EmbeddedPkg: Fix various typos

Fix various typos in EmbeddedPkg.

Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

7 files changed, 15 insertions, 15 deletions

diff --git a/EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLib.c b/EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLib.c
index 819ed42..2841689 100644
--- a/EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLib.c
+++ b/EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLib.c
@@ -15,7 +15,7 @@
 /**

   Setup all the hardware needed for the debug agents timer.

 

-  This function is used to set up debug enviroment. It may enable interrupts.

+  This function is used to set up debug environment. It may enable interrupts.

 

 **/

 VOID

diff --git a/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c b/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c
index 738aa24..d2bafcf 100644
--- a/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c
+++ b/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c
@@ -1,5 +1,5 @@
 /** @file

-  Basic serial IO abstaction for GDB

+  Basic serial IO abstraction for GDB

 

   Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

 

@@ -50,7 +50,7 @@ GdbSerialLibDebugPortConstructor (
 

 

 /**

-  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,

+  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,

   data buts, and stop bits on a serial device. This call is optional as the serial

   port will be set up with defaults base on PCD values.

 

@@ -59,13 +59,13 @@ GdbSerialLibDebugPortConstructor (
   @param  Parity           The type of parity to use on this serial device. A Parity value of

                            DefaultParity will use the device's default parity value.

   @param  DataBits         The number of data bits to use on the serial device. A DataBits

-                           vaule of 0 will use the device's default data bit setting.

+                           value of 0 will use the device's default data bit setting.

   @param  StopBits         The number of stop bits to use on this serial device. A StopBits

                            value of DefaultStopBits will use the device's default number of

                            stop bits.

 

   @retval EFI_SUCCESS      The device was configured.

-  @retval EFI_DEVICE_ERROR The serial device could not be coonfigured.

+  @retval EFI_DEVICE_ERROR The serial device could not be configured.

 

 **/

 RETURN_STATUS

diff --git a/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c b/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c
index be5cda6..088e23e 100644
--- a/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c
+++ b/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c
@@ -1,5 +1,5 @@
 /** @file

-  Basic serial IO abstaction for GDB

+  Basic serial IO abstraction for GDB

 

   Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

 

@@ -80,7 +80,7 @@ GdbSerialLibConstructor (
 

 

 /**

-  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,

+  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,

   data buts, and stop bits on a serial device. This call is optional as the serial

   port will be set up with defaults base on PCD values.

 

@@ -89,13 +89,13 @@ GdbSerialLibConstructor (
   @param  Parity           The type of parity to use on this serial device. A Parity value of

                            DefaultParity will use the device's default parity value.

   @param  DataBits         The number of data bits to use on the serial device. A DataBits

-                           vaule of 0 will use the device's default data bit setting.

+                           value of 0 will use the device's default data bit setting.

   @param  StopBits         The number of stop bits to use on this serial device. A StopBits

                            value of DefaultStopBits will use the device's default number of

                            stop bits.

 

   @retval EFI_SUCCESS      The device was configured.

-  @retval EFI_DEVICE_ERROR The serial device could not be coonfigured.

+  @retval EFI_DEVICE_ERROR The serial device could not be configured.

 

 **/

 RETURN_STATUS

diff --git a/EmbeddedPkg/Library/PrePiHobLib/Hob.c b/EmbeddedPkg/Library/PrePiHobLib/Hob.c
index 47bd008..b5cc6c5 100644
--- a/EmbeddedPkg/Library/PrePiHobLib/Hob.c
+++ b/EmbeddedPkg/Library/PrePiHobLib/Hob.c
@@ -812,7 +812,7 @@ BuildPeCoffLoaderHob (
   BuildGuidDataHob (&gPeCoffLoaderProtocolGuid, &Ptr, sizeof (VOID *));

 }

 

-// May want to put this into a library so you only need the PCD setings if you are using the feature?

+// May want to put this into a library so you only need the PCD settings if you are using the feature?

 VOID

 BuildMemoryTypeInformationHob (

   VOID

diff --git a/EmbeddedPkg/Library/PrePiLib/FwVol.c b/EmbeddedPkg/Library/PrePiLib/FwVol.c
index 797779f..881506e 100644
--- a/EmbeddedPkg/Library/PrePiLib/FwVol.c
+++ b/EmbeddedPkg/Library/PrePiLib/FwVol.c
@@ -732,7 +732,7 @@ FfsGetVolumeInfo (
   Search through every FV until you find a file of type FileType

 

   @param FileType        File handle of a Fv type file.

-  @param Volumehandle    On succes Volume Handle of the match

+  @param Volumehandle    On success Volume Handle of the match

   @param FileHandle      On success File Handle of the match

 

   @retval EFI_NOT_FOUND  FV image can't be found.

@@ -857,7 +857,7 @@ FfsProcessFvFile (
 

 

   //

-  // Inform HOB consumer phase, i.e. DXE core, the existance of this FV

+  // Inform HOB consumer phase, i.e. DXE core, the existence of this FV

   //

   BuildFvHob ((EFI_PHYSICAL_ADDRESS) (UINTN) FvImageInfo.FvStart, FvImageInfo.FvSize);

 

diff --git a/EmbeddedPkg/Library/PrePiMemoryAllocationLib/MemoryAllocationLib.c b/EmbeddedPkg/Library/PrePiMemoryAllocationLib/MemoryAllocationLib.c
index 7ce71c2..6d233ac 100644
--- a/EmbeddedPkg/Library/PrePiMemoryAllocationLib/MemoryAllocationLib.c
+++ b/EmbeddedPkg/Library/PrePiMemoryAllocationLib/MemoryAllocationLib.c
@@ -180,7 +180,7 @@ AllocatePool (
   // Verify that there is sufficient memory to satisfy the allocation

   //

   if (AllocationSize > 0x10000) {

-    // Please call AllcoatePages for big allocations

+    // Please call AllocatePages for big allocations

     return 0;

   } else {

 

diff --git a/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c b/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
index 9ab8e4e..d9f5633 100644
--- a/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
+++ b/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
@@ -135,7 +135,7 @@ LibRtcInitialize (
   )

 {

   //

-  // Do some initialization if reqruied to turn on the RTC

+  // Do some initialization if required to turn on the RTC

   //

   return EFI_SUCCESS;

 }

@@ -159,7 +159,7 @@ LibRtcVirtualNotifyEvent (
   //

   // Only needed if you are going to support the OS calling RTC functions in virtual mode.

   // You will need to call EfiConvertPointer (). To convert any stored physical addresses

-  // to virtual address. After the OS transistions to calling in virtual mode, all future

+  // to virtual address. After the OS transitions to calling in virtual mode, all future

   // runtime calls will be made in virtual mode.

   //

   return;