Add initial version of Open Virtual Machine Firmware (OVMF) platform.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524

1 files changed, 310 insertions, 0 deletions

diff --git a/OvmfPkg/OvmfPkg.fdf b/OvmfPkg/OvmfPkg.fdf
new file mode 100644
index 0000000..368978e
--- /dev/null
+++ b/OvmfPkg/OvmfPkg.fdf
@@ -0,0 +1,310 @@
+#/** @file

+#  Open Virtual Machine Firmware: FDF

+#

+#  Copyright (c) 2006 - 2009, Intel Corporation

+#

+#  All rights reserved. This program and the accompanying materials

+#  are licensed and made available under the terms and conditions of the BSD License

+#  which accompanies this distribution. The full text of the license may be found at

+#  http://opensource.org/licenses/bsd-license.php

+#

+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+#

+#**/

+

+################################################################################

+#

+# FD Section

+# The [FD] Section is made up of the definition statements and a

+# description of what goes into  the Flash Device Image.  Each FD section

+# defines one flash "device" image.  A flash device image may be one of

+# the following: Removable media bootable image (like a boot floppy

+# image,) an Option ROM image (that would be "flashed" into an add-in

+# card,) a System "Flash"  image (that would be burned into a system's

+# flash) or an Update ("Capsule") image that will be used to update and

+# existing system flash.

+#

+################################################################################

+[FD.OVMF]

+BaseAddress   = 0xFFE00000     # The base address of the FLASH Device.

+Size          = 0x00200000     # The size in bytes of the FLASH Device

+ErasePolarity = 1

+BlockSize     = 0x10000

+NumBlocks     = 0x20

+

+################################################################################

+#

+# Following are lists of FD Region layout which correspond to the locations of different

+# images within the flash device.

+#

+# Regions must be defined in ascending order and may not overlap.

+#

+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by

+# the pipe "|" character, followed by the size of the region, also in hex with the leading

+# "0x" characters. Like:

+# Offset|Size

+# PcdOffsetCName|PcdSizeCName

+# RegionType <FV, DATA, or FILE>

+#

+################################################################################

+0x0|0x200000

+gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize

+FV = MAINFV

+

+################################################################################

+#

+# FV Section

+#

+# [FV] section is used to define what components or modules are placed within a flash

+# device file.  This section also defines order the components and modules are positioned

+# within the image.  The [FV] section consists of define statements, set statements and

+# module statements.

+#

+################################################################################

+[FV.DXEFV]

+BlockSize          = 0x1000

+FvAlignment        = 16         #FV alignment and FV attributes setting.

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+#

+# Files to be placed in DXEFV

+#

+# This firmware volume will have files placed in it uncompressed,

+# and then then entire firmware volume will be compressed in a

+# single compression operation in order to achieve better

+# overall compression.

+#

+

+APRIORI DXE {

+  INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

+  INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf

+}

+

+#

+# DXE Phase modules

+#

+INF  MdeModulePkg/Core/Dxe/DxeMain.inf

+

+INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf

+INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

+

+INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf

+INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf

+INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf

+INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf

+INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf

+INF  UefiCpuPkg/CpuIoDxe/CpuIo.inf

+INF  UefiCpuPkg/CpuDxe/CpuDxe.inf

+INF  PcAtChipsetPkg/8254TimerDxe/8254Timer.inf

+INF  PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf

+INF  IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf

+INF  PcAtChipsetPkg/KbcResetDxe/Reset.inf

+INF  MdeModulePkg/Universal/Metronome/Metronome.inf

+INF  PcAtChipsetPkg/PcRtc/RealTimeClock.inf

+

+INF  MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf

+INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf

+INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf

+INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf

+INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf

+INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf

+INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf

+INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

+INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf

+INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf

+INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf

+INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

+INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

+INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf

+INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf

+INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf

+INF  PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf

+INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf

+INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf

+

+INF  OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf

+

+INF  PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf

+INF  IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf

+INF  IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf

+INF  IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf

+INF  IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf

+

+INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf

+INF  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf

+INF  RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf

+

+INF  FatBinPkg/EnhancedFatDxe/Fat.inf

+

+INF  EdkShellBinPkg/FullShell/FullShell.inf

+

+FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {

+    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress

+      SECTION RAW = MdeModulePkg/Logo/Logo.bmp

+    }

+  }

+

+################################################################################

+

+[FV.MAINFV]

+FvAlignment        = 16

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+#

+# Files to be placed in MAINFV

+#

+# This firmware volume will have all the files placed in it which

+# must not be compressed at the initial boot phase.  The only

+# exception to this is the compressed 'DXEFV'.

+#

+

+APRIORI PEI {

+  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf

+}

+

+#

+#  SEC Phase modules

+#

+INF  OvmfPkg/Sec/SecMain.inf

+

+#

+#  PEI Phase modules

+#

+INF  MdeModulePkg/Core/Pei/PeiMain.inf

+INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf

+INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf

+INF  OvmfPkg/PlatformPei/PlatformPei.inf

+INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

+

+#

+# This file contains the compressed 'DXEFV', which is compressed

+# in a single compression operation in order to achieve better

+# overall compression.

+#

+FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {

+   SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress

+      SECTION FV_IMAGE = DXEFV

+   }

+ }

+

+INF  RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/Bin/ResetVector.inf

+

+################################################################################

+#

+# Rules are use with the [FV] section's module INF type to define

+# how an FFS file is created for a given INF file. The following Rule are the default

+# rules for the different module type. User can add the customized rules to define the

+# content of the FFS file.

+#

+################################################################################

+

+[Rule.Common.PEI_CORE]

+  FILE PEI_CORE = $(NAMED_GUID) {

+    PE32     PE32           |.efi

+    UI       STRING ="$(MODULE_NAME)" Optional

+    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.SEC]

+  FILE SEC = $(NAMED_GUID) {

+    PE32     PE32           |.efi

+    UI       STRING ="$(MODULE_NAME)" Optional

+    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.PEIM]

+  FILE PEIM = $(NAMED_GUID) {

+     PEI_DEPEX PEI_DEPEX Optional        |.depex

+     PE32      PE32                      |.efi

+     UI       STRING="$(MODULE_NAME)" Optional

+     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.PEIM.TIANOCOMPRESSED]

+  FILE PEIM = $(NAMED_GUID) {

+    PEI_DEPEX PEI_DEPEX Optional         |.depex

+    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {

+      PE32      PE32                     |.efi

+      UI        STRING="$(MODULE_NAME)" Optional

+      VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+    }

+  }

+

+[Rule.Common.DXE_CORE]

+  FILE DXE_CORE = $(NAMED_GUID) {

+    PE32     PE32           |.efi

+    UI       STRING="$(MODULE_NAME)" Optional

+    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.UEFI_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX Optional      |.depex

+    PE32     PE32                    |.efi

+    UI       STRING="$(MODULE_NAME)" Optional

+    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.DXE_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX Optional      |.depex

+    PE32     PE32                    |.efi

+    UI       STRING="$(MODULE_NAME)" Optional

+    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.DXE_RUNTIME_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX Optional      |.depex

+    PE32     PE32                    |.efi

+    UI       STRING="$(MODULE_NAME)" Optional

+    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.UEFI_APPLICATION]

+  FILE APPLICATION = $(NAMED_GUID) {

+    PE32     PE32                    |.efi

+    UI       STRING="$(MODULE_NAME)" Optional

+    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.DXE_DRIVER.ACPITABLE]

+  FILE FREEFORM = $(NAMED_GUID) {

+    RAW ACPI               |.acpi

+    RAW ASL                |.aml

+  }

+

+[Rule.Common.SEC.RESET_VECTOR]

+  FILE RAW = $(NAMED_GUID) {

+    RAW RAW                |.raw

+  }

+