1 files changed, 0 insertions, 122 deletions
diff --git a/IntelFrameworkPkg/Include/Protocol/AcpiS3Save.h b/IntelFrameworkPkg/Include/Protocol/AcpiS3Save.h
deleted file mode 100644
index 67e6327..0000000
--- a/IntelFrameworkPkg/Include/Protocol/AcpiS3Save.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/** @file
-  This protocol is used to prepare all information that is needed for the S3 resume boot path. This
-  protocol is not required for all platforms.
-
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-  @par Revision Reference:
-  This Protocol is defined in Framework of S3 Resume Boot Path Spec.
-  Version 0.9.
-
-**/
-
-#ifndef _ACPI_S3_SAVE_PROTOCOL_H_
-#define _ACPI_S3_SAVE_PROTOCOL_H_
-
-//
-// Forward reference for pure ANSI compatability
-//
-typedef struct _EFI_ACPI_S3_SAVE_PROTOCOL EFI_ACPI_S3_SAVE_PROTOCOL;
-
-//
-// S3 Save Protocol GUID
-//
-#define EFI_ACPI_S3_SAVE_GUID \
-  { \
-    0x125f2de1, 0xfb85, 0x440c, {0xa5, 0x4c, 0x4d, 0x99, 0x35, 0x8a, 0x8d, 0x38 } \
-  }
-
-//
-// Protocol Data Structures
-//
-
-/**
-   This function is used to:
-
-  - Prepare all information that is needed in the S3 resume boot path. This information can include
-  the following:
-     -- Framework boot script table
-     -- RSDT pointer
-     -- Reserved memory for the S3 resume
-
-  - Get the minimum legacy memory length (meaning below 1 MB) that is required for the S3 resume boot path.
-  If LegacyMemoryAddress is NULL, the firmware will be unable to jump into a real-mode
-  waking vector. However, it might still be able to jump into a flat-mode waking vector as long as the
-  OS provides a flat-mode waking vector. It is the caller's responsibility to ensure the
-  LegacyMemoryAddress is valid. If the LegacyMemoryAddress is higher than 1 MB,
-  EFI_INVALID_PARAMETER will be returned.
-
-  @param  This                  A pointer to the EFI_ACPI_S3_SAVE_PROTOCOL instance.
-  @param  LegacyMemoryAddress   The base of legacy memory.
-
-  @retval EFI_SUCCESS           All information was saved successfully.
-  @retval EFI_INVALID_PARAMETER The memory range is not located below 1 MB.
-  @retval EFI_OUT_OF_RESOURCES  Resources were insufficient to save all the information.
-  @retval EFI_NOT_FOUND         Some necessary information cannot be found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_ACPI_S3_SAVE)(
-  IN EFI_ACPI_S3_SAVE_PROTOCOL      * This,
-  IN VOID                           * LegacyMemoryAddress
-  );
-
-/**
-  This function returns the size of the legacy memory (meaning below 1 MB) that is required during an S3
-  resume. Before the Framework-based firmware transfers control to the OS, it has to transition from
-  flat mode into real mode in case the OS supplies only a real-mode waking vector. This transition
-  requires a certain amount of legacy memory. After getting the size of legacy memory
-  below, the caller is responsible for allocating the legacy memory below 1 MB according to
-  the size that is returned. The specific implementation of allocating the legacy memory is out of the
-  scope of this specification.
-
-  @param  This                  A pointer to the EFI_ACPI_S3_SAVE_PROTOCOL instance.
-  @param  Size       The returned size of legacy memory below 1MB.
-
-  @retval EFI_SUCCESS           Size was successfully returned.
-  @retval EFI_INVALID_PARAMETER The pointer Size is NULL.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_ACPI_GET_LEGACY_MEMORY_SIZE)(
-  IN  EFI_ACPI_S3_SAVE_PROTOCOL     * This,
-  OUT UINTN                         * Size
-);
-
-/**
-  The EFI_ACPI_S3_SAVE_PROTOCOL is responsible for preparing all the information that the
-  Framework needs to restore the platform's preboot state during an S3 resume boot. This
-  information can include the following:
-    - The Framework boot script table, containing all necessary operations to initialize the platform.
-    - ACPI table information, such as RSDT, through which the OS waking vector can be located.
-    - The range of reserved memory that can be used on the S3 resume boot path.
-  This protocol can be used after the Framework makes sure that the boot process is complete and
-  that no hardware has been left unconfigured. Where to call this protocol to save information is implementation-specific.
-  In the case of an EFI-aware OS, ExitBootServices() can be a choice to provide this hook.
-  The currently executing EFI OS loader image calls ExitBootServices()to terminate all boot
-  services. After ExitBootServices() successfully completes, the loader becomes responsible
-  for the continued operation of the system.
-  On a normal boot, ExitBootServices() checks if the platform supports S3 by looking for
-  EFI_ACPI_S3_SAVE_PROTOCOL. If the protocol exists, ExitBootServices()will assume
-  that the target platform supports an S3 resume and then call EFI_ACPI_S3_SAVE_PROTOCOL
-  to save the S3 resume information. The entire Framework boot script table will then be generated,
-  assuming the platform currently is in the preboot state.
-**/
-struct _EFI_ACPI_S3_SAVE_PROTOCOL {
-  ///
-  /// Gets the size of legacy memory below 1 MB that is required for S3 resume.
-  ///
-  EFI_ACPI_GET_LEGACY_MEMORY_SIZE   GetLegacyMemorySize;
-
-  ///
-  /// Prepare all information for an S3 resume.
-  ///
-  EFI_ACPI_S3_SAVE                  S3Save;
-};
-
-extern EFI_GUID gEfiAcpiS3SaveProtocolGuid;
-
-#endif