diff options
-rw-r--r-- | MdeModulePkg/Bus/Pci/UhciPei/DmaMem.c | 251 | ||||
-rw-r--r-- | MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c | 398 | ||||
-rw-r--r-- | MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h | 164 | ||||
-rw-r--r-- | MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf | 5 |
4 files changed, 719 insertions, 99 deletions
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/DmaMem.c b/MdeModulePkg/Bus/Pci/UhciPei/DmaMem.c new file mode 100644 index 0000000..c92bee4 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/UhciPei/DmaMem.c @@ -0,0 +1,251 @@ +/** @file
+The DMA memory help functions.
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UhcPeim.h"
+
+/**
+ Provides the controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+IoMmuMap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN EDKII_IOMMU_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Attribute;
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->Map (
+ IoMmu,
+ Operation,
+ HostAddress,
+ NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ switch (Operation) {
+ case EdkiiIoMmuOperationBusMasterRead:
+ case EdkiiIoMmuOperationBusMasterRead64:
+ Attribute = EDKII_IOMMU_ACCESS_READ;
+ break;
+ case EdkiiIoMmuOperationBusMasterWrite:
+ case EdkiiIoMmuOperationBusMasterWrite64:
+ Attribute = EDKII_IOMMU_ACCESS_WRITE;
+ break;
+ case EdkiiIoMmuOperationBusMasterCommonBuffer:
+ case EdkiiIoMmuOperationBusMasterCommonBuffer64:
+ Attribute = EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE;
+ break;
+ default:
+ ASSERT(FALSE);
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ Attribute
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->Unmap (IoMmu, Mapping);
+ *Mapping = NULL;
+ return Status;
+ }
+ } else {
+ *DeviceAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress;
+ *Mapping = NULL;
+ Status = EFI_SUCCESS;
+ }
+ return Status;
+}
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuUnmap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN VOID *Mapping
+ )
+{
+ if (IoMmu != NULL) {
+ IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ IoMmu->Unmap (IoMmu, Mapping);
+ }
+}
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ UINTN NumberOfBytes;
+ EFI_PHYSICAL_ADDRESS HostPhyAddress;
+
+ *HostAddress = NULL;
+ *DeviceAddress = 0;
+ *Mapping = NULL;
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->AllocateBuffer (
+ IoMmu,
+ EfiBootServicesData,
+ Pages,
+ HostAddress,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
+ Status = IoMmu->Map (
+ IoMmu,
+ EdkiiIoMmuOperationBusMasterCommonBuffer,
+ *HostAddress,
+ &NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *HostAddress = NULL;
+ return EFI_OUT_OF_RESOURCES;
+ }
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->Unmap (IoMmu, *Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *Mapping = NULL;
+ *HostAddress = NULL;
+ return Status;
+ }
+ } else {
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ Pages,
+ &HostPhyAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ *HostAddress = (VOID *) (UINTN) HostPhyAddress;
+ *DeviceAddress = HostPhyAddress;
+ *Mapping = NULL;
+ }
+ return Status;
+}
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ )
+{
+ if (IoMmu != NULL) {
+ IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ IoMmu->Unmap (IoMmu, Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
+ }
+}
+
+/**
+ Initialize IOMMU.
+
+ @param IoMmu Pointer to pointer to IOMMU PPI.
+
+**/
+VOID
+IoMmuInit (
+ OUT EDKII_IOMMU_PPI **IoMmu
+ )
+{
+ *IoMmu = NULL;
+ PeiServicesLocatePpi (
+ &gEdkiiIoMmuPpiGuid,
+ 0,
+ NULL,
+ (VOID **) IoMmu
+ );
+}
+
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c index 37b2124..b7d60db 100644 --- a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.c @@ -2,7 +2,7 @@ PEIM to produce gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved. <BR>
+Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved. <BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -18,6 +18,78 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "UhcPeim.h"
/**
+ Stop the host controller.
+
+ @param Uhc The UHCI device.
+ @param Timeout Max time allowed.
+
+ @retval EFI_SUCCESS The host controller is stopped.
+ @retval EFI_TIMEOUT Failed to stop the host controller.
+
+**/
+EFI_STATUS
+UhciStopHc (
+ IN USB_UHC_DEV *Uhc,
+ IN UINTN Timeout
+ )
+{
+ UINT16 CommandContent;
+ UINT16 UsbSts;
+ UINTN Index;
+
+ CommandContent = USBReadPortW (Uhc, Uhc->UsbHostControllerBaseAddress + USBCMD);
+ CommandContent &= USBCMD_RS;
+ USBWritePortW (Uhc, Uhc->UsbHostControllerBaseAddress + USBCMD, CommandContent);
+
+ //
+ // ensure the HC is in halt status after send the stop command
+ // Timeout is in us unit.
+ //
+ for (Index = 0; Index < (Timeout / 50) + 1; Index++) {
+ UsbSts = USBReadPortW (Uhc, Uhc->UsbHostControllerBaseAddress + USBSTS);
+
+ if ((UsbSts & USBSTS_HCH) == USBSTS_HCH) {
+ return EFI_SUCCESS;
+ }
+
+ MicroSecondDelay (50);
+ }
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ One notified function to stop the Host Controller at the end of PEI
+
+ @param[in] PeiServices Pointer to PEI Services Table.
+ @param[in] NotifyDescriptor Pointer to the descriptor for the Notification event that
+ caused this function to execute.
+ @param[in] Ppi Pointer to the PPI data associated with this function.
+
+ @retval EFI_SUCCESS The function completes successfully
+ @retval others
+**/
+EFI_STATUS
+EFIAPI
+UhcEndOfPei (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
+ IN VOID *Ppi
+ )
+{
+ USB_UHC_DEV *Uhc;
+
+ Uhc = PEI_RECOVERY_USB_UHC_DEV_FROM_THIS_NOTIFY (NotifyDescriptor);
+
+ //
+ // Stop the Host Controller
+ //
+ UhciStopHc (Uhc, 1000 * 1000);
+
+ return EFI_SUCCESS;
+}
+
+/**
Initializes Usb Host Controller.
@param FileHandle Handle of the file being invoked.
@@ -98,6 +170,7 @@ UhcPeimEntry ( UhcDev = (USB_UHC_DEV *) ((UINTN) TempPtr);
UhcDev->Signature = USB_UHC_DEV_SIGNATURE;
+ IoMmuInit (&UhcDev->IoMmu);
UhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
//
@@ -133,6 +206,12 @@ UhcPeimEntry ( continue;
}
+ UhcDev->EndOfPeiNotifyList.Flags = (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
+ UhcDev->EndOfPeiNotifyList.Guid = &gEfiEndOfPeiSignalPpiGuid;
+ UhcDev->EndOfPeiNotifyList.Notify = UhcEndOfPei;
+
+ PeiServicesNotifyPpi (&UhcDev->EndOfPeiNotifyList);
+
Index++;
}
@@ -190,9 +269,11 @@ UhcControlTransfer ( TD_STRUCT *PtrStatusTD;
EFI_STATUS Status;
UINT32 DataLen;
- UINT8 *PtrDataSource;
- UINT8 *Ptr;
UINT8 DataToggle;
+ UINT8 *RequestPhy;
+ VOID *RequestMap;
+ UINT8 *DataPhy;
+ VOID *DataMap;
UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
@@ -217,6 +298,24 @@ UhcControlTransfer ( ClearStatusReg (UhcDev, StatusReg);
//
+ // Map the Request and data for bus master access,
+ // then create a list of TD for this transfer
+ //
+ Status = UhciMapUserRequest (UhcDev, Request, &RequestPhy, &RequestMap);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = UhciMapUserData (UhcDev, TransferDirection, Data, DataLength, &PktID, &DataPhy, &DataMap);
+
+ if (EFI_ERROR (Status)) {
+ if (RequestMap != NULL) {
+ IoMmuUnmap (UhcDev->IoMmu, RequestMap);
+ }
+ return Status;
+ }
+
+ //
// generate Setup Stage TD
//
@@ -228,6 +327,7 @@ UhcControlTransfer ( 0,
DeviceSpeed,
(UINT8 *) Request,
+ RequestPhy,
(UINT8) sizeof (EFI_USB_DEVICE_REQUEST),
&PtrSetupTD
);
@@ -242,38 +342,11 @@ UhcControlTransfer ( //
// Data Stage of Control Transfer
//
- switch (TransferDirection) {
-
- case EfiUsbDataIn:
- PktID = INPUT_PACKET_ID;
- PtrDataSource = Data;
- DataLen = (UINT32) *DataLength;
- Ptr = PtrDataSource;
- break;
-
- case EfiUsbDataOut:
- PktID = OUTPUT_PACKET_ID;
- PtrDataSource = Data;
- DataLen = (UINT32) *DataLength;
- Ptr = PtrDataSource;
- break;
-
- //
- // no data stage
- //
- case EfiUsbNoData:
- if (*DataLength != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- PktID = OUTPUT_PACKET_ID;
- PtrDataSource = NULL;
- DataLen = 0;
- Ptr = NULL;
- break;
- default:
- return EFI_INVALID_PARAMETER;
+ if (TransferDirection == EfiUsbNoData) {
+ DataLen = 0;
+ } else {
+ DataLen = (UINT32) *DataLength;
}
DataToggle = 1;
@@ -297,7 +370,8 @@ UhcControlTransfer ( UhcDev,
DeviceAddress,
0,
- Ptr,
+ Data,
+ DataPhy,
PacketSize,
PktID,
DataToggle,
@@ -312,7 +386,8 @@ UhcControlTransfer ( PtrPreTD = PtrTD;
DataToggle ^= 1;
- Ptr += PacketSize;
+ Data = (VOID *) ((UINT8 *) Data + PacketSize);
+ DataPhy += PacketSize;
DataLen -= PacketSize;
}
@@ -365,14 +440,19 @@ UhcControlTransfer ( // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
//
if (!IsStatusOK (UhcDev, StatusReg)) {
-
- ClearStatusReg (UhcDev, StatusReg);
*TransferResult |= EFI_USB_ERR_SYSTEM;
- return EFI_DEVICE_ERROR;
+ Status = EFI_DEVICE_ERROR;
}
ClearStatusReg (UhcDev, StatusReg);
+ if (DataMap != NULL) {
+ IoMmuUnmap (UhcDev->IoMmu, DataMap);
+ }
+ if (RequestMap != NULL) {
+ IoMmuUnmap (UhcDev->IoMmu, RequestMap);
+ }
+
return Status;
}
@@ -431,8 +511,6 @@ UhcBulkTransfer ( TD_STRUCT *PtrPreTD;
UINT8 PktID;
- UINT8 *PtrDataSource;
- UINT8 *Ptr;
BOOLEAN IsFirstTD;
@@ -444,6 +522,9 @@ UhcBulkTransfer ( UINT16 CommandContent;
+ UINT8 *DataPhy;
+ VOID *DataMap;
+
UhcDev = PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS (This);
//
@@ -467,7 +548,6 @@ UhcBulkTransfer ( PtrFirstTD = NULL;
PtrPreTD = NULL;
DataLen = 0;
- Ptr = NULL;
ShortPacketEnable = FALSE;
@@ -495,33 +575,24 @@ UhcBulkTransfer ( ClearStatusReg (UhcDev, StatusReg);
+ //
+ // Map the source data buffer for bus master access,
+ // then create a list of TDs
+ //
if ((EndPointAddress & 0x80) != 0) {
TransferDirection = EfiUsbDataIn;
} else {
TransferDirection = EfiUsbDataOut;
}
- switch (TransferDirection) {
+ Status = UhciMapUserData (UhcDev, TransferDirection, Data, DataLength, &PktID, &DataPhy, &DataMap);
- case EfiUsbDataIn:
- ShortPacketEnable = TRUE;
- PktID = INPUT_PACKET_ID;
- PtrDataSource = Data;
- DataLen = (UINT32) *DataLength;
- Ptr = PtrDataSource;
- break;
-
- case EfiUsbDataOut:
- PktID = OUTPUT_PACKET_ID;
- PtrDataSource = Data;
- DataLen = (UINT32) *DataLength;
- Ptr = PtrDataSource;
- break;
-
- default:
- break;
+ if (EFI_ERROR (Status)) {
+ return Status;
}
+ DataLen = (UINT32) *DataLength;
+
PtrQH = UhcDev->BulkQH;
IsFirstTD = TRUE;
@@ -540,7 +611,8 @@ UhcBulkTransfer ( UhcDev,
DeviceAddress,
EndPointAddress,
- Ptr,
+ Data,
+ DataPhy,
PacketSize,
PktID,
*DataToggle,
@@ -570,7 +642,8 @@ UhcBulkTransfer ( PtrPreTD = PtrTD;
*DataToggle ^= 1;
- Ptr += PacketSize;
+ Data = (VOID *) ((UINT8 *) Data + PacketSize);
+ DataPhy += PacketSize;
DataLen -= PacketSize;
}
//
@@ -604,14 +677,16 @@ UhcBulkTransfer ( // if has errors that cause host controller halt, then return EFI_DEVICE_ERROR directly.
//
if (!IsStatusOK (UhcDev, StatusReg)) {
-
- ClearStatusReg (UhcDev, StatusReg);
*TransferResult |= EFI_USB_ERR_SYSTEM;
- return EFI_DEVICE_ERROR;
+ Status = EFI_DEVICE_ERROR;
}
ClearStatusReg (UhcDev, StatusReg);
+ if (DataMap != NULL) {
+ IoMmuUnmap (UhcDev->IoMmu, DataMap);
+ }
+
return Status;
}
@@ -1492,7 +1567,8 @@ CreateTD ( @param DevAddr Device address.
@param Endpoint Endpoint number.
@param DeviceSpeed Device Speed.
- @param DevRequest Device reuquest.
+ @param DevRequest CPU memory address of request structure buffer to transfer.
+ @param RequestPhy PCI memory address of request structure buffer to transfer.
@param RequestLen Request length.
@param PtrTD TD_STRUCT generated.
@@ -1507,6 +1583,7 @@ GenSetupStageTD ( IN UINT8 Endpoint,
IN UINT8 DeviceSpeed,
IN UINT8 *DevRequest,
+ IN UINT8 *RequestPhy,
IN UINT8 RequestLen,
OUT TD_STRUCT **PtrTD
)
@@ -1583,7 +1660,11 @@ GenSetupStageTD ( TdStruct->PtrTDBuffer = (UINT8 *) DevRequest;
TdStruct->TDBufferLength = RequestLen;
- SetTDDataBuffer (TdStruct);
+ //
+ // Set the beginning address of the buffer that will be used
+ // during the transaction.
+ //
+ TdStruct->TDData.TDBufferPtr = (UINT32) (UINTN) RequestPhy;
*PtrTD = TdStruct;
@@ -1596,7 +1677,8 @@ GenSetupStageTD ( @param UhcDev The UHCI device.
@param DevAddr Device address.
@param Endpoint Endpoint number.
- @param PtrData Data buffer.
+ @param PtrData CPU memory address of user data buffer to transfer.
+ @param DataPhy PCI memory address of user data buffer to transfer.
@param Len Data length.
@param PktID PacketID.
@param Toggle Data toggle value.
@@ -1613,6 +1695,7 @@ GenDataTD ( IN UINT8 DevAddr,
IN UINT8 Endpoint,
IN UINT8 *PtrData,
+ IN UINT8 *DataPhy,
IN UINT8 Len,
IN UINT8 PktID,
IN UINT8 Toggle,
@@ -1700,7 +1783,11 @@ GenDataTD ( TdStruct->PtrTDBuffer = (UINT8 *) PtrData;
TdStruct->TDBufferLength = Len;
- SetTDDataBuffer (TdStruct);
+ //
+ // Set the beginning address of the buffer that will be used
+ // during the transaction.
+ //
+ TdStruct->TDData.TDBufferPtr = (UINT32) (UINTN) DataPhy;
*PtrTD = TdStruct;
@@ -1803,7 +1890,11 @@ CreateStatusTD ( PtrTDStruct->PtrTDBuffer = NULL;
PtrTDStruct->TDBufferLength = 0;
- SetTDDataBuffer (PtrTDStruct);
+ //
+ // Set the beginning address of the buffer that will be used
+ // during the transaction.
+ //
+ PtrTDStruct->TDData.TDBufferPtr = 0;
*PtrTD = PtrTDStruct;
@@ -2174,25 +2265,6 @@ SetTDTokenPacketID ( }
/**
- Set the beginning address of the data buffer that will be used
- during the transaction.
-
- @param PtrTDStruct Place to store TD_STRUCT pointer.
-
-**/
-VOID
-SetTDDataBuffer (
- IN TD_STRUCT *PtrTDStruct
- )
-{
- //
- // Set the beginning address of the data buffer that will be used
- // during the transaction.
- //
- PtrTDStruct->TDData.TDBufferPtr = (UINT32) (UINTN) (PtrTDStruct->PtrTDBuffer);
-}
-
-/**
Detect whether the TD is active.
@param PtrTDStruct Place to store TD_STRUCT pointer.
@@ -2773,25 +2845,29 @@ CreateMemoryBlock ( )
{
EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS TempPtr;
+ UINT8 *TempPtr;
UINTN MemPages;
UINT8 *Ptr;
+ VOID *Mapping;
+ EFI_PHYSICAL_ADDRESS MappedAddr;
//
// Memory Block uses MemoryBlockSizeInPages pages,
// memory management header and bit array use 1 page
//
MemPages = MemoryBlockSizeInPages + 1;
- Status = PeiServicesAllocatePages (
- EfiBootServicesData,
+ Status = IoMmuAllocateBuffer (
+ UhcDev->IoMmu,
MemPages,
- &TempPtr
+ (VOID **) &TempPtr,
+ &MappedAddr,
+ &Mapping
);
if (EFI_ERROR (Status)) {
return Status;
}
- Ptr = (UINT8 *) ((UINTN) TempPtr);
+ Ptr = TempPtr;
ZeroMem (Ptr, MemPages * EFI_PAGE_SIZE);
@@ -2810,7 +2886,7 @@ CreateMemoryBlock ( //
// Memory block initial address
//
- Ptr = (UINT8 *) ((UINTN) TempPtr);
+ Ptr = TempPtr;
Ptr += EFI_PAGE_SIZE;
(*MemoryHeader)->MemoryBlockPtr = Ptr;
//
@@ -3217,3 +3293,135 @@ DelinkMemoryBlock ( }
}
}
+
+/**
+ Map address of request structure buffer.
+
+ @param Uhc The UHCI device.
+ @param Request The user request buffer.
+ @param MappedAddr Mapped address of request.
+ @param Map Identificaion of this mapping to return.
+
+ @return EFI_SUCCESS Success.
+ @return EFI_DEVICE_ERROR Fail to map the user request.
+
+**/
+EFI_STATUS
+UhciMapUserRequest (
+ IN USB_UHC_DEV *Uhc,
+ IN OUT VOID *Request,
+ OUT UINT8 **MappedAddr,
+ OUT VOID **Map
+ )
+{
+ EFI_STATUS Status;
+ UINTN Len;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+
+ Len = sizeof (EFI_USB_DEVICE_REQUEST);
+ Status = IoMmuMap (
+ Uhc->IoMmu,
+ EdkiiIoMmuOperationBusMasterRead,
+ Request,
+ &Len,
+ &PhyAddr,
+ Map
+ );
+
+ if (!EFI_ERROR (Status)) {
+ *MappedAddr = (UINT8 *) (UINTN) PhyAddr;
+ }
+
+ return Status;
+}
+
+/**
+ Map address of user data buffer.
+
+ @param Uhc The UHCI device.
+ @param Direction Direction of the data transfer.
+ @param Data The user data buffer.
+ @param Len Length of the user data.
+ @param PktId Packet identificaion.
+ @param MappedAddr Mapped address to return.
+ @param Map Identificaion of this mapping to return.
+
+ @return EFI_SUCCESS Success.
+ @return EFI_DEVICE_ERROR Fail to map the user data.
+
+**/
+EFI_STATUS
+UhciMapUserData (
+ IN USB_UHC_DEV *Uhc,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN VOID *Data,
+ IN OUT UINTN *Len,
+ OUT UINT8 *PktId,
+ OUT UINT8 **MappedAddr,
+ OUT VOID **Map
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+
+ Status = EFI_SUCCESS;
+
+ switch (Direction) {
+ case EfiUsbDataIn:
+ //
+ // BusMasterWrite means cpu read
+ //
+ *PktId = INPUT_PACKET_ID;
+ Status = IoMmuMap (
+ Uhc->IoMmu,
+ EdkiiIoMmuOperationBusMasterWrite,
+ Data,
+ Len,
+ &PhyAddr,
+ Map
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ *MappedAddr = (UINT8 *) (UINTN) PhyAddr;
+ break;
+
+ case EfiUsbDataOut:
+ *PktId = OUTPUT_PACKET_ID;
+ Status = IoMmuMap (
+ Uhc->IoMmu,
+ EdkiiIoMmuOperationBusMasterRead,
+ Data,
+ Len,
+ &PhyAddr,
+ Map
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ *MappedAddr = (UINT8 *) (UINTN) PhyAddr;
+ break;
+
+ case EfiUsbNoData:
+ if ((Len != NULL) && (*Len != 0)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto EXIT;
+ }
+
+ *PktId = OUTPUT_PACKET_ID;
+ *MappedAddr = NULL;
+ *Map = NULL;
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ }
+
+EXIT:
+ return Status;
+}
+
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h index 460db7e..9935f52 100644 --- a/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhcPeim.h @@ -1,7 +1,7 @@ /** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -22,6 +22,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include <Ppi/UsbController.h>
#include <Ppi/UsbHostController.h>
+#include <Ppi/IoMmu.h>
+#include <Ppi/EndOfPeiPhase.h>
#include <Library/DebugLib.h>
#include <Library/PeimEntryPoint.h>
@@ -177,7 +179,13 @@ struct _MEMORY_MANAGE_HEADER { typedef struct {
UINTN Signature;
PEI_USB_HOST_CONTROLLER_PPI UsbHostControllerPpi;
+ EDKII_IOMMU_PPI *IoMmu;
EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
+ //
+ // EndOfPei callback is used to stop the UHC DMA operation
+ // after exit PEI phase.
+ //
+ EFI_PEI_NOTIFY_DESCRIPTOR EndOfPeiNotifyList;
UINT32 UsbHostControllerBaseAddress;
FRAMELIST_ENTRY *FrameListEntry;
@@ -191,6 +199,7 @@ typedef struct { } USB_UHC_DEV;
#define PEI_RECOVERY_USB_UHC_DEV_FROM_UHCI_THIS(a) CR (a, USB_UHC_DEV, UsbHostControllerPpi, USB_UHC_DEV_SIGNATURE)
+#define PEI_RECOVERY_USB_UHC_DEV_FROM_THIS_NOTIFY(a) CR (a, USB_UHC_DEV, EndOfPeiNotifyList, USB_UHC_DEV_SIGNATURE)
/**
Submits control transfer to a target USB device.
@@ -654,7 +663,8 @@ CreateTD ( @param DevAddr Device address.
@param Endpoint Endpoint number.
@param DeviceSpeed Device Speed.
- @param DevRequest Device reuquest.
+ @param DevRequest CPU memory address of request structure buffer to transfer.
+ @param RequestPhy PCI memory address of request structure buffer to transfer.
@param RequestLen Request length.
@param PtrTD TD_STRUCT generated.
@@ -669,6 +679,7 @@ GenSetupStageTD ( IN UINT8 Endpoint,
IN UINT8 DeviceSpeed,
IN UINT8 *DevRequest,
+ IN UINT8 *RequestPhy,
IN UINT8 RequestLen,
OUT TD_STRUCT **PtrTD
);
@@ -679,7 +690,8 @@ GenSetupStageTD ( @param UhcDev The UHCI device.
@param DevAddr Device address.
@param Endpoint Endpoint number.
- @param PtrData Data buffer.
+ @param PtrData CPU memory address of user data buffer to transfer.
+ @param DataPhy PCI memory address of user data buffer to transfer.
@param Len Data length.
@param PktID PacketID.
@param Toggle Data toggle value.
@@ -696,6 +708,7 @@ GenDataTD ( IN UINT8 DevAddr,
IN UINT8 Endpoint,
IN UINT8 *PtrData,
+ IN UINT8 *DataPhy,
IN UINT8 Len,
IN UINT8 PktID,
IN UINT8 Toggle,
@@ -1330,4 +1343,149 @@ DelinkMemoryBlock ( IN MEMORY_MANAGE_HEADER *FreeMemoryHeader
);
+/**
+ Map address of request structure buffer.
+
+ @param Uhc The UHCI device.
+ @param Request The user request buffer.
+ @param MappedAddr Mapped address of request.
+ @param Map Identificaion of this mapping to return.
+
+ @return EFI_SUCCESS Success.
+ @return EFI_DEVICE_ERROR Fail to map the user request.
+
+**/
+EFI_STATUS
+UhciMapUserRequest (
+ IN USB_UHC_DEV *Uhc,
+ IN OUT VOID *Request,
+ OUT UINT8 **MappedAddr,
+ OUT VOID **Map
+ );
+
+/**
+ Map address of user data buffer.
+
+ @param Uhc The UHCI device.
+ @param Direction Direction of the data transfer.
+ @param Data The user data buffer.
+ @param Len Length of the user data.
+ @param PktId Packet identificaion.
+ @param MappedAddr Mapped address to return.
+ @param Map Identificaion of this mapping to return.
+
+ @return EFI_SUCCESS Success.
+ @return EFI_DEVICE_ERROR Fail to map the user data.
+
+**/
+EFI_STATUS
+UhciMapUserData (
+ IN USB_UHC_DEV *Uhc,
+ IN EFI_USB_DATA_DIRECTION Direction,
+ IN VOID *Data,
+ IN OUT UINTN *Len,
+ OUT UINT8 *PktId,
+ OUT UINT8 **MappedAddr,
+ OUT VOID **Map
+ );
+
+/**
+ Provides the controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+IoMmuMap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN EDKII_IOMMU_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuUnmap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN VOID *Mapping
+ );
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ );
+
+/**
+ Initialize IOMMU.
+
+ @param IoMmu Pointer to pointer to IOMMU PPI.
+
+**/
+VOID
+IoMmuInit (
+ OUT EDKII_IOMMU_PPI **IoMmu
+ );
+
#endif
diff --git a/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf b/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf index 7baa076..95ddea2 100644 --- a/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf +++ b/MdeModulePkg/Bus/Pci/UhciPei/UhciPei.inf @@ -4,7 +4,7 @@ # It produces gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid which is used
# to enable recovery function from USB Drivers.
#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions
@@ -36,6 +36,7 @@ [Sources]
UhcPeim.c
UhcPeim.h
+ DmaMem.c
[Packages]
@@ -55,6 +56,8 @@ [Ppis]
gPeiUsbHostControllerPpiGuid ## PRODUCES
gPeiUsbControllerPpiGuid ## CONSUMES
+ gEdkiiIoMmuPpiGuid ## CONSUMES
+ gEfiEndOfPeiSignalPpiGuid ## CONSUMES
[Depex]
|