diff options
Diffstat (limited to 'MdeModulePkg/Bus')
190 files changed, 2015 insertions, 2015 deletions
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c index 5da5018..79ae11b 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c @@ -820,7 +820,7 @@ AhciPioTransfer ( Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
PortTfd = AhciReadReg (PciIo, (UINT32) Offset);
//
- // PxTFD will be updated if there is a D2H or SetupFIS received.
+ // PxTFD will be updated if there is a D2H or SetupFIS received.
//
if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
Status = EFI_DEVICE_ERROR;
@@ -2010,7 +2010,7 @@ AhciCreateTransferDescriptor ( //
MaxCommandSlotNumber = (UINT8) (((Capability & 0x1F00) >> 8) + 1);
Support64Bit = (BOOLEAN) (((Capability & BIT31) != 0) ? TRUE : FALSE);
-
+
PortImplementBitMap = AhciReadReg(PciIo, EFI_AHCI_PI_OFFSET);
//
// Get the highest bit of implemented ports which decides how many bytes are allocated for recived FIS.
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h index 0ef749b..3b7500c 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h @@ -1,14 +1,14 @@ /** @file
Header file for AHCI mode of ATA host controller.
-
+
Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __ATA_HC_AHCI_MODE_H__
@@ -68,7 +68,7 @@ typedef union { #define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register FIS - Host to Device
-#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
+#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register FIS - Device to Host
#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA Activate FIS - Device to Host
@@ -213,12 +213,12 @@ typedef struct { UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address Upper 32-BITs
- UINT32 AhciCmdRsvd1[4];
+ UINT32 AhciCmdRsvd1[4];
} EFI_AHCI_COMMAND_LIST;
//
// This is a software constructed FIS.
-// For data transfer operations, this is the H2D Register FIS format as
+// For data transfer operations, this is the H2D Register FIS format as
// specified in the Serial ATA Revision 2.6 specification.
//
typedef struct {
@@ -257,7 +257,7 @@ typedef struct { // Physical Region Descriptor Table includes up to 65535 entries
// The entry data structure is listed at the following.
// the actual entry number comes from the PRDTL field in the command
-// list entry for this command slot.
+// list entry for this command slot.
//
typedef struct {
UINT32 AhciPrdtDba; //Data Base Address
@@ -285,13 +285,13 @@ typedef struct { UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
UINT8 AhciDmaSetupFisRsvd[0x04];
UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
- UINT8 AhciPioSetupFisRsvd[0x0C];
+ UINT8 AhciPioSetupFisRsvd[0x0C];
UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
UINT8 AhciD2HRegisterFisRsvd[0x04];
UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
- UINT8 AhciUnknownFisRsvd[0x60];
-} EFI_AHCI_RECEIVED_FIS;
+ UINT8 AhciUnknownFisRsvd[0x60];
+} EFI_AHCI_RECEIVED_FIS;
typedef struct {
UINT8 Madt : 5;
@@ -320,12 +320,12 @@ typedef struct { } EFI_AHCI_REGISTERS;
/**
- This function is used to send out ATAPI commands conforms to the Packet Command
+ This function is used to send out ATAPI commands conforms to the Packet Command
with PIO Protocol.
@param PciIo The PCI IO protocol instance.
@param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
+ @param Port The number of port.
@param PortMultiplier The number of port multiplier.
@param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.
@@ -346,12 +346,12 @@ AhciPacketCommandExecute ( /**
Start command for give slot on specific port.
-
+
@param PciIo The PCI IO protocol instance.
@param Port The number of port.
@param CommandSlot The number of CommandSlot.
@param Timeout The timeout value of start, uses 100ns as a unit.
-
+
@retval EFI_DEVICE_ERROR The command start unsuccessfully.
@retval EFI_TIMEOUT The operation is time out.
@retval EFI_SUCCESS The command start successfully.
@@ -368,11 +368,11 @@ AhciStartCommand ( /**
Stop command running for giving port
-
+
@param PciIo The PCI IO protocol instance.
@param Port The number of port.
@param Timeout The timeout value of stop, uses 100ns as a unit.
-
+
@retval EFI_DEVICE_ERROR The command stop unsuccessfully.
@retval EFI_TIMEOUT The operation is time out.
@retval EFI_SUCCESS The command stop successfully.
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf index d1ce859..74e6264 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf @@ -29,9 +29,9 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
-# DRIVER_BINDING = gAtaAtapiPassThruDriverBinding
+# DRIVER_BINDING = gAtaAtapiPassThruDriverBinding
# COMPONENT_NAME = gAtaAtapiPassThruComponentName
-# COMPONENT_NAME2 = gAtaAtapiPassThruComponentName2
+# COMPONENT_NAME2 = gAtaAtapiPassThruComponentName2
#
#
@@ -43,7 +43,7 @@ IdeMode.c
IdeMode.h
ComponentName.c
-
+
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni index 8af8f56..4aff950 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// AtaAtapiPassThruDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"ATA ATAPI Pass Thru DXE Driver"
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c index c3f7738..c4cfedd 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c @@ -1,21 +1,21 @@ /** @file
UEFI Component Name(2) protocol implementation for AtaAtapiPassThru driver.
-
- Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "AtaAtapiPassThru.h"
//
-// Driver name table
+// Driver name table
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruDriverNameTable[] = {
{ "eng;en", L"AtaAtapiPassThru Driver" },
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h index 67fff64..7b70d5f 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h @@ -1,14 +1,14 @@ /** @file
Header file for IDE mode of ATA host controller.
-
- Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __ATA_HC_IDE_MODE_H__
@@ -121,7 +121,7 @@ typedef struct { #define IDE_SECONDARY_PROGRAMMABLE_INDICATOR BIT3
/**
- Get IDE i/o port registers' base addresses by mode.
+ Get IDE i/o port registers' base addresses by mode.
In 'Compatibility' mode, use fixed addresses.
In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
@@ -144,7 +144,7 @@ typedef struct { |___________|_______________|_______________|
Table 1. Compatibility resource mappings
-
+
b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
in IDE controller's PCI Configuration Space, shown in the Table 2 below.
___________________________________________________
@@ -161,7 +161,7 @@ typedef struct { @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
@param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
store the IDE i/o port registers' base addresses
-
+
@retval EFI_UNSUPPORTED Return this value when the BARs is not IO type
@retval EFI_SUCCESS Get the Base address successfully
@retval Other Read the pci configureation data error
@@ -175,7 +175,7 @@ GetIdeRegisterIoAddr ( );
/**
- This function is used to send out ATAPI commands conforms to the Packet Command
+ This function is used to send out ATAPI commands conforms to the Packet Command
with PIO Data In Protocol.
@param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
diff --git a/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxeExtra.uni b/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxeExtra.uni index a55c9ac..ea8b25c 100644 --- a/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxeExtra.uni +++ b/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// AtaBusDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"ATA Bus DXE Driver"
diff --git a/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaPassThruExecute.c b/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaPassThruExecute.c index 35a1b47..03b0888 100644 --- a/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaPassThruExecute.c +++ b/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaPassThruExecute.c @@ -10,7 +10,7 @@ for Security Protocol Specific layout. This implementation uses big endian for
Cylinder register.
- Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
(C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -633,7 +633,7 @@ AtaTerminateNonBlockingTask ( //
// Aborting operation has been done. From now on, don't need to abort normal operation.
- //
+ //
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
AtaDevice->Abort = FALSE;
gBS->RestoreTPL (OldTpl);
diff --git a/MdeModulePkg/Bus/Ata/AtaBusDxe/ComponentName.c b/MdeModulePkg/Bus/Ata/AtaBusDxe/ComponentName.c index ff9d727..e79ae3c 100644 --- a/MdeModulePkg/Bus/Ata/AtaBusDxe/ComponentName.c +++ b/MdeModulePkg/Bus/Ata/AtaBusDxe/ComponentName.c @@ -1,21 +1,21 @@ /** @file
UEFI Component Name(2) protocol implementation for ConPlatform driver.
-
- Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "AtaBus.h"
//
-// Driver name table
+// Driver name table
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaBusDriverNameTable[] = {
{ "eng;en", L"ATA Bus Driver" },
diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c b/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c index cad5ad7..99d9208 100644 --- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c +++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c @@ -1,8 +1,8 @@ /** @file
- This file implements I2C IO Protocol which enables the user to manipulate a single
+ This file implements I2C IO Protocol which enables the user to manipulate a single
I2C device independent of the host controller and I2C design.
- Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -76,7 +76,7 @@ VENDOR_DEVICE_PATH gVendorDevicePathTemplate = { };
//
-// Driver name table
+// Driver name table
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mI2cBusDriverNameTable[] = {
{ "eng;en", (CHAR16 *) L"I2C Bus Driver" },
@@ -241,12 +241,12 @@ I2cBusComponentNameGetControllerName ( /**
Check if the child of I2C controller has been created.
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] Controller I2C controller handle.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
@param[in] RemainingHasControllerNode Indicate if RemainingDevicePath contains CONTROLLER_DEVICE_PATH.
@param[in] RemainingControllerNumber Controller number in CONTROLLER_DEVICE_PATH.
-
+
@retval EFI_SUCCESS The child of I2C controller is not created.
@retval Others The child of I2C controller has been created or other errors happen.
@@ -266,11 +266,11 @@ CheckRemainingDevicePath ( UINTN EntryCount;
UINTN Index;
BOOLEAN SystemHasControllerNode;
- UINT32 SystemControllerNumber;
+ UINT32 SystemControllerNumber;
SystemHasControllerNode = FALSE;
SystemControllerNumber = 0;
-
+
Status = gBS->OpenProtocolInformation (
Controller,
&gEfiI2cHostProtocolGuid,
@@ -280,7 +280,7 @@ CheckRemainingDevicePath ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
for (Index = 0; Index < EntryCount; Index++) {
if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {
Status = gBS->OpenProtocol (
@@ -294,7 +294,7 @@ CheckRemainingDevicePath ( if (!EFI_ERROR (Status)) {
//
// Find vendor device path node and compare
- //
+ //
while (!IsDevicePathEnd (SystemDevicePath)) {
if ((DevicePathType (SystemDevicePath) == HARDWARE_DEVICE_PATH) &&
(DevicePathSubType (SystemDevicePath) == HW_VENDOR_DP)) {
@@ -469,7 +469,7 @@ I2cBusDriverSupported ( //
// Determine if the I2C Host Protocol is available
//
- Status = gBS->OpenProtocol (
+ Status = gBS->OpenProtocol (
Controller,
&gEfiI2cHostProtocolGuid,
(VOID **) &I2cHost,
@@ -489,7 +489,7 @@ I2cBusDriverSupported ( if (Status == EFI_ALREADY_STARTED) {
- if ((RemainingDevicePath == NULL) ||
+ if ((RemainingDevicePath == NULL) ||
((RemainingDevicePath != NULL) && IsDevicePathEnd (RemainingDevicePath))) {
//
// If RemainingDevicePath is NULL or is the End of Device Path Node, return EFI_SUCCESS.
@@ -498,7 +498,7 @@ I2cBusDriverSupported ( } else {
//
// Test if the child with the RemainingDevicePath has already been created.
- //
+ //
Status = CheckRemainingDevicePath (
This,
Controller,
@@ -647,7 +647,7 @@ I2cBusDriverStart ( Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
-
+
/*
+----------------+
.->| I2C_BUS_CONTEXT|<----- This file Protocol (gEfiCallerIdGuid) installed on I2C Controller handle
@@ -660,7 +660,7 @@ I2cBusDriverStart ( | I2C IO Protocol Structure | <----- I2C IO Protocol
| |
+----------------------------+
-
+
*/
I2cBusContext->I2cHost = I2cHost;
I2cBusContext->I2cEnumerate = I2cEnumerate;
@@ -672,9 +672,9 @@ I2cBusDriverStart ( // Parent controller device path used to create children device path
//
I2cBusContext->ParentDevicePath = ParentDevicePath;
-
+
I2cBusContext->DriverBindingHandle = This->DriverBindingHandle;
-
+
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiCallerIdGuid,
@@ -698,7 +698,7 @@ Error: if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "I2cBus: Start() function failed, Status = %r\n", Status));
if (ParentDevicePath != NULL) {
- gBS->CloseProtocol (
+ gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
@@ -716,14 +716,14 @@ Error: }
if (I2cEnumerate != NULL) {
- gBS->CloseProtocol (
+ gBS->CloseProtocol (
Controller,
&gEfiI2cEnumerateProtocolGuid,
This->DriverBindingHandle,
Controller
);
}
-
+
if (I2cBusContext != NULL) {
Status = gBS->UninstallMultipleProtocolInterfaces (
&Controller,
@@ -783,7 +783,7 @@ I2cBusDriverStop ( UINTN Index;
if (NumberOfChildren == 0) {
- gBS->CloseProtocol (
+ gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
@@ -880,14 +880,14 @@ RegisterI2cDevice ( // Default DeviceIndex
//
RemainingPathDeviceIndex = 0;
-
+
//
// Determine the controller number in Controller Node Device Path when RemainingDevicePath is not NULL.
//
if (RemainingDevicePath != NULL) {
//
// Check if there is a controller node appended after vendor node
- //
+ //
DevPathNode = NextDevicePathNode (RemainingDevicePath);
if ((DevicePathType (DevPathNode) == HARDWARE_DEVICE_PATH) &&
(DevicePathSubType(DevPathNode) == HW_CONTROLLER_DP)) {
@@ -965,7 +965,7 @@ RegisterI2cDevice ( //
if ((!CompareGuid (&((VENDOR_DEVICE_PATH *)RemainingDevicePath)->Guid, Device->DeviceGuid)) ||
(RemainingPathDeviceIndex != Device->DeviceIndex)) {
- continue;
+ continue;
}
}
@@ -1015,7 +1015,7 @@ RegisterI2cDevice ( ReleaseI2cDeviceContext (I2cDeviceContext);
continue;
}
-
+
//
// Create the child handle
//
@@ -1040,7 +1040,7 @@ RegisterI2cDevice ( // Free resources for this I2C device
//
ReleaseI2cDeviceContext (I2cDeviceContext);
- continue;
+ continue;
}
if (RemainingDevicePath != NULL) {
@@ -1074,7 +1074,7 @@ RegisterI2cDevice ( The upper layer driver writer provides the following to the platform
vendor:
-
+
1. Vendor specific GUID for the I2C part
2. Guidance on proper construction of the slave address array when the
I2C device uses more than one slave address. The I2C bus protocol
@@ -1192,7 +1192,7 @@ ReleaseI2cDeviceContext ( if (I2cDeviceContext == NULL) {
return;
}
-
+
if (I2cDeviceContext->DevicePath != NULL) {
FreePool (I2cDeviceContext->DevicePath);
}
@@ -1282,12 +1282,12 @@ UnRegisterI2cDevice ( );
return Status;
}
-
+
//
// Free resources for this I2C device
//
ReleaseI2cDeviceContext (I2cDeviceContext);
-
+
return EFI_SUCCESS;
}
@@ -1310,12 +1310,12 @@ I2cBusDevicePathAppend ( )
{
EFI_DEVICE_PATH_PROTOCOL *PreviousDevicePath;
-
+
PreviousDevicePath = NULL;
//
// Build vendor device path
- //
+ //
CopyMem (&gVendorDevicePathTemplate.Guid, I2cDeviceContext->I2cDevice->DeviceGuid, sizeof (EFI_GUID));
I2cDeviceContext->DevicePath = AppendDevicePathNode (
I2cDeviceContext->I2cBusContext->ParentDevicePath,
@@ -1325,13 +1325,13 @@ I2cBusDevicePathAppend ( if (I2cDeviceContext->DevicePath == NULL) {
return EFI_OUT_OF_RESOURCES;
}
-
+
if ((BuildControllerNode) && (I2cDeviceContext->DevicePath != NULL)) {
//
// Build the final I2C device path with controller node
//
PreviousDevicePath = I2cDeviceContext->DevicePath;
- gControllerDevicePathTemplate.ControllerNumber = I2cDeviceContext->I2cDevice->DeviceIndex;
+ gControllerDevicePathTemplate.ControllerNumber = I2cDeviceContext->I2cDevice->DeviceIndex;
I2cDeviceContext->DevicePath = AppendDevicePathNode (
I2cDeviceContext->DevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) &gControllerDevicePathTemplate
@@ -1379,7 +1379,7 @@ InitializeI2cBus( );
ASSERT_EFI_ERROR (Status);
-
+
return Status;
}
diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cBusDxeExtra.uni b/MdeModulePkg/Bus/I2c/I2cDxe/I2cBusDxeExtra.uni index 374debe..e7e84fd 100644 --- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cBusDxeExtra.uni +++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cBusDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// I2cBusDxe Localized Strings and Content
//
-// Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"I2C Bus DXE Driver"
diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxe.h b/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxe.h index 1490d42..005dd3e 100644 --- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxe.h +++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxe.h @@ -4,7 +4,7 @@ This file defines common data structures, macro definitions and some module
internal function header files.
- Copyright (c) 2013, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -53,7 +53,7 @@ typedef struct { EFI_I2C_HOST_PROTOCOL *I2cHost;
EFI_HANDLE Controller;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
- EFI_HANDLE DriverBindingHandle;
+ EFI_HANDLE DriverBindingHandle;
} I2C_BUS_CONTEXT;
//
@@ -102,7 +102,7 @@ typedef struct { // Signature
//
UINT32 Signature;
-
+
//
// Next request in the pending request list
//
@@ -218,7 +218,7 @@ extern EFI_DRIVER_BINDING_PROTOCOL gI2cHostDriverBinding; @param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
@retval EFI_SUCCESS Driver API properly initialized
-
+
**/
EFI_STATUS
RegisterI2cDevice (
@@ -285,7 +285,7 @@ I2cBusDevicePathAppend ( The upper layer driver writer provides the following to the platform
vendor:
-
+
1. Vendor specific GUID for the I2C part
2. Guidance on proper construction of the slave address array when the
I2C device uses more than one slave address. The I2C bus protocol
@@ -524,7 +524,7 @@ I2cBusComponentNameGetDriverName ( IN CHAR8 *Language,
OUT CHAR16 **DriverName
);
-
+
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
@@ -789,7 +789,7 @@ I2cHostDriverStart ( IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
-
+
/**
Stops a device controller or a bus controller.
@@ -871,7 +871,7 @@ I2cHostComponentNameGetDriverName ( IN CHAR8 *Language,
OUT CHAR16 **DriverName
);
-
+
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxeExtra.uni b/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxeExtra.uni index 1f27927..17b0218 100644 --- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxeExtra.uni +++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// I2cDxe Localized Strings and Content
//
-// Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"I2C DXE Driver"
diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c b/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c index 68dd931..d745b6d 100644 --- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c +++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c @@ -1,9 +1,9 @@ /** @file
- This file implements I2C Host Protocol which provides callers with the ability to
+ This file implements I2C Host Protocol which provides callers with the ability to
do I/O transactions to all of the devices on the I2C bus.
Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>
- Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -26,7 +26,7 @@ EFI_DRIVER_BINDING_PROTOCOL gI2cHostDriverBinding = { };
//
-// Driver name table
+// Driver name table
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mI2cHostDriverNameTable[] = {
{ "eng;en", L"I2c Host Driver" },
@@ -356,7 +356,7 @@ I2cHostDriverStart ( //
// Locate I2C Master Protocol
//
- Status = gBS->OpenProtocol (
+ Status = gBS->OpenProtocol (
Controller,
&gEfiI2cMasterProtocolGuid,
(VOID **)&I2cMaster,
@@ -425,7 +425,7 @@ I2cHostDriverStart ( if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "I2cHost: create bus available event error, Status = %r\n", Status));
goto Exit;
- }
+ }
//
// Build the I2C host protocol for the current I2C controller
@@ -451,9 +451,9 @@ Exit: &gEfiI2cBusConfigurationManagementProtocolGuid,
This->DriverBindingHandle,
Controller
- );
+ );
}
-
+
if ((I2cHostContext != NULL) && (I2cHostContext->I2cEvent != NULL)) {
gBS->CloseEvent (I2cHostContext->I2cEvent);
I2cHostContext->I2cEvent = NULL;
@@ -513,7 +513,7 @@ I2cHostDriverStop ( IN EFI_HANDLE *ChildHandleBuffer
)
{
- EFI_STATUS Status;
+ EFI_STATUS Status;
I2C_HOST_CONTEXT *I2cHostContext;
EFI_I2C_HOST_PROTOCOL *I2cHost;
EFI_TPL TplPrevious;
@@ -543,14 +543,14 @@ I2cHostDriverStop ( // Raise TPL for critical section
//
TplPrevious = gBS->RaiseTPL (TPL_I2C_SYNC);
-
+
//
// If there is pending request or pending bus configuration, do not stop
//
Status = EFI_DEVICE_ERROR;
if (( !I2cHostContext->I2cBusConfigurationManagementPending )
&& IsListEmpty (&I2cHostContext->RequestList)) {
-
+
//
// Remove the I2C host protocol
//
@@ -561,7 +561,7 @@ I2cHostDriverStop ( NULL
);
}
-
+
//
// Leave critical section
//
@@ -581,12 +581,12 @@ I2cHostDriverStop ( gBS->CloseEvent (I2cHostContext->I2cBusConfigurationEvent);
I2cHostContext->I2cBusConfigurationEvent = NULL;
}
-
+
if (I2cHostContext->I2cEvent != NULL) {
gBS->CloseEvent (I2cHostContext->I2cEvent);
I2cHostContext->I2cEvent = NULL;
}
-
+
FreePool (I2cHostContext);
}
@@ -644,7 +644,7 @@ I2cHostI2cBusConfigurationAvailable ( // Force next operation to enable the I2C bus configuration
//
I2cHostContext->I2cBusConfiguration = (UINTN) -1;
-
+
//
// Do not continue current I2C request
//
@@ -666,7 +666,7 @@ I2cHostI2cBusConfigurationAvailable ( //
// Start an I2C operation on the host, the status is returned by I2cHostContext->Status
//
- Status = I2cMaster->StartRequest (
+ Status = I2cMaster->StartRequest (
I2cMaster,
I2cRequest->SlaveAddress,
I2cRequest->RequestPacket,
@@ -734,7 +734,7 @@ I2cHostRequestComplete ( if(!IsListEmpty (EntryHeader)) {
I2cHostRequestEnable (I2cHostContext);
}
-
+
return Status;
}
@@ -942,7 +942,7 @@ I2cHostQueueRequest ( if (RequestPacket == NULL) {
return EFI_INVALID_PARAMETER;
}
-
+
if ((SlaveAddress & I2C_ADDRESSING_10_BIT) != 0) {
//
// 10-bit address, bits 0-9 are used for 10-bit I2C slave addresses,
@@ -970,7 +970,7 @@ I2cHostQueueRequest ( //
// For synchronous transaction, register an event used to wait for finishing synchronous transaction
//
- Status = gBS->CreateEvent (
+ Status = gBS->CreateEvent (
0,
TPL_I2C_SYNC,
NULL,
@@ -981,7 +981,7 @@ I2cHostQueueRequest ( return Status;
}
}
-
+
//
// TPL should be at or below TPL_NOTIFY.
// For synchronous requests this routine must be called at or below TPL_CALLBACK.
@@ -1022,9 +1022,9 @@ I2cHostQueueRequest ( // Synchronize with the other threads
//
gBS->RaiseTPL ( TPL_I2C_SYNC );
-
+
FirstRequest = IsListEmpty (&I2cHostContext->RequestList);
-
+
//
// Insert new I2C request in the list
//
@@ -1034,7 +1034,7 @@ I2cHostQueueRequest ( // Release the thread synchronization
//
gBS->RestoreTPL (TplPrevious);
-
+
if (FirstRequest) {
//
// Start the first I2C request, then the subsequent of I2C request will continue
diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cHostDxeExtra.uni b/MdeModulePkg/Bus/I2c/I2cDxe/I2cHostDxeExtra.uni index 8166638..ed3b2d6 100644 --- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cHostDxeExtra.uni +++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cHostDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// I2cHostDxe Localized Strings and Content
//
-// Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"I2C Host DXE Driver"
diff --git a/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.c b/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.c index ff7bbef..b081561 100644 --- a/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.c +++ b/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.c @@ -1,14 +1,14 @@ /** @file
UEFI Component Name(2) protocol implementation for IsaBusDxe driver.
-
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
@@ -16,7 +16,7 @@ #include <Library/UefiLib.h>
//
-// Driver name table
+// Driver name table
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mIsaBusDriverNameTable[] = {
{ "eng;en", L"PI ISA BUS Driver" },
diff --git a/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.h b/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.h index f533971..41ec235 100644 --- a/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.h +++ b/MdeModulePkg/Bus/Isa/IsaBusDxe/ComponentName.h @@ -1,14 +1,14 @@ /** @file
UEFI Component Name(2) protocol implementation for IsaBusDxe driver.
-
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
diff --git a/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.c b/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.c index 0bd9b24..8aba2d3 100644 --- a/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.c +++ b/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.c @@ -3,7 +3,7 @@ Controller and installs the ISA Host Controller Service Binding protocol
on the ISA Host Controller's handle.
- Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -19,19 +19,19 @@ #include "ComponentName.h"
/**
- Tests to see if this driver supports a given controller. If a child device is provided,
+ Tests to see if this driver supports a given controller. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The handle of the controller to test. This handle
- must support a protocol interface that supplies
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For bus drivers, if this parameter is not NULL, then
- the bus driver must determine if the bus controller specified
- by ControllerHandle and the child controller specified
- by RemainingDevicePath are both supported by this
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
@@ -105,14 +105,14 @@ ISA_BUS_CHILD_PRIVATE_DATA mIsaBusChildPrivateTemplate = { /**
Creates a child handle and installs a protocol.
-
- The CreateChild() function installs a protocol on ChildHandle.
- If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle.
+
+ The CreateChild() function installs a protocol on ChildHandle.
+ If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle.
If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.
@param This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
@param ChildHandle Pointer to the handle of the child to create. If it is NULL,
- then a new handle is created. If it is a pointer to an existing UEFI handle,
+ then a new handle is created. If it is a pointer to an existing UEFI handle,
then the protocol is added to the existing UEFI handle.
@retval EFI_SUCCES The protocol was added to ChildHandle.
@@ -164,9 +164,9 @@ IsaBusCreateChild ( /**
Destroys a child handle with a protocol installed on it.
-
- The DestroyChild() function does the opposite of CreateChild(). It removes a protocol
- that was installed by CreateChild() from ChildHandle. If the removed protocol is the
+
+ The DestroyChild() function does the opposite of CreateChild(). It removes a protocol
+ that was installed by CreateChild() from ChildHandle. If the removed protocol is the
last protocol on ChildHandle, then ChildHandle is destroyed.
@param This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
@@ -260,18 +260,18 @@ ISA_BUS_PRIVATE_DATA mIsaBusPrivateTemplate = { Starts a device controller or a bus controller.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The handle of the controller to start. This handle
- must support a protocol interface that supplies
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For a bus driver, if this parameter is NULL, then handles
- for all the children of Controller are created by this driver.
- If this parameter is not NULL and the first Device Path Node is
- not the End of Device Path Node, then only the handle for the
- child device specified by the first Device Path Node of
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
RemainingDevicePath is created by this driver.
- If the first Device Path Node of RemainingDevicePath is
+ If the first Device Path Node of RemainingDevicePath is
the End of Device Path Node, no child handle is created by this
driver.
@@ -340,13 +340,13 @@ IsaBusDriverBindingStart ( /**
Stops a device controller or a bus controller.
-
+
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle A handle to the device being stopped. The handle must
- support a bus specific I/O protocol for the driver
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
- @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@@ -432,10 +432,10 @@ EFI_DRIVER_BINDING_PROTOCOL gIsaBusDriverBinding = { /**
Entry point of the IsaBusDxe driver.
-
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
-
+
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
**/
@@ -447,7 +447,7 @@ InitializeIsaBus ( )
{
EFI_STATUS Status;
-
+
Status = EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
diff --git a/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf b/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf index 1d9e22e..b257e99 100644 --- a/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf +++ b/MdeModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf @@ -6,7 +6,7 @@ # the ISA Host Controller and installs the ISA Host Controller Service Binding
# protocol on the ISA Host Controller's handle.
#
-# Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -56,9 +56,9 @@ DebugLib
[Protocols]
- ## CONSUMES
+ ## CONSUMES
## PRODUCES
- gEfiIsaHcProtocolGuid
+ gEfiIsaHcProtocolGuid
gEfiIsaHcServiceBindingProtocolGuid ## PRODUCES
[UserExtensions.TianoCore."ExtraFiles"]
diff --git a/MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KbdTextIn.c b/MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KbdTextIn.c index 5986eca..9eda6f5 100644 --- a/MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KbdTextIn.c +++ b/MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KbdTextIn.c @@ -718,7 +718,7 @@ KeyNotifyProcessHandler ( while (TRUE) {
//
// Enter critical section
- //
+ //
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
Status = PopEfikeyBufHead (&ConsoleIn->EfiKeyQueueForNotify, &KeyData);
//
diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/ComponentName.c b/MdeModulePkg/Bus/Pci/EhciDxe/ComponentName.c index 3181b9d..a5fb7ed 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/ComponentName.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/ComponentName.c @@ -1,8 +1,8 @@ /** @file
UEFI Component Name(2) protocol implementation for EHCI driver.
-Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c index f18ee82..30ad2b2 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c @@ -1,14 +1,14 @@ -/** @file
+/** @file
The Ehci controller driver.
- EhciDxe driver is responsible for managing the behavior of EHCI controller.
- It implements the interfaces of monitoring the status of all ports and transferring
+ EhciDxe driver is responsible for managing the behavior of EHCI controller.
+ It implements the interfaces of monitoring the status of all ports and transferring
Control, Bulk, Interrupt and Isochronous requests to Usb2.0 device.
Note that EhciDxe driver is enhanced to guarantee that the EHCI controller get attached
- to the EHCI controller before a UHCI or OHCI driver attaches to the companion UHCI or
- OHCI controller. This way avoids the control transfer on a shared port between EHCI
- and companion host controller when UHCI or OHCI gets attached earlier than EHCI and a
+ to the EHCI controller before a UHCI or OHCI driver attaches to the companion UHCI or
+ OHCI controller. This way avoids the control transfer on a shared port between EHCI
+ and companion host controller when UHCI or OHCI gets attached earlier than EHCI and a
USB 2.0 device inserts.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
@@ -1608,7 +1608,7 @@ EhcCreateUsb2Hc ( gBS->FreePool (Ehc);
return NULL;
}
-
+
EhcGetUsbDebugPortInfo (Ehc);
//
@@ -1781,12 +1781,12 @@ EhcDriverBindingStart ( goto CLOSE_PCIIO;
}
//
- // Determine if the device is UHCI or OHCI host controller or not. If yes, then find out the
+ // Determine if the device is UHCI or OHCI host controller or not. If yes, then find out the
// companion usb ehci host controller and force EHCI driver get attached to it before
// UHCI or OHCI driver attaches to UHCI or OHCI host controller.
//
if ((UsbClassCReg.ProgInterface == PCI_IF_UHCI || UsbClassCReg.ProgInterface == PCI_IF_OHCI) &&
- (UsbClassCReg.BaseCode == PCI_CLASS_SERIAL) &&
+ (UsbClassCReg.BaseCode == PCI_CLASS_SERIAL) &&
(UsbClassCReg.SubClassCode == PCI_CLASS_SERIAL_USB)) {
Status = PciIo->GetLocation (
PciIo,
@@ -1835,7 +1835,7 @@ EhcDriverBindingStart ( }
if ((UsbClassCReg.ProgInterface == PCI_IF_EHCI) &&
- (UsbClassCReg.BaseCode == PCI_CLASS_SERIAL) &&
+ (UsbClassCReg.BaseCode == PCI_CLASS_SERIAL) &&
(UsbClassCReg.SubClassCode == PCI_CLASS_SERIAL_USB)) {
Status = Instance->GetLocation (
Instance,
@@ -2098,7 +2098,7 @@ EhcDriverBindingStop ( }
//
- // Disable routing of all ports to EHCI controller, so all ports are
+ // Disable routing of all ports to EHCI controller, so all ports are
// routed back to the UHCI or OHCI controller.
//
EhcClearOpRegBit (Ehc, EHC_CONFIG_FLAG_OFFSET, CONFIGFLAG_ROUTE_EHC);
diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h index 3415816..f755675 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h +++ b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h @@ -2,7 +2,7 @@ Provides some data struct used by EHCI controller driver.
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -133,7 +133,7 @@ struct _USB2_HC_DEV { EFI_EVENT PollTimer;
//
- // ExitBootServicesEvent is used to stop the EHC DMA operation
+ // ExitBootServicesEvent is used to stop the EHC DMA operation
// after exit boot service.
//
EFI_EVENT ExitBootServiceEvent;
diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf b/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf index 238923e..bc6bd4c 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf @@ -1,14 +1,14 @@ ## @file
# The EhciDxe driver is responsible for managing the behavior of EHCI controller.
-# It implements the interfaces of monitoring the status of all ports and transferring
+# It implements the interfaces of monitoring the status of all ports and transferring
# Control, Bulk, Interrupt and Isochronous requests to Usb2.0 device.
#
# Note that EhciDxe driver is enhanced to guarantee that the EHCI controller get attached
-# to the EHCI controller before the UHCI driver attaches to the companion UHCI controller.
+# to the EHCI controller before the UHCI driver attaches to the companion UHCI controller.
# This way avoids the control transfer on a shared port between EHCI and companion host
# controller when UHCI gets attached earlier than EHCI and a USB 2.0 device inserts.
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -36,7 +36,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC ARM AARCH64
#
-# DRIVER_BINDING = gEhciDriverBinding
+# DRIVER_BINDING = gEhciDriverBinding
# COMPONENT_NAME = gEhciComponentName
# COMPONENT_NAME2 = gEhciComponentName2
#
diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.uni b/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.uni index e36ee52..eb930ab 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.uni +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.uni @@ -3,19 +3,19 @@ //
// It implements the interfaces of monitoring the status of all ports and transferring
// Control, Bulk, Interrupt and Isochronous requests to Usb2.0 device.
-//
+//
// Note that EhciDxe driver is enhanced to guarantee that the EHCI controller get attached
// to the EHCI controller before the UHCI driver attaches to the companion UHCI controller.
// This way avoids the control transfer on a shared port between EHCI and companion host
// controller when UHCI gets attached earlier than EHCI and a USB 2.0 device inserts.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxeExtra.uni b/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxeExtra.uni index 1d625a9..8bce7f9 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// EhciDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"EHCI Controller DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c index 036c00b..fea6f47 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c @@ -2,7 +2,7 @@ EHCI transfer scheduling routines.
-Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -918,7 +918,7 @@ EhcUpdateAsyncRequest ( //
// calculate physical address by offset.
//
- PciAddr = (UINTN)Urb->DataPhy + ((UINTN)Qtd->Data - (UINTN)Urb->Data);
+ PciAddr = (UINTN)Urb->DataPhy + ((UINTN)Qtd->Data - (UINTN)Urb->Data);
QtdHw->Page[0] = EHC_LOW_32BIT (PciAddr);
QtdHw->PageHigh[0]= EHC_HIGH_32BIT (PciAddr);
}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c index 5cad25e..6abd3d4 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c @@ -2,8 +2,8 @@ PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -39,7 +39,7 @@ USB_PORT_STATE_MAP mUsbPortChangeMap[] = { /**
Read Ehc Operation register.
-
+
@param Ehc The EHCI device.
@param Offset The operation register offset.
@@ -53,17 +53,17 @@ EhcReadOpReg ( )
{
UINT32 Data;
-
+
ASSERT (Ehc->CapLen != 0);
Data = MmioRead32 (Ehc->UsbHostControllerBaseAddress + Ehc->CapLen + Offset);
-
+
return Data;
}
/**
Write the data to the EHCI operation register.
-
+
@param Ehc The EHCI device.
@param Offset EHCI operation register offset.
@param Data The data to write.
@@ -85,7 +85,7 @@ EhcWriteOpReg ( /**
Set one bit of the operational register while keeping other bits.
-
+
@param Ehc The EHCI device.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to set.
@@ -107,7 +107,7 @@ EhcSetOpRegBit ( /**
Clear one bit of the operational register while keeping other bits.
-
+
@param Ehc The EHCI device.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to clear.
@@ -128,9 +128,9 @@ EhcClearOpRegBit ( }
/**
- Wait the operation register's bit as specified by Bit
+ Wait the operation register's bit as specified by Bit
to become set (or clear).
-
+
@param Ehc The EHCI device.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to wait for.
@@ -165,7 +165,7 @@ EhcWaitOpRegBit ( /**
Read EHCI capability register.
-
+
@param Ehc The EHCI device.
@param Offset Capability register address.
@@ -179,16 +179,16 @@ EhcReadCapRegister ( )
{
UINT32 Data;
-
+
Data = MmioRead32(Ehc->UsbHostControllerBaseAddress + Offset);
-
+
return Data;
}
/**
Set door bell and wait it to be ACKed by host controller.
This function is used to synchronize with the hardware.
-
+
@param Ehc The EHCI device.
@param Timeout The time to wait before abort (in millisecond, ms).
@@ -223,9 +223,9 @@ EhcSetAndWaitDoorBell ( }
/**
- Clear all the interrutp status bits, these bits
+ Clear all the interrutp status bits, these bits
are Write-Clean.
-
+
@param Ehc The EHCI device.
**/
@@ -238,9 +238,9 @@ EhcAckAllInterrupt ( }
/**
- Enable the periodic schedule then wait EHC to
+ Enable the periodic schedule then wait EHC to
actually enable it.
-
+
@param Ehc The EHCI device.
@param Timeout The time to wait before abort (in millisecond, ms).
@@ -264,7 +264,7 @@ EhcEnablePeriodSchd ( /**
Enable asynchrounous schedule.
-
+
@param Ehc The EHCI device.
@param Timeout Time to wait before abort.
@@ -288,7 +288,7 @@ EhcEnableAsyncSchd ( /**
Check whether Ehc is halted.
-
+
@param Ehc The EHCI device.
@retval TRUE The controller is halted.
@@ -305,7 +305,7 @@ EhcIsHalt ( /**
Check whether system error occurred.
-
+
@param Ehc The EHCI device.
@retval TRUE System error happened.
@@ -322,7 +322,7 @@ EhcIsSysError ( /**
Reset the host controller.
-
+
@param Ehc The EHCI device.
@param Timeout Time to wait before abort (in millisecond, ms).
@@ -356,7 +356,7 @@ EhcResetHC ( /**
Halt the host controller.
-
+
@param Ehc The EHCI device.
@param Timeout Time to wait before abort.
@@ -379,7 +379,7 @@ EhcHaltHC ( /**
Set the EHCI to run.
-
+
@param Ehc The EHCI device.
@param Timeout Time to wait before abort.
@@ -402,7 +402,7 @@ EhcRunHC ( /**
Power On All EHCI Ports.
-
+
@param Ehc The EHCI device.
**/
@@ -414,7 +414,7 @@ EhcPowerOnAllPorts ( UINT8 PortNumber;
UINT8 Index;
UINT32 RegVal;
-
+
PortNumber = (UINT8)(Ehc->HcStructParams & HCSP_NPORTS);
for (Index = 0; Index < PortNumber; Index++) {
//
@@ -429,14 +429,14 @@ EhcPowerOnAllPorts ( }
/**
- Initialize the HC hardware.
+ Initialize the HC hardware.
EHCI spec lists the five things to do to initialize the hardware.
1. Program CTRLDSSEGMENT.
2. Set USBINTR to enable interrupts.
3. Set periodic list base.
4. Set USBCMD, interrupt threshold, frame list size etc.
5. Write 1 to CONFIGFLAG to route all ports to EHCI.
-
+
@param Ehc The EHCI device.
@retval EFI_SUCCESS The EHCI has come out of halt state.
@@ -451,7 +451,7 @@ EhcInitHC ( EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS TempPtr;
UINTN PageNumber;
-
+
ASSERT (EhcIsHalt (Ehc));
//
@@ -472,9 +472,9 @@ EhcInitHC ( return Status;
}
- EhcPowerOnAllPorts (Ehc);
+ EhcPowerOnAllPorts (Ehc);
MicroSecondDelay (EHC_ROOT_PORT_RECOVERY_STALL);
-
+
Status = EhcInitSched (Ehc);
if (EFI_ERROR (Status)) {
@@ -523,26 +523,26 @@ EhcInitHC ( /**
Submits bulk transfer to a bulk endpoint of a USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
@param DeviceAddress Target device address.
@param EndPointAddress Endpoint number and its direction in bit 7.
- @param DeviceSpeed Device speed, Low speed device doesn't support
+ @param DeviceSpeed Device speed, Low speed device doesn't support
bulk transfer.
- @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
sending or receiving.
- @param Data Array of pointers to the buffers of data to transmit
+ @param Data Array of pointers to the buffers of data to transmit
from or receive into.
@param DataLength The lenght of the data buffer.
@param DataToggle On input, the initial data toggle for the transfer;
- On output, it is updated to to next data toggle to use of
+ On output, it is updated to to next data toggle to use of
the subsequent bulk transfer.
@param TimeOut Indicates the maximum time, in millisecond, which the
transfer is allowed to complete.
If Timeout is 0, then the caller must wait for the function
to be completed until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
- @param Translator A pointr to the transaction translator data.
+ @param Translator A pointr to the transaction translator data.
@param TransferResult A pointer to the detailed result information of the
bulk transfer.
@@ -577,7 +577,7 @@ EhcBulkTransfer ( //
// Validate the parameters
//
- if ((DataLength == NULL) || (*DataLength == 0) ||
+ if ((DataLength == NULL) || (*DataLength == 0) ||
(Data == NULL) || (Data[0] == NULL) || (TransferResult == NULL)) {
return EFI_INVALID_PARAMETER;
}
@@ -652,10 +652,10 @@ ON_EXIT: Retrieves the number of root hub ports.
@param[in] PeiServices The pointer to the PEI Services Table.
- @param[in] This The pointer to this instance of the
+ @param[in] This The pointer to this instance of the
PEI_USB2_HOST_CONTROLLER_PPI.
- @param[out] PortNumber The pointer to the number of the root hub ports.
-
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
@retval EFI_SUCCESS The port number was retrieved successfully.
@retval EFI_INVALID_PARAMETER PortNumber is NULL.
@@ -671,19 +671,19 @@ EhcGetRootHubPortNumber ( PEI_USB2_HC_DEV *EhcDev;
EhcDev = PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS (This);
-
+
if (PortNumber == NULL) {
return EFI_INVALID_PARAMETER;
- }
-
+ }
+
*PortNumber = (UINT8)(EhcDev->HcStructParams & HCSP_NPORTS);
return EFI_SUCCESS;
-
+
}
/**
Clears a feature for the specified root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
@param PortNumber Specifies the root hub port whose feature
@@ -691,7 +691,7 @@ EhcGetRootHubPortNumber ( @param PortFeature Indicates the feature selector associated with the
feature clear request.
- @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
for the USB root hub port specified by PortNumber.
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
@@ -805,7 +805,7 @@ ON_EXIT: /**
Sets a feature for the specified root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI
@param PortNumber Root hub port to set.
@@ -876,7 +876,7 @@ EhcSetRootHubPortFeature ( break;
}
}
-
+
//
// Set one to PortReset bit must also set zero to PortEnable bit
//
@@ -907,10 +907,10 @@ ON_EXIT: /**
Retrieves the current status of a USB root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
- @param PortNumber The root hub port to retrieve the state from.
+ @param PortNumber The root hub port to retrieve the state from.
@param PortStatus Variable to receive the port state.
@retval EFI_SUCCESS The status of the USB root hub port specified.
@@ -957,9 +957,9 @@ EhcGetRootHubPortStatus ( //
// Identify device speed. If in K state, it is low speed.
- // If the port is enabled after reset, the device is of
+ // If the port is enabled after reset, the device is of
// high speed. The USB bus driver should retrieve the actual
- // port speed after reset.
+ // port speed after reset.
//
if (EHC_BIT_IS_SET (State, PORTSC_LINESTATE_K)) {
PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
@@ -967,7 +967,7 @@ EhcGetRootHubPortStatus ( } else if (EHC_BIT_IS_SET (State, PORTSC_ENABLED)) {
PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
}
-
+
//
// Convert the EHCI port/port change state to UEFI status
//
@@ -993,12 +993,12 @@ ON_EXIT: /**
Submits control transfer to a target USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
@param DeviceAddress The target device address.
@param DeviceSpeed Target device speed.
- @param MaximumPacketLength Maximum packet size the default control transfer
+ @param MaximumPacketLength Maximum packet size the default control transfer
endpoint is capable of sending or receiving.
@param Request USB device request to send.
@param TransferDirection Specifies the data direction for the data stage.
@@ -1052,12 +1052,12 @@ EhcControlTransfer ( return EFI_INVALID_PARAMETER;
}
- if ((TransferDirection == EfiUsbNoData) &&
+ if ((TransferDirection == EfiUsbNoData) &&
((Data != NULL) || (*DataLength != 0))) {
return EFI_INVALID_PARAMETER;
}
- if ((TransferDirection != EfiUsbNoData) &&
+ if ((TransferDirection != EfiUsbNoData) &&
((Data == NULL) || (*DataLength == 0))) {
return EFI_INVALID_PARAMETER;
}
@@ -1225,7 +1225,7 @@ EhcPeimEntry ( if (EFI_ERROR (Status)) {
break;
}
-
+
//
// This PEIM is for UHC type controller.
//
@@ -1303,19 +1303,19 @@ EhcPeimEntry ( **/
EFI_STATUS
InitializeUsbHC (
- IN PEI_USB2_HC_DEV *EhcDev
+ IN PEI_USB2_HC_DEV *EhcDev
)
{
EFI_STATUS Status;
-
+
EhcResetHC (EhcDev, EHC_RESET_TIMEOUT);
Status = EhcInitHC (EhcDev);
if (EFI_ERROR (Status)) {
- return EFI_ABORTED;
+ return EFI_ABORTED;
}
-
+
return EFI_SUCCESS;
}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h index 715a5ab..be4237d 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h @@ -1,8 +1,8 @@ /** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -118,20 +118,20 @@ struct _PEI_USB2_HC_DEV { //
PEI_EHC_QTD *ShortReadStop;
EFI_EVENT PollTimer;
-
+
//
- // Asynchronous(bulk and control) transfer schedule data:
+ // Asynchronous(bulk and control) transfer schedule data:
// ReclaimHead is used as the head of the asynchronous transfer
- // list. It acts as the reclamation header.
+ // list. It acts as the reclamation header.
//
PEI_EHC_QH *ReclaimHead;
-
+
//
// Periodic (interrupt) transfer schedule data:
//
- VOID *PeriodFrame; // Mapped as common buffer
+ VOID *PeriodFrame; // Mapped as common buffer
VOID *PeriodFrameMap;
-
+
PEI_EHC_QH *PeriodOne;
EFI_LIST_ENTRY AsyncIntTransfers;
@@ -156,14 +156,14 @@ struct _PEI_USB2_HC_DEV { **/
EFI_STATUS
InitializeUsbHC (
- IN PEI_USB2_HC_DEV *EhcDev
+ IN PEI_USB2_HC_DEV *EhcDev
);
/**
Initialize the memory management pool for the host controller.
-
+
@param Ehc The EHCI device.
- @param Check4G Whether the host controller requires allocated memory
+ @param Check4G Whether the host controller requires allocated memory
from one 4G address space.
@param Which4G The 4G memory area each memory allocated should be from.
@@ -178,7 +178,7 @@ UsbHcInitMemPool ( IN UINT32 Which4G
)
;
-
+
/**
Release the memory management pool.
@@ -199,7 +199,7 @@ UsbHcFreeMemPool ( /**
Allocate some memory from the host controller's memory pool
which can be used to communicate with host controller.
-
+
@param Ehc The EHCI device.
@param Pool The host controller's memory pool.
@param Size Size of the memory to allocate.
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf index 813ccc9..74c13db 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf @@ -4,14 +4,14 @@ # It produces gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
# which is used to enable recovery function from USB Drivers.
#
-# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions
# of the BSD License which accompanies this distribution. The
# full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
-#
+#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.uni b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.uni index 9bc809c..e633014 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.uni +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.uni @@ -4,14 +4,14 @@ // It produces gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
// which is used to enable recovery function from USB Drivers.
//
-// Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciPeiExtra.uni b/MdeModulePkg/Bus/Pci/EhciPei/EhciPeiExtra.uni index cbf1b7d..4319fe2 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciPeiExtra.uni +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// EhciPei Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
@@ -14,8 +14,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"EHCI PEI Module for Recovery"
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciReg.h b/MdeModulePkg/Bus/Pci/EhciPei/EhciReg.h index 34c61d8..14d3f77 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciReg.h +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciReg.h @@ -1,8 +1,8 @@ /** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -94,8 +94,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #define EHCI_IS_DATAIN(EndpointAddr) EHC_BIT_IS_SET((EndpointAddr), 0x80)
//
-// Structure to map the hardware port states to the
-// UEFI's port states.
+// Structure to map the hardware port states to the
+// UEFI's port states.
//
typedef struct {
UINT16 HwState;
@@ -116,7 +116,7 @@ typedef struct { /**
Read EHCI capability register.
-
+
@param Ehc The EHCI device.
@param Offset Capability register address.
@@ -132,7 +132,7 @@ EhcReadCapRegister ( /**
Read Ehc Operation register.
-
+
@param Ehc The EHCI device.
@param Offset The operation register offset.
@@ -148,7 +148,7 @@ EhcReadOpReg ( /**
Write the data to the EHCI operation register.
-
+
@param Ehc The EHCI device.
@param Offset EHCI operation register offset.
@param Data The data to write.
@@ -164,7 +164,7 @@ EhcWriteOpReg ( /**
Stop the legacy USB SMI support.
-
+
@param Ehc The EHCI device.
**/
@@ -177,7 +177,7 @@ EhcClearLegacySupport ( /**
Set door bell and wait it to be ACKed by host controller.
This function is used to synchronize with the hardware.
-
+
@param Ehc The EHCI device.
@param Timeout The time to wait before abort (in millisecond, ms).
@@ -193,9 +193,9 @@ EhcSetAndWaitDoorBell ( ;
/**
- Clear all the interrutp status bits, these bits
+ Clear all the interrutp status bits, these bits
are Write-Clean.
-
+
@param Ehc The EHCI device.
**/
@@ -207,7 +207,7 @@ EhcAckAllInterrupt ( /**
Check whether Ehc is halted.
-
+
@param Ehc The EHCI device.
@retval TRUE The controller is halted.
@@ -222,7 +222,7 @@ EhcIsHalt ( /**
Check whether system error occurred.
-
+
@param Ehc The EHCI device.
@retval TRUE System error happened.
@@ -237,7 +237,7 @@ EhcIsSysError ( /**
Reset the host controller.
-
+
@param Ehc The EHCI device.
@param Timeout Time to wait before abort (in millisecond, ms).
@@ -254,7 +254,7 @@ EhcResetHC ( /**
Halt the host controller.
-
+
@param Ehc The EHCI device.
@param Timeout Time to wait before abort.
@@ -271,7 +271,7 @@ EhcHaltHC ( /**
Set the EHCI to run
-
+
@param Ehc The EHCI device.
@param Timeout Time to wait before abort.
@@ -287,14 +287,14 @@ EhcRunHC ( ;
/**
- Initialize the HC hardware.
+ Initialize the HC hardware.
EHCI spec lists the five things to do to initialize the hardware.
1. Program CTRLDSSEGMENT.
2. Set USBINTR to enable interrupts.
3. Set periodic list base.
4. Set USBCMD, interrupt threshold, frame list size etc.
5. Write 1 to CONFIGFLAG to route all ports to EHCI.
-
+
@param Ehc The EHCI device.
@retval EFI_SUCCESS The EHCI has come out of halt state.
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c index 6b19362..65bc84f 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c @@ -2,8 +2,8 @@ PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -19,7 +19,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. /**
Create helper QTD/QH for the EHCI device.
-
+
@param Ehc The EHCI device.
@retval EFI_OUT_OF_RESOURCES Failed to allocate resource for helper QTD/QH.
@@ -95,7 +95,7 @@ EhcCreateHelpQ ( /**
Initialize the schedule data structure such as frame list.
-
+
@param Ehc The EHCI device to init schedule data for.
@retval EFI_OUT_OF_RESOURCES Failed to allocate resource to init schedule data.
@@ -162,7 +162,7 @@ EhcInitSched ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
//
// Initialize the frame list entries then set the registers
//
@@ -186,8 +186,8 @@ EhcInitSched ( /**
Free the schedule data. It may be partially initialized.
-
- @param Ehc The EHCI device.
+
+ @param Ehc The EHCI device.
**/
VOID
@@ -230,7 +230,7 @@ EhcFreeSched ( due to its interfaces. This simplifies the AsynList
management: A reclamation header is always linked to
the AsyncListAddr, the only active QH is appended to it.
-
+
@param Ehc The EHCI device.
@param Qh The queue head to link.
@@ -260,7 +260,7 @@ EhcLinkQhToAsync ( /**
Unlink a queue head from the asynchronous schedule list.
Need to synchronize with hardware.
-
+
@param Ehc The EHCI device.
@param Qh The queue head to unlink.
@@ -291,13 +291,13 @@ EhcUnlinkQhFromAsync ( // Set and wait the door bell to synchronize with the hardware
//
EhcSetAndWaitDoorBell (Ehc, EHC_GENERIC_TIMEOUT);
-
+
return;
}
/**
Check the URB's execution result and update the URB's
- result accordingly.
+ result accordingly.
@param Ehc The EHCI device.
@param Urb The URB to check result.
@@ -358,13 +358,13 @@ EhcCheckUrbResult ( Finished = TRUE;
goto ON_EXIT;
-
+
} else if (EHC_BIT_IS_SET (State, QTD_STAT_ACTIVE)) {
//
// The QTD is still active, no need to check furthur.
//
Urb->Result |= EFI_USB_ERR_NOTEXECUTE;
-
+
Finished = FALSE;
goto ON_EXIT;
@@ -387,7 +387,7 @@ EhcCheckUrbResult ( // Status Stage of the setup transfer to get the finial result
//
if (QtdHw->AltNext == QTD_LINK (Ehc->ShortReadStop, FALSE)) {
-
+
Finished = TRUE;
goto ON_EXIT;
}
@@ -412,7 +412,7 @@ ON_EXIT: /**
Execute the transfer by polling the URB. This is a synchronous operation.
-
+
@param Ehc The EHCI device.
@param Urb The URB to execute.
@param TimeOut The time to wait before abort, in millisecond.
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h index 6cc52f8..ebe407c 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.h @@ -1,8 +1,8 @@ /** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -19,7 +19,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. /**
Initialize the schedule data structure such as frame list.
-
+
@param Ehc The EHCI device to init schedule data for.
@retval EFI_OUT_OF_RESOURCES Failed to allocate resource to init schedule data.
@@ -34,7 +34,7 @@ EhcInitSched ( /**
Free the schedule data. It may be partially initialized.
-
+
@param Ehc The EHCI device.
**/
@@ -50,7 +50,7 @@ EhcFreeSched ( due to its interfaces. This simplifies the AsynList
management: A reclamation header is always linked to
the AsyncListAddr, the only active QH is appended to it.
-
+
@param Ehc The EHCI device.
@param Qh The queue head to link.
@@ -65,7 +65,7 @@ EhcLinkQhToAsync ( /**
Unlink a queue head from the asynchronous schedule list.
Need to synchronize with hardware.
-
+
@param Ehc The EHCI device.
@param Qh The queue head to unlink.
@@ -79,7 +79,7 @@ EhcUnlinkQhFromAsync ( /**
Execute the transfer by polling the URB. This is a synchronous operation.
-
+
@param Ehc The EHCI device.
@param Urb The URB to execute.
@param TimeOut The time to wait before abort, in millisecond.
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c index baacf5d..a766f70 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c @@ -2,8 +2,8 @@ PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -20,7 +20,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. /**
Delete a single asynchronous interrupt transfer for
the device and endpoint.
-
+
@param Ehc The EHCI device.
@param Data Current data not associated with a QTD.
@param DataLen The length of the data.
@@ -96,7 +96,7 @@ EhcCreateQtd ( Len += ThisBufLen;
Data += ThisBufLen;
}
-
+
//
// Need to fix the last pointer if the Qtd can't hold all the
// user's data to make sure that the length is in the unit of
@@ -120,7 +120,7 @@ EhcCreateQtd ( 1. SplitXState in the Status field.
2. Microframe S-mask.
3. Microframe C-mask.
-
+
@param Ep The queue head's related endpoint.
@param QhHw The queue head to initialize.
@@ -142,7 +142,7 @@ EhcInitIntQh ( QhHw->SMask = QH_MICROFRAME_0;
return ;
}
-
+
//
// For low/full speed device, the transfer must go through
// the split transaction. Need to update three fields
@@ -160,7 +160,7 @@ EhcInitIntQh ( /**
Allocate and initialize a EHCI queue head.
-
+
@param Ehci The EHCI device.
@param Ep The endpoint to create queue head for.
@@ -185,7 +185,7 @@ EhcCreateQh ( Qh->Signature = EHC_QH_SIG;
Qh->NextQh = NULL;
Qh->Interval = Ep->PollRate;
-
+
InitializeListHead (&Qh->Qtds);
QhHw = &Qh->QhHw;
@@ -250,7 +250,7 @@ EhcCreateQh ( can't support high speed endpoint with a interval less
than 8 microframe because interval is specified in
the unit of ms (millisecond).
-
+
@param Interval The interval to convert.
@retval The converted interval.
@@ -266,7 +266,7 @@ EhcConvertPollRate ( if (Interval == 0) {
return 1;
}
-
+
//
// Find the index (1 based) of the highest non-zero bit
//
@@ -282,7 +282,7 @@ EhcConvertPollRate ( /**
Free a list of QTDs.
-
+
@param Ehc The EHCI device.
@param Qtds The list head of the QTD.
@@ -307,7 +307,7 @@ EhcFreeQtds ( /**
Free an allocated URB. It is possible for it to be partially inited.
-
+
@param Ehc The EHCI device.
@param Urb The URB to free.
@@ -338,7 +338,7 @@ EhcFreeUrb ( /**
Create a list of QTDs for the URB.
-
+
@param Ehc The EHCI device.
@param Urb The URB to create QTDs for.
@@ -380,7 +380,7 @@ EhcCreateQtds ( if (Ep->Direction == EfiUsbDataIn) {
AlterNext = QTD_LINK (Ehc->ShortReadStop, FALSE);
}
-
+
//
// Build the Setup and status packets for control transfer
//
@@ -457,7 +457,7 @@ EhcCreateQtds ( Len += Qtd->DataLen;
}
-
+
//
// Insert the status packet for control transfer
//
@@ -496,7 +496,7 @@ ON_ERROR: /**
Create a new URB and its associated QTD.
-
+
@param Ehc The EHCI device.
@param DevAddr The device address.
@param EpAddr Endpoint addrress & its direction.
@@ -519,7 +519,7 @@ PEI_URB * EhcCreateUrb (
IN PEI_USB2_HC_DEV *Ehc,
IN UINT8 DevAddr,
- IN UINT8 EpAddr,
+ IN UINT8 EpAddr,
IN UINT8 DevSpeed,
IN UINT8 Toggle,
IN UINTN MaxPacket,
@@ -540,7 +540,7 @@ EhcCreateUrb ( UINTN Len;
PEI_URB *Urb;
VOID *Map;
-
+
Urb = Ehc->Urb;
Urb->Signature = EHC_URB_SIG;
InitializeListHead (&Urb->UrbList);
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.h b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.h index 3fe93fb..009b67d 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.h +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.h @@ -1,8 +1,8 @@ /** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -73,7 +73,7 @@ typedef struct _PEI_URB PEI_URB; #define USB_ERR_SHORT_PACKET 0x200
//
-// Fill in the hardware link point: pass in a EHC_QH/QH_HW
+// Fill in the hardware link point: pass in a EHC_QH/QH_HW
// pointer to QH_LINK; A EHC_QTD/QTD_HW pointer to QTD_LINK
//
#define QH_LINK(Addr, Type, Term) \
@@ -82,16 +82,16 @@ typedef struct _PEI_URB PEI_URB; #define QTD_LINK(Addr, Term) QH_LINK((Addr), 0, (Term))
//
-// The defination of EHCI hardware used data structure for
-// little endian architecture. The QTD and QH structures
-// are required to be 32 bytes aligned. Don't add members
+// The defination of EHCI hardware used data structure for
+// little endian architecture. The QTD and QH structures
+// are required to be 32 bytes aligned. Don't add members
// to the head of the associated software strucuture.
//
#pragma pack(1)
typedef struct {
UINT32 NextQtd;
UINT32 AltNext;
-
+
UINT32 Status : 8;
UINT32 Pid : 2;
UINT32 ErrCnt : 2;
@@ -105,7 +105,7 @@ typedef struct { } QTD_HW;
typedef struct {
- UINT32 HorizonLink;
+ UINT32 HorizonLink;
//
// Endpoint capabilities/Characteristics DWord 1 and DWord 2
//
@@ -131,7 +131,7 @@ typedef struct { UINT32 CurQtd;
UINT32 NextQtd;
UINT32 AltQtd;
-
+
UINT32 Status : 8;
UINT32 Pid : 2;
UINT32 ErrCnt : 2;
@@ -163,7 +163,7 @@ typedef struct _USB_ENDPOINT { } USB_ENDPOINT;
//
-// Software QTD strcture, this is used to manage all the
+// Software QTD strcture, this is used to manage all the
// QTD generated from a URB. Don't add fields before QtdHw.
//
struct _PEI_EHC_QTD {
@@ -177,17 +177,17 @@ struct _PEI_EHC_QTD { //
-// Software QH structure. All three different transaction types
-// supported by UEFI USB, that is the control/bulk/interrupt
-// transfers use the queue head and queue token strcuture.
+// Software QH structure. All three different transaction types
+// supported by UEFI USB, that is the control/bulk/interrupt
+// transfers use the queue head and queue token strcuture.
//
// Interrupt QHs are linked to periodic frame list in the reversed
-// 2^N tree. Each interrupt QH is linked to the list starting at
+// 2^N tree. Each interrupt QH is linked to the list starting at
// frame 0. There is a dummy interrupt QH linked to each frame as
// a sentinental whose polling interval is 1. Synchronous interrupt
-// transfer is linked after this dummy QH.
-//
-// For control/bulk transfer, only synchronous (in the sense of UEFI)
+// transfer is linked after this dummy QH.
+//
+// For control/bulk transfer, only synchronous (in the sense of UEFI)
// transfer is supported. A dummy QH is linked to EHCI AsyncListAddr
// as the reclamation header. New transfer is inserted after this QH.
//
@@ -196,17 +196,17 @@ struct _PEI_EHC_QH { UINT32 Signature;
PEI_EHC_QH *NextQh; // The queue head pointed to by horizontal link
EFI_LIST_ENTRY Qtds; // The list of QTDs to this queue head
- UINTN Interval;
+ UINTN Interval;
};
//
-// URB (Usb Request Block) contains information for all kinds of
+// URB (Usb Request Block) contains information for all kinds of
// usb requests.
//
struct _PEI_URB {
UINT32 Signature;
EFI_LIST_ENTRY UrbList;
-
+
//
// Transaction information
//
@@ -218,14 +218,14 @@ struct _PEI_URB { UINTN DataLen;
VOID *DataPhy; // Address of the mapped user data
VOID *DataMap;
- EFI_ASYNC_USB_TRANSFER_CALLBACK Callback;
+ EFI_ASYNC_USB_TRANSFER_CALLBACK Callback;
VOID *Context;
//
// Schedule data
//
PEI_EHC_QH *Qh;
-
+
//
// Transaction result
//
@@ -237,7 +237,7 @@ struct _PEI_URB { /**
Delete a single asynchronous interrupt transfer for
the device and endpoint.
-
+
@param Ehc The EHCI device.
@param Data Current data not associated with a QTD.
@param DataLen The length of the data.
@@ -261,7 +261,7 @@ EhcCreateQtd ( /**
Allocate and initialize a EHCI queue head.
-
+
@param Ehci The EHCI device.
@param Ep The endpoint to create queue head for.
@@ -277,7 +277,7 @@ EhcCreateQh ( /**
Free an allocated URB. It is possible for it to be partially inited.
-
+
@param Ehc The EHCI device.
@param Urb The URB to free.
@@ -291,7 +291,7 @@ EhcFreeUrb ( /**
Create a new URB and its associated QTD.
-
+
@param Ehc The EHCI device.
@param DevAddr The device address.
@param EpAddr Endpoint addrress & its direction.
@@ -314,7 +314,7 @@ PEI_URB * EhcCreateUrb (
IN PEI_USB2_HC_DEV *Ehc,
IN UINT8 DevAddr,
- IN UINT8 EpAddr,
+ IN UINT8 EpAddr,
IN UINT8 DevSpeed,
IN UINT8 Toggle,
IN UINTN MaxPacket,
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c index a0419bd..3cc31f5 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c +++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c @@ -2,8 +2,8 @@ PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -54,28 +54,28 @@ UsbHcAllocMemBlock ( return NULL;
}
ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
-
+
//
// each bit in the bit array represents USBHC_MEM_UNIT
// bytes of memory in the memory block.
//
ASSERT (USBHC_MEM_UNIT * 8 <= EFI_PAGE_SIZE);
-
+
Block = (USBHC_MEM_BLOCK*)(UINTN)TempPtr;
Block->BufLen = EFI_PAGES_TO_SIZE (Pages);
Block->BitsLen = Block->BufLen / (USBHC_MEM_UNIT * 8);
-
+
PageNumber = (Block->BitsLen)/PAGESIZE +1;
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
PageNumber,
&TempPtr
);
-
+
if (EFI_ERROR (Status)) {
return NULL;
}
- ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
+ ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
Block->Bits = (UINT8 *)(UINTN)TempPtr;
@@ -184,7 +184,7 @@ UsbHcAllocMemFromBlock ( if (Available < Units) {
return NULL;
}
-
+
//
// Mark the memory as allocated
//
@@ -283,7 +283,7 @@ UsbHcIsMemBlockEmpty ( {
UINTN Index;
-
+
for (Index = 0; Index < Block->BitsLen; Index++) {
if (Block->Bits[Index] != 0) {
return FALSE;
@@ -321,7 +321,7 @@ UsbHcUnlinkMemBlock ( /**
Initialize the memory management pool for the host controller.
-
+
@param Ehc The EHCI device.
@param Check4G Whether the host controller requires allocated memory.
from one 4G address space.
@@ -342,7 +342,7 @@ UsbHcInitMemPool ( UINTN PageNumber;
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS TempPtr;
-
+
PageNumber = sizeof(USBHC_MEM_POOL)/PAGESIZE +1;
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
@@ -353,9 +353,9 @@ UsbHcInitMemPool ( if (EFI_ERROR (Status)) {
return NULL;
}
- ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
+ ZeroMem ((VOID *)(UINTN)TempPtr, PageNumber*EFI_PAGE_SIZE);
- Pool = (USBHC_MEM_POOL *) ((UINTN) TempPtr);
+ Pool = (USBHC_MEM_POOL *) ((UINTN) TempPtr);
Pool->Check4G = Check4G;
Pool->Which4G = Which4G;
@@ -405,7 +405,7 @@ UsbHcFreeMemPool ( /**
Allocate some memory from the host controller's memory pool
which can be used to communicate with host controller.
-
+
@param Ehc The EHCI device.
@param Pool The host controller's memory pool.
@param Size Size of the memory to allocate.
@@ -464,7 +464,7 @@ UsbHcAllocateMem ( if (NewBlock == NULL) {
return NULL;
}
-
+
//
// Add the new memory block to the pool, then allocate memory from it
//
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h index 717a8c8..17e60f6 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h +++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h @@ -1,8 +1,8 @@ /** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -32,22 +32,22 @@ typedef struct _USBHC_MEM_BLOCK USBHC_MEM_BLOCK; struct _USBHC_MEM_BLOCK {
UINT8 *Bits; // Bit array to record which unit is allocated
- UINTN BitsLen;
+ UINTN BitsLen;
UINT8 *Buf;
UINT8 *BufHost;
UINTN BufLen; // Memory size in bytes
- VOID *Mapping;
+ VOID *Mapping;
USBHC_MEM_BLOCK *Next;
};
//
-// USBHC_MEM_POOL is used to manage the memory used by USB
+// USBHC_MEM_POOL is used to manage the memory used by USB
// host controller. EHCI requires the control memory and transfer
-// data to be on the same 4G memory.
+// data to be on the same 4G memory.
//
typedef struct _USBHC_MEM_POOL {
- BOOLEAN Check4G;
- UINT32 Which4G;
+ BOOLEAN Check4G;
+ UINT32 Which4G;
USBHC_MEM_BLOCK *Head;
} USBHC_MEM_POOL;
@@ -71,7 +71,7 @@ typedef struct _USBHC_MEM_POOL { (Byte)++; \
(Bit) = 0; \
} \
- } while (0)
+ } while (0)
/**
diff --git a/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.c b/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.c index 58bef16..f509b74 100644 --- a/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.c +++ b/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.c @@ -5,7 +5,7 @@ ATA controllers in the platform. This PPI can be consumed by PEIM which produce gEfiPeiDeviceRecoveryModulePpiGuid
for Atapi CD ROM device.
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -21,8 +21,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "AtapiPeim.h"
/**
- Initializes the Atapi Block Io PPI.
-
+ Initializes the Atapi Block Io PPI.
+
@param[in] FileHandle Handle of the file being invoked.
@param[in] PeiServices Describes the list of possible PEI Services.
@@ -97,16 +97,16 @@ AtapiPeimEntry ( /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -135,27 +135,27 @@ AtapiGetNumberOfBlockDevices ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
-
- @retval EFI_SUCCESS Media information about the specified block device
+
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
@retval Others Other failure occurs.
@@ -196,7 +196,7 @@ AtapiGetBlockDeviceMediaInfo ( //
// probe media and retrieve latest media information
//
- DEBUG ((EFI_D_INFO, "Atatpi GetInfo DevicePosition is %d\n", AtapiBlkIoDev->DeviceInfo[Index].DevicePosition));
+ DEBUG ((EFI_D_INFO, "Atatpi GetInfo DevicePosition is %d\n", AtapiBlkIoDev->DeviceInfo[Index].DevicePosition));
DEBUG ((EFI_D_INFO, "Atatpi GetInfo DeviceType is %d\n", AtapiBlkIoDev->DeviceInfo[Index].MediaInfo.DeviceType));
DEBUG ((EFI_D_INFO, "Atatpi GetInfo MediaPresent is %d\n", AtapiBlkIoDev->DeviceInfo[Index].MediaInfo.MediaPresent));
DEBUG ((EFI_D_INFO, "Atatpi GetInfo BlockSize is 0x%x\n", AtapiBlkIoDev->DeviceInfo[Index].MediaInfo.BlockSize));
@@ -217,7 +217,7 @@ AtapiGetBlockDeviceMediaInfo ( DEBUG ((EFI_D_INFO, "Atatpi GetInfo MediaPresent is %d\n", AtapiBlkIoDev->DeviceInfo[Index].MediaInfo.MediaPresent));
DEBUG ((EFI_D_INFO, "Atatpi GetInfo BlockSize is 0x%x\n", AtapiBlkIoDev->DeviceInfo[Index].MediaInfo.BlockSize));
DEBUG ((EFI_D_INFO, "Atatpi GetInfo LastBlock is 0x%x\n", AtapiBlkIoDev->DeviceInfo[Index].MediaInfo.LastBlock));
-
+
//
// Get media info from AtapiBlkIoDev
//
@@ -229,31 +229,31 @@ AtapiGetBlockDeviceMediaInfo ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
-
+
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -553,7 +553,7 @@ AtapiEnumerateDevices ( );
//
- // Allow SATA Devices to spin-up. This is needed if
+ // Allow SATA Devices to spin-up. This is needed if
// SEC and PEI phase is too short, for example Release Build.
//
DEBUG ((EFI_D_INFO, "Delay for %d seconds for SATA devices to spin-up\n", PcdGet16 (PcdSataSpinUpDelayInSecForRecoveryPath)));
@@ -571,7 +571,7 @@ AtapiEnumerateDevices ( //
// Using Command and Control Regs Base Address to fill other registers.
//
- for (Index1 = 0; Index1 < IdeEnabledNumber; Index1 ++) {
+ for (Index1 = 0; Index1 < IdeEnabledNumber; Index1 ++) {
CommandBlockBaseAddr = IdeRegsBaseAddr[Index1].CommandBlockBaseAddr;
AtapiBlkIoDev->IdeIoPortReg[Index1].Data = CommandBlockBaseAddr;
AtapiBlkIoDev->IdeIoPortReg[Index1].Reg1.Feature = (UINT16) (CommandBlockBaseAddr + 0x1);
@@ -585,7 +585,7 @@ AtapiEnumerateDevices ( ControlBlockBaseAddr = IdeRegsBaseAddr[Index1].ControlBlockBaseAddr;
AtapiBlkIoDev->IdeIoPortReg[Index1].Alt.DeviceControl = ControlBlockBaseAddr;
AtapiBlkIoDev->IdeIoPortReg[Index1].DriveAddress = (UINT16) (ControlBlockBaseAddr + 0x1);
-
+
//
// Scan IDE bus for ATAPI devices IDE or Sata device
//
@@ -628,7 +628,7 @@ AtapiEnumerateDevices ( /**
Detect Atapi devices.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[out] MediaInfo The media information of the specified block media.
@@ -667,7 +667,7 @@ DiscoverAtapiDevice ( /**
Check power mode of Atapi devices.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in] AtaCommand The Ata Command passed in.
@@ -800,7 +800,7 @@ CheckPowerMode ( /**
Detect if an IDE controller exists in specified position.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@@ -842,7 +842,7 @@ DetectIDEController ( /**
Wait specified time interval to poll for BSY bit clear in the Status Register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -887,7 +887,7 @@ WaitForBSYClear ( /**
Wait specified time interval to poll for DRDY bit set in the Status register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -928,7 +928,7 @@ DRDYReady ( return EFI_ABORTED;
}
}
-
+
MicroSecondDelay (250);
Delay--;
@@ -944,7 +944,7 @@ DRDYReady ( /**
Wait specified time interval to poll for DRQ bit clear in the Status Register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -987,7 +987,7 @@ DRQClear ( return EFI_ABORTED;
}
}
-
+
MicroSecondDelay (250);
Delay--;
@@ -1002,7 +1002,7 @@ DRQClear ( /**
Wait specified time interval to poll for DRQ bit clear in the Alternate Status Register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -1045,7 +1045,7 @@ DRQClear2 ( return EFI_ABORTED;
}
}
-
+
MicroSecondDelay (250);
Delay--;
@@ -1406,7 +1406,7 @@ TestUnitReady ( /**
Send out ATAPI commands conforms to the Packet Command with PIO Data In Protocol.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in] Packet A pointer to ATAPI command packet.
@@ -1702,8 +1702,8 @@ Inquiry ( return EFI_SUCCESS;
}
-/**
- Used before read/write blocks from/to ATAPI device media.
+/**
+ Used before read/write blocks from/to ATAPI device media.
Since ATAPI device media is removable, it is necessary to detect
whether media is present and get current present media's information.
@@ -1739,7 +1739,7 @@ DetectMedia ( if (SenseBuffers == NULL) {
return EFI_OUT_OF_RESOURCES;
}
-
+
//
// Test Unit Ready command is used to detect whether device is accessible,
// the device will produce corresponding Sense data.
@@ -1878,7 +1878,7 @@ DetectMedia ( return EFI_SUCCESS;
}
-/**
+/**
Reset specified Atapi device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@@ -1976,7 +1976,7 @@ ResetDevice ( }
-/**
+/**
Sends out ATAPI Request Sense Packet Command to the specified device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@@ -2072,7 +2072,7 @@ RequestSense ( return EFI_SUCCESS;
}
-/**
+/**
Sends out ATAPI Read Capacity Packet Command to the specified device.
This command will return the information regarding the capacity of the
media in the device.
@@ -2185,7 +2185,7 @@ ReadCapacity ( }
}
-/**
+/**
Perform read from disk in block unit.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@@ -2288,7 +2288,7 @@ ReadSectors ( return Status;
}
-/**
+/**
Check if there is media according to sense data.
@param[in] SenseData Pointer to sense data.
@@ -2324,14 +2324,14 @@ IsNoMedia ( return IsNoMedia;
}
-/**
+/**
Check if device state is unclear according to sense data.
@param[in] SenseData Pointer to sense data.
@param[in] SenseCounts Count of sense data.
@retval TRUE Device state is unclear
- @retval FALSE Device state is clear
+ @retval FALSE Device state is clear
**/
BOOLEAN
@@ -2365,7 +2365,7 @@ IsDeviceStateUnclear ( return Unclear;
}
-/**
+/**
Check if there is media error according to sense data.
@param[in] SenseData Pointer to sense data.
@@ -2438,7 +2438,7 @@ IsMediaError ( return IsError;
}
-/**
+/**
Check if drive is ready according to sense data.
@param[in] SenseData Pointer to sense data.
diff --git a/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.h b/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.h index 20b35c4..2b06a8b 100644 --- a/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.h +++ b/MdeModulePkg/Bus/Pci/IdeBusPei/AtapiPeim.h @@ -1,7 +1,7 @@ /** @file
Private Include file for IdeBus PEIM.
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -140,16 +140,16 @@ typedef struct { /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -167,27 +167,27 @@ AtapiGetNumberOfBlockDevices ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
-
- @retval EFI_SUCCESS Media information about the specified block device
+
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
@retval Others Other failure occurs.
@@ -204,31 +204,31 @@ AtapiGetBlockDeviceMediaInfo ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
-
+
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -374,7 +374,7 @@ AtapiEnumerateDevices ( /**
Detect Atapi devices.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[out] MediaInfo The media information of the specified block media.
@@ -394,7 +394,7 @@ DiscoverAtapiDevice ( /**
Detect if an IDE controller exists in specified position.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@@ -410,7 +410,7 @@ DetectIDEController ( /**
Wait specified time interval to poll for BSY bit clear in the Status Register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -428,7 +428,7 @@ WaitForBSYClear ( /**
Wait specified time interval to poll for DRDY bit set in the Status register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -446,7 +446,7 @@ DRDYReady ( /**
Wait specified time interval to poll for DRQ bit clear in the Status Register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -464,7 +464,7 @@ DRQClear ( /**
Wait specified time interval to poll for DRQ bit clear in the Alternate Status Register.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] IdeIoRegisters A pointer to IDE IO registers.
@param[in] TimeoutInMilliSeconds Time specified in milliseconds.
@@ -569,7 +569,7 @@ TestUnitReady ( /**
Send out ATAPI commands conforms to the Packet Command with PIO Data In Protocol.
-
+
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@param[in] Packet A pointer to ATAPI command packet.
@@ -613,10 +613,10 @@ Inquiry ( OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2
);
-/**
- Used before read/write blocks from/to ATAPI device media.
+/**
+ Used before read/write blocks from/to ATAPI device media.
Since ATAPI device media is removable, it is necessary to detect
- whether media is present and get current present media's information.
+ whether media is present and get current present media's information.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@param[in] DevicePosition An integer to signify device position.
@@ -636,7 +636,7 @@ DetectMedia ( IN OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2
);
-/**
+/**
Reset specified Atapi device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@@ -654,7 +654,7 @@ ResetDevice ( IN BOOLEAN Extensive
);
-/**
+/**
Sends out ATAPI Request Sense Packet Command to the specified device.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@@ -674,7 +674,7 @@ RequestSense ( IN OUT UINT8 *SenseCounts
);
-/**
+/**
Sends out ATAPI Read Capacity Packet Command to the specified device.
This command will return the information regarding the capacity of the
media in the device.
@@ -696,7 +696,7 @@ ReadCapacity ( IN OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo2
);
-/**
+/**
Perform read from disk in block unit.
@param[in] AtapiBlkIoDev A pointer to atapi block IO device.
@@ -720,7 +720,7 @@ ReadSectors ( IN UINTN BlockSize
);
-/**
+/**
Check if there is media according to sense data.
@param[in] SenseData Pointer to sense data.
@@ -736,14 +736,14 @@ IsNoMedia ( IN UINTN SenseCounts
);
-/**
+/**
Check if device state is unclear according to sense data.
@param[in] SenseData Pointer to sense data.
@param[in] SenseCounts Count of sense data.
@retval TRUE Device state is unclear
- @retval FALSE Device state is clear
+ @retval FALSE Device state is clear
**/
BOOLEAN
@@ -752,7 +752,7 @@ IsDeviceStateUnclear ( IN UINTN SenseCounts
);
-/**
+/**
Check if there is media error according to sense data.
@param[in] SenseData Pointer to sense data.
@@ -768,7 +768,7 @@ IsMediaError ( IN UINTN SenseCounts
);
-/**
+/**
Check if drive is ready according to sense data.
@param[in] SenseData Pointer to sense data.
diff --git a/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPei.uni b/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPei.uni index 60d235c..15d50c1 100644 --- a/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPei.uni +++ b/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPei.uni @@ -3,17 +3,17 @@ //
// This PPI can be consumed by PEIM which produce gEfiPeiDeviceRecoveryModulePpiGuid
// for Atapi CD ROM device.
-//
+//
// This module discovers CDROM devices in Legacy and native mode and installs block IO ppis for them.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPeiExtra.uni b/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPeiExtra.uni index 59ce6b1..1024342 100644 --- a/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPeiExtra.uni +++ b/MdeModulePkg/Bus/Pci/IdeBusPei/IdeBusPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// IdeBusPei Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
@@ -14,8 +14,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"IDE Bus PEI Module for Recovery"
diff --git a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.c b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.c index da8daba..6764a85 100644 --- a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.c +++ b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.c @@ -1,7 +1,7 @@ /** @file
This module is one template module for Incompatible PCI Device Support protocol.
It includes one incompatible pci devices list template.
-
+
Incompatible PCI Device Support protocol allows the PCI bus driver to support
resource allocation for some PCI devices that do not comply with the PCI Specification.
@@ -68,7 +68,7 @@ typedef struct { the configuration requirement.
@retval EFI_SUCCESS Successfully got ACPI resource for specified PCI device.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
@retval EFI_OUT_OF_RESOURCES No memory available.
@retval EFI_UNSUPPORTED The specified PCI device wasn't supported.
@@ -233,7 +233,7 @@ IncompatiblePciDeviceSupportEntryPoint ( the configuration requirement.
@retval EFI_SUCCESS Successfully got ACPI resource for specified PCI device.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
@retval EFI_OUT_OF_RESOURCES No memory available.
@retval EFI_UNSUPPORTED The specified PCI device wasn't supported.
diff --git a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportDxe.inf b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportDxe.inf index a83edae..fa3e012 100644 --- a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportDxe.inf +++ b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportDxe.inf @@ -1,10 +1,10 @@ ## @file
# PCI Incompatible device support module template.
#
-# Installs EFI PCI Incompatible Device Support protocol and includes one incompatile
+# Installs EFI PCI Incompatible Device Support protocol and includes one incompatile
# pci devices list template.
#
-# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
diff --git a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportExtra.uni b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportExtra.uni index 2600140..1306b5f 100644 --- a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportExtra.uni +++ b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportExtra.uni @@ -1,7 +1,7 @@ // /** @file
// IncompatiblePciDeviceSupport Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"Incompatible PCI Device Support DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf index 4918696..bfb7832 100644 --- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf +++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf @@ -4,7 +4,7 @@ # NvmExpressDxe driver is used to manage non-volatile memory subsystem which follows
# NVM Express specification.
#
-# Copyright (c) 2013 - 2017, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -78,4 +78,4 @@ #
[UserExtensions.TianoCore."ExtraFiles"]
- NvmExpressDxeExtra.uni
\ No newline at end of file + NvmExpressDxeExtra.uni
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxeExtra.uni b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxeExtra.uni index 2f0ef94..5b7fa329 100644 --- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// NvmExpressDxe Localized Strings and Content
//
-// Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"NVM Express DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.c b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.c index ea48e78..30ade3a 100644 --- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.c +++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.c @@ -2,7 +2,7 @@ NvmExpressDxe driver is used to manage non-volatile memory subsystem which follows
NVM Express specification.
- Copyright (c) 2013 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -1003,7 +1003,7 @@ NvmeControllerInit ( //
if (Private->ControllerData == NULL) {
Private->ControllerData = (NVME_ADMIN_CONTROLLER_DATA *)AllocateZeroPool (sizeof(NVME_ADMIN_CONTROLLER_DATA));
-
+
if (Private->ControllerData == NULL) {
return EFI_OUT_OF_RESOURCES;
}
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c index cfad158..2468871 100644 --- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c +++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c @@ -781,7 +781,7 @@ NvmExpressPassThru ( // Copy the Respose Queue entry for this command to the callers response buffer
//
CopyMem(Packet->NvmeCompletion, Cq, sizeof(EFI_NVM_EXPRESS_COMPLETION));
-
+
//
// Dump every completion entry status for debugging.
//
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c index a1654c0..9ae45cc 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c @@ -140,7 +140,7 @@ PciBusDriverBindingSupported ( //
if (RemainingDevicePath != NULL) {
//
- // Check if RemainingDevicePath is the End of Device Path Node,
+ // Check if RemainingDevicePath is the End of Device Path Node,
// if yes, go on checking other conditions
//
if (!IsDevicePathEnd (RemainingDevicePath)) {
@@ -254,7 +254,7 @@ PciBusDriverBindingStart ( //
if (RemainingDevicePath != NULL) {
//
- // Check if RemainingDevicePath is the End of Device Path Node,
+ // Check if RemainingDevicePath is the End of Device Path Node,
// if yes, return EFI_SUCCESS
//
if (IsDevicePathEnd (RemainingDevicePath)) {
@@ -282,14 +282,14 @@ PciBusDriverBindingStart ( //
// If PCI Platform protocol doesn't exist, try to Pci Override Protocol.
//
- if (gPciPlatformProtocol == NULL) {
+ if (gPciPlatformProtocol == NULL) {
gPciOverrideProtocol = NULL;
gBS->LocateProtocol (
&gEfiPciOverrideProtocolGuid,
NULL,
(VOID **) &gPciOverrideProtocol
);
- }
+ }
if (mIoMmuProtocol == NULL) {
gBS->LocateProtocol (
@@ -315,7 +315,7 @@ PciBusDriverBindingStart ( This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
+ );
ASSERT_EFI_ERROR (Status);
//
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf index 97608bf..a21dd2b 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf @@ -2,7 +2,7 @@ # The PCI bus driver will probe all PCI devices and allocate MMIO and IO space for these devices.
# Please use PCD feature flag PcdPciBusHotplugDeviceSupport to enable hot plug supporting.
#
-# Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -90,8 +90,8 @@ gEfiPciHotPlugInitProtocolGuid ## SOMETIMES_CONSUMES
gEfiPciHostBridgeResourceAllocationProtocolGuid ## TO_START
gEfiPciPlatformProtocolGuid ## SOMETIMES_CONSUMES
- gEfiPciOverrideProtocolGuid ## SOMETIMES_CONSUMES
- gEfiPciEnumerationCompleteProtocolGuid ## PRODUCES
+ gEfiPciOverrideProtocolGuid ## SOMETIMES_CONSUMES
+ gEfiPciEnumerationCompleteProtocolGuid ## PRODUCES
gEfiPciRootBridgeIoProtocolGuid ## TO_START
gEfiIncompatiblePciDeviceSupportProtocolGuid ## SOMETIMES_CONSUMES
gEfiLoadFile2ProtocolGuid ## SOMETIMES_PRODUCES
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxeExtra.uni b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxeExtra.uni index 8f318d8..f562ae8 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// PciBusDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -12,8 +12,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"PCI Bus DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c index f69fe93..ad7a233 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c @@ -236,7 +236,7 @@ RegisterPciDevice ( PciIo = &(PciIoDevice->PciIo);
Data8 = PCI_INT_LINE_UNKNOWN;
PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x3C, 1, &Data8);
-
+
//
// Process OpRom
//
@@ -296,7 +296,7 @@ RegisterPciDevice ( PciIoDevice->PciIo.RomImage,
PciIoDevice->PciIo.RomSize
);
- }
+ }
}
}
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c index d5d3c07..f44db01 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c @@ -187,7 +187,7 @@ PciRootBridgeEnumerator ( AddrRangeMin = Configuration1->AddrRangeMin;
Configuration1->AddrRangeMin = Configuration2->AddrRangeMin;
Configuration2->AddrRangeMin = AddrRangeMin;
-
+
AddrLen = Configuration1->AddrLen;
Configuration1->AddrLen = Configuration2->AddrLen;
Configuration2->AddrLen = AddrLen;
@@ -234,7 +234,7 @@ PciRootBridgeEnumerator ( Status = PciAllocateBusNumber (RootBridgeDev, SubBusNumber, PaddedBusRange, &SubBusNumber);
if (EFI_ERROR (Status)) {
return Status;
- }
+ }
//
// Find the bus range which contains the higest bus number, then returns the number of buses
@@ -252,7 +252,7 @@ PciRootBridgeEnumerator ( Configuration++;
Desc = Configuration->Desc;
Configuration->Desc = ACPI_END_TAG_DESCRIPTOR;
-
+
//
// Set bus number
//
@@ -267,7 +267,7 @@ PciRootBridgeEnumerator ( //
Configuration->Desc = Desc;
(Configuration - 1)->AddrLen = AddrLen;
-
+
return Status;
}
@@ -1812,7 +1812,7 @@ NotifyPhase ( Phase,
ChipsetEntry
);
- }
+ }
Status = PciResAlloc->NotifyPhase (
PciResAlloc,
@@ -2043,7 +2043,7 @@ PciHotPlugRequestNotify ( return EFI_INVALID_PARAMETER;
}
}
-
+
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c index 6f3d1be..cfd291e 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c @@ -1736,7 +1736,7 @@ PciIovParseVfBar ( break;
}
}
-
+
//
// Check the length again so as to keep compatible with some special bars
//
@@ -1745,7 +1745,7 @@ PciIovParseVfBar ( PciIoDevice->VfPciBar[BarIndex].BaseAddress = 0;
PciIoDevice->VfPciBar[BarIndex].Alignment = 0;
}
-
+
//
// Increment number of bar
//
@@ -2185,7 +2185,7 @@ CreatePciIoDevice ( //
ParentPciIo = &Bridge->PciIo;
ParentPciIo->Pci.Read (
- ParentPciIo,
+ ParentPciIo,
EfiPciIoWidthUint32,
Bridge->PciExpressCapabilityOffset + EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_OFFSET,
1,
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c index 62179eb..87b0b98 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c @@ -1,7 +1,7 @@ /** @file
EFI PCI IO protocol functions implementation for PCI Bus module.
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -232,7 +232,7 @@ PciIoPollMem ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Status = PciIoMemRead (This, Width, BarIndex, Offset, 1, Result);
@@ -262,7 +262,7 @@ PciIoPollMem ( } while (TRUE);
}
}
-
+
Status = PciIoDevice->PciRootBridgeIo->PollMem (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
@@ -335,7 +335,7 @@ PciIoPollIo ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Status = PciIoIoRead (This, Width, BarIndex, Offset, 1, Result);
@@ -365,7 +365,7 @@ PciIoPollIo ( } while (TRUE);
}
}
-
+
Status = PciIoDevice->PciRootBridgeIo->PollIo (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
@@ -438,14 +438,14 @@ PciIoMemRead ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
- }
-
+ }
+
Status = PciIoDevice->PciRootBridgeIo->Mem.Read (
PciIoDevice->PciRootBridgeIo,
@@ -517,7 +517,7 @@ PciIoMemWrite ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
@@ -595,13 +595,13 @@ PciIoIoRead ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
- }
+ }
Status = PciIoDevice->PciRootBridgeIo->Io.Read (
PciIoDevice->PciRootBridgeIo,
@@ -673,13 +673,13 @@ PciIoIoWrite ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
- }
+ }
Status = PciIoDevice->PciRootBridgeIo->Io.Write (
PciIoDevice->PciRootBridgeIo,
@@ -739,16 +739,16 @@ PciIoConfigRead ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
//
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
- }
+ }
Status = PciIoDevice->PciRootBridgeIo->Pci.Read (
PciIoDevice->PciRootBridgeIo,
@@ -811,14 +811,14 @@ PciIoConfigWrite ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((Offset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
- }
-
+ }
+
Status = PciIoDevice->PciRootBridgeIo->Pci.Write (
PciIoDevice->PciRootBridgeIo,
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
@@ -910,13 +910,13 @@ PciIoCopyMem ( //
// If request is not aligned, then convert request to EfiPciIoWithXXXUint8
- //
+ //
if (FeaturePcdGet (PcdUnalignedPciIoEnable)) {
if ((SrcOffset & ((1 << (Width & 0x03)) - 1)) != 0 || (DestOffset & ((1 << (Width & 0x03)) - 1)) != 0) {
Count *= (UINTN)(1 << (Width & 0x03));
Width = (EFI_PCI_IO_PROTOCOL_WIDTH) (Width & (~0x03));
}
- }
+ }
Status = PciIoDevice->PciRootBridgeIo->CopyMem (
PciIoDevice->PciRootBridgeIo,
@@ -1790,7 +1790,7 @@ PciIoAttributes ( @param AddrRangeMin The base address of the MMIO.
@param AddrLen The length of the MMIO.
- @retval The AddrTranslationOffset from RootBridgeIo for the
+ @retval The AddrTranslationOffset from RootBridgeIo for the
specified range, or (UINT64) -1 if the range is not
found in RootBridgeIo.
**/
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciLib.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciLib.c index 126a2f7..b81f81a 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciLib.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciLib.c @@ -269,11 +269,11 @@ DumpBridgeResource ( /**
Find the corresponding resource node for the Device in child list of BridgeResource.
-
+
@param[in] Device Pointer to PCI_IO_DEVICE.
@param[in] BridgeResource Pointer to PCI_RESOURCE_NODE.
@param[out] DeviceResources Pointer to a buffer to receive resources for the Device.
-
+
@return Count of the resource descriptors returned.
**/
UINTN
@@ -306,7 +306,7 @@ FindResourceNode ( /**
Dump the resource map of all the devices under Bridge.
-
+
@param[in] Bridge Bridge device instance.
@param[in] Resources Resource descriptors for the bridge device.
@param[in] ResourceCount Count of resource descriptors.
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciOptionRomSupport.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciOptionRomSupport.c index d390bb6..c2be85a 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciOptionRomSupport.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciOptionRomSupport.c @@ -1,7 +1,7 @@ /** @file
PCI Rom supporting funtions implementation for PCI Bus module.
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -342,7 +342,7 @@ ContainEfiImage ( }
//
- // The PCI Data Structure must be DWORD aligned.
+ // The PCI Data Structure must be DWORD aligned.
//
if (RomHeader->PcirOffset == 0 ||
(RomHeader->PcirOffset & 3) != 0 ||
@@ -471,8 +471,8 @@ LoadOpRomImage ( FirstCheck = FALSE;
OffsetPcir = RomHeader->PcirOffset;
//
- // If the pointer to the PCI Data Structure is invalid, no further images can be located.
- // The PCI Data Structure must be DWORD aligned.
+ // If the pointer to the PCI Data Structure is invalid, no further images can be located.
+ // The PCI Data Structure must be DWORD aligned.
//
if (OffsetPcir == 0 ||
(OffsetPcir & 3) != 0 ||
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c index 2f713fc..f3e51d6 100644 --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c @@ -1,7 +1,7 @@ /** @file
PCI resouces support functions implemntation for PCI Bus module.
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -1116,7 +1116,7 @@ DegradeResource ( PMem64Node,
TRUE
);
- }
+ }
//
// if both PMEM64 and PMEM32 requests from child devices, which can not be satisfied
diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c index 83f553a..f8a1239 100644 --- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c @@ -537,7 +537,7 @@ GetElapsedTick ( )
{
UINT64 PreviousTick;
-
+
PreviousTick = *CurrentTick;
*CurrentTick = GetPerformanceCounter();
if (StartTick < EndTick) {
diff --git a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.uni b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.uni index abf85ec..3b43b95 100644 --- a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.uni +++ b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.uni @@ -3,13 +3,13 @@ //
// Produces the Serial I/O protocol for standard UARTS using Super I/O or PCI I/O.
//
-// Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxeExtra.uni b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxeExtra.uni index d6146f0..bd57f1d 100644 --- a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// PciSioSerialDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,6 +13,6 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"PCI SIO UART Serial Bus DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c index a9dc827..5fd9b36 100644 --- a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c +++ b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c @@ -1,7 +1,7 @@ /** @file
Serial driver for PCI or SIO UARTS.
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -94,7 +94,7 @@ SERIAL_DEV gSerialDevTemplate = { Check the device path node whether it's the Flow Control node or not.
@param[in] FlowControl The device path node to be checked.
-
+
@retval TRUE It's the Flow Control node.
@retval FALSE It's not.
@@ -114,9 +114,9 @@ IsUartFlowControlDevicePathNode ( /**
The user Entry Point for module PciSioSerial. The user code starts with this function.
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
-
+
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
@@ -396,7 +396,7 @@ SerialControllerDriverSupported ( if (EFI_ERROR (Status)) {
Status = IsPciSerialController (Controller);
}
- return Status;
+ return Status;
}
/**
diff --git a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.h b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.h index 3c7eb91..0d931a3 100644 --- a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.h +++ b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.h @@ -1,7 +1,7 @@ /** @file
Header file for PciSioSerial Driver
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -497,7 +497,7 @@ SerialFifoFull ( /**
Detect whether specific FIFO is empty or not.
-
+
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@return whether specific FIFO is empty or not
@@ -777,7 +777,7 @@ SkipControllerDevicePathNode ( Check the device path node whether it's the Flow Control node or not.
@param[in] FlowControl The device path node to be checked.
-
+
@retval TRUE It's the Flow Control node.
@retval FALSE It's not.
diff --git a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/SerialIo.c b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/SerialIo.c index c0682e9..31d5ab4 100644 --- a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/SerialIo.c +++ b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/SerialIo.c @@ -1,7 +1,7 @@ /** @file
SerialIo implementation for PCI or SIO UARTs.
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -92,7 +92,7 @@ VerifyUartParameters ( ((DataBits >= 6) && (DataBits <= 8) && (StopBits == OneFiveStopBits))
) {
return FALSE;
- }
+ }
//
// Do not verify the baud rate if clock rate is unknown (0).
@@ -169,8 +169,8 @@ VerifyUartParameters ( }
//
- // ActualBaudRate is higher than requested baud rate and more than 4%
- // higher than the requested value. Increment Divisor if it is less
+ // ActualBaudRate is higher than requested baud rate and more than 4%
+ // higher than the requested value. Increment Divisor if it is less
// than MAX_UINT16 and computed baud rate with new divisor.
//
if (ComputedDivisor == MAX_UINT16) {
@@ -212,7 +212,7 @@ SerialFifoFull ( /**
Detect whether specific FIFO is empty or not.
-
+
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@return whether specific FIFO is empty or not
@@ -363,7 +363,7 @@ SerialReceiveTransmit ( Data = READ_RBR (SerialDevice);
SerialFifoAdd (&SerialDevice->Receive, Data);
-
+
//
// For full handshake flow control, if receive buffer full
// tell the peer to stop sending data.
@@ -1065,7 +1065,7 @@ SerialWrite ( NULL
)
);
-
+
for (Index = 0; Index < *BufferSize; Index++) {
SerialFifoAdd (&SerialDevice->Transmit, CharBuffer[Index]);
diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/ComponentName.c b/MdeModulePkg/Bus/Pci/SataControllerDxe/ComponentName.c index 467ad11..cb18aae 100644 --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/ComponentName.c +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/ComponentName.c @@ -1,7 +1,7 @@ /** @file
UEFI Component Name(2) protocol implementation for Sata Controller driver.
- Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -72,7 +72,7 @@ GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSataControllerController @param DriverName A pointer to the Unicode string to return. This Unicode string
is the name of the driver specified by This in the language
specified by Language.
-
+
@retval EFI_SUCCESS The Unicode string for the Driver specified by This
and the language specified by Language was returned
in DriverName.
@@ -100,7 +100,7 @@ SataControllerComponentNameGetDriverName ( /**
Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by an UEFI Driver.
+ that is being managed by an UEFI Driver.
@param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
@param ControllerHandle The handle of a controller that the driver specified by
@@ -123,7 +123,7 @@ SataControllerComponentNameGetDriverName ( ControllerHandle and ChildHandle in the language
specified by Language from the point of view of the
driver specified by This.
-
+
@retval EFI_SUCCESS The Unicode string for the user readable name in the
language specified by Language for the driver
specified by This was returned in DriverName.
diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c index 87c201d..7dc40f8 100644 --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c @@ -1,7 +1,7 @@ /** @file
This driver module produces IDE_CONTROLLER_INIT protocol for Sata Controllers.
- Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2018, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -46,7 +46,7 @@ AhciReadReg ( UINT32 Data;
ASSERT (PciIo != NULL);
-
+
Data = 0;
PciIo->Mem.Read (
@@ -242,9 +242,9 @@ CalculateBestUdmaMode ( /**
The Entry Point of module. It follows the standard UEFI driver model.
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
-
+
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
@@ -338,7 +338,7 @@ SataControllerSupported ( }
/**
- This routine is called right after the .Supported() called and
+ This routine is called right after the .Supported() called and
Start this driver on ControllerHandle.
@param This Protocol instance pointer.
@@ -558,7 +558,7 @@ Done: @param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param Controller A handle to the device being stopped.
@param NumberOfChildren The number of child device handles in ChildHandleBuffer.
- @param ChildHandleBuffer An array of child handles to be freed.
+ @param ChildHandleBuffer An array of child handles to be freed.
@retval EFI_SUCCESS This driver is removed from this device.
@retval other Some error occurs when removing this driver from this device.
@@ -679,34 +679,34 @@ FlatDeviceIndex ( //
/**
Returns the information about the specified IDE channel.
-
+
This function can be used to obtain information about a particular IDE channel.
- The driver entity uses this information during the enumeration process.
-
- If Enabled is set to FALSE, the driver entity will not scan the channel. Note
+ The driver entity uses this information during the enumeration process.
+
+ If Enabled is set to FALSE, the driver entity will not scan the channel. Note
that it will not prevent an operating system driver from scanning the channel.
-
- For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
- controllers, this value will always be 1. SATA configurations can contain SATA
+
+ For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
+ controllers, this value will always be 1. SATA configurations can contain SATA
port multipliers. SATA port multipliers behave like SATA bridges and can support
- up to 16 devices on the other side. If a SATA port out of the IDE controller
- is connected to a port multiplier, MaxDevices will be set to the number of SATA
- devices that the port multiplier supports. Because today's port multipliers
- support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
- bus driver is required to scan for the presence of port multipliers behind an SATA
- controller and enumerate up to MaxDevices number of devices behind the port
- multiplier.
-
- In this context, the devices behind a port multiplier constitute a channel.
-
+ up to 16 devices on the other side. If a SATA port out of the IDE controller
+ is connected to a port multiplier, MaxDevices will be set to the number of SATA
+ devices that the port multiplier supports. Because today's port multipliers
+ support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
+ bus driver is required to scan for the presence of port multipliers behind an SATA
+ controller and enumerate up to MaxDevices number of devices behind the port
+ multiplier.
+
+ In this context, the devices behind a port multiplier constitute a channel.
+
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel Zero-based channel number.
- @param[out] Enabled TRUE if this channel is enabled. Disabled channels
+ @param[out] Enabled TRUE if this channel is enabled. Disabled channels
are not scanned to see if any devices are present.
@param[out] MaxDevices The maximum number of IDE devices that the bus driver
- can expect on this channel. For the ATA/ATAPI
- specification, version 6, this number will either be
- one or two. For Serial ATA (SATA) configurations with a
+ can expect on this channel. For the ATA/ATAPI
+ specification, version 6, this number will either be
+ one or two. For Serial ATA (SATA) configurations with a
port multiplier, this number can be as large as fifteen.
@retval EFI_SUCCESS Information was returned without any errors.
@@ -739,13 +739,13 @@ IdeInitGetChannelInfo ( /**
The notifications from the driver entity that it is about to enter a certain
phase of the IDE channel enumeration process.
-
- This function can be used to notify the IDE controller driver to perform
- specific actions, including any chipset-specific initialization, so that the
- chipset is ready to enter the next phase. Seven notification points are defined
- at this time.
-
- More synchronization points may be added as required in the future.
+
+ This function can be used to notify the IDE controller driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Seven notification points are defined
+ at this time.
+
+ More synchronization points may be added as required in the future.
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL
instance.
@@ -755,9 +755,9 @@ IdeInitGetChannelInfo ( @retval EFI_SUCCESS The notification was accepted without any errors.
@retval EFI_UNSUPPORTED Phase is not supported.
@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_NOT_READY This phase cannot be entered at this time; for
- example, an attempt was made to enter a Phase
- without having entered one or more previous
+ @retval EFI_NOT_READY This phase cannot be entered at this time; for
+ example, an attempt was made to enter a Phase
+ without having entered one or more previous
Phase.
**/
@@ -775,32 +775,32 @@ IdeInitNotifyPhase ( /**
Submits the device information to the IDE controller driver.
- This function is used by the driver entity to pass detailed information about
- a particular device to the IDE controller driver. The driver entity obtains
+ This function is used by the driver entity to pass detailed information about
+ a particular device to the IDE controller driver. The driver entity obtains
this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData
- is the pointer to the response data buffer. The IdentifyData buffer is owned
- by the driver entity, and the IDE controller driver must make a local copy
- of the entire buffer or parts of the buffer as needed. The original IdentifyData
+ is the pointer to the response data buffer. The IdentifyData buffer is owned
+ by the driver entity, and the IDE controller driver must make a local copy
+ of the entire buffer or parts of the buffer as needed. The original IdentifyData
buffer pointer may not be valid when
-
+
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.
-
- The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
- compute the optimum mode for the device. These fields are not limited to the
- timing information. For example, an implementation of the IDE controller driver
- may examine the vendor and type/mode field to match known bad drives.
-
- The driver entity may submit drive information in any order, as long as it
- submits information for all the devices belonging to the enumeration group
+
+ The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
+ compute the optimum mode for the device. These fields are not limited to the
+ timing information. For example, an implementation of the IDE controller driver
+ may examine the vendor and type/mode field to match known bad drives.
+
+ The driver entity may submit drive information in any order, as long as it
+ submits information for all the devices belonging to the enumeration group
before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device
in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- should be called with IdentifyData set to NULL. The IDE controller driver may
- not have any other mechanism to know whether a device is present or not. Therefore,
- setting IdentifyData to NULL does not constitute an error condition.
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
- given (Channel, Device) pair.
-
+ should be called with IdentifyData set to NULL. The IDE controller driver may
+ not have any other mechanism to know whether a device is present or not. Therefore,
+ setting IdentifyData to NULL does not constitute an error condition.
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
+ given (Channel, Device) pair.
+
@param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel Zero-based channel number.
@param[in] Device Zero-based device number on the Channel.
@@ -853,31 +853,31 @@ IdeInitSubmitData ( /**
Disqualifies specific modes for an IDE device.
- This function allows the driver entity or other drivers (such as platform
+ This function allows the driver entity or other drivers (such as platform
drivers) to reject certain timing modes and request the IDE controller driver
- to recalculate modes. This function allows the driver entity and the IDE
- controller driver to negotiate the timings on a per-device basis. This function
- is useful in the case of drives that lie about their capabilities. An example
- is when the IDE device fails to accept the timing modes that are calculated
+ to recalculate modes. This function allows the driver entity and the IDE
+ controller driver to negotiate the timings on a per-device basis. This function
+ is useful in the case of drives that lie about their capabilities. An example
+ is when the IDE device fails to accept the timing modes that are calculated
by the IDE controller driver based on the response to the Identify Drive command.
- If the driver entity does not want to limit the ATA timing modes and leave that
- decision to the IDE controller driver, it can either not call this function for
- the given device or call this function and set the Valid flag to FALSE for all
+ If the driver entity does not want to limit the ATA timing modes and leave that
+ decision to the IDE controller driver, it can either not call this function for
+ the given device or call this function and set the Valid flag to FALSE for all
modes that are listed in EFI_ATA_COLLECTIVE_MODE.
-
- The driver entity may disqualify modes for a device in any order and any number
+
+ The driver entity may disqualify modes for a device in any order and any number
of times.
-
- This function can be called multiple times to invalidate multiple modes of the
- same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
- specification for more information on PIO modes.
-
+
+ This function can be called multiple times to invalidate multiple modes of the
+ same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
+ specification for more information on PIO modes.
+
For Serial ATA (SATA) controllers, this member function can be used to disqualify
a higher transfer rate mode on a given channel. For example, a platform driver
- may inform the IDE controller driver to not use second-generation (Gen2) speeds
+ may inform the IDE controller driver to not use second-generation (Gen2) speeds
for a certain SATA drive.
-
+
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel The zero-based channel number.
@param[in] Device The zero-based device number on the Channel.
@@ -888,7 +888,7 @@ IdeInitSubmitData ( @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
@retval EFI_INVALID_PARAMETER Device is invalid.
@retval EFI_INVALID_PARAMETER IdentifyData is NULL.
-
+
**/
EFI_STATUS
EFIAPI
@@ -928,39 +928,39 @@ IdeInitDisqualifyMode ( Returns the information about the optimum modes for the specified IDE device.
This function is used by the driver entity to obtain the optimum ATA modes for
- a specific device. The IDE controller driver takes into account the following
+ a specific device. The IDE controller driver takes into account the following
while calculating the mode:
- The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()
- The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- for all the devices that belong to an enumeration group before calling
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
-
- The IDE controller driver will use controller- and possibly platform-specific
- algorithms to arrive at SupportedModes. The IDE controller may base its
- decision on user preferences and other considerations as well. This function
- may be called multiple times because the driver entity may renegotiate the mode
+ The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ for all the devices that belong to an enumeration group before calling
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
+
+ The IDE controller driver will use controller- and possibly platform-specific
+ algorithms to arrive at SupportedModes. The IDE controller may base its
+ decision on user preferences and other considerations as well. This function
+ may be called multiple times because the driver entity may renegotiate the mode
with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().
-
- The driver entity may collect timing information for various devices in any
+
+ The driver entity may collect timing information for various devices in any
order. The driver entity is responsible for making sure that all the dependencies
- are satisfied. For example, the SupportedModes information for device A that
- was previously returned may become stale after a call to
+ are satisfied. For example, the SupportedModes information for device A that
+ was previously returned may become stale after a call to
EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.
-
- The buffer SupportedModes is allocated by the callee because the caller does
- not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
- is defined in a way that allows for future extensibility and can be of variable
- length. This memory pool should be deallocated by the caller when it is no
- longer necessary.
-
- The IDE controller driver for a Serial ATA (SATA) controller can use this
- member function to force a lower speed (first-generation [Gen1] speeds on a
- second-generation [Gen2]-capable hardware). The IDE controller driver can
- also allow the driver entity to stay with the speed that has been negotiated
+
+ The buffer SupportedModes is allocated by the callee because the caller does
+ not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
+ is defined in a way that allows for future extensibility and can be of variable
+ length. This memory pool should be deallocated by the caller when it is no
+ longer necessary.
+
+ The IDE controller driver for a Serial ATA (SATA) controller can use this
+ member function to force a lower speed (first-generation [Gen1] speeds on a
+ second-generation [Gen2]-capable hardware). The IDE controller driver can
+ also allow the driver entity to stay with the speed that has been negotiated
by the physical layer.
-
+
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel A zero-based channel number.
@param[in] Device A zero-based device number on the Channel.
@@ -968,13 +968,13 @@ IdeInitDisqualifyMode ( @retval EFI_SUCCESS SupportedModes was returned.
@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_INVALID_PARAMETER Device is invalid.
@retval EFI_INVALID_PARAMETER SupportedModes is NULL.
- @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
- data. This error may happen if
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
- were not called for at least one drive in the
+ @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
+ data. This error may happen if
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
+ were not called for at least one drive in the
same enumeration group.
**/
@@ -1061,9 +1061,9 @@ IdeInitCalculateMode ( Commands the IDE controller driver to program the IDE controller hardware
so that the specified device can operate at the specified mode.
- This function is used by the driver entity to instruct the IDE controller
- driver to program the IDE controller hardware to the specified modes. This
- function can be called only once for a particular device. For a Serial ATA
+ This function is used by the driver entity to instruct the IDE controller
+ driver to program the IDE controller hardware to the specified modes. This
+ function can be called only once for a particular device. For a Serial ATA
(SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
specific programming may be required.
diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.h b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.h index db2e219..436eff2 100644 --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.h +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.h @@ -1,7 +1,7 @@ /** @file
Header file for Sata Controller driver.
- Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2018, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -146,7 +146,7 @@ SataControllerSupported ( );
/**
- This routine is called right after the .Supported() called and
+ This routine is called right after the .Supported() called and
Start this driver on ControllerHandle.
@param This Protocol instance pointer.
@@ -173,7 +173,7 @@ SataControllerStart ( @param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param Controller A handle to the device being stopped.
@param NumberOfChildren The number of child device handles in ChildHandleBuffer.
- @param ChildHandleBuffer An array of child handles to be freed.
+ @param ChildHandleBuffer An array of child handles to be freed.
@retval EFI_SUCCESS This driver is removed from this device.
@retval other Some error occurs when removing this driver from this device.
@@ -193,34 +193,34 @@ SataControllerStop ( //
/**
Returns the information about the specified IDE channel.
-
+
This function can be used to obtain information about a particular IDE channel.
- The driver entity uses this information during the enumeration process.
-
- If Enabled is set to FALSE, the driver entity will not scan the channel. Note
+ The driver entity uses this information during the enumeration process.
+
+ If Enabled is set to FALSE, the driver entity will not scan the channel. Note
that it will not prevent an operating system driver from scanning the channel.
-
- For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
- controllers, this value will always be 1. SATA configurations can contain SATA
+
+ For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
+ controllers, this value will always be 1. SATA configurations can contain SATA
port multipliers. SATA port multipliers behave like SATA bridges and can support
- up to 16 devices on the other side. If a SATA port out of the IDE controller
- is connected to a port multiplier, MaxDevices will be set to the number of SATA
- devices that the port multiplier supports. Because today's port multipliers
- support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
- bus driver is required to scan for the presence of port multipliers behind an SATA
- controller and enumerate up to MaxDevices number of devices behind the port
- multiplier.
-
- In this context, the devices behind a port multiplier constitute a channel.
-
+ up to 16 devices on the other side. If a SATA port out of the IDE controller
+ is connected to a port multiplier, MaxDevices will be set to the number of SATA
+ devices that the port multiplier supports. Because today's port multipliers
+ support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
+ bus driver is required to scan for the presence of port multipliers behind an SATA
+ controller and enumerate up to MaxDevices number of devices behind the port
+ multiplier.
+
+ In this context, the devices behind a port multiplier constitute a channel.
+
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel Zero-based channel number.
- @param[out] Enabled TRUE if this channel is enabled. Disabled channels
+ @param[out] Enabled TRUE if this channel is enabled. Disabled channels
are not scanned to see if any devices are present.
@param[out] MaxDevices The maximum number of IDE devices that the bus driver
- can expect on this channel. For the ATA/ATAPI
- specification, version 6, this number will either be
- one or two. For Serial ATA (SATA) configurations with a
+ can expect on this channel. For the ATA/ATAPI
+ specification, version 6, this number will either be
+ one or two. For Serial ATA (SATA) configurations with a
port multiplier, this number can be as large as fifteen.
@@ -240,13 +240,13 @@ IdeInitGetChannelInfo ( /**
The notifications from the driver entity that it is about to enter a certain
phase of the IDE channel enumeration process.
-
- This function can be used to notify the IDE controller driver to perform
- specific actions, including any chipset-specific initialization, so that the
- chipset is ready to enter the next phase. Seven notification points are defined
- at this time.
-
- More synchronization points may be added as required in the future.
+
+ This function can be used to notify the IDE controller driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Seven notification points are defined
+ at this time.
+
+ More synchronization points may be added as required in the future.
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL
instance.
@@ -256,9 +256,9 @@ IdeInitGetChannelInfo ( @retval EFI_SUCCESS The notification was accepted without any errors.
@retval EFI_UNSUPPORTED Phase is not supported.
@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_NOT_READY This phase cannot be entered at this time; for
- example, an attempt was made to enter a Phase
- without having entered one or more previous
+ @retval EFI_NOT_READY This phase cannot be entered at this time; for
+ example, an attempt was made to enter a Phase
+ without having entered one or more previous
Phase.
**/
@@ -273,32 +273,32 @@ IdeInitNotifyPhase ( /**
Submits the device information to the IDE controller driver.
- This function is used by the driver entity to pass detailed information about
- a particular device to the IDE controller driver. The driver entity obtains
+ This function is used by the driver entity to pass detailed information about
+ a particular device to the IDE controller driver. The driver entity obtains
this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData
- is the pointer to the response data buffer. The IdentifyData buffer is owned
- by the driver entity, and the IDE controller driver must make a local copy
- of the entire buffer or parts of the buffer as needed. The original IdentifyData
+ is the pointer to the response data buffer. The IdentifyData buffer is owned
+ by the driver entity, and the IDE controller driver must make a local copy
+ of the entire buffer or parts of the buffer as needed. The original IdentifyData
buffer pointer may not be valid when
-
+
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.
-
- The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
- compute the optimum mode for the device. These fields are not limited to the
- timing information. For example, an implementation of the IDE controller driver
- may examine the vendor and type/mode field to match known bad drives.
-
- The driver entity may submit drive information in any order, as long as it
- submits information for all the devices belonging to the enumeration group
+
+ The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
+ compute the optimum mode for the device. These fields are not limited to the
+ timing information. For example, an implementation of the IDE controller driver
+ may examine the vendor and type/mode field to match known bad drives.
+
+ The driver entity may submit drive information in any order, as long as it
+ submits information for all the devices belonging to the enumeration group
before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device
in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- should be called with IdentifyData set to NULL. The IDE controller driver may
- not have any other mechanism to know whether a device is present or not. Therefore,
- setting IdentifyData to NULL does not constitute an error condition.
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
- given (Channel, Device) pair.
-
+ should be called with IdentifyData set to NULL. The IDE controller driver may
+ not have any other mechanism to know whether a device is present or not. Therefore,
+ setting IdentifyData to NULL does not constitute an error condition.
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
+ given (Channel, Device) pair.
+
@param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel Zero-based channel number.
@param[in] Device Zero-based device number on the Channel.
@@ -321,31 +321,31 @@ IdeInitSubmitData ( /**
Disqualifies specific modes for an IDE device.
- This function allows the driver entity or other drivers (such as platform
+ This function allows the driver entity or other drivers (such as platform
drivers) to reject certain timing modes and request the IDE controller driver
- to recalculate modes. This function allows the driver entity and the IDE
- controller driver to negotiate the timings on a per-device basis. This function
- is useful in the case of drives that lie about their capabilities. An example
- is when the IDE device fails to accept the timing modes that are calculated
+ to recalculate modes. This function allows the driver entity and the IDE
+ controller driver to negotiate the timings on a per-device basis. This function
+ is useful in the case of drives that lie about their capabilities. An example
+ is when the IDE device fails to accept the timing modes that are calculated
by the IDE controller driver based on the response to the Identify Drive command.
- If the driver entity does not want to limit the ATA timing modes and leave that
- decision to the IDE controller driver, it can either not call this function for
- the given device or call this function and set the Valid flag to FALSE for all
+ If the driver entity does not want to limit the ATA timing modes and leave that
+ decision to the IDE controller driver, it can either not call this function for
+ the given device or call this function and set the Valid flag to FALSE for all
modes that are listed in EFI_ATA_COLLECTIVE_MODE.
-
- The driver entity may disqualify modes for a device in any order and any number
+
+ The driver entity may disqualify modes for a device in any order and any number
of times.
-
- This function can be called multiple times to invalidate multiple modes of the
- same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
- specification for more information on PIO modes.
-
+
+ This function can be called multiple times to invalidate multiple modes of the
+ same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
+ specification for more information on PIO modes.
+
For Serial ATA (SATA) controllers, this member function can be used to disqualify
a higher transfer rate mode on a given channel. For example, a platform driver
- may inform the IDE controller driver to not use second-generation (Gen2) speeds
+ may inform the IDE controller driver to not use second-generation (Gen2) speeds
for a certain SATA drive.
-
+
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel The zero-based channel number.
@param[in] Device The zero-based device number on the Channel.
@@ -356,7 +356,7 @@ IdeInitSubmitData ( @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
@retval EFI_INVALID_PARAMETER Device is invalid.
@retval EFI_INVALID_PARAMETER IdentifyData is NULL.
-
+
**/
EFI_STATUS
EFIAPI
@@ -371,39 +371,39 @@ IdeInitDisqualifyMode ( Returns the information about the optimum modes for the specified IDE device.
This function is used by the driver entity to obtain the optimum ATA modes for
- a specific device. The IDE controller driver takes into account the following
+ a specific device. The IDE controller driver takes into account the following
while calculating the mode:
- The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()
- The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- for all the devices that belong to an enumeration group before calling
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
-
- The IDE controller driver will use controller- and possibly platform-specific
- algorithms to arrive at SupportedModes. The IDE controller may base its
- decision on user preferences and other considerations as well. This function
- may be called multiple times because the driver entity may renegotiate the mode
+ The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ for all the devices that belong to an enumeration group before calling
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
+
+ The IDE controller driver will use controller- and possibly platform-specific
+ algorithms to arrive at SupportedModes. The IDE controller may base its
+ decision on user preferences and other considerations as well. This function
+ may be called multiple times because the driver entity may renegotiate the mode
with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().
-
- The driver entity may collect timing information for various devices in any
+
+ The driver entity may collect timing information for various devices in any
order. The driver entity is responsible for making sure that all the dependencies
- are satisfied. For example, the SupportedModes information for device A that
- was previously returned may become stale after a call to
+ are satisfied. For example, the SupportedModes information for device A that
+ was previously returned may become stale after a call to
EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.
-
- The buffer SupportedModes is allocated by the callee because the caller does
- not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
- is defined in a way that allows for future extensibility and can be of variable
- length. This memory pool should be deallocated by the caller when it is no
- longer necessary.
-
- The IDE controller driver for a Serial ATA (SATA) controller can use this
- member function to force a lower speed (first-generation [Gen1] speeds on a
- second-generation [Gen2]-capable hardware). The IDE controller driver can
- also allow the driver entity to stay with the speed that has been negotiated
+
+ The buffer SupportedModes is allocated by the callee because the caller does
+ not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
+ is defined in a way that allows for future extensibility and can be of variable
+ length. This memory pool should be deallocated by the caller when it is no
+ longer necessary.
+
+ The IDE controller driver for a Serial ATA (SATA) controller can use this
+ member function to force a lower speed (first-generation [Gen1] speeds on a
+ second-generation [Gen2]-capable hardware). The IDE controller driver can
+ also allow the driver entity to stay with the speed that has been negotiated
by the physical layer.
-
+
@param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
@param[in] Channel A zero-based channel number.
@param[in] Device A zero-based device number on the Channel.
@@ -411,13 +411,13 @@ IdeInitDisqualifyMode ( @retval EFI_SUCCESS SupportedModes was returned.
@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_INVALID_PARAMETER Device is invalid.
@retval EFI_INVALID_PARAMETER SupportedModes is NULL.
- @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
- data. This error may happen if
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
- were not called for at least one drive in the
+ @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
+ data. This error may happen if
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
+ were not called for at least one drive in the
same enumeration group.
**/
@@ -434,9 +434,9 @@ IdeInitCalculateMode ( Commands the IDE controller driver to program the IDE controller hardware
so that the specified device can operate at the specified mode.
- This function is used by the driver entity to instruct the IDE controller
- driver to program the IDE controller hardware to the specified modes. This
- function can be called only once for a particular device. For a Serial ATA
+ This function is used by the driver entity to instruct the IDE controller
+ driver to program the IDE controller hardware to the specified modes. This
+ function can be called only once for a particular device. For a Serial ATA
(SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
specific programming may be required.
diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.inf b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.inf index 03f9fa0..4fcb967 100644 --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.inf +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.inf @@ -1,15 +1,15 @@ ## @file
# SataController driver to manage SATA compliance IDE/AHCI host controllers.
#
-# Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
-#
+#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
+#
##
[Defines]
@@ -26,7 +26,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC ARM AARCH64
#
-# DRIVER_BINDING = gSataControllerDriverBinding
+# DRIVER_BINDING = gSataControllerDriverBinding
# COMPONENT_NAME = gSataControllerComponentName
# COMPONENT_NAME2 = gSataControllerComponentName2
#
diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.uni b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.uni index a956327..c02adbc 100644 --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.uni +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe.uni @@ -3,13 +3,13 @@ //
// It consumes PciIo protocol and produces IdeControllerInit protocol for upper layer use.
//
-// Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
@@ -19,4 +19,4 @@ #string STR_MODULE_ABSTRACT #language en-US "Responsible for managing the standard SATA controller"
#string STR_MODULE_DESCRIPTION #language en-US "Implements the IdeControllerInit protocol interface for upper layer use\n"
-
\ No newline at end of file +
diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxeExtra.uni b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxeExtra.uni index ed25611..b88da0e 100644 --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// SataControllerDxe Localized Strings and Content
//
-// Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"SATA Controller DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.c index 3f4ebc4..29a0261 100644 --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.c +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.c @@ -2,7 +2,7 @@ SdMmcPciHcPei driver is used to provide platform-dependent info, mainly SD/MMC
host controller MMIO base, to upper layer SD/MMC drivers.
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -160,7 +160,7 @@ InitializeSdMmcHcPeim ( //
MmioSize = Size & 0xFFFFFFF0;
PciWrite32 (PCI_LIB_ADDRESS(Bus, Device, Function, PCI_BASE_ADDRESSREG_OFFSET + 4), 0xFFFFFFFF);
- Size = PciRead32 (PCI_LIB_ADDRESS(Bus, Device, Function, PCI_BASE_ADDRESSREG_OFFSET + 4));
+ Size = PciRead32 (PCI_LIB_ADDRESS(Bus, Device, Function, PCI_BASE_ADDRESSREG_OFFSET + 4));
//
// Fix the length to support some spefic 64 bit BAR
//
diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.inf b/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.inf index bc6ea60..51675f5 100644 --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.inf +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcPei/SdMmcPciHcPei.inf @@ -1,7 +1,7 @@ ## @file
# Component Description File For SD/MMC Pci Host Controller Pei Module.
#
-# Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -53,4 +53,4 @@ gEfiPeiMasterBootModePpiGuid AND gEfiPeiMemoryDiscoveredPpiGuid
[UserExtensions.TianoCore."ExtraFiles"]
- SdMmcPciHcPeiExtra.uni
\ No newline at end of file + SdMmcPciHcPeiExtra.uni
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/ComponentName.c b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/ComponentName.c index 1e2db1a..54f6783 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/ComponentName.c +++ b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/ComponentName.c @@ -2,7 +2,7 @@ UfsHcDxe driver produces EFI_UFS_HOST_CONTROLLER_PROTOCOL. The upper layer module
uses it to query the MMIO base address of the UFS host controller.
- Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -38,7 +38,7 @@ GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mUfsHcDriverNameTable[] = "eng;en",
L"Universal Flash Storage (UFS) Pci Host Controller Driver"
},
- {
+ {
NULL,
NULL
}
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.c b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.c index 96cf39a..6539397 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.c +++ b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.c @@ -2,7 +2,7 @@ UfsHcDxe driver is used to provide platform-dependent info, mainly UFS host controller
MMIO base, to upper layer UFS drivers.
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -95,24 +95,24 @@ UfsHcGetMmioBar ( return Status;
}
-/**
+/**
Provides the UFS controller-specific addresses needed to access system memory.
-
+
@param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
@param Operation Indicates if the bus master is going to read or write to system memory.
@param HostAddress The system memory address to map to the UFS controller.
@param NumberOfBytes On input the number of bytes to map. On output the number of bytes
- that were mapped.
+ that were mapped.
@param DeviceAddress The resulting map address for the bus master UFS controller to use to
- access the hosts HostAddress.
+ access the hosts HostAddress.
@param Mapping A resulting value to pass to Unmap().
-
+
@retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
-
+
**/
EFI_STATUS
EFIAPI
@@ -140,15 +140,15 @@ UfsHcMap ( return Status;
}
-/**
+/**
Completes the Map() operation and releases any corresponding resources.
-
- @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
+
+ @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
@param Mapping The mapping value returned from Map().
-
+
@retval EFI_SUCCESS The range was unmapped.
@retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
+
**/
EFI_STATUS
EFIAPI
@@ -172,25 +172,25 @@ UfsHcUnmap ( return Status;
}
-/**
+/**
Allocates pages that are suitable for an EfiUfsHcOperationBusMasterCommonBuffer
- mapping.
-
+ mapping.
+
@param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
@param Type This parameter is not used and must be ignored.
@param MemoryType The type of memory to allocate, EfiBootServicesData or
- EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
+ EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
@param HostAddress A pointer to store the base system memory address of the
- allocated range.
+ allocated range.
@param Attributes The requested bit mask of attributes for the allocated range.
-
+
@retval EFI_SUCCESS The requested memory pages were allocated.
@retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
**/
EFI_STATUS
EFIAPI
@@ -218,17 +218,17 @@ UfsHcAllocateBuffer ( return Status;
}
-/**
+/**
Frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
+
+ @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
@retval EFI_SUCCESS The requested memory pages were freed.
@retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
was not allocated with AllocateBuffer().
-
+
**/
EFI_STATUS
EFIAPI
@@ -253,16 +253,16 @@ UfsHcFreeBuffer ( return Status;
}
-/**
+/**
Flushes all posted write transactions from the UFS bus to attached UFS device.
-
- @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
-
+
+ @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
+
@retval EFI_SUCCESS The posted write transactions were flushed from the UFS bus
- to attached UFS device.
+ to attached UFS device.
@retval EFI_DEVICE_ERROR The posted write transactions were not flushed from the UFS
- bus to attached UFS device due to a hardware error.
-
+ bus to attached UFS device due to a hardware error.
+
**/
EFI_STATUS
EFIAPI
@@ -281,7 +281,7 @@ UfsHcFlush ( return Status;
}
-/**
+/**
Enable a UFS bus driver to access UFS MMIO registers in the UFS Host Controller memory space.
@param This A pointer to the EDKII_UFS_HOST_CONTROLLER_PROTOCOL instance.
@@ -323,7 +323,7 @@ UfsHcMmioRead ( return Status;
}
-/**
+/**
Enable a UFS bus driver to access UFS MMIO registers in the UFS Host Controller memory space.
@param This A pointer to the EDKII_UFS_HOST_CONTROLLER_PROTOCOL instance.
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.h b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.h index d9d977a..a2e61d6 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.h +++ b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.h @@ -2,7 +2,7 @@ UfsHcDxe driver is used to provide platform-dependent info, mainly UFS host controller
MMIO base, to upper layer UFS drivers.
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -55,7 +55,7 @@ struct _UFS_HOST_CONTROLLER_PRIVATE_DATA { UINT32 Signature;
EDKII_UFS_HOST_CONTROLLER_PROTOCOL UfsHc;
- EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_PCI_IO_PROTOCOL *PciIo;
UINT8 BarIndex;
UINT64 PciAttributes;
};
@@ -336,24 +336,24 @@ UfsHcGetMmioBar ( OUT UINTN *MmioBar
);
-/**
+/**
Provides the UFS controller-specific addresses needed to access system memory.
-
+
@param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
@param Operation Indicates if the bus master is going to read or write to system memory.
@param HostAddress The system memory address to map to the UFS controller.
@param NumberOfBytes On input the number of bytes to map. On output the number of bytes
- that were mapped.
+ that were mapped.
@param DeviceAddress The resulting map address for the bus master UFS controller to use to
- access the hosts HostAddress.
+ access the hosts HostAddress.
@param Mapping A resulting value to pass to Unmap().
-
+
@retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
-
+
**/
EFI_STATUS
EFIAPI
@@ -366,15 +366,15 @@ UfsHcMap ( OUT VOID **Mapping
);
-/**
+/**
Completes the Map() operation and releases any corresponding resources.
-
- @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
+
+ @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
@param Mapping The mapping value returned from Map().
-
+
@retval EFI_SUCCESS The range was unmapped.
@retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
+
**/
EFI_STATUS
EFIAPI
@@ -383,25 +383,25 @@ UfsHcUnmap ( IN VOID *Mapping
);
-/**
+/**
Allocates pages that are suitable for an EfiUfsHcOperationBusMasterCommonBuffer
- mapping.
-
+ mapping.
+
@param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
@param Type This parameter is not used and must be ignored.
@param MemoryType The type of memory to allocate, EfiBootServicesData or
- EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
+ EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
@param HostAddress A pointer to store the base system memory address of the
- allocated range.
+ allocated range.
@param Attributes The requested bit mask of attributes for the allocated range.
-
+
@retval EFI_SUCCESS The requested memory pages were allocated.
@retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
**/
EFI_STATUS
EFIAPI
@@ -414,17 +414,17 @@ UfsHcAllocateBuffer ( IN UINT64 Attributes
);
-/**
+/**
Frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
+
+ @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
@retval EFI_SUCCESS The requested memory pages were freed.
@retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
was not allocated with AllocateBuffer().
-
+
**/
EFI_STATUS
EFIAPI
@@ -434,16 +434,16 @@ UfsHcFreeBuffer ( IN VOID *HostAddress
);
-/**
+/**
Flushes all posted write transactions from the UFS bus to attached UFS device.
-
- @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
-
+
+ @param This A pointer to the EFI_UFS_HOST_CONTROLLER_PROTOCOL instance.
+
@retval EFI_SUCCESS The posted write transactions were flushed from the UFS bus
- to attached UFS device.
+ to attached UFS device.
@retval EFI_DEVICE_ERROR The posted write transactions were not flushed from the UFS
- bus to attached UFS device due to a hardware error.
-
+ bus to attached UFS device due to a hardware error.
+
**/
EFI_STATUS
EFIAPI
@@ -451,7 +451,7 @@ UfsHcFlush ( IN EDKII_UFS_HOST_CONTROLLER_PROTOCOL *This
);
-/**
+/**
Enable a UFS bus driver to access UFS MMIO registers in the UFS Host Controller memory space.
@param This A pointer to the EDKII_UFS_HOST_CONTROLLER_PROTOCOL instance.
@@ -479,7 +479,7 @@ UfsHcMmioRead ( IN OUT VOID *Buffer
);
-/**
+/**
Enable a UFS bus driver to access UFS MMIO registers in the UFS Host Controller memory space.
@param This A pointer to the EDKII_UFS_HOST_CONTROLLER_PROTOCOL instance.
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.inf b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.inf index c1ce9ea..5252356 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.inf +++ b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.inf @@ -1,7 +1,7 @@ ## @file
# Component Description File For Universal Flash Storage Pci Host Controller Module.
#
-# Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -53,4 +53,4 @@ gEdkiiUfsHostControllerProtocolGuid ## BY_START
[UserExtensions.TianoCore."ExtraFiles"]
- UfsPciHcDxeExtra.uni
\ No newline at end of file + UfsPciHcDxeExtra.uni
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.uni b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.uni index 009180f..58e06ea 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.uni +++ b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxe.uni @@ -1,13 +1,13 @@ // /** @file
// The UfsPciHcDxe driver is used by upper layer to retrieve mmio base address of managed pci-based Ufs host controller.
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxeExtra.uni b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxeExtra.uni index ff33ff6..35fd876 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/UfsPciHcDxe/UfsPciHcDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UfsPciHcDxe Localized Strings and Content
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"UFS PCI-Based HC Driver"
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.c b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.c index 3632564..56e4051 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.c +++ b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.c @@ -2,7 +2,7 @@ UfsPciHcPei driver is used to provide platform-dependent info, mainly UFS host controller
MMIO base, to upper layer UFS drivers.
- Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -53,7 +53,7 @@ GetUfsHcMmioBar ( if (ControllerId >= Private->TotalUfsHcs) {
return EFI_INVALID_PARAMETER;
}
-
+
*MmioBar = (UINTN)Private->UfsHcPciAddr[ControllerId];
return EFI_SUCCESS;
@@ -61,7 +61,7 @@ GetUfsHcMmioBar ( /**
The user code starts with this function.
-
+
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.inf b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.inf index b169356..3535da1 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.inf +++ b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.inf @@ -1,7 +1,7 @@ ## @file
# Component Description File For Universal Flash Storage Pci Host Controller Pei Module.
#
-# Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -53,4 +53,4 @@ gEfiPeiMasterBootModePpiGuid AND gEfiPeiMemoryDiscoveredPpiGuid
[UserExtensions.TianoCore."ExtraFiles"]
- UfsPciHcPeiExtra.uni
\ No newline at end of file + UfsPciHcPeiExtra.uni
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.uni b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.uni index 59f5d70..f2a2968 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.uni +++ b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPei.uni @@ -2,14 +2,14 @@ // The UfsPciHcPei driver is used by upper layer to retrieve mmio base address of managed
// pci-based Ufs host controller at PEI phase.
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPeiExtra.uni b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPeiExtra.uni index cb579ba..c9b22a5 100644 --- a/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPeiExtra.uni +++ b/MdeModulePkg/Bus/Pci/UfsPciHcPei/UfsPciHcPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UfsPciHcPei Localized Strings and Content
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
@@ -14,8 +14,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"UFS PCI-Based HC Module for Recovery"
diff --git a/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.c b/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.c index 1fcc8b5..246f064 100644 --- a/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.c +++ b/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.c @@ -2,7 +2,7 @@ The UHCI driver model and HC protocol routines.
-Copyright (c) 2004 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -1519,7 +1519,7 @@ UhciFreeDev ( if (Uhc->ExitBootServiceEvent != NULL) {
gBS->CloseEvent (Uhc->ExitBootServiceEvent);
}
-
+
if (Uhc->MemPool != NULL) {
UsbHcFreeMemPool (Uhc->MemPool);
}
@@ -1796,7 +1796,7 @@ UhciDriverBindingStart ( UhciWriteReg (Uhc->PciIo, USBCMD_OFFSET, USBCMD_RS | USBCMD_MAXP);
return EFI_SUCCESS;
-
+
UNINSTALL_USBHC:
gBS->UninstallMultipleProtocolInterfaces (
Controller,
diff --git a/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.h b/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.h index fc23a75..e1218ff 100644 --- a/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.h +++ b/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.h @@ -2,7 +2,7 @@ The definition for UHCI driver model and HC protocol routines.
-Copyright (c) 2004 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -145,7 +145,7 @@ struct _USB_HC_DEV { VOID *FrameMapping;
//
- // ExitBootServicesEvent is used to stop the EHC DMA operation
+ // ExitBootServicesEvent is used to stop the EHC DMA operation
// after exit boot service.
//
EFI_EVENT ExitBootServiceEvent;
diff --git a/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf b/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf index 9c5ff7b..5dccd3b 100644 --- a/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf +++ b/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf @@ -1,9 +1,9 @@ ## @file
-# The UhciDxe driver is responsible for managing the behavior of UHCI controller.
+# The UhciDxe driver is responsible for managing the behavior of UHCI controller.
# It implements the interfaces of monitoring the status of all ports and transferring
# Control, Bulk, Interrupt and Isochronous requests to Usb1.x device
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -23,7 +23,7 @@ FILE_GUID = 2FB92EFA-2EE0-4bae-9EB6-7464125E1EF7
MODULE_TYPE = UEFI_DRIVER
VERSION_STRING = 1.0
-
+
ENTRY_POINT = UhciDriverEntryPoint
#
@@ -31,7 +31,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC ARM AARCH64
#
-# DRIVER_BINDING = gUhciDriverBinding
+# DRIVER_BINDING = gUhciDriverBinding
# COMPONENT_NAME = gUhciComponentName
# COMPONENT_NAME2 = gUhciComponentName2
#
diff --git a/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.uni b/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.uni index bedde45..8737869 100644 --- a/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.uni +++ b/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.uni @@ -4,13 +4,13 @@ // It implements the interfaces of monitoring the status of all ports and transferring
// Control, Bulk, Interrupt and Isochronous requests to Usb1.x device
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxeExtra.uni b/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxeExtra.uni index af25848..cad96da 100644 --- a/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UhciDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"UHCI DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c index 482c404..ec2daf1 100644 --- a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c @@ -2,8 +2,8 @@ PEIM to produce gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved. <BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved. <BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -220,12 +220,12 @@ UhcPeimEntry ( /**
Submits control transfer to a target USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param DeviceAddress The target device address.
@param DeviceSpeed Target device speed.
- @param MaximumPacketLength Maximum packet size the default control transfer
+ @param MaximumPacketLength Maximum packet size the default control transfer
endpoint is capable of sending or receiving.
@param Request USB device request to send.
@param TransferDirection Specifies the data direction for the data stage.
@@ -458,18 +458,18 @@ UhcControlTransfer ( /**
Submits bulk transfer to a bulk endpoint of a USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param DeviceAddress Target device address.
@param EndPointAddress Endpoint number and its direction in bit 7.
- @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
sending or receiving.
- @param Data Array of pointers to the buffers of data to transmit
+ @param Data Array of pointers to the buffers of data to transmit
from or receive into.
@param DataLength The lenght of the data buffer.
@param DataToggle On input, the initial data toggle for the transfer;
- On output, it is updated to to next data toggle to use of
+ On output, it is updated to to next data toggle to use of
the subsequent bulk transfer.
@param TimeOut Indicates the maximum time, in millisecond, which the
transfer is allowed to complete.
@@ -694,10 +694,10 @@ UhcBulkTransfer ( Retrieves the number of root hub ports.
@param[in] PeiServices The pointer to the PEI Services Table.
- @param[in] This The pointer to this instance of the
+ @param[in] This The pointer to this instance of the
PEI_USB_HOST_CONTROLLER_PPI.
- @param[out] PortNumber The pointer to the number of the root hub ports.
-
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
@retval EFI_SUCCESS The port number was retrieved successfully.
@retval EFI_INVALID_PARAMETER PortNumber is NULL.
@@ -739,10 +739,10 @@ UhcGetRootHubPortNumber ( /**
Retrieves the current status of a USB root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
- @param PortNumber The root hub port to retrieve the state from.
+ @param PortNumber The root hub port to retrieve the state from.
@param PortStatus Variable to receive the port state.
@retval EFI_SUCCESS The status of the USB root hub port specified.
@@ -832,7 +832,7 @@ UhcGetRootHubPortStatus ( /**
Sets a feature for the specified root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI
@param PortNumber Root hub port to set.
@@ -908,7 +908,7 @@ UhcSetRootHubPortFeature ( /**
Clears a feature for the specified root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param PortNumber Specifies the root hub port whose feature
@@ -916,7 +916,7 @@ UhcSetRootHubPortFeature ( @param PortFeature Indicates the feature selector associated with the
feature clear request.
- @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
for the USB root hub port specified by PortNumber.
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
@@ -1131,7 +1131,7 @@ CreateFrameList ( ASSERT (UhcDev->BulkQH != NULL);
//
- //Set the corresponding QH pointer
+ //Set the corresponding QH pointer
//
SetQHHorizontalLinkPtr(UhcDev->ConfigQH, UhcDev->BulkQH);
SetQHHorizontalQHorTDSelect (UhcDev->ConfigQH, TRUE);
@@ -1154,7 +1154,7 @@ CreateFrameList ( /**
Read a 16bit width data from Uhc HC IO space register.
-
+
@param UhcDev The UHCI device.
@param Port The IO space address of the register.
@@ -1172,7 +1172,7 @@ USBReadPortW ( /**
Write a 16bit width data into Uhc HC IO space register.
-
+
@param UhcDev The UHCI device.
@param Port The IO space address of the register.
@param Data The data written into the register.
@@ -1190,7 +1190,7 @@ USBWritePortW ( /**
Write a 32bit width data into Uhc HC IO space register.
-
+
@param UhcDev The UHCI device.
@param Port The IO space address of the register.
@param Data The data written into the register.
@@ -1208,7 +1208,7 @@ USBWritePortDW ( /**
Clear the content of UHCI's Status Register.
-
+
@param UhcDev The UHCI device.
@param StatusAddr The IO space address of the register.
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h index 9935f52..33d4f2f 100644 --- a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h @@ -1,8 +1,8 @@ /** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -203,12 +203,12 @@ typedef struct { /**
Submits control transfer to a target USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param DeviceAddress The target device address.
@param DeviceSpeed Target device speed.
- @param MaximumPacketLength Maximum packet size the default control transfer
+ @param MaximumPacketLength Maximum packet size the default control transfer
endpoint is capable of sending or receiving.
@param Request USB device request to send.
@param TransferDirection Specifies the data direction for the data stage.
@@ -242,18 +242,18 @@ UhcControlTransfer ( /**
Submits bulk transfer to a bulk endpoint of a USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param DeviceAddress Target device address.
@param EndPointAddress Endpoint number and its direction in bit 7.
- @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
sending or receiving.
- @param Data Array of pointers to the buffers of data to transmit
+ @param Data Array of pointers to the buffers of data to transmit
from or receive into.
@param DataLength The lenght of the data buffer.
@param DataToggle On input, the initial data toggle for the transfer;
- On output, it is updated to to next data toggle to use of
+ On output, it is updated to to next data toggle to use of
the subsequent bulk transfer.
@param TimeOut Indicates the maximum time, in millisecond, which the
transfer is allowed to complete.
@@ -286,10 +286,10 @@ UhcBulkTransfer ( Retrieves the number of root hub ports.
@param[in] PeiServices The pointer to the PEI Services Table.
- @param[in] This The pointer to this instance of the
+ @param[in] This The pointer to this instance of the
PEI_USB_HOST_CONTROLLER_PPI.
- @param[out] PortNumber The pointer to the number of the root hub ports.
-
+ @param[out] PortNumber The pointer to the number of the root hub ports.
+
@retval EFI_SUCCESS The port number was retrieved successfully.
@retval EFI_INVALID_PARAMETER PortNumber is NULL.
@@ -304,10 +304,10 @@ UhcGetRootHubPortNumber ( /**
Retrieves the current status of a USB root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
- @param PortNumber The root hub port to retrieve the state from.
+ @param PortNumber The root hub port to retrieve the state from.
@param PortStatus Variable to receive the port state.
@retval EFI_SUCCESS The status of the USB root hub port specified.
@@ -326,7 +326,7 @@ UhcGetRootHubPortStatus ( /**
Sets a feature for the specified root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI
@param PortNumber Root hub port to set.
@@ -348,7 +348,7 @@ UhcSetRootHubPortFeature ( /**
Clears a feature for the specified root hub port.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param PortNumber Specifies the root hub port whose feature
@@ -356,7 +356,7 @@ UhcSetRootHubPortFeature ( @param PortFeature Indicates the feature selector associated with the
feature clear request.
- @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
for the USB root hub port specified by PortNumber.
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
@@ -400,7 +400,7 @@ CreateFrameList ( /**
Read a 16bit width data from Uhc HC IO space register.
-
+
@param UhcDev The UHCI device.
@param Port The IO space address of the register.
@@ -415,7 +415,7 @@ USBReadPortW ( /**
Write a 16bit width data into Uhc HC IO space register.
-
+
@param UhcDev The UHCI device.
@param Port The IO space address of the register.
@param Data The data written into the register.
@@ -430,7 +430,7 @@ USBWritePortW ( /**
Write a 32bit width data into Uhc HC IO space register.
-
+
@param UhcDev The UHCI device.
@param Port The IO space address of the register.
@param Data The data written into the register.
@@ -445,7 +445,7 @@ USBWritePortDW ( /**
Clear the content of UHCI's Status Register.
-
+
@param UhcDev The UHCI device.
@param StatusAddr The IO space address of the register.
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni b/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni index ef299e4..fb1ba01 100644 --- a/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.uni @@ -4,14 +4,14 @@ // It produces gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid which is used
// to enable recovery function from USB Drivers.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni b/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni index c000912..e31ce04 100644 --- a/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhciPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UhciPei Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
@@ -14,8 +14,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"UHCI PEI Module for Recovery"
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.c b/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.c index 7c5261c..b5840a9 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.c @@ -2,7 +2,7 @@ Routine procedures for memory allocate/free.
-Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -598,23 +598,23 @@ UsbHcFreeMem ( return ;
}
-/**
+/**
Allocates pages at a specified alignment that are suitable for an EfiPciIoOperationBusMasterCommonBuffer mapping.
-
+
If Alignment is not a power of two and Alignment is not zero, then ASSERT().
@param PciIo The PciIo that can be used to access the host controller.
@param Pages The number of pages to allocate.
@param Alignment The requested alignment of the allocation. Must be a power of two.
@param HostAddress The system memory address to map to the PCI controller.
- @param DeviceAddress The resulting map address for the bus master PCI controller to
+ @param DeviceAddress The resulting map address for the bus master PCI controller to
use to access the hosts HostAddress.
@param Mapping A resulting value to pass to Unmap().
@retval EFI_SUCCESS Success to allocate aligned pages.
@retval EFI_INVALID_PARAMETER Pages or Alignment is not valid.
@retval EFI_OUT_OF_RESOURCES Do not have enough resources to allocate memory.
-
+
**/
EFI_STATUS
@@ -639,11 +639,11 @@ UsbHcAllocateAlignedPages ( // Alignment must be a power of two or zero.
//
ASSERT ((Alignment & (Alignment - 1)) == 0);
-
+
if ((Alignment & (Alignment - 1)) != 0) {
return EFI_INVALID_PARAMETER;
}
-
+
if (Pages == 0) {
return EFI_INVALID_PARAMETER;
}
@@ -657,7 +657,7 @@ UsbHcAllocateAlignedPages ( // Make sure that Pages plus EFI_SIZE_TO_PAGES (Alignment) does not overflow.
//
ASSERT (RealPages > Pages);
-
+
Status = PciIo->AllocateBuffer (
PciIo,
AllocateAnyPages,
@@ -665,7 +665,7 @@ UsbHcAllocateAlignedPages ( Pages,
&Memory,
0
- );
+ );
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
@@ -719,7 +719,7 @@ UsbHcAllocateAlignedPages ( Status = PciIo->FreeBuffer (PciIo, Pages, (VOID *) AlignedMemory);
return EFI_OUT_OF_RESOURCES;
}
-
+
*HostAddress = (VOID *) AlignedMemory;
return EFI_SUCCESS;
@@ -727,7 +727,7 @@ UsbHcAllocateAlignedPages ( /**
Frees memory that was allocated with UsbHcAllocateAlignedPages().
-
+
@param PciIo The PciIo that can be used to access the host controller.
@param HostAddress The system memory address to map to the PCI controller.
@param Pages The number of 4 KB pages to free.
@@ -743,9 +743,9 @@ UsbHcFreeAlignedPages ( )
{
EFI_STATUS Status;
-
+
ASSERT (Pages != 0);
-
+
Status = PciIo->Unmap (PciIo, Mapping);
ASSERT_EFI_ERROR (Status);
@@ -753,6 +753,6 @@ UsbHcFreeAlignedPages ( PciIo,
Pages,
HostAddress
- );
+ );
ASSERT_EFI_ERROR (Status);
}
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.h b/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.h index 1907685..bb5fc5b 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.h +++ b/MdeModulePkg/Bus/Pci/XhciDxe/UsbHcMem.h @@ -2,7 +2,7 @@ This file contains the definination for host controller memory management routines.
-Copyright (c) 2013, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -164,23 +164,23 @@ UsbHcGetHostAddrForPciAddr ( IN UINTN Size
);
-/**
+/**
Allocates pages at a specified alignment that are suitable for an EfiPciIoOperationBusMasterCommonBuffer mapping.
-
+
If Alignment is not a power of two and Alignment is not zero, then ASSERT().
@param PciIo The PciIo that can be used to access the host controller.
@param Pages The number of pages to allocate.
@param Alignment The requested alignment of the allocation. Must be a power of two.
@param HostAddress The system memory address to map to the PCI controller.
- @param DeviceAddress The resulting map address for the bus master PCI controller to
+ @param DeviceAddress The resulting map address for the bus master PCI controller to
use to access the hosts HostAddress.
@param Mapping A resulting value to pass to Unmap().
@retval EFI_SUCCESS Success to allocate aligned pages.
@retval EFI_INVALID_PARAMETER Pages or Alignment is not valid.
@retval EFI_OUT_OF_RESOURCES Do not have enough resources to allocate memory.
-
+
**/
EFI_STATUS
@@ -192,10 +192,10 @@ UsbHcAllocateAlignedPages ( OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
OUT VOID **Mapping
);
-
+
/**
Frees memory that was allocated with UsbHcAllocateAlignedPages().
-
+
@param PciIo The PciIo that can be used to access the host controller.
@param HostAddress The system memory address to map to the PCI controller.
@param Pages The number of pages to free.
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c index c884f4c..48eccf7 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c @@ -1,7 +1,7 @@ /** @file
The XHCI controller driver.
-Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -159,7 +159,7 @@ XhcReset ( EFI_TPL OldTpl;
Xhc = XHC_FROM_THIS (This);
-
+
if (Xhc->DevicePath != NULL) {
//
// Report Status Code to indicate reset happens
@@ -169,7 +169,7 @@ XhcReset ( (EFI_IO_BUS_USB | EFI_IOB_PC_RESET),
Xhc->DevicePath
);
- }
+ }
OldTpl = gBS->RaiseTPL (XHC_TPL);
@@ -995,7 +995,7 @@ XhcControlTransfer ( // Hook Set_Config request from UsbBus as we need configure device endpoint.
//
if ((Request->Request == USB_REQ_GET_DESCRIPTOR) &&
- ((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE)) ||
+ ((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE)) ||
((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_CLASS, USB_TARGET_DEVICE))))) {
DescriptorType = (UINT8)(Request->Value >> 8);
if ((DescriptorType == USB_DESC_TYPE_DEVICE) && ((*DataLength == sizeof (EFI_USB_DEVICE_DESCRIPTOR)) || ((DeviceSpeed == EFI_USB_SPEED_FULL) && (*DataLength == 8)))) {
@@ -1144,7 +1144,7 @@ XhcControlTransfer ( ClearPortRequest.Length = 0;
XhcControlTransfer (
- This,
+ This,
DeviceAddress,
DeviceSpeed,
MaximumPacketLength,
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf b/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf index 614938a..9bdabd1 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf @@ -3,7 +3,7 @@ # It implements the interfaces of monitoring the status of all ports and transferring
# Control, Bulk, Interrupt and Isochronous requests to those attached usb LS/FS/HS/SS devices.
#
-# Copyright (c) 2011 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -41,7 +41,7 @@ XhciReg.c
XhciSched.c
UsbHcMem.c
- UsbHcMem.h
+ UsbHcMem.h
ComponentName.c
ComponentName.h
Xhci.h
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.uni b/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.uni index 7eca8f8..20b49f1 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.uni +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.uni @@ -4,13 +4,13 @@ // It implements the interfaces of monitoring the status of all ports and transferring
// Control, Bulk, Interrupt and Isochronous requests to those attached usb LS/FS/HS/SS devices.
//
-// Copyright (c) 2011 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxeExtra.uni b/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxeExtra.uni index b2969d1..e3d2344 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxeExtra.uni +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// XhciDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"XHCI DXE Driver"
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c index 21fdcf1..6a2ef4c 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c @@ -2,7 +2,7 @@ XHCI transfer scheduling routines.
-Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -201,7 +201,7 @@ XhcFreeUrb ( if ((Xhc == NULL) || (Urb == NULL)) {
return;
}
-
+
if (Urb->DataMap != NULL) {
Xhc->PciIo->Unmap (Xhc->PciIo, Urb->DataMap);
}
@@ -269,15 +269,15 @@ XhcCreateTransferTrb ( } else {
MapOp = EfiPciIoOperationBusMasterRead;
}
-
+
Len = Urb->DataLen;
Status = Xhc->PciIo->Map (Xhc->PciIo, MapOp, Urb->Data, &Len, &PhyAddr, &Map);
-
+
if (EFI_ERROR (Status) || (Len != Urb->DataLen)) {
DEBUG ((EFI_D_ERROR, "XhcCreateTransferTrb: Fail to map Urb->Data.\n"));
return EFI_OUT_OF_RESOURCES;
}
-
+
Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
Urb->DataMap = Map;
}
@@ -469,7 +469,7 @@ XhcInitSched ( VOID *Dcbaa;
EFI_PHYSICAL_ADDRESS DcbaaPhy;
UINT64 CmdRing;
- EFI_PHYSICAL_ADDRESS CmdRingPhy;
+ EFI_PHYSICAL_ADDRESS CmdRingPhy;
UINTN Entries;
UINT32 MaxScratchpadBufs;
UINT64 *ScratchBuf;
@@ -520,7 +520,7 @@ XhcInitSched ( ScratchEntryMap = AllocateZeroPool (sizeof (UINTN) * MaxScratchpadBufs);
ASSERT (ScratchEntryMap != NULL);
Xhc->ScratchEntryMap = ScratchEntryMap;
-
+
//
// Allocate the buffer to record the host address for each entry
//
@@ -533,7 +533,7 @@ XhcInitSched ( Xhc->PciIo,
EFI_SIZE_TO_PAGES (MaxScratchpadBufs * sizeof (UINT64)),
Xhc->PageSize,
- (VOID **) &ScratchBuf,
+ (VOID **) &ScratchBuf,
&ScratchPhy,
&Xhc->ScratchMap
);
@@ -659,7 +659,7 @@ XhcRecoverHaltedEndpoint ( }
Dci = XhcEndpointToDci (Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction));
ASSERT (Dci < 32);
-
+
DEBUG ((EFI_D_INFO, "Recovery Halted Slot = %x,Dci = %x\n", SlotId, Dci));
//
@@ -721,7 +721,7 @@ XhcDequeueTrbFromEndpoint ( }
Dci = XhcEndpointToDci (Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction));
ASSERT (Dci < 32);
-
+
DEBUG ((EFI_D_INFO, "Stop Slot = %x,Dci = %x\n", SlotId, Dci));
//
@@ -792,9 +792,9 @@ CreateEventRing ( EventRing->TrbNumber = EVENT_RING_TRB_NUMBER;
EventRing->EventRingDequeue = (TRB_TEMPLATE *) EventRing->EventRingSeg0;
EventRing->EventRingEnqueue = (TRB_TEMPLATE *) EventRing->EventRingSeg0;
-
+
DequeuePhy = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Buf, Size);
-
+
//
// Software maintains an Event Ring Consumer Cycle State (CCS) bit, initializing it to '1'
// and toggling it every time the Event Ring Dequeue Pointer wraps back to the beginning of the Event Ring.
@@ -953,7 +953,7 @@ XhcFreeSched ( {
UINT32 Index;
UINT64 *ScratchEntry;
-
+
if (Xhc->ScratchBuf != NULL) {
ScratchEntry = Xhc->ScratchEntry;
for (Index = 0; Index < Xhc->MaxScratchpadBufs; Index++) {
@@ -974,14 +974,14 @@ XhcFreeSched ( UsbHcFreeMem (Xhc->MemPool, Xhc->CmdRing.RingSeg0, sizeof (TRB_TEMPLATE) * CMD_RING_TRB_NUMBER);
Xhc->CmdRing.RingSeg0 = NULL;
}
-
+
XhcFreeEventRing (Xhc,&Xhc->EventRing);
if (Xhc->DCBAA != NULL) {
UsbHcFreeMem (Xhc->MemPool, Xhc->DCBAA, (Xhc->MaxSlotsEn + 1) * sizeof(UINT64));
Xhc->DCBAA = NULL;
}
-
+
//
// Free memory pool at last
//
@@ -1132,7 +1132,7 @@ XhcCheckUrbResult ( if ((EvtTrb->Type != TRB_TYPE_COMMAND_COMPLT_EVENT) && (EvtTrb->Type != TRB_TYPE_TRANS_EVENT)) {
continue;
}
-
+
//
// Need convert pci device address to host address
//
@@ -1149,12 +1149,12 @@ XhcCheckUrbResult ( CheckedUrb = Xhc->PendingUrb;
} else if (IsTransferRingTrb (Xhc, TRBPtr, Urb)) {
CheckedUrb = Urb;
- } else if (IsAsyncIntTrb (Xhc, TRBPtr, &AsyncUrb)) {
+ } else if (IsAsyncIntTrb (Xhc, TRBPtr, &AsyncUrb)) {
CheckedUrb = AsyncUrb;
} else {
continue;
}
-
+
switch (EvtTrb->Completecode) {
case TRB_COMPLETION_STALL_ERROR:
CheckedUrb->Result |= EFI_USB_ERR_STALL;
@@ -1676,7 +1676,7 @@ XhcPollPortStatusChange ( Status = XhcInitializeDeviceSlot64 (Xhc, ParentRouteChart, Port, RouteChart, Speed);
}
}
- }
+ }
return Status;
}
@@ -3144,7 +3144,7 @@ XhcSetConfigCmd64 ( if (Dci > MaxDci) {
MaxDci = Dci;
}
-
+
IfDesc = (USB_INTERFACE_DESCRIPTOR *)((UINTN)IfDesc + IfDesc->Length);
}
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h index f40f94c..0974088 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h @@ -2,7 +2,7 @@ This file contains the definition for XHCI host controller schedule routines.
-Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -620,7 +620,7 @@ typedef struct _SLOT_CONTEXT_64 { UINT32 RsvdZ9;
UINT32 RsvdZ10;
UINT32 RsvdZ11;
-
+
UINT32 RsvdZ12;
UINT32 RsvdZ13;
UINT32 RsvdZ14;
@@ -688,12 +688,12 @@ typedef struct _ENDPOINT_CONTEXT_64 { UINT32 RsvdZ5;
UINT32 RsvdZ6;
UINT32 RsvdZ7;
-
+
UINT32 RsvdZ8;
UINT32 RsvdZ9;
UINT32 RsvdZ10;
UINT32 RsvdZ11;
-
+
UINT32 RsvdZ12;
UINT32 RsvdZ13;
UINT32 RsvdZ14;
diff --git a/MdeModulePkg/Bus/Pci/XhciPei/XhciPei.uni b/MdeModulePkg/Bus/Pci/XhciPei/XhciPei.uni index ee23b4b..b4d8cf3 100644 --- a/MdeModulePkg/Bus/Pci/XhciPei/XhciPei.uni +++ b/MdeModulePkg/Bus/Pci/XhciPei/XhciPei.uni @@ -4,14 +4,14 @@ // It produces gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
// which is used to enable recovery function from USB Drivers.
//
-// Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Pci/XhciPei/XhciPeiExtra.uni b/MdeModulePkg/Bus/Pci/XhciPei/XhciPeiExtra.uni index 0d0fc7a..73c72ed 100644 --- a/MdeModulePkg/Bus/Pci/XhciPei/XhciPeiExtra.uni +++ b/MdeModulePkg/Bus/Pci/XhciPei/XhciPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// XhciPei Localized Strings and Content
//
-// Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"XHCI PEI Module for Recovery"
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c index 21034aa..11a7f2a 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c +++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c @@ -2,7 +2,7 @@ SCSI Bus driver that layers on every SCSI Pass Thru and
Extended SCSI Pass Thru protocol in the system.
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -188,7 +188,7 @@ SCSIBusDriverBindingSupported ( SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);
//
- // To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as
+ // To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as
// EFI PassThru Protocol. From priority perspective, ExtPassThru Protocol is firstly
// tried to open on host controller handle. If fails, then PassThru Protocol is tried instead.
//
@@ -217,7 +217,7 @@ SCSIBusDriverBindingSupported ( &gEfiExtScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
- );
+ );
return EFI_SUCCESS;
} else {
//
@@ -232,7 +232,7 @@ SCSIBusDriverBindingSupported ( &gEfiExtScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
- );
+ );
if (!EFI_ERROR(Status)) {
return EFI_SUCCESS;
}
@@ -240,7 +240,7 @@ SCSIBusDriverBindingSupported ( }
//
- // Come here in 2 condition:
+ // Come here in 2 condition:
// 1. ExtPassThru doesn't exist.
// 2. ExtPassThru exists but RemainingDevicePath is invalid.
//
@@ -252,22 +252,22 @@ SCSIBusDriverBindingSupported ( Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
-
+
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
-
+
if (EFI_ERROR (Status)) {
return Status;
}
-
+
//
// Test RemainingDevicePath is valid or not.
//
if ((RemainingDevicePath != NULL) && !IsDevicePathEnd (RemainingDevicePath)) {
Status = PassThru->GetTargetLun (PassThru, RemainingDevicePath, &ScsiTargetId.ScsiId.Scsi, &Lun);
}
-
+
gBS->CloseProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
@@ -325,10 +325,10 @@ SCSIBusDriverBindingStart ( FromFirstTarget = FALSE;
ExtScsiSupport = FALSE;
PassThruStatus = EFI_SUCCESS;
-
+
TargetId = &ScsiTargetId.ScsiId.ExtScsi[0];
SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);
-
+
DevicePathStatus = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
@@ -348,10 +348,10 @@ SCSIBusDriverBindingStart ( EFI_PROGRESS_CODE,
(EFI_IO_BUS_SCSI | EFI_IOB_PC_INIT),
ParentDevicePath
- );
+ );
//
- // To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as
+ // To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as
// EFI PassThru Protocol. From priority perspective, ExtPassThru Protocol is firstly
// tried to open on host controller handle. If fails, then PassThru Protocol is tried instead.
//
@@ -386,13 +386,13 @@ SCSIBusDriverBindingStart ( This->DriverBindingHandle,
Controller
);
- }
+ }
return Status;
- }
+ }
} else {
//
- // Succeed to open ExtPassThru Protocol, and meanwhile open PassThru Protocol
- // with BY_DRIVER if it is also present on the handle. The intent is to prevent
+ // Succeed to open ExtPassThru Protocol, and meanwhile open PassThru Protocol
+ // with BY_DRIVER if it is also present on the handle. The intent is to prevent
// another SCSI Bus Driver to work on the same host handle.
//
ExtScsiSupport = TRUE;
@@ -405,7 +405,7 @@ SCSIBusDriverBindingStart ( EFI_OPEN_PROTOCOL_BY_DRIVER
);
}
-
+
if (Status != EFI_ALREADY_STARTED) {
//
// Go through here means either ExtPassThru or PassThru Protocol is successfully opened
@@ -423,14 +423,14 @@ SCSIBusDriverBindingStart ( if (ScsiBusDev->ExtScsiSupport) {
ScsiBusDev->ExtScsiInterface = ExtScsiInterface;
} else {
- ScsiBusDev->ScsiInterface = ScsiInterface;
+ ScsiBusDev->ScsiInterface = ScsiInterface;
}
//
// Install EFI_SCSI_BUS_PROTOCOL to the controller handle, So ScsiBusDev could be
// retrieved on this controller handle. With ScsiBusDev, we can know which PassThru
// Protocol is present on the handle, UEFI ExtPassThru Protocol or EFI PassThru Protocol.
- //
+ //
Status = gBS->InstallProtocolInterface (
&Controller,
&gEfiCallerIdGuid,
@@ -472,17 +472,17 @@ SCSIBusDriverBindingStart ( Lun = 0;
if (RemainingDevicePath == NULL) {
//
- // If RemainingDevicePath is NULL,
+ // If RemainingDevicePath is NULL,
// must enumerate all SCSI devices anyway
//
FromFirstTarget = TRUE;
} else if (!IsDevicePathEnd (RemainingDevicePath)) {
//
- // If RemainingDevicePath isn't the End of Device Path Node,
+ // If RemainingDevicePath isn't the End of Device Path Node,
// only scan the specified device by RemainingDevicePath
//
if (ScsiBusDev->ExtScsiSupport) {
- Status = ScsiBusDev->ExtScsiInterface->GetTargetLun (ScsiBusDev->ExtScsiInterface, RemainingDevicePath, &TargetId, &Lun);
+ Status = ScsiBusDev->ExtScsiInterface->GetTargetLun (ScsiBusDev->ExtScsiInterface, RemainingDevicePath, &TargetId, &Lun);
} else {
Status = ScsiBusDev->ScsiInterface->GetTargetLun (ScsiBusDev->ScsiInterface, RemainingDevicePath, &ScsiTargetId.ScsiId.Scsi, &Lun);
}
@@ -494,7 +494,7 @@ SCSIBusDriverBindingStart ( //
// If RemainingDevicePath is the End of Device Path Node,
// skip enumerate any device and return EFI_SUCESSS
- //
+ //
ScanOtherPuns = FALSE;
}
@@ -539,11 +539,11 @@ SCSIBusDriverBindingStart ( return EFI_SUCCESS;
ErrorExit:
-
+
if (ScsiBusDev != NULL) {
FreePool (ScsiBusDev);
}
-
+
if (ExtScsiSupport) {
gBS->CloseProtocol (
Controller,
@@ -578,7 +578,7 @@ ErrorExit: restrictions for this service. DisconnectController() must follow these
calling restrictions. If any other agent wishes to call Stop() it must also
follow these calling restrictions.
-
+
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
@@ -650,7 +650,7 @@ SCSIBusDriverBindingStop ( );
//
// When Start() succeeds to open ExtPassThru, it always tries to open PassThru BY_DRIVER.
- // Its intent is to prevent another SCSI Bus Driver from woking on the same host handle.
+ // Its intent is to prevent another SCSI Bus Driver from woking on the same host handle.
// So Stop() needs to try to close PassThru if present here.
//
gBS->CloseProtocol (
@@ -763,11 +763,11 @@ SCSIBusDriverBindingStop ( @param This Protocol instance pointer.
@param DeviceType A pointer to the device type information retrieved from
- the SCSI Controller.
+ the SCSI Controller.
@retval EFI_SUCCESS Retrieves the device type information successfully.
@retval EFI_INVALID_PARAMETER The DeviceType is NULL.
-
+
**/
EFI_STATUS
EFIAPI
@@ -833,7 +833,7 @@ ScsiGetDeviceLocation ( @retval EFI_DEVICE_ERROR Errors encountered when resetting the SCSI bus.
@retval EFI_UNSUPPORTED The bus reset operation is not supported by the
SCSI Host Controller.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset
the SCSI bus.
**/
EFI_STATUS
@@ -893,7 +893,7 @@ ScsiResetDevice ( (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET),
ScsiIoDevice->ScsiBusDeviceData->DevicePath
);
-
+
CopyMem (Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);
@@ -917,47 +917,47 @@ ScsiResetDevice ( Sends a SCSI Request Packet to the SCSI Controller for execution.
@param This Protocol instance pointer.
- @param CommandPacket The SCSI request packet to send to the SCSI
+ @param CommandPacket The SCSI request packet to send to the SCSI
Controller specified by the device handle.
@param Event If the SCSI bus where the SCSI device is attached
- does not support non-blocking I/O, then Event is
- ignored, and blocking I/O is performed.
+ does not support non-blocking I/O, then Event is
+ ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed.
- If Event is not NULL and non-blocking I/O is
+ If Event is not NULL and non-blocking I/O is
supported, then non-blocking I/O is performed,
and Event will be signaled when the SCSI Request
Packet completes.
- @retval EFI_SUCCESS The SCSI Request Packet was sent by the host
- successfully, and TransferLength bytes were
- transferred to/from DataBuffer.See
- HostAdapterStatus, TargetStatus,
+ @retval EFI_SUCCESS The SCSI Request Packet was sent by the host
+ successfully, and TransferLength bytes were
+ transferred to/from DataBuffer.See
+ HostAdapterStatus, TargetStatus,
SenseDataLength, and SenseData in that order
for additional status information.
- @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
but the entire DataBuffer could not be transferred.
The actual number of bytes transferred is returned
- in TransferLength. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ in TransferLength. See HostAdapterStatus,
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because
- there are too many SCSI Command Packets already
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
queued.The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send
- the SCSI Request Packet. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send
+ the SCSI Request Packet. See HostAdapterStatus,
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
- The SCSI Request Packet was not sent, so no
+ @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
+ The SCSI Request Packet was not sent, so no
additional status information is available.
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
- is not supported by the SCSI initiator(i.e., SCSI
+ is not supported by the SCSI initiator(i.e., SCSI
Host Controller). The SCSI Request Packet was not
- sent, so no additional status information is
+ sent, so no additional status information is
available.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
Request Packet to execute. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
**/
EFI_STATUS
@@ -973,10 +973,10 @@ ScsiExecuteSCSICommand ( UINT8 Target[TARGET_MAX_BYTES];
EFI_EVENT PacketEvent;
EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *ExtRequestPacket;
- SCSI_EVENT_DATA EventData;
+ SCSI_EVENT_DATA EventData;
PacketEvent = NULL;
-
+
if (Packet == NULL) {
return EFI_INVALID_PARAMETER;
}
@@ -1258,7 +1258,7 @@ ScsiScanCreateDevice ( return EFI_SUCCESS;
ErrorExit:
-
+
//
// The memory space for ScsiDevicePath is allocated in
// ScsiPassThru->BuildDevicePath() function; It is no longer used
@@ -1365,7 +1365,7 @@ DiscoverScsiDevice ( ScsiDeviceFound = FALSE;
goto Done;
}
-
+
//
// Retrieved inquiry data successfully
//
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h index babf86f..a637042 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h +++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h @@ -1,7 +1,7 @@ /** @file
Header file for SCSI Bus Driver.
-Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -41,7 +41,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. typedef union {
UINT32 Scsi;
- UINT8 ExtScsi[4];
+ UINT8 ExtScsi[4];
} SCSI_ID;
typedef struct _SCSI_TARGET_ID {
@@ -79,7 +79,7 @@ typedef struct _EFI_SCSI_BUS_PROTOCOL { typedef struct _SCSI_BUS_DEVICE {
UINTN Signature;
EFI_SCSI_BUS_PROTOCOL BusIdentify;
- BOOLEAN ExtScsiSupport;
+ BOOLEAN ExtScsiSupport;
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiInterface;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiInterface;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
@@ -92,7 +92,7 @@ typedef struct { EFI_HANDLE Handle;
EFI_SCSI_IO_PROTOCOL ScsiIo;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- BOOLEAN ExtScsiSupport;
+ BOOLEAN ExtScsiSupport;
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiPassThru;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiPassThru;
SCSI_BUS_DEVICE *ScsiBusDeviceData;
@@ -174,7 +174,7 @@ SCSIBusDriverBindingStart ( restrictions for this service. DisconnectController() must follow these
calling restrictions. If any other agent wishes to call Stop() it must also
follow these calling restrictions.
-
+
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
@@ -327,11 +327,11 @@ ScsiBusComponentNameGetControllerName ( @param This Protocol instance pointer.
@param DeviceType A pointer to the device type information retrieved from
- the SCSI Controller.
+ the SCSI Controller.
@retval EFI_SUCCESS Retrieves the device type information successfully.
@retval EFI_INVALID_PARAMETER The DeviceType is NULL.
-
+
**/
EFI_STATUS
EFIAPI
@@ -370,7 +370,7 @@ ScsiGetDeviceLocation ( @retval EFI_DEVICE_ERROR Errors encountered when resetting the SCSI bus.
@retval EFI_UNSUPPORTED The bus reset operation is not supported by the
SCSI Host Controller.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset
the SCSI bus.
**/
EFI_STATUS
@@ -400,47 +400,47 @@ ScsiResetDevice ( Sends a SCSI Request Packet to the SCSI Controller for execution.
@param This Protocol instance pointer.
- @param CommandPacket The SCSI request packet to send to the SCSI
+ @param CommandPacket The SCSI request packet to send to the SCSI
Controller specified by the device handle.
@param Event If the SCSI bus where the SCSI device is attached
- does not support non-blocking I/O, then Event is
- ignored, and blocking I/O is performed.
+ does not support non-blocking I/O, then Event is
+ ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed.
- If Event is not NULL and non-blocking I/O is
+ If Event is not NULL and non-blocking I/O is
supported, then non-blocking I/O is performed,
and Event will be signaled when the SCSI Request
Packet completes.
- @retval EFI_SUCCESS The SCSI Request Packet was sent by the host
- successfully, and TransferLength bytes were
- transferred to/from DataBuffer.See
- HostAdapterStatus, TargetStatus,
+ @retval EFI_SUCCESS The SCSI Request Packet was sent by the host
+ successfully, and TransferLength bytes were
+ transferred to/from DataBuffer.See
+ HostAdapterStatus, TargetStatus,
SenseDataLength, and SenseData in that order
for additional status information.
- @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
but the entire DataBuffer could not be transferred.
The actual number of bytes transferred is returned
- in TransferLength. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ in TransferLength. See HostAdapterStatus,
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because
- there are too many SCSI Command Packets already
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
queued.The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send
- the SCSI Request Packet. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send
+ the SCSI Request Packet. See HostAdapterStatus,
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
- The SCSI Request Packet was not sent, so no
+ @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
+ The SCSI Request Packet was not sent, so no
additional status information is available.
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
- is not supported by the SCSI initiator(i.e., SCSI
+ is not supported by the SCSI initiator(i.e., SCSI
Host Controller). The SCSI Request Packet was not
- sent, so no additional status information is
+ sent, so no additional status information is
available.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
Request Packet to execute. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.uni b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.uni index d1a338b..122c1a4 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.uni +++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.uni @@ -4,13 +4,13 @@ // Note that the driver will install the Device Path Protocol and SCSI I/O Protocol on
// these handles.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf index 18ffd88..abcd267 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf +++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf @@ -2,16 +2,16 @@ # The SCSI bus driver scans all SCSI devices and creates a device handle for each of them.
# Note that the driver will install the Device Path Protocol and SCSI I/O Protocol on
# these handles.
-#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+#
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
-#
+#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
+#
##
[Defines]
@@ -29,7 +29,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
-# DRIVER_BINDING = gSCSIBusDriverBinding
+# DRIVER_BINDING = gSCSIBusDriverBinding
# COMPONENT_NAME = gScsiBusComponentName
# COMPONENT_NAME2 = gScsiBusComponentName2
#
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusExtra.uni b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusExtra.uni index bc09a5e..29b08bc 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusExtra.uni +++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusExtra.uni @@ -1,7 +1,7 @@ // /** @file
// ScsiBus Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"SCSI Bus DXE Driver"
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c index 08b71d0..f2da7af 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c @@ -1,7 +1,7 @@ /** @file
UEFI Component Name(2) protocol implementation for SCSI disk driver.
-Copyright (c) 2004 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -183,7 +183,7 @@ ScsiDiskComponentNameGetControllerName ( if (ChildHandle != NULL) {
return EFI_UNSUPPORTED;
}
-
+
//
// Make sure this driver is currently managing ControllerHandle
//
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c index 6a0a193..0d63c85 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c @@ -1,7 +1,7 @@ /** @file
SCSI disk driver that layers on every SCSI IO protocol in the system.
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -79,9 +79,9 @@ FreeAlignedBuffer ( The user code starts with this function.
- @param ImageHandle The firmware allocated handle for the EFI image.
+ @param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
-
+
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
@@ -356,7 +356,7 @@ ScsiDiskDriverBindingStart ( );
return EFI_SUCCESS;
}
- }
+ }
}
gBS->FreePool (ScsiDiskDevice->SenseData);
@@ -368,7 +368,7 @@ ScsiDiskDriverBindingStart ( Controller
);
return Status;
-
+
}
@@ -380,7 +380,7 @@ ScsiDiskDriverBindingStart ( restrictions for this service. DisconnectController() must follow these
calling restrictions. If any other agent wishes to call Stop() it must
also follow these calling restrictions.
-
+
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
@@ -1720,7 +1720,7 @@ Done: @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param MustReadCapacity The flag about reading device capacity
- @param MediaChange The pointer of flag indicates if media has changed
+ @param MediaChange The pointer of flag indicates if media has changed
@retval EFI_DEVICE_ERROR Indicates that error occurs
@retval EFI_SUCCESS Successfully to detect media
@@ -1855,7 +1855,7 @@ ScsiDiskDetectMedia ( } else {
break;
}
- } else {
+ } else {
Retry++;
if (!NeedRetry || (Retry >= MaxRetry)) {
goto EXIT;
@@ -2059,7 +2059,7 @@ ScsiDiskInquiryDevice ( EFI_SCSI_PAGE_CODE_BLOCK_LIMITS_VPD
);
if (!EFI_ERROR (Status)) {
- ScsiDiskDevice->BlkIo.Media->OptimalTransferLengthGranularity =
+ ScsiDiskDevice->BlkIo.Media->OptimalTransferLengthGranularity =
(BlockLimits->OptimalTransferLengthGranularity2 << 8) |
BlockLimits->OptimalTransferLengthGranularity1;
@@ -2111,7 +2111,7 @@ ScsiDiskInquiryDevice ( } else if (Status == EFI_NOT_READY) {
*NeedRetry = TRUE;
return EFI_DEVICE_ERROR;
-
+
} else if ((Status == EFI_INVALID_PARAMETER) || (Status == EFI_UNSUPPORTED)) {
*NeedRetry = FALSE;
return EFI_DEVICE_ERROR;
@@ -2147,7 +2147,7 @@ ScsiDiskInquiryDevice ( *NeedRetry = FALSE;
return EFI_DEVICE_ERROR;
}
-
+
//
// if goes here, meant ScsiInquiryCommand() failed.
// if ScsiDiskRequestSenseKeys() succeeds at last,
@@ -2303,7 +2303,7 @@ ScsiDiskTestUnitReady ( @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param SenseData The pointer of EFI_SCSI_SENSE_DATA
- @param NumberOfSenseKeys The number of sense key
+ @param NumberOfSenseKeys The number of sense key
@param Action The pointer of action which indicates what is need to do next
@retval EFI_DEVICE_ERROR Indicates that error occurs
@@ -2444,7 +2444,7 @@ ScsiDiskReadCapacity ( *NeedRetry = FALSE;
//
- // submit Read Capacity(10) Command. If it returns capacity of FFFFFFFFh,
+ // submit Read Capacity(10) Command. If it returns capacity of FFFFFFFFh,
// 16 byte command should be used to access large hard disk >2TB
//
CommandStatus = ScsiReadCapacityCommand (
@@ -2508,12 +2508,12 @@ ScsiDiskReadCapacity ( // go ahead to check HostAdapterStatus and TargetStatus
// (EFI_TIMEOUT, EFI_DEVICE_ERROR, EFI_WARN_BUFFER_TOO_SMALL)
//
-
+
Status = CheckHostAdapterStatus (HostAdapterStatus);
if ((Status == EFI_TIMEOUT) || (Status == EFI_NOT_READY)) {
*NeedRetry = TRUE;
return EFI_DEVICE_ERROR;
-
+
} else if (Status == EFI_DEVICE_ERROR) {
//
// reset the scsi channel
@@ -2536,7 +2536,7 @@ ScsiDiskReadCapacity ( *NeedRetry = FALSE;
return EFI_DEVICE_ERROR;
}
-
+
//
// if goes here, meant ScsiReadCapacityCommand() failed.
// if ScsiDiskRequestSenseKeys() succeeds at last,
@@ -2616,7 +2616,7 @@ CheckHostAdapterStatus ( @param TargetStatus Target status
@retval EFI_NOT_READY Device is NOT ready.
- @retval EFI_DEVICE_ERROR
+ @retval EFI_DEVICE_ERROR
@retval EFI_SUCCESS
**/
@@ -2708,20 +2708,20 @@ ScsiDiskRequestSenseKeys ( );
if ((Status == EFI_SUCCESS) || (Status == EFI_WARN_BUFFER_TOO_SMALL)) {
FallStatus = EFI_SUCCESS;
-
+
} else if ((Status == EFI_TIMEOUT) || (Status == EFI_NOT_READY)) {
*NeedRetry = TRUE;
FallStatus = EFI_DEVICE_ERROR;
-
+
} else if ((Status == EFI_INVALID_PARAMETER) || (Status == EFI_UNSUPPORTED)) {
*NeedRetry = FALSE;
FallStatus = EFI_DEVICE_ERROR;
-
+
} else if (Status == EFI_DEVICE_ERROR) {
if (AskResetIfError) {
ScsiDiskDevice->ScsiIo->ResetDevice (ScsiDiskDevice->ScsiIo);
}
-
+
FallStatus = EFI_DEVICE_ERROR;
}
@@ -2743,7 +2743,7 @@ ScsiDiskRequestSenseKeys ( // no more sense key or number of sense keys exceeds predefined,
// skip the loop.
//
- if ((PtrSenseData->Sense_Key == EFI_SCSI_SK_NO_SENSE) ||
+ if ((PtrSenseData->Sense_Key == EFI_SCSI_SK_NO_SENSE) ||
(*NumberOfSenseKeys == ScsiDiskDevice->SenseDataNumber)) {
SenseReq = FALSE;
}
@@ -2777,9 +2777,9 @@ GetMediaInfo ( (Capacity10->LastLba2 << 16) |
(Capacity10->LastLba1 << 8) |
Capacity10->LastLba0;
-
+
ScsiDiskDevice->BlkIo.Media->BlockSize = (Capacity10->BlockSize3 << 24) |
- (Capacity10->BlockSize2 << 16) |
+ (Capacity10->BlockSize2 << 16) |
(Capacity10->BlockSize1 << 8) |
Capacity10->BlockSize0;
ScsiDiskDevice->BlkIo.Media->LowestAlignedLba = 0;
@@ -2799,7 +2799,7 @@ GetMediaInfo ( *Ptr = Capacity16->LastLba7;
ScsiDiskDevice->BlkIo.Media->BlockSize = (Capacity16->BlockSize3 << 24) |
- (Capacity16->BlockSize2 << 16) |
+ (Capacity16->BlockSize2 << 16) |
(Capacity16->BlockSize1 << 8) |
Capacity16->BlockSize0;
@@ -2870,7 +2870,7 @@ ScsiDiskReadSectors ( BlocksRemaining = NumberOfBlocks;
BlockSize = ScsiDiskDevice->BlkIo.Media->BlockSize;
-
+
//
// limit the data bytes that can be transferred by one Read(10) or Read(16) Command
//
@@ -3114,7 +3114,7 @@ ScsiDiskWriteSectors ( &ByteCount,
Lba,
SectorCount
- );
+ );
}
if (!EFI_ERROR (Status)) {
break;
@@ -4994,7 +4994,7 @@ ScsiDiskIsHardwareError ( SensePtr = SenseData;
for (Index = 0; Index < SenseCounts; Index++) {
-
+
//
// Sense Key is EFI_SCSI_SK_HARDWARE_ERROR (0x4)
//
@@ -5071,7 +5071,7 @@ ScsiDiskIsResetBefore ( SensePtr = SenseData;
for (Index = 0; Index < SenseCounts; Index++) {
-
+
//
// Sense Key is EFI_SCSI_SK_UNIT_ATTENTION (0x6)
// Additional Sense Code is EFI_SCSI_ASC_RESET (0x29)
@@ -5092,7 +5092,7 @@ ScsiDiskIsResetBefore ( @param SenseData The pointer of EFI_SCSI_SENSE_DATA
@param SenseCounts The number of sense key
- @param RetryLater The flag means if need a retry
+ @param RetryLater The flag means if need a retry
@retval TRUE Drive is ready.
@retval FALSE Drive is NOT ready.
@@ -5187,7 +5187,7 @@ ScsiDiskHaveSenseKey ( SensePtr = SenseData;
for (Index = 0; Index < SenseCounts; Index++) {
-
+
//
// Sense Key is SK_NO_SENSE (0x0)
//
@@ -5234,18 +5234,18 @@ ReleaseScsiDiskDeviceResources ( /**
Determine if Block Io & Block Io2 should be produced.
-
+
@param ChildHandle Child Handle to retrieve Parent information.
-
+
@retval TRUE Should produce Block Io & Block Io2.
@retval FALSE Should not produce Block Io & Block Io2.
-**/
+**/
BOOLEAN
DetermineInstallBlockIo (
IN EFI_HANDLE ChildHandle
- )
+ )
{
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiPassThru;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiPassThru;
@@ -5271,7 +5271,7 @@ DetermineInstallBlockIo ( return TRUE;
}
}
-
+
return FALSE;
}
@@ -5280,23 +5280,23 @@ DetermineInstallBlockIo ( specified by ProtocolGuid is present on a ControllerHandle and opened by
ChildHandle with an attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
If the ControllerHandle is found, then the protocol specified by ProtocolGuid
- will be opened on it.
-
+ will be opened on it.
+
@param ProtocolGuid ProtocolGuid pointer.
@param ChildHandle Child Handle to retrieve Parent information.
-
-**/
+
+**/
VOID *
EFIAPI
GetParentProtocol (
IN EFI_GUID *ProtocolGuid,
IN EFI_HANDLE ChildHandle
- )
+ )
{
UINTN Index;
UINTN HandleCount;
- VOID *Interface;
+ VOID *Interface;
EFI_STATUS Status;
EFI_HANDLE *HandleBuffer;
@@ -5316,7 +5316,7 @@ GetParentProtocol ( }
//
- // Iterate to find who is parent handle that is opened with ProtocolGuid by ChildHandle
+ // Iterate to find who is parent handle that is opened with ProtocolGuid by ChildHandle
//
for (Index = 0; Index < HandleCount; Index++) {
Status = EfiTestChildHandle (HandleBuffer[Index], ChildHandle, ProtocolGuid);
@@ -5331,7 +5331,7 @@ GetParentProtocol ( gBS->FreePool (HandleBuffer);
return NULL;
-}
+}
/**
Determine if EFI Erase Block Protocol should be produced.
@@ -5468,7 +5468,7 @@ Done: /**
Provides inquiry information for the controller type.
-
+
This function is used by the IDE bus driver to get inquiry data. Data format
of Identify data is defined by the Interface GUID.
@@ -5477,9 +5477,9 @@ Done: @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading InquiryData from device
- @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
**/
EFI_STATUS
@@ -5511,16 +5511,16 @@ ScsiDiskInfoInquiry ( This function is used by the IDE bus driver to get identify data. Data format
of Identify data is defined by the Interface GUID.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
instance.
@param[in, out] IdentifyData Pointer to a buffer for the identify data.
@param[in, out] IdentifyDataSize Pointer to the value for the identify data
size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
- @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
**/
EFI_STATUS
@@ -5536,7 +5536,7 @@ ScsiDiskInfoIdentify ( if (CompareGuid (&This->Interface, &gEfiDiskInfoScsiInterfaceGuid) || CompareGuid (&This->Interface, &gEfiDiskInfoUfsInterfaceGuid)) {
//
- // Physical SCSI bus does not support this data class.
+ // Physical SCSI bus does not support this data class.
//
return EFI_NOT_FOUND;
}
@@ -5554,8 +5554,8 @@ ScsiDiskInfoIdentify ( /**
Provides sense data information for the controller type.
-
- This function is used by the IDE bus driver to get sense data.
+
+ This function is used by the IDE bus driver to get sense data.
Data format of Sense data is defined by the Interface GUID.
@param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@@ -5585,7 +5585,7 @@ ScsiDiskInfoSenseData ( /**
This function is used by the IDE bus driver to get controller information.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
@param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
@@ -5626,11 +5626,11 @@ ScsiDiskInfoWhichIde ( via SCSI Request Packet.
@param ScsiDiskDevice The pointer of SCSI_DISK_DEV
-
+
@retval EFI_SUCCESS The ATAPI device identify data were retrieved successfully.
@retval others Some error occurred during the identification that ATAPI device.
-**/
+**/
EFI_STATUS
AtapiIdentifyDevice (
IN OUT SCSI_DISK_DEV *ScsiDiskDevice
@@ -5666,8 +5666,8 @@ AtapiIdentifyDevice ( @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
@param ChildHandle Child handle to install DiskInfo protocol.
-
-**/
+
+**/
VOID
InitializeInstallDiskInfo (
IN SCSI_DISK_DEV *ScsiDiskDevice,
@@ -5683,7 +5683,7 @@ InitializeInstallDiskInfo ( Status = gBS->HandleProtocol (ChildHandle, &gEfiDevicePathProtocolGuid, (VOID **) &DevicePathNode);
//
- // Device Path protocol must be installed on the device handle.
+ // Device Path protocol must be installed on the device handle.
//
ASSERT_EFI_ERROR (Status);
//
@@ -5715,7 +5715,7 @@ InitializeInstallDiskInfo ( ScsiDiskDevice->Channel = AtapiDevicePath->PrimarySecondary;
ScsiDiskDevice->Device = AtapiDevicePath->SlaveMaster;
//
- // Update the DiskInfo.Interface to IDE interface GUID for the physical ATAPI device.
+ // Update the DiskInfo.Interface to IDE interface GUID for the physical ATAPI device.
//
CopyGuid (&ScsiDiskDevice->DiskInfo.Interface, &gEfiDiskInfoIdeInterfaceGuid);
} else {
@@ -5726,7 +5726,7 @@ InitializeInstallDiskInfo ( ScsiDiskDevice->Channel = SataDevicePath->HBAPortNumber;
ScsiDiskDevice->Device = SataDevicePath->PortMultiplierPortNumber;
//
- // Update the DiskInfo.Interface to AHCI interface GUID for the physical AHCI device.
+ // Update the DiskInfo.Interface to AHCI interface GUID for the physical AHCI device.
//
CopyGuid (&ScsiDiskDevice->DiskInfo.Interface, &gEfiDiskInfoAhciInterfaceGuid);
}
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h index 6e9f032..bb62326 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h @@ -1,7 +1,7 @@ /** @file
Header file for SCSI Disk Driver.
-Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -86,7 +86,7 @@ typedef struct { //
SCSI_UNMAP_PARAM_INFO UnmapInfo;
BOOLEAN BlockLimitsVpdSupported;
-
+
//
// The flag indicates if 16-byte command can be used
//
@@ -251,7 +251,7 @@ ScsiDiskDriverBindingStart ( restrictions for this service. DisconnectController() must follow these
calling restrictions. If any other agent wishes to call Stop() it must
also follow these calling restrictions.
-
+
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
@@ -646,7 +646,7 @@ ScsiDiskEraseBlocks ( /**
Provides inquiry information for the controller type.
-
+
This function is used by the IDE bus driver to get inquiry data. Data format
of Identify data is defined by the Interface GUID.
@@ -655,9 +655,9 @@ ScsiDiskEraseBlocks ( @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading InquiryData from device
- @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
**/
EFI_STATUS
@@ -675,16 +675,16 @@ ScsiDiskInfoInquiry ( This function is used by the IDE bus driver to get identify data. Data format
of Identify data is defined by the Interface GUID.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
instance.
@param[in, out] IdentifyData Pointer to a buffer for the identify data.
@param[in, out] IdentifyDataSize Pointer to the value for the identify data
size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
- @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
**/
EFI_STATUS
@@ -698,8 +698,8 @@ ScsiDiskInfoIdentify ( /**
Provides sense data information for the controller type.
-
- This function is used by the IDE bus driver to get sense data.
+
+ This function is used by the IDE bus driver to get sense data.
Data format of Sense data is defined by the Interface GUID.
@param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@@ -725,7 +725,7 @@ ScsiDiskInfoSenseData ( /**
This function is used by the IDE bus driver to get controller information.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
@param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
@@ -747,7 +747,7 @@ ScsiDiskInfoWhichIde ( @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param MustReadCapacity The flag about reading device capacity
- @param MediaChange The pointer of flag indicates if media has changed
+ @param MediaChange The pointer of flag indicates if media has changed
@retval EFI_DEVICE_ERROR Indicates that error occurs
@retval EFI_SUCCESS Successfully to detect media
@@ -790,7 +790,7 @@ ScsiDiskTestUnitReady ( @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param SenseData The pointer of EFI_SCSI_SENSE_DATA
- @param NumberOfSenseKeys The number of sense key
+ @param NumberOfSenseKeys The number of sense key
@param Action The pointer of action which indicates what is need to do next
@retval EFI_DEVICE_ERROR Indicates that error occurs
@@ -849,7 +849,7 @@ CheckHostAdapterStatus ( @param TargetStatus Target status
@retval EFI_NOT_READY Device is NOT ready.
- @retval EFI_DEVICE_ERROR
+ @retval EFI_DEVICE_ERROR
@retval EFI_SUCCESS
**/
@@ -1071,7 +1071,7 @@ ScsiDiskRead16 ( IN UINT64 StartLba,
IN UINT32 SectorCount
);
-
+
/**
Submit Write(16) Command.
@@ -1095,7 +1095,7 @@ ScsiDiskWrite16 ( IN OUT UINT32 *DataLength,
IN UINT64 StartLba,
IN UINT32 SectorCount
- );
+ );
/**
Submit Async Read(10) command.
@@ -1326,7 +1326,7 @@ ScsiDiskIsResetBefore ( @param SenseData The pointer of EFI_SCSI_SENSE_DATA
@param SenseCounts The number of sense key
- @param RetryLater The flag means if need a retry
+ @param RetryLater The flag means if need a retry
@retval TRUE Drive is ready.
@retval FALSE Drive is NOT ready.
@@ -1368,14 +1368,14 @@ ReleaseScsiDiskDeviceResources ( /**
Determine if Block Io should be produced.
-
+
@param ChildHandle Child Handle to retrieve Parent information.
-
+
@retval TRUE Should produce Block Io.
@retval FALSE Should not produce Block Io.
-**/
+**/
BOOLEAN
DetermineInstallBlockIo (
IN EFI_HANDLE ChildHandle
@@ -1391,26 +1391,26 @@ DetermineInstallBlockIo ( @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
@param ChildHandle Child handle to install DiskInfo protocol.
-
-**/
+
+**/
VOID
InitializeInstallDiskInfo (
IN SCSI_DISK_DEV *ScsiDiskDevice,
IN EFI_HANDLE ChildHandle
- );
+ );
/**
Search protocol database and check to see if the protocol
specified by ProtocolGuid is present on a ControllerHandle and opened by
ChildHandle with an attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
If the ControllerHandle is found, then the protocol specified by ProtocolGuid
- will be opened on it.
-
+ will be opened on it.
+
@param ProtocolGuid ProtocolGuid pointer.
@param ChildHandle Child Handle to retrieve Parent information.
-
-**/
+
+**/
VOID *
EFIAPI
GetParentProtocol (
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.uni b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.uni index 73f8096..a5db55c 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.uni +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.uni @@ -3,13 +3,13 @@ //
// It detects the SCSI disk media and installs Block I/O Protocol on the device handle.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf index 3fbc589..397d314 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf @@ -2,16 +2,16 @@ # The Scsi Disk driver is used to retrieve the media info in the attached SCSI disk.
# It detects the SCSI disk media and installs Block I/O and Block I/O2 Protocol on
# the device handle.
-#
-# Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
+#
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
-#
+#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
+#
##
[Defines]
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskExtra.uni b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskExtra.uni index 2c7fdfb..08b0e37 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskExtra.uni +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskExtra.uni @@ -1,7 +1,7 @@ // /** @file
// ScsiDisk Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"SCSI Disk DXE Driver"
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c index 4ebced0..2ed4d2e 100644 --- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c +++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c @@ -4,7 +4,7 @@ It produces BlockIo, BlockIo2 and StorageSecurity protocols to allow upper layer
access the EMMC device.
- Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -505,7 +505,7 @@ InstallProtocolOnPartition ( Device->Private->DriverBindingHandle,
Partition->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
- );
+ );
}
} else {
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.c b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.c index 9282309..505b92c 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.c +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.c @@ -1,6 +1,6 @@ /** @file
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -153,10 +153,10 @@ UFS_PEIM_HC_PRIVATE_DATA gUfsHcPeimTemplate = { EFI_STATUS
UfsPeimRequestSense (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
- IN UINTN Lun,
+ IN UINTN Lun,
OUT VOID *DataBuffer,
OUT UINT32 *DataBufferLength
- )
+ )
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
@@ -201,10 +201,10 @@ UfsPeimRequestSense ( EFI_STATUS
UfsPeimTestUnitReady (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
- IN UINTN Lun,
+ IN UINTN Lun,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
- )
+ )
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
@@ -254,7 +254,7 @@ UfsPeimInquiry ( OUT UINT32 *InquiryLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
- )
+ )
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
@@ -311,7 +311,7 @@ UfsPeimReadCapacity ( OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
- )
+ )
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_TEN];
@@ -367,7 +367,7 @@ UfsPeimReadCapacity16 ( OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
- )
+ )
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
@@ -429,7 +429,7 @@ UfsPeimRead10 ( OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
- )
+ )
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_TEN];
@@ -491,7 +491,7 @@ UfsPeimRead16 ( OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
- )
+ )
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
@@ -597,16 +597,16 @@ UfsPeimParsingSenseKeys ( /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -633,41 +633,41 @@ UfsBlockIoPeimGetDeviceNo ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
- @par Note:
- The MediaInfo structure describes an enumeration of possible block device
- types. This enumeration exists because no device paths are actually passed
- across interfaces that describe the type or class of hardware that is publishing
+ @par Note:
+ The MediaInfo structure describes an enumeration of possible block device
+ types. This enumeration exists because no device paths are actually passed
+ across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
- in the Recovery PEIM, such as "Try to recover from legacy floppy first,
- LS-120 second, CD-ROM third." If there are multiple partitions abstracted
- by a given device type, they should be reported in ascending order; this
- order also applies to nested partitions, such as legacy MBR, where the
- outermost partitions would have precedence in the reporting order. The
- same logic applies to systems such as IDE that have precedence relationships
- like "Master/Slave" or "Primary/Secondary". The master device should be
+ in the Recovery PEIM, such as "Try to recover from legacy floppy first,
+ LS-120 second, CD-ROM third." If there are multiple partitions abstracted
+ by a given device type, they should be reported in ascending order; this
+ order also applies to nested partitions, such as legacy MBR, where the
+ outermost partitions would have precedence in the reporting order. The
+ same logic applies to systems such as IDE that have precedence relationships
+ like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
-
- @retval EFI_SUCCESS Media information about the specified block device
+
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -687,7 +687,7 @@ UfsBlockIoPeimGetMediaInfo ( EFI_SCSI_DISK_CAPACITY_DATA Capacity;
EFI_SCSI_DISK_CAPACITY_DATA16 Capacity16;
UINTN DataLength;
- BOOLEAN NeedRetry;
+ BOOLEAN NeedRetry;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS (This);
NeedRetry = TRUE;
@@ -717,7 +717,7 @@ UfsBlockIoPeimGetMediaInfo ( if (!EFI_ERROR (Status)) {
break;
}
-
+
if (SenseDataLength == 0) {
continue;
}
@@ -763,31 +763,31 @@ UfsBlockIoPeimGetMediaInfo ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
-
+
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -811,7 +811,7 @@ UfsBlockIoPeimReadBlocks ( UFS_PEIM_HC_PRIVATE_DATA *Private;
EFI_SCSI_SENSE_DATA SenseData;
UINT8 SenseDataLength;
- BOOLEAN NeedRetry;
+ BOOLEAN NeedRetry;
Status = EFI_SUCCESS;
NeedRetry = TRUE;
@@ -861,7 +861,7 @@ UfsBlockIoPeimReadBlocks ( if (!EFI_ERROR (Status)) {
break;
}
-
+
if (SenseDataLength == 0) {
continue;
}
@@ -903,16 +903,16 @@ UfsBlockIoPeimReadBlocks ( /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -939,41 +939,41 @@ UfsBlockIoPeimGetDeviceNo2 ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
- @par Note:
- The MediaInfo structure describes an enumeration of possible block device
- types. This enumeration exists because no device paths are actually passed
- across interfaces that describe the type or class of hardware that is publishing
+ @par Note:
+ The MediaInfo structure describes an enumeration of possible block device
+ types. This enumeration exists because no device paths are actually passed
+ across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
- in the Recovery PEIM, such as "Try to recover from legacy floppy first,
- LS-120 second, CD-ROM third." If there are multiple partitions abstracted
- by a given device type, they should be reported in ascending order; this
- order also applies to nested partitions, such as legacy MBR, where the
- outermost partitions would have precedence in the reporting order. The
- same logic applies to systems such as IDE that have precedence relationships
- like "Master/Slave" or "Primary/Secondary". The master device should be
+ in the Recovery PEIM, such as "Try to recover from legacy floppy first,
+ LS-120 second, CD-ROM third." If there are multiple partitions abstracted
+ by a given device type, they should be reported in ascending order; this
+ order also applies to nested partitions, such as legacy MBR, where the
+ outermost partitions would have precedence in the reporting order. The
+ same logic applies to systems such as IDE that have precedence relationships
+ like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
-
- @retval EFI_SUCCESS Media information about the specified block device
+
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -991,7 +991,7 @@ UfsBlockIoPeimGetMediaInfo2 ( EFI_PEI_BLOCK_IO_MEDIA Media;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);
-
+
Status = UfsBlockIoPeimGetMediaInfo (
PeiServices,
&Private->BlkIoPpi,
@@ -1009,31 +1009,31 @@ UfsBlockIoPeimGetMediaInfo2 ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
-
+
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -1052,7 +1052,7 @@ UfsBlockIoPeimReadBlocks2 ( )
{
EFI_STATUS Status;
- UFS_PEIM_HC_PRIVATE_DATA *Private;
+ UFS_PEIM_HC_PRIVATE_DATA *Private;
Status = EFI_SUCCESS;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);
@@ -1118,7 +1118,7 @@ UfsEndOfPei ( /**
The user code starts with this function.
-
+
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@@ -1205,8 +1205,8 @@ InitializeUfsBlockIoPeim ( //
// UFS 2.0 spec Section 13.1.3.3:
- // At the end of the UFS Interconnect Layer initialization on both host and device side,
- // the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
+ // At the end of the UFS Interconnect Layer initialization on both host and device side,
+ // the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
//
Status = UfsExecNopCmds (Private);
if (EFI_ERROR (Status)) {
@@ -1241,7 +1241,7 @@ InitializeUfsBlockIoPeim ( DEBUG ((EFI_D_INFO, "Ufs %d Lun %d is enabled\n", Controller, Index));
}
}
-
+
PeiServicesInstallPpi (&Private->BlkIoPpiList);
PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
Controller++;
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.h b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.h index 345947c..3f0d07d 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.h +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.h @@ -1,6 +1,6 @@ /** @file
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -102,7 +102,7 @@ typedef struct { UINT8 SenseDataLength;
} UFS_SCSI_REQUEST_PACKET;
-typedef struct _UFS_PEIM_HC_PRIVATE_DATA {
+typedef struct _UFS_PEIM_HC_PRIVATE_DATA {
UINT32 Signature;
EFI_HANDLE Controller;
@@ -282,16 +282,16 @@ UfsExecNopCmds ( /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -309,41 +309,41 @@ UfsBlockIoPeimGetDeviceNo ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
- @par Note:
- The MediaInfo structure describes an enumeration of possible block device
- types. This enumeration exists because no device paths are actually passed
- across interfaces that describe the type or class of hardware that is publishing
+ @par Note:
+ The MediaInfo structure describes an enumeration of possible block device
+ types. This enumeration exists because no device paths are actually passed
+ across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
- in the Recovery PEIM, such as "Try to recover from legacy floppy first,
- LS-120 second, CD-ROM third." If there are multiple partitions abstracted
- by a given device type, they should be reported in ascending order; this
- order also applies to nested partitions, such as legacy MBR, where the
- outermost partitions would have precedence in the reporting order. The
- same logic applies to systems such as IDE that have precedence relationships
- like "Master/Slave" or "Primary/Secondary". The master device should be
+ in the Recovery PEIM, such as "Try to recover from legacy floppy first,
+ LS-120 second, CD-ROM third." If there are multiple partitions abstracted
+ by a given device type, they should be reported in ascending order; this
+ order also applies to nested partitions, such as legacy MBR, where the
+ outermost partitions would have precedence in the reporting order. The
+ same logic applies to systems such as IDE that have precedence relationships
+ like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
-
- @retval EFI_SUCCESS Media information about the specified block device
+
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -359,31 +359,31 @@ UfsBlockIoPeimGetMediaInfo ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
-
+
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -404,16 +404,16 @@ UfsBlockIoPeimReadBlocks ( /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -431,41 +431,41 @@ UfsBlockIoPeimGetDeviceNo2 ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
- @par Note:
- The MediaInfo structure describes an enumeration of possible block device
- types. This enumeration exists because no device paths are actually passed
- across interfaces that describe the type or class of hardware that is publishing
+ @par Note:
+ The MediaInfo structure describes an enumeration of possible block device
+ types. This enumeration exists because no device paths are actually passed
+ across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
- in the Recovery PEIM, such as "Try to recover from legacy floppy first,
- LS-120 second, CD-ROM third." If there are multiple partitions abstracted
- by a given device type, they should be reported in ascending order; this
- order also applies to nested partitions, such as legacy MBR, where the
- outermost partitions would have precedence in the reporting order. The
- same logic applies to systems such as IDE that have precedence relationships
- like "Master/Slave" or "Primary/Secondary". The master device should be
+ in the Recovery PEIM, such as "Try to recover from legacy floppy first,
+ LS-120 second, CD-ROM third." If there are multiple partitions abstracted
+ by a given device type, they should be reported in ascending order; this
+ order also applies to nested partitions, such as legacy MBR, where the
+ outermost partitions would have precedence in the reporting order. The
+ same logic applies to systems such as IDE that have precedence relationships
+ like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
-
- @retval EFI_SUCCESS Media information about the specified block device
+
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -481,31 +481,31 @@ UfsBlockIoPeimGetMediaInfo2 ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
-
+
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -525,7 +525,7 @@ UfsBlockIoPeimReadBlocks2 ( /**
Initialize the memory management pool for the host controller.
-
+
@param Private The Ufs Peim driver private data.
@retval EFI_SUCCESS The memory pool is initialized.
@@ -554,7 +554,7 @@ UfsPeimFreeMemPool ( /**
Allocate some memory from the host controller's memory pool
which can be used to communicate with host controller.
-
+
@param Pool The host controller's memory pool.
@param Size Size of the memory to allocate.
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.uni b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.uni index 04b9f3b..5118443 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.uni +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.uni @@ -3,14 +3,14 @@ //
// The UfsBlockIoPei driver is used to support recovery from UFS device.
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPeiExtra.uni b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPeiExtra.uni index 0ce3004..b56f0bd 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPeiExtra.uni +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UfsBlockIoPei Localized Strings and Content
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
@@ -14,8 +14,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"UFS BlockIo Peim for Recovery"
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.c b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.c index b9e3859..d69e6e7 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.c +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.c @@ -1,7 +1,7 @@ /** @file
-Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -44,17 +44,17 @@ UfsPeimAllocMemBlock ( }
ZeroMem ((VOID*)(UINTN)TempPtr, sizeof(UFS_PEIM_MEM_BLOCK));
-
+
//
// each bit in the bit array represents UFS_PEIM_MEM_UNIT
// bytes of memory in the memory block.
//
ASSERT (UFS_PEIM_MEM_UNIT * 8 <= EFI_PAGE_SIZE);
-
+
Block = (UFS_PEIM_MEM_BLOCK*)(UINTN)TempPtr;
Block->BufLen = EFI_PAGES_TO_SIZE (Pages);
Block->BitsLen = Block->BufLen / (UFS_PEIM_MEM_UNIT * 8);
-
+
Status = PeiServicesAllocatePool (Block->BitsLen, &TempPtr);
if (EFI_ERROR (Status)) {
return NULL;
@@ -158,7 +158,7 @@ UfsPeimAllocMemFromBlock ( if (Available < Units) {
return NULL;
}
-
+
//
// Mark the memory as allocated
//
@@ -209,7 +209,7 @@ UfsPeimIsMemBlockEmpty ( {
UINTN Index;
-
+
for (Index = 0; Index < Block->BitsLen; Index++) {
if (Block->Bits[Index] != 0) {
return FALSE;
@@ -247,7 +247,7 @@ UfsPeimUnlinkMemBlock ( /**
Initialize the memory management pool for the host controller.
-
+
@param Private The Ufs Peim driver private data.
@retval EFI_SUCCESS The memory pool is initialized.
@@ -265,7 +265,7 @@ UfsPeimInitMemPool ( TempPtr = NULL;
Pool = NULL;
-
+
Status = PeiServicesAllocatePool (sizeof (UFS_PEIM_MEM_POOL), &TempPtr);
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
@@ -287,7 +287,7 @@ UfsPeimInitMemPool ( /**
Release the memory management pool.
-
+
@param Pool The memory pool to free.
@retval EFI_DEVICE_ERROR Fail to free the memory pool.
@@ -320,7 +320,7 @@ UfsPeimFreeMemPool ( /**
Allocate some memory from the host controller's memory pool
which can be used to communicate with host controller.
-
+
@param Pool The host controller's memory pool.
@param Size Size of the memory to allocate.
@@ -377,7 +377,7 @@ UfsPeimAllocateMem ( if (NewBlock == NULL) {
return NULL;
}
-
+
//
// Add the new memory block to the pool, then allocate memory from it
//
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.h b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.h index 60db079..0b95f0f 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.h +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHcMem.h @@ -1,7 +1,7 @@ /** @file
-Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -25,7 +25,7 @@ typedef struct _UFS_PEIM_MEM_BLOCK UFS_PEIM_MEM_BLOCK; struct _UFS_PEIM_MEM_BLOCK {
UINT8 *Bits; // Bit array to record which unit is allocated
- UINTN BitsLen;
+ UINTN BitsLen;
UINT8 *Buf;
UINT8 *BufHost;
UINTN BufLen; // Memory size in bytes
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c index 55c7806..e36ff8c 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c @@ -1,6 +1,6 @@ /** @file
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -108,13 +108,13 @@ DumpUicCmdExecResult ( break;
case 0x08:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - PEER_COMMUNICATION_FAILURE\n"));
- break;
+ break;
case 0x09:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - BUSY\n"));
break;
case 0x0A:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - DME_FAILURE\n"));
- break;
+ break;
default :
ASSERT (FALSE);
break;
@@ -125,7 +125,7 @@ DumpUicCmdExecResult ( break;
case 0x01:
DEBUG ((EFI_D_VERBOSE, "UIC control command fails - FAILURE\n"));
- break;
+ break;
default :
ASSERT (FALSE);
break;
@@ -171,7 +171,7 @@ DumpQueryResponseResult ( break;
case 0xFE:
DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Opcode\n"));
- break;
+ break;
case 0xFF:
DEBUG ((EFI_D_VERBOSE, "Query Response with General Failure\n"));
break;
@@ -243,7 +243,7 @@ UfsFillTsfOfQueryReqUpiu ( SwapLittleEndianToBigEndian ((UINT8*)&Length, sizeof (Length));
TsfBase->Length = Length;
}
-
+
if (Opcode == UtpQueryFuncOpcodeWrAttr) {
SwapLittleEndianToBigEndian ((UINT8*)&Value, sizeof (Value));
TsfBase->Value = Value;
@@ -731,7 +731,7 @@ VOID UfsStartExecCmd (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 Slot
- )
+ )
{
UINTN UfsHcBase;
UINTN Address;
@@ -739,7 +739,7 @@ UfsStartExecCmd ( UfsHcBase = Private->UfsHcBase;
- Address = UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
+ Address = UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
Data = MmioRead32 (Address);
if ((Data & UFS_HC_UTRLRSR) != UFS_HC_UTRLRSR) {
MmioWrite32 (Address, UFS_HC_UTRLRSR);
@@ -760,7 +760,7 @@ VOID UfsStopExecCmd (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 Slot
- )
+ )
{
UINTN UfsHcBase;
UINTN Address;
@@ -768,10 +768,10 @@ UfsStopExecCmd ( UfsHcBase = Private->UfsHcBase;
- Address = UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
+ Address = UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Data = MmioRead32 (Address);
if ((Data & (BIT0 << Slot)) != 0) {
- Address = UfsHcBase + UFS_HC_UTRLCLR_OFFSET;
+ Address = UfsHcBase + UFS_HC_UTRLCLR_OFFSET;
Data = MmioRead32 (Address);
MmioWrite32 (Address, (Data & ~(BIT0 << Slot)));
}
@@ -839,7 +839,7 @@ UfsRwDeviceDesc ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
//
// Fill transfer request descriptor to this slot.
@@ -863,8 +863,8 @@ UfsRwDeviceDesc ( //
// Wait for the completion of the transfer request.
- //
- Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
+ //
+ Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0 << Slot, 0, Packet.Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
@@ -953,7 +953,7 @@ UfsRwAttributes ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
//
// Fill transfer request descriptor to this slot.
@@ -977,8 +977,8 @@ UfsRwAttributes ( //
// Wait for the completion of the transfer request.
- //
- Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
+ //
+ Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0 << Slot, 0, Packet.Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
@@ -1091,8 +1091,8 @@ UfsRwFlags ( //
// Wait for the completion of the transfer request.
- //
- Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
+ //
+ Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0 << Slot, 0, Packet.Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
@@ -1249,8 +1249,8 @@ UfsExecNopCmds ( //
// Wait for the completion of the transfer request.
- //
- Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
+ //
+ Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0 << Slot, 0, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
goto Exit;
@@ -1335,8 +1335,8 @@ UfsExecScsiCmds ( //
// Wait for the completion of the transfer request.
- //
- Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
+ //
+ Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0 << Slot, 0, Packet->Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
@@ -1348,7 +1348,7 @@ UfsExecScsiCmds ( Response = (UTP_RESPONSE_UPIU*)(CmdDescBase + Trd->RuO * sizeof (UINT32));
SenseDataLen = Response->SenseDataLen;
SwapLittleEndianToBigEndian ((UINT8*)&SenseDataLen, sizeof (UINT16));
-
+
if ((Packet->SenseDataLength != 0) && (Packet->SenseData != NULL)) {
CopyMem (Packet->SenseData, Response->SenseData, SenseDataLen);
Packet->SenseDataLength = (UINT8)SenseDataLen;
@@ -1458,7 +1458,7 @@ UfsExecUicCommands ( //
// UFS 2.0 spec section 5.3.1 Offset:0x20 IS.Bit10 UIC Command Completion Status (UCCS)
- // This bit is set to '1' by the host controller upon completion of a UIC command.
+ // This bit is set to '1' by the host controller upon completion of a UIC command.
//
Address = UfsHcBase + UFS_HC_IS_OFFSET;
Data = MmioRead32 (Address);
@@ -1481,7 +1481,7 @@ UfsExecUicCommands ( //
// Check value of HCS.DP and make sure that there is a device attached to the Link.
//
- Address = UfsHcBase + UFS_HC_STATUS_OFFSET;
+ Address = UfsHcBase + UFS_HC_STATUS_OFFSET;
Data = MmioRead32 (Address);
if ((Data & UFS_HC_HCS_DP) == 0) {
Address = UfsHcBase + UFS_HC_IS_OFFSET;
@@ -1614,11 +1614,11 @@ UfsInitTaskManagementRequestList ( EFI_PHYSICAL_ADDRESS CmdDescPhyAddr;
VOID *CmdDescMapping;
EFI_STATUS Status;
-
+
//
// Initial h/w and s/w context for future operations.
//
- Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;
Data = MmioRead32 (Address);
Private->Capabilities = Data;
@@ -1642,9 +1642,9 @@ UfsInitTaskManagementRequestList ( // Program the UTP Task Management Request List Base Address and UTP Task Management
// Request List Base Address with a 64-bit address allocated at step 6.
//
- Address = Private->UfsHcBase + UFS_HC_UTMRLBA_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTMRLBA_OFFSET;
MmioWrite32 (Address, (UINT32)(UINTN)CmdDescPhyAddr);
- Address = Private->UfsHcBase + UFS_HC_UTMRLBAU_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTMRLBAU_OFFSET;
MmioWrite32 (Address, (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 32));
Private->UtpTmrlBase = (VOID*)(UINTN)CmdDescHost;
Private->Nutmrs = Nutmrs;
@@ -1654,7 +1654,7 @@ UfsInitTaskManagementRequestList ( // Enable the UTP Task Management Request List by setting the UTP Task Management
// Request List RunStop Register (UTMRLRSR) to '1'.
//
- Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;
MmioWrite32 (Address, UFS_HC_UTMRLRSR);
return EFI_SUCCESS;
@@ -1681,11 +1681,11 @@ UfsInitTransferRequestList ( EFI_PHYSICAL_ADDRESS CmdDescPhyAddr;
VOID *CmdDescMapping;
EFI_STATUS Status;
-
+
//
// Initial h/w and s/w context for future operations.
//
- Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;
Data = MmioRead32 (Address);
Private->Capabilities = Data;
@@ -1709,19 +1709,19 @@ UfsInitTransferRequestList ( // Program the UTP Transfer Request List Base Address and UTP Transfer Request List
// Base Address with a 64-bit address allocated at step 8.
//
- Address = Private->UfsHcBase + UFS_HC_UTRLBA_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTRLBA_OFFSET;
MmioWrite32 (Address, (UINT32)(UINTN)CmdDescPhyAddr);
- Address = Private->UfsHcBase + UFS_HC_UTRLBAU_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTRLBAU_OFFSET;
MmioWrite32 (Address, (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 32));
Private->UtpTrlBase = (VOID*)(UINTN)CmdDescHost;
Private->Nutrs = Nutrs;
Private->TrlMapping = CmdDescMapping;
-
+
//
// Enable the UTP Transfer Request List by setting the UTP Transfer Request List
// RunStop Register (UTRLRSR) to '1'.
//
- Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
MmioWrite32 (Address, UFS_HC_UTRLRSR);
return EFI_SUCCESS;
@@ -1803,14 +1803,14 @@ UfsControllerStop ( // Enable the UTP Task Management Request List by setting the UTP Task Management
// Request List RunStop Register (UTMRLRSR) to '1'.
//
- Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;
MmioWrite32 (Address, 0);
//
// Enable the UTP Transfer Request List by setting the UTP Transfer Request List
// RunStop Register (UTRLRSR) to '1'.
//
- Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
+ Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
MmioWrite32 (Address, 0);
//
diff --git a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.h b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.h index 0a0cf71..69fae95 100644 --- a/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.h +++ b/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.h @@ -2,7 +2,7 @@ UfsPassThruDxe driver is used to produce EFI_EXT_SCSI_PASS_THRU protocol interface
for upper layer application to execute UFS-supported SCSI cmds.
- Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -153,7 +153,7 @@ typedef struct { // UFSHCI 2.0 Spec Section 5.2.5 Offset 18h: AHIT - Auto-Hibernate Idle Timer
//
typedef struct {
- UINT32 Ahitv:10; // Auto-Hibernate Idle Timer Value
+ UINT32 Ahitv:10; // Auto-Hibernate Idle Timer Value
UINT32 Ts:3; // Timer scale
UINT32 Rsvd1:19;
} UFS_HC_AHIT;
@@ -165,19 +165,19 @@ typedef struct { UINT16 Utrcs:1; // UTP Transfer Request Completion Status
UINT16 Udepri:1; // UIC DME_ENDPOINT_RESET Indication
UINT16 Ue:1; // UIC Error
- UINT16 Utms:1; // UIC Test Mode Status
+ UINT16 Utms:1; // UIC Test Mode Status
- UINT16 Upms:1; // UIC Power Mode Status
- UINT16 Uhxs:1; // UIC Hibernate Exit Status
- UINT16 Uhes:1; // UIC Hibernate Enter Status
- UINT16 Ulls:1; // UIC Link Lost Status
+ UINT16 Upms:1; // UIC Power Mode Status
+ UINT16 Uhxs:1; // UIC Hibernate Exit Status
+ UINT16 Uhes:1; // UIC Hibernate Enter Status
+ UINT16 Ulls:1; // UIC Link Lost Status
- UINT16 Ulss:1; // UIC Link Startup Status
- UINT16 Utmrcs:1; // UTP Task Management Request Completion Status
- UINT16 Uccs:1; // UIC Command Completion Status
- UINT16 Dfes:1; // Device Fatal Error Status
+ UINT16 Ulss:1; // UIC Link Startup Status
+ UINT16 Utmrcs:1; // UTP Task Management Request Completion Status
+ UINT16 Uccs:1; // UIC Command Completion Status
+ UINT16 Dfes:1; // Device Fatal Error Status
- UINT16 Utpes:1; // UTP Error Status
+ UINT16 Utpes:1; // UTP Error Status
UINT16 Rsvd1:3;
UINT16 Hcfes:1; // Host Controller Fatal Error Status
@@ -194,9 +194,9 @@ typedef struct { UINT16 Uee:1; // UIC Error Enable
UINT16 Utmse:1; // UIC Test Mode Status Enable
- UINT16 Upmse:1; // UIC Power Mode Status Enable
+ UINT16 Upmse:1; // UIC Power Mode Status Enable
UINT16 Uhxse:1; // UIC Hibernate Exit Status Enable
- UINT16 Uhese:1; // UIC Hibernate Enter Status Enable
+ UINT16 Uhese:1; // UIC Hibernate Enter Status Enable
UINT16 Ullse:1; // UIC Link Lost Status Enable
UINT16 Ulsse:1; // UIC Link Startup Status Enable
@@ -450,22 +450,22 @@ typedef struct { //
UINT32 Rsvd6:7;
UINT32 UcdBa:25; /* UTP Command Descriptor Base Address */
-
+
//
// DW5
//
UINT32 UcdBaU; /* UTP Command Descriptor Base Address Upper 32-bits */
-
+
//
// DW6
//
- UINT16 RuL; /* Response UPIU Length */
+ UINT16 RuL; /* Response UPIU Length */
UINT16 RuO; /* Response UPIU Offset */
//
// DW7
//
- UINT16 PrdtL; /* PRDT Length */
+ UINT16 PrdtL; /* PRDT Length */
UINT16 PrdtO; /* PRDT Offset */
} UTP_TRD;
@@ -475,12 +475,12 @@ typedef struct { //
UINT32 Rsvd1:2;
UINT32 DbAddr:30; /* Data Base Address */
-
+
//
// DW1
//
UINT32 DbAddrU; /* Data Base Address Upper 32-bits */
-
+
//
// DW2
//
@@ -846,7 +846,7 @@ typedef struct { // DW4 - DW11
//
UTP_TM_REQ_UPIU TmReq; /* Task Management Request UPIU */
-
+
//
// DW12 - DW19
//
@@ -972,7 +972,7 @@ typedef struct { typedef enum {
UfsUtpQueryResponseSuccess = 0x00,
UfsUtpQueryResponseParamNotReadable = 0xF6,
- UfsUtpQueryResponseParamNotWriteable = 0xF7,
+ UfsUtpQueryResponseParamNotWriteable = 0xF7,
UfsUtpQueryResponseParamAlreadyWritten = 0xF8,
UfsUtpQueryResponseInvalidLen = 0xF9,
UfsUtpQueryResponseInvalidVal = 0xFA,
@@ -1305,7 +1305,7 @@ typedef enum { UfsFlagPurgeEn = 0x06,
UfsFlagPhyResRemoval = 0x08,
UfsFlagBusyRtc = 0x09,
- UfsFlagPermDisFwUpdate = 0x0B
+ UfsFlagPermDisFwUpdate = 0x0B
} UFS_FLAGS_IDN;
//
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/ComponentName.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/ComponentName.c index 7da2111..35ead36 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/ComponentName.c +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/ComponentName.c @@ -1,13 +1,13 @@ /** @file
- Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "UfsPassThru.h"
@@ -32,18 +32,18 @@ GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gUfsPassThruComponent GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mUfsPassThruDriverNameTable[] = {
- {
+ {
"eng;en",
L"Universal Flash Storage (UFS) Pass Thru Driver"
},
- {
+ {
NULL,
NULL
}
};
GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mUfsPassThruControllerNameTable[] = {
- {
+ {
"eng;en",
L"Universal Flash Storage (UFS) Host Controller"
},
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c index e24eb40..ea32961 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c @@ -1,6 +1,6 @@ /** @file
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -18,7 +18,7 @@ //
UFS_PASS_THRU_PRIVATE_DATA gUfsPassThruTemplate = {
UFS_PASS_THRU_SIG, // Signature
- NULL, // Handle
+ NULL, // Handle
{ // ExtScsiPassThruMode
0xFFFFFFFF,
EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO,
@@ -209,7 +209,7 @@ UfsPassThruPassThru ( if ((Private->Luns.BitMask & (BIT0 << Index)) == 0) {
continue;
}
-
+
if (Private->Luns.Lun[Index] == UfsLun) {
break;
}
@@ -413,7 +413,7 @@ UfsPassThruBuildDevicePath ( if ((Private->Luns.BitMask & (BIT0 << Index)) == 0) {
continue;
}
-
+
if (Private->Luns.Lun[Index] == UfsLun) {
break;
}
@@ -504,7 +504,7 @@ UfsPassThruGetTargetLun ( if ((Private->Luns.BitMask & (BIT0 << Index)) == 0) {
continue;
}
-
+
if (Private->Luns.Lun[Index] == UfsLun) {
break;
}
@@ -730,7 +730,7 @@ UfsPassThruDriverBindingSupported ( This->DriverBindingHandle,
Controller
);
-
+
return EFI_SUCCESS;
}
@@ -883,8 +883,8 @@ UfsPassThruDriverBindingStart ( //
// UFS 2.0 spec Section 13.1.3.3:
- // At the end of the UFS Interconnect Layer initialization on both host and device side,
- // the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
+ // At the end of the UFS Interconnect Layer initialization on both host and device side,
+ // the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
//
Status = UfsExecNopCmds (Private);
if (EFI_ERROR (Status)) {
@@ -955,7 +955,7 @@ UfsPassThruDriverBindingStart ( Error:
if (Private != NULL) {
if (Private->TmrlMapping != NULL) {
- UfsHc->Unmap (UfsHc, Private->TmrlMapping);
+ UfsHc->Unmap (UfsHc, Private->TmrlMapping);
}
if (Private->UtpTmrlBase != NULL) {
UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (Private->Nutmrs * sizeof (UTP_TMRD)), Private->UtpTmrlBase);
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h index 6c71983..b893784 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h @@ -1,6 +1,6 @@ /** @file
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -35,7 +35,7 @@ #define UFS_PASS_THRU_SIG SIGNATURE_32 ('U', 'F', 'S', 'P')
//
-// Lun 0~7 is for 8 common luns.
+// Lun 0~7 is for 8 common luns.
// Lun 8~11 is for those 4 well known luns (Refer to UFS 2.0 spec Table 10.58 for details):
// Lun 8: REPORT LUNS
// Lun 9: UFS DEVICE
@@ -59,7 +59,7 @@ typedef struct { for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\
Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink)
-typedef struct _UFS_PASS_THRU_PRIVATE_DATA {
+typedef struct _UFS_PASS_THRU_PRIVATE_DATA {
UINT32 Signature;
EFI_HANDLE Handle;
EFI_EXT_SCSI_PASS_THRU_MODE ExtScsiPassThruMode;
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.uni b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.uni index 85c16c1..1addc23 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.uni +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.uni @@ -1,16 +1,16 @@ // /** @file
-// The UfsPassThruDxe driver is used to provide support on accessing UFS device.
+// The UfsPassThruDxe driver is used to provide support on accessing UFS device.
//
// It produces an EFI_EXT_SCSI_PASS_THRU_PROTOCOL interface for upper layer to send
// SCSI cmd to UFS device.
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruDxe.inf b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruDxe.inf index 467c533..93b6424 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruDxe.inf +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruDxe.inf @@ -1,7 +1,7 @@ ## @file
# Description file for the Universal Flash Storage (UFS) Pass Thru driver.
#
-# Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -28,8 +28,8 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
-# DRIVER_BINDING = gUfsPassThruDriverBinding
-# COMPONENT_NAME = gUfsPassThruComponentName
+# DRIVER_BINDING = gUfsPassThruDriverBinding
+# COMPONENT_NAME = gUfsPassThruComponentName
#
[Sources]
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruExtra.uni b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruExtra.uni index 4f188f0..2c8bd01 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruExtra.uni +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UfsPassThruDxe Localized Strings and Content
//
-// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"UFS PassThru UEFI Driver"
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c index 4b7df74..e868c8c 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c @@ -2,7 +2,7 @@ UfsPassThruDxe driver is used to produce EFI_EXT_SCSI_PASS_THRU protocol interface
for upper layer application to execute UFS-supported SCSI cmds.
- Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -179,13 +179,13 @@ DumpUicCmdExecResult ( break;
case 0x08:
DEBUG ((DEBUG_VERBOSE, "UIC configuration command fails - PEER_COMMUNICATION_FAILURE\n"));
- break;
+ break;
case 0x09:
DEBUG ((DEBUG_VERBOSE, "UIC configuration command fails - BUSY\n"));
break;
case 0x0A:
DEBUG ((DEBUG_VERBOSE, "UIC configuration command fails - DME_FAILURE\n"));
- break;
+ break;
default :
ASSERT (FALSE);
break;
@@ -196,7 +196,7 @@ DumpUicCmdExecResult ( break;
case 0x01:
DEBUG ((DEBUG_VERBOSE, "UIC control command fails - FAILURE\n"));
- break;
+ break;
default :
ASSERT (FALSE);
break;
@@ -242,7 +242,7 @@ DumpQueryResponseResult ( break;
case 0xFE:
DEBUG ((DEBUG_VERBOSE, "Query Response with Invalid Opcode\n"));
- break;
+ break;
case 0xFF:
DEBUG ((DEBUG_VERBOSE, "Query Response with General Failure\n"));
break;
@@ -314,7 +314,7 @@ UfsFillTsfOfQueryReqUpiu ( SwapLittleEndianToBigEndian ((UINT8*)&Length, sizeof (Length));
TsfBase->Length = Length;
}
-
+
if (Opcode == UtpQueryFuncOpcodeWrAttr) {
SwapLittleEndianToBigEndian ((UINT8*)&Value, sizeof (Value));
TsfBase->Value = Value;
@@ -790,7 +790,7 @@ EFI_STATUS UfsStartExecCmd (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN UINT8 Slot
- )
+ )
{
UINT32 Data;
EFI_STATUS Status;
@@ -826,7 +826,7 @@ EFI_STATUS UfsStopExecCmd (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN UINT8 Slot
- )
+ )
{
UINT32 Data;
EFI_STATUS Status;
@@ -940,7 +940,7 @@ UfsSendDmRequestRetry ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
//
// Fill transfer request descriptor to this slot.
@@ -1337,7 +1337,7 @@ UfsExecNopCmds ( //
// Wait for the completion of the transfer request.
- //
+ //
Status = UfsWaitMemSet (Private, UFS_HC_UTRLDBR_OFFSET, BIT0 << Slot, 0, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
goto Exit;
@@ -1503,7 +1503,7 @@ UfsExecScsiCmds ( //
// Wait for the completion of the transfer request.
- //
+ //
Status = UfsWaitMemSet (Private, UFS_HC_UTRLDBR_OFFSET, BIT0 << TransReq->Slot, 0, Packet->Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
@@ -1516,7 +1516,7 @@ UfsExecScsiCmds ( ASSERT (Response != NULL);
SenseDataLen = Response->SenseDataLen;
SwapLittleEndianToBigEndian ((UINT8*)&SenseDataLen, sizeof (UINT16));
-
+
if ((Packet->SenseDataLength != 0) && (Packet->SenseData != NULL)) {
CopyMem (Packet->SenseData, Response->SenseData, SenseDataLen);
Packet->SenseDataLength = (UINT8)SenseDataLen;
@@ -1649,7 +1649,7 @@ UfsExecUicCommands ( //
// UFS 2.0 spec section 5.3.1 Offset:0x20 IS.Bit10 UIC Command Completion Status (UCCS)
- // This bit is set to '1' by the host controller upon completion of a UIC command.
+ // This bit is set to '1' by the host controller upon completion of a UIC command.
//
Status = UfsWaitMemSet (Private, UFS_HC_IS_OFFSET, UFS_HC_IS_UCCS, UFS_HC_IS_UCCS, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
@@ -1907,7 +1907,7 @@ UfsInitTaskManagementRequestList ( EFI_PHYSICAL_ADDRESS CmdDescPhyAddr;
VOID *CmdDescMapping;
EFI_STATUS Status;
-
+
//
// Initial h/w and s/w context for future operations.
//
@@ -1978,7 +1978,7 @@ UfsInitTransferRequestList ( UINT8 Nutrs;
VOID *CmdDescHost;
EFI_PHYSICAL_ADDRESS CmdDescPhyAddr;
- VOID *CmdDescMapping;
+ VOID *CmdDescMapping;
EFI_STATUS Status;
//
@@ -2019,7 +2019,7 @@ UfsInitTransferRequestList ( }
Private->UtpTrlBase = CmdDescHost;
- Private->Nutrs = Nutrs;
+ Private->Nutrs = Nutrs;
Private->TrlMapping = CmdDescMapping;
//
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.h b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.h index 0a0cf71..69fae95 100644 --- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.h +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.h @@ -2,7 +2,7 @@ UfsPassThruDxe driver is used to produce EFI_EXT_SCSI_PASS_THRU protocol interface
for upper layer application to execute UFS-supported SCSI cmds.
- Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -153,7 +153,7 @@ typedef struct { // UFSHCI 2.0 Spec Section 5.2.5 Offset 18h: AHIT - Auto-Hibernate Idle Timer
//
typedef struct {
- UINT32 Ahitv:10; // Auto-Hibernate Idle Timer Value
+ UINT32 Ahitv:10; // Auto-Hibernate Idle Timer Value
UINT32 Ts:3; // Timer scale
UINT32 Rsvd1:19;
} UFS_HC_AHIT;
@@ -165,19 +165,19 @@ typedef struct { UINT16 Utrcs:1; // UTP Transfer Request Completion Status
UINT16 Udepri:1; // UIC DME_ENDPOINT_RESET Indication
UINT16 Ue:1; // UIC Error
- UINT16 Utms:1; // UIC Test Mode Status
+ UINT16 Utms:1; // UIC Test Mode Status
- UINT16 Upms:1; // UIC Power Mode Status
- UINT16 Uhxs:1; // UIC Hibernate Exit Status
- UINT16 Uhes:1; // UIC Hibernate Enter Status
- UINT16 Ulls:1; // UIC Link Lost Status
+ UINT16 Upms:1; // UIC Power Mode Status
+ UINT16 Uhxs:1; // UIC Hibernate Exit Status
+ UINT16 Uhes:1; // UIC Hibernate Enter Status
+ UINT16 Ulls:1; // UIC Link Lost Status
- UINT16 Ulss:1; // UIC Link Startup Status
- UINT16 Utmrcs:1; // UTP Task Management Request Completion Status
- UINT16 Uccs:1; // UIC Command Completion Status
- UINT16 Dfes:1; // Device Fatal Error Status
+ UINT16 Ulss:1; // UIC Link Startup Status
+ UINT16 Utmrcs:1; // UTP Task Management Request Completion Status
+ UINT16 Uccs:1; // UIC Command Completion Status
+ UINT16 Dfes:1; // Device Fatal Error Status
- UINT16 Utpes:1; // UTP Error Status
+ UINT16 Utpes:1; // UTP Error Status
UINT16 Rsvd1:3;
UINT16 Hcfes:1; // Host Controller Fatal Error Status
@@ -194,9 +194,9 @@ typedef struct { UINT16 Uee:1; // UIC Error Enable
UINT16 Utmse:1; // UIC Test Mode Status Enable
- UINT16 Upmse:1; // UIC Power Mode Status Enable
+ UINT16 Upmse:1; // UIC Power Mode Status Enable
UINT16 Uhxse:1; // UIC Hibernate Exit Status Enable
- UINT16 Uhese:1; // UIC Hibernate Enter Status Enable
+ UINT16 Uhese:1; // UIC Hibernate Enter Status Enable
UINT16 Ullse:1; // UIC Link Lost Status Enable
UINT16 Ulsse:1; // UIC Link Startup Status Enable
@@ -450,22 +450,22 @@ typedef struct { //
UINT32 Rsvd6:7;
UINT32 UcdBa:25; /* UTP Command Descriptor Base Address */
-
+
//
// DW5
//
UINT32 UcdBaU; /* UTP Command Descriptor Base Address Upper 32-bits */
-
+
//
// DW6
//
- UINT16 RuL; /* Response UPIU Length */
+ UINT16 RuL; /* Response UPIU Length */
UINT16 RuO; /* Response UPIU Offset */
//
// DW7
//
- UINT16 PrdtL; /* PRDT Length */
+ UINT16 PrdtL; /* PRDT Length */
UINT16 PrdtO; /* PRDT Offset */
} UTP_TRD;
@@ -475,12 +475,12 @@ typedef struct { //
UINT32 Rsvd1:2;
UINT32 DbAddr:30; /* Data Base Address */
-
+
//
// DW1
//
UINT32 DbAddrU; /* Data Base Address Upper 32-bits */
-
+
//
// DW2
//
@@ -846,7 +846,7 @@ typedef struct { // DW4 - DW11
//
UTP_TM_REQ_UPIU TmReq; /* Task Management Request UPIU */
-
+
//
// DW12 - DW19
//
@@ -972,7 +972,7 @@ typedef struct { typedef enum {
UfsUtpQueryResponseSuccess = 0x00,
UfsUtpQueryResponseParamNotReadable = 0xF6,
- UfsUtpQueryResponseParamNotWriteable = 0xF7,
+ UfsUtpQueryResponseParamNotWriteable = 0xF7,
UfsUtpQueryResponseParamAlreadyWritten = 0xF8,
UfsUtpQueryResponseInvalidLen = 0xF9,
UfsUtpQueryResponseInvalidVal = 0xFA,
@@ -1305,7 +1305,7 @@ typedef enum { UfsFlagPurgeEn = 0x06,
UfsFlagPhyResRemoval = 0x08,
UfsFlagBusyRtc = 0x09,
- UfsFlagPermDisFwUpdate = 0x0B
+ UfsFlagPermDisFwUpdate = 0x0B
} UFS_FLAGS_IDN;
//
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.c b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.c index 55c4a53..e483660 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.c +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.c @@ -1,8 +1,8 @@ /** @file
BOT Transportation implementation.
-Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.h b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.h index 07235c3..8127556 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.h +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/BotPeim.h @@ -1,8 +1,8 @@ /** @file
BOT Transportation implementation.
-Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -173,7 +173,7 @@ PeiUsbRead10 ( IN UINTN NumberOfBlocks
);
-/**
+/**
Check if there is media according to sense data.
@param SenseData Pointer to sense data.
@@ -189,7 +189,7 @@ IsNoMedia ( IN UINTN SenseCounts
);
-/**
+/**
Check if there is media error according to sense data.
@param SenseData Pointer to sense data.
@@ -205,7 +205,7 @@ IsMediaError ( IN UINTN SenseCounts
);
-/**
+/**
Check if media is changed according to sense data.
@param SenseData Pointer to sense data.
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c index 72bde75..6873350 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c @@ -1,8 +1,8 @@ /** @file
Pei USB ATATPI command implementations.
-Copyright (c) 1999 - 2017, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -475,7 +475,7 @@ PeiUsbRead10 ( return Status;
}
-/**
+/**
Check if there is media according to sense data.
@param SenseData Pointer to sense data.
@@ -526,7 +526,7 @@ IsNoMedia ( return NoMedia;
}
-/**
+/**
Check if there is media error according to sense data.
@param SenseData Pointer to sense data.
@@ -603,7 +603,7 @@ IsMediaError ( return Error;
}
-/**
+/**
Check if media is changed according to sense data.
@param SenseData Pointer to sense data.
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.c b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.c index 46c1a06..4f20c71 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.c +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.c @@ -1,8 +1,8 @@ /** @file
Common Libarary for PEI USB.
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.h b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.h index eafccfd..6d39b76 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.h +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiUsbLib.h @@ -1,8 +1,8 @@ /** @file
Common Libarary for PEI USB.
-Copyright (c) 1999 - 2010, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -34,7 +34,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #define USB_DEV_SET_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device
#define USB_DEV_SET_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface
#define USB_DEV_SET_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint
-
+
#define USB_DEV_SET_ADDRESS 0x05
#define USB_DEV_SET_ADDRESS_REQ_TYPE 0x00
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.uni b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.uni index 30d49d5..2477a14 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.uni +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.uni @@ -3,14 +3,14 @@ //
// The USB mass storage device PEIM driver is used to support recovery from USB devices.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeiExtra.uni b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeiExtra.uni index 3e6eb63..402a6ee 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeiExtra.uni +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UsbBotPei Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
@@ -14,8 +14,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"USB PEI Module for Recovery"
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.c b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.c index 5e18306..d53727d 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.c +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.c @@ -1,7 +1,7 @@ /** @file
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -69,8 +69,8 @@ PeiBotDetectMedia ( );
/**
- Initializes the Usb Bot.
-
+ Initializes the Usb Bot.
+
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@@ -119,8 +119,8 @@ PeimInitializeUsbBot ( }
/**
- UsbIo installation notification function.
-
+ UsbIo installation notification function.
+
This function finds out all the current USB IO PPIs in the system and add them
into private data.
@@ -292,16 +292,16 @@ InitUsbBot ( /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -326,27 +326,27 @@ BotGetNumberOfBlockDevices ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
-
- @retval EFI_SUCCESS Media information about the specified block device
+
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -393,31 +393,31 @@ BotGetMediaInfo ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
-
+
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.h b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.h index 3ae8c67..692147e 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.h +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPeim.h @@ -1,8 +1,8 @@ /** @file
Usb BOT Peim definition.
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -34,16 +34,16 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. /**
Gets the count of block I/O devices that one specific block driver detects.
- This function is used for getting the count of block I/O devices that one
+ This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
- of all the detected ATAPI devices it detects during the enumeration process.
- To the PEI legacy floppy driver, it returns the number of all the legacy
- devices it finds during its enumeration process. If no device is detected,
- then the function will return zero.
-
- @param[in] PeiServices General-purpose services that are available
+ of all the detected ATAPI devices it detects during the enumeration process.
+ To the PEI legacy floppy driver, it returns the number of all the legacy
+ devices it finds during its enumeration process. If no device is detected,
+ then the function will return zero.
+
+ @param[in] PeiServices General-purpose services that are available
to every PEIM.
- @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
+ @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -61,27 +61,27 @@ BotGetNumberOfBlockDevices ( /**
Gets a block device's media information.
- This function will provide the caller with the specified block device's media
- information. If the media changes, calling this function will update the media
+ This function will provide the caller with the specified block device's media
+ information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the
device index that was assigned during the enumeration
- process. This index is a number from one to
+ process. This index is a number from one to
NumberBlockDevices.
- @param[out] MediaInfo The media information of the specified block media.
- The caller is responsible for the ownership of this
+ @param[out] MediaInfo The media information of the specified block media.
+ The caller is responsible for the ownership of this
data structure.
- @retval EFI_SUCCESS Media information about the specified block device
+ @retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
- @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
+ @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -97,31 +97,31 @@ BotGetMediaInfo ( /**
Reads the requested number of blocks from the specified block device.
- The function reads the requested number of blocks from the device. All the
+ The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
- @param[in] PeiServices General-purpose services that are available to
+ @param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
- @param[in] DeviceIndex Specifies the block device to which the function wants
- to talk. Because the driver that implements Block I/O
- PPIs will manage multiple block devices, the PPIs that
- want to talk to a single device must specify the device
- index that was assigned during the enumeration process.
+ @param[in] DeviceIndex Specifies the block device to which the function wants
+ to talk. Because the driver that implements Block I/O
+ PPIs will manage multiple block devices, the PPIs that
+ want to talk to a single device must specify the device
+ index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
- The caller is responsible for the ownership of the
+ The caller is responsible for the ownership of the
buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while attempting
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbPeim.h b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbPeim.h index c62b99d..ec2c4ff 100644 --- a/MdeModulePkg/Bus/Usb/UsbBotPei/UsbPeim.h +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/UsbPeim.h @@ -1,8 +1,8 @@ /** @file
Usb Peim definition.
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c index 7c58fe8..26821c2 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c @@ -2,7 +2,7 @@ Usb Bus Driver Binding and Bus IO Protocol.
-Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -862,7 +862,7 @@ UsbIoPortReset ( Dev->Address = DevAddress;
gBS->Stall (USB_SET_DEVICE_ADDRESS_STALL);
-
+
if (EFI_ERROR (Status)) {
//
// It may fail due to device disconnection or other reasons.
@@ -1036,7 +1036,7 @@ UsbBusBuildProtocol ( RootIf->Signature = USB_INTERFACE_SIGNATURE;
RootIf->Device = RootHub;
RootIf->DevicePath = UsbBus->DevicePath;
-
+
//
// Report Status Code here since we will enumerate the USB devices
//
@@ -1045,7 +1045,7 @@ UsbBusBuildProtocol ( (EFI_IO_BUS_USB | EFI_IOB_PC_DETECT),
UsbBus->DevicePath
);
-
+
Status = mUsbRootHubApi.Init (RootIf);
if (EFI_ERROR (Status)) {
@@ -1157,7 +1157,7 @@ UsbBusControllerDriverSupported ( //
if (RemainingDevicePath != NULL) {
//
- // Check if RemainingDevicePath is the End of Device Path Node,
+ // Check if RemainingDevicePath is the End of Device Path Node,
// if yes, go on checking other conditions
//
if (!IsDevicePathEnd (RemainingDevicePath)) {
@@ -1166,13 +1166,13 @@ UsbBusControllerDriverSupported ( // check its validation
//
DevicePathNode.DevPath = RemainingDevicePath;
-
+
if ((DevicePathNode.DevPath->Type != MESSAGING_DEVICE_PATH) ||
(DevicePathNode.DevPath->SubType != MSG_USB_DP &&
DevicePathNode.DevPath->SubType != MSG_USB_CLASS_DP
&& DevicePathNode.DevPath->SubType != MSG_USB_WWID_DP
)) {
-
+
return EFI_UNSUPPORTED;
}
}
@@ -1208,7 +1208,7 @@ UsbBusControllerDriverSupported ( if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
-
+
if (EFI_ERROR (Status)) {
return Status;
}
@@ -1235,7 +1235,7 @@ UsbBusControllerDriverSupported ( Controller
);
}
-
+
//
// Open the EFI Device Path protocol needed to perform the supported test
//
@@ -1362,7 +1362,7 @@ UsbBusControllerDriverStart ( //
// If RemainingDevicePath is the End of Device Path Node,
// skip enumerate any device and return EFI_SUCESSS
- //
+ //
return EFI_SUCCESS;
}
}
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.h b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.h index 9ede83a..be82e25 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.h +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.h @@ -2,7 +2,7 @@ Usb Bus Driver Binding and Bus IO Protocol.
-Copyright (c) 2004 - 2012, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -123,7 +123,7 @@ typedef struct _USB_HUB_API USB_HUB_API; //
// Send general device request timeout.
-//
+//
// The USB Specification 2.0, section 11.24.1 recommends a value of
// 50 milliseconds. We use a value of 500 milliseconds to work
// around slower hubs and devices.
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf index b7b30cc..30d59ad 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf @@ -1,7 +1,7 @@ ## @file
# The Usb Bus Dxe driver is used to enumerate and manage all attached usb devices.
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -29,7 +29,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC ARM AARCH64
#
-# DRIVER_BINDING = mUsbBusDriverBinding
+# DRIVER_BINDING = mUsbBusDriverBinding
# COMPONENT_NAME = mUsbBusComponentName
# COMPONENT_NAME2 = mUsbBusComponentName2
#
@@ -66,7 +66,7 @@ gEfiUsbIoProtocolGuid ## BY_START
## TO_START
## BY_START
- gEfiDevicePathProtocolGuid
+ gEfiDevicePathProtocolGuid
gEfiUsb2HcProtocolGuid ## TO_START
gEfiUsbHcProtocolGuid ## TO_START
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.uni b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.uni index f147a0d..1339fb1 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.uni +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.uni @@ -3,13 +3,13 @@ //
// The USB Bus DXE driver is used to enumerate and manage all attached USB devices.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxeExtra.uni b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxeExtra.uni index 6b92980..c625654 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxeExtra.uni +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UsbBusDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"USB Bus DXE Driver"
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c index fba60da..061e462 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c @@ -2,7 +2,7 @@ Manage Usb Descriptor List
-Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -361,7 +361,7 @@ UsbParseConfigDesc ( Len -= Consumed;
//
- // Make allowances for devices that return extra data at the
+ // Make allowances for devices that return extra data at the
// end of their config descriptors
//
while (Len >= sizeof (EFI_USB_INTERFACE_DESCRIPTOR)) {
@@ -689,7 +689,7 @@ UsbBuildLangTable ( Max = (Desc->Length - 2) / 2;
Max = MIN(Max, USB_MAX_LANG_ID);
-
+
Point = Desc->String;
for (Index = 0; Index < Max; Index++) {
UsbDev->LangId[Index] = *Point;
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c index 62645d9..13edbee 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c @@ -2,7 +2,7 @@ Usb bus enumeration support.
-Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -33,9 +33,9 @@ UsbGetEndpointDesc ( USB_ENDPOINT_DESC *EpDesc;
UINT8 Index;
UINT8 NumEndpoints;
-
+
NumEndpoints = UsbIf->IfSetting->Desc.NumEndpoints;
-
+
for (Index = 0; Index < NumEndpoints; Index++) {
EpDesc = UsbIf->IfSetting->Endpoints[Index];
@@ -279,7 +279,7 @@ UsbConnectDriver ( // twisted TPL used. It should be no problem for us to connect
// or disconnect at CALLBACK.
//
-
+
//
// Only recursively wanted usb child device
//
@@ -493,13 +493,13 @@ UsbDisconnectDriver ( if (!EFI_ERROR (Status)) {
UsbIf->IsManaged = FALSE;
}
-
+
DEBUG (( EFI_D_INFO, "UsbDisconnectDriver: TPL after disconnect is %d, %d\n", (UINT32)UsbGetCurrentTpl(), Status));
ASSERT (UsbGetCurrentTpl () == TPL_CALLBACK);
gBS->RaiseTPL (OldTpl);
}
-
+
return Status;
}
@@ -524,7 +524,7 @@ UsbRemoveConfig ( // Remove each interface of the device
//
ReturnStatus = EFI_SUCCESS;
- for (Index = 0; Index < Device->NumOfInterface; Index++) {
+ for (Index = 0; Index < Device->NumOfInterface; Index++) {
ASSERT (Index < USB_MAX_INTERFACE);
UsbIf = Device->Interfaces[Index];
@@ -683,11 +683,11 @@ UsbEnumerateNewDev ( Parent = HubIf->Device;
Bus = Parent->Bus;
- HubApi = HubIf->HubApi;
+ HubApi = HubIf->HubApi;
Address = Bus->MaxDevices;
gBS->Stall (USB_WAIT_PORT_STABLE_STALL);
-
+
//
// Hub resets the device for at least 10 milliseconds.
// Host learns device speed. If device is of low/full speed
@@ -698,7 +698,7 @@ UsbEnumerateNewDev ( Status = HubApi->ResetPort (HubIf, Port);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to reset port %d - %r\n", Port, Status));
-
+
return Status;
}
DEBUG (( EFI_D_INFO, "UsbEnumerateNewDev: hub port %d is reset\n", Port));
@@ -927,60 +927,60 @@ UsbEnumeratePort ( // connect/disconnect. Other three events are: ENABLE, SUSPEND, RESET.
// ENABLE/RESET is used to reset port. SUSPEND isn't supported.
//
-
- if (USB_BIT_IS_SET (PortState.PortChangeStatus, USB_PORT_STAT_C_OVERCURRENT)) {
+
+ if (USB_BIT_IS_SET (PortState.PortChangeStatus, USB_PORT_STAT_C_OVERCURRENT)) {
if (USB_BIT_IS_SET (PortState.PortStatus, USB_PORT_STAT_OVERCURRENT)) {
//
// Case1:
- // Both OverCurrent and OverCurrentChange set, means over current occurs,
+ // Both OverCurrent and OverCurrentChange set, means over current occurs,
// which probably is caused by short circuit. It has to wait system hardware
// to perform recovery.
//
DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: Critical Over Current\n", Port));
return EFI_DEVICE_ERROR;
-
- }
+
+ }
//
// Case2:
- // Only OverCurrentChange set, means system has been recoveried from
+ // Only OverCurrentChange set, means system has been recoveried from
// over current. As a result, all ports are nearly power-off, so
- // it's necessary to detach and enumerate all ports again.
+ // it's necessary to detach and enumerate all ports again.
//
- DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: 2.0 device Recovery Over Current\n", Port));
+ DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: 2.0 device Recovery Over Current\n", Port));
}
- if (USB_BIT_IS_SET (PortState.PortChangeStatus, USB_PORT_STAT_C_ENABLE)) {
+ if (USB_BIT_IS_SET (PortState.PortChangeStatus, USB_PORT_STAT_C_ENABLE)) {
//
// Case3:
// 1.1 roothub port reg doesn't reflect over-current state, while its counterpart
- // on 2.0 roothub does. When over-current has influence on 1.1 device, the port
+ // on 2.0 roothub does. When over-current has influence on 1.1 device, the port
// would be disabled, so it's also necessary to detach and enumerate again.
//
DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: 1.1 device Recovery Over Current\n", Port));
}
-
+
if (USB_BIT_IS_SET (PortState.PortChangeStatus, USB_PORT_STAT_C_CONNECTION)) {
//
// Case4:
- // Device connected or disconnected normally.
+ // Device connected or disconnected normally.
//
DEBUG ((EFI_D_INFO, "UsbEnumeratePort: Device Connect/Disconnect Normally\n", Port));
}
- //
+ //
// Following as the above cases, it's safety to remove and create again.
//
Child = UsbFindChild (HubIf, Port);
-
+
if (Child != NULL) {
DEBUG (( EFI_D_INFO, "UsbEnumeratePort: device at port %d removed from root hub %p\n", Port, HubIf));
UsbRemoveDevice (Child);
}
-
+
if (USB_BIT_IS_SET (PortState.PortStatus, USB_PORT_STAT_CONNECTION)) {
//
- // Now, new device connected, enumerate and configure the device
+ // Now, new device connected, enumerate and configure the device
//
DEBUG (( EFI_D_INFO, "UsbEnumeratePort: new device connected at port %d\n", Port));
if (USB_BIT_IS_SET (PortState.PortChangeStatus, USB_PORT_STAT_C_RESET)) {
@@ -988,11 +988,11 @@ UsbEnumeratePort ( } else {
Status = UsbEnumerateNewDev (HubIf, Port, TRUE);
}
-
+
} else {
DEBUG (( EFI_D_INFO, "UsbEnumeratePort: device disconnected event on port %d\n", Port));
}
-
+
HubApi->ClearPortChange (HubIf, Port);
return Status;
}
@@ -1017,7 +1017,7 @@ UsbHubEnumeration ( UINT8 Bit;
UINT8 Index;
USB_DEVICE *Child;
-
+
ASSERT (Context != NULL);
HubIf = (USB_INTERFACE *) Context;
@@ -1082,7 +1082,7 @@ UsbRootHubEnumeration ( DEBUG (( EFI_D_INFO, "UsbEnumeratePort: The device disconnect fails at port %d from root hub %p, try again\n", Index, RootHub));
UsbRemoveDevice (Child);
}
-
+
UsbEnumeratePort (RootHub, Index);
}
}
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.c b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.c index a962f76..2ce5726 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.c +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.c @@ -2,7 +2,7 @@ Unified interface for RootHub and Hub.
-Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -716,10 +716,10 @@ UsbHubInit ( Depth = (UINT16)(HubIf->Device->Tier - 1);
DEBUG ((EFI_D_INFO, "UsbHubInit: Set Hub Depth as 0x%x\n", Depth));
UsbHubCtrlSetHubDepth (HubIf->Device, Depth);
-
+
for (Index = 0; Index < HubDesc->NumPorts; Index++) {
UsbHubCtrlSetPortFeature (HubIf->Device, Index, USB_HUB_PORT_REMOTE_WAKE_MASK);
- }
+ }
} else {
//
// Feed power to all the hub ports. It should be ok
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.h b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.h index fe9f1f7..4cf8f1f 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.h +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbHub.h @@ -96,7 +96,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #define USB_HUB_SUBCLASS_CODE 0x00
//
-// Host software return timeout if port status doesn't change
+// Host software return timeout if port status doesn't change
// after 500ms(LOOP * STALL = 5000 * 0.1ms), set by experience
//
#define USB_WAIT_PORT_STS_CHANGE_LOOP 5000
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbUtility.c b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbUtility.c index 75d9b03..e9b5fef 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbUtility.c +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbUtility.c @@ -2,7 +2,7 @@ Wrapper function for usb host controller interface.
-Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -1163,7 +1163,7 @@ UsbBusAddWantedUsbIoDP ( DevicePathPtr = DuplicateDevicePath ((EFI_DEVICE_PATH_PROTOCOL *) &mAllUsbClassDevicePath);
} else if (!IsDevicePathEnd (RemainingDevicePath)) {
//
- // If RemainingDevicePath isn't the End of Device Path Node,
+ // If RemainingDevicePath isn't the End of Device Path Node,
// Create new Usb device path according to the usb part in remaining device path
//
DevicePathPtr = GetUsbDPFromFullDP (RemainingDevicePath);
@@ -1171,7 +1171,7 @@ UsbBusAddWantedUsbIoDP ( //
// If RemainingDevicePath is the End of Device Path Node,
// skip enumerate any device and return EFI_SUCESSS
- //
+ //
return EFI_SUCCESS;
}
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.c b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.c index ac930ee..8066025 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.c +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.c @@ -2,7 +2,7 @@ Usb Hub Request Support In PEI Phase
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
-
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -440,7 +440,7 @@ PeiDoHubConfig ( HubDescriptor = (EFI_USB_HUB_DESCRIPTOR *) HubDescBuffer;
//
- // Get the hub descriptor
+ // Get the hub descriptor
//
Status = PeiUsbHubReadDesc (
PeiServices,
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.h b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.h index 341f6f3..385a14e 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.h +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/HubPeim.h @@ -2,7 +2,7 @@ Constants definitions for Usb Hub Peim
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
-
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.c b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.c index 42be13a..c5e599e 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.c +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.c @@ -1,8 +1,8 @@ /** @file
Common Libarary for PEI USB
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved. <BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved. <BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.h b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.h index 1ace89f..35f47a3 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.h +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/PeiUsbLib.h @@ -1,8 +1,8 @@ /** @file
Common Libarary for PEI USB
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved. <BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved. <BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf index 734619a..0d81bf8 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf @@ -1,7 +1,7 @@ ## @file
# The Usb Bus Peim driver is used to support recovery from usb device.
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions
@@ -54,7 +54,7 @@ [Pcd]
gEfiMdePkgTokenSpaceGuid.PcdUsbTransferTimeoutValue ## CONSUMES
-
+
[Ppis]
gPeiUsbIoPpiGuid ## PRODUCES
gPeiUsbHostControllerPpiGuid ## SOMETIMES_CONSUMES
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.uni b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.uni index bd18fdb..672c676 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.uni +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.uni @@ -3,14 +3,14 @@ //
// The USB Bus PEIM driver is used to support recovery from USB devices.
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
// of the BSD License which accompanies this distribution. The
// full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPeiExtra.uni b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPeiExtra.uni index a84da95..4b784a3 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPeiExtra.uni +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPeiExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UsbBusPei Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions
@@ -14,8 +14,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"USB Bus PEI Module for Recovery"
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbIoPeim.c b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbIoPeim.c index d13a7ee..5c65940 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbIoPeim.c +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbIoPeim.c @@ -1,8 +1,8 @@ /** @file
The module is used to implement Usb Io PPI interfaces.
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved. <BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved. <BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -19,7 +19,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. /**
Submits control transfer to a target USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_IO_PPI.
@param Request USB device request to send.
@@ -132,11 +132,11 @@ PeiUsbControlTransfer ( /**
Submits bulk transfer to a bulk endpoint of a USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_IO_PPI.
@param DeviceEndpoint Endpoint number and its direction in bit 7.
- @param Data A pointer to the buffer of data to transmit
+ @param Data A pointer to the buffer of data to transmit
from or receive into.
@param DataLength The lenght of the data buffer.
@param Timeout Indicates the maximum time, in millisecond, which the
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c index a4bb4d7..10d5232 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c @@ -1,8 +1,8 @@ /** @file
The module to produce Usb Bus PPI.
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -37,7 +37,7 @@ EFI_PEI_PPI_DESCRIPTOR mUsbIoPpiList = { /**
The enumeration routine to detect device change.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
@param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
@@ -56,7 +56,7 @@ PeiUsbEnumeration ( /**
Configure new detected usb device.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@param Port The port to be configured.
@@ -77,7 +77,7 @@ PeiConfigureUsbDevice ( /**
Get all configurations from a detected usb device.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@@ -94,7 +94,7 @@ PeiUsbGetAllConfiguration ( /**
Get the start position of next wanted descriptor.
-
+
@param Buffer Buffer containing data to parse.
@param Length Buffer length.
@param DescType Descriptor type.
@@ -116,7 +116,7 @@ GetExpectedDescriptor ( /**
The entrypoint of the module, it will enumerate all HCs.
-
+
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@@ -142,7 +142,7 @@ PeimInitializeUsb ( }
//
- // gPeiUsbHostControllerPpiGuid and gPeiUsb2HostControllerPpiGuid should not
+ // gPeiUsbHostControllerPpiGuid and gPeiUsb2HostControllerPpiGuid should not
// be produced at the same time
//
Index = 0;
@@ -176,18 +176,18 @@ PeimInitializeUsb ( Index,
NULL,
(VOID **) &Usb2HcPpi
- );
+ );
if (EFI_ERROR (Status)) {
//
// No more host controller, break out
//
break;
- }
- PeiUsbEnumeration ((EFI_PEI_SERVICES **) PeiServices, NULL, Usb2HcPpi);
+ }
+ PeiUsbEnumeration ((EFI_PEI_SERVICES **) PeiServices, NULL, Usb2HcPpi);
Index++;
}
}
-
+
if (Index == 0) {
return EFI_UNSUPPORTED;
}
@@ -198,7 +198,7 @@ PeimInitializeUsb ( /**
The Hub Enumeration just scans the hub ports one time. It also
doesn't support hot-plug.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@param CurrentAddress The DeviceAddress of usb device.
@@ -289,13 +289,13 @@ PeiHubEnumeration ( NewPeiUsbDevice->IsHub = 0x0;
NewPeiUsbDevice->DownStreamPortNo = 0x0;
- if (((PortStatus.PortChangeStatus & USB_PORT_STAT_C_RESET) == 0) ||
+ if (((PortStatus.PortChangeStatus & USB_PORT_STAT_C_RESET) == 0) ||
((PortStatus.PortStatus & (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) == 0)) {
//
- // If the port already has reset change flag and is connected and enabled, skip the port reset logic.
+ // If the port already has reset change flag and is connected and enabled, skip the port reset logic.
//
PeiResetHubPort (PeiServices, UsbIoPpi, (UINT8)(Index + 1));
-
+
PeiHubGetPortStatus (
PeiServices,
UsbIoPpi,
@@ -406,7 +406,7 @@ PeiHubEnumeration ( /**
The enumeration routine to detect device change.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
@param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
@@ -440,7 +440,7 @@ PeiUsbEnumeration ( PeiServices,
Usb2HcPpi,
(UINT8 *) &NumOfRootPort
- );
+ );
} else if (UsbHcPpi != NULL) {
UsbHcPpi->GetRootHubPortNumber (
PeiServices,
@@ -464,7 +464,7 @@ PeiUsbEnumeration ( Usb2HcPpi,
(UINT8) Index,
&PortStatus
- );
+ );
} else {
UsbHcPpi->GetRootHubPortStatus (
PeiServices,
@@ -515,10 +515,10 @@ PeiUsbEnumeration ( PeiUsbDevice->IsHub = 0x0;
PeiUsbDevice->DownStreamPortNo = 0x0;
- if (((PortStatus.PortChangeStatus & USB_PORT_STAT_C_RESET) == 0) ||
+ if (((PortStatus.PortChangeStatus & USB_PORT_STAT_C_RESET) == 0) ||
((PortStatus.PortStatus & (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) == 0)) {
//
- // If the port already has reset change flag and is connected and enabled, skip the port reset logic.
+ // If the port already has reset change flag and is connected and enabled, skip the port reset logic.
//
ResetRootPort (
PeiServices,
@@ -550,7 +550,7 @@ PeiUsbEnumeration ( Usb2HcPpi,
(UINT8) Index,
EfiUsbPortResetChange
- );
+ );
} else {
UsbHcPpi->ClearRootHubPortFeature (
PeiServices,
@@ -650,7 +650,7 @@ PeiUsbEnumeration ( /**
Configure new detected usb device.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@param Port The port to be configured.
@@ -767,7 +767,7 @@ PeiConfigureUsbDevice ( /**
Get all configurations from a detected usb device.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@@ -920,7 +920,7 @@ PeiUsbGetAllConfiguration ( /**
Get the start position of next wanted descriptor.
-
+
@param Buffer Buffer containing data to parse.
@param Length Buffer length.
@param DescType Descriptor type.
@@ -998,7 +998,7 @@ GetExpectedDescriptor ( /**
Send reset signal over the given root hub port.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
@param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
@@ -1022,7 +1022,7 @@ ResetRootPort ( if (Usb2HcPpi != NULL) {
MicroSecondDelay (200 * 1000);
-
+
//
// reset root port
//
@@ -1032,12 +1032,12 @@ ResetRootPort ( PortNum,
EfiUsbPortReset
);
-
+
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "SetRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
}
-
+
//
// Drive the reset signal for at least 50ms. Check USB 2.0 Spec
// section 7.1.7.5 for timing requirements.
@@ -1053,7 +1053,7 @@ ResetRootPort ( PortNum,
EfiUsbPortReset
);
-
+
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "ClearRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
@@ -1073,7 +1073,7 @@ ResetRootPort ( Usb2HcPpi,
PortNum,
&PortStatus
- );
+ );
if (EFI_ERROR (Status)) {
return;
}
@@ -1103,7 +1103,7 @@ ResetRootPort ( PortNum,
EfiUsbPortConnectChange
);
-
+
//
// Set port enable
//
@@ -1113,18 +1113,18 @@ ResetRootPort ( PortNum,
EfiUsbPortEnable
);
-
+
Usb2HcPpi->ClearRootHubPortFeature (
PeiServices,
Usb2HcPpi,
PortNum,
EfiUsbPortEnableChange
);
-
+
MicroSecondDelay ((RetryIndex + 1) * 50 * 1000);
} else {
MicroSecondDelay (200 * 1000);
-
+
//
// reset root port
//
@@ -1134,18 +1134,18 @@ ResetRootPort ( PortNum,
EfiUsbPortReset
);
-
+
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "SetRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
}
-
+
//
// Drive the reset signal for at least 50ms. Check USB 2.0 Spec
// section 7.1.7.5 for timing requirements.
//
MicroSecondDelay (USB_SET_ROOT_PORT_RESET_STALL);
-
+
//
// clear reset root port
//
@@ -1155,12 +1155,12 @@ ResetRootPort ( PortNum,
EfiUsbPortReset
);
-
+
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "ClearRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
}
-
+
MicroSecondDelay (USB_CLR_ROOT_PORT_RESET_STALL);
//
@@ -1175,7 +1175,7 @@ ResetRootPort ( UsbHcPpi,
PortNum,
&PortStatus
- );
+ );
if (EFI_ERROR (Status)) {
return;
}
@@ -1205,7 +1205,7 @@ ResetRootPort ( PortNum,
EfiUsbPortConnectChange
);
-
+
//
// Set port enable
//
@@ -1215,14 +1215,14 @@ ResetRootPort ( PortNum,
EfiUsbPortEnable
);
-
+
UsbHcPpi->ClearRootHubPortFeature (
PeiServices,
UsbHcPpi,
PortNum,
EfiUsbPortEnableChange
);
-
+
MicroSecondDelay ((RetryIndex + 1) * 50 * 1000);
}
return;
diff --git a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.h b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.h index dff8eeb..1610974 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.h +++ b/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.h @@ -1,8 +1,8 @@ /** @file
Usb Peim definition.
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved. <BR>
-
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved. <BR>
+
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
@@ -88,7 +88,7 @@ typedef struct { #define USB_WAIT_PORT_STS_CHANGE_STALL (100)
//
-// Host software return timeout if port status doesn't change
+// Host software return timeout if port status doesn't change
// after 500ms(LOOP * STALL = 5000 * 0.1ms), set by experience
//
#define USB_WAIT_PORT_STS_CHANGE_LOOP 5000
@@ -112,7 +112,7 @@ typedef struct { /**
Submits control transfer to a target USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_IO_PPI.
@param Request USB device request to send.
@@ -144,11 +144,11 @@ PeiUsbControlTransfer ( /**
Submits bulk transfer to a bulk endpoint of a USB device.
-
+
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_IO_PPI.
@param DeviceEndpoint Endpoint number and its direction in bit 7.
- @param Data A pointer to the buffer of data to transmit
+ @param Data A pointer to the buffer of data to transmit
from or receive into.
@param DataLength The lenght of the data buffer.
@param Timeout Indicates the maximum time, in millisecond, which the
@@ -233,7 +233,7 @@ PeiUsbPortReset ( /**
Send reset signal over the given root hub port.
-
+
@param PeiServices Describes the list of possible PEI Services.
@param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
@param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
diff --git a/MdeModulePkg/Bus/Usb/UsbKbDxe/EfiKey.c b/MdeModulePkg/Bus/Usb/UsbKbDxe/EfiKey.c index 722350f..40f8399 100644 --- a/MdeModulePkg/Bus/Usb/UsbKbDxe/EfiKey.c +++ b/MdeModulePkg/Bus/Usb/UsbKbDxe/EfiKey.c @@ -765,9 +765,9 @@ USBKeyboardWaitForKey ( //
// Enter critical section
- //
+ //
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
-
+
//
// WaitforKey doesn't suppor the partial key.
// Considering if the partial keystroke is enabled, there maybe a partial
@@ -1223,7 +1223,7 @@ KeyNotifyProcessHandler ( while (TRUE) {
//
// Enter critical section
- //
+ //
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
Status = Dequeue (&UsbKeyboardDevice->EfiKeyQueueForNotify, &KeyData, sizeof (KeyData));
//
diff --git a/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf b/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf index 7939a18..41f0d9a 100644 --- a/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf +++ b/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf @@ -12,7 +12,7 @@ # 2. Universal Serial Bus HID Usage Tables, ver 1.12
# 3. UEFI Specification, v2.1
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -39,7 +39,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC ARM AARCH64
#
-# DRIVER_BINDING = gUsbKeyboardDriverBinding
+# DRIVER_BINDING = gUsbKeyboardDriverBinding
# COMPONENT_NAME = gUsbKeyboardComponentName
# COMPONENT_NAME2 = gUsbKeyboardComponentName2
#
@@ -87,7 +87,7 @@ # Otherwise, USB keyboard module tries to use its carried default layout.
#
gEfiHiiDatabaseProtocolGuid ## SOMETIMES_CONSUMES
-
+
[FeaturePcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver ## CONSUMES
diff --git a/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.uni b/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.uni index 7dcbf12..9bf6c3e 100644 --- a/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.uni +++ b/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.uni @@ -12,13 +12,13 @@ // 2. Universal Serial Bus HID Usage Tables, ver 1.12
// 3. UEFI Specification, v2.1
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxeExtra.uni b/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxeExtra.uni index 6a76634..fe4c747 100644 --- a/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxeExtra.uni +++ b/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UsbKbDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"USB Keyboard DXE Driver"
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMass.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMass.h index ebfb254..7dd7871 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMass.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMass.h @@ -1,8 +1,8 @@ /** @file
- Definition of USB Mass Storage Class and its value, USB Mass Transport Protocol,
+ Definition of USB Mass Storage Class and its value, USB Mass Transport Protocol,
and other common definitions.
-Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c index 3bf6e6a..dd5950c 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c @@ -224,7 +224,7 @@ UsbBootExecCmd ( If the device isn't ready, wait for it. If the device is ready
and error occurs, retry the command again until it exceeds the
limit of retrial times.
-
+
@param UsbMass The device to issue commands to
@param Cmd The command to execute
@param CmdLen The length of the command
@@ -412,7 +412,7 @@ UsbBootInquiry ( @retval EFI_SUCCESS The disk geometry is successfully retrieved.
@retval EFI_NOT_READY The returned block size is zero.
@retval Other READ CAPACITY 16 bytes command execution failed.
-
+
**/
EFI_STATUS
UsbBootReadCapacity16 (
@@ -442,7 +442,7 @@ UsbBootReadCapacity16 ( ZeroMem ((CapacityCmd + 2), 8);
CapacityCmd[13] = sizeof (CapacityData);
-
+
Status = UsbBootExecCmdWithRetry (
UsbMass,
CapacityCmd,
@@ -464,13 +464,13 @@ UsbBootReadCapacity16 ( Media->LastBlock = SwapBytes64 (ReadUnaligned64 ((CONST UINT64 *) &(CapacityData.LastLba7)));
BlockSize = SwapBytes32 (ReadUnaligned32 ((CONST UINT32 *) &(CapacityData.BlockSize3)));
-
+
Media->LowestAlignedLba = (CapacityData.LowestAlignLogic2 << 8) |
CapacityData.LowestAlignLogic1;
Media->LogicalBlocksPerPhysicalBlock = (1 << CapacityData.LogicPerPhysical);
if (BlockSize == 0) {
//
- // Get sense data
+ // Get sense data
//
return UsbBootRequestSense (UsbMass);
} else {
@@ -494,7 +494,7 @@ UsbBootReadCapacity16 ( @retval EFI_SUCCESS The disk geometry is successfully retrieved.
@retval EFI_NOT_READY The returned block size is zero.
@retval Other READ CAPACITY command execution failed.
-
+
**/
EFI_STATUS
UsbBootReadCapacity (
@@ -538,7 +538,7 @@ UsbBootReadCapacity ( BlockSize = SwapBytes32 (ReadUnaligned32 ((CONST UINT32 *) CapacityData.BlockLen));
if (BlockSize == 0) {
//
- // Get sense data
+ // Get sense data
//
return UsbBootRequestSense (UsbMass);
} else {
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h index f8a0708..d4042e3 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h @@ -2,7 +2,7 @@ Definition of the command set of USB Mass Storage Specification
for Bootability, Revision 1.0.
-Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -21,7 +21,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. // INQUIRY/REQUEST_SENSE are "No Timeout Commands" as specified
// by Multi-Media Commands (MMC) set.
// Others are "Group 1 Timeout Commands". That is,
-// they should be retried if driver is ready.
+// they should be retried if driver is ready.
//
#define USB_BOOT_INQUIRY_OPCODE 0x12
#define USB_BOOT_REQUEST_SENSE_OPCODE 0x03
@@ -82,17 +82,17 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. //
// Mass command timeout, refers to specification[USB20-9.2.6.1]
//
-// USB2.0 Spec define the up-limit timeout 5s for all command. USB floppy,
-// USB CD-Rom and iPod devices are much slower than USB key when reponse
+// USB2.0 Spec define the up-limit timeout 5s for all command. USB floppy,
+// USB CD-Rom and iPod devices are much slower than USB key when reponse
// most of commands, So we set 5s as timeout here.
-//
+//
#define USB_BOOT_GENERAL_CMD_TIMEOUT (5 * USB_MASS_1_SECOND)
//
// The required commands are INQUIRY, READ CAPACITY, TEST UNIT READY,
// READ10, WRITE10, and REQUEST SENSE. The BLOCK_IO protocol uses LBA
// so it isn't necessary to issue MODE SENSE / READ FORMAT CAPACITY
-// command to retrieve the disk gemotrics.
+// command to retrieve the disk gemotrics.
//
#pragma pack(1)
typedef struct {
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c index 477bfa7..3bd18b2 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c @@ -2,7 +2,7 @@ Implementation of the USB mass storage Bulk-Only Transport protocol,
according to USB Mass Storage Class Bulk-Only Transport, Revision 1.0.
-Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -272,7 +272,7 @@ UsbBotDataTransfer ( );
if (EFI_ERROR (Status)) {
if (USB_IS_ERROR (Result, EFI_USB_ERR_STALL)) {
- DEBUG ((EFI_D_INFO, "UsbBotDataTransfer: (%r)\n", Status));
+ DEBUG ((EFI_D_INFO, "UsbBotDataTransfer: (%r)\n", Status));
DEBUG ((EFI_D_INFO, "UsbBotDataTransfer: DataIn Stall\n"));
UsbClearEndpointStall (UsbBot->UsbIo, Endpoint->EndpointAddress);
} else if (USB_IS_ERROR (Result, EFI_USB_ERR_NAK)) {
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h index 502c670..9bc007f 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h @@ -3,7 +3,7 @@ based on the "Universal Serial Bus Mass Storage Class Bulk-Only
Transport" Revision 1.0, September 31, 1999.
-Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -43,7 +43,7 @@ extern USB_MASS_TRANSPORT mUsbBotTransport; //
// Usb Bot wait device reset complete, set by experience
-//
+//
#define USB_BOT_RESET_DEVICE_STALL (100 * USB_MASS_1_MILLISECOND)
//
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c index 3f6201d..44e377b 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c @@ -4,7 +4,7 @@ Notice: it is being obsoleted by the standard body in favor of the BOT
(Bulk-Only Transport).
-Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -147,7 +147,7 @@ UsbCbiInit ( } else {
FreePool (UsbCbi);
}
-
+
return EFI_SUCCESS;
ON_ERROR:
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h index b414a46..70be929 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h @@ -2,7 +2,7 @@ Defination for the USB mass storage Control/Bulk/Interrupt (CBI) transport,
according to USB Mass Storage Class Control/Bulk/Interrupt (CBI) Transport, Revision 1.1.
-Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -27,7 +27,7 @@ extern USB_MASS_TRANSPORT mUsbCbi1Transport; #define USB_CBI_MAX_RETRY 3
//
// Time to wait for USB CBI reset to complete, set by experience
-//
+//
#define USB_CBI_RESET_DEVICE_STALL (50 * USB_MASS_1_MILLISECOND)
//
// USB CBI transport timeout, set by experience
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.c index 1fa8543..e0f9b4b 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.c +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.c @@ -1,7 +1,7 @@ /** @file
This file is used to implement the EFI_DISK_INFO_PROTOCOL interface.
-Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -26,7 +26,7 @@ EFI_DISK_INFO_PROTOCOL gUsbDiskInfoProtocolTemplate = { Initialize the installation of DiskInfo protocol.
This function prepares for the installation of DiskInfo protocol on the child handle.
- By default, it installs DiskInfo protocol with USB interface GUID.
+ By default, it installs DiskInfo protocol with USB interface GUID.
@param[in] UsbMass The pointer of USB_MASS_DEVICE.
@@ -42,7 +42,7 @@ InitializeDiskInfo ( /**
Provides inquiry information for the controller type.
-
+
This function is used to get inquiry data. Data format
of Identify data is defined by the Interface GUID.
@@ -51,9 +51,9 @@ InitializeDiskInfo ( @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading InquiryData from device
- @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
**/
EFI_STATUS
@@ -85,16 +85,16 @@ UsbDiskInfoInquiry ( This function is used to get identify data. Data format
of Identify data is defined by the Interface GUID.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
instance.
@param[in, out] IdentifyData Pointer to a buffer for the identify data.
@param[in, out] IdentifyDataSize Pointer to the value for the identify data
size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
- @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
**/
EFI_STATUS
@@ -110,8 +110,8 @@ UsbDiskInfoIdentify ( /**
Provides sense data information for the controller type.
-
- This function is used to get sense data.
+
+ This function is used to get sense data.
Data format of Sense data is defined by the Interface GUID.
@param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@@ -141,7 +141,7 @@ UsbDiskInfoSenseData ( /**
This function is used to get controller information.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
@param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.h index e0a32ca..c206040 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassDiskInfo.h @@ -1,7 +1,7 @@ /** @file
Header file for EFI_DISK_INFO_PROTOCOL interface.
-Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -19,7 +19,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Initialize the installation of DiskInfo protocol.
This function prepares for the installation of DiskInfo protocol on the child handle.
- By default, it installs DiskInfo protocol with USB interface GUID.
+ By default, it installs DiskInfo protocol with USB interface GUID.
@param UsbMass The pointer of USB_MASS_DEVICE.
@@ -32,7 +32,7 @@ InitializeDiskInfo ( /**
Provides inquiry information for the controller type.
-
+
This function is used to get inquiry data. Data format
of Identify data is defined by the Interface GUID.
@@ -41,9 +41,9 @@ InitializeDiskInfo ( @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading InquiryData from device
- @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
**/
EFI_STATUS
@@ -60,16 +60,16 @@ UsbDiskInfoInquiry ( This function is used to get identify data. Data format
of Identify data is defined by the Interface GUID.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
instance.
@param[in, out] IdentifyData Pointer to a buffer for the identify data.
@param[in, out] IdentifyDataSize Pointer to the value for the identify data
size.
@retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_NOT_FOUND Device does not support this data class
- @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
- @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
**/
EFI_STATUS
@@ -82,8 +82,8 @@ UsbDiskInfoIdentify ( /**
Provides sense data information for the controller type.
-
- This function is used to get sense data.
+
+ This function is used to get sense data.
Data format of Sense data is defined by the Interface GUID.
@param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@@ -110,7 +110,7 @@ UsbDiskInfoSenseData ( /**
This function is used to get controller information.
- @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
@param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c index 448bcc2..62bf3c5 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c @@ -16,7 +16,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #define USB_MASS_TRANSPORT_COUNT 3
//
-// Array of USB transport interfaces.
+// Array of USB transport interfaces.
//
USB_MASS_TRANSPORT *mUsbMassTransport[USB_MASS_TRANSPORT_COUNT] = {
&mUsbCbi0Transport,
@@ -36,7 +36,7 @@ EFI_DRIVER_BINDING_PROTOCOL gUSBMassDriverBinding = { /**
Reset the block device.
- This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
+ This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
It resets the block device hardware.
ExtendedVerification is ignored in this implementation.
@@ -76,7 +76,7 @@ UsbMassReset ( /**
Reads the requested number of blocks from the device.
- This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
+ This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
It reads the requested number of blocks from the device.
All the blocks are read, or an error is returned.
@@ -191,7 +191,7 @@ ON_EXIT: /**
Writes a specified number of blocks to the device.
- This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
+ This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
It writes a specified number of blocks to the device.
All blocks are written, or an error is returned.
@@ -295,7 +295,7 @@ UsbMassWriteBlocks ( Status = UsbBootWriteBlocks16 (UsbMass, Lba, TotalBlock, Buffer);
} else {
Status = UsbBootWriteBlocks (UsbMass, (UINT32) Lba, TotalBlock, Buffer);
- }
+ }
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UsbMassWriteBlocks: UsbBootWriteBlocks (%r) -> Reset\n", Status));
@@ -402,7 +402,7 @@ UsbMassInitTransport ( EFI_USB_INTERFACE_DESCRIPTOR Interface;
UINT8 Index;
EFI_STATUS Status;
-
+
Status = gBS->OpenProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
@@ -415,12 +415,12 @@ UsbMassInitTransport ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
Status = UsbIo->UsbGetInterfaceDescriptor (UsbIo, &Interface);
if (EFI_ERROR (Status)) {
goto ON_EXIT;
}
-
+
Status = EFI_UNSUPPORTED;
//
@@ -443,7 +443,7 @@ UsbMassInitTransport ( }
//
- // For BOT device, try to get its max LUN.
+ // For BOT device, try to get its max LUN.
// If max LUN is 0, then it is a non-lun device.
// Otherwise, it is a multi-lun device.
//
@@ -458,7 +458,7 @@ ON_EXIT: This->DriverBindingHandle,
Controller
);
- return Status;
+ return Status;
}
/**
@@ -495,14 +495,14 @@ UsbMassInitMultiLun ( ASSERT (MaxLun > 0);
ReturnStatus = EFI_NOT_FOUND;
- for (Index = 0; Index <= MaxLun; Index++) {
+ for (Index = 0; Index <= MaxLun; Index++) {
DEBUG ((EFI_D_INFO, "UsbMassInitMultiLun: Start to initialize No.%d logic unit\n", Index));
-
+
UsbIo = NULL;
UsbMass = AllocateZeroPool (sizeof (USB_MASS_DEVICE));
ASSERT (UsbMass != NULL);
-
+
UsbMass->Signature = USB_MASS_SIGNATURE;
UsbMass->UsbIo = UsbIo;
UsbMass->BlockIo.Media = &UsbMass->BlockIoMedia;
@@ -514,7 +514,7 @@ UsbMassInitMultiLun ( UsbMass->Transport = Transport;
UsbMass->Context = Context;
UsbMass->Lun = Index;
-
+
//
// Initialize the media parameter data for EFI_BLOCK_IO_MEDIA of Block I/O Protocol.
//
@@ -531,11 +531,11 @@ UsbMassInitMultiLun ( LunNode.Header.Type = MESSAGING_DEVICE_PATH;
LunNode.Header.SubType = MSG_DEVICE_LOGICAL_UNIT_DP;
LunNode.Lun = UsbMass->Lun;
-
+
SetDevicePathNodeLength (&LunNode.Header, sizeof (LunNode));
-
+
UsbMass->DevicePath = AppendDevicePathNode (DevicePath, &LunNode.Header);
-
+
if (UsbMass->DevicePath == NULL) {
DEBUG ((EFI_D_ERROR, "UsbMassInitMultiLun: failed to create device logic unit device path\n"));
Status = EFI_OUT_OF_RESOURCES;
@@ -558,7 +558,7 @@ UsbMassInitMultiLun ( &UsbMass->DiskInfo,
NULL
);
-
+
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UsbMassInitMultiLun: InstallMultipleProtocolInterfaces (%r)\n", Status));
FreePool (UsbMass->DevicePath);
@@ -597,7 +597,7 @@ UsbMassInitMultiLun ( ReturnStatus = EFI_SUCCESS;
DEBUG ((EFI_D_INFO, "UsbMassInitMultiLun: Success to initialize No.%d logic unit\n", Index));
}
-
+
return ReturnStatus;
}
@@ -642,7 +642,7 @@ UsbMassInitNonLun ( DEBUG ((EFI_D_ERROR, "UsbMassInitNonLun: OpenUsbIoProtocol By Driver (%r)\n", Status));
goto ON_ERROR;
}
-
+
UsbMass->Signature = USB_MASS_SIGNATURE;
UsbMass->Controller = Controller;
UsbMass->UsbIo = UsbIo;
@@ -654,7 +654,7 @@ UsbMassInitNonLun ( UsbMass->OpticalStorage = FALSE;
UsbMass->Transport = Transport;
UsbMass->Context = Context;
-
+
//
// Initialize the media parameter data for EFI_BLOCK_IO_MEDIA of Block I/O Protocol.
//
@@ -663,7 +663,7 @@ UsbMassInitNonLun ( DEBUG ((EFI_D_ERROR, "UsbMassInitNonLun: UsbMassInitMedia (%r)\n", Status));
goto ON_ERROR;
}
-
+
InitializeDiskInfo (UsbMass);
Status = gBS->InstallMultipleProtocolInterfaces (
@@ -692,7 +692,7 @@ ON_ERROR: Controller
);
}
- return Status;
+ return Status;
}
@@ -804,7 +804,7 @@ USBMassDriverBindingStart ( VOID *Context;
UINT8 MaxLun;
EFI_STATUS Status;
- EFI_USB_IO_PROTOCOL *UsbIo;
+ EFI_USB_IO_PROTOCOL *UsbIo;
EFI_TPL OldTpl;
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
@@ -824,7 +824,7 @@ USBMassDriverBindingStart ( // Initialize data for device that does not support multiple LUNSs.
//
Status = UsbMassInitNonLun (This, Controller, Transport, Context);
- if (EFI_ERROR (Status)) {
+ if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: UsbMassInitNonLun (%r)\n", Status));
}
} else {
@@ -839,7 +839,7 @@ USBMassDriverBindingStart ( Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
-
+
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: OpenDevicePathProtocol By Driver (%r)\n", Status));
goto Exit;
@@ -853,7 +853,7 @@ USBMassDriverBindingStart ( Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
-
+
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "USBMassDriverBindingStart: OpenUsbIoProtocol By Driver (%r)\n", Status));
gBS->CloseProtocol (
@@ -941,7 +941,7 @@ USBMassDriverBindingStop ( Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
-
+
if (EFI_ERROR(Status)) {
//
// This is a 2nd type handle(multi-lun root), it needs to close devicepath
@@ -962,13 +962,13 @@ USBMassDriverBindingStop ( DEBUG ((EFI_D_INFO, "Success to stop multi-lun root handle\n"));
return EFI_SUCCESS;
}
-
+
//
// This is a 1st type handle(non-multi-lun), which only needs to uninstall
// Block I/O Protocol, close USB I/O Protocol and free mass device.
//
UsbMass = USB_MASS_DEVICE_FROM_BLOCK_IO (BlockIo);
-
+
//
// Uninstall Block I/O protocol from the device handle,
// then call the transport protocol to stop itself.
@@ -984,24 +984,24 @@ USBMassDriverBindingStop ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
gBS->CloseProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
-
+
UsbMass->Transport->CleanUp (UsbMass->Context);
FreePool (UsbMass);
-
+
DEBUG ((EFI_D_INFO, "Success to stop non-multi-lun root handle\n"));
return EFI_SUCCESS;
- }
+ }
//
// This is a 3rd type handle(multi-lun), which needs uninstall
- // Block I/O Protocol and Device Path Protocol, close USB I/O Protocol and
+ // Block I/O Protocol and Device Path Protocol, close USB I/O Protocol and
// free mass device for all children.
//
AllChildrenStopped = TRUE;
@@ -1030,7 +1030,7 @@ USBMassDriverBindingStop ( This->DriverBindingHandle,
ChildHandleBuffer[Index]
);
-
+
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandleBuffer[Index],
&gEfiDevicePathProtocolGuid,
@@ -1041,14 +1041,14 @@ USBMassDriverBindingStop ( &UsbMass->DiskInfo,
NULL
);
-
+
if (EFI_ERROR (Status)) {
//
// Fail to uninstall Block I/O Protocol and Device Path Protocol, so re-open USB I/O Protocol by child.
//
AllChildrenStopped = FALSE;
DEBUG ((EFI_D_ERROR, "Fail to stop No.%d multi-lun child handle when uninstalling blockio and devicepath\n", (UINT32)Index));
-
+
gBS->OpenProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
@@ -1071,7 +1071,7 @@ USBMassDriverBindingStop ( if (!AllChildrenStopped) {
return EFI_DEVICE_ERROR;
}
-
+
DEBUG ((EFI_D_INFO, "Success to stop all %d multi-lun children handles\n", (UINT32) NumberOfChildren));
return EFI_SUCCESS;
}
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h index 0f013c1..b17d88e 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h @@ -2,7 +2,7 @@ Definitions of functions for Driver Binding Protocol and Block I/O Protocol,
and other internal definitions.
-Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -107,7 +107,7 @@ USBMassDriverBindingStop ( /**
Reset the block device.
- This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
+ This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
It resets the block device hardware.
ExtendedVerification is ignored in this implementation.
@@ -129,7 +129,7 @@ UsbMassReset ( /**
Reads the requested number of blocks from the device.
- This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
+ This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
It reads the requested number of blocks from the device.
All the blocks are read, or an error is returned.
@@ -163,7 +163,7 @@ UsbMassReadBlocks ( /**
Writes a specified number of blocks to the device.
- This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
+ This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
It writes a specified number of blocks to the device.
All blocks are written, or an error is returned.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf index 26d15c7..1fdd434 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf @@ -13,7 +13,7 @@ # 3. USB Mass Storage Class Bulk-Only Transport, Revision 1.0.
# 4. UEFI Specification, v2.1
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -40,7 +40,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
-# DRIVER_BINDING = gUSBMassDriverBinding
+# DRIVER_BINDING = gUSBMassDriverBinding
# COMPONENT_NAME = gUsbMassStorageComponentName
# COMPONENT_NAME2 = gUsbMassStorageComponentName2
#
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.uni b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.uni index 80960be..b29a4bf 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.uni +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.uni @@ -13,13 +13,13 @@ // 3. USB Mass Storage Class Bulk-Only Transport, Revision 1.0.
// 4. UEFI Specification, v2.1
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxeExtra.uni b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxeExtra.uni index 4e09a8d..c3cba65 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxeExtra.uni +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UsbMassStorageDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"USB Mass Storage DXE Driver"
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.c b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.c index 9fe9244..965195c 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.c +++ b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.c @@ -1,7 +1,7 @@ /** @file
USB Mouse Driver that manages USB mouse and produces Absolute Pointer Protocol.
-Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -91,7 +91,7 @@ USBMouseAbsolutePointerDriverBindingSupported ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
//
// Use the USB I/O Protocol interface to check whether Controller is
// a mouse device that can be managed by this driver.
@@ -100,14 +100,14 @@ USBMouseAbsolutePointerDriverBindingSupported ( if (!IsUsbMouse (UsbIo)) {
Status = EFI_UNSUPPORTED;
}
-
+
gBS->CloseProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
-
+
return Status;
}
@@ -161,12 +161,12 @@ USBMouseAbsolutePointerDriverBindingStart ( (VOID **) &UsbIo,
This->DriverBindingHandle,
Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
+ EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
goto ErrorExit1;
}
-
+
UsbMouseAbsolutePointerDevice = AllocateZeroPool (sizeof (USB_MOUSE_ABSOLUTE_POINTER_DEV));
ASSERT (UsbMouseAbsolutePointerDevice != NULL);
@@ -271,8 +271,8 @@ USBMouseAbsolutePointerDriverBindingStart ( // Initialize and install EFI Absolute Pointer Protocol.
//
UsbMouseAbsolutePointerDevice->AbsolutePointerProtocol.GetState = GetMouseAbsolutePointerState;
- UsbMouseAbsolutePointerDevice->AbsolutePointerProtocol.Reset = UsbMouseAbsolutePointerReset;
- UsbMouseAbsolutePointerDevice->AbsolutePointerProtocol.Mode = &UsbMouseAbsolutePointerDevice->Mode;
+ UsbMouseAbsolutePointerDevice->AbsolutePointerProtocol.Reset = UsbMouseAbsolutePointerReset;
+ UsbMouseAbsolutePointerDevice->AbsolutePointerProtocol.Mode = &UsbMouseAbsolutePointerDevice->Mode;
Status = gBS->CreateEvent (
EVT_NOTIFY_WAIT,
@@ -470,7 +470,7 @@ USBMouseAbsolutePointerDriverBindingStop ( // Free all resources.
//
gBS->CloseEvent (UsbMouseAbsolutePointerDevice->AbsolutePointerProtocol.WaitForInput);
-
+
if (UsbMouseAbsolutePointerDevice->DelayedRecoveryEvent != NULL) {
gBS->CloseEvent (UsbMouseAbsolutePointerDevice->DelayedRecoveryEvent);
UsbMouseAbsolutePointerDevice->DelayedRecoveryEvent = NULL;
@@ -596,7 +596,7 @@ InitializeUsbMouseDevice ( Total = 0;
Start = FALSE;
- Head = (USB_DESC_HEAD *)Buf;
+ Head = (USB_DESC_HEAD *)Buf;
MouseHidDesc = NULL;
//
@@ -784,7 +784,7 @@ OnMouseInterruptComplete ( //
// Delete & Submit this interrupt again
- // Handler of DelayedRecoveryEvent triggered by timer will re-submit the interrupt.
+ // Handler of DelayedRecoveryEvent triggered by timer will re-submit the interrupt.
//
UsbIo->UsbAsyncInterruptTransfer (
UsbIo,
@@ -856,15 +856,15 @@ OnMouseInterruptComplete ( /**
Retrieves the current state of a pointer device.
- @param This A pointer to the EFI_ABSOLUTE_POINTER_PROTOCOL instance.
+ @param This A pointer to the EFI_ABSOLUTE_POINTER_PROTOCOL instance.
@param MouseState A pointer to the state information on the pointer device.
@retval EFI_SUCCESS The state of the pointer device was returned in State.
@retval EFI_NOT_READY The state of the pointer device has not changed since the last call to
- GetState().
+ GetState().
@retval EFI_DEVICE_ERROR A device error occurred while attempting to retrieve the pointer device's
- current state.
- @retval EFI_INVALID_PARAMETER State is NULL.
+ current state.
+ @retval EFI_INVALID_PARAMETER State is NULL.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.h b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.h index 08b8d56..b1ea7d2 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.h +++ b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointer.h @@ -1,7 +1,7 @@ /** @file
Helper routine and corresponding data struct used by USB Mouse Absolute Pointer Driver.
-Copyright (c) 2004 - 2012, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -311,15 +311,15 @@ UsbMouseAbsolutePointerComponentNameGetControllerName ( /**
Retrieves the current state of a pointer device.
- @param This A pointer to the EFI_ABSOLUTE_POINTER_PROTOCOL instance.
+ @param This A pointer to the EFI_ABSOLUTE_POINTER_PROTOCOL instance.
@param MouseState A pointer to the state information on the pointer device.
@retval EFI_SUCCESS The state of the pointer device was returned in State.
@retval EFI_NOT_READY The state of the pointer device has not changed since the last call to
- GetState().
+ GetState().
@retval EFI_DEVICE_ERROR A device error occurred while attempting to retrieve the pointer device's
- current state.
- @retval EFI_INVALID_PARAMETER State is NULL.
+ current state.
+ @retval EFI_INVALID_PARAMETER State is NULL.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.inf b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.inf index af10382..10e74b9 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.inf +++ b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.inf @@ -9,7 +9,7 @@ # 1. Universal Serial Bus HID Firmware Specification, ver 1.11
# 2. UEFI Specification, v2.1
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -36,7 +36,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
-# DRIVER_BINDING = gUsbMouseAbsolutePointerDriverBinding
+# DRIVER_BINDING = gUsbMouseAbsolutePointerDriverBinding
# COMPONENT_NAME = gUsbMouseAbsolutePointerComponentName
# COMPONENT_NAME2 = gUsbMouseAbsolutePointerComponentName2
#
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.uni b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.uni index f3d1b1d..3270213 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.uni +++ b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe.uni @@ -9,13 +9,13 @@ // 1. Universal Serial Bus HID Firmware Specification, ver 1.11
// 2. UEFI Specification, v2.1
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxeExtra.uni b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxeExtra.uni index ea9f4d9..ab9b12a 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxeExtra.uni +++ b/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UsbMouseAbsolutePointerDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"USB Tablet Pointer DXE Driver"
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseDxe/MouseHid.c b/MdeModulePkg/Bus/Usb/UsbMouseDxe/MouseHid.c index ec6a420..2594b7b 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseDxe/MouseHid.c +++ b/MdeModulePkg/Bus/Usb/UsbMouseDxe/MouseHid.c @@ -1,7 +1,7 @@ /** @file
Helper functions to parse HID report descriptor and items.
-Copyright (c) 2004 - 2010, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -160,7 +160,7 @@ GetItemData ( There are three item types: Main, Global, and Local.
This function parses these types of HID items according
to tag info.
-
+
@param UsbMouse The instance of USB_MOUSE_DEV
@param HidItem The HID item to parse
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.c b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.c index 0ad5616..9324994 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.c +++ b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.c @@ -1,7 +1,7 @@ /** @file
USB Mouse Driver that manages USB mouse and produces Simple Pointer Protocol.
-Copyright (c) 2004 - 2012, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -335,7 +335,7 @@ USBMouseDriverBindingStart ( );
goto ErrorExit;
}
-
+
UsbMouseDevice->ControllerNameTable = NULL;
AddUnicodeString2 (
"eng",
@@ -596,7 +596,7 @@ InitializeUsbMouseDevice ( Total = 0;
Start = FALSE;
- Head = (USB_DESC_HEAD *)Buf;
+ Head = (USB_DESC_HEAD *)Buf;
MouseHidDesc = NULL;
//
@@ -782,7 +782,7 @@ OnMouseInterruptComplete ( //
// Delete & Submit this interrupt again
- // Handler of DelayedRecoveryEvent triggered by timer will re-submit the interrupt.
+ // Handler of DelayedRecoveryEvent triggered by timer will re-submit the interrupt.
//
UsbIo->UsbAsyncInterruptTransfer (
UsbIo,
@@ -839,16 +839,16 @@ OnMouseInterruptComplete ( /**
Retrieves the current state of a pointer device.
-
- @param This A pointer to the EFI_SIMPLE_POINTER_PROTOCOL instance.
+
+ @param This A pointer to the EFI_SIMPLE_POINTER_PROTOCOL instance.
@param MouseState A pointer to the state information on the pointer device.
-
+
@retval EFI_SUCCESS The state of the pointer device was returned in State.
@retval EFI_NOT_READY The state of the pointer device has not changed since the last call to
- GetState().
+ GetState().
@retval EFI_DEVICE_ERROR A device error occurred while attempting to retrieve the pointer device's
- current state.
- @retval EFI_INVALID_PARAMETER MouseState is NULL.
+ current state.
+ @retval EFI_INVALID_PARAMETER MouseState is NULL.
**/
EFI_STATUS
@@ -892,13 +892,13 @@ GetMouseState ( }
-/**
+/**
Resets the pointer device hardware.
-
+
@param This A pointer to the EFI_SIMPLE_POINTER_PROTOCOL instance.
@param ExtendedVerification Indicates that the driver may perform a more exhaustive
verification operation of the device during reset.
-
+
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning correctly and could not be reset.
@@ -937,7 +937,7 @@ UsbMouseReset ( @param Event Event to be signaled when there's input from mouse.
@param Context Points to USB_MOUSE_DEV instance.
-
+
**/
VOID
EFIAPI
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.h b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.h index 0dab9de..b0484d9 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.h +++ b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouse.h @@ -1,7 +1,7 @@ /** @file
Helper routine and corresponding data struct used by USB Mouse Driver.
-Copyright (c) 2004 - 2012, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -310,16 +310,16 @@ UsbMouseComponentNameGetControllerName ( /**
Retrieves the current state of a pointer device.
-
- @param This A pointer to the EFI_SIMPLE_POINTER_PROTOCOL instance.
+
+ @param This A pointer to the EFI_SIMPLE_POINTER_PROTOCOL instance.
@param MouseState A pointer to the state information on the pointer device.
-
+
@retval EFI_SUCCESS The state of the pointer device was returned in State.
@retval EFI_NOT_READY The state of the pointer device has not changed since the last call to
- GetState().
+ GetState().
@retval EFI_DEVICE_ERROR A device error occurred while attempting to retrieve the pointer device's
- current state.
- @retval EFI_INVALID_PARAMETER MouseState is NULL.
+ current state.
+ @retval EFI_INVALID_PARAMETER MouseState is NULL.
**/
EFI_STATUS
@@ -329,13 +329,13 @@ GetMouseState ( OUT EFI_SIMPLE_POINTER_STATE *MouseState
);
-/**
+/**
Resets the pointer device hardware.
-
+
@param This A pointer to the EFI_SIMPLE_POINTER_PROTOCOL instance.
@param ExtendedVerification Indicates that the driver may perform a more exhaustive
verification operation of the device during reset.
-
+
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning correctly and could not be reset.
@@ -352,7 +352,7 @@ UsbMouseReset ( @param Event Event to be signaled when there's input from mouse.
@param Context Points to USB_MOUSE_DEV instance.
-
+
**/
VOID
EFIAPI
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf index 13d8859..5bea024 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf +++ b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf @@ -9,7 +9,7 @@ # 1. Universal Serial Bus HID Firmware Specification, ver 1.11
# 2. UEFI Specification, v2.1
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -36,7 +36,7 @@ #
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
-# DRIVER_BINDING = gUsbMouseDriverBinding
+# DRIVER_BINDING = gUsbMouseDriverBinding
# COMPONENT_NAME = gUsbMouseComponentName
# COMPONENT_NAME2 = gUsbMouseComponentName2
#
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.uni b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.uni index a7313ce..8d04b8e 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.uni +++ b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.uni @@ -9,13 +9,13 @@ // 1. Universal Serial Bus HID Firmware Specification, ver 1.11
// 2. UEFI Specification, v2.1
//
-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
-//
+//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
diff --git a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxeExtra.uni b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxeExtra.uni index 49769a9..28f3ea3 100644 --- a/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxeExtra.uni +++ b/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxeExtra.uni @@ -1,7 +1,7 @@ // /** @file
// UsbMouseDxe Localized Strings and Content
//
-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -13,8 +13,8 @@ //
// **/
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
"USB Mouse DXE Driver"
|