MdeModulePkg: Add definitions for EDKII PEI ATA PassThru PPI

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the definitions for EDKII PEI ATA PassThru PPI. This
PPI will provide services that allow ATA commands to be sent to ATA
devices attached to an ATA controller in the PEI phase.

More specifically, the PPI will provide services to:

* Send ATA commands to an ATA device (by service 'PassThru');
* Get the list of the attached ATA device on a controller (by services
  'GetNextPort' and 'GetNextDevice');
* Get the identification information (DevicePath) of the underlying ATA
  host controller (by service 'GetDevicePath').

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>

2 files changed, 222 insertions, 0 deletions

diff --git a/MdeModulePkg/Include/Ppi/AtaPassThru.h b/MdeModulePkg/Include/Ppi/AtaPassThru.h
new file mode 100644
index 0000000..78bdaef
--- /dev/null
+++ b/MdeModulePkg/Include/Ppi/AtaPassThru.h
@@ -0,0 +1,219 @@
+/** @file

+

+  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>

+  This program and the accompanying materials

+  are licensed and made available under the terms and conditions of the BSD License

+  which accompanies this distribution.  The full text of the license may be found at

+  http://opensource.org/licenses/bsd-license.php

+

+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+

+**/

+

+#ifndef _EDKII_ATA_PASS_THRU_PPI_H_

+#define _EDKII_ATA_PASS_THRU_PPI_H_

+

+#include <Protocol/DevicePath.h>

+#include <Protocol/AtaPassThru.h>

+

+///

+/// Global ID for the EDKII_PEI_ATA_PASS_THRU_PPI.

+///

+#define EDKII_PEI_ATA_PASS_THRU_PPI_GUID \

+  { \

+    0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } \

+  }

+

+//

+// Forward declaration for the EDKII_PEI_ATA_PASS_THRU_PPI.

+//

+typedef struct _EDKII_PEI_ATA_PASS_THRU_PPI  EDKII_PEI_ATA_PASS_THRU_PPI;

+

+//

+// Revision The revision to which the ATA Pass Thru PPI interface adheres.

+//          All future revisions must be backwards compatible.

+//          If a future version is not back wards compatible it is not the same GUID.

+//

+#define EDKII_PEI_ATA_PASS_THRU_PPI_REVISION    0x00010000

+

+

+/**

+  Sends an ATA command to an ATA device that is attached to the ATA controller.

+

+  @param[in]     This                  The PPI instance pointer.

+  @param[in]     Port                  The port number of the ATA device to send

+                                       the command.

+  @param[in]     PortMultiplierPort    The port multiplier port number of the ATA

+                                       device to send the command.

+                                       If there is no port multiplier, then specify

+                                       0xFFFF.

+  @param[in,out] Packet                A pointer to the ATA command to send to

+                                       the ATA device specified by Port and

+                                       PortMultiplierPort.

+

+  @retval EFI_SUCCESS              The ATA command was sent by the host. For

+                                   bi-directional commands, InTransferLength bytes

+                                   were transferred from InDataBuffer. For write

+                                   and bi-directional commands, OutTransferLength

+                                   bytes were transferred by OutDataBuffer.

+  @retval EFI_NOT_FOUND            The specified ATA device is not found.

+  @retval EFI_INVALID_PARAMETER    The contents of Acb are invalid. The ATA command

+                                   was not sent, so no additional status information

+                                   is available.

+  @retval EFI_BAD_BUFFER_SIZE      The ATA command was not executed. The number

+                                   of bytes that could be transferred is returned

+                                   in InTransferLength. For write and bi-directional

+                                   commands, OutTransferLength bytes were transferred

+                                   by OutDataBuffer.

+  @retval EFI_NOT_READY            The ATA command could not be sent because there

+                                   are too many ATA commands already queued. The

+                                   caller may retry again later.

+  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to

+                                   send the ATA command.

+

+**/

+typedef

+EFI_STATUS

+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_PASSTHRU) (

+  IN     EDKII_PEI_ATA_PASS_THRU_PPI         *This,

+  IN     UINT16                              Port,

+  IN     UINT16                              PortMultiplierPort,

+  IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET    *Packet

+  );

+

+/**

+  Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.

+  These can either be the list of ports where ATA devices are actually present or the

+  list of legal port numbers for the ATA controller. Regardless, the caller of this

+  function must probe the port number returned to see if an ATA device is actually

+  present at that location on the ATA controller.

+

+  The GetNextPort() function retrieves the port number on an ATA controller. If on

+  input Port is 0xFFFF, then the port number of the first port on the ATA controller

+  is returned in Port and EFI_SUCCESS is returned.

+

+  If Port is a port number that was returned on a previous call to GetNextPort(),

+  then the port number of the next port on the ATA controller is returned in Port,

+  and EFI_SUCCESS is returned. If Port is not 0xFFFF and Port was not returned on

+  a previous call to GetNextPort(), then EFI_INVALID_PARAMETER is returned.

+

+  If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND

+  is returned.

+

+  @param[in]     This    The PPI instance pointer.

+  @param[in,out] Port    On input, a pointer to the port number on the ATA controller.

+                         On output, a pointer to the next port number on the ATA

+                         controller. An input value of 0xFFFF retrieves the first

+                         port number on the ATA controller.

+

+  @retval EFI_SUCCESS              The next port number on the ATA controller was

+                                   returned in Port.

+  @retval EFI_NOT_FOUND            There are no more ports on this ATA controller.

+  @retval EFI_INVALID_PARAMETER    Port is not 0xFFFF and Port was not returned

+                                   on a previous call to GetNextPort().

+

+**/

+typedef

+EFI_STATUS

+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_THRU_GET_NEXT_PORT) (

+  IN     EDKII_PEI_ATA_PASS_THRU_PPI    *This,

+  IN OUT UINT16                         *Port

+  );

+

+/**

+  Used to retrieve the list of legal port multiplier port numbers for ATA devices

+  on a port of an ATA controller. These can either be the list of port multiplier

+  ports where ATA devices are actually present on port or the list of legal port

+  multiplier ports on that port. Regardless, the caller of this function must probe

+  the port number and port multiplier port number returned to see if an ATA device

+  is actually present.

+

+  The GetNextDevice() function retrieves the port multiplier port number of an ATA

+  device present on a port of an ATA controller.

+

+  If PortMultiplierPort points to a port multiplier port number value that was

+  returned on a previous call to GetNextDevice(), then the port multiplier port

+  number of the next ATA device on the port of the ATA controller is returned in

+  PortMultiplierPort, and EFI_SUCCESS is returned.

+

+  If PortMultiplierPort points to 0xFFFF, then the port multiplier port number

+  of the first ATA device on port of the ATA controller is returned in PortMultiplierPort

+  and EFI_SUCCESS is returned.

+

+  If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort

+  was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER

+  is returned.

+

+  If PortMultiplierPort is the port multiplier port number of the last ATA device

+  on the port of the ATA controller, then EFI_NOT_FOUND is returned.

+

+  @param[in]     This                  The PPI instance pointer.

+  @param[in]     Port                  The port number present on the ATA controller.

+  @param[in,out] PortMultiplierPort    On input, a pointer to the port multiplier

+                                       port number of an ATA device present on the

+                                       ATA controller. If on input a PortMultiplierPort

+                                       of 0xFFFF is specified, then the port multiplier

+                                       port number of the first ATA device is returned.

+                                       On output, a pointer to the port multiplier port

+                                       number of the next ATA device present on an ATA

+                                       controller.

+

+  @retval EFI_SUCCESS              The port multiplier port number of the next ATA

+                                   device on the port of the ATA controller was

+                                   returned in PortMultiplierPort.

+  @retval EFI_NOT_FOUND            There are no more ATA devices on this port of

+                                   the ATA controller.

+  @retval EFI_INVALID_PARAMETER    PortMultiplierPort is not 0xFFFF, and PortMultiplierPort

+                                   was not returned on a previous call to GetNextDevice().

+

+**/

+typedef

+EFI_STATUS

+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_GET_NEXT_DEVICE) (

+  IN     EDKII_PEI_ATA_PASS_THRU_PPI    *This,

+  IN     UINT16                         Port,

+  IN OUT UINT16                         *PortMultiplierPort

+  );

+

+/**

+  Gets the device path information of the underlying ATA host controller.

+

+  @param[in]  This                The PPI instance pointer.

+  @param[out] DevicePathLength    The length of the device path in bytes specified

+                                  by DevicePath.

+  @param[out] DevicePath          The device path of the underlying ATA host controller.

+                                  This field re-uses EFI Device Path Protocol as

+                                  defined by Section 10.2 EFI Device Path Protocol

+                                  of UEFI 2.7 Specification.

+

+  @retval EFI_SUCCESS              The device path of the ATA host controller has

+                                   been successfully returned.

+  @retval EFI_INVALID_PARAMETER    DevicePathLength or DevicePath is NULL.

+  @retval EFI_OUT_OF_RESOURCES     Not enough resource to return the device path.

+

+**/

+typedef

+EFI_STATUS

+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_GET_DEVICE_PATH) (

+  IN  EDKII_PEI_ATA_PASS_THRU_PPI    *This,

+  OUT UINTN                          *DevicePathLength,

+  OUT EFI_DEVICE_PATH_PROTOCOL       **DevicePath

+  );

+

+//

+// EDKII_PEI_ATA_PASS_THRU_PPI provides the services that are required to send

+// ATA commands to an ATA device during PEI.

+//

+struct _EDKII_PEI_ATA_PASS_THRU_PPI {

+  UINT64                                        Revision;

+  EFI_ATA_PASS_THRU_MODE                        *Mode;

+  EDKII_PEI_ATA_PASS_THRU_PASSTHRU              PassThru;

+  EDKII_PEI_ATA_PASS_THRU_THRU_GET_NEXT_PORT    GetNextPort;

+  EDKII_PEI_ATA_PASS_THRU_GET_NEXT_DEVICE       GetNextDevice;

+  EDKII_PEI_ATA_PASS_THRU_GET_DEVICE_PATH       GetDevicePath;

+};

+

+extern EFI_GUID gEdkiiPeiAtaPassThruPpiGuid;

+

+#endif

diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 4411185..8efb19e 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -483,6 +483,9 @@
   ## Include/Ppi/AtaAhciController.h

   gEdkiiPeiAtaAhciHostControllerPpiGuid     = { 0x61dd33ea, 0x421f, 0x4cc0, { 0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }

 

+  ## Include/Ppi/AtaPassThru.h

+  gEdkiiPeiAtaPassThruPpiGuid               = { 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9  } }

+

 [Protocols]

   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.

   #  Include/Protocol/LoadPe32Image.h