diff options
author | vanjeff <vanjeff@6f19259b-4bc3-4df7-8a09-765794883524> | 2012-06-11 02:15:11 +0000 |
---|---|---|
committer | vanjeff <vanjeff@6f19259b-4bc3-4df7-8a09-765794883524> | 2012-06-11 02:15:11 +0000 |
commit | 93c0bdec2807cd968a89a0ac01a379a90fa50f93 (patch) | |
tree | 6d5fea7bf8312b2101fe64c295877e20047ed420 /SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c | |
parent | 44538ba5aa759c4039fc6c588d33a7fe03503c3f (diff) | |
download | edk2-93c0bdec2807cd968a89a0ac01a379a90fa50f93.zip edk2-93c0bdec2807cd968a89a0ac01a379a90fa50f93.tar.gz edk2-93c0bdec2807cd968a89a0ac01a379a90fa50f93.tar.bz2 |
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below:
1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old.
New HOST software will implement logic to handle all other revision mismatch cases.
2. Define new debug message packet to print the debug agent trace information by debug port channel.
3. Add check sum mechanism in the communication protocol between TARGET/HOST.
4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command.
5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach.
6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library.
7. Enable CPUID feature.
8. Enable the hardware data breakpoint.
9. add handshake to improve usb debug cable identify stability issue.
10.Refine all the communication protocol packet to improve extensibility and debugging performance.
a. Use 64bit for IO port address.
b. Add additional Width field to READ_MEMORY/WRITE_MEMORY.
c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach.
d. Remove READ_GROUP register.
e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers).
11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag.
12.Fix IO break point does not work issue in PEI phase.
13.Avoid BSP/APs collision when they met break point at the same time.
14.Solve a bug of calculating debug handle in sec phase.
15.Use mailbox content at Dxe phase but not clear it and reinitialize again.
16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c')
-rw-r--r-- | SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c | 312 |
1 files changed, 175 insertions, 137 deletions
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c index 567e06c..aafd52d 100644 --- a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c @@ -99,6 +99,15 @@ typedef struct _USB_DEBUG_PORT_REGISTER { UINT8 Reserved3;
}USB_DEBUG_PORT_REGISTER;
+//
+// The state machine of usb debug port
+//
+#define USBDBG_NO_DEV 0 // No device present at debug port
+#define USBDBG_NO_DBG_CAB 1 // The device attached is not usb debug cable
+#define USBDBG_DBG_CAB 2 // The device attached is usb debug cable
+#define USBDBG_INIT_DONE 4 // The usb debug cable device is initialized
+#define USBDBG_RESET 8 // The system is reset
+
#pragma pack(1)
//
// The internal data structure of DEBUG_PORT_HANDLE, which stores some
@@ -109,7 +118,7 @@ typedef struct _USB_DEBUG_PORT_HANDLE{ // The usb debug port memory BAR number in EHCI configuration space.
//
UINT8 DebugPortBarNumber;
- BOOLEAN Initialized;
+ UINT8 Initialized;
//
// The offset of usb debug port registers in EHCI memory range.
//
@@ -117,11 +126,11 @@ typedef struct _USB_DEBUG_PORT_HANDLE{ //
// The usb debug port memory BAR address.
//
- UINTN UsbDebugPortMemoryBase;
+ UINT32 UsbDebugPortMemoryBase;
//
// The EHCI memory BAR address.
//
- UINTN EhciMemoryBase;
+ UINT32 EhciMemoryBase;
//
// The Bulk In endpoint toggle bit.
//
@@ -289,7 +298,17 @@ UsbDebugPortIn ( //
// Wait for completing the request
//
- while ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & (UINT32)BIT16) == 0);
+ while ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & (UINT32)BIT16) == 0) {
+ if ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE | USB_DEBUG_PORT_ENABLE))
+ != (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE | USB_DEBUG_PORT_ENABLE)) {
+ return RETURN_DEVICE_ERROR;
+ }
+ }
+
+ //
+ // Clearing DONE bit by writing 1
+ //
+ MmioOr32((UINTN)&DebugPortRegister->ControlStatus, BIT16);
//
// Check if the request is executed successfully or not.
@@ -380,7 +399,17 @@ UsbDebugPortOut ( //
// Wait for completing the request
//
- while ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & BIT16) == 0);
+ while ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & BIT16) == 0) {
+ if ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE | USB_DEBUG_PORT_ENABLE))
+ != (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE | USB_DEBUG_PORT_ENABLE)) {
+ return RETURN_DEVICE_ERROR;
+ }
+ }
+
+ //
+ // Clearing DONE bit by writing 1
+ //
+ MmioOr32((UINTN)&DebugPortRegister->ControlStatus, BIT16);
//
// Check if the request is executed successfully or not.
@@ -498,8 +527,8 @@ NeedReinitializeHardware( )
{
UINT16 PciCmd;
- UINTN UsbDebugPortMemoryBase;
- UINTN EhciMemoryBase;
+ UINT32 UsbDebugPortMemoryBase;
+ UINT32 EhciMemoryBase;
BOOLEAN Status;
USB_DEBUG_PORT_REGISTER *UsbDebugPortRegister;
@@ -522,15 +551,23 @@ NeedReinitializeHardware( //
PciCmd = PciRead16 (PcdGet32(PcdUsbEhciPciAddress) + PCI_COMMAND_OFFSET);
if (((PciCmd & EFI_PCI_COMMAND_MEMORY_SPACE) == 0) || ((PciCmd & EFI_PCI_COMMAND_BUS_MASTER) == 0)) {
+ PciCmd |= EFI_PCI_COMMAND_MEMORY_SPACE | EFI_PCI_COMMAND_BUS_MASTER;
+ PciWrite16(PcdGet32(PcdUsbEhciPciAddress) + PCI_COMMAND_OFFSET, PciCmd);
Status = TRUE;
}
//
- // Check if the debug port is enabled and owned by myself.
+ // If the owner and in_use bit is not set, it means system is doing cold/warm boot or EHCI host controller is reset by system software.
//
- UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(Handle->UsbDebugPortMemoryBase + Handle->DebugPortOffset);
- if ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) &
- (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_ENABLE | USB_DEBUG_PORT_IN_USE)) == 0) {
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UINTN)(Handle->UsbDebugPortMemoryBase + Handle->DebugPortOffset);
+ if ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) & (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_ENABLE | USB_DEBUG_PORT_IN_USE))
+ != (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_ENABLE | USB_DEBUG_PORT_IN_USE)) {
+ Status = TRUE;
+ }
+
+ if (Handle->Initialized == USBDBG_RESET) {
+ Status = TRUE;
+ } else if (Handle->Initialized != USBDBG_INIT_DONE) {
Status = TRUE;
}
return Status;
@@ -568,127 +605,145 @@ InitializeUsbDebugHardware ( UINT8 DebugPortNumber;
UINT8 Length;
- UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(Handle->UsbDebugPortMemoryBase + Handle->DebugPortOffset);
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UINTN)(Handle->UsbDebugPortMemoryBase + Handle->DebugPortOffset);
PciCmd = PciRead16 (PcdGet32(PcdUsbEhciPciAddress) + PCI_COMMAND_OFFSET);
- UsbHCSParam = (UINT32 *)(Handle->EhciMemoryBase + 0x04);
- UsbCmd = (UINT32 *)(Handle->EhciMemoryBase + 0x20);
- UsbStatus = (UINT32 *)(Handle->EhciMemoryBase + 0x24);
+ UsbHCSParam = (UINT32 *)(UINTN)(Handle->EhciMemoryBase + 0x04);
+ UsbCmd = (UINT32 *)(UINTN)(Handle->EhciMemoryBase + 0x20);
+ UsbStatus = (UINT32 *)(UINTN)(Handle->EhciMemoryBase + 0x24);
//
- // initialize the data toggle used by bulk in/out endpoint.
+ // Check if the debug port is enabled and owned by myself.
//
- Handle->BulkInToggle = 0;
- Handle->BulkOutToggle = 0;
+ if (((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) & (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE))
+ != (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE)) || (Handle->Initialized == USBDBG_RESET)) {
+ //
+ // If the host controller is not halted, then halt it.
+ //
+ if ((MmioRead32((UINTN)UsbStatus) & BIT12) == 0) {
+ MmioAnd32((UINTN)UsbCmd, (UINT32)~BIT0);
+ while ((MmioRead32((UINTN)UsbStatus) & BIT12) == 0);
+ }
+ //
+ // reset the host controller.
+ //
+ MmioOr32((UINTN)UsbCmd, BIT1);
+ //
+ // ensure that the host controller is reset.
+ //
+ while (MmioRead32((UINTN)UsbCmd) & BIT1);
- //
- // Enable Ehci Memory Space Access
- //
- if (((PciCmd & EFI_PCI_COMMAND_MEMORY_SPACE) == 0) || ((PciCmd & EFI_PCI_COMMAND_BUS_MASTER) == 0)) {
- PciCmd |= EFI_PCI_COMMAND_MEMORY_SPACE | EFI_PCI_COMMAND_BUS_MASTER;
- PciWrite16(PcdGet32(PcdUsbEhciPciAddress) + PCI_COMMAND_OFFSET, PciCmd);
- }
+ //
+ // Start the host controller if it's not running
+ //
+ if (MmioRead32((UINTN)UsbStatus) & BIT12) {
+ MmioOr32((UINTN)UsbCmd, BIT0);
+ // ensure that the host controller is started (HALTED bit must be cleared)
+ while (MmioRead32((UINTN)UsbStatus) & BIT12);
+ }
- //
- // If the host controller is not halted, then halt it.
- //
- if ((MmioRead32((UINTN)UsbStatus) & BIT12) == 0) {
- MmioAnd32((UINTN)UsbCmd, (UINT32)~BIT0);
- while ((MmioRead32((UINTN)UsbStatus) & BIT12) == 0);
- }
- //
- // reset the host controller.
- //
- MmioOr32((UINTN)UsbCmd, BIT1);
- //
- // ensure that the host controller is reset.
- //
- while (MmioRead32((UINTN)UsbCmd) & BIT1);
+ //
+ // First get the ownership of port 0.
+ //
+ MmioOr32((UINTN)&UsbDebugPortRegister->ControlStatus, USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE);
- //
- // Start the host controller if it's not running
- //
- if (MmioRead32((UINTN)UsbStatus) & BIT12) {
- MmioOr32((UINTN)UsbCmd, BIT0);
- // ensure that the host controller is started (HALTED bit must be cleared)
- while (MmioRead32((UINTN)UsbStatus) & BIT12);
+ MicroSecondDelay (200000);
}
-
- //
- // First get the ownership of port 0.
- //
- MmioOr32((UINTN)&UsbDebugPortRegister->ControlStatus, USB_DEBUG_PORT_OWNER);
-
- MicroSecondDelay (200000);
-
//
// Find out which port is used as debug port.
//
DebugPortNumber = (UINT8)((MmioRead32((UINTN)UsbHCSParam) & 0x00F00000) >> 20);
//
- // Should find a non low-speed device is connected
+ // Should find a device is connected at debug port
//
- PortStatus = (UINT32 *)(Handle->EhciMemoryBase + 0x64 + (DebugPortNumber - 1) * 4);
- if (!(MmioRead32((UINTN)PortStatus) & BIT0) || ((MmioRead32((UINTN)PortStatus) & USB_PORT_LINE_STATUS_MASK) == USB_PORT_LINE_STATUS_LS)) {
+ PortStatus = (UINT32 *)(UINTN)(Handle->EhciMemoryBase + 0x64 + (DebugPortNumber - 1) * 4);
+ if (!(MmioRead32((UINTN)PortStatus) & BIT0)) {
+ Handle->Initialized = USBDBG_NO_DEV;
return RETURN_NOT_FOUND;
}
- //
- // Reset the debug port
- //
- MmioOr32((UINTN)PortStatus, BIT8);
- MicroSecondDelay (200000);
- MmioAnd32((UINTN)PortStatus, (UINT32)~BIT8);
- while (MmioRead32((UINTN)PortStatus) & BIT8);
+ if (Handle->Initialized != USBDBG_INIT_DONE) {
+ //
+ // Reset the debug port
+ //
+ MmioOr32((UINTN)PortStatus, BIT8);
+ MicroSecondDelay (500000);
+ MmioAnd32((UINTN)PortStatus, (UINT32)~BIT8);
+ while (MmioRead32((UINTN)PortStatus) & BIT8);
- //
- // The port enabled bit should be set by HW.
- //
- if ((MmioRead32((UINTN)PortStatus) & BIT2) == 0) {
- return RETURN_DEVICE_ERROR;
- }
+ //
+ // The port enabled bit should be set by HW.
+ //
+ if ((MmioRead32((UINTN)PortStatus) & BIT2) == 0) {
+ Handle->Initialized = USBDBG_NO_DBG_CAB;
+ return RETURN_DEVICE_ERROR;
+ }
- //
- // Enable Usb Debug Port Capability
- //
- MmioOr32((UINTN)&UsbDebugPortRegister->ControlStatus, USB_DEBUG_PORT_ENABLE | USB_DEBUG_PORT_IN_USE);
+ //
+ // Enable Usb Debug Port Capability
+ //
+ MmioOr32((UINTN)&UsbDebugPortRegister->ControlStatus, USB_DEBUG_PORT_ENABLE);
- //
- // Start to communicate with Usb Debug Device to see if the attached device is usb debug device or not.
- //
- Length = (UINT8)sizeof (USB_DEBUG_PORT_DESCRIPTOR);
+ //
+ // initialize the data toggle used by bulk in/out endpoint.
+ //
+ Handle->BulkInToggle = 0;
+ Handle->BulkOutToggle = 0;
- //
- // It's not a dedicated usb debug device, should use address 0 to get debug descriptor.
- //
- Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mGetDebugDescriptor, 0x0, 0x0, (UINT8*)&UsbDebugPortDescriptor, &Length);
- if (RETURN_ERROR(Status)) {
//
- // The device is not a usb debug device.
+ // set usb debug device address as 0x7F.
//
- return Status;
- }
+ Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mSetDebugAddress, 0x0, 0x0, NULL, NULL);
+ if (RETURN_ERROR(Status)) {
+ //
+ // The device can not work well.
+ //
+ Handle->Initialized = USBDBG_NO_DBG_CAB;
+ return Status;
+ }
- if (Length != sizeof(USB_DEBUG_PORT_DESCRIPTOR)) {
- return RETURN_DEVICE_ERROR;
- }
+ //
+ // Start to communicate with Usb Debug Device to see if the attached device is usb debug device or not.
+ //
+ Length = (UINT8)sizeof (USB_DEBUG_PORT_DESCRIPTOR);
- //
- // set usb debug device address as 0x7F.
- //
- Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mSetDebugAddress, 0x0, 0x0, NULL, NULL);
- if (RETURN_ERROR(Status)) {
//
- // The device can not work well.
+ // Get debug descriptor.
//
- return Status;
+ Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mGetDebugDescriptor, 0x7F, 0x0, (UINT8*)&UsbDebugPortDescriptor, &Length);
+ if (RETURN_ERROR(Status)) {
+ //
+ // The device is not a usb debug device.
+ //
+ Handle->Initialized = USBDBG_NO_DBG_CAB;
+ return Status;
+ }
+
+ if (Length != sizeof(USB_DEBUG_PORT_DESCRIPTOR)) {
+ Handle->Initialized = USBDBG_NO_DBG_CAB;
+ return RETURN_DEVICE_ERROR;
+ }
+
+ //
+ // enable the usb debug feature.
+ //
+ Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mSetDebugFeature, 0x7F, 0x0, NULL, NULL);
+ if (RETURN_ERROR(Status)) {
+ //
+ // The device can not work well.
+ //
+ Handle->Initialized = USBDBG_NO_DBG_CAB;
+ return Status;
+ }
+
+ Handle->Initialized = USBDBG_DBG_CAB;
}
//
- // enable the usb debug feature.
+ // Set initialized flag
//
- Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mSetDebugFeature, 0x7F, 0x0, NULL, NULL);
+ Handle->Initialized = USBDBG_INIT_DONE;
- return Status;
+ return RETURN_SUCCESS;
}
/**
@@ -744,13 +799,6 @@ DebugPortReadBuffer ( UsbDebugPortHandle = (USB_DEBUG_PORT_HANDLE *)Handle;
}
- //
- // Check if debug port is ready
- //
- if (!UsbDebugPortHandle->Initialized) {
- return 0;
- }
-
if (NeedReinitializeHardware(UsbDebugPortHandle)) {
Status = InitializeUsbDebugHardware (UsbDebugPortHandle);
if (RETURN_ERROR(Status)) {
@@ -758,7 +806,7 @@ DebugPortReadBuffer ( }
}
- UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UINTN)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
//
// First read data from buffer, then read debug port hw to get received data.
@@ -896,13 +944,6 @@ DebugPortWriteBuffer ( UsbDebugPortHandle = (USB_DEBUG_PORT_HANDLE *)Handle;
}
- //
- // Check if debug port is ready
- //
- if (!UsbDebugPortHandle->Initialized) {
- return 0;
- }
-
if (NeedReinitializeHardware(UsbDebugPortHandle)) {
Status = InitializeUsbDebugHardware (UsbDebugPortHandle);
if (RETURN_ERROR(Status)) {
@@ -910,7 +951,7 @@ DebugPortWriteBuffer ( }
}
- UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UINTN)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
while ((Total < NumberOfBytes)) {
if (NumberOfBytes - Total > USB_DEBUG_PORT_MAX_PACKET_SIZE) {
@@ -975,13 +1016,6 @@ DebugPortPollBuffer ( UsbDebugPortHandle = (USB_DEBUG_PORT_HANDLE *)Handle;
}
- //
- // Check if debug port is ready
- //
- if (!UsbDebugPortHandle->Initialized) {
- return 0;
- }
-
if (NeedReinitializeHardware(UsbDebugPortHandle)) {
Status = InitializeUsbDebugHardware(UsbDebugPortHandle);
if (RETURN_ERROR(Status)) {
@@ -997,7 +1031,7 @@ DebugPortPollBuffer ( return TRUE;
}
- UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UINTN)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
UsbDebugPortRegister->TokenPid = INPUT_PID;
if (UsbDebugPortHandle->BulkInToggle == 0) {
@@ -1020,7 +1054,12 @@ DebugPortPollBuffer ( //
// Wait for completing the request
//
- while ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) & (UINT32)BIT16) == 0);
+ while ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) & (UINT32)BIT16) == 0) {
+ if ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) & (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE | USB_DEBUG_PORT_ENABLE))
+ != (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_IN_USE | USB_DEBUG_PORT_ENABLE)) {
+ return FALSE;
+ }
+ }
if ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus)) & BIT6) {
return FALSE;
@@ -1079,8 +1118,7 @@ DebugPortInitialize ( {
RETURN_STATUS Status;
USB_DEBUG_PORT_HANDLE Handle;
-
- if (Function == NULL && Context != NULL) {
+
if (Function == NULL && Context != NULL) {
return (DEBUG_PORT_HANDLE *) Context;
}
@@ -1088,7 +1126,7 @@ DebugPortInitialize ( Status = CalculateUsbDebugPortBar(&Handle.DebugPortOffset, &Handle.DebugPortBarNumber);
if (RETURN_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "USB Debug Port: the pci device pointed by PcdUsbEhciPciAddress is not EHCI host controller or does not support debug port capability!\n"));
+ DEBUG ((EFI_D_ERROR, "UsbDbg: the pci device pointed by PcdUsbEhciPciAddress is not EHCI host controller or does not support debug port capability!\n"));
goto Exit;
}
@@ -1112,16 +1150,16 @@ DebugPortInitialize ( Handle.UsbDebugPortMemoryBase = 0xFFFFFC00 & PciRead32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET + Handle.DebugPortBarNumber * 4);
}
- Status = InitializeUsbDebugHardware (&Handle);
- if (RETURN_ERROR(Status)) {
- DEBUG ((EFI_D_ERROR, "USB Debug Port: Initialization failed, please check if USB debug cable is plugged into EHCI debug port correctly!\n"));
- goto Exit;
- }
+ Handle.Initialized = USBDBG_RESET;
- //
- // Set debug port initialized successfully flag
- //
- Handle.Initialized = TRUE;
+ if (NeedReinitializeHardware(&Handle)) {
+ DEBUG ((EFI_D_ERROR, "UsbDbg: Start EHCI debug port initialization!\n"));
+ Status = InitializeUsbDebugHardware (&Handle);
+ if (RETURN_ERROR(Status)) {
+ DEBUG ((EFI_D_ERROR, "UsbDbg: Initialization failed, please check if USB debug cable is plugged into EHCI debug port correctly!\n"));
+ goto Exit;
+ }
+ }
Exit:
|