diff options
author | Jon Hunter <jonathanh@nvidia.com> | 2020-10-29 01:20:08 +0800 |
---|---|---|
committer | mergify[bot] <37929162+mergify[bot]@users.noreply.github.com> | 2020-11-02 01:30:24 +0000 |
commit | 2363c6926098ee5c75c8780d07f88f5c21010683 (patch) | |
tree | 32a79003d0b12217cfb8f02b12172a30c465e412 /MdeModulePkg | |
parent | 8ead7af22bc596de23cdcc46e1f1a8c4e721d6d0 (diff) | |
download | edk2-2363c6926098ee5c75c8780d07f88f5c21010683.zip edk2-2363c6926098ee5c75c8780d07f88f5c21010683.tar.gz edk2-2363c6926098ee5c75c8780d07f88f5c21010683.tar.bz2 |
MdeModulePkg/XhciDxe: Retry device slot init on failure
With some super-speed USB mass storage devices it has been observed
that a USB transaction error may occur when attempting the set the
device address during enumeration.
According the the xHCI specification (section 4.6.5) ...
"A USB Transaction ErrorCompletion Code for an Address Device Command
may be due to a Stall response from a device. Software should issue a
Disable Slot Commandfor the Device Slot then an Enable Slot Command
to recover from this error."
To fix this, retry the device slot initialization if it fails due to a
device error.
Change was verified using a superspeed mass storage device that was
occasionally failing to enumerate in UEFI. With this change this failure
to enumerate was resolved. This failure was also only seen in UEFI and not
in the OS.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Diffstat (limited to 'MdeModulePkg')
-rw-r--r-- | MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 34 | ||||
-rw-r--r-- | MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h | 1 |
2 files changed, 25 insertions, 10 deletions
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c index 00e9cc6..dc36945 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c @@ -1717,9 +1717,11 @@ XhcPollPortStatusChange ( EFI_STATUS Status;
UINT8 Speed;
UINT8 SlotId;
+ UINT8 Retries;
USB_DEV_ROUTE RouteChart;
Status = EFI_SUCCESS;
+ Retries = XHC_INIT_DEVICE_SLOT_RETRIES;
if ((PortState->PortChangeStatus & (USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_OVERCURRENT | USB_PORT_STAT_C_RESET)) == 0) {
return EFI_SUCCESS;
@@ -1761,17 +1763,29 @@ XhcPollPortStatusChange ( } else if ((PortState->PortStatus & USB_PORT_STAT_SUPER_SPEED) != 0) {
Speed = EFI_USB_SPEED_SUPER;
}
- //
- // Execute Enable_Slot cmd for attached device, initialize device context and assign device address.
- //
- SlotId = XhcRouteStringToSlotId (Xhc, RouteChart);
- if ((SlotId == 0) && ((PortState->PortChangeStatus & USB_PORT_STAT_C_RESET) != 0)) {
- if (Xhc->HcCParams.Data.Csz == 0) {
- Status = XhcInitializeDeviceSlot (Xhc, ParentRouteChart, Port, RouteChart, Speed);
- } else {
- Status = XhcInitializeDeviceSlot64 (Xhc, ParentRouteChart, Port, RouteChart, Speed);
+
+ do {
+ //
+ // Execute Enable_Slot cmd for attached device, initialize device context and assign device address.
+ //
+ SlotId = XhcRouteStringToSlotId (Xhc, RouteChart);
+ if ((SlotId == 0) && ((PortState->PortChangeStatus & USB_PORT_STAT_C_RESET) != 0)) {
+ if (Xhc->HcCParams.Data.Csz == 0) {
+ Status = XhcInitializeDeviceSlot (Xhc, ParentRouteChart, Port, RouteChart, Speed);
+ } else {
+ Status = XhcInitializeDeviceSlot64 (Xhc, ParentRouteChart, Port, RouteChart, Speed);
+ }
}
- }
+
+ //
+ // According to the xHCI specification (section 4.6.5), "a USB Transaction
+ // Error Completion Code for an Address Device Command may be due to a Stall
+ // response from a device. Software should issue a Disable Slot Command for
+ // the Device Slot then an Enable Slot Command to recover from this error."
+ // Therefore, retry the device slot initialization if it fails due to a
+ // device error.
+ //
+ } while ((Status == EFI_DEVICE_ERROR) && (Retries-- != 0));
}
return Status;
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h index 2f18995..3f9cdb1 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.h @@ -11,6 +11,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent #define _EFI_XHCI_SCHED_H_
#define XHC_URB_SIG SIGNATURE_32 ('U', 'S', 'B', 'R')
+#define XHC_INIT_DEVICE_SLOT_RETRIES 1
//
// Transfer types, used in URB to identify the transfer type
|