diff options
Diffstat (limited to 'MdeModulePkg/Universal/Network/IScsiDxe/IScsiProto.c')
| -rw-r--r-- | MdeModulePkg/Universal/Network/IScsiDxe/IScsiProto.c | 120 |
1 files changed, 59 insertions, 61 deletions
diff --git a/MdeModulePkg/Universal/Network/IScsiDxe/IScsiProto.c b/MdeModulePkg/Universal/Network/IScsiDxe/IScsiProto.c index f3ed2b7..06b60da 100644 --- a/MdeModulePkg/Universal/Network/IScsiDxe/IScsiProto.c +++ b/MdeModulePkg/Universal/Network/IScsiDxe/IScsiProto.c @@ -19,13 +19,13 @@ UINT32 mDataSegPad = 0; /**
Attach the iSCSI connection to the iSCSI session.
- @param[in] Session The iSCSI session.
- @param[in] Conn The iSCSI connection.
+ @param[in, out] Session The iSCSI session.
+ @param[in, out] Conn The iSCSI connection.
**/
VOID
IScsiAttatchConnection (
- IN ISCSI_SESSION *Session,
- IN ISCSI_CONNECTION *Conn
+ IN OUT ISCSI_SESSION *Session,
+ IN OUT ISCSI_CONNECTION *Conn
)
{
InsertTailList (&Session->Conns, &Conn->Link);
@@ -36,11 +36,11 @@ IScsiAttatchConnection ( /**
Detach the iSCSI connection from the session it belongs to.
- @param[in] Conn The iSCSI connection.
+ @param[in, out] Conn The iSCSI connection.
**/
VOID
IScsiDetatchConnection (
- IN ISCSI_CONNECTION *Conn
+ IN OUT ISCSI_CONNECTION *Conn
)
{
RemoveEntryList (&Conn->Link);
@@ -51,8 +51,8 @@ IScsiDetatchConnection ( /**
Check the sequence number according to RFC3720.
- @param[in] ExpSN The currently expected sequence number.
- @param[in] NewSN The sequence number to check.
+ @param[in, out] ExpSN The currently expected sequence number.
+ @param[in] NewSN The sequence number to check.
@retval EFI_SUCCESS The check passed and the ExpSN is increased.
@retval EFI_NOT_READY Response was sent due to a retransmission request.
@@ -60,8 +60,8 @@ IScsiDetatchConnection ( **/
EFI_STATUS
IScsiCheckSN (
- IN UINT32 *ExpSN,
- IN UINT32 NewSN
+ IN OUT UINT32 *ExpSN,
+ IN UINT32 NewSN
)
{
if (!ISCSI_SEQ_EQ (NewSN, *ExpSN)) {
@@ -85,15 +85,15 @@ IScsiCheckSN ( /**
Update the sequence numbers for the iSCSI command.
- @param[in] Session The iSCSI session.
- @param[in] MaxCmdSN Maximum CmdSN from the target.
- @param[in] ExpCmdSN Next expected CmdSN from the target.
+ @param[in, out] Session The iSCSI session.
+ @param[in] MaxCmdSN Maximum CmdSN from the target.
+ @param[in] ExpCmdSN Next expected CmdSN from the target.
**/
VOID
IScsiUpdateCmdSN (
- IN ISCSI_SESSION *Session,
- IN UINT32 MaxCmdSN,
- IN UINT32 ExpCmdSN
+ IN OUT ISCSI_SESSION *Session,
+ IN UINT32 MaxCmdSN,
+ IN UINT32 ExpCmdSN
)
{
if (ISCSI_SEQ_LT (MaxCmdSN, ExpCmdSN - 1)) {
@@ -112,7 +112,7 @@ IScsiUpdateCmdSN ( /**
This function does the iSCSI connection login.
- @param[in] Conn The iSCSI connection to login.
+ @param[in, out] Conn The iSCSI connection to login.
@retval EFI_SUCCESS The iSCSI connection is logged into the iSCSI target.
@retval EFI_TIMEOUT Timeout happened during the login procedure.
@@ -120,7 +120,7 @@ IScsiUpdateCmdSN ( **/
EFI_STATUS
IScsiConnLogin (
- IN ISCSI_CONNECTION *Conn
+ IN OUT ISCSI_CONNECTION *Conn
)
{
EFI_STATUS Status;
@@ -164,11 +164,11 @@ IScsiConnLogin ( /**
Reset the iSCSI connection.
- @param[in] Conn The iSCSI connection to reset.
+ @param[in, out] Conn The iSCSI connection to reset.
**/
VOID
IScsiConnReset (
- IN ISCSI_CONNECTION *Conn
+ IN OUT ISCSI_CONNECTION *Conn
)
{
Tcp4IoReset (&Conn->Tcp4Io);
@@ -398,10 +398,10 @@ IScsiReceiveLoginRsp ( The DataSegmentLength and the actual size of the net buffer containing this PDU will be
updated.
- @param[in] Pdu The iSCSI PDU whose data segment the key-value pair will
+ @param[in, out] Pdu The iSCSI PDU whose data segment the key-value pair will
be added to.
- @param[in] Key The key name string.
- @param[in] Value The value string.
+ @param[in] Key The key name string.
+ @param[in] Value The value string.
@retval EFI_SUCCESS The key-valu pair is added to the PDU's datasegment and
the correspondence length fields are updated.
@@ -410,7 +410,7 @@ IScsiReceiveLoginRsp ( **/
EFI_STATUS
IScsiAddKeyValuePair (
- IN NET_BUF *Pdu,
+ IN OUT NET_BUF *Pdu,
IN CHAR8 *Key,
IN CHAR8 *Value
)
@@ -469,14 +469,14 @@ IScsiAddKeyValuePair ( /**
Prepare the iSCSI login request to be sent according to the current login status.
- @param[in] Conn The connection in the iSCSI login phase.
+ @param[in, out] Conn The connection in the iSCSI login phase.
@return The pointer to the net buffer containing the iSCSI login request built.
@retval Others Other errors as indicated.
**/
NET_BUF *
IScsiPrepareLoginReq (
- IN ISCSI_CONNECTION *Conn
+ IN OUT ISCSI_CONNECTION *Conn
)
{
ISCSI_SESSION *Session;
@@ -561,8 +561,8 @@ IScsiPrepareLoginReq ( /**
Process the iSCSI Login Response.
- @param[in] Conn The connection on which the iSCSI login response is received.
- @param[in] Pdu The iSCSI login response PDU.
+ @param[in, out] Conn The connection on which the iSCSI login response is received.
+ @param[in, out] Pdu The iSCSI login response PDU.
@retval EFI_SUCCESS The iSCSI login response PDU is processed and all check are passed.
@retval EFI_PROTOCOL_ERROR Some kind of iSCSI protocol error happened.
@@ -571,8 +571,8 @@ IScsiPrepareLoginReq ( **/
EFI_STATUS
IScsiProcessLoginRsp (
- IN ISCSI_CONNECTION *Conn,
- IN NET_BUF *Pdu
+ IN OUT ISCSI_CONNECTION *Conn,
+ IN OUT NET_BUF *Pdu
)
{
EFI_STATUS Status;
@@ -722,14 +722,14 @@ IScsiProcessLoginRsp ( //
// In security negotiation stage, let CHAP module handle it.
//
- Status = IScsiCHAPOnRspReceived (Conn, Transit);
+ Status = IScsiCHAPOnRspReceived (Conn);
break;
case ISCSI_LOGIN_OPERATIONAL_NEGOTIATION:
//
// Response received with negotiation resonse on iSCSI parameters, check them.
//
- Status = IScsiCheckOpParams (Conn, Transit);
+ Status = IScsiCheckOpParams (Conn);
break;
default:
@@ -768,10 +768,10 @@ IScsiProcessLoginRsp ( Updated the target information according the data received in the iSCSI
login response with an target redirection status.
- @param[in] Session The iSCSI session.
- @param[in] Data The data segment which should contain the
- TargetAddress key-value list.
- @param[in] Len Length of the data.
+ @param[in, out] Session The iSCSI session.
+ @param[in] Data The data segment which should contain the
+ TargetAddress key-value list.
+ @param[in] Len Length of the data.
@retval EFI_SUCCESS The target address is updated.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@@ -780,9 +780,9 @@ IScsiProcessLoginRsp ( **/
EFI_STATUS
IScsiUpdateTargetAddress (
- IN ISCSI_SESSION *Session,
- IN CHAR8 *Data,
- IN UINT32 Len
+ IN OUT ISCSI_SESSION *Session,
+ IN CHAR8 *Data,
+ IN UINT32 Len
)
{
LIST_ENTRY *KeyValueList;
@@ -1091,8 +1091,7 @@ ON_EXIT: /**
Check and get the result of the prameter negotiation.
- @param[in] Conn The connection in iSCSI login.
- @param[in] Transit Whether need transit.
+ @param[in, out] Conn The connection in iSCSI login.
@retval EFI_SUCCESS The parmeter check is passed and negotiation is finished.
@retval EFI_PROTOCOL_ERROR Some kind of iSCSI protocol error happened.
@@ -1100,8 +1099,7 @@ ON_EXIT: **/
EFI_STATUS
IScsiCheckOpParams (
- IN ISCSI_CONNECTION *Conn,
- IN BOOLEAN Transit
+ IN OUT ISCSI_CONNECTION *Conn
)
{
EFI_STATUS Status;
@@ -1346,15 +1344,15 @@ ON_ERROR: /**
Fill the oprational prameters.
- @param[in] Conn The connection in iSCSI login.
- @param[in] Pdu The iSCSI login request PDU to fill the parameters.
+ @param[in] Conn The connection in iSCSI login.
+ @param[in, out] Pdu The iSCSI login request PDU to fill the parameters.
@retval EFI_SUCCESS The parmeters are filled into the iSCSI login request PDU.
**/
EFI_STATUS
IScsiFillOpParams (
IN ISCSI_CONNECTION *Conn,
- IN NET_BUF *Pdu
+ IN OUT NET_BUF *Pdu
)
{
ISCSI_SESSION *Session;
@@ -1410,8 +1408,8 @@ IScsiFillOpParams ( /**
Pad the iSCSI AHS or data segment to an integer number of 4 byte words.
- @param[in] Pdu The iSCSI pdu which contains segments to pad.
- @param[in] Len The length of the last semgnet in the PDU.
+ @param[in, out] Pdu The iSCSI pdu which contains segments to pad.
+ @param[in] Len The length of the last semgnet in the PDU.
@retval EFI_SUCCESS The segment is padded or no need to pad it.
@retval EFI_OUT_OF_RESOURCES There is not enough remaining free space to add the
@@ -1419,8 +1417,8 @@ IScsiFillOpParams ( **/
EFI_STATUS
IScsiPadSegment (
- IN NET_BUF *Pdu,
- IN UINT32 Len
+ IN OUT NET_BUF *Pdu,
+ IN UINT32 Len
)
{
UINT32 PadLen;
@@ -1511,14 +1509,14 @@ ON_ERROR: Get the value string by the key name from the key-value list. If found,
the key-value entry will be removed from the list.
- @param[in] KeyValueList The key-value list.
- @param[in] Key The key name to find.
+ @param[in, out] KeyValueList The key-value list.
+ @param[in] Key The key name to find.
@return The value string.
**/
CHAR8 *
IScsiGetValueByKeyFromList (
- IN LIST_ENTRY *KeyValueList,
+ IN OUT LIST_ENTRY *KeyValueList,
IN CHAR8 *Key
)
{
@@ -1569,16 +1567,16 @@ IScsiFreeKeyValueList ( /**
Normalize the iSCSI name according to RFC.
- @param[in] Name The iSCSI name.
- @param[in] Len length of the iSCSI name.
+ @param[in, out] Name The iSCSI name.
+ @param[in] Len length of the iSCSI name.
@retval EFI_SUCCESS The iSCSI name is valid and normalized.
@retval EFI_PROTOCOL_ERROR The iSCSI name is mal-formatted or not in the IQN format.
**/
EFI_STATUS
IScsiNormalizeName (
- IN CHAR8 *Name,
- IN UINTN Len
+ IN OUT CHAR8 *Name,
+ IN UINTN Len
)
{
UINTN Index;
@@ -2621,14 +2619,14 @@ ON_EXIT: /**
Reinstate the session on some error.
- @param[in] Private The iSCSI driver data.
+ @param[in, out] Private The iSCSI driver data.
@retval EFI_SUCCES The session is reinstated from some error.
@retval Other Reinstatement failed.
**/
EFI_STATUS
IScsiSessionReinstatement (
- IN ISCSI_DRIVER_DATA *Private
+ IN OUT ISCSI_DRIVER_DATA *Private
)
{
ISCSI_SESSION *Session;
@@ -2706,13 +2704,13 @@ IScsiSessionInit ( Abort the iSCSI session, that is, reset all the connection and free the
resources.
- @param[in] Session The iSCSI session.
+ @param[in, out] Session The iSCSI session.
@retval EFI_SUCCES The session is aborted.
**/
EFI_STATUS
IScsiSessionAbort (
- IN ISCSI_SESSION *Session
+ IN OUT ISCSI_SESSION *Session
)
{
ISCSI_DRIVER_DATA *Private;
|