diff options
-rwxr-xr-x | BaseTools/toolsetup.bat | 377 | ||||
-rw-r--r-- | BuildNotes2.txt | 12 | ||||
-rw-r--r-- | edksetup.bat | 372 |
3 files changed, 525 insertions, 236 deletions
diff --git a/BaseTools/toolsetup.bat b/BaseTools/toolsetup.bat index f2a3558..2f657ba 100755 --- a/BaseTools/toolsetup.bat +++ b/BaseTools/toolsetup.bat @@ -1,132 +1,361 @@ +@REM @file
+@REM This stand-alone program is typically called by the edksetup.bat file,
+@REM however it may be executed directly from the BaseTools project folder
+@REM if the file is not executed within a WORKSPACE\BaseTools folder.
@REM
-@REM Copyright (c) 2006, Intel Corporation
-@REM All rights reserved. This program and the accompanying materials
-@REM are licensed and made available under the terms and conditions of the BSD License
-@REM which accompanies this distribution. The full text of the license may be found at
-@REM http://opensource.org/licenses/bsd-license.php
+@REM Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.
+@REM
+@REM This program and the accompanying materials are licensed and made available
+@REM under the terms and conditions of the BSD Licensewhich accompanies this
+@REM distribution. The full text of the license may be found at:
+@REM http://opensource.org/licenses/bsd-license.php
@REM
@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+@REM IMPLIED.
@REM
@echo off
+pushd .
-REM ##############################################################
-REM # You should not have to modify anything below this line
-REM #
+@REM ##############################################################
+@REM # You should not have to modify anything below this line
+@REM #
-if /I "%1"=="-h" goto usage
-if /I "%1"=="-help" goto usage
-if /I "%1"=="--help" goto usage
-if /I "%1"=="/h" goto usage
-if /I "%1"=="/?" goto usage
-if /I "%1"=="/help" goto usage
+@if /I "%1"=="-h" goto Usage
+@if /I "%1"=="-help" goto Usage
+@if /I "%1"=="--help" goto Usage
+@if /I "%1"=="/h" goto Usage
+@if /I "%1"=="/help" goto Usage
+@if /I "%1"=="/?" goto Usage
-if /I "%1"=="Reconfig" (
- if NOT "%2"=="" set EDK_TOOLS_PATH=%2
-) else (
- if NOT "%1"=="" set EDK_TOOLS_PATH=%1
-)
-REM
-REM Check the required system environment variables
-REM
+:loop
+ @if "%1"=="" goto setup_workspace
+ @if /I "%1"=="--nt32" (
+ @REM Ignore --nt32 flag
+ shift
+ goto loop
+ )
+ @if /I "%1"=="Reconfig" (
+ shift
+ set RECONFIG=TRUE
+ goto loop
+ )
+ @if /I "%1"=="Rebuild" (
+ shift
+ set REBUILD=TRUE
+ goto loop
+ )
+ @if /I "%1"=="ForceRebuild" (
+ shift
+ set FORCE_REBUILD=TRUE
+ goto loop
+ )
+ if "%1"=="" goto setup_workspace
+ if exist %1 (
+ if not defined BASE_TOOLS_PATH (
+ if exist %1\Source set BASE_TOOLS_PATH=%1
+ shift
+ goto loop
+ )
+ if not defined EDK_TOOLS_PATH (
+ if exist %1\Bin\Win32 set EDK_TOOLS_PATH=%1
+ shift
+ goto loop
+ )
+ echo.
+ echo !!! ERROR !!! Unknown argument, %1 !!!
+ echo.
+ goto end
+ ) else (
+ echo.
+ echo !!! ERROR !!! Unknown argument, %1 !!!
+ echo.
+ goto end
+ )
+ goto loop
+
+
+@REM
+@REM Check the required system environment variables
+@REM
:setup_workspace
-REM
-REM check the EDK_TOOLS_PATH
-REM
-if not defined EDK_TOOLS_PATH goto no_tools_path
-if exist %EDK_TOOLS_PATH% goto set_path
-echo.
-echo !!!WARNING!!! %EDK_TOOLS_PATH% doesn't exist. %WORKSPACE%\BaseTools will be used !!!
-echo.
+ REM
+ REM check the EDK_TOOLS_PATH
+ REM
+ if not defined EDK_TOOLS_PATH goto no_EDK_TOOLS_PATH
+ if exist %EDK_TOOLS_PATH% goto set_PATH
-:no_tools_path
-if exist %WORKSPACE%\BaseTools (
- set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools
-) else (
- echo.
- echo !!!WARNING!!! No tools path found. Please set EDK_TOOLS_PATH !!!
- echo.
- goto end
-)
+:no_EDK_TOOLS_PATH
+ if not defined WORKSPACE (
+ if defined BASE_TOOLS_PATH (
+ set EDK_TOOLS_PATH=%BASE_TOOLS_PATH%
+ goto set_PATH
+ ) else (
+ echo.
+ echo !!! ERROR !!! Neither BASE_TOOLS_PATH nor EDK_TOOLS_PATH are set. !!!
+ echo.
+ goto end
+ )
+ ) else (
+ if exist %WORKSPACE%\BaseTools\Bin (
+ set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools
+ goto set_PATH
+ ) else (
+ echo.
+ echo !!! ERROR !!! No tools path available. Please set EDK_TOOLS_PATH !!!
+ echo.
+ goto end
+ )
+ )
-:set_path
-if defined WORKSPACE_TOOLS_PATH goto check_path
-set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%
-set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
-goto path_ok
+:set_PATH
+ if defined WORKSPACE_TOOLS_PATH goto check_PATH
+ set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%
+ set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
+ goto PATH_ok
-:check_path
-if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto path_ok
-set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%
-set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
-echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this WORKSPACE
+:check_PATH
+ if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto PATH_ok
+ set PATH=%EDK_TOOLS_PATH%\Bin;%EDK_TOOLS_PATH%\Bin\Win32;%PATH%
+ set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
+ echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this session.
-:path_ok
-echo PATH = %PATH%
-echo.
-echo WORKSPACE = %WORKSPACE%
-echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH%
-echo.
+:PATH_ok
+ echo PATH = %PATH%
+ echo.
+ if defined WORKSPACE (
+ echo WORKSPACE = %WORKSPACE%
+ )
+ echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH%
+ if defined BASE_TOOLS_PATH (
+ echo BASE_TOOLS_PATH = %EDK_TOOLS_PATH%
+ )
+ echo.
REM
REM copy *.template to %WORKSPACE%\Conf
REM
+if not defined WORKSPACE (
+ if defined RECONFIG (
+ echo.
+ echo !!! WARNING !!! WORKSPACE environment variable was not set, cannot Reconfig !!!
+ echo.
+ )
+ goto skip_reconfig
+)
+
if NOT exist %WORKSPACE%\Conf (
mkdir %WORKSPACE%\Conf
) else (
- if /I "%1"=="Reconfig" (
+ if defined RECONFIG (
echo.
echo Over-writing the files in the WORKSPACE\Conf directory
echo using the default template files
echo.
)
)
+
if NOT exist %WORKSPACE%\Conf\FrameworkDatabase.db (
echo copying ... FrameworkDatabase.template to %WORKSPACE%\Conf\FrameworkDatabase.db
copy %EDK_TOOLS_PATH%\Conf\FrameworkDatabase.template %WORKSPACE%\Conf\FrameworkDatabase.db > nul
) else (
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\FrameworkDatabase.template %WORKSPACE%\Conf\FrameworkDatabase.db > nul
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\FrameworkDatabase.template %WORKSPACE%\Conf\FrameworkDatabase.db > nul
)
+
if NOT exist %WORKSPACE%\Conf\target.txt (
echo copying ... target.template to %WORKSPACE%\Conf\target.txt
copy %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul
) else (
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\target.template %WORKSPACE%\Conf\target.txt > nul
)
+
if NOT exist %WORKSPACE%\Conf\tools_def.txt (
echo copying ... tools_def.template to %WORKSPACE%\Conf\tools_def.txt
copy %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul
) else (
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\tools_def.template %WORKSPACE%\Conf\tools_def.txt > nul
)
+
if NOT exist %WORKSPACE%\Conf\build_rule.txt (
echo copying ... build_rule.template to %WORKSPACE%\Conf\build_rule.txt
copy %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul
) else (
- if /I "%1"=="Reconfig" copy /Y %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul
+ if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\build_rule.template %WORKSPACE%\Conf\build_rule.txt > nul
)
-REM
-REM copy XMLSchema to %EDK_TOOLS_PATH%\Conf\XMLSchema
-REM
-REM echo copying ... XMLSchema to %EDK_TOOLS_PATH%\Conf\XMLSchema
-REM xcopy %WORKSPACE%\Conf\XMLSchema %EDK_TOOLS_PATH%\Conf\XMLSchema /S /I /D /F /Q > nul
+:skip_reconfig
+
+@REM
+@REM Test if we are going to have to do a build
+@REM
+if defined FORCE_REBUILD goto check_build_environment
+if defined REBUILD goto check_build_environment
+if not exist "%EDK_TOOLS_PATH%\Bin" goto check_build_environment
+
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\BootSectImage.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\build.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\EfiLdrImage.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\EfiRom.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenBootSector.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFds.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFfs.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFv.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenFw.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenPage.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenSec.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\GenVtf.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\MigrationMsa2Inf.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\Split.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\TargetTool.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\TianoCompress.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\Trim.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\VfrCompile.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\Fpd2Dsc.exe" goto check_build_environment
+IF NOT EXIST "%EDK_TOOLS_PATH%\Bin\Win32\VolInfo.exe" goto check_build_environment
-REM
-REM Done!!!
-REM
goto end
-:usage
-echo.
-echo "Usage: %0 [/? | /h | /help | -h | -help | --help] [Reconfig] [tools_path]"
-echo.
-echo tools_path Tools' path. EDK_TOOLS_PATH will be set to this path.
+:check_build_environment
+
+ if not defined FORCE_REBUILD (
+ echo.
+ echo Rebuilding of tools is not required. Binaries of the latest,
+ echo tested versions of the tools have been tested and included in the
+ echo EDK II repository.
+ echo.
+ echo If you really want to build the tools, use the FORCE_REBUILD option.
+ echo.
+ goto end
+ )
+
+ if not defined BASE_TOOLS_PATH (
+ if not exist "Source\C\Makefile" (
+ if not exist "%EDK_TOOLS_PATH%\Source\C\Makefile" goto no_source_files
+ set BASE_TOOLS_PATH=%EDK_TOOLS_PATH%
+ ) else (
+ set BASE_TOOLS_PATH=%CD%
+ )
+ )
+ set PATH=%BASE_TOOLS_PATH%\Bin\Win32;%PATH%
+
+ set PYTHONPATH=%BASE_TOOLS_PATH%\Source\Python
+
+ if not defined PYTHON_HOME (
+ if defined PYTHONHOME (
+ set PYTHON_HOME=%PYTHONHOME%
+ ) else (
+ echo.
+ echo !!! ERROR !!! PYTHON is required to build or execute the tools !!!
+ echo.
+ goto end
+ )
+ )
+
+ @REM We have Python, now test for FreezePython application
+ if not defined PYTHON_FREEZER_PATH (
+ @REM see if we can find FreezePython.ex
+ if exist "%PYTHON_HOME%\Tools\cx_Freeze-3.0.3\FreezePython.exe" (
+ set PYTHON_FREEZER_PATH=%PYTHON_HOME%\Tools\cx_Freeze-3.0.3
+ )
+ if exist "%PYTHON_HOME%\Tools\cx_Freeze\FreezePython.exe" (
+ set PYTHON_FREEZER_PATH=%PYTHON_HOME%\Tools\cx_Freeze
+ )
+ if exist "C:\cx_Freeze\FreezePython.exe" (
+ set PYTHON_FREEZER_PATH=C:\cx_Freeze
+ )
+ if exist "C:\cx_Freeze-3.0.3" (
+ set PYTHON_FREEZER_PATH=C:\cx_Freeze-3.0.3
+ )
+ if not defined PYTHON_FREEZER_PATH (
+ echo.
+ echo !!! WARNING !!! Will not be able to compile Python programs to .exe
+ echo Will setup environment to run Python scripts directly.
+ echo.
+ set PYTHONPATH=%BASE_TOOLS_PATH%\Source\Python
+ set PATH=%PYTHONPATH%\build;%PYTHONPATH%\GenFds;%PYTHONPATH%\Trim;%PATH%
+ set PATHEXT=%PATHEXT%;.py
+ )
+ )
+
+ echo BASE_TOOLS_PATH = %BASE_TOOLS_PATH%
+ echo PYTHON_PATH = %PYTHON_PATH%
+ echo PYTHON_FREEZER_PATH = %PYTHON_FREEZER_PATH%
+ echo.
+
+ if defined VCINSTALLDIR goto VisualStudioAvailable
+ if defined VS71COMNTOOLS (
+ call "%VS71COMNTOOLS%\vsvars32.bat"
+ ) else (
+ if defined VS80COMNTOOLS (
+ call "%VS80COMNTOOLS%\vsvars32.bat"
+ ) else (
+ echo.
+ echo !!! ERROR !!!! Cannot find Visual Studio, required to build C tools !!!
+ echo.
+ goto end
+ )
+ )
+
+:VisualStudioAvailable
+ if defined FORCE_REBUILD goto CleanAndBuild
+ goto IncrementalBuild
+
+:CleanAndBuild
+ pushd .
+ cd %BASE_TOOLS_PATH%
+ call nmake cleanall
+ del /f /q %BASE_TOOLS_PATH%\Bin\Win32\*.*
+ popd
+ @REM Let CleanAndBuild fall through to IncrementalBuild
+
+
+:IncrementalBuild
+ pushd .
+ cd %BASE_TOOLS_PATH%
+ call nmake c
+ popd
+
+ if defined PYTHON_FREEZER_PATH (
+ echo BUILDING PYTHON TOOLS
+ pushd .
+ cd %BASE_TOOLS_PATH%
+ call nmake python
+ popd
+ ) else (
+ echo.
+ echo !!! WARNING !!! Cannot make executable from Python code, executing python scripts instead !!!
+ echo.
+ )
+ goto end
+
+
+:no_source_files
+ echo.
+ echo !!! ERROR !!! Cannot build BaseTools applications - no source directory located !!!
+ echo.
+ goto end
+
+:Usage
+ echo.
+ echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild | ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]]"
+ echo.
+ echo base_tools_path BaseTools project path, BASE_TOOLS_PATH will be set to this path.
+ echo edk_tools_path EDK_TOOLS_PATH will be set to this path.
+ echo Rebuild If sources are available perform an Incremental build, only
+ echo build those updated tools.
+ echo ForceRebuild If sources are available, rebuild all tools regardless of
+ echo whether they have been updated or not.
+ echo Reconfig Reinstall target.txt, tools_def.txt and build_rule.txt.
echo.
:end
+set REBUILD=
+set FORCE_REBUILD=
+set RECONFIG=
+popd
+
@echo on
diff --git a/BuildNotes2.txt b/BuildNotes2.txt index ffec644..fe02cdc 100644 --- a/BuildNotes2.txt +++ b/BuildNotes2.txt @@ -32,8 +32,12 @@ In a command window, change to the top-level directory of the EDK II source. First, set up your workspace. If you have had a setup, please make sure that
you don't have newer *.template in WORKSPACE\BaseTools\Conf. Otherwise remove
-*.txt files in WORKSPACE\Conf in advance.
- c:\MyWork\edk2\> edksetup newbuild
+*.txt files in WORKSPACE\Conf in advance. For the reference build of the Nt32
+Platform emulation environment, use the --nt32 option for edksetup. Building
+other platforms or modules do not require this option, as Visual Studio standard
+includes, libraries and/or dlls are not required for normal development.
+
+ c:\MyWork\edk2\> edksetup --nt32
Second, go to the module directory (For example, MdeModulePkg\Application\HelloWorld),
and then begin to build
@@ -99,7 +103,7 @@ have the Python interpreter (version 2.5) installed. The source of Python code i AutoGen/AutoGen.py - Generate AutoGen.c/.h and makefile only
"build.py" steps:
- 1. Run "edksetup.bat newbuild"
+ 1. Run "edksetup.bat"
2. set PYTHONPATH to the local directory of above source (BaseTools/Source/Python)
3. Set ACTIVE_PLATFORM in WORKSPACE\Conf
4. Go to platform or module directory
@@ -107,7 +111,7 @@ have the Python interpreter (version 2.5) installed. The source of Python code i directly.
"AutoGen.py" steps:
- 1. Run "edksetup.bat newbuild"
+ 1. Run "edksetup.bat"
2. set PYTHONPATH to the local directory of above source (BaseTools/Source/Python)
3. Set ACTIVE_PLATFORM in WORKSPACE\Conf
4. Run "<python_interpreter.exe> <python_source_dir>/AutoGen/AutoGen.py" or "<python_source_dir>/AutoGen/AutoGen.py"
diff --git a/edksetup.bat b/edksetup.bat index 91b83c6..30c8da1 100644 --- a/edksetup.bat +++ b/edksetup.bat @@ -1,5 +1,7 @@ +@REM @file
+@REM Windows batch file to setup a WORKSPACE environment
@REM
-@REM Copyright (c) 2006, Intel Corporation
+@REM Copyright (c) 2006 - 2008, Intel Corporation
@REM All rights reserved. This program and the accompanying materials
@REM are licensed and made available under the terms and conditions of the BSD License
@REM which accompanies this distribution. The full text of the license may be found at
@@ -9,13 +11,15 @@ @REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@REM
-@REM set following environment in this file or in command shell
+@REM set following environment in this file or in command shell for the older,
+@REM JAVA/Ant build
@REM set JAVA_HOME=C:\Java\jdk1.5.0_06
@REM set ANT_HOME=C:\ANT
@REM set XMLBEANS_HOME=C:\xmlbeans
@REM set CYGWIN_HOME=C:\cygwin
-@REM usage: edksetup.bat [Rebuild] [ForceRebuild] [Reconfig]
+@REM usage:
+@REM edksetup.bat [--nt32] [AntBuild] [Rebuild] [ForceRebuild] [Reconfig]
@REM if the argument, skip is present, only the paths and the
@REM test and set of environment settings are performed.
@@ -38,7 +42,13 @@ set WORKSPACE=%CD% @if /I "%1"=="/h" goto Usage
@if /I "%1"=="/?" goto Usage
@if /I "%1"=="/help" goto Usage
-@if /I not "%1"=="--nt32" goto check_new_build
+
+@if /I not "%1"=="--nt32" goto check_Ant_build
+
+@REM Flag, --nt32 is set
+@REM The Nt32 Emluation Platform requires Microsoft Libraries
+@REM and headers to interface with Windows.
+
if not defined VCINSTALLDIR (
if defined VS71COMNTOOLS (
call "%VS71COMNTOOLS%\vsvars32.bat"
@@ -54,44 +64,88 @@ if not defined VCINSTALLDIR ( )
shift
-:check_new_build
-@if /I "%1"=="NewBuild" goto NewBuild
+:check_Ant_build
+ @if /I "%1"=="AntBuild" goto AntBuild
-:AntBuild
@REM
-@REM Check the required system environment variables
+@REM Default is new, Makefile Base Build
@REM
-:check_vc
-if defined VCINSTALLDIR goto check_cygwin
-if defined VS71COMNTOOLS (
- call "%VS71COMNTOOLS%\vsvars32.bat"
-) else (
+@if /I "%1"=="NewBuild" shift
+@if not defined EDK_TOOLS_PATH set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools
+@IF NOT EXIST "%EDK_TOOLS_PATH%\toolsetup.bat" goto BadBaseTools
+@call %EDK_TOOLS_PATH%\toolsetup.bat %*
+@goto end
+
+:BadBaseTools
+ @REM
+ @REM Need the BaseTools Package in order to build
+ @REM
echo.
- echo !!! WARNING !!! Cannot find Visual Studio !!!
+ echo !!! ERROR !!! The BaseTools Package was not found !!!
echo.
-)
+ echo Set the system environment variable, EDK_TOOLS_PATH to the BaseTools,
+ echo For example,
+ echo set EDK_TOOLS_PATH=C:\MyTools\BaseTools
+ echo The setup script, toolsetup.bat must reside in this folder.
+ echo.
+ @goto end
+
+@REM With the exception of the :end and :Usage tags, all information below
+@REM these lines is for the JAVA/Ant Build!
+
+:AntBuild
+ @REM
+ @REM Check the required system environment variables
+ @REM
+ @if /I "%1"=="AntBuild" shift
+
+ set FOUND="FALSE"
+ if exist "Tools\Jars" set FOUND="TRUE"
+ if exist "%EDK_TOOLS_PATH%\Tools\Jars" set FOUND="TRUE"
+ if %FOUND%=="FALSE" (
+ echo.
+ echo !!! ERROR !!! You have selected the Java/Ant build, however those tools
+ echo cannot be found in this WORKSPACE.
+ echo.
+ echo Please double check that the AntTools project is installed
+ echo in this WORKSPACE.
+ echo.
+ set FOUND=""
+ goto end
+ )
+ set FOUND=""
+
+:check_vc
+ if defined VCINSTALLDIR goto check_cygwin
+ if defined VS71COMNTOOLS (
+ call "%VS71COMNTOOLS%\vsvars32.bat"
+ ) else (
+ echo.
+ echo !!! WARNING !!! Cannot find Visual Studio !!!
+ echo.
+ )
:check_cygwin
-if defined CYGWIN_HOME goto check_java
-if exist c:\cygwin (
- set CYGWIN_HOME=c:\cygwin
-) else (
- echo.
- echo !!! WARNING !!! No CYGWIN_HOME set, gcc build may not be used !!!
- echo.
-)
+ if defined CYGWIN_HOME goto check_java
+ if exist c:\cygwin (
+ set CYGWIN_HOME=c:\cygwin
+ ) else (
+ echo.
+ echo !!! WARNING !!! No CYGWIN_HOME set, gcc build may not be used !!!
+ echo.
+ )
:check_java
-if "%JAVA_HOME%"=="" goto no_jdk
+ if "%JAVA_HOME%"=="" goto no_jdk
:check_ant
-if "%ANT_HOME%"=="" goto no_ant
-if not exist %ANT_HOME%\lib\ant-contrib.jar goto no_antcontrib
+ if "%ANT_HOME%"=="" goto no_ant
+ if not exist %ANT_HOME%\lib\ant-contrib.jar goto no_antcontrib
:check_xmlbeans
-if "%XMLBEANS_HOME%"=="" goto no_xmlbeans
-if not exist %XMLBEANS_HOME%\lib\saxon8.jar goto no_saxon8
+ if "%XMLBEANS_HOME%"=="" goto no_xmlbeans
+ if not exist %XMLBEANS_HOME%\lib\saxon8.jar goto no_saxon8
set FRAMEWORK_TOOLS_PATH=%WORKSPACE%\Tools\bin
@@ -105,15 +159,15 @@ echo Setting the PATH variable to include the FRAMEWORK_TOOLS_PATH for this WORK goto path_ok
:check_path
-if "%FRAMEWORK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto path_ok
-set PATH=%FRAMEWORK_TOOLS_PATH%;%PATH%
-set WORKSPACE_TOOLS_PATH=%WORKSPACE%\Tools\bin
-echo Resetting the PATH variable to include the FRAMEWORK_TOOLS_PATH for this WORKSPACE
+ if "%FRAMEWORK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto path_ok
+ set PATH=%FRAMEWORK_TOOLS_PATH%;%PATH%
+ set WORKSPACE_TOOLS_PATH=%WORKSPACE%\Tools\bin
+ echo Resetting the PATH variable to include the FRAMEWORK_TOOLS_PATH for this WORKSPACE
:path_ok
-@if /I "%1"=="ForceRebuild" goto ForceBuild
-@if /I "%1"=="Reconfig" goto Reconfig
+ @if /I "%1"=="ForceRebuild" goto ForceBuild
+ @if /I "%1"=="Reconfig" goto Reconfig
@IF NOT EXIST "Tools\Jars\Common.jar" goto NormalBuild
@IF NOT EXIST "Tools\Jars\PcdTools.jar" goto NormalBuild
@@ -160,150 +214,152 @@ echo Resetting the PATH variable to include the FRAMEWORK_TOOLS_PATH for this WO goto skipbuild
:ForceBuild
-call ant -f %WORKSPACE%\Tools\build.xml -noclasspath cleanall
+ call ant -f %WORKSPACE%\Tools\build.xml -noclasspath cleanall
:NormalBuild
-@REM
-@REM Start to build the Framework Tools
-@REM
-
-echo.
-echo Building the Framework Tools
-echo.
-
-@REM
-@REM We are going to create the SurfaceArea.jar file first so that the other
-@REM Java Programs can use it.
-@REM It needs the XMLBEANS libraries in order to compile.
-@REM
-set CLASSPATH=%XMLBEANS_HOME%\lib;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\jsr173_1.0_api.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\xbean.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\xbean_xpath.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\xmlpublic.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\resolver.jar;%CLASSPATH%
-
-call ant -f %WORKSPACE%\Tools\build.xml SurfaceArea
-
-@REM
-@REM Now we can make the other Java Programs
-@REM All of the remaining Java Programs require the SurfaceArea library to compile
-@REM
-set CLASSPATH=%WORKSPACE%\Tools\Jars\SurfaceArea.jar;%CLASSPATH%
+ @REM
+ @REM Start to build the Framework Tools
+ @REM
-call ant -f %WORKSPACE%\Tools\build.xml JavaCode
-
-@REM
-@REM We have all of the Java Programs and add-in classes created, so we can start
-@REM using the cpp-tasks to create our tools
-@REM
-set CLASSPATH=%WORKSPACE%\Tools\Jars\Common.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\PcdTools.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\GenBuild.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\cpptasks.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\frameworktasks.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Bin\FrameworkWizard.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Bin\MigrationTools.jar;%CLASSPATH%
-
-call ant -f %WORKSPACE%\Tools\build.xml C_Code
+ echo.
+ echo Building the Framework Tools
+ echo.
-@REM
-@REM Done!!!
-@REM
-goto end
+ @REM
+ @REM We are going to create the SurfaceArea.jar file first so that the other
+ @REM Java Programs can use it.
+ @REM It needs the XMLBEANS libraries in order to compile.
+ @REM
+ set CLASSPATH=%XMLBEANS_HOME%\lib;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\jsr173_1.0_api.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\xbean.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\xbean_xpath.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\xmlpublic.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\resolver.jar;%CLASSPATH%
+
+ call ant -f %WORKSPACE%\Tools\build.xml SurfaceArea
+
+ @REM
+ @REM Now we can make the other Java Programs
+ @REM All of the remaining Java Programs require the SurfaceArea library to compile
+ @REM
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\SurfaceArea.jar;%CLASSPATH%
+
+ call ant -f %WORKSPACE%\Tools\build.xml JavaCode
+
+ @REM
+ @REM We have all of the Java Programs and add-in classes created, so we can start
+ @REM using the cpp-tasks to create our tools
+ @REM
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\Common.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\PcdTools.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\GenBuild.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\cpptasks.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\frameworktasks.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Bin\FrameworkWizard.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Bin\MigrationTools.jar;%CLASSPATH%
+
+ call ant -f %WORKSPACE%\Tools\build.xml C_Code
+
+ @REM
+ @REM Done!!!
+ @REM
+ goto end
:no_jdk
-echo.
-echo !!! Please install Java, and set JAVA_HOME !!!
-echo.
-goto end
+ echo.
+ echo !!! Please install Java, and set JAVA_HOME !!!
+ echo.
+ goto end
:no_ant
-echo.
-echo !!! Please install Apache Ant, and set ANT_HOME !!!
-echo.
-goto end
+ echo.
+ echo !!! Please install Apache Ant, and set ANT_HOME !!!
+ echo.
+ goto end
:no_antcontrib
-echo.
-echo !!! Please install Ant-contrib to ANT_HOME !!!
-echo.
-goto end
+ echo.
+ echo !!! Please install Ant-contrib to ANT_HOME !!!
+ echo.
+ goto end
:no_xmlbeans
-echo.
-echo !!! Please install XML Beans, and set XMLBEANS_HOME !!!
-echo.
-goto end
+ echo.
+ echo !!! Please install XML Beans, and set XMLBEANS_HOME !!!
+ echo.
+ goto end
:no_saxon8
-echo.
-echo !!! Please copy saxon8.jar file to XMLBEANS_HOME\lib !!!
-echo.
-goto end
+ echo.
+ echo !!! Please copy saxon8.jar file to XMLBEANS_HOME\lib !!!
+ echo.
+ goto end
:skipbuild
-@REM
-@REM This just sets up the CLASSPATH, the rest of the environment should have been set already.
-@REM
-echo.
-echo WORKSPACE: %WORKSPACE%
-echo JAVA_HOME: %JAVA_HOME%
-echo ANT_HOME: %ANT_HOME%
-echo XMLBEANS_HOME: %XMLBEANS_HOME%
-echo CYGWIN_HOME: %CYGWIN_HOME%
-echo PATH: %PATH%
-echo.
-set CLASSPATH=%XMLBEANS_HOME%\lib;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\jsr173_1.0_api.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\xbean.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\xbean_xpath.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\xmlpublic.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8-dom.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8-xpath.jar;%CLASSPATH%
-set CLASSPATH=%XMLBEANS_HOME%\lib\resolver.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\SurfaceArea.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\Common.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\PcdTools.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\GenBuild.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\cpptasks.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Jars\frameworktasks.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Bin\FrameworkWizard.jar;%CLASSPATH%
-set CLASSPATH=%WORKSPACE%\Tools\Bin\MigrationTools.jar;%CLASSPATH%
-echo CLASSPATH: %CLASSPATH%
-goto end
+ @REM
+ @REM This just sets up the CLASSPATH, the rest of the environment should have been set already.
+ @REM
+ echo.
+ echo WORKSPACE: %WORKSPACE%
+ echo JAVA_HOME: %JAVA_HOME%
+ echo ANT_HOME: %ANT_HOME%
+ echo XMLBEANS_HOME: %XMLBEANS_HOME%
+ echo CYGWIN_HOME: %CYGWIN_HOME%
+ echo PATH: %PATH%
+ echo.
+ set CLASSPATH=%XMLBEANS_HOME%\lib;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\jsr173_1.0_api.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\xbean.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\xbean_xpath.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\xmlpublic.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8-dom.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\saxon8-xpath.jar;%CLASSPATH%
+ set CLASSPATH=%XMLBEANS_HOME%\lib\resolver.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\SurfaceArea.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\Common.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\PcdTools.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\GenBuild.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\cpptasks.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Jars\frameworktasks.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Bin\FrameworkWizard.jar;%CLASSPATH%
+ set CLASSPATH=%WORKSPACE%\Tools\Bin\MigrationTools.jar;%CLASSPATH%
+ echo CLASSPATH: %CLASSPATH%
+ goto end
:Reconfig
-@REM
-@REM Reinstall all config files
-@REM
-call ant -f %WORKSPACE%\Tools\build.xml reconfig
-goto end
+ @REM
+ @REM Reinstall all config files
+ @REM
+ call ant -f %WORKSPACE%\Tools\build.xml reconfig
+ goto end
:Usage
-echo.
-echo Usage: "%0 [--nt32] [NewBuild | Rebuild | ForceRebuild | Reconfig]"
-echo --nt32 Call vsvars32.bat for NT32 platform build
-echo NewBuild Using new build tools in BaseTools package
-echo Rebuild Incremental build, only build those updated tools (Ant build only)
-echo ForceRebuild Rebuild all tools neither updated or not (Ant build only)
-echo Reconfig Reinstall target.txt, tools_def.txt, FrameworkDatabase.db (Ant build only)
-echo.
-echo Note that target.template, tools_def.template, FrameworkDatabase.template will be
-echo only copied to target.txt, tools_def.txt, FrameworkDatabase.db respectively if they
-echo are not existed. Using option [Reconfig] to do the force copy.
-echo.
-@goto end
-
-:NewBuild
-@IF NOT EXIST "BaseTools\toolsetup.bat" goto AntBuild
-if not defined EDK_TOOLS_PATH set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools
-@call BaseTools\toolsetup.bat
-@goto end
+ echo.
+ echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [--nt32] [AntBuild | Rebuild | ForceRebuild ] [Reconfig]"
+ echo --nt32 Call vsvars32.bat for NT32 platform build.
+ echo.
+ echo Rebuild If sources are available perform an Incremental build, only
+ echo build those updated tools.
+ echo ForceRebuild If sources are available, rebuild all tools regardless of
+ echo whether they have been updated or not.
+ echo Reconfig Reinstall target.txt, tools_def.txt and build_rule.txt.
+ echo.
+ echo JAVA/ANT Build
+ echo AntBuild Using older Java/ANT build tools in Tools directory.
+ echo Rebuild Incremental build, only build those updated tools.
+ echo ForceRebuild Rebuild all tools regardless of whether they have been updated or not.
+ echo Reconfig Reinstall target.txt, tools_def.txt and FrameworkDatabase.db.
+ echo.
+ echo Note that target.template, tools_def.template, build_rules.template and the
+ echo FrameworkDatabase.template will be only copied to target.txt, tools_def.txt, build_rule.txt and
+ echo FrameworkDatabase.db respectively if they do not exist. Using option [Reconfig] to force the copy.
+ echo.
+ @goto end
:end
-@popd
-@echo on
+ @popd
+ @echo on
|