diff options
-rw-r--r-- | MdePkg/Include/IndustryStandard/Scsi.h | 5 | ||||
-rw-r--r-- | MdePkg/Include/Protocol/ScsiIo.h | 2 | ||||
-rw-r--r-- | MdePkg/Library/UefiScsiLib/EdkScsiLib.msa | 43 | ||||
-rw-r--r-- | MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 677 | ||||
-rw-r--r-- | MdePkg/Library/UefiScsiLib/UefiScsiLib.inf | 79 | ||||
-rw-r--r-- | MdePkg/MdePkg.dsc | 2 |
6 files changed, 806 insertions, 2 deletions
diff --git a/MdePkg/Include/IndustryStandard/Scsi.h b/MdePkg/Include/IndustryStandard/Scsi.h index b8cca5f..86f454f 100644 --- a/MdePkg/Include/IndustryStandard/Scsi.h +++ b/MdePkg/Include/IndustryStandard/Scsi.h @@ -277,4 +277,9 @@ typedef struct { //
#define EFI_SCSI_ASCQ_IN_PROGRESS (0x01)
+//
+// Max bytes needed to represent ID of a SCSI device
+//
+#define EFI_SCSI_TARGET_MAX_BYTES (0x10)
+
#endif
diff --git a/MdePkg/Include/Protocol/ScsiIo.h b/MdePkg/Include/Protocol/ScsiIo.h index d20f953..1e03705 100644 --- a/MdePkg/Include/Protocol/ScsiIo.h +++ b/MdePkg/Include/Protocol/ScsiIo.h @@ -222,7 +222,7 @@ struct _EFI_SCSI_IO_PROTOCOL { EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION GetDeviceLocation;
EFI_SCSI_IO_PROTOCOL_RESET_BUS ResetBus;
EFI_SCSI_IO_PROTOCOL_RESET_DEVICE ResetDevice;
- EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_COMMAND ExecuteSCSICommand;
+ EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_COMMAND ExecuteScsiCommand;
UINT32 IoAlign;
};
diff --git a/MdePkg/Library/UefiScsiLib/EdkScsiLib.msa b/MdePkg/Library/UefiScsiLib/EdkScsiLib.msa new file mode 100644 index 0000000..1135e4a --- /dev/null +++ b/MdePkg/Library/UefiScsiLib/EdkScsiLib.msa @@ -0,0 +1,43 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+ <MsaHeader>
+ <ModuleName>EdkScsiLib</ModuleName>
+ <ModuleType>DXE_DRIVER</ModuleType>
+ <GuidValue>46c9adef-aee6-410c-99e4-240e3af18d8b</GuidValue>
+ <Version>1.0</Version>
+ <Abstract>Component description file for Scsi Dxe Library.</Abstract>
+ <Description>this Libarary implements Scsi command.</Description>
+ <Copyright>Copyright (c) 2006, Intel Corporation.</Copyright>
+ <License>All rights reserved. This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
+ <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
+ </MsaHeader>
+ <ModuleDefinitions>
+ <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
+ <BinaryModule>false</BinaryModule>
+ <OutputFileBasename>EdkScsiLib</OutputFileBasename>
+ </ModuleDefinitions>
+ <LibraryClassDefinitions>
+ <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER">
+ <Keyword>EdkScsiLib</Keyword>
+ </LibraryClass>
+ <LibraryClass Usage="ALWAYS_CONSUMED">
+ <Keyword>BaseMemoryLib</Keyword>
+ </LibraryClass>
+ </LibraryClassDefinitions>
+ <SourceFiles>
+ <Filename>ScsiLib.c</Filename>
+ </SourceFiles>
+ <PackageDependencies>
+ <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
+ <Package PackageGuid="68169ab0-d41b-4009-9060-292c253ac43d"/>
+ </PackageDependencies>
+ <Externs>
+ <Specification>EFI_SPECIFICATION_VERSION 0x00010010</Specification>
+ <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
+ </Externs>
+</ModuleSurfaceArea>
\ No newline at end of file diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c new file mode 100644 index 0000000..ef6a4eb --- /dev/null +++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c @@ -0,0 +1,677 @@ +/*++
+
+Copyright (c) 2006, Intel Corporation
+All rights reserved. This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+Module Name:
+
+ ScsiLib.c
+
+Abstract:
+
+
+Revision History
+--*/
+
+//
+// The package level header files this module uses
+//
+#include <PiDxe.h>
+
+//
+// The protocols, PPI and GUID defintions for this module
+//
+//
+// The Library classes this module consumes
+//
+#include <Library/ScsiLib.h>
+#include <Library/BaseMemoryLib.h>
+
+#include <IndustryStandard/scsi.h>
+
+EFI_STATUS
+SubmitTestUnitReadyCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ OUT VOID *SenseData,
+ OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus
+ )
+/*++
+
+Routine Description:
+ Function tests the ready status of SCSI unit.
+
+Arguments:
+ ScsiIo - A pointer to SCSI IO protocol.
+ Timeout - The length of timeout period.
+ SenseData - A pointer to output sense data.
+ SenseDataLength - The length of output sense data.
+ HostAdapterStatus - The status of Host Adapter.
+ TargetStatus - The status of the target.
+
+Returns:
+
+ Returns:
+ EFI_SUCCESS - The status of the unit is tested successfully.
+ EFI_BAD_BUFFER_SIZE - The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be transferred.
+ The actual number of bytes transferred is returned
+ in InTransferLength.
+ EFI_NOT_READY - The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
+ queued.
+ EFI_DEVICE_ERROR - A device error occurred while attempting to send
+ the SCSI Request Packet.
+ EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
+ EFI_UNSUPPORTED - The command described by the SCSI Request Packet
+ is not supported by the SCSI initiator(i.e., SCSI
+ Host Controller).
+ EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
+ Request Packet to execute.
+
+--*/
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT64 Lun;
+ UINT8 *Target;
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];
+ EFI_STATUS Status;
+ UINT8 Cdb[6];
+
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 6);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = NULL;
+ CommandPacket.InTransferLength= 0;
+ CommandPacket.OutDataBuffer = NULL;
+ CommandPacket.OutTransferLength= 0;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Test Unit Ready Command
+ //
+ Target = &TargetArray[0];
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);
+
+ Cdb[0] = EFI_SCSI_OP_TEST_UNIT_READY;
+ Cdb[1] = (UINT8) (Lun & 0xe0);
+ CommandPacket.CdbLength = (UINT8) 6;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+
+ return Status;
+}
+
+EFI_STATUS
+SubmitInquiryCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN VOID *SenseData,
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN OUT VOID *InquiryDataBuffer,
+ IN OUT UINT32 *InquiryDataLength,
+ IN BOOLEAN EnableVitalProductData
+ )
+/*++
+
+Routine Description:
+ Function to submit SCSI inquiry command.
+
+Arguments:
+ ScsiIo - A pointer to SCSI IO protocol.
+ Timeout - The length of timeout period.
+ SenseData - A pointer to output sense data.
+ SenseDataLength - The length of output sense data.
+ HostAdapterStatus - The status of Host Adapter.
+ TargetStatus - The status of the target.
+ InquiryDataBuffer - A pointer to inquiry data buffer.
+ InquiryDataLength - The length of inquiry data buffer.
+ EnableVitalProductData - Boolean to enable Vital Product Data.
+
+Returns:
+
+ Returns:
+ EFI_SUCCESS - The status of the unit is tested successfully.
+ EFI_BAD_BUFFER_SIZE - The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be transferred.
+ The actual number of bytes transferred is returned
+ in TransferLength.
+ EFI_NOT_READY - The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
+ queued.
+ EFI_DEVICE_ERROR - A device error occurred while attempting to send
+ the SCSI Request Packet.
+ EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
+ EFI_UNSUPPORTED - The command described by the SCSI Request Packet
+ is not supported by the SCSI initiator(i.e., SCSI
+ Host Controller).
+ EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
+ Request Packet to execute.
+
+--*/
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT64 Lun;
+ UINT8 *Target;
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];
+ EFI_STATUS Status;
+ UINT8 Cdb[6];
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 6);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = InquiryDataBuffer;
+ CommandPacket.InTransferLength= *InquiryDataLength;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+ CommandPacket.Cdb = Cdb;
+
+ Target = &TargetArray[0];
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);
+
+ Cdb[0] = EFI_SCSI_OP_INQUIRY;
+ Cdb[1] = (UINT8) (Lun & 0xe0);
+ if (EnableVitalProductData) {
+ Cdb[1] |= 0x01;
+ }
+
+ if (*InquiryDataLength > 0xff) {
+ *InquiryDataLength = 0xff;
+ }
+
+ Cdb[4] = (UINT8) (*InquiryDataLength);
+ CommandPacket.CdbLength = (UINT8) 6;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+ *InquiryDataLength = CommandPacket.InTransferLength;
+
+ return Status;
+}
+
+EFI_STATUS
+SubmitModeSense10Command (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN VOID *SenseData,
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN VOID *DataBuffer,
+ IN OUT UINT32 *DataLength,
+ IN UINT8 DBDField, OPTIONAL
+ IN UINT8 PageControl,
+ IN UINT8 PageCode
+ )
+/*++
+
+Routine Description:
+ Function to submit SCSI mode sense 10 command.
+
+Arguments:
+ ScsiIo - A pointer to SCSI IO protocol.
+ Timeout - The length of timeout period.
+ SenseData - A pointer to output sense data.
+ SenseDataLength - The length of output sense data.
+ HostAdapterStatus - The status of Host Adapter.
+ TargetStatus - The status of the target.
+ DataBuffer - A pointer to input data buffer.
+ DataLength - The length of input data buffer.
+ DBDField - The DBD Field (Optional).
+ PageControl - Page Control.
+ PageCode - Page code.
+
+Returns:
+
+ Returns:
+ EFI_SUCCESS - The status of the unit is tested successfully.
+ EFI_WARN_BUFFER_TOO_SMALL - The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be transferred.
+ The actual number of bytes transferred is returned
+ in TransferLength.
+ EFI_NOT_READY - The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
+ queued.
+ EFI_DEVICE_ERROR - A device error occurred while attempting to send
+ the SCSI Request Packet.
+ EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
+ EFI_UNSUPPORTED - The command described by the SCSI Request Packet
+ is not supported by the SCSI initiator(i.e., SCSI
+ Host Controller).
+ EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
+ Request Packet to execute.
+
+--*/
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT64 Lun;
+ UINT8 *Target;
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];
+ EFI_STATUS Status;
+ UINT8 Cdb[10];
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 10);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.InTransferLength= *DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Mode Sense (10) Command
+ //
+ Target = &TargetArray[0];
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);
+
+ Cdb[0] = EFI_SCSI_OP_MODE_SEN10;
+ Cdb[1] = (UINT8) (Lun & 0xe0 + (DBDField << 3) & 0x08);
+ Cdb[2] = (UINT8) ((PageControl & 0xc0) | (PageCode & 0x3f));
+ Cdb[7] = (UINT8) (*DataLength >> 8);
+ Cdb[8] = (UINT8) (*DataLength);
+
+ CommandPacket.CdbLength = 10;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+ *DataLength = CommandPacket.InTransferLength;
+
+ return Status;
+}
+
+EFI_STATUS
+SubmitRequestSenseCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN VOID *SenseData,
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus
+ )
+/*++
+
+Routine Description:
+ Function to submit SCSI request sense command.
+
+Arguments:
+ ScsiIo - A pointer to SCSI IO protocol.
+ Timeout - The length of timeout period.
+ SenseData - A pointer to output sense data.
+ SenseDataLength - The length of output sense data.
+ HostAdapterStatus - The status of Host Adapter.
+ TargetStatus - The status of the target.
+
+Returns:
+
+ Returns:
+ EFI_SUCCESS - The status of the unit is tested successfully.
+ EFI_WARN_BUFFER_TOO_SMALL - The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be transferred.
+ The actual number of bytes transferred is returned
+ in TransferLength.
+ EFI_NOT_READY - The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
+ queued.
+ EFI_DEVICE_ERROR - A device error occurred while attempting to send
+ the SCSI Request Packet.
+ EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
+ EFI_UNSUPPORTED - The command described by the SCSI Request Packet
+ is not supported by the SCSI initiator(i.e., SCSI
+ Host Controller).
+ EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
+ Request Packet to execute.
+
+--*/
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT64 Lun;
+ UINT8 *Target;
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];
+ EFI_STATUS Status;
+ UINT8 Cdb[6];
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 6);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = SenseData;
+ CommandPacket.SenseData = NULL;
+ CommandPacket.InTransferLength= *SenseDataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Request Sense Command
+ //
+ Target = &TargetArray[0];
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);
+
+ Cdb[0] = EFI_SCSI_OP_REQUEST_SENSE;
+ Cdb[1] = (UINT8) (Lun & 0xe0);
+ Cdb[4] = (UINT8) (*SenseDataLength);
+
+ CommandPacket.CdbLength = (UINT8) 6;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
+ CommandPacket.SenseDataLength = 0;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = (UINT8) CommandPacket.InTransferLength;
+
+ return Status;
+}
+
+EFI_STATUS
+SubmitReadCapacityCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN VOID *SenseData,
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ OUT VOID *DataBuffer,
+ IN OUT UINT32 *DataLength,
+ IN BOOLEAN PMI
+ )
+/*++
+
+Routine Description:
+ Function to submit read capacity command.
+
+Arguments:
+ ScsiIo - A pointer to SCSI IO protocol.
+ Timeout - The length of timeout period.
+ SenseData - A pointer to output sense data.
+ SenseDataLength - The length of output sense data.
+ HostAdapterStatus - The status of Host Adapter.
+ TargetStatus - The status of the target.
+ DataBuffer - A pointer to a data buffer.
+ DataLength - The length of data buffer.
+ PMI - Partial medium indicator.
+
+Returns:
+
+ Returns:
+ EFI_SUCCESS - The status of the unit is tested successfully.
+ EFI_WARN_BUFFER_TOO_SMALL - The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be transferred.
+ The actual number of bytes transferred is returned
+ in TransferLength.
+ EFI_NOT_READY - The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
+ queued.
+ EFI_DEVICE_ERROR - A device error occurred while attempting to send
+ the SCSI Request Packet.
+ EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
+ EFI_UNSUPPORTED - The command described by the SCSI Request Packet
+ is not supported by the SCSI initiator(i.e., SCSI
+ Host Controller).
+ EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
+ Request Packet to execute.
+
+--*/
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT64 Lun;
+ UINT8 *Target;
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];
+ EFI_STATUS Status;
+ UINT8 Cdb[10];
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 10);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.InTransferLength= *DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Read Capacity Command
+ //
+ Target = &TargetArray[0];
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);
+
+ Cdb[0] = EFI_SCSI_OP_READ_CAPACITY;
+ Cdb[1] = (UINT8) (Lun & 0xe0);
+ if (!PMI) {
+ //
+ // Partial medium indicator,if PMI is FALSE, the Cdb.2 ~ Cdb.5 MUST BE ZERO.
+ //
+ ZeroMem ((Cdb + 2), 4);
+ } else {
+ Cdb[8] |= 0x01;
+ }
+
+ CommandPacket.CdbLength = 10;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+ *DataLength = CommandPacket.InTransferLength;
+
+ return Status;
+}
+
+EFI_STATUS
+SubmitRead10Command (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN VOID *SenseData,
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ OUT VOID *DataBuffer,
+ IN OUT UINT32 *DataLength,
+ IN UINT32 StartLba,
+ IN UINT32 SectorSize
+ )
+/*++
+
+Routine Description:
+ Function to submit read 10 command.
+
+Arguments:
+ ScsiIo - A pointer to SCSI IO protocol.
+ Timeout - The length of timeout period.
+ SenseData - A pointer to output sense data.
+ SenseDataLength - The length of output sense data.
+ HostAdapterStatus - The status of Host Adapter.
+ TargetStatus - The status of the target.
+ DataBuffer - A pointer to a data buffer.
+ DataLength - The length of data buffer.
+ StartLba - The start address of LBA.
+ SectorSize - The sector size.
+
+Returns:
+
+ Returns:
+ EFI_SUCCESS - The status of the unit is tested successfully.
+ EFI_WARN_BUFFER_TOO_SMALL - The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be transferred.
+ The actual number of bytes transferred is returned
+ in TransferLength.
+ EFI_NOT_READY - The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
+ queued.
+ EFI_DEVICE_ERROR - A device error occurred while attempting to send
+ the SCSI Request Packet.
+ EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
+ EFI_UNSUPPORTED - The command described by the SCSI Request Packet
+ is not supported by the SCSI initiator(i.e., SCSI
+ Host Controller).
+ EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
+ Request Packet to execute.
+
+--*/
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT64 Lun;
+ UINT8 *Target;
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];
+ EFI_STATUS Status;
+ UINT8 Cdb[10];
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 10);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.InTransferLength= *DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Read (10) Command
+ //
+ Target = &TargetArray[0];
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);
+
+ Cdb[0] = EFI_SCSI_OP_READ10;
+ Cdb[1] = (UINT8) (Lun & 0xe0);
+ Cdb[2] = (UINT8) (StartLba >> 24);
+ Cdb[3] = (UINT8) (StartLba >> 16);
+ Cdb[4] = (UINT8) (StartLba >> 8);
+ Cdb[5] = (UINT8) (StartLba & 0xff);
+ Cdb[7] = (UINT8) (SectorSize >> 8);
+ Cdb[8] = (UINT8) (SectorSize & 0xff);
+
+ CommandPacket.CdbLength = 10;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+ *DataLength = CommandPacket.InTransferLength;
+
+ return Status;
+}
+
+EFI_STATUS
+SubmitWrite10Command (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN VOID *SenseData,
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ OUT VOID *DataBuffer,
+ IN OUT UINT32 *DataLength,
+ IN UINT32 StartLba,
+ IN UINT32 SectorSize
+ )
+/*++
+
+Routine Description:
+ Function to submit SCSI write 10 command.
+
+Arguments:
+ ScsiIo - A pointer to SCSI IO protocol.
+ Timeout - The length of timeout period.
+ SenseData - A pointer to output sense data.
+ SenseDataLength - The length of output sense data.
+ HostAdapterStatus - The status of Host Adapter.
+ TargetStatus - The status of the target.
+ DataBuffer - A pointer to a data buffer.
+ DataLength - The length of data buffer.
+ StartLba - The start address of LBA.
+ SectorSize - The sector size.
+
+Returns:
+
+ Returns:
+ EFI_SUCCESS - The status of the unit is tested successfully.
+ EFI_WARN_BUFFER_TOO_SMALL - The SCSI Request Packet was executed,
+ but the entire DataBuffer could not be transferred.
+ The actual number of bytes transferred is returned
+ in InTransferLength.
+ EFI_NOT_READY - The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
+ queued.
+ EFI_DEVICE_ERROR - A device error occurred while attempting to send
+ the SCSI Request Packet.
+ EFI_INVALID_PARAMETER - The contents of CommandPacket are invalid.
+ EFI_UNSUPPORTED - The command described by the SCSI Request Packet
+ is not supported by the SCSI initiator(i.e., SCSI
+ Host Controller).
+ EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
+ Request Packet to execute.
+
+--*/
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT64 Lun;
+ UINT8 *Target;
+ UINT8 TargetArray[EFI_SCSI_TARGET_MAX_BYTES];
+ EFI_STATUS Status;
+ UINT8 Cdb[10];
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, 10);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.OutDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.OutTransferLength= *DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Write (10) Command
+ //
+ Target = &TargetArray[0];
+ ScsiIo->GetDeviceLocation (ScsiIo, &Target, &Lun);
+
+ Cdb[0] = EFI_SCSI_OP_WRITE10;
+ Cdb[1] = (UINT8) (Lun & 0xe0);
+ Cdb[2] = (UINT8) (StartLba >> 24);
+ Cdb[3] = (UINT8) (StartLba >> 16);
+ Cdb[4] = (UINT8) (StartLba >> 8);
+ Cdb[5] = (UINT8) StartLba;
+ Cdb[7] = (UINT8) (SectorSize >> 8);
+ Cdb[8] = (UINT8) SectorSize;
+
+ CommandPacket.CdbLength = 10;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_OUT;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+ *DataLength = CommandPacket.InTransferLength;
+
+ return Status;
+}
diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.inf b/MdePkg/Library/UefiScsiLib/UefiScsiLib.inf new file mode 100644 index 0000000..2119b46 --- /dev/null +++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.inf @@ -0,0 +1,79 @@ +#/** @file
+# Component description file for Scsi Dxe Library.
+#
+# this Libarary implements Scsi command.
+# Copyright (c) 2006, Intel Corporation.
+#
+# All rights reserved. This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = UefiScsiLib
+ FILE_GUID = 280E42C3-826E-4573-9772-B74EF1086D95
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ScsiLib|DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER
+ EDK_RELEASE_VERSION = 0x00020000
+ EFI_SPECIFICATION_VERSION = 0x00020000
+
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+################################################################################
+#
+# Sources Section - list of files that are required for the build to succeed.
+#
+################################################################################
+
+[Sources.common]
+ UefiScsiLib.c
+
+################################################################################
+#
+# Includes Section - list of Include locations that are required for
+# this module.
+#
+################################################################################
+
+[Includes]
+ $(WORKSPACE)/MdePkg/Include/Library
+
+################################################################################
+#
+# Package Dependency Section - list of Package files that are required for
+# this module.
+#
+################################################################################
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+
+################################################################################
+#
+# Library Class Section - list of Library Classes that are required for
+# this module.
+#
+################################################################################
+
+[LibraryClasses]
+ BaseMemoryLib
+
+
diff --git a/MdePkg/MdePkg.dsc b/MdePkg/MdePkg.dsc index 5839888..24ffbc4 100644 --- a/MdePkg/MdePkg.dsc +++ b/MdePkg/MdePkg.dsc @@ -119,7 +119,7 @@ ${WORKSPACE}\MdePkg\Library/UefiLib/UefiLib.inf
${WORKSPACE}\MdePkg\Library/UefiRuntimeLib/UefiRuntimeLib.inf
${WORKSPACE}\MdePkg\Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
-
+ ${WORKSPACE}\MdePkg\Library/UefiScsiLib/UefiScsiLib.inf
[Components.IA32]
${WORKSPACE}\MdePkg\Library/BaseMemoryLibSse2/BaseMemoryLibSse2.inf
|