diff options
Diffstat (limited to 'ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c')
-rw-r--r-- | ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c | 395 |
1 files changed, 0 insertions, 395 deletions
diff --git a/ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c b/ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c deleted file mode 100644 index 7ae25e9..0000000 --- a/ArmPlatformPkg/Drivers/SP804TimerDxe/SP804Timer.c +++ /dev/null @@ -1,395 +0,0 @@ -/** @file
- Template for Timer Architecture Protocol driver of the ARM flavor
-
- Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
- Copyright (c) 2011 - 2012, ARM Ltd. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include <PiDxe.h>
-
-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-
-#include <Protocol/Timer.h>
-#include <Protocol/HardwareInterrupt.h>
-
-#include <Drivers/SP804Timer.h>
-
-#define SP804_TIMER_PERIODIC_BASE ((UINTN)PcdGet32 (PcdSP804TimerPeriodicBase))
-#define SP804_TIMER_METRONOME_BASE ((UINTN)PcdGet32 (PcdSP804TimerMetronomeBase))
-#define SP804_TIMER_PERFORMANCE_BASE ((UINTN)PcdGet32 (PcdSP804TimerPerformanceBase))
-
-// The notification function to call on every timer interrupt.
-EFI_TIMER_NOTIFY mTimerNotifyFunction = (EFI_TIMER_NOTIFY)NULL;
-EFI_EVENT EfiExitBootServicesEvent = (EFI_EVENT)NULL;
-
-// The current period of the timer interrupt
-UINT64 mTimerPeriod = 0;
-
-// Cached copy of the Hardware Interrupt protocol instance
-EFI_HARDWARE_INTERRUPT_PROTOCOL *gInterrupt = NULL;
-
-// Cached interrupt vector
-UINTN gVector;
-
-
-/**
-
- C Interrupt Handler called in the interrupt context when Source interrupt is active.
-
-
- @param Source Source of the interrupt. Hardware routing off a specific platform defines
- what source means.
-
- @param SystemContext Pointer to system register context. Mostly used by debuggers and will
- update the system context after the return from the interrupt if
- modified. Don't change these values unless you know what you are doing
-
-**/
-VOID
-EFIAPI
-TimerInterruptHandler (
- IN HARDWARE_INTERRUPT_SOURCE Source,
- IN EFI_SYSTEM_CONTEXT SystemContext
- )
-{
- EFI_TPL OriginalTPL;
-
- //
- // DXE core uses this callback for the EFI timer tick. The DXE core uses locks
- // that raise to TPL_HIGH and then restore back to current level. Thus we need
- // to make sure TPL level is set to TPL_HIGH while we are handling the timer tick.
- //
- OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-
- // If the interrupt is shared then we must check if this interrupt source is the one associated to this Timer
- if (MmioRead32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_MSK_INT_STS_REG) != 0) {
- // Clear the periodic interrupt
- MmioWrite32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_INT_CLR_REG, 0);
-
- // Signal end of interrupt early to help avoid losing subsequent ticks from long duration handlers
- gInterrupt->EndOfInterrupt (gInterrupt, Source);
-
- if (mTimerNotifyFunction) {
- mTimerNotifyFunction (mTimerPeriod);
- }
- }
-
- gBS->RestoreTPL (OriginalTPL);
-}
-
-/**
- This function registers the handler NotifyFunction so it is called every time
- the timer interrupt fires. It also passes the amount of time since the last
- handler call to the NotifyFunction. If NotifyFunction is NULL, then the
- handler is unregistered. If the handler is registered, then EFI_SUCCESS is
- returned. If the CPU does not support registering a timer interrupt handler,
- then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
- when a handler is already registered, then EFI_ALREADY_STARTED is returned.
- If an attempt is made to unregister a handler when a handler is not registered,
- then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
- register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
- is returned.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
- @param NotifyFunction The function to call when a timer interrupt fires. This
- function executes at TPL_HIGH_LEVEL. The DXE Core will
- register a handler for the timer interrupt, so it can know
- how much time has passed. This information is used to
- signal timer based events. NULL will unregister the handler.
- @retval EFI_SUCCESS The timer handler was registered.
- @retval EFI_UNSUPPORTED The platform does not support timer interrupts.
- @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
- registered.
- @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
- previously registered.
- @retval EFI_DEVICE_ERROR The timer handler could not be registered.
-
-**/
-EFI_STATUS
-EFIAPI
-TimerDriverRegisterHandler (
- IN EFI_TIMER_ARCH_PROTOCOL *This,
- IN EFI_TIMER_NOTIFY NotifyFunction
- )
-{
- if ((NotifyFunction == NULL) && (mTimerNotifyFunction == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((NotifyFunction != NULL) && (mTimerNotifyFunction != NULL)) {
- return EFI_ALREADY_STARTED;
- }
-
- mTimerNotifyFunction = NotifyFunction;
-
- return EFI_SUCCESS;
-}
-
-/**
- Make sure all Dual Timers are disabled
-**/
-VOID
-EFIAPI
-ExitBootServicesEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- // Disable 'Periodic Operation' timer if enabled
- if (MmioRead32(SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
- MmioAnd32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, 0);
- }
-
- // Disable 'Metronome/Delay' timer if enabled
- if (MmioRead32(SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
- MmioAnd32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, 0);
- }
-
- // Disable 'Performance' timer if enabled
- if (MmioRead32(SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
- MmioAnd32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, 0);
- }
-}
-
-/**
-
- This function adjusts the period of timer interrupts to the value specified
- by TimerPeriod. If the timer period is updated, then the selected timer
- period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
- the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
- If an error occurs while attempting to update the timer period, then the
- timer hardware will be put back in its state prior to this call, and
- EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
- is disabled. This is not the same as disabling the CPU's interrupts.
- Instead, it must either turn off the timer hardware, or it must adjust the
- interrupt controller so that a CPU interrupt is not generated when the timer
- interrupt fires.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
- @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If
- the timer hardware is not programmable, then EFI_UNSUPPORTED is
- returned. If the timer is programmable, then the timer period
- will be rounded up to the nearest timer period that is supported
- by the timer hardware. If TimerPeriod is set to 0, then the
- timer interrupts will be disabled.
-
-
- @retval EFI_SUCCESS The timer period was changed.
- @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
- @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
-
-**/
-EFI_STATUS
-EFIAPI
-TimerDriverSetTimerPeriod (
- IN EFI_TIMER_ARCH_PROTOCOL *This,
- IN UINT64 TimerPeriod
- )
-{
- EFI_STATUS Status;
- UINT64 TimerTicks;
-
- // always disable the timer
- MmioAnd32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, ~SP804_TIMER_CTRL_ENABLE);
-
- if (TimerPeriod == 0) {
- // Leave timer disabled from above, and...
-
- // Disable timer 0/1 interrupt for a TimerPeriod of 0
- Status = gInterrupt->DisableInterruptSource (gInterrupt, gVector);
- } else {
- // Convert TimerPeriod into 1MHz clock counts (us units = 100ns units * 10)
- TimerTicks = DivU64x32 (TimerPeriod, 10);
- TimerTicks = MultU64x32 (TimerTicks, PcdGet32(PcdSP804TimerFrequencyInMHz));
-
- // if it's larger than 32-bits, pin to highest value
- if (TimerTicks > 0xffffffff) {
- TimerTicks = 0xffffffff;
- }
-
- // Program the SP804 timer with the new count value
- MmioWrite32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_LOAD_REG, TimerTicks);
-
- // enable the timer
- MmioOr32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
-
- // enable timer 0/1 interrupts
- Status = gInterrupt->EnableInterruptSource (gInterrupt, gVector);
- }
-
- // Save the new timer period
- mTimerPeriod = TimerPeriod;
- return Status;
-}
-
-/**
- This function retrieves the period of timer interrupts in 100 ns units,
- returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
- is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
- returned, then the timer is currently disabled.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
- @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If
- 0 is returned, then the timer is currently disabled.
-
-
- @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
- @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-TimerDriverGetTimerPeriod (
- IN EFI_TIMER_ARCH_PROTOCOL *This,
- OUT UINT64 *TimerPeriod
- )
-{
- if (TimerPeriod == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- *TimerPeriod = mTimerPeriod;
- return EFI_SUCCESS;
-}
-
-/**
- This function generates a soft timer interrupt. If the platform does not support soft
- timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
- If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
- service, then a soft timer interrupt will be generated. If the timer interrupt is
- enabled when this service is called, then the registered handler will be invoked. The
- registered handler should not be able to distinguish a hardware-generated timer
- interrupt from a software-generated timer interrupt.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
-
- @retval EFI_SUCCESS The soft timer interrupt was generated.
- @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.
-
-**/
-EFI_STATUS
-EFIAPI
-TimerDriverGenerateSoftInterrupt (
- IN EFI_TIMER_ARCH_PROTOCOL *This
- )
-{
- return EFI_UNSUPPORTED;
-}
-
-/**
- Interface structure for the Timer Architectural Protocol.
-
- @par Protocol Description:
- This protocol provides the services to initialize a periodic timer
- interrupt, and to register a handler that is called each time the timer
- interrupt fires. It may also provide a service to adjust the rate of the
- periodic timer interrupt. When a timer interrupt occurs, the handler is
- passed the amount of time that has passed since the previous timer
- interrupt.
-
- @param RegisterHandler
- Registers a handler that will be called each time the
- timer interrupt fires. TimerPeriod defines the minimum
- time between timer interrupts, so TimerPeriod will also
- be the minimum time between calls to the registered
- handler.
-
- @param SetTimerPeriod
- Sets the period of the timer interrupt in 100 nS units.
- This function is optional, and may return EFI_UNSUPPORTED.
- If this function is supported, then the timer period will
- be rounded up to the nearest supported timer period.
-
-
- @param GetTimerPeriod
- Retrieves the period of the timer interrupt in 100 nS units.
-
- @param GenerateSoftInterrupt
- Generates a soft timer interrupt that simulates the firing of
- the timer interrupt. This service can be used to invoke the registered handler if the timer interrupt has been masked for
- a period of time.
-
-**/
-EFI_TIMER_ARCH_PROTOCOL gTimer = {
- TimerDriverRegisterHandler,
- TimerDriverSetTimerPeriod,
- TimerDriverGetTimerPeriod,
- TimerDriverGenerateSoftInterrupt
-};
-
-
-/**
- Initialize the state information for the Timer Architectural Protocol and
- the Timer Debug support protocol that allows the debugger to break into a
- running program.
-
- @param ImageHandle of the loaded driver
- @param SystemTable Pointer to the System Table
-
- @retval EFI_SUCCESS Protocol registered
- @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
- @retval EFI_DEVICE_ERROR Hardware problems
-
-**/
-EFI_STATUS
-EFIAPI
-TimerInitialize (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_HANDLE Handle = NULL;
- EFI_STATUS Status;
-
- // Set the interrupt timer number
- gVector = PcdGet32(PcdSP804TimerPeriodicInterruptNum);
-
- // Find the interrupt controller protocol. ASSERT if not found.
- Status = gBS->LocateProtocol (&gHardwareInterruptProtocolGuid, NULL, (VOID **)&gInterrupt);
- ASSERT_EFI_ERROR (Status);
-
- // Disable the timer
- Status = TimerDriverSetTimerPeriod (&gTimer, 0);
- ASSERT_EFI_ERROR (Status);
-
- // Install interrupt handler
- Status = gInterrupt->RegisterInterruptSource (gInterrupt, gVector, TimerInterruptHandler);
- ASSERT_EFI_ERROR (Status);
-
- // configure timer 0 for periodic operation, 32 bits, no prescaler, and interrupt enabled
- MmioWrite32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_PERIODIC | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1 | SP804_TIMER_CTRL_INT_ENABLE);
-
- // Set up default timer
- Status = TimerDriverSetTimerPeriod (&gTimer, FixedPcdGet32(PcdTimerPeriod)); // TIMER_DEFAULT_PERIOD
- ASSERT_EFI_ERROR (Status);
-
- // Install the Timer Architectural Protocol onto a new handle
- Status = gBS->InstallMultipleProtocolInterfaces(
- &Handle,
- &gEfiTimerArchProtocolGuid, &gTimer,
- NULL
- );
- ASSERT_EFI_ERROR(Status);
-
- // Register for an ExitBootServicesEvent
- Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY, ExitBootServicesEvent, NULL, &EfiExitBootServicesEvent);
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
|