Add SMM Variable implementation.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11151 6f19259b-4bc3-4df7-8a09-765794883524

4 files changed, 153 insertions, 0 deletions

diff --git a/MdeModulePkg/Include/Protocol/SmmFaultTolerantWrite.h b/MdeModulePkg/Include/Protocol/SmmFaultTolerantWrite.h
new file mode 100644
index 0000000..a12e53b
--- /dev/null
+++ b/MdeModulePkg/Include/Protocol/SmmFaultTolerantWrite.h
@@ -0,0 +1,38 @@
+/** @file

+  SMM Fault Tolerant Write protocol is related to EDK II-specific implementation of FTW,

+  provides boot-time service for fault tolerant write capability for block devices in 

+  EFI SMM environment.  The protocol provides for non-volatile storage of the intermediate 

+  data and private information a caller would need to recover from a critical fault, 

+  such as a power failure.   

+

+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>

+This program and the accompanying materials are licensed and made available under 

+the terms and conditions of the BSD License that accompanies this distribution.  

+The full text of the license may be found at

+http://opensource.org/licenses/bsd-license.php.                                            

+

+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 

+

+**/

+

+#ifndef __SMM_FAULT_TOLERANT_WRITE_H__

+#define __SMM_FAULT_TOLERANT_WRITE_H__

+

+#include <Protocol/FaultTolerantWrite.h>

+

+#define EFI_SMM_FAULT_TOLERANT_WRITE_PROTOCOL_GUID \

+  { \

+    0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d } \

+  }

+

+//

+// SMM Fault Tolerant Write protocol structure is the same as Fault Tolerant Write protocol.  

+// The SMM one is intend to run in SMM environment, which means it can be used by 

+// SMM drivers after ExitPmAuth. 

+// 

+typedef EFI_FAULT_TOLERANT_WRITE_PROTOCOL EFI_SMM_FAULT_TOLERANT_WRITE_PROTOCOL;

+

+extern EFI_GUID gEfiSmmFaultTolerantWriteProtocolGuid;

+

+#endif

diff --git a/MdeModulePkg/Include/Protocol/SmmFirmwareVolumeBlock.h b/MdeModulePkg/Include/Protocol/SmmFirmwareVolumeBlock.h
new file mode 100644
index 0000000..b04762b
--- /dev/null
+++ b/MdeModulePkg/Include/Protocol/SmmFirmwareVolumeBlock.h
@@ -0,0 +1,36 @@
+/** @file

+  SMM Firmware Volume Block protocol is related to EDK II-specific implementation of

+  FVB driver, provides control over block-oriented firmware devices and is intended 

+  to use in the EFI SMM environment.

+

+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>

+This program and the accompanying materials are licensed and made available under 

+the terms and conditions of the BSD License that accompanies this distribution.  

+The full text of the license may be found at

+http://opensource.org/licenses/bsd-license.php.                                          

+    

+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

+

+**/

+

+#ifndef __SMM_FIRMWARE_VOLUME_BLOCK_H__

+#define __SMM_FIRMWARE_VOLUME_BLOCK_H__

+

+#include <Protocol/FirmwareVolumeBlock.h>

+

+#define EFI_SMM_FIRMWARE_VOLUME_BLOCK_PROTOCOL_GUID \

+  { \

+    0xf52fc9ff, 0x8025, 0x4432, { 0xa5, 0x3b, 0xb4, 0x7b, 0x5e, 0x9, 0xdb, 0xf9 } \

+  }

+

+//

+// SMM Firmware Volume Block protocol structure is the same as Firmware Volume Block 

+// protocol. The SMM one is intend to run in SMM environment, which means it can be  

+// used by SMM drivers after ExitPmAuth. 

+// 

+typedef EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL EFI_SMM_FIRMWARE_VOLUME_BLOCK_PROTOCOL;

+

+extern EFI_GUID gEfiSmmFirmwareVolumeBlockProtocolGuid;

+

+#endif

diff --git a/MdeModulePkg/Include/Protocol/SmmSwapAddressRange.h b/MdeModulePkg/Include/Protocol/SmmSwapAddressRange.h
new file mode 100644
index 0000000..60a0a2c
--- /dev/null
+++ b/MdeModulePkg/Include/Protocol/SmmSwapAddressRange.h
@@ -0,0 +1,40 @@
+/** @file

+  The EFI_SMM_SWAP_ADDRESS_RANGE_PROTOCOL is related to EDK II-specific implementation 

+  and used to abstract the swap operation of boot block and backup block of FV in EFI 

+  SMM environment. This swap is especially needed when updating the boot block of FV. 

+  If a power failure happens during the boot block update, the swapped backup block 

+  (now the boot block) can boot the machine with the old boot block backed up in it. 

+  The swap operation is platform dependent, so other protocols such as SMM FTW (Fault 

+  Tolerant Write) should use this protocol instead of handling hardware directly.

+

+Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>

+This program and the accompanying materials are licensed and made available under 

+the terms and conditions of the BSD License that accompanies this distribution.  

+The full text of the license may be found at

+http://opensource.org/licenses/bsd-license.php.                                            

+

+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 

+

+**/

+

+#ifndef __SMM_SWAP_ADDRESS_RANGE_H__

+#define __SMM_SWAP_ADDRESS_RANGE_H__

+

+#include <Protocol/SwapAddressRange.h>

+

+#define EFI_SMM_SWAP_ADDRESS_RANGE_PROTOCOL_GUID \

+  { \

+    0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 } \

+  }

+

+//

+// SMM Swap Address Range protocol structure is the same as Swap Address Range protocol.  

+// The SMM one is intend to run in SMM environment, which means it can be used by 

+// SMM drivers after ExitPmAuth. 

+// 

+typedef EFI_SWAP_ADDRESS_RANGE_PROTOCOL EFI_SMM_SWAP_ADDRESS_RANGE_PROTOCOL;

+

+extern EFI_GUID gEfiSmmSwapAddressRangeProtocolGuid;

+

+#endif

diff --git a/MdeModulePkg/Include/Protocol/SmmVariable.h b/MdeModulePkg/Include/Protocol/SmmVariable.h
new file mode 100644
index 0000000..75ab6c3
--- /dev/null
+++ b/MdeModulePkg/Include/Protocol/SmmVariable.h
@@ -0,0 +1,39 @@
+/** @file

+  EFI SMM Variable Protocol is related to EDK II-specific implementation of variables

+  and intended for use as a means to store data in the EFI SMM environment.

+

+  Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>

+  This program and the accompanying materials                          

+  are licensed and made available under the terms and conditions of the BSD License         

+  which accompanies this distribution.  The full text of the license may be found at        

+  http://opensource.org/licenses/bsd-license.php                                            

+

+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     

+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

+

+**/

+

+#ifndef __SMM_VARIABLE_H__

+#define __SMM_VARIABLE_H__

+

+#define EFI_SMM_VARIABLE_PROTOCOL_GUID \

+  { \

+    0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 } \

+  }

+

+typedef struct _EFI_SMM_VARIABLE_PROTOCOL  EFI_SMM_VARIABLE_PROTOCOL;

+

+///

+/// EFI SMM Variable Protocol is intended for use as a means 

+/// to store data in the EFI SMM environment.

+///

+struct _EFI_SMM_VARIABLE_PROTOCOL {

+  EFI_GET_VARIABLE            SmmGetVariable;

+  EFI_GET_NEXT_VARIABLE_NAME  SmmGetNextVariableName;

+  EFI_SET_VARIABLE            SmmSetVariable;

+  EFI_QUERY_VARIABLE_INFO     SmmQueryVariableInfo;

+};

+

+extern EFI_GUID gEfiSmmVariableProtocolGuid;

+

+#endif