EFI Network Interface
// Identifier Protocol, to provide a packet level interface to a network adapter.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials are licensed
// and made available under the terms and conditions of the BSD License which
// accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/SnpDxeExtra.uni b/MdeModulePkg/Universal/Network/SnpDxe/SnpDxeExtra.uni index 5476a45..7c22065 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/SnpDxeExtra.uni +++ b/MdeModulePkg/Universal/Network/SnpDxe/SnpDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// SnpDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials are licensed
// and made available under the terms and conditions of the BSD License which
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"SNP DXE Driver"
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Start.c b/MdeModulePkg/Universal/Network/SnpDxe/Start.c index 210f081..82d49c8 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Start.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Start.c @@ -1,11 +1,11 @@ /** @file
Implementation of starting a network adapter.
-
-Copyright (c) 2004 - 2007, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -22,7 +22,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. @retval EFI_SUCCESS UNDI is started successfully.
@retval EFI_DEVICE_ERROR UNDI could not be started.
-
+
**/
EFI_STATUS
PxeStart (
@@ -100,7 +100,7 @@ PxeStart ( /**
Change the state of a network interface from "stopped" to "started."
-
+
This function starts a network interface. If the network interface successfully
starts, then EFI_SUCCESS will be returned.
@@ -108,7 +108,7 @@ PxeStart ( @retval EFI_SUCCESS The network interface was started.
@retval EFI_ALREADY_STARTED The network interface is already in the started state.
- @retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ @retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
EFI_SIMPLE_NETWORK_PROTOCOL structure.
@retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
@retval EFI_UNSUPPORTED This function is not supported by the network interface.
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Station_address.c b/MdeModulePkg/Universal/Network/SnpDxe/Station_address.c index 0917baf..ce70fcd 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Station_address.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Station_address.c @@ -1,11 +1,11 @@ /** @file
Implementation of reading the MAC address of a network adapter.
-
-Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -16,11 +16,11 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. /**
- Call UNDI to read the MAC address of the NIC and update the mode structure
- with the address.
+ Call UNDI to read the MAC address of the NIC and update the mode structure
+ with the address.
@param Snp Pointer to snp driver structure.
-
+
@retval EFI_SUCCESS The MAC address of the NIC is read successfully.
@retval EFI_DEVICE_ERROR Failed to read the MAC address of the NIC.
@@ -166,33 +166,33 @@ PxeSetStnAddr ( /**
Modifies or resets the current station address, if supported.
-
- This function modifies or resets the current station address of a network
+
+ This function modifies or resets the current station address of a network
interface, if supported. If Reset is TRUE, then the current station address is
- set to the network interface's permanent address. If Reset is FALSE, and the
- network interface allows its station address to be modified, then the current
- station address is changed to the address specified by New. If the network
- interface does not allow its station address to be modified, then
+ set to the network interface's permanent address. If Reset is FALSE, and the
+ network interface allows its station address to be modified, then the current
+ station address is changed to the address specified by New. If the network
+ interface does not allow its station address to be modified, then
EFI_INVALID_PARAMETER will be returned. If the station address is successfully
updated on the network interface, EFI_SUCCESS will be returned. If the driver
has not been initialized, EFI_DEVICE_ERROR will be returned.
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
- @param Reset Flag used to reset the station address to the network interface's
+ @param Reset Flag used to reset the station address to the network interface's
permanent address.
@param New New station address to be used for the network interface.
@retval EFI_SUCCESS The network interface's station address was updated.
- @retval EFI_NOT_STARTED The Simple Network Protocol interface has not been
+ @retval EFI_NOT_STARTED The Simple Network Protocol interface has not been
started by calling Start().
@retval EFI_INVALID_PARAMETER The New station address was not accepted by the NIC.
@retval EFI_INVALID_PARAMETER Reset is FALSE and New is NULL.
- @retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ @retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
been initialized by calling Initialize().
- @retval EFI_DEVICE_ERROR An error occurred attempting to set the new
+ @retval EFI_DEVICE_ERROR An error occurred attempting to set the new
station address.
- @retval EFI_UNSUPPORTED The NIC does not support changing the network
+ @retval EFI_UNSUPPORTED The NIC does not support changing the network
interface's station address.
**/
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Stop.c b/MdeModulePkg/Universal/Network/SnpDxe/Stop.c index a52d3b1..46032f3 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Stop.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Stop.c @@ -1,11 +1,11 @@ /** @file
Implementation of stopping a network interface.
-
-Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -19,7 +19,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Call UNDI to stop the interface and changes the snp state.
@param Snp Pointer to snp driver structure
-
+
@retval EFI_SUCCESS The network interface was stopped.
@retval EFI_DEVICE_ERROR SNP is not initialized.
@@ -67,22 +67,22 @@ PxeStop ( /**
Changes the state of a network interface from "started" to "stopped."
-
+
This function stops a network interface. This call is only valid if the network
interface is in the started state. If the network interface was successfully
stopped, then EFI_SUCCESS will be returned.
-
- @param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL
+
+ @param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL
instance.
-
-
+
+
@retval EFI_SUCCESS The network interface was stopped.
@retval EFI_NOT_STARTED The network interface has not been started.
- @retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a
+ @retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a
valid EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network
+ @retval EFI_DEVICE_ERROR The command could not be sent to the network
interface.
- @retval EFI_UNSUPPORTED This function is not supported by the network
+ @retval EFI_UNSUPPORTED This function is not supported by the network
interface.
**/
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/Transmit.c b/MdeModulePkg/Universal/Network/SnpDxe/Transmit.c index 2c7083e..aff4e84 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/Transmit.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/Transmit.c @@ -1,11 +1,11 @@ /** @file
Implementation of transmitting a packet.
-
-Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@@ -221,45 +221,45 @@ PxeTransmit ( /**
Places a packet in the transmit queue of a network interface.
-
+
This function places the packet specified by Header and Buffer on the transmit
- queue. If HeaderSize is nonzero and HeaderSize is not equal to
- This->Mode->MediaHeaderSize, then EFI_INVALID_PARAMETER will be returned. If
+ queue. If HeaderSize is nonzero and HeaderSize is not equal to
+ This->Mode->MediaHeaderSize, then EFI_INVALID_PARAMETER will be returned. If
BufferSize is less than This->Mode->MediaHeaderSize, then EFI_BUFFER_TOO_SMALL
- will be returned. If Buffer is NULL, then EFI_INVALID_PARAMETER will be
+ will be returned. If Buffer is NULL, then EFI_INVALID_PARAMETER will be
returned. If HeaderSize is nonzero and DestAddr or Protocol is NULL, then
EFI_INVALID_PARAMETER will be returned. If the transmit engine of the network
- interface is busy, then EFI_NOT_READY will be returned. If this packet can be
- accepted by the transmit engine of the network interface, the packet contents
- specified by Buffer will be placed on the transmit queue of the network
- interface, and EFI_SUCCESS will be returned. GetStatus() can be used to
- determine when the packet has actually been transmitted. The contents of the
- Buffer must not be modified until the packet has actually been transmitted.
+ interface is busy, then EFI_NOT_READY will be returned. If this packet can be
+ accepted by the transmit engine of the network interface, the packet contents
+ specified by Buffer will be placed on the transmit queue of the network
+ interface, and EFI_SUCCESS will be returned. GetStatus() can be used to
+ determine when the packet has actually been transmitted. The contents of the
+ Buffer must not be modified until the packet has actually been transmitted.
The Transmit() function performs nonblocking I/O. A caller who wants to perform
- blocking I/O, should call Transmit(), and then GetStatus() until the
+ blocking I/O, should call Transmit(), and then GetStatus() until the
transmitted buffer shows up in the recycled transmit buffer.
If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
- @param HeaderSize The size, in bytes, of the media header to be filled in by the
+ @param HeaderSize The size, in bytes, of the media header to be filled in by the
Transmit() function. If HeaderSize is nonzero, then it must
be equal to This->Mode->MediaHeaderSize and the DestAddr and
Protocol parameters must not be NULL.
@param BufferSize The size, in bytes, of the entire packet (media header and
data) to be transmitted through the network interface.
- @param Buffer A pointer to the packet (media header followed by data) to be
- transmitted. This parameter cannot be NULL. If HeaderSize is
+ @param Buffer A pointer to the packet (media header followed by data) to be
+ transmitted. This parameter cannot be NULL. If HeaderSize is
zero, then the media header in Buffer must already be filled
- in by the caller. If HeaderSize is nonzero, then the media
+ in by the caller. If HeaderSize is nonzero, then the media
header will be filled in by the Transmit() function.
- @param SrcAddr The source HW MAC address. If HeaderSize is zero, then this
- parameter is ignored. If HeaderSize is nonzero and SrcAddr
- is NULL, then This->Mode->CurrentAddress is used for the
+ @param SrcAddr The source HW MAC address. If HeaderSize is zero, then this
+ parameter is ignored. If HeaderSize is nonzero and SrcAddr
+ is NULL, then This->Mode->CurrentAddress is used for the
source HW MAC address.
- @param DestAddr The destination HW MAC address. If HeaderSize is zero, then
+ @param DestAddr The destination HW MAC address. If HeaderSize is zero, then
this parameter is ignored.
- @param Protocol The type of header to build. If HeaderSize is zero, then this
- parameter is ignored. See RFC 1700, section "Ether Types,"
+ @param Protocol The type of header to build. If HeaderSize is zero, then this
+ parameter is ignored. See RFC 1700, section "Ether Types,"
for examples.
@retval EFI_SUCCESS The packet was placed on the transmit queue.
diff --git a/MdeModulePkg/Universal/Network/SnpDxe/WaitForPacket.c b/MdeModulePkg/Universal/Network/SnpDxe/WaitForPacket.c index 23d7455..137f9ed 100644 --- a/MdeModulePkg/Universal/Network/SnpDxe/WaitForPacket.c +++ b/MdeModulePkg/Universal/Network/SnpDxe/WaitForPacket.c @@ -1,11 +1,11 @@ /** @file
Event handler to check for available packet.
-Copyright (c) 2004 - 2008, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are licensed
-and made available under the terms and conditions of the BSD License which
-accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|