summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MdeModulePkg/Universal/Console/TerminalDxe/Ansi.c158
-rw-r--r--MdeModulePkg/Universal/Console/TerminalDxe/TerminalConIn.c3144
-rw-r--r--MdeModulePkg/Universal/Console/TerminalDxe/Vtutf8.c656
3 files changed, 1980 insertions, 1978 deletions
diff --git a/MdeModulePkg/Universal/Console/TerminalDxe/Ansi.c b/MdeModulePkg/Universal/Console/TerminalDxe/Ansi.c
index 4f84cc0..15147c1 100644
--- a/MdeModulePkg/Universal/Console/TerminalDxe/Ansi.c
+++ b/MdeModulePkg/Universal/Console/TerminalDxe/Ansi.c
@@ -1,79 +1,79 @@
-/** @file
- Implementation of translation upon PC ANSI.
-
-Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include "Terminal.h"
-
-/**
- Translate all raw data in the Raw FIFO into unicode, and insert
- them into Unicode FIFO.
-
- @param TerminalDevice The terminal device.
-
-**/
-VOID
-AnsiRawDataToUnicode (
- IN TERMINAL_DEV *TerminalDevice
- )
-{
- UINT8 RawData;
-
- //
- // pop the raw data out from the raw fifo,
- // and translate it into unicode, then push
- // the unicode into unicode fifo, until the raw fifo is empty.
- //
- while (!IsRawFiFoEmpty (TerminalDevice) && !IsUnicodeFiFoFull(TerminalDevice) ) {
-
- RawFiFoRemoveOneKey (TerminalDevice, &RawData);
-
- UnicodeFiFoInsertOneKey (TerminalDevice, (UINT16) RawData);
- }
-}
-
-/**
- Check if input string is valid Ascii string, valid EFI control characters
- or valid text graphics.
-
- @param TerminalDevice The terminal device.
- @param WString The input string.
-
- @retval EFI_UNSUPPORTED If not all input characters are valid.
- @retval EFI_SUCCESS If all input characters are valid.
-
-**/
-EFI_STATUS
-AnsiTestString (
- IN TERMINAL_DEV *TerminalDevice,
- IN CHAR16 *WString
- )
-{
- CHAR8 GraphicChar;
-
- //
- // support three kind of character:
- // valid ascii, valid efi control char, valid text graphics.
- //
- for (; *WString != CHAR_NULL; WString++) {
-
- if ( !(TerminalIsValidAscii (*WString) ||
- TerminalIsValidEfiCntlChar (*WString) ||
- TerminalIsValidTextGraphics (*WString, &GraphicChar, NULL) )) {
-
- return EFI_UNSUPPORTED;
- }
- }
-
- return EFI_SUCCESS;
-}
+/** @file
+ Implementation of translation upon PC ANSI.
+
+Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#include "Terminal.h"
+
+/**
+ Translate all raw data in the Raw FIFO into unicode, and insert
+ them into Unicode FIFO.
+
+ @param TerminalDevice The terminal device.
+
+**/
+VOID
+AnsiRawDataToUnicode (
+ IN TERMINAL_DEV *TerminalDevice
+ )
+{
+ UINT8 RawData;
+
+ //
+ // pop the raw data out from the raw fifo,
+ // and translate it into unicode, then push
+ // the unicode into unicode fifo, until the raw fifo is empty.
+ //
+ while (!IsRawFiFoEmpty (TerminalDevice) && !IsUnicodeFiFoFull (TerminalDevice)) {
+
+ RawFiFoRemoveOneKey (TerminalDevice, &RawData);
+
+ UnicodeFiFoInsertOneKey (TerminalDevice, (UINT16) RawData);
+ }
+}
+
+/**
+ Check if input string is valid Ascii string, valid EFI control characters
+ or valid text graphics.
+
+ @param TerminalDevice The terminal device.
+ @param WString The input string.
+
+ @retval EFI_UNSUPPORTED If not all input characters are valid.
+ @retval EFI_SUCCESS If all input characters are valid.
+
+**/
+EFI_STATUS
+AnsiTestString (
+ IN TERMINAL_DEV *TerminalDevice,
+ IN CHAR16 *WString
+ )
+{
+ CHAR8 GraphicChar;
+
+ //
+ // support three kind of character:
+ // valid ascii, valid efi control char, valid text graphics.
+ //
+ for (; *WString != CHAR_NULL; WString++) {
+
+ if ( !(TerminalIsValidAscii (*WString) ||
+ TerminalIsValidEfiCntlChar (*WString) ||
+ TerminalIsValidTextGraphics (*WString, &GraphicChar, NULL) )) {
+
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/MdeModulePkg/Universal/Console/TerminalDxe/TerminalConIn.c b/MdeModulePkg/Universal/Console/TerminalDxe/TerminalConIn.c
index 662cd56..47881a9 100644
--- a/MdeModulePkg/Universal/Console/TerminalDxe/TerminalConIn.c
+++ b/MdeModulePkg/Universal/Console/TerminalDxe/TerminalConIn.c
@@ -1,1571 +1,1573 @@
-/** @file
- Implementation for EFI_SIMPLE_TEXT_INPUT_PROTOCOL protocol.
-
-Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "Terminal.h"
-
-
-/**
- Reads the next keystroke from the input device. The WaitForKey Event can
- be used to test for existence of a keystroke via WaitForEvent () call.
-
- @param TerminalDevice Terminal driver private structure
- @param KeyData A pointer to a buffer that is filled in with the
- keystroke state data for the key that was
- pressed.
-
- @retval EFI_SUCCESS The keystroke information was returned.
- @retval EFI_NOT_READY There was no keystroke data available.
- @retval EFI_INVALID_PARAMETER KeyData is NULL.
-
-**/
-EFI_STATUS
-ReadKeyStrokeWorker (
- IN TERMINAL_DEV *TerminalDevice,
- OUT EFI_KEY_DATA *KeyData
- )
-{
- if (KeyData == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (!EfiKeyFiFoRemoveOneKey (TerminalDevice, &KeyData->Key)) {
- return EFI_NOT_READY;
- }
-
- KeyData->KeyState.KeyShiftState = 0;
- KeyData->KeyState.KeyToggleState = 0;
-
-
- return EFI_SUCCESS;
-
-}
-
-/**
- Implements EFI_SIMPLE_TEXT_INPUT_PROTOCOL.Reset().
- This driver only perform dependent serial device reset regardless of
- the value of ExtendeVerification
-
- @param This Indicates the calling context.
- @param ExtendedVerification Skip by this driver.
-
- @retval EFI_SUCCESS The reset operation succeeds.
- @retval EFI_DEVICE_ERROR The dependent serial port reset fails.
-
-**/
-EFI_STATUS
-EFIAPI
-TerminalConInReset (
- IN EFI_SIMPLE_TEXT_INPUT_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-{
- EFI_STATUS Status;
- TERMINAL_DEV *TerminalDevice;
-
- TerminalDevice = TERMINAL_CON_IN_DEV_FROM_THIS (This);
-
- //
- // Report progress code here
- //
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_PROGRESS_CODE,
- (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_PC_RESET),
- TerminalDevice->DevicePath
- );
-
- Status = TerminalDevice->SerialIo->Reset (TerminalDevice->SerialIo);
-
- //
- // Make all the internal buffer empty for keys
- //
- TerminalDevice->RawFiFo->Head = TerminalDevice->RawFiFo->Tail;
- TerminalDevice->UnicodeFiFo->Head = TerminalDevice->UnicodeFiFo->Tail;
- TerminalDevice->EfiKeyFiFo->Head = TerminalDevice->EfiKeyFiFo->Tail;
-
- if (EFI_ERROR (Status)) {
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_CONTROLLER_ERROR),
- TerminalDevice->DevicePath
- );
- }
-
- return Status;
-}
-
-/**
- Implements EFI_SIMPLE_TEXT_INPUT_PROTOCOL.ReadKeyStroke().
-
- @param This Indicates the calling context.
- @param Key A pointer to a buffer that is filled in with the
- keystroke information for the key that was sent
- from terminal.
-
- @retval EFI_SUCCESS The keystroke information is returned successfully.
- @retval EFI_NOT_READY There is no keystroke data available.
- @retval EFI_DEVICE_ERROR The dependent serial device encounters error.
-
-**/
-EFI_STATUS
-EFIAPI
-TerminalConInReadKeyStroke (
- IN EFI_SIMPLE_TEXT_INPUT_PROTOCOL *This,
- OUT EFI_INPUT_KEY *Key
- )
-{
- TERMINAL_DEV *TerminalDevice;
- EFI_STATUS Status;
- EFI_KEY_DATA KeyData;
-
- //
- // get TERMINAL_DEV from "This" parameter.
- //
- TerminalDevice = TERMINAL_CON_IN_DEV_FROM_THIS (This);
-
- Status = ReadKeyStrokeWorker (TerminalDevice, &KeyData);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- CopyMem (Key, &KeyData.Key, sizeof (EFI_INPUT_KEY));
-
- return EFI_SUCCESS;
-
-}
-
-/**
- Check if the key already has been registered.
-
- If both RegsiteredData and InputData is NULL, then ASSERT().
-
- @param RegsiteredData A pointer to a buffer that is filled in with the
- keystroke state data for the key that was
- registered.
- @param InputData A pointer to a buffer that is filled in with the
- keystroke state data for the key that was
- pressed.
-
- @retval TRUE Key be pressed matches a registered key.
- @retval FLASE Match failed.
-
-**/
-BOOLEAN
-IsKeyRegistered (
- IN EFI_KEY_DATA *RegsiteredData,
- IN EFI_KEY_DATA *InputData
- )
-{
- ASSERT (RegsiteredData != NULL && InputData != NULL);
-
- if ((RegsiteredData->Key.ScanCode != InputData->Key.ScanCode) ||
- (RegsiteredData->Key.UnicodeChar != InputData->Key.UnicodeChar)) {
- return FALSE;
- }
-
- return TRUE;
-}
-
-
-
-/**
- Event notification function for EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.WaitForKeyEx event
- Signal the event if there is key available
-
- @param Event Indicates the event that invoke this function.
- @param Context Indicates the calling context.
-
-**/
-VOID
-EFIAPI
-TerminalConInWaitForKeyEx (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- TerminalConInWaitForKey (Event, Context);
-}
-
-//
-// Simple Text Input Ex protocol functions
-//
-
-/**
- Reset the input device and optionally run diagnostics
-
- @param This Protocol instance pointer.
- @param ExtendedVerification Driver may perform diagnostics on reset.
-
- @retval EFI_SUCCESS The device was reset.
- @retval EFI_DEVICE_ERROR The device is not functioning properly and could
- not be reset.
-
-**/
-EFI_STATUS
-EFIAPI
-TerminalConInResetEx (
- IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-{
- EFI_STATUS Status;
- TERMINAL_DEV *TerminalDevice;
-
- TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
-
- Status = TerminalDevice->SimpleInput.Reset (&TerminalDevice->SimpleInput, ExtendedVerification);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-
-}
-
-
-/**
- Reads the next keystroke from the input device. The WaitForKey Event can
- be used to test for existence of a keystroke via WaitForEvent () call.
-
- @param This Protocol instance pointer.
- @param KeyData A pointer to a buffer that is filled in with the
- keystroke state data for the key that was
- pressed.
-
- @retval EFI_SUCCESS The keystroke information was returned.
- @retval EFI_NOT_READY There was no keystroke data available.
- @retval EFI_DEVICE_ERROR The keystroke information was not returned due
- to hardware errors.
- @retval EFI_INVALID_PARAMETER KeyData is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-TerminalConInReadKeyStrokeEx (
- IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
- OUT EFI_KEY_DATA *KeyData
- )
-{
- TERMINAL_DEV *TerminalDevice;
-
- if (KeyData == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
-
- return ReadKeyStrokeWorker (TerminalDevice, KeyData);
-
-}
-
-
-/**
- Set certain state for the input device.
-
- @param This Protocol instance pointer.
- @param KeyToggleState A pointer to the EFI_KEY_TOGGLE_STATE to set the
- state for the input device.
-
- @retval EFI_SUCCESS The device state was set successfully.
- @retval EFI_DEVICE_ERROR The device is not functioning correctly and
- could not have the setting adjusted.
- @retval EFI_UNSUPPORTED The device does not have the ability to set its
- state.
- @retval EFI_INVALID_PARAMETER KeyToggleState is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-TerminalConInSetState (
- IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
- IN EFI_KEY_TOGGLE_STATE *KeyToggleState
- )
-{
- if (KeyToggleState == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- return EFI_SUCCESS;
-}
-
-
-/**
- Register a notification function for a particular keystroke for the input device.
-
- @param This Protocol instance pointer.
- @param KeyData A pointer to a buffer that is filled in with the
- keystroke information data for the key that was
- pressed.
- @param KeyNotificationFunction Points to the function to be called when the key
- sequence is typed specified by KeyData.
- @param NotifyHandle Points to the unique handle assigned to the
- registered notification.
-
- @retval EFI_SUCCESS The notification function was registered
- successfully.
- @retval EFI_OUT_OF_RESOURCES Unable to allocate resources for necessary data
- structures.
- @retval EFI_INVALID_PARAMETER KeyData or NotifyHandle is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-TerminalConInRegisterKeyNotify (
- IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
- IN EFI_KEY_DATA *KeyData,
- IN EFI_KEY_NOTIFY_FUNCTION KeyNotificationFunction,
- OUT EFI_HANDLE *NotifyHandle
- )
-{
- TERMINAL_DEV *TerminalDevice;
- TERMINAL_CONSOLE_IN_EX_NOTIFY *NewNotify;
- LIST_ENTRY *Link;
- LIST_ENTRY *NotifyList;
- TERMINAL_CONSOLE_IN_EX_NOTIFY *CurrentNotify;
-
- if (KeyData == NULL || NotifyHandle == NULL || KeyNotificationFunction == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
-
- //
- // Return EFI_SUCCESS if the (KeyData, NotificationFunction) is already registered.
- //
- NotifyList = &TerminalDevice->NotifyList;
- for (Link = GetFirstNode (NotifyList); !IsNull (NotifyList,Link); Link = GetNextNode (NotifyList,Link)) {
- CurrentNotify = CR (
- Link,
- TERMINAL_CONSOLE_IN_EX_NOTIFY,
- NotifyEntry,
- TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE
- );
- if (IsKeyRegistered (&CurrentNotify->KeyData, KeyData)) {
- if (CurrentNotify->KeyNotificationFn == KeyNotificationFunction) {
- *NotifyHandle = CurrentNotify->NotifyHandle;
- return EFI_SUCCESS;
- }
- }
- }
-
- //
- // Allocate resource to save the notification function
- //
- NewNotify = (TERMINAL_CONSOLE_IN_EX_NOTIFY *) AllocateZeroPool (sizeof (TERMINAL_CONSOLE_IN_EX_NOTIFY));
- if (NewNotify == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- NewNotify->Signature = TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE;
- NewNotify->KeyNotificationFn = KeyNotificationFunction;
- NewNotify->NotifyHandle = (EFI_HANDLE) NewNotify;
- CopyMem (&NewNotify->KeyData, KeyData, sizeof (KeyData));
- InsertTailList (&TerminalDevice->NotifyList, &NewNotify->NotifyEntry);
-
- *NotifyHandle = NewNotify->NotifyHandle;
-
- return EFI_SUCCESS;
-}
-
-
-/**
- Remove a registered notification function from a particular keystroke.
-
- @param This Protocol instance pointer.
- @param NotificationHandle The handle of the notification function being
- unregistered.
-
- @retval EFI_SUCCESS The notification function was unregistered
- successfully.
- @retval EFI_INVALID_PARAMETER The NotificationHandle is invalid.
-
-**/
-EFI_STATUS
-EFIAPI
-TerminalConInUnregisterKeyNotify (
- IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
- IN EFI_HANDLE NotificationHandle
- )
-{
- TERMINAL_DEV *TerminalDevice;
- LIST_ENTRY *Link;
- TERMINAL_CONSOLE_IN_EX_NOTIFY *CurrentNotify;
- LIST_ENTRY *NotifyList;
-
- if (NotificationHandle == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (((TERMINAL_CONSOLE_IN_EX_NOTIFY *) NotificationHandle)->Signature != TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE) {
- return EFI_INVALID_PARAMETER;
- }
-
- TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
-
- NotifyList = &TerminalDevice->NotifyList;
- for (Link = GetFirstNode (NotifyList); !IsNull (NotifyList,Link); Link = GetNextNode (NotifyList,Link)) {
- CurrentNotify = CR (
- Link,
- TERMINAL_CONSOLE_IN_EX_NOTIFY,
- NotifyEntry,
- TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE
- );
- if (CurrentNotify->NotifyHandle == NotificationHandle) {
- //
- // Remove the notification function from NotifyList and free resources
- //
- RemoveEntryList (&CurrentNotify->NotifyEntry);
-
- gBS->FreePool (CurrentNotify);
- return EFI_SUCCESS;
- }
- }
-
- //
- // Can not find the matching entry in database.
- //
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Translate raw data into Unicode (according to different encode), and
- translate Unicode into key information. (according to different standard).
-
- @param TerminalDevice Terminal driver private structure.
-
-**/
-VOID
-TranslateRawDataToEfiKey (
- IN TERMINAL_DEV *TerminalDevice
- )
-{
- switch (TerminalDevice->TerminalType) {
-
- case PCANSITYPE:
- case VT100TYPE:
- case VT100PLUSTYPE:
- AnsiRawDataToUnicode (TerminalDevice);
- UnicodeToEfiKey (TerminalDevice);
- break;
-
- case VTUTF8TYPE:
- //
- // Process all the raw data in the RawFIFO,
- // put the processed key into UnicodeFIFO.
- //
- VTUTF8RawDataToUnicode (TerminalDevice);
-
- //
- // Translate all the Unicode data in the UnicodeFIFO to Efi key,
- // then put into EfiKeyFIFO.
- //
- UnicodeToEfiKey (TerminalDevice);
-
- break;
- }
-}
-
-/**
- Event notification function for EFI_SIMPLE_TEXT_INPUT_PROTOCOL.WaitForKey event
- Signal the event if there is key available
-
- @param Event Indicates the event that invoke this function.
- @param Context Indicates the calling context.
-
-**/
-VOID
-EFIAPI
-TerminalConInWaitForKey (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- //
- // Someone is waiting on the keystroke event, if there's
- // a key pending, signal the event
- //
- if (!IsEfiKeyFiFoEmpty ((TERMINAL_DEV *) Context)) {
-
- gBS->SignalEvent (Event);
- }
-}
-
-/**
- Timer handler to poll the key from serial.
-
- @param Event Indicates the event that invoke this function.
- @param Context Indicates the calling context.
-**/
-VOID
-EFIAPI
-TerminalConInTimerHandler (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- EFI_STATUS Status;
- TERMINAL_DEV *TerminalDevice;
- UINT8 Input;
- EFI_SERIAL_IO_MODE *Mode;
- EFI_SERIAL_IO_PROTOCOL *SerialIo;
- UINTN SerialInTimeOut;
-
- TerminalDevice = (TERMINAL_DEV *) Context;
-
- SerialIo = TerminalDevice->SerialIo;
- if (SerialIo == NULL) {
- return ;
- }
- //
- // if current timeout value for serial device is not identical with
- // the value saved in TERMINAL_DEV structure, then recalculate the
- // timeout value again and set serial attribute according to this value.
- //
- Mode = SerialIo->Mode;
- if (Mode->Timeout != TerminalDevice->SerialInTimeOut) {
-
- SerialInTimeOut = 0;
- if (Mode->BaudRate != 0) {
- //
- // According to BAUD rate to calculate the timeout value.
- //
- SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) * 2 * 1000000 / (UINTN) Mode->BaudRate;
- }
-
- Status = SerialIo->SetAttributes (
- SerialIo,
- Mode->BaudRate,
- Mode->ReceiveFifoDepth,
- (UINT32) SerialInTimeOut,
- (EFI_PARITY_TYPE) (Mode->Parity),
- (UINT8) Mode->DataBits,
- (EFI_STOP_BITS_TYPE) (Mode->StopBits)
- );
-
- if (EFI_ERROR (Status)) {
- TerminalDevice->SerialInTimeOut = 0;
- } else {
- TerminalDevice->SerialInTimeOut = SerialInTimeOut;
- }
- }
-
- //
- // Fetch all the keys in the serial buffer,
- // and insert the byte stream into RawFIFO.
- //
- while( !IsRawFiFoFull(TerminalDevice) ) {
-
- Status = GetOneKeyFromSerial (TerminalDevice->SerialIo, &Input);
-
- if (EFI_ERROR (Status)) {
- if (Status == EFI_DEVICE_ERROR) {
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_INPUT_ERROR),
- TerminalDevice->DevicePath
- );
- }
- break;
- }
-
- RawFiFoInsertOneKey (TerminalDevice, Input);
- }
-
- //
- // Translate all the raw data in RawFIFO into EFI Key,
- // according to different terminal type supported.
- //
- TranslateRawDataToEfiKey (TerminalDevice);
-}
-
-/**
- Get one key out of serial buffer.
-
- @param SerialIo Serial I/O protocol attached to the serial device.
- @param Output The fetched key.
-
- @retval EFI_NOT_READY If serial buffer is empty.
- @retval EFI_DEVICE_ERROR If reading serial buffer encounter error.
- @retval EFI_SUCCESS If reading serial buffer successfully, put
- the fetched key to the parameter output.
-
-**/
-EFI_STATUS
-GetOneKeyFromSerial (
- EFI_SERIAL_IO_PROTOCOL *SerialIo,
- UINT8 *Output
- )
-{
- EFI_STATUS Status;
- UINTN Size;
-
- Size = 1;
- *Output = 0;
-
- //
- // Read one key from serial I/O device.
- //
- Status = SerialIo->Read (SerialIo, &Size, Output);
-
- if (EFI_ERROR (Status)) {
-
- if (Status == EFI_TIMEOUT) {
- return EFI_NOT_READY;
- }
-
- return EFI_DEVICE_ERROR;
-
- }
-
- if (*Output == 0) {
- return EFI_NOT_READY;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Insert one byte raw data into the Raw Data FIFO.
-
- @param TerminalDevice Terminal driver private structure.
- @param Input The key will be input.
-
- @retval TRUE If insert successfully.
- @retval FLASE If Raw Data buffer is full before key insertion,
- and the key is lost.
-
-**/
-BOOLEAN
-RawFiFoInsertOneKey (
- TERMINAL_DEV *TerminalDevice,
- UINT8 Input
- )
-{
- UINT8 Tail;
-
- Tail = TerminalDevice->RawFiFo->Tail;
-
- if (IsRawFiFoFull (TerminalDevice)) {
- //
- // Raw FIFO is full
- //
- return FALSE;
- }
-
- TerminalDevice->RawFiFo->Data[Tail] = Input;
-
- TerminalDevice->RawFiFo->Tail = (UINT8) ((Tail + 1) % (RAW_FIFO_MAX_NUMBER + 1));
-
- return TRUE;
-}
-
-/**
- Remove one pre-fetched key out of the Raw Data FIFO.
-
- @param TerminalDevice Terminal driver private structure.
- @param Output The key will be removed.
-
- @retval TRUE If insert successfully.
- @retval FLASE If Raw Data FIFO buffer is empty before remove operation.
-
-**/
-BOOLEAN
-RawFiFoRemoveOneKey (
- TERMINAL_DEV *TerminalDevice,
- UINT8 *Output
- )
-{
- UINT8 Head;
-
- Head = TerminalDevice->RawFiFo->Head;
-
- if (IsRawFiFoEmpty (TerminalDevice)) {
- //
- // FIFO is empty
- //
- *Output = 0;
- return FALSE;
- }
-
- *Output = TerminalDevice->RawFiFo->Data[Head];
-
- TerminalDevice->RawFiFo->Head = (UINT8) ((Head + 1) % (RAW_FIFO_MAX_NUMBER + 1));
-
- return TRUE;
-}
-
-/**
- Clarify whether Raw Data FIFO buffer is empty.
-
- @param TerminalDevice Terminal driver private structure
-
- @retval TRUE If Raw Data FIFO buffer is empty.
- @retval FLASE If Raw Data FIFO buffer is not empty.
-
-**/
-BOOLEAN
-IsRawFiFoEmpty (
- TERMINAL_DEV *TerminalDevice
- )
-{
- if (TerminalDevice->RawFiFo->Head == TerminalDevice->RawFiFo->Tail) {
- return TRUE;
- } else {
- return FALSE;
- }
-}
-
-/**
- Clarify whether Raw Data FIFO buffer is full.
-
- @param TerminalDevice Terminal driver private structure
-
- @retval TRUE If Raw Data FIFO buffer is full.
- @retval FLASE If Raw Data FIFO buffer is not full.
-
-**/
-BOOLEAN
-IsRawFiFoFull (
- TERMINAL_DEV *TerminalDevice
- )
-{
- UINT8 Tail;
- UINT8 Head;
-
- Tail = TerminalDevice->RawFiFo->Tail;
- Head = TerminalDevice->RawFiFo->Head;
-
- if (((Tail + 1) % (RAW_FIFO_MAX_NUMBER + 1)) == Head) {
-
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Insert one pre-fetched key into the FIFO buffer.
-
- @param TerminalDevice Terminal driver private structure.
- @param Key The key will be input.
-
- @retval TRUE If insert successfully.
- @retval FLASE If FIFO buffer is full before key insertion,
- and the key is lost.
-
-**/
-BOOLEAN
-EfiKeyFiFoInsertOneKey (
- TERMINAL_DEV *TerminalDevice,
- EFI_INPUT_KEY *Key
- )
-{
- UINT8 Tail;
- LIST_ENTRY *Link;
- LIST_ENTRY *NotifyList;
- TERMINAL_CONSOLE_IN_EX_NOTIFY *CurrentNotify;
- EFI_KEY_DATA KeyData;
-
- Tail = TerminalDevice->EfiKeyFiFo->Tail;
-
- CopyMem (&KeyData.Key, Key, sizeof (EFI_INPUT_KEY));
- KeyData.KeyState.KeyShiftState = 0;
- KeyData.KeyState.KeyToggleState = 0;
-
- //
- // Invoke notification functions if exist
- //
- NotifyList = &TerminalDevice->NotifyList;
- for (Link = GetFirstNode (NotifyList); !IsNull (NotifyList,Link); Link = GetNextNode (NotifyList,Link)) {
- CurrentNotify = CR (
- Link,
- TERMINAL_CONSOLE_IN_EX_NOTIFY,
- NotifyEntry,
- TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE
- );
- if (IsKeyRegistered (&CurrentNotify->KeyData, &KeyData)) {
- CurrentNotify->KeyNotificationFn (&KeyData);
- }
- }
- if (IsEfiKeyFiFoFull (TerminalDevice)) {
- //
- // Efi Key FIFO is full
- //
- return FALSE;
- }
-
- CopyMem (&TerminalDevice->EfiKeyFiFo->Data[Tail], Key, sizeof (EFI_INPUT_KEY));
-
- TerminalDevice->EfiKeyFiFo->Tail = (UINT8) ((Tail + 1) % (FIFO_MAX_NUMBER + 1));
-
- return TRUE;
-}
-
-/**
- Remove one pre-fetched key out of the FIFO buffer.
-
- @param TerminalDevice Terminal driver private structure.
- @param Output The key will be removed.
-
- @retval TRUE If insert successfully.
- @retval FLASE If FIFO buffer is empty before remove operation.
-
-**/
-BOOLEAN
-EfiKeyFiFoRemoveOneKey (
- TERMINAL_DEV *TerminalDevice,
- EFI_INPUT_KEY *Output
- )
-{
- UINT8 Head;
-
- Head = TerminalDevice->EfiKeyFiFo->Head;
- ASSERT (Head < FIFO_MAX_NUMBER + 1);
-
- if (IsEfiKeyFiFoEmpty (TerminalDevice)) {
- //
- // FIFO is empty
- //
- Output->ScanCode = SCAN_NULL;
- Output->UnicodeChar = 0;
- return FALSE;
- }
-
- *Output = TerminalDevice->EfiKeyFiFo->Data[Head];
-
- TerminalDevice->EfiKeyFiFo->Head = (UINT8) ((Head + 1) % (FIFO_MAX_NUMBER + 1));
-
- return TRUE;
-}
-
-/**
- Clarify whether FIFO buffer is empty.
-
- @param TerminalDevice Terminal driver private structure
-
- @retval TRUE If FIFO buffer is empty.
- @retval FLASE If FIFO buffer is not empty.
-
-**/
-BOOLEAN
-IsEfiKeyFiFoEmpty (
- TERMINAL_DEV *TerminalDevice
- )
-{
- if (TerminalDevice->EfiKeyFiFo->Head == TerminalDevice->EfiKeyFiFo->Tail) {
- return TRUE;
- } else {
- return FALSE;
- }
-}
-
-/**
- Clarify whether FIFO buffer is full.
-
- @param TerminalDevice Terminal driver private structure
-
- @retval TRUE If FIFO buffer is full.
- @retval FLASE If FIFO buffer is not full.
-
-**/
-BOOLEAN
-IsEfiKeyFiFoFull (
- TERMINAL_DEV *TerminalDevice
- )
-{
- UINT8 Tail;
- UINT8 Head;
-
- Tail = TerminalDevice->EfiKeyFiFo->Tail;
- Head = TerminalDevice->EfiKeyFiFo->Head;
-
- if (((Tail + 1) % (FIFO_MAX_NUMBER + 1)) == Head) {
-
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Insert one pre-fetched key into the Unicode FIFO buffer.
-
- @param TerminalDevice Terminal driver private structure.
- @param Input The key will be input.
-
- @retval TRUE If insert successfully.
- @retval FLASE If Unicode FIFO buffer is full before key insertion,
- and the key is lost.
-
-**/
-BOOLEAN
-UnicodeFiFoInsertOneKey (
- TERMINAL_DEV *TerminalDevice,
- UINT16 Input
- )
-{
- UINT8 Tail;
-
- Tail = TerminalDevice->UnicodeFiFo->Tail;
- ASSERT (Tail < FIFO_MAX_NUMBER + 1);
-
-
- if (IsUnicodeFiFoFull (TerminalDevice)) {
- //
- // Unicode FIFO is full
- //
- return FALSE;
- }
-
- TerminalDevice->UnicodeFiFo->Data[Tail] = Input;
-
- TerminalDevice->UnicodeFiFo->Tail = (UINT8) ((Tail + 1) % (FIFO_MAX_NUMBER + 1));
-
- return TRUE;
-}
-
-/**
- Remove one pre-fetched key out of the Unicode FIFO buffer.
-
- @param TerminalDevice Terminal driver private structure.
- @param Output The key will be removed.
-
- @retval TRUE If insert successfully.
- @retval FLASE If Unicode FIFO buffer is empty before remove operation.
-
-**/
-BOOLEAN
-UnicodeFiFoRemoveOneKey (
- TERMINAL_DEV *TerminalDevice,
- UINT16 *Output
- )
-{
- UINT8 Head;
-
- Head = TerminalDevice->UnicodeFiFo->Head;
- ASSERT (Head < FIFO_MAX_NUMBER + 1);
-
- if (IsUnicodeFiFoEmpty (TerminalDevice)) {
- //
- // FIFO is empty
- //
- Output = NULL;
- return FALSE;
- }
-
- *Output = TerminalDevice->UnicodeFiFo->Data[Head];
-
- TerminalDevice->UnicodeFiFo->Head = (UINT8) ((Head + 1) % (FIFO_MAX_NUMBER + 1));
-
- return TRUE;
-}
-
-/**
- Clarify whether Unicode FIFO buffer is empty.
-
- @param TerminalDevice Terminal driver private structure
-
- @retval TRUE If Unicode FIFO buffer is empty.
- @retval FLASE If Unicode FIFO buffer is not empty.
-
-**/
-BOOLEAN
-IsUnicodeFiFoEmpty (
- TERMINAL_DEV *TerminalDevice
- )
-{
- if (TerminalDevice->UnicodeFiFo->Head == TerminalDevice->UnicodeFiFo->Tail) {
- return TRUE;
- } else {
- return FALSE;
- }
-}
-
-/**
- Clarify whether Unicode FIFO buffer is full.
-
- @param TerminalDevice Terminal driver private structure
-
- @retval TRUE If Unicode FIFO buffer is full.
- @retval FLASE If Unicode FIFO buffer is not full.
-
-**/
-BOOLEAN
-IsUnicodeFiFoFull (
- TERMINAL_DEV *TerminalDevice
- )
-{
- UINT8 Tail;
- UINT8 Head;
-
- Tail = TerminalDevice->UnicodeFiFo->Tail;
- Head = TerminalDevice->UnicodeFiFo->Head;
-
- if (((Tail + 1) % (FIFO_MAX_NUMBER + 1)) == Head) {
-
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Count Unicode FIFO buffer.
-
- @param TerminalDevice Terminal driver private structure
-
- @return The count in bytes of Unicode FIFO.
-
-**/
-UINT8
-UnicodeFiFoGetKeyCount (
- TERMINAL_DEV *TerminalDevice
- )
-{
- UINT8 Tail;
- UINT8 Head;
-
- Tail = TerminalDevice->UnicodeFiFo->Tail;
- Head = TerminalDevice->UnicodeFiFo->Head;
-
- if (Tail >= Head) {
- return (UINT8) (Tail - Head);
- } else {
- return (UINT8) (Tail + FIFO_MAX_NUMBER + 1 - Head);
- }
-}
-
-/**
- Update the Unicode characters from a terminal input device into EFI Keys FIFO.
-
- @param TerminalDevice The terminal device to use to translate raw input into EFI Keys
-
-**/
-VOID
-UnicodeToEfiKeyFlushState (
- IN TERMINAL_DEV *TerminalDevice
- )
-{
- EFI_INPUT_KEY Key;
- UINT32 InputState;
-
- InputState = TerminalDevice->InputState;
-
- if( IsEfiKeyFiFoFull(TerminalDevice) ) return;
-
- if ((InputState & INPUT_STATE_ESC) != 0) {
- Key.ScanCode = SCAN_ESC;
- Key.UnicodeChar = 0;
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- }
-
- if ((InputState & INPUT_STATE_CSI) != 0) {
- Key.ScanCode = SCAN_NULL;
- Key.UnicodeChar = CSI;
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- }
-
- if ((InputState & INPUT_STATE_LEFTOPENBRACKET) != 0) {
- Key.ScanCode = SCAN_NULL;
- Key.UnicodeChar = LEFTOPENBRACKET;
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- }
-
- if ((InputState & INPUT_STATE_O) != 0) {
- Key.ScanCode = SCAN_NULL;
- Key.UnicodeChar = 'O';
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- }
-
- if ((InputState & INPUT_STATE_2) != 0) {
- Key.ScanCode = SCAN_NULL;
- Key.UnicodeChar = '2';
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- }
-
- //
- // Cancel the timer.
- //
- gBS->SetTimer (
- TerminalDevice->TwoSecondTimeOut,
- TimerCancel,
- 0
- );
-
- TerminalDevice->InputState = INPUT_STATE_DEFAULT;
-}
-
-
-/**
- Converts a stream of Unicode characters from a terminal input device into EFI Keys that
- can be read through the Simple Input Protocol.
-
- The table below shows the keyboard input mappings that this function supports.
- If the ESC sequence listed in one of the columns is presented, then it is translated
- into the corresponding EFI Scan Code. If a matching sequence is not found, then the raw
- key strokes are converted into EFI Keys.
-
- 2 seconds are allowed for an ESC sequence to be completed. If the ESC sequence is not
- completed in 2 seconds, then the raw key strokes of the partial ESC sequence are
- converted into EFI Keys.
- There is one special input sequence that will force the system to reset.
- This is ESC R ESC r ESC R.
-
- Note: current implementation support terminal types include: PC ANSI, VT100+/VTUTF8, VT100.
- The table below is not same with UEFI Spec 2.3 Appendix B Table 201(not support ANSI X3.64 /
- DEC VT200-500 and extra support PC ANSI, VT100)since UEFI Table 201 is just an example.
-
- Symbols used in table below
- ===========================
- ESC = 0x1B
- CSI = 0x9B
- DEL = 0x7f
- ^ = CTRL
-
- +=========+======+===========+==========+==========+
- | | EFI | UEFI 2.0 | | |
- | | Scan | | VT100+ | |
- | KEY | Code | PC ANSI | VTUTF8 | VT100 |
- +=========+======+===========+==========+==========+
- | NULL | 0x00 | | | |
- | UP | 0x01 | ESC [ A | ESC [ A | ESC [ A |
- | DOWN | 0x02 | ESC [ B | ESC [ B | ESC [ B |
- | RIGHT | 0x03 | ESC [ C | ESC [ C | ESC [ C |
- | LEFT | 0x04 | ESC [ D | ESC [ D | ESC [ D |
- | HOME | 0x05 | ESC [ H | ESC h | ESC [ H |
- | END | 0x06 | ESC [ F | ESC k | ESC [ K |
- | INSERT | 0x07 | ESC [ @ | ESC + | ESC [ @ |
- | | | ESC [ L | | ESC [ L |
- | DELETE | 0x08 | ESC [ X | ESC - | ESC [ P |
- | PG UP | 0x09 | ESC [ I | ESC ? | ESC [ V |
- | | | | | ESC [ ? |
- | PG DOWN | 0x0A | ESC [ G | ESC / | ESC [ U |
- | | | | | ESC [ / |
- | F1 | 0x0B | ESC [ M | ESC 1 | ESC O P |
- | F2 | 0x0C | ESC [ N | ESC 2 | ESC O Q |
- | F3 | 0x0D | ESC [ O | ESC 3 | ESC O w |
- | F4 | 0x0E | ESC [ P | ESC 4 | ESC O x |
- | F5 | 0x0F | ESC [ Q | ESC 5 | ESC O t |
- | F6 | 0x10 | ESC [ R | ESC 6 | ESC O u |
- | F7 | 0x11 | ESC [ S | ESC 7 | ESC O q |
- | F8 | 0x12 | ESC [ T | ESC 8 | ESC O r |
- | F9 | 0x13 | ESC [ U | ESC 9 | ESC O p |
- | F10 | 0x14 | ESC [ V | ESC 0 | ESC O M |
- | Escape | 0x17 | ESC | ESC | ESC |
- | F11 | 0x15 | | ESC ! | |
- | F12 | 0x16 | | ESC @ | |
- +=========+======+===========+==========+==========+
-
- Special Mappings
- ================
- ESC R ESC r ESC R = Reset System
-
- @param TerminalDevice The terminal device to use to translate raw input into EFI Keys
-
-**/
-VOID
-UnicodeToEfiKey (
- IN TERMINAL_DEV *TerminalDevice
- )
-{
- EFI_STATUS Status;
- EFI_STATUS TimerStatus;
- UINT16 UnicodeChar;
- EFI_INPUT_KEY Key;
- BOOLEAN SetDefaultResetState;
-
- TimerStatus = gBS->CheckEvent (TerminalDevice->TwoSecondTimeOut);
-
- if (!EFI_ERROR (TimerStatus)) {
- UnicodeToEfiKeyFlushState (TerminalDevice);
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
- }
-
- while (!IsUnicodeFiFoEmpty(TerminalDevice) && !IsEfiKeyFiFoFull(TerminalDevice) ) {
-
- if (TerminalDevice->InputState != INPUT_STATE_DEFAULT) {
- //
- // Check to see if the 2 seconds timer has expired
- //
- TimerStatus = gBS->CheckEvent (TerminalDevice->TwoSecondTimeOut);
- if (!EFI_ERROR (TimerStatus)) {
- UnicodeToEfiKeyFlushState (TerminalDevice);
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
- }
- }
-
- //
- // Fetch one Unicode character from the Unicode FIFO
- //
- UnicodeFiFoRemoveOneKey (TerminalDevice, &UnicodeChar);
-
- SetDefaultResetState = TRUE;
-
- switch (TerminalDevice->InputState) {
- case INPUT_STATE_DEFAULT:
-
- break;
-
- case INPUT_STATE_ESC:
-
- if (UnicodeChar == LEFTOPENBRACKET) {
- TerminalDevice->InputState |= INPUT_STATE_LEFTOPENBRACKET;
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
- continue;
- }
-
- if (UnicodeChar == 'O' && TerminalDevice->TerminalType == VT100TYPE) {
- TerminalDevice->InputState |= INPUT_STATE_O;
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
- continue;
- }
-
- Key.ScanCode = SCAN_NULL;
-
- if (TerminalDevice->TerminalType == VT100PLUSTYPE ||
- TerminalDevice->TerminalType == VTUTF8TYPE) {
- switch (UnicodeChar) {
- case '1':
- Key.ScanCode = SCAN_F1;
- break;
- case '2':
- Key.ScanCode = SCAN_F2;
- break;
- case '3':
- Key.ScanCode = SCAN_F3;
- break;
- case '4':
- Key.ScanCode = SCAN_F4;
- break;
- case '5':
- Key.ScanCode = SCAN_F5;
- break;
- case '6':
- Key.ScanCode = SCAN_F6;
- break;
- case '7':
- Key.ScanCode = SCAN_F7;
- break;
- case '8':
- Key.ScanCode = SCAN_F8;
- break;
- case '9':
- Key.ScanCode = SCAN_F9;
- break;
- case '0':
- Key.ScanCode = SCAN_F10;
- break;
- case '!':
- Key.ScanCode = SCAN_F11;
- break;
- case '@':
- Key.ScanCode = SCAN_F12;
- break;
- case 'h':
- Key.ScanCode = SCAN_HOME;
- break;
- case 'k':
- Key.ScanCode = SCAN_END;
- break;
- case '+':
- Key.ScanCode = SCAN_INSERT;
- break;
- case '-':
- Key.ScanCode = SCAN_DELETE;
- break;
- case '/':
- Key.ScanCode = SCAN_PAGE_DOWN;
- break;
- case '?':
- Key.ScanCode = SCAN_PAGE_UP;
- break;
- default :
- break;
- }
- }
-
- switch (UnicodeChar) {
- case 'R':
- if (TerminalDevice->ResetState == RESET_STATE_DEFAULT) {
- TerminalDevice->ResetState = RESET_STATE_ESC_R;
- SetDefaultResetState = FALSE;
- } else if (TerminalDevice->ResetState == RESET_STATE_ESC_R_ESC_R) {
- gRT->ResetSystem (EfiResetWarm, EFI_SUCCESS, 0, NULL);
- }
- Key.ScanCode = SCAN_NULL;
- break;
- case 'r':
- if (TerminalDevice->ResetState == RESET_STATE_ESC_R) {
- TerminalDevice->ResetState = RESET_STATE_ESC_R_ESC_R;
- SetDefaultResetState = FALSE;
- }
- Key.ScanCode = SCAN_NULL;
- break;
- default :
- break;
- }
-
- if (SetDefaultResetState) {
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
- }
-
- if (Key.ScanCode != SCAN_NULL) {
- Key.UnicodeChar = 0;
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- TerminalDevice->InputState = INPUT_STATE_DEFAULT;
- UnicodeToEfiKeyFlushState (TerminalDevice);
- continue;
- }
-
- UnicodeToEfiKeyFlushState (TerminalDevice);
-
- break;
-
- case INPUT_STATE_ESC | INPUT_STATE_O:
-
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
-
- Key.ScanCode = SCAN_NULL;
-
- if (TerminalDevice->TerminalType == VT100TYPE) {
- switch (UnicodeChar) {
- case 'P':
- Key.ScanCode = SCAN_F1;
- break;
- case 'Q':
- Key.ScanCode = SCAN_F2;
- break;
- case 'w':
- Key.ScanCode = SCAN_F3;
- break;
- case 'x':
- Key.ScanCode = SCAN_F4;
- break;
- case 't':
- Key.ScanCode = SCAN_F5;
- break;
- case 'u':
- Key.ScanCode = SCAN_F6;
- break;
- case 'q':
- Key.ScanCode = SCAN_F7;
- break;
- case 'r':
- Key.ScanCode = SCAN_F8;
- break;
- case 'p':
- Key.ScanCode = SCAN_F9;
- break;
- case 'M':
- Key.ScanCode = SCAN_F10;
- break;
- default :
- break;
- }
- }
-
- if (Key.ScanCode != SCAN_NULL) {
- Key.UnicodeChar = 0;
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- TerminalDevice->InputState = INPUT_STATE_DEFAULT;
- UnicodeToEfiKeyFlushState (TerminalDevice);
- continue;
- }
-
- UnicodeToEfiKeyFlushState (TerminalDevice);
-
- break;
-
- case INPUT_STATE_ESC | INPUT_STATE_LEFTOPENBRACKET:
-
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
-
- Key.ScanCode = SCAN_NULL;
-
- if (TerminalDevice->TerminalType == PCANSITYPE ||
- TerminalDevice->TerminalType == VT100TYPE ||
- TerminalDevice->TerminalType == VT100PLUSTYPE ||
- TerminalDevice->TerminalType == VTUTF8TYPE) {
- switch (UnicodeChar) {
- case 'A':
- Key.ScanCode = SCAN_UP;
- break;
- case 'B':
- Key.ScanCode = SCAN_DOWN;
- break;
- case 'C':
- Key.ScanCode = SCAN_RIGHT;
- break;
- case 'D':
- Key.ScanCode = SCAN_LEFT;
- break;
- case 'H':
- if (TerminalDevice->TerminalType == PCANSITYPE ||
- TerminalDevice->TerminalType == VT100TYPE) {
- Key.ScanCode = SCAN_HOME;
- }
- break;
- case 'F':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_END;
- }
- break;
- case 'K':
- if (TerminalDevice->TerminalType == VT100TYPE) {
- Key.ScanCode = SCAN_END;
- }
- break;
- case 'L':
- case '@':
- if (TerminalDevice->TerminalType == PCANSITYPE ||
- TerminalDevice->TerminalType == VT100TYPE) {
- Key.ScanCode = SCAN_INSERT;
- }
- break;
- case 'X':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_DELETE;
- }
- break;
- case 'P':
- if (TerminalDevice->TerminalType == VT100TYPE) {
- Key.ScanCode = SCAN_DELETE;
- } else if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F4;
- }
- break;
- case 'I':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_PAGE_UP;
- }
- break;
- case 'V':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F10;
- }
- case '?':
- if (TerminalDevice->TerminalType == VT100TYPE) {
- Key.ScanCode = SCAN_PAGE_UP;
- }
- break;
- case 'G':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_PAGE_DOWN;
- }
- break;
- case 'U':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F9;
- }
- case '/':
- if (TerminalDevice->TerminalType == VT100TYPE) {
- Key.ScanCode = SCAN_PAGE_DOWN;
- }
- break;
- case 'M':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F1;
- }
- break;
- case 'N':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F2;
- }
- break;
- case 'O':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F3;
- }
- break;
- case 'Q':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F5;
- }
- break;
- case 'R':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F6;
- }
- break;
- case 'S':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F7;
- }
- break;
- case 'T':
- if (TerminalDevice->TerminalType == PCANSITYPE) {
- Key.ScanCode = SCAN_F8;
- }
- break;
- default :
- break;
- }
- }
-
- if (Key.ScanCode != SCAN_NULL) {
- Key.UnicodeChar = 0;
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- TerminalDevice->InputState = INPUT_STATE_DEFAULT;
- UnicodeToEfiKeyFlushState (TerminalDevice);
- continue;
- }
-
- UnicodeToEfiKeyFlushState (TerminalDevice);
-
- break;
-
-
- default:
- //
- // Invalid state. This should never happen.
- //
- ASSERT (FALSE);
-
- UnicodeToEfiKeyFlushState (TerminalDevice);
-
- break;
- }
-
- if (UnicodeChar == ESC) {
- TerminalDevice->InputState = INPUT_STATE_ESC;
- }
-
- if (UnicodeChar == CSI) {
- TerminalDevice->InputState = INPUT_STATE_CSI;
- }
-
- if (TerminalDevice->InputState != INPUT_STATE_DEFAULT) {
- Status = gBS->SetTimer(
- TerminalDevice->TwoSecondTimeOut,
- TimerRelative,
- (UINT64)20000000
- );
- ASSERT_EFI_ERROR (Status);
- continue;
- }
-
- if (SetDefaultResetState) {
- TerminalDevice->ResetState = RESET_STATE_DEFAULT;
- }
-
- if (UnicodeChar == DEL) {
- Key.ScanCode = SCAN_DELETE;
- Key.UnicodeChar = 0;
- } else {
- Key.ScanCode = SCAN_NULL;
- Key.UnicodeChar = UnicodeChar;
- }
-
- EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
- }
-}
+/** @file
+ Implementation for EFI_SIMPLE_TEXT_INPUT_PROTOCOL protocol.
+
+Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "Terminal.h"
+
+
+/**
+ Reads the next keystroke from the input device. The WaitForKey Event can
+ be used to test for existence of a keystroke via WaitForEvent () call.
+
+ @param TerminalDevice Terminal driver private structure
+ @param KeyData A pointer to a buffer that is filled in with the
+ keystroke state data for the key that was
+ pressed.
+
+ @retval EFI_SUCCESS The keystroke information was returned.
+ @retval EFI_NOT_READY There was no keystroke data available.
+ @retval EFI_INVALID_PARAMETER KeyData is NULL.
+
+**/
+EFI_STATUS
+ReadKeyStrokeWorker (
+ IN TERMINAL_DEV *TerminalDevice,
+ OUT EFI_KEY_DATA *KeyData
+ )
+{
+ if (KeyData == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!EfiKeyFiFoRemoveOneKey (TerminalDevice, &KeyData->Key)) {
+ return EFI_NOT_READY;
+ }
+
+ KeyData->KeyState.KeyShiftState = 0;
+ KeyData->KeyState.KeyToggleState = 0;
+
+
+ return EFI_SUCCESS;
+
+}
+
+/**
+ Implements EFI_SIMPLE_TEXT_INPUT_PROTOCOL.Reset().
+ This driver only perform dependent serial device reset regardless of
+ the value of ExtendeVerification
+
+ @param This Indicates the calling context.
+ @param ExtendedVerification Skip by this driver.
+
+ @retval EFI_SUCCESS The reset operation succeeds.
+ @retval EFI_DEVICE_ERROR The dependent serial port reset fails.
+
+**/
+EFI_STATUS
+EFIAPI
+TerminalConInReset (
+ IN EFI_SIMPLE_TEXT_INPUT_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ )
+{
+ EFI_STATUS Status;
+ TERMINAL_DEV *TerminalDevice;
+
+ TerminalDevice = TERMINAL_CON_IN_DEV_FROM_THIS (This);
+
+ //
+ // Report progress code here
+ //
+ REPORT_STATUS_CODE_WITH_DEVICE_PATH (
+ EFI_PROGRESS_CODE,
+ (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_PC_RESET),
+ TerminalDevice->DevicePath
+ );
+
+ Status = TerminalDevice->SerialIo->Reset (TerminalDevice->SerialIo);
+
+ //
+ // Make all the internal buffer empty for keys
+ //
+ TerminalDevice->RawFiFo->Head = TerminalDevice->RawFiFo->Tail;
+ TerminalDevice->UnicodeFiFo->Head = TerminalDevice->UnicodeFiFo->Tail;
+ TerminalDevice->EfiKeyFiFo->Head = TerminalDevice->EfiKeyFiFo->Tail;
+
+ if (EFI_ERROR (Status)) {
+ REPORT_STATUS_CODE_WITH_DEVICE_PATH (
+ EFI_ERROR_CODE | EFI_ERROR_MINOR,
+ (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_CONTROLLER_ERROR),
+ TerminalDevice->DevicePath
+ );
+ }
+
+ return Status;
+}
+
+/**
+ Implements EFI_SIMPLE_TEXT_INPUT_PROTOCOL.ReadKeyStroke().
+
+ @param This Indicates the calling context.
+ @param Key A pointer to a buffer that is filled in with the
+ keystroke information for the key that was sent
+ from terminal.
+
+ @retval EFI_SUCCESS The keystroke information is returned successfully.
+ @retval EFI_NOT_READY There is no keystroke data available.
+ @retval EFI_DEVICE_ERROR The dependent serial device encounters error.
+
+**/
+EFI_STATUS
+EFIAPI
+TerminalConInReadKeyStroke (
+ IN EFI_SIMPLE_TEXT_INPUT_PROTOCOL *This,
+ OUT EFI_INPUT_KEY *Key
+ )
+{
+ TERMINAL_DEV *TerminalDevice;
+ EFI_STATUS Status;
+ EFI_KEY_DATA KeyData;
+
+ //
+ // get TERMINAL_DEV from "This" parameter.
+ //
+ TerminalDevice = TERMINAL_CON_IN_DEV_FROM_THIS (This);
+
+ Status = ReadKeyStrokeWorker (TerminalDevice, &KeyData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ CopyMem (Key, &KeyData.Key, sizeof (EFI_INPUT_KEY));
+
+ return EFI_SUCCESS;
+
+}
+
+/**
+ Check if the key already has been registered.
+
+ If both RegsiteredData and InputData is NULL, then ASSERT().
+
+ @param RegsiteredData A pointer to a buffer that is filled in with the
+ keystroke state data for the key that was
+ registered.
+ @param InputData A pointer to a buffer that is filled in with the
+ keystroke state data for the key that was
+ pressed.
+
+ @retval TRUE Key be pressed matches a registered key.
+ @retval FLASE Match failed.
+
+**/
+BOOLEAN
+IsKeyRegistered (
+ IN EFI_KEY_DATA *RegsiteredData,
+ IN EFI_KEY_DATA *InputData
+ )
+{
+ ASSERT (RegsiteredData != NULL && InputData != NULL);
+
+ if ((RegsiteredData->Key.ScanCode != InputData->Key.ScanCode) ||
+ (RegsiteredData->Key.UnicodeChar != InputData->Key.UnicodeChar)) {
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
+
+
+/**
+ Event notification function for EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.WaitForKeyEx event
+ Signal the event if there is key available
+
+ @param Event Indicates the event that invoke this function.
+ @param Context Indicates the calling context.
+
+**/
+VOID
+EFIAPI
+TerminalConInWaitForKeyEx (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ TerminalConInWaitForKey (Event, Context);
+}
+
+//
+// Simple Text Input Ex protocol functions
+//
+
+/**
+ Reset the input device and optionally run diagnostics
+
+ @param This Protocol instance pointer.
+ @param ExtendedVerification Driver may perform diagnostics on reset.
+
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The device is not functioning properly and could
+ not be reset.
+
+**/
+EFI_STATUS
+EFIAPI
+TerminalConInResetEx (
+ IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ )
+{
+ EFI_STATUS Status;
+ TERMINAL_DEV *TerminalDevice;
+
+ TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
+
+ Status = TerminalDevice->SimpleInput.Reset (&TerminalDevice->SimpleInput, ExtendedVerification);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+
+}
+
+
+/**
+ Reads the next keystroke from the input device. The WaitForKey Event can
+ be used to test for existence of a keystroke via WaitForEvent () call.
+
+ @param This Protocol instance pointer.
+ @param KeyData A pointer to a buffer that is filled in with the
+ keystroke state data for the key that was
+ pressed.
+
+ @retval EFI_SUCCESS The keystroke information was returned.
+ @retval EFI_NOT_READY There was no keystroke data available.
+ @retval EFI_DEVICE_ERROR The keystroke information was not returned due
+ to hardware errors.
+ @retval EFI_INVALID_PARAMETER KeyData is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+TerminalConInReadKeyStrokeEx (
+ IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
+ OUT EFI_KEY_DATA *KeyData
+ )
+{
+ TERMINAL_DEV *TerminalDevice;
+
+ if (KeyData == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
+
+ return ReadKeyStrokeWorker (TerminalDevice, KeyData);
+
+}
+
+
+/**
+ Set certain state for the input device.
+
+ @param This Protocol instance pointer.
+ @param KeyToggleState A pointer to the EFI_KEY_TOGGLE_STATE to set the
+ state for the input device.
+
+ @retval EFI_SUCCESS The device state was set successfully.
+ @retval EFI_DEVICE_ERROR The device is not functioning correctly and
+ could not have the setting adjusted.
+ @retval EFI_UNSUPPORTED The device does not have the ability to set its
+ state.
+ @retval EFI_INVALID_PARAMETER KeyToggleState is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+TerminalConInSetState (
+ IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
+ IN EFI_KEY_TOGGLE_STATE *KeyToggleState
+ )
+{
+ if (KeyToggleState == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Register a notification function for a particular keystroke for the input device.
+
+ @param This Protocol instance pointer.
+ @param KeyData A pointer to a buffer that is filled in with the
+ keystroke information data for the key that was
+ pressed.
+ @param KeyNotificationFunction Points to the function to be called when the key
+ sequence is typed specified by KeyData.
+ @param NotifyHandle Points to the unique handle assigned to the
+ registered notification.
+
+ @retval EFI_SUCCESS The notification function was registered
+ successfully.
+ @retval EFI_OUT_OF_RESOURCES Unable to allocate resources for necessary data
+ structures.
+ @retval EFI_INVALID_PARAMETER KeyData or NotifyHandle is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+TerminalConInRegisterKeyNotify (
+ IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
+ IN EFI_KEY_DATA *KeyData,
+ IN EFI_KEY_NOTIFY_FUNCTION KeyNotificationFunction,
+ OUT EFI_HANDLE *NotifyHandle
+ )
+{
+ TERMINAL_DEV *TerminalDevice;
+ TERMINAL_CONSOLE_IN_EX_NOTIFY *NewNotify;
+ LIST_ENTRY *Link;
+ LIST_ENTRY *NotifyList;
+ TERMINAL_CONSOLE_IN_EX_NOTIFY *CurrentNotify;
+
+ if (KeyData == NULL || NotifyHandle == NULL || KeyNotificationFunction == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
+
+ //
+ // Return EFI_SUCCESS if the (KeyData, NotificationFunction) is already registered.
+ //
+ NotifyList = &TerminalDevice->NotifyList;
+ for (Link = GetFirstNode (NotifyList); !IsNull (NotifyList,Link); Link = GetNextNode (NotifyList,Link)) {
+ CurrentNotify = CR (
+ Link,
+ TERMINAL_CONSOLE_IN_EX_NOTIFY,
+ NotifyEntry,
+ TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE
+ );
+ if (IsKeyRegistered (&CurrentNotify->KeyData, KeyData)) {
+ if (CurrentNotify->KeyNotificationFn == KeyNotificationFunction) {
+ *NotifyHandle = CurrentNotify->NotifyHandle;
+ return EFI_SUCCESS;
+ }
+ }
+ }
+
+ //
+ // Allocate resource to save the notification function
+ //
+ NewNotify = (TERMINAL_CONSOLE_IN_EX_NOTIFY *) AllocateZeroPool (sizeof (TERMINAL_CONSOLE_IN_EX_NOTIFY));
+ if (NewNotify == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ NewNotify->Signature = TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE;
+ NewNotify->KeyNotificationFn = KeyNotificationFunction;
+ NewNotify->NotifyHandle = (EFI_HANDLE) NewNotify;
+ CopyMem (&NewNotify->KeyData, KeyData, sizeof (KeyData));
+ InsertTailList (&TerminalDevice->NotifyList, &NewNotify->NotifyEntry);
+
+ *NotifyHandle = NewNotify->NotifyHandle;
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Remove a registered notification function from a particular keystroke.
+
+ @param This Protocol instance pointer.
+ @param NotificationHandle The handle of the notification function being
+ unregistered.
+
+ @retval EFI_SUCCESS The notification function was unregistered
+ successfully.
+ @retval EFI_INVALID_PARAMETER The NotificationHandle is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+TerminalConInUnregisterKeyNotify (
+ IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
+ IN EFI_HANDLE NotificationHandle
+ )
+{
+ TERMINAL_DEV *TerminalDevice;
+ LIST_ENTRY *Link;
+ TERMINAL_CONSOLE_IN_EX_NOTIFY *CurrentNotify;
+ LIST_ENTRY *NotifyList;
+
+ if (NotificationHandle == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (((TERMINAL_CONSOLE_IN_EX_NOTIFY *) NotificationHandle)->Signature != TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ TerminalDevice = TERMINAL_CON_IN_EX_DEV_FROM_THIS (This);
+
+ NotifyList = &TerminalDevice->NotifyList;
+ for (Link = GetFirstNode (NotifyList); !IsNull (NotifyList,Link); Link = GetNextNode (NotifyList,Link)) {
+ CurrentNotify = CR (
+ Link,
+ TERMINAL_CONSOLE_IN_EX_NOTIFY,
+ NotifyEntry,
+ TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE
+ );
+ if (CurrentNotify->NotifyHandle == NotificationHandle) {
+ //
+ // Remove the notification function from NotifyList and free resources
+ //
+ RemoveEntryList (&CurrentNotify->NotifyEntry);
+
+ gBS->FreePool (CurrentNotify);
+ return EFI_SUCCESS;
+ }
+ }
+
+ //
+ // Can not find the matching entry in database.
+ //
+ return EFI_INVALID_PARAMETER;
+}
+
+/**
+ Translate raw data into Unicode (according to different encode), and
+ translate Unicode into key information. (according to different standard).
+
+ @param TerminalDevice Terminal driver private structure.
+
+**/
+VOID
+TranslateRawDataToEfiKey (
+ IN TERMINAL_DEV *TerminalDevice
+ )
+{
+ switch (TerminalDevice->TerminalType) {
+
+ case PCANSITYPE:
+ case VT100TYPE:
+ case VT100PLUSTYPE:
+ AnsiRawDataToUnicode (TerminalDevice);
+ UnicodeToEfiKey (TerminalDevice);
+ break;
+
+ case VTUTF8TYPE:
+ //
+ // Process all the raw data in the RawFIFO,
+ // put the processed key into UnicodeFIFO.
+ //
+ VTUTF8RawDataToUnicode (TerminalDevice);
+
+ //
+ // Translate all the Unicode data in the UnicodeFIFO to Efi key,
+ // then put into EfiKeyFIFO.
+ //
+ UnicodeToEfiKey (TerminalDevice);
+
+ break;
+ }
+}
+
+/**
+ Event notification function for EFI_SIMPLE_TEXT_INPUT_PROTOCOL.WaitForKey event
+ Signal the event if there is key available
+
+ @param Event Indicates the event that invoke this function.
+ @param Context Indicates the calling context.
+
+**/
+VOID
+EFIAPI
+TerminalConInWaitForKey (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ //
+ // Someone is waiting on the keystroke event, if there's
+ // a key pending, signal the event
+ //
+ if (!IsEfiKeyFiFoEmpty ((TERMINAL_DEV *) Context)) {
+
+ gBS->SignalEvent (Event);
+ }
+}
+
+/**
+ Timer handler to poll the key from serial.
+
+ @param Event Indicates the event that invoke this function.
+ @param Context Indicates the calling context.
+**/
+VOID
+EFIAPI
+TerminalConInTimerHandler (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ TERMINAL_DEV *TerminalDevice;
+ UINT8 Input;
+ EFI_SERIAL_IO_MODE *Mode;
+ EFI_SERIAL_IO_PROTOCOL *SerialIo;
+ UINTN SerialInTimeOut;
+
+ TerminalDevice = (TERMINAL_DEV *) Context;
+
+ SerialIo = TerminalDevice->SerialIo;
+ if (SerialIo == NULL) {
+ return ;
+ }
+ //
+ // if current timeout value for serial device is not identical with
+ // the value saved in TERMINAL_DEV structure, then recalculate the
+ // timeout value again and set serial attribute according to this value.
+ //
+ Mode = SerialIo->Mode;
+ if (Mode->Timeout != TerminalDevice->SerialInTimeOut) {
+
+ SerialInTimeOut = 0;
+ if (Mode->BaudRate != 0) {
+ //
+ // According to BAUD rate to calculate the timeout value.
+ //
+ SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) * 2 * 1000000 / (UINTN) Mode->BaudRate;
+ }
+
+ Status = SerialIo->SetAttributes (
+ SerialIo,
+ Mode->BaudRate,
+ Mode->ReceiveFifoDepth,
+ (UINT32) SerialInTimeOut,
+ (EFI_PARITY_TYPE) (Mode->Parity),
+ (UINT8) Mode->DataBits,
+ (EFI_STOP_BITS_TYPE) (Mode->StopBits)
+ );
+
+ if (EFI_ERROR (Status)) {
+ TerminalDevice->SerialInTimeOut = 0;
+ } else {
+ TerminalDevice->SerialInTimeOut = SerialInTimeOut;
+ }
+ }
+
+ //
+ // Fetch all the keys in the serial buffer,
+ // and insert the byte stream into RawFIFO.
+ //
+ while (!IsRawFiFoFull (TerminalDevice)) {
+
+ Status = GetOneKeyFromSerial (TerminalDevice->SerialIo, &Input);
+
+ if (EFI_ERROR (Status)) {
+ if (Status == EFI_DEVICE_ERROR) {
+ REPORT_STATUS_CODE_WITH_DEVICE_PATH (
+ EFI_ERROR_CODE | EFI_ERROR_MINOR,
+ (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_INPUT_ERROR),
+ TerminalDevice->DevicePath
+ );
+ }
+ break;
+ }
+
+ RawFiFoInsertOneKey (TerminalDevice, Input);
+ }
+
+ //
+ // Translate all the raw data in RawFIFO into EFI Key,
+ // according to different terminal type supported.
+ //
+ TranslateRawDataToEfiKey (TerminalDevice);
+}
+
+/**
+ Get one key out of serial buffer.
+
+ @param SerialIo Serial I/O protocol attached to the serial device.
+ @param Output The fetched key.
+
+ @retval EFI_NOT_READY If serial buffer is empty.
+ @retval EFI_DEVICE_ERROR If reading serial buffer encounter error.
+ @retval EFI_SUCCESS If reading serial buffer successfully, put
+ the fetched key to the parameter output.
+
+**/
+EFI_STATUS
+GetOneKeyFromSerial (
+ EFI_SERIAL_IO_PROTOCOL *SerialIo,
+ UINT8 *Output
+ )
+{
+ EFI_STATUS Status;
+ UINTN Size;
+
+ Size = 1;
+ *Output = 0;
+
+ //
+ // Read one key from serial I/O device.
+ //
+ Status = SerialIo->Read (SerialIo, &Size, Output);
+
+ if (EFI_ERROR (Status)) {
+
+ if (Status == EFI_TIMEOUT) {
+ return EFI_NOT_READY;
+ }
+
+ return EFI_DEVICE_ERROR;
+
+ }
+
+ if (*Output == 0) {
+ return EFI_NOT_READY;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Insert one byte raw data into the Raw Data FIFO.
+
+ @param TerminalDevice Terminal driver private structure.
+ @param Input The key will be input.
+
+ @retval TRUE If insert successfully.
+ @retval FLASE If Raw Data buffer is full before key insertion,
+ and the key is lost.
+
+**/
+BOOLEAN
+RawFiFoInsertOneKey (
+ TERMINAL_DEV *TerminalDevice,
+ UINT8 Input
+ )
+{
+ UINT8 Tail;
+
+ Tail = TerminalDevice->RawFiFo->Tail;
+
+ if (IsRawFiFoFull (TerminalDevice)) {
+ //
+ // Raw FIFO is full
+ //
+ return FALSE;
+ }
+
+ TerminalDevice->RawFiFo->Data[Tail] = Input;
+
+ TerminalDevice->RawFiFo->Tail = (UINT8) ((Tail + 1) % (RAW_FIFO_MAX_NUMBER + 1));
+
+ return TRUE;
+}
+
+/**
+ Remove one pre-fetched key out of the Raw Data FIFO.
+
+ @param TerminalDevice Terminal driver private structure.
+ @param Output The key will be removed.
+
+ @retval TRUE If insert successfully.
+ @retval FLASE If Raw Data FIFO buffer is empty before remove operation.
+
+**/
+BOOLEAN
+RawFiFoRemoveOneKey (
+ TERMINAL_DEV *TerminalDevice,
+ UINT8 *Output
+ )
+{
+ UINT8 Head;
+
+ Head = TerminalDevice->RawFiFo->Head;
+
+ if (IsRawFiFoEmpty (TerminalDevice)) {
+ //
+ // FIFO is empty
+ //
+ *Output = 0;
+ return FALSE;
+ }
+
+ *Output = TerminalDevice->RawFiFo->Data[Head];
+
+ TerminalDevice->RawFiFo->Head = (UINT8) ((Head + 1) % (RAW_FIFO_MAX_NUMBER + 1));
+
+ return TRUE;
+}
+
+/**
+ Clarify whether Raw Data FIFO buffer is empty.
+
+ @param TerminalDevice Terminal driver private structure
+
+ @retval TRUE If Raw Data FIFO buffer is empty.
+ @retval FLASE If Raw Data FIFO buffer is not empty.
+
+**/
+BOOLEAN
+IsRawFiFoEmpty (
+ TERMINAL_DEV *TerminalDevice
+ )
+{
+ if (TerminalDevice->RawFiFo->Head == TerminalDevice->RawFiFo->Tail) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Clarify whether Raw Data FIFO buffer is full.
+
+ @param TerminalDevice Terminal driver private structure
+
+ @retval TRUE If Raw Data FIFO buffer is full.
+ @retval FLASE If Raw Data FIFO buffer is not full.
+
+**/
+BOOLEAN
+IsRawFiFoFull (
+ TERMINAL_DEV *TerminalDevice
+ )
+{
+ UINT8 Tail;
+ UINT8 Head;
+
+ Tail = TerminalDevice->RawFiFo->Tail;
+ Head = TerminalDevice->RawFiFo->Head;
+
+ if (((Tail + 1) % (RAW_FIFO_MAX_NUMBER + 1)) == Head) {
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/**
+ Insert one pre-fetched key into the FIFO buffer.
+
+ @param TerminalDevice Terminal driver private structure.
+ @param Key The key will be input.
+
+ @retval TRUE If insert successfully.
+ @retval FLASE If FIFO buffer is full before key insertion,
+ and the key is lost.
+
+**/
+BOOLEAN
+EfiKeyFiFoInsertOneKey (
+ TERMINAL_DEV *TerminalDevice,
+ EFI_INPUT_KEY *Key
+ )
+{
+ UINT8 Tail;
+ LIST_ENTRY *Link;
+ LIST_ENTRY *NotifyList;
+ TERMINAL_CONSOLE_IN_EX_NOTIFY *CurrentNotify;
+ EFI_KEY_DATA KeyData;
+
+ Tail = TerminalDevice->EfiKeyFiFo->Tail;
+
+ CopyMem (&KeyData.Key, Key, sizeof (EFI_INPUT_KEY));
+ KeyData.KeyState.KeyShiftState = 0;
+ KeyData.KeyState.KeyToggleState = 0;
+
+ //
+ // Invoke notification functions if exist
+ //
+ NotifyList = &TerminalDevice->NotifyList;
+ for (Link = GetFirstNode (NotifyList); !IsNull (NotifyList,Link); Link = GetNextNode (NotifyList,Link)) {
+ CurrentNotify = CR (
+ Link,
+ TERMINAL_CONSOLE_IN_EX_NOTIFY,
+ NotifyEntry,
+ TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE
+ );
+ if (IsKeyRegistered (&CurrentNotify->KeyData, &KeyData)) {
+ CurrentNotify->KeyNotificationFn (&KeyData);
+ }
+ }
+ if (IsEfiKeyFiFoFull (TerminalDevice)) {
+ //
+ // Efi Key FIFO is full
+ //
+ return FALSE;
+ }
+
+ CopyMem (&TerminalDevice->EfiKeyFiFo->Data[Tail], Key, sizeof (EFI_INPUT_KEY));
+
+ TerminalDevice->EfiKeyFiFo->Tail = (UINT8) ((Tail + 1) % (FIFO_MAX_NUMBER + 1));
+
+ return TRUE;
+}
+
+/**
+ Remove one pre-fetched key out of the FIFO buffer.
+
+ @param TerminalDevice Terminal driver private structure.
+ @param Output The key will be removed.
+
+ @retval TRUE If insert successfully.
+ @retval FLASE If FIFO buffer is empty before remove operation.
+
+**/
+BOOLEAN
+EfiKeyFiFoRemoveOneKey (
+ TERMINAL_DEV *TerminalDevice,
+ EFI_INPUT_KEY *Output
+ )
+{
+ UINT8 Head;
+
+ Head = TerminalDevice->EfiKeyFiFo->Head;
+ ASSERT (Head < FIFO_MAX_NUMBER + 1);
+
+ if (IsEfiKeyFiFoEmpty (TerminalDevice)) {
+ //
+ // FIFO is empty
+ //
+ Output->ScanCode = SCAN_NULL;
+ Output->UnicodeChar = 0;
+ return FALSE;
+ }
+
+ *Output = TerminalDevice->EfiKeyFiFo->Data[Head];
+
+ TerminalDevice->EfiKeyFiFo->Head = (UINT8) ((Head + 1) % (FIFO_MAX_NUMBER + 1));
+
+ return TRUE;
+}
+
+/**
+ Clarify whether FIFO buffer is empty.
+
+ @param TerminalDevice Terminal driver private structure
+
+ @retval TRUE If FIFO buffer is empty.
+ @retval FLASE If FIFO buffer is not empty.
+
+**/
+BOOLEAN
+IsEfiKeyFiFoEmpty (
+ TERMINAL_DEV *TerminalDevice
+ )
+{
+ if (TerminalDevice->EfiKeyFiFo->Head == TerminalDevice->EfiKeyFiFo->Tail) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Clarify whether FIFO buffer is full.
+
+ @param TerminalDevice Terminal driver private structure
+
+ @retval TRUE If FIFO buffer is full.
+ @retval FLASE If FIFO buffer is not full.
+
+**/
+BOOLEAN
+IsEfiKeyFiFoFull (
+ TERMINAL_DEV *TerminalDevice
+ )
+{
+ UINT8 Tail;
+ UINT8 Head;
+
+ Tail = TerminalDevice->EfiKeyFiFo->Tail;
+ Head = TerminalDevice->EfiKeyFiFo->Head;
+
+ if (((Tail + 1) % (FIFO_MAX_NUMBER + 1)) == Head) {
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/**
+ Insert one pre-fetched key into the Unicode FIFO buffer.
+
+ @param TerminalDevice Terminal driver private structure.
+ @param Input The key will be input.
+
+ @retval TRUE If insert successfully.
+ @retval FLASE If Unicode FIFO buffer is full before key insertion,
+ and the key is lost.
+
+**/
+BOOLEAN
+UnicodeFiFoInsertOneKey (
+ TERMINAL_DEV *TerminalDevice,
+ UINT16 Input
+ )
+{
+ UINT8 Tail;
+
+ Tail = TerminalDevice->UnicodeFiFo->Tail;
+ ASSERT (Tail < FIFO_MAX_NUMBER + 1);
+
+
+ if (IsUnicodeFiFoFull (TerminalDevice)) {
+ //
+ // Unicode FIFO is full
+ //
+ return FALSE;
+ }
+
+ TerminalDevice->UnicodeFiFo->Data[Tail] = Input;
+
+ TerminalDevice->UnicodeFiFo->Tail = (UINT8) ((Tail + 1) % (FIFO_MAX_NUMBER + 1));
+
+ return TRUE;
+}
+
+/**
+ Remove one pre-fetched key out of the Unicode FIFO buffer.
+
+ @param TerminalDevice Terminal driver private structure.
+ @param Output The key will be removed.
+
+ @retval TRUE If insert successfully.
+ @retval FLASE If Unicode FIFO buffer is empty before remove operation.
+
+**/
+BOOLEAN
+UnicodeFiFoRemoveOneKey (
+ TERMINAL_DEV *TerminalDevice,
+ UINT16 *Output
+ )
+{
+ UINT8 Head;
+
+ Head = TerminalDevice->UnicodeFiFo->Head;
+ ASSERT (Head < FIFO_MAX_NUMBER + 1);
+
+ if (IsUnicodeFiFoEmpty (TerminalDevice)) {
+ //
+ // FIFO is empty
+ //
+ Output = NULL;
+ return FALSE;
+ }
+
+ *Output = TerminalDevice->UnicodeFiFo->Data[Head];
+
+ TerminalDevice->UnicodeFiFo->Head = (UINT8) ((Head + 1) % (FIFO_MAX_NUMBER + 1));
+
+ return TRUE;
+}
+
+/**
+ Clarify whether Unicode FIFO buffer is empty.
+
+ @param TerminalDevice Terminal driver private structure
+
+ @retval TRUE If Unicode FIFO buffer is empty.
+ @retval FLASE If Unicode FIFO buffer is not empty.
+
+**/
+BOOLEAN
+IsUnicodeFiFoEmpty (
+ TERMINAL_DEV *TerminalDevice
+ )
+{
+ if (TerminalDevice->UnicodeFiFo->Head == TerminalDevice->UnicodeFiFo->Tail) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Clarify whether Unicode FIFO buffer is full.
+
+ @param TerminalDevice Terminal driver private structure
+
+ @retval TRUE If Unicode FIFO buffer is full.
+ @retval FLASE If Unicode FIFO buffer is not full.
+
+**/
+BOOLEAN
+IsUnicodeFiFoFull (
+ TERMINAL_DEV *TerminalDevice
+ )
+{
+ UINT8 Tail;
+ UINT8 Head;
+
+ Tail = TerminalDevice->UnicodeFiFo->Tail;
+ Head = TerminalDevice->UnicodeFiFo->Head;
+
+ if (((Tail + 1) % (FIFO_MAX_NUMBER + 1)) == Head) {
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/**
+ Count Unicode FIFO buffer.
+
+ @param TerminalDevice Terminal driver private structure
+
+ @return The count in bytes of Unicode FIFO.
+
+**/
+UINT8
+UnicodeFiFoGetKeyCount (
+ TERMINAL_DEV *TerminalDevice
+ )
+{
+ UINT8 Tail;
+ UINT8 Head;
+
+ Tail = TerminalDevice->UnicodeFiFo->Tail;
+ Head = TerminalDevice->UnicodeFiFo->Head;
+
+ if (Tail >= Head) {
+ return (UINT8) (Tail - Head);
+ } else {
+ return (UINT8) (Tail + FIFO_MAX_NUMBER + 1 - Head);
+ }
+}
+
+/**
+ Update the Unicode characters from a terminal input device into EFI Keys FIFO.
+
+ @param TerminalDevice The terminal device to use to translate raw input into EFI Keys
+
+**/
+VOID
+UnicodeToEfiKeyFlushState (
+ IN TERMINAL_DEV *TerminalDevice
+ )
+{
+ EFI_INPUT_KEY Key;
+ UINT32 InputState;
+
+ InputState = TerminalDevice->InputState;
+
+ if (IsEfiKeyFiFoFull (TerminalDevice)) {
+ return;
+ }
+
+ if ((InputState & INPUT_STATE_ESC) != 0) {
+ Key.ScanCode = SCAN_ESC;
+ Key.UnicodeChar = 0;
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ }
+
+ if ((InputState & INPUT_STATE_CSI) != 0) {
+ Key.ScanCode = SCAN_NULL;
+ Key.UnicodeChar = CSI;
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ }
+
+ if ((InputState & INPUT_STATE_LEFTOPENBRACKET) != 0) {
+ Key.ScanCode = SCAN_NULL;
+ Key.UnicodeChar = LEFTOPENBRACKET;
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ }
+
+ if ((InputState & INPUT_STATE_O) != 0) {
+ Key.ScanCode = SCAN_NULL;
+ Key.UnicodeChar = 'O';
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ }
+
+ if ((InputState & INPUT_STATE_2) != 0) {
+ Key.ScanCode = SCAN_NULL;
+ Key.UnicodeChar = '2';
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ }
+
+ //
+ // Cancel the timer.
+ //
+ gBS->SetTimer (
+ TerminalDevice->TwoSecondTimeOut,
+ TimerCancel,
+ 0
+ );
+
+ TerminalDevice->InputState = INPUT_STATE_DEFAULT;
+}
+
+
+/**
+ Converts a stream of Unicode characters from a terminal input device into EFI Keys that
+ can be read through the Simple Input Protocol.
+
+ The table below shows the keyboard input mappings that this function supports.
+ If the ESC sequence listed in one of the columns is presented, then it is translated
+ into the corresponding EFI Scan Code. If a matching sequence is not found, then the raw
+ key strokes are converted into EFI Keys.
+
+ 2 seconds are allowed for an ESC sequence to be completed. If the ESC sequence is not
+ completed in 2 seconds, then the raw key strokes of the partial ESC sequence are
+ converted into EFI Keys.
+ There is one special input sequence that will force the system to reset.
+ This is ESC R ESC r ESC R.
+
+ Note: current implementation support terminal types include: PC ANSI, VT100+/VTUTF8, VT100.
+ The table below is not same with UEFI Spec 2.3 Appendix B Table 201(not support ANSI X3.64 /
+ DEC VT200-500 and extra support PC ANSI, VT100)since UEFI Table 201 is just an example.
+
+ Symbols used in table below
+ ===========================
+ ESC = 0x1B
+ CSI = 0x9B
+ DEL = 0x7f
+ ^ = CTRL
+
+ +=========+======+===========+==========+==========+
+ | | EFI | UEFI 2.0 | | |
+ | | Scan | | VT100+ | |
+ | KEY | Code | PC ANSI | VTUTF8 | VT100 |
+ +=========+======+===========+==========+==========+
+ | NULL | 0x00 | | | |
+ | UP | 0x01 | ESC [ A | ESC [ A | ESC [ A |
+ | DOWN | 0x02 | ESC [ B | ESC [ B | ESC [ B |
+ | RIGHT | 0x03 | ESC [ C | ESC [ C | ESC [ C |
+ | LEFT | 0x04 | ESC [ D | ESC [ D | ESC [ D |
+ | HOME | 0x05 | ESC [ H | ESC h | ESC [ H |
+ | END | 0x06 | ESC [ F | ESC k | ESC [ K |
+ | INSERT | 0x07 | ESC [ @ | ESC + | ESC [ @ |
+ | | | ESC [ L | | ESC [ L |
+ | DELETE | 0x08 | ESC [ X | ESC - | ESC [ P |
+ | PG UP | 0x09 | ESC [ I | ESC ? | ESC [ V |
+ | | | | | ESC [ ? |
+ | PG DOWN | 0x0A | ESC [ G | ESC / | ESC [ U |
+ | | | | | ESC [ / |
+ | F1 | 0x0B | ESC [ M | ESC 1 | ESC O P |
+ | F2 | 0x0C | ESC [ N | ESC 2 | ESC O Q |
+ | F3 | 0x0D | ESC [ O | ESC 3 | ESC O w |
+ | F4 | 0x0E | ESC [ P | ESC 4 | ESC O x |
+ | F5 | 0x0F | ESC [ Q | ESC 5 | ESC O t |
+ | F6 | 0x10 | ESC [ R | ESC 6 | ESC O u |
+ | F7 | 0x11 | ESC [ S | ESC 7 | ESC O q |
+ | F8 | 0x12 | ESC [ T | ESC 8 | ESC O r |
+ | F9 | 0x13 | ESC [ U | ESC 9 | ESC O p |
+ | F10 | 0x14 | ESC [ V | ESC 0 | ESC O M |
+ | Escape | 0x17 | ESC | ESC | ESC |
+ | F11 | 0x15 | | ESC ! | |
+ | F12 | 0x16 | | ESC @ | |
+ +=========+======+===========+==========+==========+
+
+ Special Mappings
+ ================
+ ESC R ESC r ESC R = Reset System
+
+ @param TerminalDevice The terminal device to use to translate raw input into EFI Keys
+
+**/
+VOID
+UnicodeToEfiKey (
+ IN TERMINAL_DEV *TerminalDevice
+ )
+{
+ EFI_STATUS Status;
+ EFI_STATUS TimerStatus;
+ UINT16 UnicodeChar;
+ EFI_INPUT_KEY Key;
+ BOOLEAN SetDefaultResetState;
+
+ TimerStatus = gBS->CheckEvent (TerminalDevice->TwoSecondTimeOut);
+
+ if (!EFI_ERROR (TimerStatus)) {
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+ }
+
+ while (!IsUnicodeFiFoEmpty (TerminalDevice) && !IsEfiKeyFiFoFull (TerminalDevice)) {
+
+ if (TerminalDevice->InputState != INPUT_STATE_DEFAULT) {
+ //
+ // Check to see if the 2 seconds timer has expired
+ //
+ TimerStatus = gBS->CheckEvent (TerminalDevice->TwoSecondTimeOut);
+ if (!EFI_ERROR (TimerStatus)) {
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+ }
+ }
+
+ //
+ // Fetch one Unicode character from the Unicode FIFO
+ //
+ UnicodeFiFoRemoveOneKey (TerminalDevice, &UnicodeChar);
+
+ SetDefaultResetState = TRUE;
+
+ switch (TerminalDevice->InputState) {
+ case INPUT_STATE_DEFAULT:
+
+ break;
+
+ case INPUT_STATE_ESC:
+
+ if (UnicodeChar == LEFTOPENBRACKET) {
+ TerminalDevice->InputState |= INPUT_STATE_LEFTOPENBRACKET;
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+ continue;
+ }
+
+ if (UnicodeChar == 'O' && TerminalDevice->TerminalType == VT100TYPE) {
+ TerminalDevice->InputState |= INPUT_STATE_O;
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+ continue;
+ }
+
+ Key.ScanCode = SCAN_NULL;
+
+ if (TerminalDevice->TerminalType == VT100PLUSTYPE ||
+ TerminalDevice->TerminalType == VTUTF8TYPE) {
+ switch (UnicodeChar) {
+ case '1':
+ Key.ScanCode = SCAN_F1;
+ break;
+ case '2':
+ Key.ScanCode = SCAN_F2;
+ break;
+ case '3':
+ Key.ScanCode = SCAN_F3;
+ break;
+ case '4':
+ Key.ScanCode = SCAN_F4;
+ break;
+ case '5':
+ Key.ScanCode = SCAN_F5;
+ break;
+ case '6':
+ Key.ScanCode = SCAN_F6;
+ break;
+ case '7':
+ Key.ScanCode = SCAN_F7;
+ break;
+ case '8':
+ Key.ScanCode = SCAN_F8;
+ break;
+ case '9':
+ Key.ScanCode = SCAN_F9;
+ break;
+ case '0':
+ Key.ScanCode = SCAN_F10;
+ break;
+ case '!':
+ Key.ScanCode = SCAN_F11;
+ break;
+ case '@':
+ Key.ScanCode = SCAN_F12;
+ break;
+ case 'h':
+ Key.ScanCode = SCAN_HOME;
+ break;
+ case 'k':
+ Key.ScanCode = SCAN_END;
+ break;
+ case '+':
+ Key.ScanCode = SCAN_INSERT;
+ break;
+ case '-':
+ Key.ScanCode = SCAN_DELETE;
+ break;
+ case '/':
+ Key.ScanCode = SCAN_PAGE_DOWN;
+ break;
+ case '?':
+ Key.ScanCode = SCAN_PAGE_UP;
+ break;
+ default :
+ break;
+ }
+ }
+
+ switch (UnicodeChar) {
+ case 'R':
+ if (TerminalDevice->ResetState == RESET_STATE_DEFAULT) {
+ TerminalDevice->ResetState = RESET_STATE_ESC_R;
+ SetDefaultResetState = FALSE;
+ } else if (TerminalDevice->ResetState == RESET_STATE_ESC_R_ESC_R) {
+ gRT->ResetSystem (EfiResetWarm, EFI_SUCCESS, 0, NULL);
+ }
+ Key.ScanCode = SCAN_NULL;
+ break;
+ case 'r':
+ if (TerminalDevice->ResetState == RESET_STATE_ESC_R) {
+ TerminalDevice->ResetState = RESET_STATE_ESC_R_ESC_R;
+ SetDefaultResetState = FALSE;
+ }
+ Key.ScanCode = SCAN_NULL;
+ break;
+ default :
+ break;
+ }
+
+ if (SetDefaultResetState) {
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+ }
+
+ if (Key.ScanCode != SCAN_NULL) {
+ Key.UnicodeChar = 0;
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ TerminalDevice->InputState = INPUT_STATE_DEFAULT;
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+ continue;
+ }
+
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+
+ break;
+
+ case INPUT_STATE_ESC | INPUT_STATE_O:
+
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+
+ Key.ScanCode = SCAN_NULL;
+
+ if (TerminalDevice->TerminalType == VT100TYPE) {
+ switch (UnicodeChar) {
+ case 'P':
+ Key.ScanCode = SCAN_F1;
+ break;
+ case 'Q':
+ Key.ScanCode = SCAN_F2;
+ break;
+ case 'w':
+ Key.ScanCode = SCAN_F3;
+ break;
+ case 'x':
+ Key.ScanCode = SCAN_F4;
+ break;
+ case 't':
+ Key.ScanCode = SCAN_F5;
+ break;
+ case 'u':
+ Key.ScanCode = SCAN_F6;
+ break;
+ case 'q':
+ Key.ScanCode = SCAN_F7;
+ break;
+ case 'r':
+ Key.ScanCode = SCAN_F8;
+ break;
+ case 'p':
+ Key.ScanCode = SCAN_F9;
+ break;
+ case 'M':
+ Key.ScanCode = SCAN_F10;
+ break;
+ default :
+ break;
+ }
+ }
+
+ if (Key.ScanCode != SCAN_NULL) {
+ Key.UnicodeChar = 0;
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ TerminalDevice->InputState = INPUT_STATE_DEFAULT;
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+ continue;
+ }
+
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+
+ break;
+
+ case INPUT_STATE_ESC | INPUT_STATE_LEFTOPENBRACKET:
+
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+
+ Key.ScanCode = SCAN_NULL;
+
+ if (TerminalDevice->TerminalType == PCANSITYPE ||
+ TerminalDevice->TerminalType == VT100TYPE ||
+ TerminalDevice->TerminalType == VT100PLUSTYPE ||
+ TerminalDevice->TerminalType == VTUTF8TYPE) {
+ switch (UnicodeChar) {
+ case 'A':
+ Key.ScanCode = SCAN_UP;
+ break;
+ case 'B':
+ Key.ScanCode = SCAN_DOWN;
+ break;
+ case 'C':
+ Key.ScanCode = SCAN_RIGHT;
+ break;
+ case 'D':
+ Key.ScanCode = SCAN_LEFT;
+ break;
+ case 'H':
+ if (TerminalDevice->TerminalType == PCANSITYPE ||
+ TerminalDevice->TerminalType == VT100TYPE) {
+ Key.ScanCode = SCAN_HOME;
+ }
+ break;
+ case 'F':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_END;
+ }
+ break;
+ case 'K':
+ if (TerminalDevice->TerminalType == VT100TYPE) {
+ Key.ScanCode = SCAN_END;
+ }
+ break;
+ case 'L':
+ case '@':
+ if (TerminalDevice->TerminalType == PCANSITYPE ||
+ TerminalDevice->TerminalType == VT100TYPE) {
+ Key.ScanCode = SCAN_INSERT;
+ }
+ break;
+ case 'X':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_DELETE;
+ }
+ break;
+ case 'P':
+ if (TerminalDevice->TerminalType == VT100TYPE) {
+ Key.ScanCode = SCAN_DELETE;
+ } else if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F4;
+ }
+ break;
+ case 'I':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_PAGE_UP;
+ }
+ break;
+ case 'V':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F10;
+ }
+ case '?':
+ if (TerminalDevice->TerminalType == VT100TYPE) {
+ Key.ScanCode = SCAN_PAGE_UP;
+ }
+ break;
+ case 'G':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_PAGE_DOWN;
+ }
+ break;
+ case 'U':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F9;
+ }
+ case '/':
+ if (TerminalDevice->TerminalType == VT100TYPE) {
+ Key.ScanCode = SCAN_PAGE_DOWN;
+ }
+ break;
+ case 'M':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F1;
+ }
+ break;
+ case 'N':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F2;
+ }
+ break;
+ case 'O':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F3;
+ }
+ break;
+ case 'Q':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F5;
+ }
+ break;
+ case 'R':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F6;
+ }
+ break;
+ case 'S':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F7;
+ }
+ break;
+ case 'T':
+ if (TerminalDevice->TerminalType == PCANSITYPE) {
+ Key.ScanCode = SCAN_F8;
+ }
+ break;
+ default :
+ break;
+ }
+ }
+
+ if (Key.ScanCode != SCAN_NULL) {
+ Key.UnicodeChar = 0;
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ TerminalDevice->InputState = INPUT_STATE_DEFAULT;
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+ continue;
+ }
+
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+
+ break;
+
+
+ default:
+ //
+ // Invalid state. This should never happen.
+ //
+ ASSERT (FALSE);
+
+ UnicodeToEfiKeyFlushState (TerminalDevice);
+
+ break;
+ }
+
+ if (UnicodeChar == ESC) {
+ TerminalDevice->InputState = INPUT_STATE_ESC;
+ }
+
+ if (UnicodeChar == CSI) {
+ TerminalDevice->InputState = INPUT_STATE_CSI;
+ }
+
+ if (TerminalDevice->InputState != INPUT_STATE_DEFAULT) {
+ Status = gBS->SetTimer(
+ TerminalDevice->TwoSecondTimeOut,
+ TimerRelative,
+ (UINT64)20000000
+ );
+ ASSERT_EFI_ERROR (Status);
+ continue;
+ }
+
+ if (SetDefaultResetState) {
+ TerminalDevice->ResetState = RESET_STATE_DEFAULT;
+ }
+
+ if (UnicodeChar == DEL) {
+ Key.ScanCode = SCAN_DELETE;
+ Key.UnicodeChar = 0;
+ } else {
+ Key.ScanCode = SCAN_NULL;
+ Key.UnicodeChar = UnicodeChar;
+ }
+
+ EfiKeyFiFoInsertOneKey (TerminalDevice, &Key);
+ }
+}
diff --git a/MdeModulePkg/Universal/Console/TerminalDxe/Vtutf8.c b/MdeModulePkg/Universal/Console/TerminalDxe/Vtutf8.c
index 1ad2f9c..586e8ab 100644
--- a/MdeModulePkg/Universal/Console/TerminalDxe/Vtutf8.c
+++ b/MdeModulePkg/Universal/Console/TerminalDxe/Vtutf8.c
@@ -1,328 +1,328 @@
-/** @file
- Implementation of translation upon VT-UTF8.
-
-Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "Terminal.h"
-
-/**
- Translate all VT-UTF8 characters in the Raw FIFI into unicode characters,
- and insert them into Unicode FIFO.
-
- @param TerminalDevice The terminal device.
-
-**/
-VOID
-VTUTF8RawDataToUnicode (
- IN TERMINAL_DEV *TerminalDevice
- )
-{
- UTF8_CHAR Utf8Char;
- UINT8 ValidBytes;
- UINT16 UnicodeChar;
-
- ValidBytes = 0;
- //
- // pop the raw data out from the raw fifo,
- // and translate it into unicode, then push
- // the unicode into unicode fifo, until the raw fifo is empty.
- //
- while (!IsRawFiFoEmpty (TerminalDevice) && !IsUnicodeFiFoFull(TerminalDevice) ) {
-
- GetOneValidUtf8Char (TerminalDevice, &Utf8Char, &ValidBytes);
-
- if (ValidBytes < 1 || ValidBytes > 3) {
- continue;
- }
-
- Utf8ToUnicode (Utf8Char, ValidBytes, (CHAR16 *) &UnicodeChar);
-
- UnicodeFiFoInsertOneKey (TerminalDevice, UnicodeChar);
- }
-}
-
-/**
- Get one valid VT-UTF8 characters set from Raw Data FIFO.
-
- @param Utf8Device The terminal device.
- @param Utf8Char Returned valid VT-UTF8 characters set.
- @param ValidBytes The count of returned VT-VTF8 characters.
- If ValidBytes is zero, no valid VT-UTF8 returned.
-
-**/
-VOID
-GetOneValidUtf8Char (
- IN TERMINAL_DEV *Utf8Device,
- OUT UTF8_CHAR *Utf8Char,
- OUT UINT8 *ValidBytes
- )
-{
- UINT8 Temp;
- UINT8 Index;
- BOOLEAN FetchFlag;
-
- Temp = 0;
- Index = 0;
- FetchFlag = TRUE;
-
- //
- // if no valid Utf8 char is found in the RawFiFo,
- // then *ValidBytes will be zero.
- //
- *ValidBytes = 0;
-
- while (!IsRawFiFoEmpty (Utf8Device)) {
-
- RawFiFoRemoveOneKey (Utf8Device, &Temp);
-
- switch (*ValidBytes) {
-
- case 0:
- if ((Temp & 0x80) == 0) {
- //
- // one-byte utf8 char
- //
- *ValidBytes = 1;
-
- Utf8Char->Utf8_1 = Temp;
-
- FetchFlag = FALSE;
-
- } else if ((Temp & 0xe0) == 0xc0) {
- //
- // two-byte utf8 char
- //
- *ValidBytes = 2;
-
- Utf8Char->Utf8_2[1] = Temp;
-
- } else if ((Temp & 0xf0) == 0xe0) {
- //
- // three-byte utf8 char
- //
- *ValidBytes = 3;
-
- Utf8Char->Utf8_3[2] = Temp;
-
- Index++;
-
- } else {
- //
- // reset *ValidBytes to zero, let valid utf8 char search restart
- //
- *ValidBytes = 0;
- }
-
- break;
-
- case 2:
- //
- // two-byte utf8 char go on
- //
- if ((Temp & 0xc0) == 0x80) {
-
- Utf8Char->Utf8_2[0] = Temp;
-
- FetchFlag = FALSE;
-
- } else {
-
- *ValidBytes = 0;
- }
- break;
-
- case 3:
- //
- // three-byte utf8 char go on
- //
- if ((Temp & 0xc0) == 0x80) {
- if (Index == 1) {
- Utf8Char->Utf8_3[1] = Temp;
- Index++;
- } else {
- Utf8Char->Utf8_3[0] = Temp;
- FetchFlag = FALSE;
- }
- } else {
- //
- // reset *ValidBytes and Index to zero, let valid utf8 char search restart
- //
- *ValidBytes = 0;
- Index = 0;
- }
- break;
-
- default:
- break;
- }
-
- if (!FetchFlag) {
- break;
- }
- }
-
- return ;
-}
-
-/**
- Translate VT-UTF8 characters into one Unicode character.
-
- UTF8 Encoding Table
- Bits per Character | Unicode Character Range | Unicode Binary Encoding | UTF8 Binary Encoding
- 0-7 | 0x0000 - 0x007F | 00000000 0xxxxxxx | 0xxxxxxx
- 8-11 | 0x0080 - 0x07FF | 00000xxx xxxxxxxx | 110xxxxx 10xxxxxx
- 12-16 | 0x0800 - 0xFFFF | xxxxxxxx xxxxxxxx | 1110xxxx 10xxxxxx 10xxxxxx
-
-
- @param Utf8Char VT-UTF8 character set needs translating.
- @param ValidBytes The count of valid VT-UTF8 characters.
- @param UnicodeChar Returned unicode character.
-
-**/
-VOID
-Utf8ToUnicode (
- IN UTF8_CHAR Utf8Char,
- IN UINT8 ValidBytes,
- OUT CHAR16 *UnicodeChar
- )
-{
- UINT8 UnicodeByte0;
- UINT8 UnicodeByte1;
- UINT8 Byte0;
- UINT8 Byte1;
- UINT8 Byte2;
-
- *UnicodeChar = 0;
-
- //
- // translate utf8 code to unicode, in terminal standard,
- // up to 3 bytes utf8 code is supported.
- //
- switch (ValidBytes) {
- case 1:
- //
- // one-byte utf8 code
- //
- *UnicodeChar = (UINT16) Utf8Char.Utf8_1;
- break;
-
- case 2:
- //
- // two-byte utf8 code
- //
- Byte0 = Utf8Char.Utf8_2[0];
- Byte1 = Utf8Char.Utf8_2[1];
-
- UnicodeByte0 = (UINT8) ((Byte1 << 6) | (Byte0 & 0x3f));
- UnicodeByte1 = (UINT8) ((Byte1 >> 2) & 0x07);
- *UnicodeChar = (UINT16) (UnicodeByte0 | (UnicodeByte1 << 8));
- break;
-
- case 3:
- //
- // three-byte utf8 code
- //
- Byte0 = Utf8Char.Utf8_3[0];
- Byte1 = Utf8Char.Utf8_3[1];
- Byte2 = Utf8Char.Utf8_3[2];
-
- UnicodeByte0 = (UINT8) ((Byte1 << 6) | (Byte0 & 0x3f));
- UnicodeByte1 = (UINT8) ((Byte2 << 4) | ((Byte1 >> 2) & 0x0f));
- *UnicodeChar = (UINT16) (UnicodeByte0 | (UnicodeByte1 << 8));
-
- default:
- break;
- }
-
- return ;
-}
-
-/**
- Translate one Unicode character into VT-UTF8 characters.
-
- UTF8 Encoding Table
- Bits per Character | Unicode Character Range | Unicode Binary Encoding | UTF8 Binary Encoding
- 0-7 | 0x0000 - 0x007F | 00000000 0xxxxxxx | 0xxxxxxx
- 8-11 | 0x0080 - 0x07FF | 00000xxx xxxxxxxx | 110xxxxx 10xxxxxx
- 12-16 | 0x0800 - 0xFFFF | xxxxxxxx xxxxxxxx | 1110xxxx 10xxxxxx 10xxxxxx
-
-
- @param Unicode Unicode character need translating.
- @param Utf8Char Return VT-UTF8 character set.
- @param ValidBytes The count of valid VT-UTF8 characters. If
- ValidBytes is zero, no valid VT-UTF8 returned.
-
-**/
-VOID
-UnicodeToUtf8 (
- IN CHAR16 Unicode,
- OUT UTF8_CHAR *Utf8Char,
- OUT UINT8 *ValidBytes
- )
-{
- UINT8 UnicodeByte0;
- UINT8 UnicodeByte1;
- //
- // translate unicode to utf8 code
- //
- UnicodeByte0 = (UINT8) Unicode;
- UnicodeByte1 = (UINT8) (Unicode >> 8);
-
- if (Unicode < 0x0080) {
-
- Utf8Char->Utf8_1 = (UINT8) (UnicodeByte0 & 0x7f);
- *ValidBytes = 1;
-
- } else if (Unicode < 0x0800) {
- //
- // byte sequence: high -> low
- // Utf8_2[0], Utf8_2[1]
- //
- Utf8Char->Utf8_2[1] = (UINT8) ((UnicodeByte0 & 0x3f) + 0x80);
- Utf8Char->Utf8_2[0] = (UINT8) ((((UnicodeByte1 << 2) + (UnicodeByte0 >> 6)) & 0x1f) + 0xc0);
-
- *ValidBytes = 2;
-
- } else {
- //
- // byte sequence: high -> low
- // Utf8_3[0], Utf8_3[1], Utf8_3[2]
- //
- Utf8Char->Utf8_3[2] = (UINT8) ((UnicodeByte0 & 0x3f) + 0x80);
- Utf8Char->Utf8_3[1] = (UINT8) ((((UnicodeByte1 << 2) + (UnicodeByte0 >> 6)) & 0x3f) + 0x80);
- Utf8Char->Utf8_3[0] = (UINT8) (((UnicodeByte1 >> 4) & 0x0f) + 0xe0);
-
- *ValidBytes = 3;
- }
-}
-
-
-/**
- Check if input string is valid VT-UTF8 string.
-
- @param TerminalDevice The terminal device.
- @param WString The input string.
-
- @retval EFI_SUCCESS If all input characters are valid.
-
-**/
-EFI_STATUS
-VTUTF8TestString (
- IN TERMINAL_DEV *TerminalDevice,
- IN CHAR16 *WString
- )
-{
- //
- // to utf8, all kind of characters are supported.
- //
- return EFI_SUCCESS;
-}
+/** @file
+ Implementation of translation upon VT-UTF8.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "Terminal.h"
+
+/**
+ Translate all VT-UTF8 characters in the Raw FIFI into unicode characters,
+ and insert them into Unicode FIFO.
+
+ @param TerminalDevice The terminal device.
+
+**/
+VOID
+VTUTF8RawDataToUnicode (
+ IN TERMINAL_DEV *TerminalDevice
+ )
+{
+ UTF8_CHAR Utf8Char;
+ UINT8 ValidBytes;
+ UINT16 UnicodeChar;
+
+ ValidBytes = 0;
+ //
+ // pop the raw data out from the raw fifo,
+ // and translate it into unicode, then push
+ // the unicode into unicode fifo, until the raw fifo is empty.
+ //
+ while (!IsRawFiFoEmpty (TerminalDevice) && !IsUnicodeFiFoFull (TerminalDevice)) {
+
+ GetOneValidUtf8Char (TerminalDevice, &Utf8Char, &ValidBytes);
+
+ if (ValidBytes < 1 || ValidBytes > 3) {
+ continue;
+ }
+
+ Utf8ToUnicode (Utf8Char, ValidBytes, (CHAR16 *) &UnicodeChar);
+
+ UnicodeFiFoInsertOneKey (TerminalDevice, UnicodeChar);
+ }
+}
+
+/**
+ Get one valid VT-UTF8 characters set from Raw Data FIFO.
+
+ @param Utf8Device The terminal device.
+ @param Utf8Char Returned valid VT-UTF8 characters set.
+ @param ValidBytes The count of returned VT-VTF8 characters.
+ If ValidBytes is zero, no valid VT-UTF8 returned.
+
+**/
+VOID
+GetOneValidUtf8Char (
+ IN TERMINAL_DEV *Utf8Device,
+ OUT UTF8_CHAR *Utf8Char,
+ OUT UINT8 *ValidBytes
+ )
+{
+ UINT8 Temp;
+ UINT8 Index;
+ BOOLEAN FetchFlag;
+
+ Temp = 0;
+ Index = 0;
+ FetchFlag = TRUE;
+
+ //
+ // if no valid Utf8 char is found in the RawFiFo,
+ // then *ValidBytes will be zero.
+ //
+ *ValidBytes = 0;
+
+ while (!IsRawFiFoEmpty (Utf8Device)) {
+
+ RawFiFoRemoveOneKey (Utf8Device, &Temp);
+
+ switch (*ValidBytes) {
+
+ case 0:
+ if ((Temp & 0x80) == 0) {
+ //
+ // one-byte utf8 char
+ //
+ *ValidBytes = 1;
+
+ Utf8Char->Utf8_1 = Temp;
+
+ FetchFlag = FALSE;
+
+ } else if ((Temp & 0xe0) == 0xc0) {
+ //
+ // two-byte utf8 char
+ //
+ *ValidBytes = 2;
+
+ Utf8Char->Utf8_2[1] = Temp;
+
+ } else if ((Temp & 0xf0) == 0xe0) {
+ //
+ // three-byte utf8 char
+ //
+ *ValidBytes = 3;
+
+ Utf8Char->Utf8_3[2] = Temp;
+
+ Index++;
+
+ } else {
+ //
+ // reset *ValidBytes to zero, let valid utf8 char search restart
+ //
+ *ValidBytes = 0;
+ }
+
+ break;
+
+ case 2:
+ //
+ // two-byte utf8 char go on
+ //
+ if ((Temp & 0xc0) == 0x80) {
+
+ Utf8Char->Utf8_2[0] = Temp;
+
+ FetchFlag = FALSE;
+
+ } else {
+
+ *ValidBytes = 0;
+ }
+ break;
+
+ case 3:
+ //
+ // three-byte utf8 char go on
+ //
+ if ((Temp & 0xc0) == 0x80) {
+ if (Index == 1) {
+ Utf8Char->Utf8_3[1] = Temp;
+ Index++;
+ } else {
+ Utf8Char->Utf8_3[0] = Temp;
+ FetchFlag = FALSE;
+ }
+ } else {
+ //
+ // reset *ValidBytes and Index to zero, let valid utf8 char search restart
+ //
+ *ValidBytes = 0;
+ Index = 0;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ if (!FetchFlag) {
+ break;
+ }
+ }
+
+ return ;
+}
+
+/**
+ Translate VT-UTF8 characters into one Unicode character.
+
+ UTF8 Encoding Table
+ Bits per Character | Unicode Character Range | Unicode Binary Encoding | UTF8 Binary Encoding
+ 0-7 | 0x0000 - 0x007F | 00000000 0xxxxxxx | 0xxxxxxx
+ 8-11 | 0x0080 - 0x07FF | 00000xxx xxxxxxxx | 110xxxxx 10xxxxxx
+ 12-16 | 0x0800 - 0xFFFF | xxxxxxxx xxxxxxxx | 1110xxxx 10xxxxxx 10xxxxxx
+
+
+ @param Utf8Char VT-UTF8 character set needs translating.
+ @param ValidBytes The count of valid VT-UTF8 characters.
+ @param UnicodeChar Returned unicode character.
+
+**/
+VOID
+Utf8ToUnicode (
+ IN UTF8_CHAR Utf8Char,
+ IN UINT8 ValidBytes,
+ OUT CHAR16 *UnicodeChar
+ )
+{
+ UINT8 UnicodeByte0;
+ UINT8 UnicodeByte1;
+ UINT8 Byte0;
+ UINT8 Byte1;
+ UINT8 Byte2;
+
+ *UnicodeChar = 0;
+
+ //
+ // translate utf8 code to unicode, in terminal standard,
+ // up to 3 bytes utf8 code is supported.
+ //
+ switch (ValidBytes) {
+ case 1:
+ //
+ // one-byte utf8 code
+ //
+ *UnicodeChar = (UINT16) Utf8Char.Utf8_1;
+ break;
+
+ case 2:
+ //
+ // two-byte utf8 code
+ //
+ Byte0 = Utf8Char.Utf8_2[0];
+ Byte1 = Utf8Char.Utf8_2[1];
+
+ UnicodeByte0 = (UINT8) ((Byte1 << 6) | (Byte0 & 0x3f));
+ UnicodeByte1 = (UINT8) ((Byte1 >> 2) & 0x07);
+ *UnicodeChar = (UINT16) (UnicodeByte0 | (UnicodeByte1 << 8));
+ break;
+
+ case 3:
+ //
+ // three-byte utf8 code
+ //
+ Byte0 = Utf8Char.Utf8_3[0];
+ Byte1 = Utf8Char.Utf8_3[1];
+ Byte2 = Utf8Char.Utf8_3[2];
+
+ UnicodeByte0 = (UINT8) ((Byte1 << 6) | (Byte0 & 0x3f));
+ UnicodeByte1 = (UINT8) ((Byte2 << 4) | ((Byte1 >> 2) & 0x0f));
+ *UnicodeChar = (UINT16) (UnicodeByte0 | (UnicodeByte1 << 8));
+
+ default:
+ break;
+ }
+
+ return ;
+}
+
+/**
+ Translate one Unicode character into VT-UTF8 characters.
+
+ UTF8 Encoding Table
+ Bits per Character | Unicode Character Range | Unicode Binary Encoding | UTF8 Binary Encoding
+ 0-7 | 0x0000 - 0x007F | 00000000 0xxxxxxx | 0xxxxxxx
+ 8-11 | 0x0080 - 0x07FF | 00000xxx xxxxxxxx | 110xxxxx 10xxxxxx
+ 12-16 | 0x0800 - 0xFFFF | xxxxxxxx xxxxxxxx | 1110xxxx 10xxxxxx 10xxxxxx
+
+
+ @param Unicode Unicode character need translating.
+ @param Utf8Char Return VT-UTF8 character set.
+ @param ValidBytes The count of valid VT-UTF8 characters. If
+ ValidBytes is zero, no valid VT-UTF8 returned.
+
+**/
+VOID
+UnicodeToUtf8 (
+ IN CHAR16 Unicode,
+ OUT UTF8_CHAR *Utf8Char,
+ OUT UINT8 *ValidBytes
+ )
+{
+ UINT8 UnicodeByte0;
+ UINT8 UnicodeByte1;
+ //
+ // translate unicode to utf8 code
+ //
+ UnicodeByte0 = (UINT8) Unicode;
+ UnicodeByte1 = (UINT8) (Unicode >> 8);
+
+ if (Unicode < 0x0080) {
+
+ Utf8Char->Utf8_1 = (UINT8) (UnicodeByte0 & 0x7f);
+ *ValidBytes = 1;
+
+ } else if (Unicode < 0x0800) {
+ //
+ // byte sequence: high -> low
+ // Utf8_2[0], Utf8_2[1]
+ //
+ Utf8Char->Utf8_2[1] = (UINT8) ((UnicodeByte0 & 0x3f) + 0x80);
+ Utf8Char->Utf8_2[0] = (UINT8) ((((UnicodeByte1 << 2) + (UnicodeByte0 >> 6)) & 0x1f) + 0xc0);
+
+ *ValidBytes = 2;
+
+ } else {
+ //
+ // byte sequence: high -> low
+ // Utf8_3[0], Utf8_3[1], Utf8_3[2]
+ //
+ Utf8Char->Utf8_3[2] = (UINT8) ((UnicodeByte0 & 0x3f) + 0x80);
+ Utf8Char->Utf8_3[1] = (UINT8) ((((UnicodeByte1 << 2) + (UnicodeByte0 >> 6)) & 0x3f) + 0x80);
+ Utf8Char->Utf8_3[0] = (UINT8) (((UnicodeByte1 >> 4) & 0x0f) + 0xe0);
+
+ *ValidBytes = 3;
+ }
+}
+
+
+/**
+ Check if input string is valid VT-UTF8 string.
+
+ @param TerminalDevice The terminal device.
+ @param WString The input string.
+
+ @retval EFI_SUCCESS If all input characters are valid.
+
+**/
+EFI_STATUS
+VTUTF8TestString (
+ IN TERMINAL_DEV *TerminalDevice,
+ IN CHAR16 *WString
+ )
+{
+ //
+ // to utf8, all kind of characters are supported.
+ //
+ return EFI_SUCCESS;
+}
generated by cgit v1.1 at 2024-11-11 06:02:06 +0000