diff options
author | Tian, Hot <hot.tian@intel.com> | 2014-01-22 08:38:50 +0000 |
---|---|---|
committer | hhtian <hhtian@6f19259b-4bc3-4df7-8a09-765794883524> | 2014-01-22 08:38:50 +0000 |
commit | 4b738c76f56f8eda171f14b8f9b20e34b66be476 (patch) | |
tree | 353ba43c75023a7d0a88c59389e4bb2ba7c94f0c /MdeModulePkg/Bus | |
parent | 4c8f6044a2ae275071ab6cd6557b584784c093ce (diff) | |
download | edk2-4b738c76f56f8eda171f14b8f9b20e34b66be476.zip edk2-4b738c76f56f8eda171f14b8f9b20e34b66be476.tar.gz edk2-4b738c76f56f8eda171f14b8f9b20e34b66be476.tar.bz2 |
Fix CRLF format
Signed-off-by: Tian, Hot <hot.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15155 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'MdeModulePkg/Bus')
-rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h | 2598 | ||||
-rw-r--r-- | MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.c | 324 | ||||
-rw-r--r-- | MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.h | 258 | ||||
-rw-r--r-- | MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 4410 |
4 files changed, 3795 insertions, 3795 deletions
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h index 1d50c30..0d93e54 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h @@ -1,1299 +1,1299 @@ -/** @file - Header file for ATA/ATAPI PASS THRU driver. - - Copyright (c) 2010 - 2012, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ -#ifndef __ATA_ATAPI_PASS_THRU_H__ -#define __ATA_ATAPI_PASS_THRU_H__ - -#include <Uefi.h> - -#include <IndustryStandard/Pci.h> -#include <IndustryStandard/Atapi.h> -#include <IndustryStandard/Scsi.h> - -#include <Protocol/PciIo.h> -#include <Protocol/IdeControllerInit.h> -#include <Protocol/AtaPassThru.h> -#include <Protocol/ScsiPassThruExt.h> - -#include <Library/DebugLib.h> -#include <Library/BaseLib.h> -#include <Library/BaseMemoryLib.h> -#include <Library/UefiDriverEntryPoint.h> -#include <Library/UefiBootServicesTableLib.h> -#include <Library/UefiLib.h> -#include <Library/PciLib.h> -#include <Library/PcdLib.h> -#include <Library/TimerLib.h> -#include <Library/MemoryAllocationLib.h> -#include <Library/ReportStatusCodeLib.h> -#include <Library/DevicePathLib.h> - -#include "IdeMode.h" -#include "AhciMode.h" - -extern EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding; -extern EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName; -extern EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2; - -#define ATA_ATAPI_PASS_THRU_SIGNATURE SIGNATURE_32 ('a', 'a', 'p', 't') -#define ATA_ATAPI_DEVICE_SIGNATURE SIGNATURE_32 ('a', 'd', 'e', 'v') -#define ATA_NONBLOCKING_TASK_SIGNATURE SIGNATURE_32 ('a', 't', 's', 'k') - -typedef struct _ATA_NONBLOCK_TASK ATA_NONBLOCK_TASK; - -typedef enum { - EfiAtaIdeMode, - EfiAtaAhciMode, - EfiAtaRaidMode, - EfiAtaUnknownMode -} EFI_ATA_HC_WORK_MODE; - -typedef enum { - EfiIdeCdrom, /* ATAPI CDROM */ - EfiIdeHarddisk, /* Hard Disk */ - EfiPortMultiplier, /* Port Multiplier */ - EfiIdeUnknown -} EFI_ATA_DEVICE_TYPE; - -// -// Ahci mode device info -// -typedef struct { - UINT32 Signature; - LIST_ENTRY Link; - - UINT16 Port; - UINT16 PortMultiplier; - EFI_ATA_DEVICE_TYPE Type; - - EFI_IDENTIFY_DATA *IdentifyData; -} EFI_ATA_DEVICE_INFO; - -typedef struct { - UINT32 Signature; - - EFI_HANDLE ControllerHandle; - EFI_PCI_IO_PROTOCOL *PciIo; - EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit; - - EFI_ATA_PASS_THRU_MODE AtaPassThruMode; - EFI_ATA_PASS_THRU_PROTOCOL AtaPassThru; - EFI_EXT_SCSI_PASS_THRU_MODE ExtScsiPassThruMode; - EFI_EXT_SCSI_PASS_THRU_PROTOCOL ExtScsiPassThru; - - EFI_ATA_HC_WORK_MODE Mode; - - EFI_IDE_REGISTERS IdeRegisters[EfiIdeMaxChannel]; - EFI_AHCI_REGISTERS AhciRegisters; - - // - // The attached device list - // - LIST_ENTRY DeviceList; - UINT64 OriginalPciAttributes; - - // - // For AtaPassThru protocol, using the following bytes to record the previous call in - // GetNextPort()/GetNextDevice(). - // - UINT16 PreviousPort; - UINT16 PreviousPortMultiplier; - // - // For ExtScsiPassThru protocol, using the following bytes to record the previous call in - // GetNextTarget()/GetNextTargetLun(). - // - UINT16 PreviousTargetId; - UINT64 PreviousLun; - - // - // For Non-blocking. - // - EFI_EVENT TimerEvent; - LIST_ENTRY NonBlockingTaskList; -} ATA_ATAPI_PASS_THRU_INSTANCE; - -// -// Task for Non-blocking mode. -// -struct _ATA_NONBLOCK_TASK { - UINT32 Signature; - LIST_ENTRY Link; - - UINT16 Port; - UINT16 PortMultiplier; - EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet; - BOOLEAN IsStart; - EFI_EVENT Event; - UINT64 RetryTimes; - VOID *Map; // Pointer to map. - VOID *TableMap;// Pointer to PRD table map. - EFI_ATA_DMA_PRD *MapBaseAddress; // Pointer to range Base address for Map. - UINTN PageCount; // The page numbers used by PCIO freebuffer. -}; - -// -// Timeout value which uses 100ns as a unit. -// It means 3 second span. -// -#define ATA_ATAPI_TIMEOUT EFI_TIMER_PERIOD_SECONDS(3) - -#define IS_ALIGNED(addr, size) (((UINTN) (addr) & (size - 1)) == 0) - -#define ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \ - CR (a, \ - ATA_ATAPI_PASS_THRU_INSTANCE, \ - AtaPassThru, \ - ATA_ATAPI_PASS_THRU_SIGNATURE \ - ) - -#define EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \ - CR (a, \ - ATA_ATAPI_PASS_THRU_INSTANCE, \ - ExtScsiPassThru, \ - ATA_ATAPI_PASS_THRU_SIGNATURE \ - ) - -#define ATA_ATAPI_DEVICE_INFO_FROM_THIS(a) \ - CR (a, \ - EFI_ATA_DEVICE_INFO, \ - Link, \ - ATA_ATAPI_DEVICE_SIGNATURE \ - ); - -#define ATA_NON_BLOCK_TASK_FROM_ENTRY(a) \ - CR (a, \ - ATA_NONBLOCK_TASK, \ - Link, \ - ATA_NONBLOCKING_TASK_SIGNATURE \ - ); - -/** - Retrieves a Unicode string that is the user readable name of the driver. - - This function retrieves the user readable name of a driver in the form of a - Unicode string. If the driver specified by This has a user readable name in - the language specified by Language, then a pointer to the driver name is - returned in DriverName, and EFI_SUCCESS is returned. If the driver specified - by This does not support the language specified by Language, - then EFI_UNSUPPORTED is returned. - - @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or - EFI_COMPONENT_NAME_PROTOCOL instance. - - @param Language[in] A pointer to a Null-terminated ASCII string - array indicating the language. This is the - language of the driver name that the caller is - requesting, and it must match one of the - languages specified in SupportedLanguages. The - number of languages supported by a driver is up - to the driver writer. Language is specified - in RFC 4646 or ISO 639-2 language code format. - - @param DriverName[out] A pointer to the Unicode string to return. - This Unicode string is the name of the - driver specified by This in the language - specified by Language. - - @retval EFI_SUCCESS The Unicode string for the Driver specified by - This and the language specified by Language was - returned in DriverName. - - @retval EFI_INVALID_PARAMETER Language is NULL. - - @retval EFI_INVALID_PARAMETER DriverName is NULL. - - @retval EFI_UNSUPPORTED The driver specified by This does not support - the language specified by Language. - -**/ -EFI_STATUS -EFIAPI -AtaAtapiPassThruComponentNameGetDriverName ( - IN EFI_COMPONENT_NAME_PROTOCOL *This, - IN CHAR8 *Language, - OUT CHAR16 **DriverName - ); - -/** - Retrieves a Unicode string that is the user readable name of the controller - that is being managed by a driver. - - This function retrieves the user readable name of the controller specified by - ControllerHandle and ChildHandle in the form of a Unicode string. If the - driver specified by This has a user readable name in the language specified by - Language, then a pointer to the controller name is returned in ControllerName, - and EFI_SUCCESS is returned. If the driver specified by This is not currently - managing the controller specified by ControllerHandle and ChildHandle, - then EFI_UNSUPPORTED is returned. If the driver specified by This does not - support the language specified by Language, then EFI_UNSUPPORTED is returned. - - @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or - EFI_COMPONENT_NAME_PROTOCOL instance. - - @param ControllerHandle[in] The handle of a controller that the driver - specified by This is managing. This handle - specifies the controller whose name is to be - returned. - - @param ChildHandle[in] The handle of the child controller to retrieve - the name of. This is an optional parameter that - may be NULL. It will be NULL for device - drivers. It will also be NULL for a bus drivers - that wish to retrieve the name of the bus - controller. It will not be NULL for a bus - driver that wishes to retrieve the name of a - child controller. - - @param Language[in] A pointer to a Null-terminated ASCII string - array indicating the language. This is the - language of the driver name that the caller is - requesting, and it must match one of the - languages specified in SupportedLanguages. The - number of languages supported by a driver is up - to the driver writer. Language is specified in - RFC 4646 or ISO 639-2 language code format. - - @param ControllerName[out] A pointer to the Unicode string to return. - This Unicode string is the name of the - controller specified by ControllerHandle and - ChildHandle in the language specified by - Language from the point of view of the driver - specified by This. - - @retval EFI_SUCCESS The Unicode string for the user readable name in - the language specified by Language for the - driver specified by This was returned in - DriverName. - - @retval EFI_INVALID_PARAMETER ControllerHandle is NULL. - - @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid - EFI_HANDLE. - - @retval EFI_INVALID_PARAMETER Language is NULL. - - @retval EFI_INVALID_PARAMETER ControllerName is NULL. - - @retval EFI_UNSUPPORTED The driver specified by This is not currently - managing the controller specified by - ControllerHandle and ChildHandle. - - @retval EFI_UNSUPPORTED The driver specified by This does not support - the language specified by Language. - -**/ -EFI_STATUS -EFIAPI -AtaAtapiPassThruComponentNameGetControllerName ( - IN EFI_COMPONENT_NAME_PROTOCOL *This, - IN EFI_HANDLE ControllerHandle, - IN EFI_HANDLE ChildHandle OPTIONAL, - IN CHAR8 *Language, - OUT CHAR16 **ControllerName - ); - -/** - Tests to see if this driver supports a given controller. If a child device is provided, - it further tests to see if this driver supports creating a handle for the specified child device. - - This function checks to see if the driver specified by This supports the device specified by - ControllerHandle. Drivers will typically use the device path attached to - ControllerHandle and/or the services from the bus I/O abstraction attached to - ControllerHandle to determine if the driver supports ControllerHandle. This function - may be called many times during platform initialization. In order to reduce boot times, the tests - performed by this function must be very small, and take as little time as possible to execute. This - function must not change the state of any hardware devices, and this function must be aware that the - device specified by ControllerHandle may already be managed by the same driver or a - different driver. This function must match its calls to AllocatePages() with FreePages(), - AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). - Because ControllerHandle may have been previously started by the same driver, if a protocol is - already in the opened state, then it must not be closed with CloseProtocol(). This is required - to guarantee the state of ControllerHandle is not modified by this function. - - @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. - @param[in] ControllerHandle The handle of the controller to test. This handle - must support a protocol interface that supplies - an I/O abstraction to the driver. - @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This - parameter is ignored by device drivers, and is optional for bus - drivers. For bus drivers, if this parameter is not NULL, then - the bus driver must determine if the bus controller specified - by ControllerHandle and the child controller specified - by RemainingDevicePath are both supported by this - bus driver. - - @retval EFI_SUCCESS The device specified by ControllerHandle and - RemainingDevicePath is supported by the driver specified by This. - @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and - RemainingDevicePath is already being managed by the driver - specified by This. - @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and - RemainingDevicePath is already being managed by a different - driver or an application that requires exclusive access. - Currently not implemented. - @retval EFI_UNSUPPORTED The device specified by ControllerHandle and - RemainingDevicePath is not supported by the driver specified by This. -**/ -EFI_STATUS -EFIAPI -AtaAtapiPassThruSupported ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath - ); - -/** - Starts a device controller or a bus controller. - - The Start() function is designed to be invoked from the EFI boot service ConnectController(). - As a result, much of the error checking on the parameters to Start() has been moved into this - common boot service. It is legal to call Start() from other locations, - but the following calling restrictions must be followed, or the system behavior will not be deterministic. - 1. ControllerHandle must be a valid EFI_HANDLE. - 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned - EFI_DEVICE_PATH_PROTOCOL. - 3. Prior to calling Start(), the Supported() function for the driver specified by This must - have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. - - @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. - @param[in] ControllerHandle The handle of the controller to start. This handle - must support a protocol interface that supplies - an I/O abstraction to the driver. - @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This - parameter is ignored by device drivers, and is optional for bus - drivers. For a bus driver, if this parameter is NULL, then handles - for all the children of Controller are created by this driver. - If this parameter is not NULL and the first Device Path Node is - not the End of Device Path Node, then only the handle for the - child device specified by the first Device Path Node of - RemainingDevicePath is created by this driver. - If the first Device Path Node of RemainingDevicePath is - the End of Device Path Node, no child handle is created by this - driver. - - @retval EFI_SUCCESS The device was started. - @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - @retval Others The driver failded to start the device. - -**/ -EFI_STATUS -EFIAPI -AtaAtapiPassThruStart ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath - ); - -/** - Stops a device controller or a bus controller. - - The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). - As a result, much of the error checking on the parameters to Stop() has been moved - into this common boot service. It is legal to call Stop() from other locations, - but the following calling restrictions must be followed, or the system behavior will not be deterministic. - 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this - same driver's Start() function. - 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid - EFI_HANDLE. In addition, all of these handles must have been created in this driver's - Start() function, and the Start() function must have called OpenProtocol() on - ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. - - @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. - @param[in] ControllerHandle A handle to the device being stopped. The handle must - support a bus specific I/O protocol for the driver - to use to stop the device. - @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. - @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL - if NumberOfChildren is 0. - - @retval EFI_SUCCESS The device was stopped. - @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. - -**/ -EFI_STATUS -EFIAPI -AtaAtapiPassThruStop ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN UINTN NumberOfChildren, - IN EFI_HANDLE *ChildHandleBuffer - ); - -/** - Traverse the attached ATA devices list to find out the device to access. - - @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. - @param[in] Port The port number of the ATA device to send the command. - @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. - If there is no port multiplier, then specify 0. - @param[in] DeviceType The device type of the ATA device. - - @retval The pointer to the data structure of the device info to access. - -**/ -LIST_ENTRY * -EFIAPI -SearchDeviceInfoList ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, - IN UINT16 Port, - IN UINT16 PortMultiplier, - IN EFI_ATA_DEVICE_TYPE DeviceType - ); - -/** - Allocate device info data structure to contain device info. - And insert the data structure to the tail of device list for tracing. - - @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. - @param[in] Port The port number of the ATA device to send the command. - @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. - If there is no port multiplier, then specify 0. - @param[in] DeviceType The device type of the ATA device. - @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd. - - @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list. - @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use. - -**/ -EFI_STATUS -EFIAPI -CreateNewDeviceInfo ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, - IN UINT16 Port, - IN UINT16 PortMultiplier, - IN EFI_ATA_DEVICE_TYPE DeviceType, - IN EFI_IDENTIFY_DATA *IdentifyData - ); - -/** - Destroy all attached ATA devices info. - - @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. - -**/ -VOID -EFIAPI -DestroyDeviceInfoList ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance - ); - -/** - Destroy all pending non blocking tasks. - - @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. - @param[in] IsSigEvent Indicate whether signal the task event when remove the - task. - -**/ -VOID -EFIAPI -DestroyAsynTaskList ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, - IN BOOLEAN IsSigEvent - ); - -/** - Enumerate all attached ATA devices at IDE mode or AHCI mode separately. - - The function is designed to enumerate all attached ATA devices. - - @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. - - @retval EFI_SUCCESS Successfully enumerate attached ATA devices. - @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. - -**/ -EFI_STATUS -EFIAPI -EnumerateAttachedDevice ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance - ); - -/** - Call back funtion when the timer event is signaled. - - @param[in] Event The Event this notify function registered to. - @param[in] Context Pointer to the context data registered to the - Event. - -**/ -VOID -EFIAPI -AsyncNonBlockingTransferRoutine ( - EFI_EVENT Event, - VOID* Context - ); - -/** - Sends an ATA command to an ATA device that is attached to the ATA controller. This function - supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, - and the non-blocking I/O functionality is optional. - - @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. - @param[in] Port The port number of the ATA device to send the command. - @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. - If there is no port multiplier, then specify 0. - @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port - and PortMultiplierPort. - @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking - I/O is performed. If Event is NULL, then blocking I/O is performed. If - Event is not NULL and non blocking I/O is supported, then non-blocking - I/O is performed, and Event will be signaled when the ATA command completes. - - @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands, - InTransferLength bytes were transferred from InDataBuffer. For write and - bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer. - @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred - is returned in InTransferLength. For write and bi-directional commands, - OutTransferLength bytes were transferred by OutDataBuffer. - @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands - already queued. The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command. - @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA - command was not sent, so no additional status information is available. - -**/ -EFI_STATUS -EFIAPI -AtaPassThruPassThru ( - IN EFI_ATA_PASS_THRU_PROTOCOL *This, - IN UINT16 Port, - IN UINT16 PortMultiplierPort, - IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet, - IN EFI_EVENT Event OPTIONAL - ); - -/** - Used to retrieve the list of legal port numbers for ATA devices on an ATA controller. - These can either be the list of ports where ATA devices are actually present or the - list of legal port numbers for the ATA controller. Regardless, the caller of this - function must probe the port number returned to see if an ATA device is actually - present at that location on the ATA controller. - - The GetNextPort() function retrieves the port number on an ATA controller. If on input - Port is 0xFFFF, then the port number of the first port on the ATA controller is returned - in Port and EFI_SUCCESS is returned. - - If Port is a port number that was returned on a previous call to GetNextPort(), then the - port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS - is returned. If Port is not 0xFFFF and Port was not returned on a previous call to - GetNextPort(), then EFI_INVALID_PARAMETER is returned. - - If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is - returned. - - @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. - @param[in, out] Port On input, a pointer to the port number on the ATA controller. - On output, a pointer to the next port number on the ATA - controller. An input value of 0xFFFF retrieves the first port - number on the ATA controller. - - @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port. - @retval EFI_NOT_FOUND There are no more ports on this ATA controller. - @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call - to GetNextPort(). - -**/ -EFI_STATUS -EFIAPI -AtaPassThruGetNextPort ( - IN EFI_ATA_PASS_THRU_PROTOCOL *This, - IN OUT UINT16 *Port - ); - -/** - Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA - controller. These can either be the list of port multiplier ports where ATA devices are actually - present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this - function must probe the port number and port multiplier port number returned to see if an ATA - device is actually present. - - The GetNextDevice() function retrieves the port multiplier port number of an ATA device - present on a port of an ATA controller. - - If PortMultiplierPort points to a port multiplier port number value that was returned on a - previous call to GetNextDevice(), then the port multiplier port number of the next ATA device - on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is - returned. - - If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first - ATA device on port of the ATA controller is returned in PortMultiplierPort and - EFI_SUCCESS is returned. - - If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort - was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER - is returned. - - If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of - the ATA controller, then EFI_NOT_FOUND is returned. - - @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. - @param[in] Port The port number present on the ATA controller. - @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an - ATA device present on the ATA controller. - If on input a PortMultiplierPort of 0xFFFF is specified, - then the port multiplier port number of the first ATA device - is returned. On output, a pointer to the port multiplier port - number of the next ATA device present on an ATA controller. - - @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port - of the ATA controller was returned in PortMultiplierPort. - @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller. - @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not - returned on a previous call to GetNextDevice(). - -**/ -EFI_STATUS -EFIAPI -AtaPassThruGetNextDevice ( - IN EFI_ATA_PASS_THRU_PROTOCOL *This, - IN UINT16 Port, - IN OUT UINT16 *PortMultiplierPort - ); - -/** - Used to allocate and build a device path node for an ATA device on an ATA controller. - - The BuildDevicePath() function allocates and builds a single device node for the ATA - device specified by Port and PortMultiplierPort. If the ATA device specified by Port and - PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned. - If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough - resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned. - - Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of - DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort, - and EFI_SUCCESS is returned. - - @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. - @param[in] Port Port specifies the port number of the ATA device for which a - device path node is to be allocated and built. - @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a - device path node is to be allocated and built. If there is no - port multiplier, then specify 0. - @param[in, out] DevicePath A pointer to a single device path node that describes the ATA - device specified by Port and PortMultiplierPort. This function - is responsible for allocating the buffer DevicePath with the - boot service AllocatePool(). It is the caller's responsibility - to free DevicePath when the caller is finished with DevicePath. - @retval EFI_SUCCESS The device path node that describes the ATA device specified by - Port and PortMultiplierPort was allocated and returned in DevicePath. - @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not - exist on the ATA controller. - @retval EFI_INVALID_PARAMETER DevicePath is NULL. - @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. - -**/ -EFI_STATUS -EFIAPI -AtaPassThruBuildDevicePath ( - IN EFI_ATA_PASS_THRU_PROTOCOL *This, - IN UINT16 Port, - IN UINT16 PortMultiplierPort, - IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath - ); - -/** - Used to translate a device path node to a port number and port multiplier port number. - - The GetDevice() function determines the port and port multiplier port number associated with - the ATA device described by DevicePath. If DevicePath is a device path node type that the - ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents - DevicePath into a port number and port multiplier port number. - - If this translation is successful, then that port number and port multiplier port number are returned - in Port and PortMultiplierPort, and EFI_SUCCESS is returned. - - If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned. - - If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then - EFI_UNSUPPORTED is returned. - - If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not - a valid translation from DevicePath to a port number and port multiplier port number, then - EFI_NOT_FOUND is returned. - - @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. - @param[in] DevicePath A pointer to the device path node that describes an ATA device on the - ATA controller. - @param[out] Port On return, points to the port number of an ATA device on the ATA controller. - @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device - on the ATA controller. - - @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier - port number, and they were returned in Port and PortMultiplierPort. - @retval EFI_INVALID_PARAMETER DevicePath is NULL. - @retval EFI_INVALID_PARAMETER Port is NULL. - @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL. - @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath. - @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier - port number does not exist. - -**/ -EFI_STATUS -EFIAPI -AtaPassThruGetDevice ( - IN EFI_ATA_PASS_THRU_PROTOCOL *This, - IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, - OUT UINT16 *Port, - OUT UINT16 *PortMultiplierPort - ); - -/** - Resets a specific port on the ATA controller. This operation also resets all the ATA devices - connected to the port. - - The ResetChannel() function resets an a specific port on an ATA controller. This operation - resets all the ATA devices connected to that port. If this ATA controller does not support - a reset port operation, then EFI_UNSUPPORTED is returned. - - If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is - returned. - - If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned. - - If the port reset operation is completed, then EFI_SUCCESS is returned. - - @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. - @param[in] Port The port number on the ATA controller. - - @retval EFI_SUCCESS The ATA controller port was reset. - @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port. - @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port. - -**/ -EFI_STATUS -EFIAPI -AtaPassThruResetPort ( - IN EFI_ATA_PASS_THRU_PROTOCOL *This, - IN UINT16 Port - ); - -/** - Resets an ATA device that is connected to an ATA controller. - - The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort. - If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is - returned. - - If Port or PortMultiplierPort are not in a valid range for this ATA controller, then - EFI_INVALID_PARAMETER is returned. - - If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR - is returned. - - If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is - returned. - - If the device reset operation is completed, then EFI_SUCCESS is returned. - - @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. - @param[in] Port Port represents the port number of the ATA device to be reset. - @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset. - If there is no port multiplier, then specify 0. - @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset. - @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation. - @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device - specified by Port and PortMultiplierPort. - @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device - specified by Port and PortMultiplierPort. - -**/ -EFI_STATUS -EFIAPI -AtaPassThruResetDevice ( - IN EFI_ATA_PASS_THRU_PROTOCOL *This, - IN UINT16 Port, - IN UINT16 PortMultiplierPort - ); - -/** - Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function - supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the - nonblocking I/O functionality is optional. - - @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. - @param Target The Target is an array of size TARGET_MAX_BYTES and it represents - the id of the SCSI device to send the SCSI Request Packet. Each - transport driver may choose to utilize a subset of this size to suit the needs - of transport target representation. For example, a Fibre Channel driver - may use only 8 bytes (WWN) to represent an FC target. - @param Lun The LUN of the SCSI device to send the SCSI Request Packet. - @param Packet A pointer to the SCSI Request Packet to send to the SCSI device - specified by Target and Lun. - @param Event If nonblocking I/O is not supported then Event is ignored, and blocking - I/O is performed. If Event is NULL, then blocking I/O is performed. If - Event is not NULL and non blocking I/O is supported, then - nonblocking I/O is performed, and Event will be signaled when the - SCSI Request Packet completes. - - @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional - commands, InTransferLength bytes were transferred from - InDataBuffer. For write and bi-directional commands, - OutTransferLength bytes were transferred by - OutDataBuffer. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that - could be transferred is returned in InTransferLength. For write - and bi-directional commands, OutTransferLength bytes were - transferred by OutDataBuffer. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Request Packets already queued. The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request - Packet. - @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported - by the host adapter. This includes the case of Bi-directional SCSI - commands not supported by the implementation. The SCSI Request - Packet was not sent, so no additional status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. - -**/ -EFI_STATUS -EFIAPI -ExtScsiPassThruPassThru ( - IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, - IN UINT8 *Target, - IN UINT64 Lun, - IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, - IN EFI_EVENT Event OPTIONAL - ); - -/** - Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These - can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal - Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the - Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI - channel. - - @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. - @param Target On input, a pointer to the Target ID (an array of size - TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. - On output, a pointer to the Target ID (an array of - TARGET_MAX_BYTES) of the next SCSI device present on a SCSI - channel. An input value of 0xF(all bytes in the array are 0xF) in the - Target array retrieves the Target ID of the first SCSI device present on a - SCSI channel. - @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI - channel. On output, a pointer to the LUN of the next SCSI device present - on a SCSI channel. - - @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI - channel was returned in Target and Lun. - @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were - not returned on a previous call to GetNextTargetLun(). - @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. - -**/ -EFI_STATUS -EFIAPI -ExtScsiPassThruGetNextTargetLun ( - IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, - IN OUT UINT8 **Target, - IN OUT UINT64 *Lun - ); - -/** - Used to allocate and build a device path node for a SCSI device on a SCSI channel. - - @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. - @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the - Target ID of the SCSI device for which a device path node is to be - allocated and built. Transport drivers may chose to utilize a subset of - this size to suit the representation of targets. For example, a Fibre - Channel driver may use only 8 bytes (WWN) in the array to represent a - FC target. - @param Lun The LUN of the SCSI device for which a device path node is to be - allocated and built. - @param DevicePath A pointer to a single device path node that describes the SCSI device - specified by Target and Lun. This function is responsible for - allocating the buffer DevicePath with the boot service - AllocatePool(). It is the caller's responsibility to free - DevicePath when the caller is finished with DevicePath. - - @retval EFI_SUCCESS The device path node that describes the SCSI device specified by - Target and Lun was allocated and returned in - DevicePath. - @retval EFI_INVALID_PARAMETER DevicePath is NULL. - @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist - on the SCSI channel. - @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. - -**/ -EFI_STATUS -EFIAPI -ExtScsiPassThruBuildDevicePath ( - IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, - IN UINT8 *Target, - IN UINT64 Lun, - IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath - ); - -/** - Used to translate a device path node to a Target ID and LUN. - - @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. - @param DevicePath A pointer to a single device path node that describes the SCSI device - on the SCSI channel. - @param Target A pointer to the Target Array which represents the ID of a SCSI device - on the SCSI channel. - @param Lun A pointer to the LUN of a SCSI device on the SCSI channel. - - @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and - LUN, and they were returned in Target and Lun. - @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL. - @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN - does not exist. - @retval EFI_UNSUPPORTED This driver does not support the device path node type in - DevicePath. - -**/ -EFI_STATUS -EFIAPI -ExtScsiPassThruGetTargetLun ( - IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, - IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, - OUT UINT8 **Target, - OUT UINT64 *Lun - ); - -/** - Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel. - - @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. - - @retval EFI_SUCCESS The SCSI channel was reset. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel. - @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel. - @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation. - -**/ -EFI_STATUS -EFIAPI -ExtScsiPassThruResetChannel ( - IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This - ); - -/** - Resets a SCSI logical unit that is connected to a SCSI channel. - - @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. - @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the - target port ID of the SCSI device containing the SCSI logical unit to - reset. Transport drivers may chose to utilize a subset of this array to suit - the representation of their targets. - @param Lun The LUN of the SCSI device to reset. - - @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset. - @retval EFI_INVALID_PARAMETER Target or Lun is NULL. - @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device - specified by Target and Lun. - @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device - specified by Target and Lun. - -**/ -EFI_STATUS -EFIAPI -ExtScsiPassThruResetTargetLun ( - IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, - IN UINT8 *Target, - IN UINT64 Lun - ); - -/** - Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either - be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs - for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to - see if a SCSI device is actually present at that location on the SCSI channel. - - @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. - @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. - On output, a pointer to the Target ID (an array of - TARGET_MAX_BYTES) of the next SCSI device present on a SCSI - channel. An input value of 0xF(all bytes in the array are 0xF) in the - Target array retrieves the Target ID of the first SCSI device present on a - SCSI channel. - - @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI - channel was returned in Target. - @retval EFI_INVALID_PARAMETER Target or Lun is NULL. - @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not - returned on a previous call to GetNextTarget(). - @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. - -**/ -EFI_STATUS -EFIAPI -ExtScsiPassThruGetNextTarget ( - IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, - IN OUT UINT8 **Target - ); - -/** - Initialize ATA host controller at IDE mode. - - The function is designed to initialize ATA host controller. - - @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. - -**/ -EFI_STATUS -EFIAPI -IdeModeInitialization ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance - ); - -/** - Initialize ATA host controller at AHCI mode. - - The function is designed to initialize ATA host controller. - - @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. - -**/ -EFI_STATUS -EFIAPI -AhciModeInitialization ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance - ); - -/** - Start a non data transfer on specific port. - - @param[in] PciIo The PCI IO protocol instance. - @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. - @param[in] Port The number of port. - @param[in] PortMultiplier The timeout value of stop. - @param[in] AtapiCommand The atapi command will be used for the - transfer. - @param[in] AtapiCommandLength The length of the atapi command. - @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. - @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. - @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. - @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK - used by non-blocking mode. - - @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs. - @retval EFI_TIMEOUT The operation is time out. - @retval EFI_UNSUPPORTED The device is not ready for transfer. - @retval EFI_SUCCESS The non data transfer executes successfully. - -**/ -EFI_STATUS -EFIAPI -AhciNonDataTransfer ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_AHCI_REGISTERS *AhciRegisters, - IN UINT8 Port, - IN UINT8 PortMultiplier, - IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, - IN UINT8 AtapiCommandLength, - IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, - IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, - IN UINT64 Timeout, - IN ATA_NONBLOCK_TASK *Task - ); - -/** - Start a DMA data transfer on specific port - - @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance. - @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. - @param[in] Port The number of port. - @param[in] PortMultiplier The timeout value of stop. - @param[in] AtapiCommand The atapi command will be used for the - transfer. - @param[in] AtapiCommandLength The length of the atapi command. - @param[in] Read The transfer direction. - @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. - @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. - @param[in, out] MemoryAddr The pointer to the data buffer. - @param[in] DataCount The data count to be transferred. - @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. - @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK - used by non-blocking mode. - - @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs. - @retval EFI_TIMEOUT The operation is time out. - @retval EFI_UNSUPPORTED The device is not ready for transfer. - @retval EFI_SUCCESS The DMA data transfer executes successfully. - -**/ -EFI_STATUS -EFIAPI -AhciDmaTransfer ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, - IN EFI_AHCI_REGISTERS *AhciRegisters, - IN UINT8 Port, - IN UINT8 PortMultiplier, - IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, - IN UINT8 AtapiCommandLength, - IN BOOLEAN Read, - IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, - IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, - IN OUT VOID *MemoryAddr, - IN UINT32 DataCount, - IN UINT64 Timeout, - IN ATA_NONBLOCK_TASK *Task - ); - -/** - Start a PIO data transfer on specific port. - - @param[in] PciIo The PCI IO protocol instance. - @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. - @param[in] Port The number of port. - @param[in] PortMultiplier The timeout value of stop. - @param[in] AtapiCommand The atapi command will be used for the - transfer. - @param[in] AtapiCommandLength The length of the atapi command. - @param[in] Read The transfer direction. - @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. - @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. - @param[in, out] MemoryAddr The pointer to the data buffer. - @param[in] DataCount The data count to be transferred. - @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. - @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK - used by non-blocking mode. - - @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs. - @retval EFI_TIMEOUT The operation is time out. - @retval EFI_UNSUPPORTED The device is not ready for transfer. - @retval EFI_SUCCESS The PIO data transfer executes successfully. - -**/ -EFI_STATUS -EFIAPI -AhciPioTransfer ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_AHCI_REGISTERS *AhciRegisters, - IN UINT8 Port, - IN UINT8 PortMultiplier, - IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, - IN UINT8 AtapiCommandLength, - IN BOOLEAN Read, - IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, - IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, - IN OUT VOID *MemoryAddr, - IN UINT32 DataCount, - IN UINT64 Timeout, - IN ATA_NONBLOCK_TASK *Task - ); - -/** - Send ATA command into device with NON_DATA protocol - - @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE - data structure. - @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. - @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data - structure. - @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. - @param[in] Timeout The time to complete the command, uses 100ns as a unit. - @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK - used by non-blocking mode. - - @retval EFI_SUCCESS Reading succeed - @retval EFI_ABORTED Command failed - @retval EFI_DEVICE_ERROR Device status error. - -**/ -EFI_STATUS -EFIAPI -AtaNonDataCommandIn ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_IDE_REGISTERS *IdeRegisters, - IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, - IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, - IN UINT64 Timeout, - IN ATA_NONBLOCK_TASK *Task - ); - -/** - Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt). - - @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data - structure. - @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. - @param[in] Read Flag used to determine the data transfer - direction. Read equals 1, means data transferred - from device to host;Read equals 0, means data - transferred from host to device. - @param[in] DataBuffer A pointer to the source buffer for the data. - @param[in] DataLength The length of the data. - @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure. - @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. - @param[in] Timeout The time to complete the command, uses 100ns as a unit. - @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK - used by non-blocking mode. - - @retval EFI_SUCCESS the operation is successful. - @retval EFI_OUT_OF_RESOURCES Build PRD table failed - @retval EFI_UNSUPPORTED Unknown channel or operations command - @retval EFI_DEVICE_ERROR Ata command execute failed - -**/ -EFI_STATUS -EFIAPI -AtaUdmaInOut ( - IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, - IN EFI_IDE_REGISTERS *IdeRegisters, - IN BOOLEAN Read, - IN VOID *DataBuffer, - IN UINT64 DataLength, - IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, - IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, - IN UINT64 Timeout, - IN ATA_NONBLOCK_TASK *Task - ); - -/** - This function is used to send out ATA commands conforms to the PIO Data In Protocol. - - @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data - structure. - @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. - @param[in, out] Buffer A pointer to the source buffer for the data. - @param[in] ByteCount The length of the data. - @param[in] Read Flag used to determine the data transfer direction. - Read equals 1, means data transferred from device - to host;Read equals 0, means data transferred - from host to device. - @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure. - @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. - @param[in] Timeout The time to complete the command, uses 100ns as a unit. - @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK - used by non-blocking mode. - - @retval EFI_SUCCESS send out the ATA command and device send required data successfully. - @retval EFI_DEVICE_ERROR command sent failed. - -**/ -EFI_STATUS -EFIAPI -AtaPioDataInOut ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_IDE_REGISTERS *IdeRegisters, - IN OUT VOID *Buffer, - IN UINT64 ByteCount, - IN BOOLEAN Read, - IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, - IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, - IN UINT64 Timeout, - IN ATA_NONBLOCK_TASK *Task - ); - -#endif - +/** @file
+ Header file for ATA/ATAPI PASS THRU driver.
+
+ Copyright (c) 2010 - 2012, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#ifndef __ATA_ATAPI_PASS_THRU_H__
+#define __ATA_ATAPI_PASS_THRU_H__
+
+#include <Uefi.h>
+
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Atapi.h>
+#include <IndustryStandard/Scsi.h>
+
+#include <Protocol/PciIo.h>
+#include <Protocol/IdeControllerInit.h>
+#include <Protocol/AtaPassThru.h>
+#include <Protocol/ScsiPassThruExt.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/PciLib.h>
+#include <Library/PcdLib.h>
+#include <Library/TimerLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Library/DevicePathLib.h>
+
+#include "IdeMode.h"
+#include "AhciMode.h"
+
+extern EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding;
+extern EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2;
+
+#define ATA_ATAPI_PASS_THRU_SIGNATURE SIGNATURE_32 ('a', 'a', 'p', 't')
+#define ATA_ATAPI_DEVICE_SIGNATURE SIGNATURE_32 ('a', 'd', 'e', 'v')
+#define ATA_NONBLOCKING_TASK_SIGNATURE SIGNATURE_32 ('a', 't', 's', 'k')
+
+typedef struct _ATA_NONBLOCK_TASK ATA_NONBLOCK_TASK;
+
+typedef enum {
+ EfiAtaIdeMode,
+ EfiAtaAhciMode,
+ EfiAtaRaidMode,
+ EfiAtaUnknownMode
+} EFI_ATA_HC_WORK_MODE;
+
+typedef enum {
+ EfiIdeCdrom, /* ATAPI CDROM */
+ EfiIdeHarddisk, /* Hard Disk */
+ EfiPortMultiplier, /* Port Multiplier */
+ EfiIdeUnknown
+} EFI_ATA_DEVICE_TYPE;
+
+//
+// Ahci mode device info
+//
+typedef struct {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+
+ UINT16 Port;
+ UINT16 PortMultiplier;
+ EFI_ATA_DEVICE_TYPE Type;
+
+ EFI_IDENTIFY_DATA *IdentifyData;
+} EFI_ATA_DEVICE_INFO;
+
+typedef struct {
+ UINT32 Signature;
+
+ EFI_HANDLE ControllerHandle;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
+
+ EFI_ATA_PASS_THRU_MODE AtaPassThruMode;
+ EFI_ATA_PASS_THRU_PROTOCOL AtaPassThru;
+ EFI_EXT_SCSI_PASS_THRU_MODE ExtScsiPassThruMode;
+ EFI_EXT_SCSI_PASS_THRU_PROTOCOL ExtScsiPassThru;
+
+ EFI_ATA_HC_WORK_MODE Mode;
+
+ EFI_IDE_REGISTERS IdeRegisters[EfiIdeMaxChannel];
+ EFI_AHCI_REGISTERS AhciRegisters;
+
+ //
+ // The attached device list
+ //
+ LIST_ENTRY DeviceList;
+ UINT64 OriginalPciAttributes;
+
+ //
+ // For AtaPassThru protocol, using the following bytes to record the previous call in
+ // GetNextPort()/GetNextDevice().
+ //
+ UINT16 PreviousPort;
+ UINT16 PreviousPortMultiplier;
+ //
+ // For ExtScsiPassThru protocol, using the following bytes to record the previous call in
+ // GetNextTarget()/GetNextTargetLun().
+ //
+ UINT16 PreviousTargetId;
+ UINT64 PreviousLun;
+
+ //
+ // For Non-blocking.
+ //
+ EFI_EVENT TimerEvent;
+ LIST_ENTRY NonBlockingTaskList;
+} ATA_ATAPI_PASS_THRU_INSTANCE;
+
+//
+// Task for Non-blocking mode.
+//
+struct _ATA_NONBLOCK_TASK {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+
+ UINT16 Port;
+ UINT16 PortMultiplier;
+ EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet;
+ BOOLEAN IsStart;
+ EFI_EVENT Event;
+ UINT64 RetryTimes;
+ VOID *Map; // Pointer to map.
+ VOID *TableMap;// Pointer to PRD table map.
+ EFI_ATA_DMA_PRD *MapBaseAddress; // Pointer to range Base address for Map.
+ UINTN PageCount; // The page numbers used by PCIO freebuffer.
+};
+
+//
+// Timeout value which uses 100ns as a unit.
+// It means 3 second span.
+//
+#define ATA_ATAPI_TIMEOUT EFI_TIMER_PERIOD_SECONDS(3)
+
+#define IS_ALIGNED(addr, size) (((UINTN) (addr) & (size - 1)) == 0)
+
+#define ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \
+ CR (a, \
+ ATA_ATAPI_PASS_THRU_INSTANCE, \
+ AtaPassThru, \
+ ATA_ATAPI_PASS_THRU_SIGNATURE \
+ )
+
+#define EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \
+ CR (a, \
+ ATA_ATAPI_PASS_THRU_INSTANCE, \
+ ExtScsiPassThru, \
+ ATA_ATAPI_PASS_THRU_SIGNATURE \
+ )
+
+#define ATA_ATAPI_DEVICE_INFO_FROM_THIS(a) \
+ CR (a, \
+ EFI_ATA_DEVICE_INFO, \
+ Link, \
+ ATA_ATAPI_DEVICE_SIGNATURE \
+ );
+
+#define ATA_NON_BLOCK_TASK_FROM_ENTRY(a) \
+ CR (a, \
+ ATA_NONBLOCK_TASK, \
+ Link, \
+ ATA_NONBLOCKING_TASK_SIGNATURE \
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAtapiPassThruStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ );
+
+/**
+ Traverse the attached ATA devices list to find out the device to access.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in] DeviceType The device type of the ATA device.
+
+ @retval The pointer to the data structure of the device info to access.
+
+**/
+LIST_ENTRY *
+EFIAPI
+SearchDeviceInfoList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplier,
+ IN EFI_ATA_DEVICE_TYPE DeviceType
+ );
+
+/**
+ Allocate device info data structure to contain device info.
+ And insert the data structure to the tail of device list for tracing.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in] DeviceType The device type of the ATA device.
+ @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd.
+
+ @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list.
+ @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use.
+
+**/
+EFI_STATUS
+EFIAPI
+CreateNewDeviceInfo (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplier,
+ IN EFI_ATA_DEVICE_TYPE DeviceType,
+ IN EFI_IDENTIFY_DATA *IdentifyData
+ );
+
+/**
+ Destroy all attached ATA devices info.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+VOID
+EFIAPI
+DestroyDeviceInfoList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Destroy all pending non blocking tasks.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+ @param[in] IsSigEvent Indicate whether signal the task event when remove the
+ task.
+
+**/
+VOID
+EFIAPI
+DestroyAsynTaskList (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN BOOLEAN IsSigEvent
+ );
+
+/**
+ Enumerate all attached ATA devices at IDE mode or AHCI mode separately.
+
+ The function is designed to enumerate all attached ATA devices.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+ @retval EFI_SUCCESS Successfully enumerate attached ATA devices.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+EnumerateAttachedDevice (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Call back funtion when the timer event is signaled.
+
+ @param[in] Event The Event this notify function registered to.
+ @param[in] Context Pointer to the context data registered to the
+ Event.
+
+**/
+VOID
+EFIAPI
+AsyncNonBlockingTransferRoutine (
+ EFI_EVENT Event,
+ VOID* Context
+ );
+
+/**
+ Sends an ATA command to an ATA device that is attached to the ATA controller. This function
+ supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
+ and the non-blocking I/O functionality is optional.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number of the ATA device to send the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
+ If there is no port multiplier, then specify 0.
+ @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
+ and PortMultiplierPort.
+ @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If
+ Event is not NULL and non blocking I/O is supported, then non-blocking
+ I/O is performed, and Event will be signaled when the ATA command completes.
+
+ @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,
+ InTransferLength bytes were transferred from InDataBuffer. For write and
+ bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred
+ is returned in InTransferLength. For write and bi-directional commands,
+ OutTransferLength bytes were transferred by OutDataBuffer.
+ @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands
+ already queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.
+ @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA
+ command was not sent, so no additional status information is available.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruPassThru (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+/**
+ Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
+ These can either be the list of ports where ATA devices are actually present or the
+ list of legal port numbers for the ATA controller. Regardless, the caller of this
+ function must probe the port number returned to see if an ATA device is actually
+ present at that location on the ATA controller.
+
+ The GetNextPort() function retrieves the port number on an ATA controller. If on input
+ Port is 0xFFFF, then the port number of the first port on the ATA controller is returned
+ in Port and EFI_SUCCESS is returned.
+
+ If Port is a port number that was returned on a previous call to GetNextPort(), then the
+ port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS
+ is returned. If Port is not 0xFFFF and Port was not returned on a previous call to
+ GetNextPort(), then EFI_INVALID_PARAMETER is returned.
+
+ If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is
+ returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in, out] Port On input, a pointer to the port number on the ATA controller.
+ On output, a pointer to the next port number on the ATA
+ controller. An input value of 0xFFFF retrieves the first port
+ number on the ATA controller.
+
+ @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.
+ @retval EFI_NOT_FOUND There are no more ports on this ATA controller.
+ @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call
+ to GetNextPort().
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetNextPort (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT16 *Port
+ );
+
+/**
+ Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA
+ controller. These can either be the list of port multiplier ports where ATA devices are actually
+ present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this
+ function must probe the port number and port multiplier port number returned to see if an ATA
+ device is actually present.
+
+ The GetNextDevice() function retrieves the port multiplier port number of an ATA device
+ present on a port of an ATA controller.
+
+ If PortMultiplierPort points to a port multiplier port number value that was returned on a
+ previous call to GetNextDevice(), then the port multiplier port number of the next ATA device
+ on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is
+ returned.
+
+ If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first
+ ATA device on port of the ATA controller is returned in PortMultiplierPort and
+ EFI_SUCCESS is returned.
+
+ If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
+ was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
+ is returned.
+
+ If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of
+ the ATA controller, then EFI_NOT_FOUND is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number present on the ATA controller.
+ @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an
+ ATA device present on the ATA controller.
+ If on input a PortMultiplierPort of 0xFFFF is specified,
+ then the port multiplier port number of the first ATA device
+ is returned. On output, a pointer to the port multiplier port
+ number of the next ATA device present on an ATA controller.
+
+ @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port
+ of the ATA controller was returned in PortMultiplierPort.
+ @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not
+ returned on a previous call to GetNextDevice().
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetNextDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN OUT UINT16 *PortMultiplierPort
+ );
+
+/**
+ Used to allocate and build a device path node for an ATA device on an ATA controller.
+
+ The BuildDevicePath() function allocates and builds a single device node for the ATA
+ device specified by Port and PortMultiplierPort. If the ATA device specified by Port and
+ PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.
+ If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough
+ resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
+
+ Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
+ DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,
+ and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port Port specifies the port number of the ATA device for which a
+ device path node is to be allocated and built.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
+ device path node is to be allocated and built. If there is no
+ port multiplier, then specify 0.
+ @param[in, out] DevicePath A pointer to a single device path node that describes the ATA
+ device specified by Port and PortMultiplierPort. This function
+ is responsible for allocating the buffer DevicePath with the
+ boot service AllocatePool(). It is the caller's responsibility
+ to free DevicePath when the caller is finished with DevicePath.
+ @retval EFI_SUCCESS The device path node that describes the ATA device specified by
+ Port and PortMultiplierPort was allocated and returned in DevicePath.
+ @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not
+ exist on the ATA controller.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruBuildDevicePath (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+/**
+ Used to translate a device path node to a port number and port multiplier port number.
+
+ The GetDevice() function determines the port and port multiplier port number associated with
+ the ATA device described by DevicePath. If DevicePath is a device path node type that the
+ ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents
+ DevicePath into a port number and port multiplier port number.
+
+ If this translation is successful, then that port number and port multiplier port number are returned
+ in Port and PortMultiplierPort, and EFI_SUCCESS is returned.
+
+ If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.
+
+ If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then
+ EFI_UNSUPPORTED is returned.
+
+ If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not
+ a valid translation from DevicePath to a port number and port multiplier port number, then
+ EFI_NOT_FOUND is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] DevicePath A pointer to the device path node that describes an ATA device on the
+ ATA controller.
+ @param[out] Port On return, points to the port number of an ATA device on the ATA controller.
+ @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device
+ on the ATA controller.
+
+ @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier
+ port number, and they were returned in Port and PortMultiplierPort.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_INVALID_PARAMETER Port is NULL.
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier
+ port number does not exist.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruGetDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT16 *Port,
+ OUT UINT16 *PortMultiplierPort
+ );
+
+/**
+ Resets a specific port on the ATA controller. This operation also resets all the ATA devices
+ connected to the port.
+
+ The ResetChannel() function resets an a specific port on an ATA controller. This operation
+ resets all the ATA devices connected to that port. If this ATA controller does not support
+ a reset port operation, then EFI_UNSUPPORTED is returned.
+
+ If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is
+ returned.
+
+ If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.
+
+ If the port reset operation is completed, then EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port The port number on the ATA controller.
+
+ @retval EFI_SUCCESS The ATA controller port was reset.
+ @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruResetPort (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port
+ );
+
+/**
+ Resets an ATA device that is connected to an ATA controller.
+
+ The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.
+ If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is
+ returned.
+
+ If Port or PortMultiplierPort are not in a valid range for this ATA controller, then
+ EFI_INVALID_PARAMETER is returned.
+
+ If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR
+ is returned.
+
+ If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is
+ returned.
+
+ If the device reset operation is completed, then EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
+ @param[in] Port Port represents the port number of the ATA device to be reset.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.
+ If there is no port multiplier, then specify 0.
+ @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.
+ @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.
+ @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device
+ specified by Port and PortMultiplierPort.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device
+ specified by Port and PortMultiplierPort.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPassThruResetDevice (
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort
+ );
+
+/**
+ Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
+ supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
+ nonblocking I/O functionality is optional.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it represents
+ the id of the SCSI device to send the SCSI Request Packet. Each
+ transport driver may choose to utilize a subset of this size to suit the needs
+ of transport target representation. For example, a Fibre Channel driver
+ may use only 8 bytes (WWN) to represent an FC target.
+ @param Lun The LUN of the SCSI device to send the SCSI Request Packet.
+ @param Packet A pointer to the SCSI Request Packet to send to the SCSI device
+ specified by Target and Lun.
+ @param Event If nonblocking I/O is not supported then Event is ignored, and blocking
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If
+ Event is not NULL and non blocking I/O is supported, then
+ nonblocking I/O is performed, and Event will be signaled when the
+ SCSI Request Packet completes.
+
+ @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
+ commands, InTransferLength bytes were transferred from
+ InDataBuffer. For write and bi-directional commands,
+ OutTransferLength bytes were transferred by
+ OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
+ could be transferred is returned in InTransferLength. For write
+ and bi-directional commands, OutTransferLength bytes were
+ transferred by OutDataBuffer.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Request Packets already queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
+ Packet.
+ @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
+ by the host adapter. This includes the case of Bi-directional SCSI
+ commands not supported by the implementation. The SCSI Request
+ Packet was not sent, so no additional status information is available.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruPassThru (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+/**
+ Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
+ can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
+ Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
+ Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
+ channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target On input, a pointer to the Target ID (an array of size
+ TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+ @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
+ channel. On output, a pointer to the LUN of the next SCSI device present
+ on a SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
+ channel was returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
+ not returned on a previous call to GetNextTargetLun().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetNextTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target,
+ IN OUT UINT64 *Lun
+ );
+
+/**
+ Used to allocate and build a device path node for a SCSI device on a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
+ Target ID of the SCSI device for which a device path node is to be
+ allocated and built. Transport drivers may chose to utilize a subset of
+ this size to suit the representation of targets. For example, a Fibre
+ Channel driver may use only 8 bytes (WWN) in the array to represent a
+ FC target.
+ @param Lun The LUN of the SCSI device for which a device path node is to be
+ allocated and built.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ specified by Target and Lun. This function is responsible for
+ allocating the buffer DevicePath with the boot service
+ AllocatePool(). It is the caller's responsibility to free
+ DevicePath when the caller is finished with DevicePath.
+
+ @retval EFI_SUCCESS The device path node that describes the SCSI device specified by
+ Target and Lun was allocated and returned in
+ DevicePath.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
+ on the SCSI channel.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruBuildDevicePath (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+/**
+ Used to translate a device path node to a Target ID and LUN.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ on the SCSI channel.
+ @param Target A pointer to the Target Array which represents the ID of a SCSI device
+ on the SCSI channel.
+ @param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
+
+ @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
+ LUN, and they were returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
+ does not exist.
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in
+ DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 **Target,
+ OUT UINT64 *Lun
+ );
+
+/**
+ Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The SCSI channel was reset.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruResetChannel (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
+ );
+
+/**
+ Resets a SCSI logical unit that is connected to a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
+ target port ID of the SCSI device containing the SCSI logical unit to
+ reset. Transport drivers may chose to utilize a subset of this array to suit
+ the representation of their targets.
+ @param Lun The LUN of the SCSI device to reset.
+
+ @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruResetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun
+ );
+
+/**
+ Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
+ be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
+ for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
+ see if a SCSI device is actually present at that location on the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
+ channel was returned in Target.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
+ returned on a previous call to GetNextTarget().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtScsiPassThruGetNextTarget (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target
+ );
+
+/**
+ Initialize ATA host controller at IDE mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeModeInitialization (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Initialize ATA host controller at AHCI mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciModeInitialization (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
+ );
+
+/**
+ Start a non data transfer on specific port.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The non data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciNonDataTransfer (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Start a DMA data transfer on specific port
+
+ @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] Read The transfer direction.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in, out] MemoryAddr The pointer to the data buffer.
+ @param[in] DataCount The data count to be transferred.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The DMA data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciDmaTransfer (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Start a PIO data transfer on specific port.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
+ @param[in] Port The number of port.
+ @param[in] PortMultiplier The timeout value of stop.
+ @param[in] AtapiCommand The atapi command will be used for the
+ transfer.
+ @param[in] AtapiCommandLength The length of the atapi command.
+ @param[in] Read The transfer direction.
+ @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
+ @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
+ @param[in, out] MemoryAddr The pointer to the data buffer.
+ @param[in] DataCount The data count to be transferred.
+ @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The PIO data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPioTransfer (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_AHCI_REGISTERS *AhciRegisters,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Send ATA command into device with NON_DATA protocol
+
+ @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE
+ data structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data
+ structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS Reading succeed
+ @retval EFI_ABORTED Command failed
+ @retval EFI_DEVICE_ERROR Device status error.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaNonDataCommandIn (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt).
+
+ @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
+ structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in] Read Flag used to determine the data transfer
+ direction. Read equals 1, means data transferred
+ from device to host;Read equals 0, means data
+ transferred from host to device.
+ @param[in] DataBuffer A pointer to the source buffer for the data.
+ @param[in] DataLength The length of the data.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS the operation is successful.
+ @retval EFI_OUT_OF_RESOURCES Build PRD table failed
+ @retval EFI_UNSUPPORTED Unknown channel or operations command
+ @retval EFI_DEVICE_ERROR Ata command execute failed
+
+**/
+EFI_STATUS
+EFIAPI
+AtaUdmaInOut (
+ IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN BOOLEAN Read,
+ IN VOID *DataBuffer,
+ IN UINT64 DataLength,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+/**
+ This function is used to send out ATA commands conforms to the PIO Data In Protocol.
+
+ @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
+ structure.
+ @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
+ @param[in, out] Buffer A pointer to the source buffer for the data.
+ @param[in] ByteCount The length of the data.
+ @param[in] Read Flag used to determine the data transfer direction.
+ Read equals 1, means data transferred from device
+ to host;Read equals 0, means data transferred
+ from host to device.
+ @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
+ @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
+ @param[in] Timeout The time to complete the command, uses 100ns as a unit.
+ @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
+ used by non-blocking mode.
+
+ @retval EFI_SUCCESS send out the ATA command and device send required data successfully.
+ @retval EFI_DEVICE_ERROR command sent failed.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaPioDataInOut (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_IDE_REGISTERS *IdeRegisters,
+ IN OUT VOID *Buffer,
+ IN UINT64 ByteCount,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN UINT64 Timeout,
+ IN ATA_NONBLOCK_TASK *Task
+ );
+
+#endif
+
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.c b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.c index 66af190..ea108a8 100644 --- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.c +++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.c @@ -1,162 +1,162 @@ -/** @file - This file is used to implement the EFI_DISK_INFO_PROTOCOL interface.. - - Copyright (c) 2013, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php. - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "NvmExpress.h" - -EFI_DISK_INFO_PROTOCOL gNvmExpressDiskInfoProtocolTemplate = { - EFI_DISK_INFO_NVME_INTERFACE_GUID, - NvmExpressDiskInfoInquiry, - NvmExpressDiskInfoIdentify, - NvmExpressDiskInfoSenseData, - NvmExpressDiskInfoWhichIde -}; - -/** - Initialize the installation of DiskInfo protocol. - - This function prepares for the installation of DiskInfo protocol on the child handle. - By default, it installs DiskInfo protocol with NVME interface GUID. - - @param[in] Device The pointer of NVME_DEVICE_PRIVATE_DATA. - -**/ -VOID -InitializeDiskInfo ( - IN NVME_DEVICE_PRIVATE_DATA *Device - ) -{ - CopyMem (&Device->DiskInfo, &gNvmExpressDiskInfoProtocolTemplate, sizeof (EFI_DISK_INFO_PROTOCOL)); -} - - -/** - Provides inquiry information for the controller type. - - This function is used to get inquiry data. Data format - of Identify data is defined by the Interface GUID. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance. - @param[in, out] InquiryData Pointer to a buffer for the inquiry data. - @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size. - - @retval EFI_SUCCESS The command was accepted without any errors. - @retval EFI_NOT_FOUND Device does not support this data class - @retval EFI_DEVICE_ERROR Error reading InquiryData from device - @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoInquiry ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *InquiryData, - IN OUT UINT32 *InquiryDataSize - ) -{ - return EFI_NOT_FOUND; -} - - -/** - Provides identify information for the controller type. - - This function is used to get identify data. Data format - of Identify data is defined by the Interface GUID. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL - instance. - @param[in, out] IdentifyData Pointer to a buffer for the identify data. - @param[in, out] IdentifyDataSize Pointer to the value for the identify data - size. - - @retval EFI_SUCCESS The command was accepted without any errors. - @retval EFI_NOT_FOUND Device does not support this data class - @retval EFI_DEVICE_ERROR Error reading IdentifyData from device - @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoIdentify ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *IdentifyData, - IN OUT UINT32 *IdentifyDataSize - ) -{ - EFI_STATUS Status; - NVME_DEVICE_PRIVATE_DATA *Device; - - Device = NVME_DEVICE_PRIVATE_DATA_FROM_DISK_INFO (This); - - Status = EFI_BUFFER_TOO_SMALL; - if (*IdentifyDataSize >= sizeof (Device->NamespaceData)) { - Status = EFI_SUCCESS; - CopyMem (IdentifyData, &Device->NamespaceData, sizeof (Device->NamespaceData)); - } - *IdentifyDataSize = sizeof (Device->NamespaceData); - return Status; -} - -/** - Provides sense data information for the controller type. - - This function is used to get sense data. - Data format of Sense data is defined by the Interface GUID. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance. - @param[in, out] SenseData Pointer to the SenseData. - @param[in, out] SenseDataSize Size of SenseData in bytes. - @param[out] SenseDataNumber Pointer to the value for the sense data size. - - @retval EFI_SUCCESS The command was accepted without any errors. - @retval EFI_NOT_FOUND Device does not support this data class. - @retval EFI_DEVICE_ERROR Error reading SenseData from device. - @retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough. - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoSenseData ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *SenseData, - IN OUT UINT32 *SenseDataSize, - OUT UINT8 *SenseDataNumber - ) -{ - return EFI_NOT_FOUND; -} - - -/** - This function is used to get controller information. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance. - @param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary. - @param[out] IdeDevice Pointer to the Ide Device number. Master or slave. - - @retval EFI_SUCCESS IdeChannel and IdeDevice are valid. - @retval EFI_UNSUPPORTED This is not an IDE device. - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoWhichIde ( - IN EFI_DISK_INFO_PROTOCOL *This, - OUT UINT32 *IdeChannel, - OUT UINT32 *IdeDevice - ) -{ - return EFI_UNSUPPORTED; -} - +/** @file
+ This file is used to implement the EFI_DISK_INFO_PROTOCOL interface..
+
+ Copyright (c) 2013, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "NvmExpress.h"
+
+EFI_DISK_INFO_PROTOCOL gNvmExpressDiskInfoProtocolTemplate = {
+ EFI_DISK_INFO_NVME_INTERFACE_GUID,
+ NvmExpressDiskInfoInquiry,
+ NvmExpressDiskInfoIdentify,
+ NvmExpressDiskInfoSenseData,
+ NvmExpressDiskInfoWhichIde
+};
+
+/**
+ Initialize the installation of DiskInfo protocol.
+
+ This function prepares for the installation of DiskInfo protocol on the child handle.
+ By default, it installs DiskInfo protocol with NVME interface GUID.
+
+ @param[in] Device The pointer of NVME_DEVICE_PRIVATE_DATA.
+
+**/
+VOID
+InitializeDiskInfo (
+ IN NVME_DEVICE_PRIVATE_DATA *Device
+ )
+{
+ CopyMem (&Device->DiskInfo, &gNvmExpressDiskInfoProtocolTemplate, sizeof (EFI_DISK_INFO_PROTOCOL));
+}
+
+
+/**
+ Provides inquiry information for the controller type.
+
+ This function is used to get inquiry data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in, out] InquiryData Pointer to a buffer for the inquiry data.
+ @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoInquiry (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *InquiryData,
+ IN OUT UINT32 *InquiryDataSize
+ )
+{
+ return EFI_NOT_FOUND;
+}
+
+
+/**
+ Provides identify information for the controller type.
+
+ This function is used to get identify data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ instance.
+ @param[in, out] IdentifyData Pointer to a buffer for the identify data.
+ @param[in, out] IdentifyDataSize Pointer to the value for the identify data
+ size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoIdentify (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *IdentifyData,
+ IN OUT UINT32 *IdentifyDataSize
+ )
+{
+ EFI_STATUS Status;
+ NVME_DEVICE_PRIVATE_DATA *Device;
+
+ Device = NVME_DEVICE_PRIVATE_DATA_FROM_DISK_INFO (This);
+
+ Status = EFI_BUFFER_TOO_SMALL;
+ if (*IdentifyDataSize >= sizeof (Device->NamespaceData)) {
+ Status = EFI_SUCCESS;
+ CopyMem (IdentifyData, &Device->NamespaceData, sizeof (Device->NamespaceData));
+ }
+ *IdentifyDataSize = sizeof (Device->NamespaceData);
+ return Status;
+}
+
+/**
+ Provides sense data information for the controller type.
+
+ This function is used to get sense data.
+ Data format of Sense data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in, out] SenseData Pointer to the SenseData.
+ @param[in, out] SenseDataSize Size of SenseData in bytes.
+ @param[out] SenseDataNumber Pointer to the value for the sense data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class.
+ @retval EFI_DEVICE_ERROR Error reading SenseData from device.
+ @retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough.
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoSenseData (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *SenseData,
+ IN OUT UINT32 *SenseDataSize,
+ OUT UINT8 *SenseDataNumber
+ )
+{
+ return EFI_NOT_FOUND;
+}
+
+
+/**
+ This function is used to get controller information.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
+ @param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
+
+ @retval EFI_SUCCESS IdeChannel and IdeDevice are valid.
+ @retval EFI_UNSUPPORTED This is not an IDE device.
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoWhichIde (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ OUT UINT32 *IdeChannel,
+ OUT UINT32 *IdeDevice
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.h b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.h index 7db3dff..f07cfe3 100644 --- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.h +++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDiskInfo.h @@ -1,129 +1,129 @@ -/** @file - Header file for EFI_DISK_INFO_PROTOCOL interface. - -Copyright (c) 2013, Intel Corporation. All rights reserved.<BR> -This program and the accompanying materials -are licensed and made available under the terms and conditions of the BSD License -which accompanies this distribution. The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef _NVME_DISKINFO_H_ -#define _NVME_DISKINFO_H_ - -/** - Initialize the installation of DiskInfo protocol. - - This function prepares for the installation of DiskInfo protocol on the child handle. - By default, it installs DiskInfo protocol with NVME interface GUID. - - @param[in] Device The pointer of NVME_DEVICE_PRIVATE_DATA. - -**/ -VOID -InitializeDiskInfo ( - IN NVME_DEVICE_PRIVATE_DATA *Device - ); - - -/** - Provides inquiry information for the controller type. - - This function is used to get inquiry data. Data format - of Identify data is defined by the Interface GUID. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance. - @param[in, out] InquiryData Pointer to a buffer for the inquiry data. - @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size. - - @retval EFI_SUCCESS The command was accepted without any errors. - @retval EFI_NOT_FOUND Device does not support this data class - @retval EFI_DEVICE_ERROR Error reading InquiryData from device - @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoInquiry ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *InquiryData, - IN OUT UINT32 *InquiryDataSize - ); - -/** - Provides identify information for the controller type. - - This function is used to get identify data. Data format - of Identify data is defined by the Interface GUID. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL - instance. - @param[in, out] IdentifyData Pointer to a buffer for the identify data. - @param[in, out] IdentifyDataSize Pointer to the value for the identify data - size. - - @retval EFI_SUCCESS The command was accepted without any errors. - @retval EFI_NOT_FOUND Device does not support this data class - @retval EFI_DEVICE_ERROR Error reading IdentifyData from device - @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoIdentify ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *IdentifyData, - IN OUT UINT32 *IdentifyDataSize - ); - -/** - Provides sense data information for the controller type. - - This function is used to get sense data. - Data format of Sense data is defined by the Interface GUID. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance. - @param[in, out] SenseData Pointer to the SenseData. - @param[in, out] SenseDataSize Size of SenseData in bytes. - @param[out] SenseDataNumber Pointer to the value for the sense data size. - - @retval EFI_SUCCESS The command was accepted without any errors. - @retval EFI_NOT_FOUND Device does not support this data class. - @retval EFI_DEVICE_ERROR Error reading SenseData from device. - @retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough. - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoSenseData ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *SenseData, - IN OUT UINT32 *SenseDataSize, - OUT UINT8 *SenseDataNumber - ); - - -/** - This function is used to get controller information. - - @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance. - @param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary. - @param[out] IdeDevice Pointer to the Ide Device number. Master or slave. - - @retval EFI_SUCCESS IdeChannel and IdeDevice are valid. - @retval EFI_UNSUPPORTED This is not an IDE device. - -**/ -EFI_STATUS -EFIAPI -NvmExpressDiskInfoWhichIde ( - IN EFI_DISK_INFO_PROTOCOL *This, - OUT UINT32 *IdeChannel, - OUT UINT32 *IdeDevice - ); - -#endif +/** @file
+ Header file for EFI_DISK_INFO_PROTOCOL interface.
+
+Copyright (c) 2013, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _NVME_DISKINFO_H_
+#define _NVME_DISKINFO_H_
+
+/**
+ Initialize the installation of DiskInfo protocol.
+
+ This function prepares for the installation of DiskInfo protocol on the child handle.
+ By default, it installs DiskInfo protocol with NVME interface GUID.
+
+ @param[in] Device The pointer of NVME_DEVICE_PRIVATE_DATA.
+
+**/
+VOID
+InitializeDiskInfo (
+ IN NVME_DEVICE_PRIVATE_DATA *Device
+ );
+
+
+/**
+ Provides inquiry information for the controller type.
+
+ This function is used to get inquiry data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in, out] InquiryData Pointer to a buffer for the inquiry data.
+ @param[in, out] InquiryDataSize Pointer to the value for the inquiry data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoInquiry (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *InquiryData,
+ IN OUT UINT32 *InquiryDataSize
+ );
+
+/**
+ Provides identify information for the controller type.
+
+ This function is used to get identify data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ instance.
+ @param[in, out] IdentifyData Pointer to a buffer for the identify data.
+ @param[in, out] IdentifyDataSize Pointer to the value for the identify data
+ size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoIdentify (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *IdentifyData,
+ IN OUT UINT32 *IdentifyDataSize
+ );
+
+/**
+ Provides sense data information for the controller type.
+
+ This function is used to get sense data.
+ Data format of Sense data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in, out] SenseData Pointer to the SenseData.
+ @param[in, out] SenseDataSize Size of SenseData in bytes.
+ @param[out] SenseDataNumber Pointer to the value for the sense data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class.
+ @retval EFI_DEVICE_ERROR Error reading SenseData from device.
+ @retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough.
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoSenseData (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *SenseData,
+ IN OUT UINT32 *SenseDataSize,
+ OUT UINT8 *SenseDataNumber
+ );
+
+
+/**
+ This function is used to get controller information.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
+ @param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
+
+ @retval EFI_SUCCESS IdeChannel and IdeDevice are valid.
+ @retval EFI_UNSUPPORTED This is not an IDE device.
+
+**/
+EFI_STATUS
+EFIAPI
+NvmExpressDiskInfoWhichIde (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ OUT UINT32 *IdeChannel,
+ OUT UINT32 *IdeDevice
+ );
+
+#endif
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c index a831abe..bd30861 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c @@ -1,2205 +1,2205 @@ -/** @file - The XHCI controller driver. - -Copyright (c) 2011 - 2013, Intel Corporation. All rights reserved.<BR> -This program and the accompanying materials -are licensed and made available under the terms and conditions of the BSD License -which accompanies this distribution. The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "Xhci.h" - -// -// Two arrays used to translate the XHCI port state (change) -// to the UEFI protocol's port state (change). -// -USB_PORT_STATE_MAP mUsbPortStateMap[] = { - {XHC_PORTSC_CCS, USB_PORT_STAT_CONNECTION}, - {XHC_PORTSC_PED, USB_PORT_STAT_ENABLE}, - {XHC_PORTSC_OCA, USB_PORT_STAT_OVERCURRENT}, - {XHC_PORTSC_RESET, USB_PORT_STAT_RESET} -}; - -USB_PORT_STATE_MAP mUsbPortChangeMap[] = { - {XHC_PORTSC_CSC, USB_PORT_STAT_C_CONNECTION}, - {XHC_PORTSC_PEC, USB_PORT_STAT_C_ENABLE}, - {XHC_PORTSC_OCC, USB_PORT_STAT_C_OVERCURRENT}, - {XHC_PORTSC_PRC, USB_PORT_STAT_C_RESET} -}; - -USB_CLEAR_PORT_MAP mUsbClearPortChangeMap[] = { - {XHC_PORTSC_CSC, EfiUsbPortConnectChange}, - {XHC_PORTSC_PEC, EfiUsbPortEnableChange}, - {XHC_PORTSC_OCC, EfiUsbPortOverCurrentChange}, - {XHC_PORTSC_PRC, EfiUsbPortResetChange} -}; - -USB_PORT_STATE_MAP mUsbHubPortStateMap[] = { - {XHC_HUB_PORTSC_CCS, USB_PORT_STAT_CONNECTION}, - {XHC_HUB_PORTSC_PED, USB_PORT_STAT_ENABLE}, - {XHC_HUB_PORTSC_OCA, USB_PORT_STAT_OVERCURRENT}, - {XHC_HUB_PORTSC_RESET, USB_PORT_STAT_RESET} -}; - -USB_PORT_STATE_MAP mUsbHubPortChangeMap[] = { - {XHC_HUB_PORTSC_CSC, USB_PORT_STAT_C_CONNECTION}, - {XHC_HUB_PORTSC_PEC, USB_PORT_STAT_C_ENABLE}, - {XHC_HUB_PORTSC_OCC, USB_PORT_STAT_C_OVERCURRENT}, - {XHC_HUB_PORTSC_PRC, USB_PORT_STAT_C_RESET} -}; - -USB_CLEAR_PORT_MAP mUsbHubClearPortChangeMap[] = { - {XHC_HUB_PORTSC_CSC, EfiUsbPortConnectChange}, - {XHC_HUB_PORTSC_PEC, EfiUsbPortEnableChange}, - {XHC_HUB_PORTSC_OCC, EfiUsbPortOverCurrentChange}, - {XHC_HUB_PORTSC_PRC, EfiUsbPortResetChange}, - {XHC_HUB_PORTSC_BHRC, Usb3PortBHPortResetChange} -}; - -EFI_DRIVER_BINDING_PROTOCOL gXhciDriverBinding = { - XhcDriverBindingSupported, - XhcDriverBindingStart, - XhcDriverBindingStop, - 0x30, - NULL, - NULL -}; - -// -// Template for Xhci's Usb2 Host Controller Protocol Instance. -// -EFI_USB2_HC_PROTOCOL gXhciUsb2HcTemplate = { - XhcGetCapability, - XhcReset, - XhcGetState, - XhcSetState, - XhcControlTransfer, - XhcBulkTransfer, - XhcAsyncInterruptTransfer, - XhcSyncInterruptTransfer, - XhcIsochronousTransfer, - XhcAsyncIsochronousTransfer, - XhcGetRootHubPortStatus, - XhcSetRootHubPortFeature, - XhcClearRootHubPortFeature, - 0x3, - 0x0 -}; - -/** - Retrieves the capability of root hub ports. - - @param This The EFI_USB2_HC_PROTOCOL instance. - @param MaxSpeed Max speed supported by the controller. - @param PortNumber Number of the root hub ports. - @param Is64BitCapable Whether the controller supports 64-bit memory - addressing. - - @retval EFI_SUCCESS Host controller capability were retrieved successfully. - @retval EFI_INVALID_PARAMETER Either of the three capability pointer is NULL. - -**/ -EFI_STATUS -EFIAPI -XhcGetCapability ( - IN EFI_USB2_HC_PROTOCOL *This, - OUT UINT8 *MaxSpeed, - OUT UINT8 *PortNumber, - OUT UINT8 *Is64BitCapable - ) -{ - USB_XHCI_INSTANCE *Xhc; - EFI_TPL OldTpl; - - if ((MaxSpeed == NULL) || (PortNumber == NULL) || (Is64BitCapable == NULL)) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - *MaxSpeed = EFI_USB_SPEED_SUPER; - *PortNumber = (UINT8) (Xhc->HcSParams1.Data.MaxPorts); - *Is64BitCapable = (UINT8) (Xhc->HcCParams.Data.Ac64); - DEBUG ((EFI_D_INFO, "XhcGetCapability: %d ports, 64 bit %d\n", *PortNumber, *Is64BitCapable)); - - gBS->RestoreTPL (OldTpl); - - return EFI_SUCCESS; -} - - -/** - Provides software reset for the USB host controller. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param Attributes A bit mask of the reset operation to perform. - - @retval EFI_SUCCESS The reset operation succeeded. - @retval EFI_INVALID_PARAMETER Attributes is not valid. - @retval EFI_UNSUPPOURTED The type of reset specified by Attributes is - not currently supported by the host controller. - @retval EFI_DEVICE_ERROR Host controller isn't halted to reset. - -**/ -EFI_STATUS -EFIAPI -XhcReset ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT16 Attributes - ) -{ - USB_XHCI_INSTANCE *Xhc; - EFI_STATUS Status; - EFI_TPL OldTpl; - - Xhc = XHC_FROM_THIS (This); - - if (Xhc->DevicePath != NULL) { - // - // Report Status Code to indicate reset happens - // - REPORT_STATUS_CODE_WITH_DEVICE_PATH ( - EFI_PROGRESS_CODE, - (EFI_IO_BUS_USB | EFI_IOB_PC_RESET), - Xhc->DevicePath - ); - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - switch (Attributes) { - case EFI_USB_HC_RESET_GLOBAL: - // - // Flow through, same behavior as Host Controller Reset - // - case EFI_USB_HC_RESET_HOST_CONTROLLER: - if ((Xhc->DebugCapSupOffset != 0xFFFFFFFF) && ((XhcReadExtCapReg (Xhc, Xhc->DebugCapSupOffset) & 0xFF) == XHC_CAP_USB_DEBUG) && - ((XhcReadExtCapReg (Xhc, Xhc->DebugCapSupOffset + XHC_DC_DCCTRL) & BIT0) != 0)) { - Status = EFI_SUCCESS; - goto ON_EXIT; - } - // - // Host Controller must be Halt when Reset it - // - if (!XhcIsHalt (Xhc)) { - Status = XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT); - - if (EFI_ERROR (Status)) { - Status = EFI_DEVICE_ERROR; - goto ON_EXIT; - } - } - - Status = XhcResetHC (Xhc, XHC_RESET_TIMEOUT); - ASSERT (!(XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_CNR))); - - if (EFI_ERROR (Status)) { - goto ON_EXIT; - } - // - // Clean up the asynchronous transfers, currently only - // interrupt supports asynchronous operation. - // - XhciDelAllAsyncIntTransfers (Xhc); - XhcFreeSched (Xhc); - - XhcInitSched (Xhc); - break; - - case EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG: - case EFI_USB_HC_RESET_HOST_WITH_DEBUG: - Status = EFI_UNSUPPORTED; - break; - - default: - Status = EFI_INVALID_PARAMETER; - } - -ON_EXIT: - DEBUG ((EFI_D_INFO, "XhcReset: status %r\n", Status)); - gBS->RestoreTPL (OldTpl); - - return Status; -} - - -/** - Retrieve the current state of the USB host controller. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param State Variable to return the current host controller - state. - - @retval EFI_SUCCESS Host controller state was returned in State. - @retval EFI_INVALID_PARAMETER State is NULL. - @retval EFI_DEVICE_ERROR An error was encountered while attempting to - retrieve the host controller's current state. - -**/ -EFI_STATUS -EFIAPI -XhcGetState ( - IN EFI_USB2_HC_PROTOCOL *This, - OUT EFI_USB_HC_STATE *State - ) -{ - USB_XHCI_INSTANCE *Xhc; - EFI_TPL OldTpl; - - if (State == NULL) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - - if (XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HALT)) { - *State = EfiUsbHcStateHalt; - } else { - *State = EfiUsbHcStateOperational; - } - - DEBUG ((EFI_D_INFO, "XhcGetState: current state %d\n", *State)); - gBS->RestoreTPL (OldTpl); - - return EFI_SUCCESS; -} - -/** - Sets the USB host controller to a specific state. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param State The state of the host controller that will be set. - - @retval EFI_SUCCESS The USB host controller was successfully placed - in the state specified by State. - @retval EFI_INVALID_PARAMETER State is invalid. - @retval EFI_DEVICE_ERROR Failed to set the state due to device error. - -**/ -EFI_STATUS -EFIAPI -XhcSetState ( - IN EFI_USB2_HC_PROTOCOL *This, - IN EFI_USB_HC_STATE State - ) -{ - USB_XHCI_INSTANCE *Xhc; - EFI_STATUS Status; - EFI_USB_HC_STATE CurState; - EFI_TPL OldTpl; - - Status = XhcGetState (This, &CurState); - - if (EFI_ERROR (Status)) { - return EFI_DEVICE_ERROR; - } - - if (CurState == State) { - return EFI_SUCCESS; - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - - switch (State) { - case EfiUsbHcStateHalt: - Status = XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT); - break; - - case EfiUsbHcStateOperational: - if (XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HSE)) { - Status = EFI_DEVICE_ERROR; - break; - } - - // - // Software must not write a one to this field unless the host controller - // is in the Halted state. Doing so will yield undefined results. - // refers to Spec[XHCI1.0-2.3.1] - // - if (!XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HALT)) { - Status = EFI_DEVICE_ERROR; - break; - } - - Status = XhcRunHC (Xhc, XHC_GENERIC_TIMEOUT); - break; - - case EfiUsbHcStateSuspend: - Status = EFI_UNSUPPORTED; - break; - - default: - Status = EFI_INVALID_PARAMETER; - } - - DEBUG ((EFI_D_INFO, "XhcSetState: status %r\n", Status)); - gBS->RestoreTPL (OldTpl); - - return Status; -} - -/** - Retrieves the current status of a USB root hub port. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param PortNumber The root hub port to retrieve the state from. - This value is zero-based. - @param PortStatus Variable to receive the port state. - - @retval EFI_SUCCESS The status of the USB root hub port specified. - by PortNumber was returned in PortStatus. - @retval EFI_INVALID_PARAMETER PortNumber is invalid. - @retval EFI_DEVICE_ERROR Can't read register. - -**/ -EFI_STATUS -EFIAPI -XhcGetRootHubPortStatus ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 PortNumber, - OUT EFI_USB_PORT_STATUS *PortStatus - ) -{ - USB_XHCI_INSTANCE *Xhc; - UINT32 Offset; - UINT32 State; - UINT32 TotalPort; - UINTN Index; - UINTN MapSize; - EFI_STATUS Status; - USB_DEV_ROUTE ParentRouteChart; - EFI_TPL OldTpl; - - if (PortStatus == NULL) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - Status = EFI_SUCCESS; - - TotalPort = Xhc->HcSParams1.Data.MaxPorts; - - if (PortNumber >= TotalPort) { - Status = EFI_INVALID_PARAMETER; - goto ON_EXIT; - } - - Offset = (UINT32) (XHC_PORTSC_OFFSET + (0x10 * PortNumber)); - PortStatus->PortStatus = 0; - PortStatus->PortChangeStatus = 0; - - State = XhcReadOpReg (Xhc, Offset); - - // - // According to XHCI 1.0 spec, bit 10~13 of the root port status register identifies the speed of the attached device. - // - switch ((State & XHC_PORTSC_PS) >> 10) { - case 2: - PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED; - break; - - case 3: - PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED; - break; - - case 4: - PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED; - break; - - default: - break; - } - - // - // Convert the XHCI port/port change state to UEFI status - // - MapSize = sizeof (mUsbPortStateMap) / sizeof (USB_PORT_STATE_MAP); - - for (Index = 0; Index < MapSize; Index++) { - if (XHC_BIT_IS_SET (State, mUsbPortStateMap[Index].HwState)) { - PortStatus->PortStatus = (UINT16) (PortStatus->PortStatus | mUsbPortStateMap[Index].UefiState); - } - } - // - // Bit5~8 reflects its current link state. - // - if ((State & XHC_PORTSC_PLS) >> 5 == 3) { - PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND; - } - - MapSize = sizeof (mUsbPortChangeMap) / sizeof (USB_PORT_STATE_MAP); - - for (Index = 0; Index < MapSize; Index++) { - if (XHC_BIT_IS_SET (State, mUsbPortChangeMap[Index].HwState)) { - PortStatus->PortChangeStatus = (UINT16) (PortStatus->PortChangeStatus | mUsbPortChangeMap[Index].UefiState); - } - } - - MapSize = sizeof (mUsbClearPortChangeMap) / sizeof (USB_CLEAR_PORT_MAP); - - for (Index = 0; Index < MapSize; Index++) { - if (XHC_BIT_IS_SET (State, mUsbClearPortChangeMap[Index].HwState)) { - XhcClearRootHubPortFeature (This, PortNumber, (EFI_USB_PORT_FEATURE)mUsbClearPortChangeMap[Index].Selector); - } - } - - // - // Poll the root port status register to enable/disable corresponding device slot if there is a device attached/detached. - // For those devices behind hub, we get its attach/detach event by hooking Get_Port_Status request at control transfer for those hub. - // - ParentRouteChart.Dword = 0; - XhcPollPortStatusChange (Xhc, ParentRouteChart, PortNumber, PortStatus); - -ON_EXIT: - gBS->RestoreTPL (OldTpl); - return Status; -} - - -/** - Sets a feature for the specified root hub port. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param PortNumber Root hub port to set. - @param PortFeature Feature to set. - - @retval EFI_SUCCESS The feature specified by PortFeature was set. - @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid. - @retval EFI_DEVICE_ERROR Can't read register. - -**/ -EFI_STATUS -EFIAPI -XhcSetRootHubPortFeature ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 PortNumber, - IN EFI_USB_PORT_FEATURE PortFeature - ) -{ - USB_XHCI_INSTANCE *Xhc; - UINT32 Offset; - UINT32 State; - UINT32 TotalPort; - EFI_STATUS Status; - EFI_TPL OldTpl; - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - Status = EFI_SUCCESS; - - TotalPort = (Xhc->HcSParams1.Data.MaxPorts); - - if (PortNumber >= TotalPort) { - Status = EFI_INVALID_PARAMETER; - goto ON_EXIT; - } - - Offset = (UINT32) (XHC_PORTSC_OFFSET + (0x10 * PortNumber)); - State = XhcReadOpReg (Xhc, Offset); - - // - // Mask off the port status change bits, these bits are - // write clean bit - // - State &= ~ (BIT1 | BIT17 | BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23); - - switch (PortFeature) { - case EfiUsbPortEnable: - // - // Ports may only be enabled by the xHC. Software cannot enable a port by writing a '1' to this flag. - // A port may be disabled by software writing a '1' to this flag. - // - Status = EFI_SUCCESS; - break; - - case EfiUsbPortSuspend: - State |= XHC_PORTSC_LWS; - XhcWriteOpReg (Xhc, Offset, State); - State &= ~XHC_PORTSC_PLS; - State |= (3 << 5) ; - XhcWriteOpReg (Xhc, Offset, State); - break; - - case EfiUsbPortReset: - DEBUG ((EFI_D_INFO, "XhcUsbPortReset!\n")); - // - // Make sure Host Controller not halt before reset it - // - if (XhcIsHalt (Xhc)) { - Status = XhcRunHC (Xhc, XHC_GENERIC_TIMEOUT); - - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_INFO, "XhcSetRootHubPortFeature :failed to start HC - %r\n", Status)); - break; - } - } - - // - // 4.3.1 Resetting a Root Hub Port - // 1) Write the PORTSC register with the Port Reset (PR) bit set to '1'. - // - State |= XHC_PORTSC_RESET; - XhcWriteOpReg (Xhc, Offset, State); - XhcWaitOpRegBit(Xhc, Offset, XHC_PORTSC_PRC, TRUE, XHC_GENERIC_TIMEOUT); - break; - - case EfiUsbPortPower: - // - // Not supported, ignore the operation - // - Status = EFI_SUCCESS; - break; - - case EfiUsbPortOwner: - // - // XHCI root hub port don't has the owner bit, ignore the operation - // - Status = EFI_SUCCESS; - break; - - default: - Status = EFI_INVALID_PARAMETER; - } - -ON_EXIT: - DEBUG ((EFI_D_INFO, "XhcSetRootHubPortFeature: status %r\n", Status)); - gBS->RestoreTPL (OldTpl); - - return Status; -} - - -/** - Clears a feature for the specified root hub port. - - @param This A pointer to the EFI_USB2_HC_PROTOCOL instance. - @param PortNumber Specifies the root hub port whose feature is - requested to be cleared. - @param PortFeature Indicates the feature selector associated with the - feature clear request. - - @retval EFI_SUCCESS The feature specified by PortFeature was cleared - for the USB root hub port specified by PortNumber. - @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid. - @retval EFI_DEVICE_ERROR Can't read register. - -**/ -EFI_STATUS -EFIAPI -XhcClearRootHubPortFeature ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 PortNumber, - IN EFI_USB_PORT_FEATURE PortFeature - ) -{ - USB_XHCI_INSTANCE *Xhc; - UINT32 Offset; - UINT32 State; - UINT32 TotalPort; - EFI_STATUS Status; - EFI_TPL OldTpl; - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - Status = EFI_SUCCESS; - - TotalPort = (Xhc->HcSParams1.Data.MaxPorts); - - if (PortNumber >= TotalPort) { - Status = EFI_INVALID_PARAMETER; - goto ON_EXIT; - } - - Offset = XHC_PORTSC_OFFSET + (0x10 * PortNumber); - - // - // Mask off the port status change bits, these bits are - // write clean bit - // - State = XhcReadOpReg (Xhc, Offset); - State &= ~ (BIT1 | BIT17 | BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23); - - switch (PortFeature) { - case EfiUsbPortEnable: - // - // Ports may only be enabled by the xHC. Software cannot enable a port by writing a '1' to this flag. - // A port may be disabled by software writing a '1' to this flag. - // - State |= XHC_PORTSC_PED; - State &= ~XHC_PORTSC_RESET; - XhcWriteOpReg (Xhc, Offset, State); - break; - - case EfiUsbPortSuspend: - State |= XHC_PORTSC_LWS; - XhcWriteOpReg (Xhc, Offset, State); - State &= ~XHC_PORTSC_PLS; - XhcWriteOpReg (Xhc, Offset, State); - break; - - case EfiUsbPortReset: - // - // PORTSC_RESET BIT(4) bit is RW1S attribute, which means Write-1-to-set status: - // Register bits indicate status when read, a clear bit may be set by - // writing a '1'. Writing a '0' to RW1S bits has no effect. - // - break; - - case EfiUsbPortOwner: - // - // XHCI root hub port don't has the owner bit, ignore the operation - // - break; - - case EfiUsbPortConnectChange: - // - // Clear connect status change - // - State |= XHC_PORTSC_CSC; - XhcWriteOpReg (Xhc, Offset, State); - break; - - case EfiUsbPortEnableChange: - // - // Clear enable status change - // - State |= XHC_PORTSC_PEC; - XhcWriteOpReg (Xhc, Offset, State); - break; - - case EfiUsbPortOverCurrentChange: - // - // Clear PortOverCurrent change - // - State |= XHC_PORTSC_OCC; - XhcWriteOpReg (Xhc, Offset, State); - break; - - case EfiUsbPortResetChange: - // - // Clear Port Reset change - // - State |= XHC_PORTSC_PRC; - XhcWriteOpReg (Xhc, Offset, State); - break; - - case EfiUsbPortPower: - case EfiUsbPortSuspendChange: - // - // Not supported or not related operation - // - break; - - default: - Status = EFI_INVALID_PARAMETER; - break; - } - -ON_EXIT: - DEBUG ((EFI_D_INFO, "XhcClearRootHubPortFeature: status %r\n", Status)); - gBS->RestoreTPL (OldTpl); - - return Status; -} - - -/** - Submits control transfer to a target USB device. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param DeviceAddress The target device address. - @param DeviceSpeed Target device speed. - @param MaximumPacketLength Maximum packet size the default control transfer - endpoint is capable of sending or receiving. - @param Request USB device request to send. - @param TransferDirection Specifies the data direction for the data stage - @param Data Data buffer to be transmitted or received from USB - device. - @param DataLength The size (in bytes) of the data buffer. - @param Timeout Indicates the maximum timeout, in millisecond. - @param Translator Transaction translator to be used by this device. - @param TransferResult Return the result of this control transfer. - - @retval EFI_SUCCESS Transfer was completed successfully. - @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources. - @retval EFI_INVALID_PARAMETER Some parameters are invalid. - @retval EFI_TIMEOUT Transfer failed due to timeout. - @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error. - -**/ -EFI_STATUS -EFIAPI -XhcControlTransfer ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 DeviceAddress, - IN UINT8 DeviceSpeed, - IN UINTN MaximumPacketLength, - IN EFI_USB_DEVICE_REQUEST *Request, - IN EFI_USB_DATA_DIRECTION TransferDirection, - IN OUT VOID *Data, - IN OUT UINTN *DataLength, - IN UINTN Timeout, - IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator, - OUT UINT32 *TransferResult - ) -{ - USB_XHCI_INSTANCE *Xhc; - URB *Urb; - UINT8 Endpoint; - UINT8 Index; - UINT8 DescriptorType; - UINT8 SlotId; - UINT8 TTT; - UINT8 MTT; - UINT32 MaxPacket0; - EFI_USB_HUB_DESCRIPTOR *HubDesc; - EFI_TPL OldTpl; - EFI_STATUS Status; - EFI_STATUS RecoveryStatus; - UINTN MapSize; - EFI_USB_PORT_STATUS PortStatus; - UINT32 State; - EFI_USB_DEVICE_REQUEST ClearPortRequest; - UINTN Len; - - // - // Validate parameters - // - if ((Request == NULL) || (TransferResult == NULL)) { - return EFI_INVALID_PARAMETER; - } - - if ((TransferDirection != EfiUsbDataIn) && - (TransferDirection != EfiUsbDataOut) && - (TransferDirection != EfiUsbNoData)) { - return EFI_INVALID_PARAMETER; - } - - if ((TransferDirection == EfiUsbNoData) && - ((Data != NULL) || (*DataLength != 0))) { - return EFI_INVALID_PARAMETER; - } - - if ((TransferDirection != EfiUsbNoData) && - ((Data == NULL) || (*DataLength == 0))) { - return EFI_INVALID_PARAMETER; - } - - if ((MaximumPacketLength != 8) && (MaximumPacketLength != 16) && - (MaximumPacketLength != 32) && (MaximumPacketLength != 64) && - (MaximumPacketLength != 512) - ) { - return EFI_INVALID_PARAMETER; - } - - if ((DeviceSpeed == EFI_USB_SPEED_LOW) && (MaximumPacketLength != 8)) { - return EFI_INVALID_PARAMETER; - } - - if ((DeviceSpeed == EFI_USB_SPEED_SUPER) && (MaximumPacketLength != 512)) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - - Status = EFI_DEVICE_ERROR; - *TransferResult = EFI_USB_ERR_SYSTEM; - Len = 0; - - if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) { - DEBUG ((EFI_D_ERROR, "XhcControlTransfer: HC halted at entrance\n")); - goto ON_EXIT; - } - - // - // Check if the device is still enabled before every transaction. - // - SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress); - if (SlotId == 0) { - goto ON_EXIT; - } - - // - // Hook the Set_Address request from UsbBus. - // According to XHCI 1.0 spec, the Set_Address request is replaced by XHCI's Address_Device cmd. - // - if ((Request->Request == USB_REQ_SET_ADDRESS) && - (Request->RequestType == USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE))) { - // - // Reset the BusDevAddr field of all disabled entries in UsbDevContext array firstly. - // This way is used to clean the history to avoid using wrong device address by XhcAsyncInterruptTransfer(). - // - for (Index = 0; Index < 255; Index++) { - if (!Xhc->UsbDevContext[Index + 1].Enabled && - (Xhc->UsbDevContext[Index + 1].SlotId == 0) && - (Xhc->UsbDevContext[Index + 1].BusDevAddr == (UINT8)Request->Value)) { - Xhc->UsbDevContext[Index + 1].BusDevAddr = 0; - } - } - - if (Xhc->UsbDevContext[SlotId].XhciDevAddr == 0) { - Status = EFI_DEVICE_ERROR; - goto ON_EXIT; - } - // - // The actual device address has been assigned by XHCI during initializing the device slot. - // So we just need establish the mapping relationship between the device address requested from UsbBus - // and the actual device address assigned by XHCI. The the following invocations through EFI_USB2_HC_PROTOCOL interface - // can find out the actual device address by it. - // - Xhc->UsbDevContext[SlotId].BusDevAddr = (UINT8)Request->Value; - Status = EFI_SUCCESS; - goto ON_EXIT; - } - - // - // Create a new URB, insert it into the asynchronous - // schedule list, then poll the execution status. - // Note that we encode the direction in address although default control - // endpoint is bidirectional. XhcCreateUrb expects this - // combination of Ep addr and its direction. - // - Endpoint = (UINT8) (0 | ((TransferDirection == EfiUsbDataIn) ? 0x80 : 0)); - Urb = XhcCreateUrb ( - Xhc, - DeviceAddress, - Endpoint, - DeviceSpeed, - MaximumPacketLength, - XHC_CTRL_TRANSFER, - Request, - Data, - *DataLength, - NULL, - NULL - ); - - if (Urb == NULL) { - DEBUG ((EFI_D_ERROR, "XhcControlTransfer: failed to create URB")); - Status = EFI_OUT_OF_RESOURCES; - goto ON_EXIT; - } - - Status = XhcExecTransfer (Xhc, FALSE, Urb, Timeout); - - // - // Get the status from URB. The result is updated in XhcCheckUrbResult - // which is called by XhcExecTransfer - // - *TransferResult = Urb->Result; - *DataLength = Urb->Completed; - - if (*TransferResult == EFI_USB_NOERROR) { - Status = EFI_SUCCESS; - } else if (*TransferResult == EFI_USB_ERR_STALL) { - RecoveryStatus = XhcRecoverHaltedEndpoint(Xhc, Urb); - if (EFI_ERROR (RecoveryStatus)) { - DEBUG ((EFI_D_ERROR, "XhcControlTransfer: XhcRecoverHaltedEndpoint failed\n")); - } - Status = EFI_DEVICE_ERROR; - goto FREE_URB; - } else { - goto FREE_URB; - } - - Xhc->PciIo->Flush (Xhc->PciIo); - - if (Urb->DataMap != NULL) { - Status = Xhc->PciIo->Unmap (Xhc->PciIo, Urb->DataMap); - ASSERT_EFI_ERROR (Status); - if (EFI_ERROR (Status)) { - Status = EFI_DEVICE_ERROR; - goto FREE_URB; - } - } - - // - // Hook Get_Descriptor request from UsbBus as we need evaluate context and configure endpoint. - // Hook Get_Status request form UsbBus as we need trace device attach/detach event happened at hub. - // Hook Set_Config request from UsbBus as we need configure device endpoint. - // - if ((Request->Request == USB_REQ_GET_DESCRIPTOR) && - ((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE)) || - ((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_CLASS, USB_TARGET_DEVICE))))) { - DescriptorType = (UINT8)(Request->Value >> 8); - if ((DescriptorType == USB_DESC_TYPE_DEVICE) && ((*DataLength == sizeof (EFI_USB_DEVICE_DESCRIPTOR)) || ((DeviceSpeed == EFI_USB_SPEED_FULL) && (*DataLength == 8)))) { - ASSERT (Data != NULL); - // - // Store a copy of device scriptor as hub device need this info to configure endpoint. - // - CopyMem (&Xhc->UsbDevContext[SlotId].DevDesc, Data, *DataLength); - if (Xhc->UsbDevContext[SlotId].DevDesc.BcdUSB == 0x0300) { - // - // If it's a usb3.0 device, then its max packet size is a 2^n. - // - MaxPacket0 = 1 << Xhc->UsbDevContext[SlotId].DevDesc.MaxPacketSize0; - } else { - MaxPacket0 = Xhc->UsbDevContext[SlotId].DevDesc.MaxPacketSize0; - } - Xhc->UsbDevContext[SlotId].ConfDesc = AllocateZeroPool (Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations * sizeof (EFI_USB_CONFIG_DESCRIPTOR *)); - if (Xhc->HcCParams.Data.Csz == 0) { - Status = XhcEvaluateContext (Xhc, SlotId, MaxPacket0); - } else { - Status = XhcEvaluateContext64 (Xhc, SlotId, MaxPacket0); - } - } else if (DescriptorType == USB_DESC_TYPE_CONFIG) { - ASSERT (Data != NULL); - if (*DataLength == ((UINT16 *)Data)[1]) { - // - // Get configuration value from request, Store the configuration descriptor for Configure_Endpoint cmd. - // - Index = (UINT8)Request->Value; - ASSERT (Index < Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations); - Xhc->UsbDevContext[SlotId].ConfDesc[Index] = AllocateZeroPool(*DataLength); - CopyMem (Xhc->UsbDevContext[SlotId].ConfDesc[Index], Data, *DataLength); - } - } else if (((DescriptorType == USB_DESC_TYPE_HUB) || - (DescriptorType == USB_DESC_TYPE_HUB_SUPER_SPEED)) && (*DataLength > 2)) { - ASSERT (Data != NULL); - HubDesc = (EFI_USB_HUB_DESCRIPTOR *)Data; - ASSERT (HubDesc->NumPorts <= 15); - // - // The bit 5,6 of HubCharacter field of Hub Descriptor is TTT. - // - TTT = (UINT8)((HubDesc->HubCharacter & (BIT5 | BIT6)) >> 5); - if (Xhc->UsbDevContext[SlotId].DevDesc.DeviceProtocol == 2) { - // - // Don't support multi-TT feature for super speed hub now. - // - MTT = 0; - DEBUG ((EFI_D_ERROR, "XHCI: Don't support multi-TT feature for Hub now. (force to disable MTT)\n")); - } else { - MTT = 0; - } - - if (Xhc->HcCParams.Data.Csz == 0) { - Status = XhcConfigHubContext (Xhc, SlotId, HubDesc->NumPorts, TTT, MTT); - } else { - Status = XhcConfigHubContext64 (Xhc, SlotId, HubDesc->NumPorts, TTT, MTT); - } - } - } else if ((Request->Request == USB_REQ_SET_CONFIG) && - (Request->RequestType == USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE))) { - // - // Hook Set_Config request from UsbBus as we need configure device endpoint. - // - for (Index = 0; Index < Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations; Index++) { - if (Xhc->UsbDevContext[SlotId].ConfDesc[Index]->ConfigurationValue == (UINT8)Request->Value) { - if (Xhc->HcCParams.Data.Csz == 0) { - Status = XhcSetConfigCmd (Xhc, SlotId, DeviceSpeed, Xhc->UsbDevContext[SlotId].ConfDesc[Index]); - } else { - Status = XhcSetConfigCmd64 (Xhc, SlotId, DeviceSpeed, Xhc->UsbDevContext[SlotId].ConfDesc[Index]); - } - break; - } - } - } else if ((Request->Request == USB_REQ_GET_STATUS) && - (Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_CLASS, USB_TARGET_OTHER))) { - ASSERT (Data != NULL); - // - // Hook Get_Status request from UsbBus to keep track of the port status change. - // - State = *(UINT32 *)Data; - PortStatus.PortStatus = 0; - PortStatus.PortChangeStatus = 0; - - if (DeviceSpeed == EFI_USB_SPEED_SUPER) { - // - // For super speed hub, its bit10~12 presents the attached device speed. - // - if ((State & XHC_PORTSC_PS) >> 10 == 0) { - PortStatus.PortStatus |= USB_PORT_STAT_SUPER_SPEED; - } - } else { - // - // For high or full/low speed hub, its bit9~10 presents the attached device speed. - // - if (XHC_BIT_IS_SET (State, BIT9)) { - PortStatus.PortStatus |= USB_PORT_STAT_LOW_SPEED; - } else if (XHC_BIT_IS_SET (State, BIT10)) { - PortStatus.PortStatus |= USB_PORT_STAT_HIGH_SPEED; - } - } - - // - // Convert the XHCI port/port change state to UEFI status - // - MapSize = sizeof (mUsbHubPortStateMap) / sizeof (USB_PORT_STATE_MAP); - for (Index = 0; Index < MapSize; Index++) { - if (XHC_BIT_IS_SET (State, mUsbHubPortStateMap[Index].HwState)) { - PortStatus.PortStatus = (UINT16) (PortStatus.PortStatus | mUsbHubPortStateMap[Index].UefiState); - } - } - - MapSize = sizeof (mUsbHubPortChangeMap) / sizeof (USB_PORT_STATE_MAP); - for (Index = 0; Index < MapSize; Index++) { - if (XHC_BIT_IS_SET (State, mUsbHubPortChangeMap[Index].HwState)) { - PortStatus.PortChangeStatus = (UINT16) (PortStatus.PortChangeStatus | mUsbHubPortChangeMap[Index].UefiState); - } - } - - MapSize = sizeof (mUsbHubClearPortChangeMap) / sizeof (USB_CLEAR_PORT_MAP); - - for (Index = 0; Index < MapSize; Index++) { - if (XHC_BIT_IS_SET (State, mUsbHubClearPortChangeMap[Index].HwState)) { - ZeroMem (&ClearPortRequest, sizeof (EFI_USB_DEVICE_REQUEST)); - ClearPortRequest.RequestType = USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_CLASS, USB_TARGET_OTHER); - ClearPortRequest.Request = (UINT8) USB_REQ_CLEAR_FEATURE; - ClearPortRequest.Value = mUsbHubClearPortChangeMap[Index].Selector; - ClearPortRequest.Index = Request->Index; - ClearPortRequest.Length = 0; - - XhcControlTransfer ( - This, - DeviceAddress, - DeviceSpeed, - MaximumPacketLength, - &ClearPortRequest, - EfiUsbNoData, - NULL, - &Len, - Timeout, - Translator, - TransferResult - ); - } - } - - XhcPollPortStatusChange (Xhc, Xhc->UsbDevContext[SlotId].RouteString, (UINT8)Request->Index, &PortStatus); - - *(UINT32 *)Data = *(UINT32*)&PortStatus; - } - -FREE_URB: - FreePool (Urb); - -ON_EXIT: - - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "XhcControlTransfer: error - %r, transfer - %x\n", Status, *TransferResult)); - } - - gBS->RestoreTPL (OldTpl); - - return Status; -} - - -/** - Submits bulk transfer to a bulk endpoint of a USB device. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param DeviceAddress Target device address. - @param EndPointAddress Endpoint number and its direction in bit 7. - @param DeviceSpeed Device speed, Low speed device doesn't support bulk - transfer. - @param MaximumPacketLength Maximum packet size the endpoint is capable of - sending or receiving. - @param DataBuffersNumber Number of data buffers prepared for the transfer. - @param Data Array of pointers to the buffers of data to transmit - from or receive into. - @param DataLength The lenght of the data buffer. - @param DataToggle On input, the initial data toggle for the transfer; - On output, it is updated to to next data toggle to - use of the subsequent bulk transfer. - @param Timeout Indicates the maximum time, in millisecond, which - the transfer is allowed to complete. - @param Translator A pointr to the transaction translator data. - @param TransferResult A pointer to the detailed result information of the - bulk transfer. - - @retval EFI_SUCCESS The transfer was completed successfully. - @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource. - @retval EFI_INVALID_PARAMETER Some parameters are invalid. - @retval EFI_TIMEOUT The transfer failed due to timeout. - @retval EFI_DEVICE_ERROR The transfer failed due to host controller error. - -**/ -EFI_STATUS -EFIAPI -XhcBulkTransfer ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 DeviceAddress, - IN UINT8 EndPointAddress, - IN UINT8 DeviceSpeed, - IN UINTN MaximumPacketLength, - IN UINT8 DataBuffersNumber, - IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM], - IN OUT UINTN *DataLength, - IN OUT UINT8 *DataToggle, - IN UINTN Timeout, - IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator, - OUT UINT32 *TransferResult - ) -{ - USB_XHCI_INSTANCE *Xhc; - URB *Urb; - UINT8 SlotId; - EFI_STATUS Status; - EFI_STATUS RecoveryStatus; - EFI_TPL OldTpl; - - // - // Validate the parameters - // - if ((DataLength == NULL) || (*DataLength == 0) || - (Data == NULL) || (Data[0] == NULL) || (TransferResult == NULL)) { - return EFI_INVALID_PARAMETER; - } - - if ((*DataToggle != 0) && (*DataToggle != 1)) { - return EFI_INVALID_PARAMETER; - } - - if ((DeviceSpeed == EFI_USB_SPEED_LOW) || - ((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) || - ((EFI_USB_SPEED_HIGH == DeviceSpeed) && (MaximumPacketLength > 512)) || - ((EFI_USB_SPEED_SUPER == DeviceSpeed) && (MaximumPacketLength > 1024))) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - - *TransferResult = EFI_USB_ERR_SYSTEM; - Status = EFI_DEVICE_ERROR; - - if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) { - DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: HC is halted\n")); - goto ON_EXIT; - } - - // - // Check if the device is still enabled before every transaction. - // - SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress); - if (SlotId == 0) { - goto ON_EXIT; - } - - // - // Create a new URB, insert it into the asynchronous - // schedule list, then poll the execution status. - // - Urb = XhcCreateUrb ( - Xhc, - DeviceAddress, - EndPointAddress, - DeviceSpeed, - MaximumPacketLength, - XHC_BULK_TRANSFER, - NULL, - Data[0], - *DataLength, - NULL, - NULL - ); - - if (Urb == NULL) { - DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: failed to create URB\n")); - Status = EFI_OUT_OF_RESOURCES; - goto ON_EXIT; - } - - Status = XhcExecTransfer (Xhc, FALSE, Urb, Timeout); - - *TransferResult = Urb->Result; - *DataLength = Urb->Completed; - - if (*TransferResult == EFI_USB_NOERROR) { - Status = EFI_SUCCESS; - } else if (*TransferResult == EFI_USB_ERR_STALL) { - RecoveryStatus = XhcRecoverHaltedEndpoint(Xhc, Urb); - if (EFI_ERROR (RecoveryStatus)) { - DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: XhcRecoverHaltedEndpoint failed\n")); - } - Status = EFI_DEVICE_ERROR; - } - - Xhc->PciIo->Flush (Xhc->PciIo); - XhcFreeUrb (Xhc, Urb); - -ON_EXIT: - - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: error - %r, transfer - %x\n", Status, *TransferResult)); - } - gBS->RestoreTPL (OldTpl); - - return Status; -} - -/** - Submits an asynchronous interrupt transfer to an - interrupt endpoint of a USB device. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param DeviceAddress Target device address. - @param EndPointAddress Endpoint number and its direction encoded in bit 7 - @param DeviceSpeed Indicates device speed. - @param MaximumPacketLength Maximum packet size the target endpoint is capable - @param IsNewTransfer If TRUE, to submit an new asynchronous interrupt - transfer If FALSE, to remove the specified - asynchronous interrupt. - @param DataToggle On input, the initial data toggle to use; on output, - it is updated to indicate the next data toggle. - @param PollingInterval The he interval, in milliseconds, that the transfer - is polled. - @param DataLength The length of data to receive at the rate specified - by PollingInterval. - @param Translator Transaction translator to use. - @param CallBackFunction Function to call at the rate specified by - PollingInterval. - @param Context Context to CallBackFunction. - - @retval EFI_SUCCESS The request has been successfully submitted or canceled. - @retval EFI_INVALID_PARAMETER Some parameters are invalid. - @retval EFI_OUT_OF_RESOURCES The request failed due to a lack of resources. - @retval EFI_DEVICE_ERROR The transfer failed due to host controller error. - -**/ -EFI_STATUS -EFIAPI -XhcAsyncInterruptTransfer ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 DeviceAddress, - IN UINT8 EndPointAddress, - IN UINT8 DeviceSpeed, - IN UINTN MaximumPacketLength, - IN BOOLEAN IsNewTransfer, - IN OUT UINT8 *DataToggle, - IN UINTN PollingInterval, - IN UINTN DataLength, - IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator, - IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction, - IN VOID *Context OPTIONAL - ) -{ - USB_XHCI_INSTANCE *Xhc; - URB *Urb; - EFI_STATUS Status; - UINT8 SlotId; - UINT8 Index; - UINT8 *Data; - EFI_TPL OldTpl; - - // - // Validate parameters - // - if (!XHCI_IS_DATAIN (EndPointAddress)) { - return EFI_INVALID_PARAMETER; - } - - if (IsNewTransfer) { - if (DataLength == 0) { - return EFI_INVALID_PARAMETER; - } - - if ((*DataToggle != 1) && (*DataToggle != 0)) { - return EFI_INVALID_PARAMETER; - } - - if ((PollingInterval > 255) || (PollingInterval < 1)) { - return EFI_INVALID_PARAMETER; - } - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - - // - // Delete Async interrupt transfer request. - // - if (!IsNewTransfer) { - // - // The delete request may happen after device is detached. - // - for (Index = 0; Index < 255; Index++) { - if (Xhc->UsbDevContext[Index + 1].BusDevAddr == DeviceAddress) { - break; - } - } - - if (Index == 255) { - Status = EFI_INVALID_PARAMETER; - goto ON_EXIT; - } - - Status = XhciDelAsyncIntTransfer (Xhc, DeviceAddress, EndPointAddress); - DEBUG ((EFI_D_INFO, "XhcAsyncInterruptTransfer: remove old transfer for addr %d, Status = %r\n", DeviceAddress, Status)); - goto ON_EXIT; - } - - Status = EFI_SUCCESS; - - if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) { - DEBUG ((EFI_D_ERROR, "XhcAsyncInterruptTransfer: HC is halt\n")); - Status = EFI_DEVICE_ERROR; - goto ON_EXIT; - } - - // - // Check if the device is still enabled before every transaction. - // - SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress); - if (SlotId == 0) { - goto ON_EXIT; - } - - Data = AllocateZeroPool (DataLength); - - if (Data == NULL) { - DEBUG ((EFI_D_ERROR, "XhcAsyncInterruptTransfer: failed to allocate buffer\n")); - Status = EFI_OUT_OF_RESOURCES; - goto ON_EXIT; - } - - Urb = XhcCreateUrb ( - Xhc, - DeviceAddress, - EndPointAddress, - DeviceSpeed, - MaximumPacketLength, - XHC_INT_TRANSFER_ASYNC, - NULL, - Data, - DataLength, - CallBackFunction, - Context - ); - - if (Urb == NULL) { - DEBUG ((EFI_D_ERROR, "XhcAsyncInterruptTransfer: failed to create URB\n")); - FreePool (Data); - Status = EFI_OUT_OF_RESOURCES; - goto ON_EXIT; - } - - InsertHeadList (&Xhc->AsyncIntTransfers, &Urb->UrbList); - // - // Ring the doorbell - // - Status = RingIntTransferDoorBell (Xhc, Urb); - -ON_EXIT: - Xhc->PciIo->Flush (Xhc->PciIo); - gBS->RestoreTPL (OldTpl); - - return Status; -} - - -/** - Submits synchronous interrupt transfer to an interrupt endpoint - of a USB device. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param DeviceAddress Target device address. - @param EndPointAddress Endpoint number and its direction encoded in bit 7 - @param DeviceSpeed Indicates device speed. - @param MaximumPacketLength Maximum packet size the target endpoint is capable - of sending or receiving. - @param Data Buffer of data that will be transmitted to USB - device or received from USB device. - @param DataLength On input, the size, in bytes, of the data buffer; On - output, the number of bytes transferred. - @param DataToggle On input, the initial data toggle to use; on output, - it is updated to indicate the next data toggle. - @param Timeout Maximum time, in second, to complete. - @param Translator Transaction translator to use. - @param TransferResult Variable to receive the transfer result. - - @return EFI_SUCCESS The transfer was completed successfully. - @return EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource. - @return EFI_INVALID_PARAMETER Some parameters are invalid. - @return EFI_TIMEOUT The transfer failed due to timeout. - @return EFI_DEVICE_ERROR The failed due to host controller or device error - -**/ -EFI_STATUS -EFIAPI -XhcSyncInterruptTransfer ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 DeviceAddress, - IN UINT8 EndPointAddress, - IN UINT8 DeviceSpeed, - IN UINTN MaximumPacketLength, - IN OUT VOID *Data, - IN OUT UINTN *DataLength, - IN OUT UINT8 *DataToggle, - IN UINTN Timeout, - IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator, - OUT UINT32 *TransferResult - ) -{ - USB_XHCI_INSTANCE *Xhc; - URB *Urb; - UINT8 SlotId; - EFI_STATUS Status; - EFI_STATUS RecoveryStatus; - EFI_TPL OldTpl; - - // - // Validates parameters - // - if ((DataLength == NULL) || (*DataLength == 0) || - (Data == NULL) || (TransferResult == NULL)) { - return EFI_INVALID_PARAMETER; - } - - if (!XHCI_IS_DATAIN (EndPointAddress)) { - return EFI_INVALID_PARAMETER; - } - - if ((*DataToggle != 1) && (*DataToggle != 0)) { - return EFI_INVALID_PARAMETER; - } - - if (((DeviceSpeed == EFI_USB_SPEED_LOW) && (MaximumPacketLength != 8)) || - ((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) || - ((DeviceSpeed == EFI_USB_SPEED_HIGH) && (MaximumPacketLength > 3072))) { - return EFI_INVALID_PARAMETER; - } - - OldTpl = gBS->RaiseTPL (XHC_TPL); - - Xhc = XHC_FROM_THIS (This); - - *TransferResult = EFI_USB_ERR_SYSTEM; - Status = EFI_DEVICE_ERROR; - - if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) { - DEBUG ((EFI_D_ERROR, "EhcSyncInterruptTransfer: HC is halt\n")); - goto ON_EXIT; - } - - // - // Check if the device is still enabled before every transaction. - // - SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress); - if (SlotId == 0) { - goto ON_EXIT; - } - - Urb = XhcCreateUrb ( - Xhc, - DeviceAddress, - EndPointAddress, - DeviceSpeed, - MaximumPacketLength, - XHC_INT_TRANSFER_SYNC, - NULL, - Data, - *DataLength, - NULL, - NULL - ); - - if (Urb == NULL) { - DEBUG ((EFI_D_ERROR, "XhcSyncInterruptTransfer: failed to create URB\n")); - Status = EFI_OUT_OF_RESOURCES; - goto ON_EXIT; - } - - Status = XhcExecTransfer (Xhc, FALSE, Urb, Timeout); - - *TransferResult = Urb->Result; - *DataLength = Urb->Completed; - - if (*TransferResult == EFI_USB_NOERROR) { - Status = EFI_SUCCESS; - } else if (*TransferResult == EFI_USB_ERR_STALL) { - RecoveryStatus = XhcRecoverHaltedEndpoint(Xhc, Urb); - if (EFI_ERROR (RecoveryStatus)) { - DEBUG ((EFI_D_ERROR, "XhcSyncInterruptTransfer: XhcRecoverHaltedEndpoint failed\n")); - } - Status = EFI_DEVICE_ERROR; - } - - Xhc->PciIo->Flush (Xhc->PciIo); - XhcFreeUrb (Xhc, Urb); - -ON_EXIT: - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "XhcSyncInterruptTransfer: error - %r, transfer - %x\n", Status, *TransferResult)); - } - gBS->RestoreTPL (OldTpl); - - return Status; -} - - -/** - Submits isochronous transfer to a target USB device. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param DeviceAddress Target device address. - @param EndPointAddress End point address with its direction. - @param DeviceSpeed Device speed, Low speed device doesn't support this - type. - @param MaximumPacketLength Maximum packet size that the endpoint is capable of - sending or receiving. - @param DataBuffersNumber Number of data buffers prepared for the transfer. - @param Data Array of pointers to the buffers of data that will - be transmitted to USB device or received from USB - device. - @param DataLength The size, in bytes, of the data buffer. - @param Translator Transaction translator to use. - @param TransferResult Variable to receive the transfer result. - - @return EFI_UNSUPPORTED Isochronous transfer is unsupported. - -**/ -EFI_STATUS -EFIAPI -XhcIsochronousTransfer ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 DeviceAddress, - IN UINT8 EndPointAddress, - IN UINT8 DeviceSpeed, - IN UINTN MaximumPacketLength, - IN UINT8 DataBuffersNumber, - IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM], - IN UINTN DataLength, - IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator, - OUT UINT32 *TransferResult - ) -{ - return EFI_UNSUPPORTED; -} - - -/** - Submits Async isochronous transfer to a target USB device. - - @param This This EFI_USB2_HC_PROTOCOL instance. - @param DeviceAddress Target device address. - @param EndPointAddress End point address with its direction. - @param DeviceSpeed Device speed, Low speed device doesn't support this - type. - @param MaximumPacketLength Maximum packet size that the endpoint is capable of - sending or receiving. - @param DataBuffersNumber Number of data buffers prepared for the transfer. - @param Data Array of pointers to the buffers of data that will - be transmitted to USB device or received from USB - device. - @param DataLength The size, in bytes, of the data buffer. - @param Translator Transaction translator to use. - @param IsochronousCallBack Function to be called when the transfer complete. - @param Context Context passed to the call back function as - parameter. - - @return EFI_UNSUPPORTED Isochronous transfer isn't supported. - -**/ -EFI_STATUS -EFIAPI -XhcAsyncIsochronousTransfer ( - IN EFI_USB2_HC_PROTOCOL *This, - IN UINT8 DeviceAddress, - IN UINT8 EndPointAddress, - IN UINT8 DeviceSpeed, - IN UINTN MaximumPacketLength, - IN UINT8 DataBuffersNumber, - IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM], - IN UINTN DataLength, - IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator, - IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack, - IN VOID *Context - ) -{ - return EFI_UNSUPPORTED; -} - -/** - Entry point for EFI drivers. - - @param ImageHandle EFI_HANDLE. - @param SystemTable EFI_SYSTEM_TABLE. - - @retval EFI_SUCCESS Success. - @retval Others Fail. - -**/ -EFI_STATUS -EFIAPI -XhcDriverEntryPoint ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - return EfiLibInstallDriverBindingComponentName2 ( - ImageHandle, - SystemTable, - &gXhciDriverBinding, - ImageHandle, - &gXhciComponentName, - &gXhciComponentName2 - ); -} - - -/** - Test to see if this driver supports ControllerHandle. Any - ControllerHandle that has Usb2HcProtocol installed will - be supported. - - @param This Protocol instance pointer. - @param Controller Handle of device to test. - @param RemainingDevicePath Not used. - - @return EFI_SUCCESS This driver supports this device. - @return EFI_UNSUPPORTED This driver does not support this device. - -**/ -EFI_STATUS -EFIAPI -XhcDriverBindingSupported ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath - ) -{ - EFI_STATUS Status; - EFI_PCI_IO_PROTOCOL *PciIo; - USB_CLASSC UsbClassCReg; - - // - // Test whether there is PCI IO Protocol attached on the controller handle. - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - (VOID **) &PciIo, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_BY_DRIVER - ); - - if (EFI_ERROR (Status)) { - return EFI_UNSUPPORTED; - } - - Status = PciIo->Pci.Read ( - PciIo, - EfiPciIoWidthUint8, - PCI_CLASSCODE_OFFSET, - sizeof (USB_CLASSC) / sizeof (UINT8), - &UsbClassCReg - ); - - if (EFI_ERROR (Status)) { - Status = EFI_UNSUPPORTED; - goto ON_EXIT; - } - - // - // Test whether the controller belongs to Xhci type - // - if ((UsbClassCReg.BaseCode != PCI_CLASS_SERIAL) || - (UsbClassCReg.SubClassCode != PCI_CLASS_SERIAL_USB) || - (UsbClassCReg.ProgInterface != PCI_IF_XHCI)) { - Status = EFI_UNSUPPORTED; - } - -ON_EXIT: - gBS->CloseProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - return Status; -} - -/** - Create and initialize a USB_XHCI_INSTANCE structure. - - @param PciIo The PciIo on this device. - @param DevicePath The device path of host controller. - @param OriginalPciAttributes Original PCI attributes. - - @return The allocated and initialized USB_XHCI_INSTANCE structure if created, - otherwise NULL. - -**/ -USB_XHCI_INSTANCE* -XhcCreateUsbHc ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, - IN UINT64 OriginalPciAttributes - ) -{ - USB_XHCI_INSTANCE *Xhc; - EFI_STATUS Status; - UINT32 PageSize; - UINT16 ExtCapReg; - - Xhc = AllocateZeroPool (sizeof (USB_XHCI_INSTANCE)); - - if (Xhc == NULL) { - return NULL; - } - - // - // Initialize private data structure - // - Xhc->Signature = XHCI_INSTANCE_SIG; - Xhc->PciIo = PciIo; - Xhc->DevicePath = DevicePath; - Xhc->OriginalPciAttributes = OriginalPciAttributes; - CopyMem (&Xhc->Usb2Hc, &gXhciUsb2HcTemplate, sizeof (EFI_USB2_HC_PROTOCOL)); - - InitializeListHead (&Xhc->AsyncIntTransfers); - - // - // Be caution that the Offset passed to XhcReadCapReg() should be Dword align - // - Xhc->CapLength = XhcReadCapReg8 (Xhc, XHC_CAPLENGTH_OFFSET); - Xhc->HcSParams1.Dword = XhcReadCapReg (Xhc, XHC_HCSPARAMS1_OFFSET); - Xhc->HcSParams2.Dword = XhcReadCapReg (Xhc, XHC_HCSPARAMS2_OFFSET); - Xhc->HcCParams.Dword = XhcReadCapReg (Xhc, XHC_HCCPARAMS_OFFSET); - Xhc->DBOff = XhcReadCapReg (Xhc, XHC_DBOFF_OFFSET); - Xhc->RTSOff = XhcReadCapReg (Xhc, XHC_RTSOFF_OFFSET); - - // - // This PageSize field defines the page size supported by the xHC implementation. - // This xHC supports a page size of 2^(n+12) if bit n is Set. For example, - // if bit 0 is Set, the xHC supports 4k byte page sizes. - // - PageSize = XhcReadOpReg(Xhc, XHC_PAGESIZE_OFFSET) & XHC_PAGESIZE_MASK; - Xhc->PageSize = 1 << (HighBitSet32(PageSize) + 12); - - ExtCapReg = (UINT16) (Xhc->HcCParams.Data.ExtCapReg); - Xhc->ExtCapRegBase = ExtCapReg << 2; - Xhc->UsbLegSupOffset = XhcGetCapabilityAddr (Xhc, XHC_CAP_USB_LEGACY); - Xhc->DebugCapSupOffset = XhcGetCapabilityAddr (Xhc, XHC_CAP_USB_DEBUG); - - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: Capability length 0x%x\n", Xhc->CapLength)); - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: HcSParams1 0x%x\n", Xhc->HcSParams1)); - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: HcSParams2 0x%x\n", Xhc->HcSParams2)); - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: HcCParams 0x%x\n", Xhc->HcCParams)); - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: DBOff 0x%x\n", Xhc->DBOff)); - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: RTSOff 0x%x\n", Xhc->RTSOff)); - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: UsbLegSupOffset 0x%x\n", Xhc->UsbLegSupOffset)); - DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: DebugCapSupOffset 0x%x\n", Xhc->DebugCapSupOffset)); - - // - // Create AsyncRequest Polling Timer - // - Status = gBS->CreateEvent ( - EVT_TIMER | EVT_NOTIFY_SIGNAL, - TPL_CALLBACK, - XhcMonitorAsyncRequests, - Xhc, - &Xhc->PollTimer - ); - - if (EFI_ERROR (Status)) { - goto ON_ERROR; - } - - return Xhc; - -ON_ERROR: - FreePool (Xhc); - return NULL; -} - -/** - One notified function to stop the Host Controller when gBS->ExitBootServices() called. - - @param Event Pointer to this event - @param Context Event hanlder private data - -**/ -VOID -EFIAPI -XhcExitBootService ( - EFI_EVENT Event, - VOID *Context - ) - -{ - USB_XHCI_INSTANCE *Xhc; - EFI_PCI_IO_PROTOCOL *PciIo; - - Xhc = (USB_XHCI_INSTANCE*) Context; - PciIo = Xhc->PciIo; - - // - // Stop AsyncRequest Polling timer then stop the XHCI driver - // and uninstall the XHCI protocl. - // - gBS->SetTimer (Xhc->PollTimer, TimerCancel, 0); - XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT); - - if (Xhc->PollTimer != NULL) { - gBS->CloseEvent (Xhc->PollTimer); - } - - XhcClearBiosOwnership (Xhc); - - // - // Restore original PCI attributes - // - PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationSet, - Xhc->OriginalPciAttributes, - NULL - ); -} - -/** - Starting the Usb XHCI Driver. - - @param This Protocol instance pointer. - @param Controller Handle of device to test. - @param RemainingDevicePath Not used. - - @return EFI_SUCCESS supports this device. - @return EFI_UNSUPPORTED do not support this device. - @return EFI_DEVICE_ERROR cannot be started due to device Error. - @return EFI_OUT_OF_RESOURCES cannot allocate resources. - -**/ -EFI_STATUS -EFIAPI -XhcDriverBindingStart ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath - ) -{ - EFI_STATUS Status; - EFI_PCI_IO_PROTOCOL *PciIo; - UINT64 Supports; - UINT64 OriginalPciAttributes; - BOOLEAN PciAttributesSaved; - USB_XHCI_INSTANCE *Xhc; - EFI_DEVICE_PATH_PROTOCOL *HcDevicePath; - - // - // Open the PciIo Protocol, then enable the USB host controller - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - (VOID **) &PciIo, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_BY_DRIVER - ); - - if (EFI_ERROR (Status)) { - return Status; - } - - // - // Open Device Path Protocol for on USB host controller - // - HcDevicePath = NULL; - Status = gBS->OpenProtocol ( - Controller, - &gEfiDevicePathProtocolGuid, - (VOID **) &HcDevicePath, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_GET_PROTOCOL - ); - - PciAttributesSaved = FALSE; - // - // Save original PCI attributes - // - Status = PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationGet, - 0, - &OriginalPciAttributes - ); - - if (EFI_ERROR (Status)) { - goto CLOSE_PCIIO; - } - PciAttributesSaved = TRUE; - - Status = PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationSupported, - 0, - &Supports - ); - if (!EFI_ERROR (Status)) { - Supports &= EFI_PCI_DEVICE_ENABLE; - Status = PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationEnable, - Supports, - NULL - ); - } - - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to enable controller\n")); - goto CLOSE_PCIIO; - } - - // - // Create then install USB2_HC_PROTOCOL - // - Xhc = XhcCreateUsbHc (PciIo, HcDevicePath, OriginalPciAttributes); - - if (Xhc == NULL) { - DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to create USB2_HC\n")); - return EFI_OUT_OF_RESOURCES; - } - - XhcSetBiosOwnership (Xhc); - - XhcResetHC (Xhc, XHC_RESET_TIMEOUT); - ASSERT (XhcIsHalt (Xhc)); - - // - // After Chip Hardware Reset wait until the Controller Not Ready (CNR) flag - // in the USBSTS is '0' before writing any xHC Operational or Runtime registers. - // - ASSERT (!(XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_CNR))); - - // - // Initialize the schedule - // - XhcInitSched (Xhc); - - // - // Start the Host Controller - // - XhcRunHC(Xhc, XHC_GENERIC_TIMEOUT); - - // - // Start the asynchronous interrupt monitor - // - Status = gBS->SetTimer (Xhc->PollTimer, TimerPeriodic, XHC_ASYNC_TIMER_INTERVAL); - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to start async interrupt monitor\n")); - XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT); - goto FREE_POOL; - } - - // - // Create event to stop the HC when exit boot service. - // - Status = gBS->CreateEventEx ( - EVT_NOTIFY_SIGNAL, - TPL_NOTIFY, - XhcExitBootService, - Xhc, - &gEfiEventExitBootServicesGuid, - &Xhc->ExitBootServiceEvent - ); - if (EFI_ERROR (Status)) { - goto FREE_POOL; - } - - // - // Install the component name protocol, don't fail the start - // because of something for display. - // - AddUnicodeString2 ( - "eng", - gXhciComponentName.SupportedLanguages, - &Xhc->ControllerNameTable, - L"eXtensible Host Controller (USB 3.0)", - TRUE - ); - AddUnicodeString2 ( - "en", - gXhciComponentName2.SupportedLanguages, - &Xhc->ControllerNameTable, - L"eXtensible Host Controller (USB 3.0)", - FALSE - ); - - Status = gBS->InstallProtocolInterface ( - &Controller, - &gEfiUsb2HcProtocolGuid, - EFI_NATIVE_INTERFACE, - &Xhc->Usb2Hc - ); - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to install USB2_HC Protocol\n")); - goto FREE_POOL; - } - - DEBUG ((EFI_D_INFO, "XhcDriverBindingStart: XHCI started for controller @ %x\n", Controller)); - return EFI_SUCCESS; - -FREE_POOL: - gBS->CloseEvent (Xhc->PollTimer); - XhcFreeSched (Xhc); - FreePool (Xhc); - -CLOSE_PCIIO: - if (PciAttributesSaved) { - // - // Restore original PCI attributes - // - PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationSet, - OriginalPciAttributes, - NULL - ); - } - - gBS->CloseProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - return Status; -} - - -/** - Stop this driver on ControllerHandle. Support stoping any child handles - created by this driver. - - @param This Protocol instance pointer. - @param Controller Handle of device to stop driver on. - @param NumberOfChildren Number of Children in the ChildHandleBuffer. - @param ChildHandleBuffer List of handles for the children we need to stop. - - @return EFI_SUCCESS Success. - @return EFI_DEVICE_ERROR Fail. - -**/ -EFI_STATUS -EFIAPI -XhcDriverBindingStop ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN UINTN NumberOfChildren, - IN EFI_HANDLE *ChildHandleBuffer - ) -{ - EFI_STATUS Status; - EFI_USB2_HC_PROTOCOL *Usb2Hc; - EFI_PCI_IO_PROTOCOL *PciIo; - USB_XHCI_INSTANCE *Xhc; - UINT8 Index; - - // - // Test whether the Controller handler passed in is a valid - // Usb controller handle that should be supported, if not, - // return the error status directly - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiUsb2HcProtocolGuid, - (VOID **) &Usb2Hc, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_GET_PROTOCOL - ); - - if (EFI_ERROR (Status)) { - return Status; - } - - Status = gBS->UninstallProtocolInterface ( - Controller, - &gEfiUsb2HcProtocolGuid, - Usb2Hc - ); - - if (EFI_ERROR (Status)) { - return Status; - } - - Xhc = XHC_FROM_THIS (Usb2Hc); - PciIo = Xhc->PciIo; - - // - // Stop AsyncRequest Polling timer then stop the XHCI driver - // and uninstall the XHCI protocl. - // - gBS->SetTimer (Xhc->PollTimer, TimerCancel, 0); - - // - // Disable the device slots occupied by these devices on its downstream ports. - // Entry 0 is reserved. - // - for (Index = 0; Index < 255; Index++) { - if (!Xhc->UsbDevContext[Index + 1].Enabled || - (Xhc->UsbDevContext[Index + 1].SlotId == 0)) { - continue; - } - if (Xhc->HcCParams.Data.Csz == 0) { - XhcDisableSlotCmd (Xhc, Xhc->UsbDevContext[Index + 1].SlotId); - } else { - XhcDisableSlotCmd64 (Xhc, Xhc->UsbDevContext[Index + 1].SlotId); - } - } - - if (Xhc->PollTimer != NULL) { - gBS->CloseEvent (Xhc->PollTimer); - } - - if (Xhc->ExitBootServiceEvent != NULL) { - gBS->CloseEvent (Xhc->ExitBootServiceEvent); - } - - XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT); - XhcClearBiosOwnership (Xhc); - XhciDelAllAsyncIntTransfers (Xhc); - XhcFreeSched (Xhc); - - if (Xhc->ControllerNameTable) { - FreeUnicodeStringTable (Xhc->ControllerNameTable); - } - - // - // Restore original PCI attributes - // - PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationSet, - Xhc->OriginalPciAttributes, - NULL - ); - - gBS->CloseProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - FreePool (Xhc); - - return EFI_SUCCESS; -} - +/** @file
+ The XHCI controller driver.
+
+Copyright (c) 2011 - 2013, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "Xhci.h"
+
+//
+// Two arrays used to translate the XHCI port state (change)
+// to the UEFI protocol's port state (change).
+//
+USB_PORT_STATE_MAP mUsbPortStateMap[] = {
+ {XHC_PORTSC_CCS, USB_PORT_STAT_CONNECTION},
+ {XHC_PORTSC_PED, USB_PORT_STAT_ENABLE},
+ {XHC_PORTSC_OCA, USB_PORT_STAT_OVERCURRENT},
+ {XHC_PORTSC_RESET, USB_PORT_STAT_RESET}
+};
+
+USB_PORT_STATE_MAP mUsbPortChangeMap[] = {
+ {XHC_PORTSC_CSC, USB_PORT_STAT_C_CONNECTION},
+ {XHC_PORTSC_PEC, USB_PORT_STAT_C_ENABLE},
+ {XHC_PORTSC_OCC, USB_PORT_STAT_C_OVERCURRENT},
+ {XHC_PORTSC_PRC, USB_PORT_STAT_C_RESET}
+};
+
+USB_CLEAR_PORT_MAP mUsbClearPortChangeMap[] = {
+ {XHC_PORTSC_CSC, EfiUsbPortConnectChange},
+ {XHC_PORTSC_PEC, EfiUsbPortEnableChange},
+ {XHC_PORTSC_OCC, EfiUsbPortOverCurrentChange},
+ {XHC_PORTSC_PRC, EfiUsbPortResetChange}
+};
+
+USB_PORT_STATE_MAP mUsbHubPortStateMap[] = {
+ {XHC_HUB_PORTSC_CCS, USB_PORT_STAT_CONNECTION},
+ {XHC_HUB_PORTSC_PED, USB_PORT_STAT_ENABLE},
+ {XHC_HUB_PORTSC_OCA, USB_PORT_STAT_OVERCURRENT},
+ {XHC_HUB_PORTSC_RESET, USB_PORT_STAT_RESET}
+};
+
+USB_PORT_STATE_MAP mUsbHubPortChangeMap[] = {
+ {XHC_HUB_PORTSC_CSC, USB_PORT_STAT_C_CONNECTION},
+ {XHC_HUB_PORTSC_PEC, USB_PORT_STAT_C_ENABLE},
+ {XHC_HUB_PORTSC_OCC, USB_PORT_STAT_C_OVERCURRENT},
+ {XHC_HUB_PORTSC_PRC, USB_PORT_STAT_C_RESET}
+};
+
+USB_CLEAR_PORT_MAP mUsbHubClearPortChangeMap[] = {
+ {XHC_HUB_PORTSC_CSC, EfiUsbPortConnectChange},
+ {XHC_HUB_PORTSC_PEC, EfiUsbPortEnableChange},
+ {XHC_HUB_PORTSC_OCC, EfiUsbPortOverCurrentChange},
+ {XHC_HUB_PORTSC_PRC, EfiUsbPortResetChange},
+ {XHC_HUB_PORTSC_BHRC, Usb3PortBHPortResetChange}
+};
+
+EFI_DRIVER_BINDING_PROTOCOL gXhciDriverBinding = {
+ XhcDriverBindingSupported,
+ XhcDriverBindingStart,
+ XhcDriverBindingStop,
+ 0x30,
+ NULL,
+ NULL
+};
+
+//
+// Template for Xhci's Usb2 Host Controller Protocol Instance.
+//
+EFI_USB2_HC_PROTOCOL gXhciUsb2HcTemplate = {
+ XhcGetCapability,
+ XhcReset,
+ XhcGetState,
+ XhcSetState,
+ XhcControlTransfer,
+ XhcBulkTransfer,
+ XhcAsyncInterruptTransfer,
+ XhcSyncInterruptTransfer,
+ XhcIsochronousTransfer,
+ XhcAsyncIsochronousTransfer,
+ XhcGetRootHubPortStatus,
+ XhcSetRootHubPortFeature,
+ XhcClearRootHubPortFeature,
+ 0x3,
+ 0x0
+};
+
+/**
+ Retrieves the capability of root hub ports.
+
+ @param This The EFI_USB2_HC_PROTOCOL instance.
+ @param MaxSpeed Max speed supported by the controller.
+ @param PortNumber Number of the root hub ports.
+ @param Is64BitCapable Whether the controller supports 64-bit memory
+ addressing.
+
+ @retval EFI_SUCCESS Host controller capability were retrieved successfully.
+ @retval EFI_INVALID_PARAMETER Either of the three capability pointer is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcGetCapability (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ OUT UINT8 *MaxSpeed,
+ OUT UINT8 *PortNumber,
+ OUT UINT8 *Is64BitCapable
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ EFI_TPL OldTpl;
+
+ if ((MaxSpeed == NULL) || (PortNumber == NULL) || (Is64BitCapable == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+ *MaxSpeed = EFI_USB_SPEED_SUPER;
+ *PortNumber = (UINT8) (Xhc->HcSParams1.Data.MaxPorts);
+ *Is64BitCapable = (UINT8) (Xhc->HcCParams.Data.Ac64);
+ DEBUG ((EFI_D_INFO, "XhcGetCapability: %d ports, 64 bit %d\n", *PortNumber, *Is64BitCapable));
+
+ gBS->RestoreTPL (OldTpl);
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Provides software reset for the USB host controller.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param Attributes A bit mask of the reset operation to perform.
+
+ @retval EFI_SUCCESS The reset operation succeeded.
+ @retval EFI_INVALID_PARAMETER Attributes is not valid.
+ @retval EFI_UNSUPPOURTED The type of reset specified by Attributes is
+ not currently supported by the host controller.
+ @retval EFI_DEVICE_ERROR Host controller isn't halted to reset.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcReset (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT16 Attributes
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ EFI_STATUS Status;
+ EFI_TPL OldTpl;
+
+ Xhc = XHC_FROM_THIS (This);
+
+ if (Xhc->DevicePath != NULL) {
+ //
+ // Report Status Code to indicate reset happens
+ //
+ REPORT_STATUS_CODE_WITH_DEVICE_PATH (
+ EFI_PROGRESS_CODE,
+ (EFI_IO_BUS_USB | EFI_IOB_PC_RESET),
+ Xhc->DevicePath
+ );
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ switch (Attributes) {
+ case EFI_USB_HC_RESET_GLOBAL:
+ //
+ // Flow through, same behavior as Host Controller Reset
+ //
+ case EFI_USB_HC_RESET_HOST_CONTROLLER:
+ if ((Xhc->DebugCapSupOffset != 0xFFFFFFFF) && ((XhcReadExtCapReg (Xhc, Xhc->DebugCapSupOffset) & 0xFF) == XHC_CAP_USB_DEBUG) &&
+ ((XhcReadExtCapReg (Xhc, Xhc->DebugCapSupOffset + XHC_DC_DCCTRL) & BIT0) != 0)) {
+ Status = EFI_SUCCESS;
+ goto ON_EXIT;
+ }
+ //
+ // Host Controller must be Halt when Reset it
+ //
+ if (!XhcIsHalt (Xhc)) {
+ Status = XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT);
+
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+ }
+
+ Status = XhcResetHC (Xhc, XHC_RESET_TIMEOUT);
+ ASSERT (!(XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_CNR)));
+
+ if (EFI_ERROR (Status)) {
+ goto ON_EXIT;
+ }
+ //
+ // Clean up the asynchronous transfers, currently only
+ // interrupt supports asynchronous operation.
+ //
+ XhciDelAllAsyncIntTransfers (Xhc);
+ XhcFreeSched (Xhc);
+
+ XhcInitSched (Xhc);
+ break;
+
+ case EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG:
+ case EFI_USB_HC_RESET_HOST_WITH_DEBUG:
+ Status = EFI_UNSUPPORTED;
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ }
+
+ON_EXIT:
+ DEBUG ((EFI_D_INFO, "XhcReset: status %r\n", Status));
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Retrieve the current state of the USB host controller.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param State Variable to return the current host controller
+ state.
+
+ @retval EFI_SUCCESS Host controller state was returned in State.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+ @retval EFI_DEVICE_ERROR An error was encountered while attempting to
+ retrieve the host controller's current state.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcGetState (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ OUT EFI_USB_HC_STATE *State
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ EFI_TPL OldTpl;
+
+ if (State == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+
+ if (XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HALT)) {
+ *State = EfiUsbHcStateHalt;
+ } else {
+ *State = EfiUsbHcStateOperational;
+ }
+
+ DEBUG ((EFI_D_INFO, "XhcGetState: current state %d\n", *State));
+ gBS->RestoreTPL (OldTpl);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Sets the USB host controller to a specific state.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param State The state of the host controller that will be set.
+
+ @retval EFI_SUCCESS The USB host controller was successfully placed
+ in the state specified by State.
+ @retval EFI_INVALID_PARAMETER State is invalid.
+ @retval EFI_DEVICE_ERROR Failed to set the state due to device error.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcSetState (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN EFI_USB_HC_STATE State
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ EFI_STATUS Status;
+ EFI_USB_HC_STATE CurState;
+ EFI_TPL OldTpl;
+
+ Status = XhcGetState (This, &CurState);
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (CurState == State) {
+ return EFI_SUCCESS;
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+
+ switch (State) {
+ case EfiUsbHcStateHalt:
+ Status = XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT);
+ break;
+
+ case EfiUsbHcStateOperational:
+ if (XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HSE)) {
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ //
+ // Software must not write a one to this field unless the host controller
+ // is in the Halted state. Doing so will yield undefined results.
+ // refers to Spec[XHCI1.0-2.3.1]
+ //
+ if (!XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HALT)) {
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ Status = XhcRunHC (Xhc, XHC_GENERIC_TIMEOUT);
+ break;
+
+ case EfiUsbHcStateSuspend:
+ Status = EFI_UNSUPPORTED;
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ }
+
+ DEBUG ((EFI_D_INFO, "XhcSetState: status %r\n", Status));
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+/**
+ Retrieves the current status of a USB root hub port.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param PortNumber The root hub port to retrieve the state from.
+ This value is zero-based.
+ @param PortStatus Variable to receive the port state.
+
+ @retval EFI_SUCCESS The status of the USB root hub port specified.
+ by PortNumber was returned in PortStatus.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid.
+ @retval EFI_DEVICE_ERROR Can't read register.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcGetRootHubPortStatus (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 PortNumber,
+ OUT EFI_USB_PORT_STATUS *PortStatus
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ UINT32 Offset;
+ UINT32 State;
+ UINT32 TotalPort;
+ UINTN Index;
+ UINTN MapSize;
+ EFI_STATUS Status;
+ USB_DEV_ROUTE ParentRouteChart;
+ EFI_TPL OldTpl;
+
+ if (PortStatus == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+ Status = EFI_SUCCESS;
+
+ TotalPort = Xhc->HcSParams1.Data.MaxPorts;
+
+ if (PortNumber >= TotalPort) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Offset = (UINT32) (XHC_PORTSC_OFFSET + (0x10 * PortNumber));
+ PortStatus->PortStatus = 0;
+ PortStatus->PortChangeStatus = 0;
+
+ State = XhcReadOpReg (Xhc, Offset);
+
+ //
+ // According to XHCI 1.0 spec, bit 10~13 of the root port status register identifies the speed of the attached device.
+ //
+ switch ((State & XHC_PORTSC_PS) >> 10) {
+ case 2:
+ PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
+ break;
+
+ case 3:
+ PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
+ break;
+
+ case 4:
+ PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
+ break;
+
+ default:
+ break;
+ }
+
+ //
+ // Convert the XHCI port/port change state to UEFI status
+ //
+ MapSize = sizeof (mUsbPortStateMap) / sizeof (USB_PORT_STATE_MAP);
+
+ for (Index = 0; Index < MapSize; Index++) {
+ if (XHC_BIT_IS_SET (State, mUsbPortStateMap[Index].HwState)) {
+ PortStatus->PortStatus = (UINT16) (PortStatus->PortStatus | mUsbPortStateMap[Index].UefiState);
+ }
+ }
+ //
+ // Bit5~8 reflects its current link state.
+ //
+ if ((State & XHC_PORTSC_PLS) >> 5 == 3) {
+ PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND;
+ }
+
+ MapSize = sizeof (mUsbPortChangeMap) / sizeof (USB_PORT_STATE_MAP);
+
+ for (Index = 0; Index < MapSize; Index++) {
+ if (XHC_BIT_IS_SET (State, mUsbPortChangeMap[Index].HwState)) {
+ PortStatus->PortChangeStatus = (UINT16) (PortStatus->PortChangeStatus | mUsbPortChangeMap[Index].UefiState);
+ }
+ }
+
+ MapSize = sizeof (mUsbClearPortChangeMap) / sizeof (USB_CLEAR_PORT_MAP);
+
+ for (Index = 0; Index < MapSize; Index++) {
+ if (XHC_BIT_IS_SET (State, mUsbClearPortChangeMap[Index].HwState)) {
+ XhcClearRootHubPortFeature (This, PortNumber, (EFI_USB_PORT_FEATURE)mUsbClearPortChangeMap[Index].Selector);
+ }
+ }
+
+ //
+ // Poll the root port status register to enable/disable corresponding device slot if there is a device attached/detached.
+ // For those devices behind hub, we get its attach/detach event by hooking Get_Port_Status request at control transfer for those hub.
+ //
+ ParentRouteChart.Dword = 0;
+ XhcPollPortStatusChange (Xhc, ParentRouteChart, PortNumber, PortStatus);
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+
+/**
+ Sets a feature for the specified root hub port.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param PortNumber Root hub port to set.
+ @param PortFeature Feature to set.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was set.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @retval EFI_DEVICE_ERROR Can't read register.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcSetRootHubPortFeature (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ UINT32 Offset;
+ UINT32 State;
+ UINT32 TotalPort;
+ EFI_STATUS Status;
+ EFI_TPL OldTpl;
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+ Status = EFI_SUCCESS;
+
+ TotalPort = (Xhc->HcSParams1.Data.MaxPorts);
+
+ if (PortNumber >= TotalPort) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Offset = (UINT32) (XHC_PORTSC_OFFSET + (0x10 * PortNumber));
+ State = XhcReadOpReg (Xhc, Offset);
+
+ //
+ // Mask off the port status change bits, these bits are
+ // write clean bit
+ //
+ State &= ~ (BIT1 | BIT17 | BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23);
+
+ switch (PortFeature) {
+ case EfiUsbPortEnable:
+ //
+ // Ports may only be enabled by the xHC. Software cannot enable a port by writing a '1' to this flag.
+ // A port may be disabled by software writing a '1' to this flag.
+ //
+ Status = EFI_SUCCESS;
+ break;
+
+ case EfiUsbPortSuspend:
+ State |= XHC_PORTSC_LWS;
+ XhcWriteOpReg (Xhc, Offset, State);
+ State &= ~XHC_PORTSC_PLS;
+ State |= (3 << 5) ;
+ XhcWriteOpReg (Xhc, Offset, State);
+ break;
+
+ case EfiUsbPortReset:
+ DEBUG ((EFI_D_INFO, "XhcUsbPortReset!\n"));
+ //
+ // Make sure Host Controller not halt before reset it
+ //
+ if (XhcIsHalt (Xhc)) {
+ Status = XhcRunHC (Xhc, XHC_GENERIC_TIMEOUT);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_INFO, "XhcSetRootHubPortFeature :failed to start HC - %r\n", Status));
+ break;
+ }
+ }
+
+ //
+ // 4.3.1 Resetting a Root Hub Port
+ // 1) Write the PORTSC register with the Port Reset (PR) bit set to '1'.
+ //
+ State |= XHC_PORTSC_RESET;
+ XhcWriteOpReg (Xhc, Offset, State);
+ XhcWaitOpRegBit(Xhc, Offset, XHC_PORTSC_PRC, TRUE, XHC_GENERIC_TIMEOUT);
+ break;
+
+ case EfiUsbPortPower:
+ //
+ // Not supported, ignore the operation
+ //
+ Status = EFI_SUCCESS;
+ break;
+
+ case EfiUsbPortOwner:
+ //
+ // XHCI root hub port don't has the owner bit, ignore the operation
+ //
+ Status = EFI_SUCCESS;
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ }
+
+ON_EXIT:
+ DEBUG ((EFI_D_INFO, "XhcSetRootHubPortFeature: status %r\n", Status));
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Clears a feature for the specified root hub port.
+
+ @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
+ @param PortNumber Specifies the root hub port whose feature is
+ requested to be cleared.
+ @param PortFeature Indicates the feature selector associated with the
+ feature clear request.
+
+ @retval EFI_SUCCESS The feature specified by PortFeature was cleared
+ for the USB root hub port specified by PortNumber.
+ @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+ @retval EFI_DEVICE_ERROR Can't read register.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcClearRootHubPortFeature (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 PortNumber,
+ IN EFI_USB_PORT_FEATURE PortFeature
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ UINT32 Offset;
+ UINT32 State;
+ UINT32 TotalPort;
+ EFI_STATUS Status;
+ EFI_TPL OldTpl;
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+ Status = EFI_SUCCESS;
+
+ TotalPort = (Xhc->HcSParams1.Data.MaxPorts);
+
+ if (PortNumber >= TotalPort) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Offset = XHC_PORTSC_OFFSET + (0x10 * PortNumber);
+
+ //
+ // Mask off the port status change bits, these bits are
+ // write clean bit
+ //
+ State = XhcReadOpReg (Xhc, Offset);
+ State &= ~ (BIT1 | BIT17 | BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23);
+
+ switch (PortFeature) {
+ case EfiUsbPortEnable:
+ //
+ // Ports may only be enabled by the xHC. Software cannot enable a port by writing a '1' to this flag.
+ // A port may be disabled by software writing a '1' to this flag.
+ //
+ State |= XHC_PORTSC_PED;
+ State &= ~XHC_PORTSC_RESET;
+ XhcWriteOpReg (Xhc, Offset, State);
+ break;
+
+ case EfiUsbPortSuspend:
+ State |= XHC_PORTSC_LWS;
+ XhcWriteOpReg (Xhc, Offset, State);
+ State &= ~XHC_PORTSC_PLS;
+ XhcWriteOpReg (Xhc, Offset, State);
+ break;
+
+ case EfiUsbPortReset:
+ //
+ // PORTSC_RESET BIT(4) bit is RW1S attribute, which means Write-1-to-set status:
+ // Register bits indicate status when read, a clear bit may be set by
+ // writing a '1'. Writing a '0' to RW1S bits has no effect.
+ //
+ break;
+
+ case EfiUsbPortOwner:
+ //
+ // XHCI root hub port don't has the owner bit, ignore the operation
+ //
+ break;
+
+ case EfiUsbPortConnectChange:
+ //
+ // Clear connect status change
+ //
+ State |= XHC_PORTSC_CSC;
+ XhcWriteOpReg (Xhc, Offset, State);
+ break;
+
+ case EfiUsbPortEnableChange:
+ //
+ // Clear enable status change
+ //
+ State |= XHC_PORTSC_PEC;
+ XhcWriteOpReg (Xhc, Offset, State);
+ break;
+
+ case EfiUsbPortOverCurrentChange:
+ //
+ // Clear PortOverCurrent change
+ //
+ State |= XHC_PORTSC_OCC;
+ XhcWriteOpReg (Xhc, Offset, State);
+ break;
+
+ case EfiUsbPortResetChange:
+ //
+ // Clear Port Reset change
+ //
+ State |= XHC_PORTSC_PRC;
+ XhcWriteOpReg (Xhc, Offset, State);
+ break;
+
+ case EfiUsbPortPower:
+ case EfiUsbPortSuspendChange:
+ //
+ // Not supported or not related operation
+ //
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ON_EXIT:
+ DEBUG ((EFI_D_INFO, "XhcClearRootHubPortFeature: status %r\n", Status));
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Submits control transfer to a target USB device.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param DeviceAddress The target device address.
+ @param DeviceSpeed Target device speed.
+ @param MaximumPacketLength Maximum packet size the default control transfer
+ endpoint is capable of sending or receiving.
+ @param Request USB device request to send.
+ @param TransferDirection Specifies the data direction for the data stage
+ @param Data Data buffer to be transmitted or received from USB
+ device.
+ @param DataLength The size (in bytes) of the data buffer.
+ @param Timeout Indicates the maximum timeout, in millisecond.
+ @param Translator Transaction translator to be used by this device.
+ @param TransferResult Return the result of this control transfer.
+
+ @retval EFI_SUCCESS Transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT Transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcControlTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN EFI_USB_DEVICE_REQUEST *Request,
+ IN EFI_USB_DATA_DIRECTION TransferDirection,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN UINTN Timeout,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ URB *Urb;
+ UINT8 Endpoint;
+ UINT8 Index;
+ UINT8 DescriptorType;
+ UINT8 SlotId;
+ UINT8 TTT;
+ UINT8 MTT;
+ UINT32 MaxPacket0;
+ EFI_USB_HUB_DESCRIPTOR *HubDesc;
+ EFI_TPL OldTpl;
+ EFI_STATUS Status;
+ EFI_STATUS RecoveryStatus;
+ UINTN MapSize;
+ EFI_USB_PORT_STATUS PortStatus;
+ UINT32 State;
+ EFI_USB_DEVICE_REQUEST ClearPortRequest;
+ UINTN Len;
+
+ //
+ // Validate parameters
+ //
+ if ((Request == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection != EfiUsbDataIn) &&
+ (TransferDirection != EfiUsbDataOut) &&
+ (TransferDirection != EfiUsbNoData)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection == EfiUsbNoData) &&
+ ((Data != NULL) || (*DataLength != 0))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((TransferDirection != EfiUsbNoData) &&
+ ((Data == NULL) || (*DataLength == 0))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((MaximumPacketLength != 8) && (MaximumPacketLength != 16) &&
+ (MaximumPacketLength != 32) && (MaximumPacketLength != 64) &&
+ (MaximumPacketLength != 512)
+ ) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((DeviceSpeed == EFI_USB_SPEED_LOW) && (MaximumPacketLength != 8)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((DeviceSpeed == EFI_USB_SPEED_SUPER) && (MaximumPacketLength != 512)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+
+ Status = EFI_DEVICE_ERROR;
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ Len = 0;
+
+ if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) {
+ DEBUG ((EFI_D_ERROR, "XhcControlTransfer: HC halted at entrance\n"));
+ goto ON_EXIT;
+ }
+
+ //
+ // Check if the device is still enabled before every transaction.
+ //
+ SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress);
+ if (SlotId == 0) {
+ goto ON_EXIT;
+ }
+
+ //
+ // Hook the Set_Address request from UsbBus.
+ // According to XHCI 1.0 spec, the Set_Address request is replaced by XHCI's Address_Device cmd.
+ //
+ if ((Request->Request == USB_REQ_SET_ADDRESS) &&
+ (Request->RequestType == USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE))) {
+ //
+ // Reset the BusDevAddr field of all disabled entries in UsbDevContext array firstly.
+ // This way is used to clean the history to avoid using wrong device address by XhcAsyncInterruptTransfer().
+ //
+ for (Index = 0; Index < 255; Index++) {
+ if (!Xhc->UsbDevContext[Index + 1].Enabled &&
+ (Xhc->UsbDevContext[Index + 1].SlotId == 0) &&
+ (Xhc->UsbDevContext[Index + 1].BusDevAddr == (UINT8)Request->Value)) {
+ Xhc->UsbDevContext[Index + 1].BusDevAddr = 0;
+ }
+ }
+
+ if (Xhc->UsbDevContext[SlotId].XhciDevAddr == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+ //
+ // The actual device address has been assigned by XHCI during initializing the device slot.
+ // So we just need establish the mapping relationship between the device address requested from UsbBus
+ // and the actual device address assigned by XHCI. The the following invocations through EFI_USB2_HC_PROTOCOL interface
+ // can find out the actual device address by it.
+ //
+ Xhc->UsbDevContext[SlotId].BusDevAddr = (UINT8)Request->Value;
+ Status = EFI_SUCCESS;
+ goto ON_EXIT;
+ }
+
+ //
+ // Create a new URB, insert it into the asynchronous
+ // schedule list, then poll the execution status.
+ // Note that we encode the direction in address although default control
+ // endpoint is bidirectional. XhcCreateUrb expects this
+ // combination of Ep addr and its direction.
+ //
+ Endpoint = (UINT8) (0 | ((TransferDirection == EfiUsbDataIn) ? 0x80 : 0));
+ Urb = XhcCreateUrb (
+ Xhc,
+ DeviceAddress,
+ Endpoint,
+ DeviceSpeed,
+ MaximumPacketLength,
+ XHC_CTRL_TRANSFER,
+ Request,
+ Data,
+ *DataLength,
+ NULL,
+ NULL
+ );
+
+ if (Urb == NULL) {
+ DEBUG ((EFI_D_ERROR, "XhcControlTransfer: failed to create URB"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ Status = XhcExecTransfer (Xhc, FALSE, Urb, Timeout);
+
+ //
+ // Get the status from URB. The result is updated in XhcCheckUrbResult
+ // which is called by XhcExecTransfer
+ //
+ *TransferResult = Urb->Result;
+ *DataLength = Urb->Completed;
+
+ if (*TransferResult == EFI_USB_NOERROR) {
+ Status = EFI_SUCCESS;
+ } else if (*TransferResult == EFI_USB_ERR_STALL) {
+ RecoveryStatus = XhcRecoverHaltedEndpoint(Xhc, Urb);
+ if (EFI_ERROR (RecoveryStatus)) {
+ DEBUG ((EFI_D_ERROR, "XhcControlTransfer: XhcRecoverHaltedEndpoint failed\n"));
+ }
+ Status = EFI_DEVICE_ERROR;
+ goto FREE_URB;
+ } else {
+ goto FREE_URB;
+ }
+
+ Xhc->PciIo->Flush (Xhc->PciIo);
+
+ if (Urb->DataMap != NULL) {
+ Status = Xhc->PciIo->Unmap (Xhc->PciIo, Urb->DataMap);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto FREE_URB;
+ }
+ }
+
+ //
+ // Hook Get_Descriptor request from UsbBus as we need evaluate context and configure endpoint.
+ // Hook Get_Status request form UsbBus as we need trace device attach/detach event happened at hub.
+ // Hook Set_Config request from UsbBus as we need configure device endpoint.
+ //
+ if ((Request->Request == USB_REQ_GET_DESCRIPTOR) &&
+ ((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE)) ||
+ ((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_CLASS, USB_TARGET_DEVICE))))) {
+ DescriptorType = (UINT8)(Request->Value >> 8);
+ if ((DescriptorType == USB_DESC_TYPE_DEVICE) && ((*DataLength == sizeof (EFI_USB_DEVICE_DESCRIPTOR)) || ((DeviceSpeed == EFI_USB_SPEED_FULL) && (*DataLength == 8)))) {
+ ASSERT (Data != NULL);
+ //
+ // Store a copy of device scriptor as hub device need this info to configure endpoint.
+ //
+ CopyMem (&Xhc->UsbDevContext[SlotId].DevDesc, Data, *DataLength);
+ if (Xhc->UsbDevContext[SlotId].DevDesc.BcdUSB == 0x0300) {
+ //
+ // If it's a usb3.0 device, then its max packet size is a 2^n.
+ //
+ MaxPacket0 = 1 << Xhc->UsbDevContext[SlotId].DevDesc.MaxPacketSize0;
+ } else {
+ MaxPacket0 = Xhc->UsbDevContext[SlotId].DevDesc.MaxPacketSize0;
+ }
+ Xhc->UsbDevContext[SlotId].ConfDesc = AllocateZeroPool (Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations * sizeof (EFI_USB_CONFIG_DESCRIPTOR *));
+ if (Xhc->HcCParams.Data.Csz == 0) {
+ Status = XhcEvaluateContext (Xhc, SlotId, MaxPacket0);
+ } else {
+ Status = XhcEvaluateContext64 (Xhc, SlotId, MaxPacket0);
+ }
+ } else if (DescriptorType == USB_DESC_TYPE_CONFIG) {
+ ASSERT (Data != NULL);
+ if (*DataLength == ((UINT16 *)Data)[1]) {
+ //
+ // Get configuration value from request, Store the configuration descriptor for Configure_Endpoint cmd.
+ //
+ Index = (UINT8)Request->Value;
+ ASSERT (Index < Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations);
+ Xhc->UsbDevContext[SlotId].ConfDesc[Index] = AllocateZeroPool(*DataLength);
+ CopyMem (Xhc->UsbDevContext[SlotId].ConfDesc[Index], Data, *DataLength);
+ }
+ } else if (((DescriptorType == USB_DESC_TYPE_HUB) ||
+ (DescriptorType == USB_DESC_TYPE_HUB_SUPER_SPEED)) && (*DataLength > 2)) {
+ ASSERT (Data != NULL);
+ HubDesc = (EFI_USB_HUB_DESCRIPTOR *)Data;
+ ASSERT (HubDesc->NumPorts <= 15);
+ //
+ // The bit 5,6 of HubCharacter field of Hub Descriptor is TTT.
+ //
+ TTT = (UINT8)((HubDesc->HubCharacter & (BIT5 | BIT6)) >> 5);
+ if (Xhc->UsbDevContext[SlotId].DevDesc.DeviceProtocol == 2) {
+ //
+ // Don't support multi-TT feature for super speed hub now.
+ //
+ MTT = 0;
+ DEBUG ((EFI_D_ERROR, "XHCI: Don't support multi-TT feature for Hub now. (force to disable MTT)\n"));
+ } else {
+ MTT = 0;
+ }
+
+ if (Xhc->HcCParams.Data.Csz == 0) {
+ Status = XhcConfigHubContext (Xhc, SlotId, HubDesc->NumPorts, TTT, MTT);
+ } else {
+ Status = XhcConfigHubContext64 (Xhc, SlotId, HubDesc->NumPorts, TTT, MTT);
+ }
+ }
+ } else if ((Request->Request == USB_REQ_SET_CONFIG) &&
+ (Request->RequestType == USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE))) {
+ //
+ // Hook Set_Config request from UsbBus as we need configure device endpoint.
+ //
+ for (Index = 0; Index < Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations; Index++) {
+ if (Xhc->UsbDevContext[SlotId].ConfDesc[Index]->ConfigurationValue == (UINT8)Request->Value) {
+ if (Xhc->HcCParams.Data.Csz == 0) {
+ Status = XhcSetConfigCmd (Xhc, SlotId, DeviceSpeed, Xhc->UsbDevContext[SlotId].ConfDesc[Index]);
+ } else {
+ Status = XhcSetConfigCmd64 (Xhc, SlotId, DeviceSpeed, Xhc->UsbDevContext[SlotId].ConfDesc[Index]);
+ }
+ break;
+ }
+ }
+ } else if ((Request->Request == USB_REQ_GET_STATUS) &&
+ (Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_CLASS, USB_TARGET_OTHER))) {
+ ASSERT (Data != NULL);
+ //
+ // Hook Get_Status request from UsbBus to keep track of the port status change.
+ //
+ State = *(UINT32 *)Data;
+ PortStatus.PortStatus = 0;
+ PortStatus.PortChangeStatus = 0;
+
+ if (DeviceSpeed == EFI_USB_SPEED_SUPER) {
+ //
+ // For super speed hub, its bit10~12 presents the attached device speed.
+ //
+ if ((State & XHC_PORTSC_PS) >> 10 == 0) {
+ PortStatus.PortStatus |= USB_PORT_STAT_SUPER_SPEED;
+ }
+ } else {
+ //
+ // For high or full/low speed hub, its bit9~10 presents the attached device speed.
+ //
+ if (XHC_BIT_IS_SET (State, BIT9)) {
+ PortStatus.PortStatus |= USB_PORT_STAT_LOW_SPEED;
+ } else if (XHC_BIT_IS_SET (State, BIT10)) {
+ PortStatus.PortStatus |= USB_PORT_STAT_HIGH_SPEED;
+ }
+ }
+
+ //
+ // Convert the XHCI port/port change state to UEFI status
+ //
+ MapSize = sizeof (mUsbHubPortStateMap) / sizeof (USB_PORT_STATE_MAP);
+ for (Index = 0; Index < MapSize; Index++) {
+ if (XHC_BIT_IS_SET (State, mUsbHubPortStateMap[Index].HwState)) {
+ PortStatus.PortStatus = (UINT16) (PortStatus.PortStatus | mUsbHubPortStateMap[Index].UefiState);
+ }
+ }
+
+ MapSize = sizeof (mUsbHubPortChangeMap) / sizeof (USB_PORT_STATE_MAP);
+ for (Index = 0; Index < MapSize; Index++) {
+ if (XHC_BIT_IS_SET (State, mUsbHubPortChangeMap[Index].HwState)) {
+ PortStatus.PortChangeStatus = (UINT16) (PortStatus.PortChangeStatus | mUsbHubPortChangeMap[Index].UefiState);
+ }
+ }
+
+ MapSize = sizeof (mUsbHubClearPortChangeMap) / sizeof (USB_CLEAR_PORT_MAP);
+
+ for (Index = 0; Index < MapSize; Index++) {
+ if (XHC_BIT_IS_SET (State, mUsbHubClearPortChangeMap[Index].HwState)) {
+ ZeroMem (&ClearPortRequest, sizeof (EFI_USB_DEVICE_REQUEST));
+ ClearPortRequest.RequestType = USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_CLASS, USB_TARGET_OTHER);
+ ClearPortRequest.Request = (UINT8) USB_REQ_CLEAR_FEATURE;
+ ClearPortRequest.Value = mUsbHubClearPortChangeMap[Index].Selector;
+ ClearPortRequest.Index = Request->Index;
+ ClearPortRequest.Length = 0;
+
+ XhcControlTransfer (
+ This,
+ DeviceAddress,
+ DeviceSpeed,
+ MaximumPacketLength,
+ &ClearPortRequest,
+ EfiUsbNoData,
+ NULL,
+ &Len,
+ Timeout,
+ Translator,
+ TransferResult
+ );
+ }
+ }
+
+ XhcPollPortStatusChange (Xhc, Xhc->UsbDevContext[SlotId].RouteString, (UINT8)Request->Index, &PortStatus);
+
+ *(UINT32 *)Data = *(UINT32*)&PortStatus;
+ }
+
+FREE_URB:
+ FreePool (Urb);
+
+ON_EXIT:
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "XhcControlTransfer: error - %r, transfer - %x\n", Status, *TransferResult));
+ }
+
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Submits bulk transfer to a bulk endpoint of a USB device.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction in bit 7.
+ @param DeviceSpeed Device speed, Low speed device doesn't support bulk
+ transfer.
+ @param MaximumPacketLength Maximum packet size the endpoint is capable of
+ sending or receiving.
+ @param DataBuffersNumber Number of data buffers prepared for the transfer.
+ @param Data Array of pointers to the buffers of data to transmit
+ from or receive into.
+ @param DataLength The lenght of the data buffer.
+ @param DataToggle On input, the initial data toggle for the transfer;
+ On output, it is updated to to next data toggle to
+ use of the subsequent bulk transfer.
+ @param Timeout Indicates the maximum time, in millisecond, which
+ the transfer is allowed to complete.
+ @param Translator A pointr to the transaction translator data.
+ @param TransferResult A pointer to the detailed result information of the
+ bulk transfer.
+
+ @retval EFI_SUCCESS The transfer was completed successfully.
+ @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_TIMEOUT The transfer failed due to timeout.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcBulkTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN UINT8 DataBuffersNumber,
+ IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN Timeout,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ URB *Urb;
+ UINT8 SlotId;
+ EFI_STATUS Status;
+ EFI_STATUS RecoveryStatus;
+ EFI_TPL OldTpl;
+
+ //
+ // Validate the parameters
+ //
+ if ((DataLength == NULL) || (*DataLength == 0) ||
+ (Data == NULL) || (Data[0] == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 0) && (*DataToggle != 1)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((DeviceSpeed == EFI_USB_SPEED_LOW) ||
+ ((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) ||
+ ((EFI_USB_SPEED_HIGH == DeviceSpeed) && (MaximumPacketLength > 512)) ||
+ ((EFI_USB_SPEED_SUPER == DeviceSpeed) && (MaximumPacketLength > 1024))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ Status = EFI_DEVICE_ERROR;
+
+ if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) {
+ DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: HC is halted\n"));
+ goto ON_EXIT;
+ }
+
+ //
+ // Check if the device is still enabled before every transaction.
+ //
+ SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress);
+ if (SlotId == 0) {
+ goto ON_EXIT;
+ }
+
+ //
+ // Create a new URB, insert it into the asynchronous
+ // schedule list, then poll the execution status.
+ //
+ Urb = XhcCreateUrb (
+ Xhc,
+ DeviceAddress,
+ EndPointAddress,
+ DeviceSpeed,
+ MaximumPacketLength,
+ XHC_BULK_TRANSFER,
+ NULL,
+ Data[0],
+ *DataLength,
+ NULL,
+ NULL
+ );
+
+ if (Urb == NULL) {
+ DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: failed to create URB\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ Status = XhcExecTransfer (Xhc, FALSE, Urb, Timeout);
+
+ *TransferResult = Urb->Result;
+ *DataLength = Urb->Completed;
+
+ if (*TransferResult == EFI_USB_NOERROR) {
+ Status = EFI_SUCCESS;
+ } else if (*TransferResult == EFI_USB_ERR_STALL) {
+ RecoveryStatus = XhcRecoverHaltedEndpoint(Xhc, Urb);
+ if (EFI_ERROR (RecoveryStatus)) {
+ DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: XhcRecoverHaltedEndpoint failed\n"));
+ }
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ Xhc->PciIo->Flush (Xhc->PciIo);
+ XhcFreeUrb (Xhc, Urb);
+
+ON_EXIT:
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "XhcBulkTransfer: error - %r, transfer - %x\n", Status, *TransferResult));
+ }
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+/**
+ Submits an asynchronous interrupt transfer to an
+ interrupt endpoint of a USB device.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction encoded in bit 7
+ @param DeviceSpeed Indicates device speed.
+ @param MaximumPacketLength Maximum packet size the target endpoint is capable
+ @param IsNewTransfer If TRUE, to submit an new asynchronous interrupt
+ transfer If FALSE, to remove the specified
+ asynchronous interrupt.
+ @param DataToggle On input, the initial data toggle to use; on output,
+ it is updated to indicate the next data toggle.
+ @param PollingInterval The he interval, in milliseconds, that the transfer
+ is polled.
+ @param DataLength The length of data to receive at the rate specified
+ by PollingInterval.
+ @param Translator Transaction translator to use.
+ @param CallBackFunction Function to call at the rate specified by
+ PollingInterval.
+ @param Context Context to CallBackFunction.
+
+ @retval EFI_SUCCESS The request has been successfully submitted or canceled.
+ @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request failed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcAsyncInterruptTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN BOOLEAN IsNewTransfer,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN PollingInterval,
+ IN UINTN DataLength,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction,
+ IN VOID *Context OPTIONAL
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ URB *Urb;
+ EFI_STATUS Status;
+ UINT8 SlotId;
+ UINT8 Index;
+ UINT8 *Data;
+ EFI_TPL OldTpl;
+
+ //
+ // Validate parameters
+ //
+ if (!XHCI_IS_DATAIN (EndPointAddress)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (IsNewTransfer) {
+ if (DataLength == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 1) && (*DataToggle != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((PollingInterval > 255) || (PollingInterval < 1)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+
+ //
+ // Delete Async interrupt transfer request.
+ //
+ if (!IsNewTransfer) {
+ //
+ // The delete request may happen after device is detached.
+ //
+ for (Index = 0; Index < 255; Index++) {
+ if (Xhc->UsbDevContext[Index + 1].BusDevAddr == DeviceAddress) {
+ break;
+ }
+ }
+
+ if (Index == 255) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Status = XhciDelAsyncIntTransfer (Xhc, DeviceAddress, EndPointAddress);
+ DEBUG ((EFI_D_INFO, "XhcAsyncInterruptTransfer: remove old transfer for addr %d, Status = %r\n", DeviceAddress, Status));
+ goto ON_EXIT;
+ }
+
+ Status = EFI_SUCCESS;
+
+ if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) {
+ DEBUG ((EFI_D_ERROR, "XhcAsyncInterruptTransfer: HC is halt\n"));
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+
+ //
+ // Check if the device is still enabled before every transaction.
+ //
+ SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress);
+ if (SlotId == 0) {
+ goto ON_EXIT;
+ }
+
+ Data = AllocateZeroPool (DataLength);
+
+ if (Data == NULL) {
+ DEBUG ((EFI_D_ERROR, "XhcAsyncInterruptTransfer: failed to allocate buffer\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ Urb = XhcCreateUrb (
+ Xhc,
+ DeviceAddress,
+ EndPointAddress,
+ DeviceSpeed,
+ MaximumPacketLength,
+ XHC_INT_TRANSFER_ASYNC,
+ NULL,
+ Data,
+ DataLength,
+ CallBackFunction,
+ Context
+ );
+
+ if (Urb == NULL) {
+ DEBUG ((EFI_D_ERROR, "XhcAsyncInterruptTransfer: failed to create URB\n"));
+ FreePool (Data);
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ InsertHeadList (&Xhc->AsyncIntTransfers, &Urb->UrbList);
+ //
+ // Ring the doorbell
+ //
+ Status = RingIntTransferDoorBell (Xhc, Urb);
+
+ON_EXIT:
+ Xhc->PciIo->Flush (Xhc->PciIo);
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Submits synchronous interrupt transfer to an interrupt endpoint
+ of a USB device.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress Endpoint number and its direction encoded in bit 7
+ @param DeviceSpeed Indicates device speed.
+ @param MaximumPacketLength Maximum packet size the target endpoint is capable
+ of sending or receiving.
+ @param Data Buffer of data that will be transmitted to USB
+ device or received from USB device.
+ @param DataLength On input, the size, in bytes, of the data buffer; On
+ output, the number of bytes transferred.
+ @param DataToggle On input, the initial data toggle to use; on output,
+ it is updated to indicate the next data toggle.
+ @param Timeout Maximum time, in second, to complete.
+ @param Translator Transaction translator to use.
+ @param TransferResult Variable to receive the transfer result.
+
+ @return EFI_SUCCESS The transfer was completed successfully.
+ @return EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
+ @return EFI_INVALID_PARAMETER Some parameters are invalid.
+ @return EFI_TIMEOUT The transfer failed due to timeout.
+ @return EFI_DEVICE_ERROR The failed due to host controller or device error
+
+**/
+EFI_STATUS
+EFIAPI
+XhcSyncInterruptTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN OUT VOID *Data,
+ IN OUT UINTN *DataLength,
+ IN OUT UINT8 *DataToggle,
+ IN UINTN Timeout,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ URB *Urb;
+ UINT8 SlotId;
+ EFI_STATUS Status;
+ EFI_STATUS RecoveryStatus;
+ EFI_TPL OldTpl;
+
+ //
+ // Validates parameters
+ //
+ if ((DataLength == NULL) || (*DataLength == 0) ||
+ (Data == NULL) || (TransferResult == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!XHCI_IS_DATAIN (EndPointAddress)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*DataToggle != 1) && (*DataToggle != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (((DeviceSpeed == EFI_USB_SPEED_LOW) && (MaximumPacketLength != 8)) ||
+ ((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) ||
+ ((DeviceSpeed == EFI_USB_SPEED_HIGH) && (MaximumPacketLength > 3072))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ OldTpl = gBS->RaiseTPL (XHC_TPL);
+
+ Xhc = XHC_FROM_THIS (This);
+
+ *TransferResult = EFI_USB_ERR_SYSTEM;
+ Status = EFI_DEVICE_ERROR;
+
+ if (XhcIsHalt (Xhc) || XhcIsSysError (Xhc)) {
+ DEBUG ((EFI_D_ERROR, "EhcSyncInterruptTransfer: HC is halt\n"));
+ goto ON_EXIT;
+ }
+
+ //
+ // Check if the device is still enabled before every transaction.
+ //
+ SlotId = XhcBusDevAddrToSlotId (Xhc, DeviceAddress);
+ if (SlotId == 0) {
+ goto ON_EXIT;
+ }
+
+ Urb = XhcCreateUrb (
+ Xhc,
+ DeviceAddress,
+ EndPointAddress,
+ DeviceSpeed,
+ MaximumPacketLength,
+ XHC_INT_TRANSFER_SYNC,
+ NULL,
+ Data,
+ *DataLength,
+ NULL,
+ NULL
+ );
+
+ if (Urb == NULL) {
+ DEBUG ((EFI_D_ERROR, "XhcSyncInterruptTransfer: failed to create URB\n"));
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ Status = XhcExecTransfer (Xhc, FALSE, Urb, Timeout);
+
+ *TransferResult = Urb->Result;
+ *DataLength = Urb->Completed;
+
+ if (*TransferResult == EFI_USB_NOERROR) {
+ Status = EFI_SUCCESS;
+ } else if (*TransferResult == EFI_USB_ERR_STALL) {
+ RecoveryStatus = XhcRecoverHaltedEndpoint(Xhc, Urb);
+ if (EFI_ERROR (RecoveryStatus)) {
+ DEBUG ((EFI_D_ERROR, "XhcSyncInterruptTransfer: XhcRecoverHaltedEndpoint failed\n"));
+ }
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ Xhc->PciIo->Flush (Xhc->PciIo);
+ XhcFreeUrb (Xhc, Urb);
+
+ON_EXIT:
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "XhcSyncInterruptTransfer: error - %r, transfer - %x\n", Status, *TransferResult));
+ }
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+
+/**
+ Submits isochronous transfer to a target USB device.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress End point address with its direction.
+ @param DeviceSpeed Device speed, Low speed device doesn't support this
+ type.
+ @param MaximumPacketLength Maximum packet size that the endpoint is capable of
+ sending or receiving.
+ @param DataBuffersNumber Number of data buffers prepared for the transfer.
+ @param Data Array of pointers to the buffers of data that will
+ be transmitted to USB device or received from USB
+ device.
+ @param DataLength The size, in bytes, of the data buffer.
+ @param Translator Transaction translator to use.
+ @param TransferResult Variable to receive the transfer result.
+
+ @return EFI_UNSUPPORTED Isochronous transfer is unsupported.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcIsochronousTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN UINT8 DataBuffersNumber,
+ IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],
+ IN UINTN DataLength,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ OUT UINT32 *TransferResult
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ Submits Async isochronous transfer to a target USB device.
+
+ @param This This EFI_USB2_HC_PROTOCOL instance.
+ @param DeviceAddress Target device address.
+ @param EndPointAddress End point address with its direction.
+ @param DeviceSpeed Device speed, Low speed device doesn't support this
+ type.
+ @param MaximumPacketLength Maximum packet size that the endpoint is capable of
+ sending or receiving.
+ @param DataBuffersNumber Number of data buffers prepared for the transfer.
+ @param Data Array of pointers to the buffers of data that will
+ be transmitted to USB device or received from USB
+ device.
+ @param DataLength The size, in bytes, of the data buffer.
+ @param Translator Transaction translator to use.
+ @param IsochronousCallBack Function to be called when the transfer complete.
+ @param Context Context passed to the call back function as
+ parameter.
+
+ @return EFI_UNSUPPORTED Isochronous transfer isn't supported.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcAsyncIsochronousTransfer (
+ IN EFI_USB2_HC_PROTOCOL *This,
+ IN UINT8 DeviceAddress,
+ IN UINT8 EndPointAddress,
+ IN UINT8 DeviceSpeed,
+ IN UINTN MaximumPacketLength,
+ IN UINT8 DataBuffersNumber,
+ IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],
+ IN UINTN DataLength,
+ IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
+ IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,
+ IN VOID *Context
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Entry point for EFI drivers.
+
+ @param ImageHandle EFI_HANDLE.
+ @param SystemTable EFI_SYSTEM_TABLE.
+
+ @retval EFI_SUCCESS Success.
+ @retval Others Fail.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcDriverEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ return EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gXhciDriverBinding,
+ ImageHandle,
+ &gXhciComponentName,
+ &gXhciComponentName2
+ );
+}
+
+
+/**
+ Test to see if this driver supports ControllerHandle. Any
+ ControllerHandle that has Usb2HcProtocol installed will
+ be supported.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to test.
+ @param RemainingDevicePath Not used.
+
+ @return EFI_SUCCESS This driver supports this device.
+ @return EFI_UNSUPPORTED This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcDriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ USB_CLASSC UsbClassCReg;
+
+ //
+ // Test whether there is PCI IO Protocol attached on the controller handle.
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CLASSCODE_OFFSET,
+ sizeof (USB_CLASSC) / sizeof (UINT8),
+ &UsbClassCReg
+ );
+
+ if (EFI_ERROR (Status)) {
+ Status = EFI_UNSUPPORTED;
+ goto ON_EXIT;
+ }
+
+ //
+ // Test whether the controller belongs to Xhci type
+ //
+ if ((UsbClassCReg.BaseCode != PCI_CLASS_SERIAL) ||
+ (UsbClassCReg.SubClassCode != PCI_CLASS_SERIAL_USB) ||
+ (UsbClassCReg.ProgInterface != PCI_IF_XHCI)) {
+ Status = EFI_UNSUPPORTED;
+ }
+
+ON_EXIT:
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return Status;
+}
+
+/**
+ Create and initialize a USB_XHCI_INSTANCE structure.
+
+ @param PciIo The PciIo on this device.
+ @param DevicePath The device path of host controller.
+ @param OriginalPciAttributes Original PCI attributes.
+
+ @return The allocated and initialized USB_XHCI_INSTANCE structure if created,
+ otherwise NULL.
+
+**/
+USB_XHCI_INSTANCE*
+XhcCreateUsbHc (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ IN UINT64 OriginalPciAttributes
+ )
+{
+ USB_XHCI_INSTANCE *Xhc;
+ EFI_STATUS Status;
+ UINT32 PageSize;
+ UINT16 ExtCapReg;
+
+ Xhc = AllocateZeroPool (sizeof (USB_XHCI_INSTANCE));
+
+ if (Xhc == NULL) {
+ return NULL;
+ }
+
+ //
+ // Initialize private data structure
+ //
+ Xhc->Signature = XHCI_INSTANCE_SIG;
+ Xhc->PciIo = PciIo;
+ Xhc->DevicePath = DevicePath;
+ Xhc->OriginalPciAttributes = OriginalPciAttributes;
+ CopyMem (&Xhc->Usb2Hc, &gXhciUsb2HcTemplate, sizeof (EFI_USB2_HC_PROTOCOL));
+
+ InitializeListHead (&Xhc->AsyncIntTransfers);
+
+ //
+ // Be caution that the Offset passed to XhcReadCapReg() should be Dword align
+ //
+ Xhc->CapLength = XhcReadCapReg8 (Xhc, XHC_CAPLENGTH_OFFSET);
+ Xhc->HcSParams1.Dword = XhcReadCapReg (Xhc, XHC_HCSPARAMS1_OFFSET);
+ Xhc->HcSParams2.Dword = XhcReadCapReg (Xhc, XHC_HCSPARAMS2_OFFSET);
+ Xhc->HcCParams.Dword = XhcReadCapReg (Xhc, XHC_HCCPARAMS_OFFSET);
+ Xhc->DBOff = XhcReadCapReg (Xhc, XHC_DBOFF_OFFSET);
+ Xhc->RTSOff = XhcReadCapReg (Xhc, XHC_RTSOFF_OFFSET);
+
+ //
+ // This PageSize field defines the page size supported by the xHC implementation.
+ // This xHC supports a page size of 2^(n+12) if bit n is Set. For example,
+ // if bit 0 is Set, the xHC supports 4k byte page sizes.
+ //
+ PageSize = XhcReadOpReg(Xhc, XHC_PAGESIZE_OFFSET) & XHC_PAGESIZE_MASK;
+ Xhc->PageSize = 1 << (HighBitSet32(PageSize) + 12);
+
+ ExtCapReg = (UINT16) (Xhc->HcCParams.Data.ExtCapReg);
+ Xhc->ExtCapRegBase = ExtCapReg << 2;
+ Xhc->UsbLegSupOffset = XhcGetCapabilityAddr (Xhc, XHC_CAP_USB_LEGACY);
+ Xhc->DebugCapSupOffset = XhcGetCapabilityAddr (Xhc, XHC_CAP_USB_DEBUG);
+
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: Capability length 0x%x\n", Xhc->CapLength));
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: HcSParams1 0x%x\n", Xhc->HcSParams1));
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: HcSParams2 0x%x\n", Xhc->HcSParams2));
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: HcCParams 0x%x\n", Xhc->HcCParams));
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: DBOff 0x%x\n", Xhc->DBOff));
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: RTSOff 0x%x\n", Xhc->RTSOff));
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: UsbLegSupOffset 0x%x\n", Xhc->UsbLegSupOffset));
+ DEBUG ((EFI_D_INFO, "XhcCreateUsb3Hc: DebugCapSupOffset 0x%x\n", Xhc->DebugCapSupOffset));
+
+ //
+ // Create AsyncRequest Polling Timer
+ //
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ XhcMonitorAsyncRequests,
+ Xhc,
+ &Xhc->PollTimer
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ return Xhc;
+
+ON_ERROR:
+ FreePool (Xhc);
+ return NULL;
+}
+
+/**
+ One notified function to stop the Host Controller when gBS->ExitBootServices() called.
+
+ @param Event Pointer to this event
+ @param Context Event hanlder private data
+
+**/
+VOID
+EFIAPI
+XhcExitBootService (
+ EFI_EVENT Event,
+ VOID *Context
+ )
+
+{
+ USB_XHCI_INSTANCE *Xhc;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ Xhc = (USB_XHCI_INSTANCE*) Context;
+ PciIo = Xhc->PciIo;
+
+ //
+ // Stop AsyncRequest Polling timer then stop the XHCI driver
+ // and uninstall the XHCI protocl.
+ //
+ gBS->SetTimer (Xhc->PollTimer, TimerCancel, 0);
+ XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT);
+
+ if (Xhc->PollTimer != NULL) {
+ gBS->CloseEvent (Xhc->PollTimer);
+ }
+
+ XhcClearBiosOwnership (Xhc);
+
+ //
+ // Restore original PCI attributes
+ //
+ PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ Xhc->OriginalPciAttributes,
+ NULL
+ );
+}
+
+/**
+ Starting the Usb XHCI Driver.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to test.
+ @param RemainingDevicePath Not used.
+
+ @return EFI_SUCCESS supports this device.
+ @return EFI_UNSUPPORTED do not support this device.
+ @return EFI_DEVICE_ERROR cannot be started due to device Error.
+ @return EFI_OUT_OF_RESOURCES cannot allocate resources.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcDriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT64 Supports;
+ UINT64 OriginalPciAttributes;
+ BOOLEAN PciAttributesSaved;
+ USB_XHCI_INSTANCE *Xhc;
+ EFI_DEVICE_PATH_PROTOCOL *HcDevicePath;
+
+ //
+ // Open the PciIo Protocol, then enable the USB host controller
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Open Device Path Protocol for on USB host controller
+ //
+ HcDevicePath = NULL;
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &HcDevicePath,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+
+ PciAttributesSaved = FALSE;
+ //
+ // Save original PCI attributes
+ //
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationGet,
+ 0,
+ &OriginalPciAttributes
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto CLOSE_PCIIO;
+ }
+ PciAttributesSaved = TRUE;
+
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSupported,
+ 0,
+ &Supports
+ );
+ if (!EFI_ERROR (Status)) {
+ Supports &= EFI_PCI_DEVICE_ENABLE;
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationEnable,
+ Supports,
+ NULL
+ );
+ }
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to enable controller\n"));
+ goto CLOSE_PCIIO;
+ }
+
+ //
+ // Create then install USB2_HC_PROTOCOL
+ //
+ Xhc = XhcCreateUsbHc (PciIo, HcDevicePath, OriginalPciAttributes);
+
+ if (Xhc == NULL) {
+ DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to create USB2_HC\n"));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ XhcSetBiosOwnership (Xhc);
+
+ XhcResetHC (Xhc, XHC_RESET_TIMEOUT);
+ ASSERT (XhcIsHalt (Xhc));
+
+ //
+ // After Chip Hardware Reset wait until the Controller Not Ready (CNR) flag
+ // in the USBSTS is '0' before writing any xHC Operational or Runtime registers.
+ //
+ ASSERT (!(XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_CNR)));
+
+ //
+ // Initialize the schedule
+ //
+ XhcInitSched (Xhc);
+
+ //
+ // Start the Host Controller
+ //
+ XhcRunHC(Xhc, XHC_GENERIC_TIMEOUT);
+
+ //
+ // Start the asynchronous interrupt monitor
+ //
+ Status = gBS->SetTimer (Xhc->PollTimer, TimerPeriodic, XHC_ASYNC_TIMER_INTERVAL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to start async interrupt monitor\n"));
+ XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT);
+ goto FREE_POOL;
+ }
+
+ //
+ // Create event to stop the HC when exit boot service.
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ XhcExitBootService,
+ Xhc,
+ &gEfiEventExitBootServicesGuid,
+ &Xhc->ExitBootServiceEvent
+ );
+ if (EFI_ERROR (Status)) {
+ goto FREE_POOL;
+ }
+
+ //
+ // Install the component name protocol, don't fail the start
+ // because of something for display.
+ //
+ AddUnicodeString2 (
+ "eng",
+ gXhciComponentName.SupportedLanguages,
+ &Xhc->ControllerNameTable,
+ L"eXtensible Host Controller (USB 3.0)",
+ TRUE
+ );
+ AddUnicodeString2 (
+ "en",
+ gXhciComponentName2.SupportedLanguages,
+ &Xhc->ControllerNameTable,
+ L"eXtensible Host Controller (USB 3.0)",
+ FALSE
+ );
+
+ Status = gBS->InstallProtocolInterface (
+ &Controller,
+ &gEfiUsb2HcProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &Xhc->Usb2Hc
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "XhcDriverBindingStart: failed to install USB2_HC Protocol\n"));
+ goto FREE_POOL;
+ }
+
+ DEBUG ((EFI_D_INFO, "XhcDriverBindingStart: XHCI started for controller @ %x\n", Controller));
+ return EFI_SUCCESS;
+
+FREE_POOL:
+ gBS->CloseEvent (Xhc->PollTimer);
+ XhcFreeSched (Xhc);
+ FreePool (Xhc);
+
+CLOSE_PCIIO:
+ if (PciAttributesSaved) {
+ //
+ // Restore original PCI attributes
+ //
+ PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ OriginalPciAttributes,
+ NULL
+ );
+ }
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return Status;
+}
+
+
+/**
+ Stop this driver on ControllerHandle. Support stoping any child handles
+ created by this driver.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to stop driver on.
+ @param NumberOfChildren Number of Children in the ChildHandleBuffer.
+ @param ChildHandleBuffer List of handles for the children we need to stop.
+
+ @return EFI_SUCCESS Success.
+ @return EFI_DEVICE_ERROR Fail.
+
+**/
+EFI_STATUS
+EFIAPI
+XhcDriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ EFI_USB2_HC_PROTOCOL *Usb2Hc;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ USB_XHCI_INSTANCE *Xhc;
+ UINT8 Index;
+
+ //
+ // Test whether the Controller handler passed in is a valid
+ // Usb controller handle that should be supported, if not,
+ // return the error status directly
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiUsb2HcProtocolGuid,
+ (VOID **) &Usb2Hc,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->UninstallProtocolInterface (
+ Controller,
+ &gEfiUsb2HcProtocolGuid,
+ Usb2Hc
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Xhc = XHC_FROM_THIS (Usb2Hc);
+ PciIo = Xhc->PciIo;
+
+ //
+ // Stop AsyncRequest Polling timer then stop the XHCI driver
+ // and uninstall the XHCI protocl.
+ //
+ gBS->SetTimer (Xhc->PollTimer, TimerCancel, 0);
+
+ //
+ // Disable the device slots occupied by these devices on its downstream ports.
+ // Entry 0 is reserved.
+ //
+ for (Index = 0; Index < 255; Index++) {
+ if (!Xhc->UsbDevContext[Index + 1].Enabled ||
+ (Xhc->UsbDevContext[Index + 1].SlotId == 0)) {
+ continue;
+ }
+ if (Xhc->HcCParams.Data.Csz == 0) {
+ XhcDisableSlotCmd (Xhc, Xhc->UsbDevContext[Index + 1].SlotId);
+ } else {
+ XhcDisableSlotCmd64 (Xhc, Xhc->UsbDevContext[Index + 1].SlotId);
+ }
+ }
+
+ if (Xhc->PollTimer != NULL) {
+ gBS->CloseEvent (Xhc->PollTimer);
+ }
+
+ if (Xhc->ExitBootServiceEvent != NULL) {
+ gBS->CloseEvent (Xhc->ExitBootServiceEvent);
+ }
+
+ XhcHaltHC (Xhc, XHC_GENERIC_TIMEOUT);
+ XhcClearBiosOwnership (Xhc);
+ XhciDelAllAsyncIntTransfers (Xhc);
+ XhcFreeSched (Xhc);
+
+ if (Xhc->ControllerNameTable) {
+ FreeUnicodeStringTable (Xhc->ControllerNameTable);
+ }
+
+ //
+ // Restore original PCI attributes
+ //
+ PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ Xhc->OriginalPciAttributes,
+ NULL
+ );
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ FreePool (Xhc);
+
+ return EFI_SUCCESS;
+}
+
|