diff options
Diffstat (limited to 'IntelFrameworkPkg/Include/Ppi/Smbus.h')
-rw-r--r-- | IntelFrameworkPkg/Include/Ppi/Smbus.h | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/IntelFrameworkPkg/Include/Ppi/Smbus.h b/IntelFrameworkPkg/Include/Ppi/Smbus.h deleted file mode 100644 index 8200e71..0000000 --- a/IntelFrameworkPkg/Include/Ppi/Smbus.h +++ /dev/null @@ -1,226 +0,0 @@ -/** @file
- This file declares the Smbus PPI, which provides the basic I/O interfaces that a PEIM
- uses to access its SMBus controller and the slave devices attached to it.
-
-Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
- @par Revision Reference:
- This PPI is defined in Framework of EFI SmBus PPI spec.
- Version 0.9.
-
-**/
-
-#ifndef _PEI_SMBUS_PPI_H_
-#define _PEI_SMBUS_PPI_H_
-
-#include <Ppi/Smbus2.h>
-
-#define EFI_PEI_SMBUS_PPI_GUID \
- { \
- 0xabd42895, 0x78cf, 0x4872, {0x84, 0x44, 0x1b, 0x5c, 0x18, 0xb, 0xfb, 0xda } \
- }
-
-typedef struct _EFI_PEI_SMBUS_PPI EFI_PEI_SMBUS_PPI;
-
-/**
- Executes an SMBus operation to an SMBus controller.
-
- @param[in] PeiServices A pointer to the system PEI Services Table.
- @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.
- @param[in] SlaveAddress The SMBUS hardware address to which the SMBUS
- device is preassigned or allocated.
- @param[in] Command This command is transmitted by the SMBus host
- controller to the SMBus slave device, and the
- interpretation is SMBus slave device specific.
- @param[in] Operation Signifies which particular SMBus hardware protocol
- instance to use to execute the SMBus transactions.
- @param[in] PecCheck Defines if Packet Error Code (PEC) checking is
- required for this operation.
- @param[in, out] Length The number of bytes for this operation.
- @param[in, out] Buffer Contains the value of data to execute to the SMBus
- slave device.
-
- @retval EFI_SUCCESS The last data that was returned from the access
- matched the poll exit criteria.
- @retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect).
- @retval EFI_TIMEOUT Timeout expired before the operation was completed.
- Timeout is determined by the SMBus host controller device.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed
- due to a lack of resources.
- @retval EFI_DEVICE_ERROR The request was not completed because a failure
- was recorded in the Host Status Register bit.
- @retval EFI_INVALID_PARAMETER The operation is not defined in EFI_SMBUS_OPERATION.
- @retval EFI_INVALID_PARAMETER Length/Buffer is NULL for operations except for
- EfiSmbusQuickRead and EfiSmbusQuickWrite. Length
- is outside the range of valid values.
- @retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.
- @retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION)(
- IN EFI_PEI_SERVICES **PeiServices,
- IN EFI_PEI_SMBUS_PPI *This,
- IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
- IN EFI_SMBUS_DEVICE_COMMAND Command,
- IN EFI_SMBUS_OPERATION Operation,
- IN BOOLEAN PecCheck,
- IN OUT UINTN *Length,
- IN OUT VOID *Buffer
- );
-
-/**
- This function is user-defined, and is called when the SlaveAddress/Data pair happens.
-
- @param[in] PeiServices A pointer to the system PEI Services Table.
- @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.
- @param[in] SlaveAddress The SMBUS hardware address to which the SMBUS
- device is preassigned or allocated.
- @param[in] Data Data of the SMBus host notify command, which denotes that
- the caller wants to be called.
-
- @return Status Code returned by callback function.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PEI_SMBUS_NOTIFY_FUNCTION)(
- IN EFI_PEI_SERVICES **PeiServices,
- IN EFI_PEI_SMBUS_PPI *SmbusPpi,
- IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
- IN UINTN Data
- );
-
-/**
- The ArpDevice() function enumerates either the entire bus or a specific
- device identified by SmbusUdid.
-
- @param[in] PeiServices A pointer to the system PEI Services Table.
- @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.
- @param[in] ArpAll A Boolean expression that indicates if the host
- drivers need to enumerate all the devices or to
- enumerate only the device that is identified
- by SmbusUdid. If ArpAll is TRUE, SmbusUdid and
- SlaveAddress are optional and ignored if entered.
- If ArpAll is FALSE, ArpDevice will enumerate
- SmbusUdid, and the address will be at SlaveAddress.
- @param[in] SmbusUdid The targeted SMBus Unique Device Identifier (UDID).
- The UDID may not exist for SMBus devices with fixed
- addresses.
- @param[in, out] SlaveAddress The new SMBus address for the slave device for
- which the operation is targeted.
- This address may be NULL.
-
- @retval EFI_SUCCESS The SMBus slave device address was set.
- @retval EFI_INVALID_PARAMETER SlaveAddress is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed
- due to a lack of resources.
- @retval EFI_TIMEOUT The SMBus slave device did not respond.
- @retval EFI_DEVICE_ERROR The request was not completed because the transaction failed.
- @retval EFI_UNSUPPORTED ArpDevice() is not implemented by this PEIM.
- This return value is not defined in the Framework Specification.
- This return value was introduced in the PI Specification.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PEI_SMBUS_PPI_ARP_DEVICE)(
- IN EFI_PEI_SERVICES **PeiServices,
- IN EFI_PEI_SMBUS_PPI *This,
- IN BOOLEAN ArpAll,
- IN EFI_SMBUS_UDID *SmbusUdid, OPTIONAL
- IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL
- );
-
-/**
- The GetArpMap() function returns the mapping of all the SMBus devices
- that are enumerated by the SMBus host driver.
-
- @param[in] PeiServices A pointer to the system PEI Services Table.
- @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.
- @param[in, out] Length The size of the buffer that contains the SMBus device map.
- @param[in, out] SmbusDeviceMap The pointer to the device map as enumerated
- by the SMBus controller driver.
-
- @retval EFI_SUCCESS The device map was returned correctly in the buffer.
- @retval EFI_UNSUPPORTED GetArpMap() are not implemented by this PEIM.
- This return value was not defined in the Framework Specification.
- This return value was introduced in the PI Specification.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PEI_SMBUS_PPI_GET_ARP_MAP)(
- IN EFI_PEI_SERVICES **PeiServices,
- IN EFI_PEI_SMBUS_PPI *This,
- IN OUT UINTN *Length,
- IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap
- );
-
-/**
- Allows a device driver to register for a callback when the bus driver detects a state that it needs to
- propagate to other PEIMs that are registered for a callback.
-
- The Notify() function registers all the callback functions to allow the
- bus driver to call these functions when the SlaveAddress/Data pair occur.
- All functions to be registered with EFI_PEI_SMBUS_PPI_NOTIFY must be of type
- EFI_PEI_SMBUS_NOTIFY_FUNCTION.
-
- @param[in] PeiServices A pointer to the system PEI Services Table.
- @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.
- @param[in] SlaveAddress The address that the host controller detects as
- sending a message and triggers all the registered functions.
- @param[in] Data Data that the host controller detects as sending a message
- and triggers all the registered functions.
- @param[in] NotifyFunction The function to call when the bus driver
- detects the SlaveAddress and Data pair.
-
- @retval EFI_SUCCESS NotifyFunction has been registered.
- @retval EFI_UNSUPPORTED Notify() are not implemented by this PEIM.
- This return value is not defined in the Framework Specification.
- This return value was introduced in the PI Specification.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PEI_SMBUS_PPI_NOTIFY)(
- IN EFI_PEI_SERVICES **PeiServices,
- IN EFI_PEI_SMBUS_PPI *This,
- IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
- IN UINTN Data,
- IN EFI_PEI_SMBUS_NOTIFY_FUNCTION NotifyFunction
- );
-
-///
-/// Provides the basic I/O interfaces that a PEIM uses to access
-/// its SMBus controller and the slave devices attached to it.
-///
-struct _EFI_PEI_SMBUS_PPI {
- ///
- /// Executes the SMBus operation to an SMBus slave device.
- ///
- EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION Execute;
-
- ///
- /// Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)
- ///
- EFI_PEI_SMBUS_PPI_ARP_DEVICE ArpDevice;
-
- ///
- /// Allows a PEIM to retrieve the address that was allocated by the SMBus
- /// host controller during enumeration/ARP.
- ///
- EFI_PEI_SMBUS_PPI_GET_ARP_MAP GetArpMap;
-
- ///
- /// Allows a driver to register for a callback to the SMBus host
- /// controller driver when the bus issues a notification to the bus controller PEIM.
- ///
- EFI_PEI_SMBUS_PPI_NOTIFY Notify;
-};
-
-extern EFI_GUID gEfiPeiSmbusPpiGuid;
-
-#endif
|