DynamicTablesPkg: Add SSDT Serial port for SPCR

According to Arm Server Base Boot Requirements,
Platform Design Document version 1.2 revision D,
September 2, 2019, section '4.2.1.8 SPCR'; the
SPCR console device must be included in the DSDT.

The SSDT Serial port fixup library provides
interfaces to generate a SSDT Serial port table
based on the serial port information.

Update the SPCR Generator to use the SSDT serial
port fixup library to build a serial port definition
block corresponding to the SPCR serial port and
install the SSDT table.

Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

2 files changed, 164 insertions, 62 deletions

diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/AcpiSpcrLibArm.inf b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/AcpiSpcrLibArm.inf
index 0ebe1ff..e11f878 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/AcpiSpcrLibArm.inf
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/AcpiSpcrLibArm.inf
@@ -1,7 +1,7 @@
 ## @file

 #  SPCR Table Generator

 #

-#  Copyright (c) 2017 - 2018, ARM Limited. All rights reserved.

+#  Copyright (c) 2017 - 2020, Arm Limited. All rights reserved.<BR>

 #

 #  SPDX-License-Identifier: BSD-2-Clause-Patent

 ##

@@ -27,6 +27,7 @@
 

 [LibraryClasses]

   BaseLib

+  SsdtSerialPortFixupLib

 

 [Pcd]

 

diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/SpcrGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/SpcrGenerator.c
index b80e98e..24bb5c0 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/SpcrGenerator.c
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSpcrLibArm/SpcrGenerator.c
@@ -1,7 +1,8 @@
 /** @file

   SPCR Table Generator

 

-  Copyright (c) 2017 - 2020, ARM Limited. All rights reserved.

+  Copyright (c) 2017 - 2020, Arm Limited. All rights reserved.<BR>

+

   SPDX-License-Identifier: BSD-2-Clause-Patent

 

   @par Reference(s):

@@ -14,12 +15,14 @@
 #include <IndustryStandard/SerialPortConsoleRedirectionTable.h>

 #include <Library/AcpiLib.h>

 #include <Library/DebugLib.h>

+#include <Library/MemoryAllocationLib.h>

 #include <Protocol/AcpiTable.h>

 

 // Module specific include files.

 #include <AcpiTableGenerator.h>

 #include <ConfigurationManagerObject.h>

 #include <ConfigurationManagerHelper.h>

+#include <Library/SsdtSerialPortFixupLib.h>

 #include <Library/TableHelperLib.h>

 #include <Protocol/ConfigurationManagerProtocol.h>

 

@@ -40,6 +43,14 @@ NOTE: This implementation ignores the possibility that the Serial settings may
 

 #pragma pack(1)

 

+/** A string representing the name of the SPCR port.

+*/

+#define NAME_STR_SPCR_PORT               "COM1"

+

+/** An UID representing the SPCR port.

+*/

+#define UID_SPCR_PORT                    1

+

 /** This macro defines the no flow control option.

 */

 #define SPCR_FLOW_CONTROL_NONE           0

@@ -92,47 +103,111 @@ GET_OBJECT_LIST (
   CM_ARM_SERIAL_PORT_INFO

   )

 

-/** Construct the SPCR ACPI table.

+/** Free any resources allocated for constructing the tables.

+

+  @param [in]      This           Pointer to the ACPI table generator.

+  @param [in]      AcpiTableInfo  Pointer to the ACPI Table Info.

+  @param [in]      CfgMgrProtocol Pointer to the Configuration Manager

+                                  Protocol Interface.

+  @param [in, out] Table          Pointer to an array of pointers

+                                  to ACPI Table(s).

+  @param [in]      TableCount     Number of ACPI table(s).

+

+  @retval EFI_SUCCESS           The resources were freed successfully.

+  @retval EFI_INVALID_PARAMETER The table pointer is NULL or invalid.

+**/

+STATIC

+EFI_STATUS

+EFIAPI

+FreeSpcrTableEx (

+  IN      CONST ACPI_TABLE_GENERATOR                   * CONST This,

+  IN      CONST CM_STD_OBJ_ACPI_TABLE_INFO             * CONST AcpiTableInfo,

+  IN      CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL   * CONST CfgMgrProtocol,

+  IN OUT        EFI_ACPI_DESCRIPTION_HEADER          *** CONST Table,

+  IN      CONST UINTN                                          TableCount

+  )

+{

+  EFI_STATUS                        Status;

+  EFI_ACPI_DESCRIPTION_HEADER    ** TableList;

+

+  ASSERT (This != NULL);

+  ASSERT (AcpiTableInfo != NULL);

+  ASSERT (CfgMgrProtocol != NULL);

+  ASSERT (AcpiTableInfo->TableGeneratorId == This->GeneratorID);

+  ASSERT (AcpiTableInfo->AcpiTableSignature == This->AcpiTableSignature);

+

+  if ((Table == NULL)   ||

+      (*Table == NULL)  ||

+      (TableCount != 2)) {

+    DEBUG ((DEBUG_ERROR, "ERROR: SPCR: Invalid Table Pointer\n"));

+    return EFI_INVALID_PARAMETER;

+  }

+

+  TableList = *Table;

+

+  if ((TableList[1] == NULL) ||

+      (TableList[1]->Signature !=

+       EFI_ACPI_6_3_SECONDARY_SYSTEM_DESCRIPTION_TABLE_SIGNATURE)) {

+    DEBUG ((DEBUG_ERROR, "ERROR: SPCR: Invalid SSDT table pointer.\n"));

+    return EFI_INVALID_PARAMETER;

+  }

+

+  // Only need to free the SSDT table at index 1. The SPCR table is static.

+  Status = FreeSsdtSerialPortTable (TableList[1]);

+  ASSERT_EFI_ERROR (Status);

+

+  // Free the table list.

+  FreePool (*Table);

+

+  return Status;

+}

+

+/** Construct the SPCR ACPI table and its associated SSDT table.

 

   This function invokes the Configuration Manager protocol interface

   to get the required hardware information for generating the ACPI

   table.

 

   If this function allocates any resources then they must be freed

-  in the FreeXXXXTableResources function.

-

-  @param [in]  This           Pointer to the table generator.

-  @param [in]  AcpiTableInfo  Pointer to the ACPI Table Info.

-  @param [in]  CfgMgrProtocol Pointer to the Configuration Manager

-                              Protocol Interface.

-  @param [out] Table          Pointer to the constructed ACPI Table.

-

-  @retval EFI_SUCCESS           Table generated successfully.

-  @retval EFI_INVALID_PARAMETER A parameter is invalid.

-  @retval EFI_NOT_FOUND         The required object was not found.

-  @retval EFI_UNSUPPORTED       An unsupported baudrate was specified by the

-                                Configuration Manager.

-  @retval EFI_BAD_BUFFER_SIZE   The size returned by the Configuration

-                                Manager is less than the Object size for the

-                                requested object.

+  in the FreeXXXXTableResourcesEx function.

+

+  @param [in]  This            Pointer to the ACPI table generator.

+  @param [in]  AcpiTableInfo   Pointer to the ACPI table information.

+  @param [in]  CfgMgrProtocol  Pointer to the Configuration Manager

+                               Protocol interface.

+  @param [out] Table           Pointer to a list of generated ACPI table(s).

+  @param [out] TableCount      Number of generated ACPI table(s).

+

+  @retval EFI_SUCCESS            Table generated successfully.

+  @retval EFI_BAD_BUFFER_SIZE    The size returned by the Configuration

+                                 Manager is less than the Object size for

+                                 the requested object.

+  @retval EFI_INVALID_PARAMETER  A parameter is invalid.

+  @retval EFI_NOT_FOUND          Could not find information.

+  @retval EFI_OUT_OF_RESOURCES   Could not allocate memory.

+  @retval EFI_UNSUPPORTED        Unsupported configuration.

 **/

 STATIC

 EFI_STATUS

 EFIAPI

-BuildSpcrTable (

-  IN  CONST ACPI_TABLE_GENERATOR                  * CONST This,

-  IN  CONST CM_STD_OBJ_ACPI_TABLE_INFO            * CONST AcpiTableInfo,

-  IN  CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL  * CONST CfgMgrProtocol,

-  OUT       EFI_ACPI_DESCRIPTION_HEADER          ** CONST Table

+BuildSpcrTableEx (

+  IN  CONST ACPI_TABLE_GENERATOR                   *       This,

+  IN  CONST CM_STD_OBJ_ACPI_TABLE_INFO             * CONST AcpiTableInfo,

+  IN  CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL   * CONST CfgMgrProtocol,

+  OUT       EFI_ACPI_DESCRIPTION_HEADER          ***       Table,

+  OUT       UINTN                                  * CONST TableCount

   )

 {

-  EFI_STATUS                 Status;

-  CM_ARM_SERIAL_PORT_INFO  * SerialPortInfo;

+  EFI_STATUS                      Status;

+  CM_ARM_SERIAL_PORT_INFO       * SerialPortInfo;

+  UINT32                          SerialPortCount;

+  EFI_ACPI_DESCRIPTION_HEADER  ** TableList;

 

   ASSERT (This != NULL);

   ASSERT (AcpiTableInfo != NULL);

   ASSERT (CfgMgrProtocol != NULL);

   ASSERT (Table != NULL);

+  ASSERT (TableCount != NULL);

   ASSERT (AcpiTableInfo->TableGeneratorId == This->GeneratorID);

   ASSERT (AcpiTableInfo->AcpiTableSignature == This->AcpiTableSignature);

 

@@ -155,7 +230,7 @@ BuildSpcrTable (
              CfgMgrProtocol,

              CM_NULL_TOKEN,

              &SerialPortInfo,

-             NULL

+             &SerialPortCount

              );

   if (EFI_ERROR (Status)) {

     DEBUG ((

@@ -163,44 +238,46 @@ BuildSpcrTable (
       "ERROR: SPCR: Failed to get serial port information. Status = %r\n",

       Status

       ));

-    goto error_handler;

+    return Status;

   }

 

-  if (SerialPortInfo->BaseAddress == 0) {

-    Status = EFI_INVALID_PARAMETER;

+  if (SerialPortCount == 0) {

     DEBUG ((

       DEBUG_ERROR,

-      "ERROR: SPCR: Uart port base address is invalid. BaseAddress = 0x%lx\n",

-      SerialPortInfo->BaseAddress

+      "ERROR: SPCR: Serial port information not found. Status = %r\n",

+      EFI_NOT_FOUND

       ));

-    goto error_handler;

+    return EFI_NOT_FOUND;

   }

 

-  if ((SerialPortInfo->PortSubtype !=

-      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART) &&

-      (SerialPortInfo->PortSubtype !=

-      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART_2X) &&

-      (SerialPortInfo->PortSubtype !=

-      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART) &&

-      (SerialPortInfo->PortSubtype !=

-      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_FULL_16550) &&

-      (SerialPortInfo->PortSubtype !=

-      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_DCC)) {

-    Status = EFI_INVALID_PARAMETER;

+  // Validate the SerialPort info. Only one SPCR port can be described.

+  // If platform provides description for multiple SPCR ports, use the

+  // first SPCR port information.

+  Status = ValidateSerialPortInfo (SerialPortInfo, 1);

+  if (EFI_ERROR (Status)) {

     DEBUG ((

       DEBUG_ERROR,

-      "ERROR: SPCR: Uart port subtype is invalid. PortSubtype = 0x%x\n",

-      SerialPortInfo->PortSubtype

+      "ERROR: SPCR: Invalid serial port information. Status = %r\n",

+      Status

       ));

-    goto error_handler;

+    return Status;

   }

 

-  DEBUG ((DEBUG_INFO, "SPCR UART Configuration:\n"));

-  DEBUG ((DEBUG_INFO, "  UART Base  = 0x%lx\n", SerialPortInfo->BaseAddress));

-  DEBUG ((DEBUG_INFO, "  Clock      = %d\n", SerialPortInfo->Clock));

-  DEBUG ((DEBUG_INFO, "  Baudrate   = %ld\n", SerialPortInfo->BaudRate));

-  DEBUG ((DEBUG_INFO, "  Interrupt  = %d\n", SerialPortInfo->Interrupt));

+  // Allocate a table to store pointers to the SPCR and SSDT tables.

+  TableList = (EFI_ACPI_DESCRIPTION_HEADER**)

+              AllocateZeroPool (sizeof (EFI_ACPI_DESCRIPTION_HEADER*) * 2);

+  if (TableList == NULL) {

+    Status = EFI_OUT_OF_RESOURCES;

+    DEBUG ((

+      DEBUG_ERROR,

+      "ERROR: SPCR: Failed to allocate memory for Table List," \

+      " Status = %r\n",

+      Status

+      ));

+    return Status;

+  }

 

+  // Build SPCR table.

   Status = AddAcpiHeader (

              CfgMgrProtocol,

              This,

@@ -267,9 +344,35 @@ BuildSpcrTable (
       goto error_handler;

   } // switch

 

-  *Table = (EFI_ACPI_DESCRIPTION_HEADER*)&AcpiSpcr;

+  TableList[0] = (EFI_ACPI_DESCRIPTION_HEADER*)&AcpiSpcr;

+

+  // Build a SSDT table describing the serial port.

+  Status = BuildSsdtSerialPortTable (

+             AcpiTableInfo,

+             SerialPortInfo,

+             NAME_STR_SPCR_PORT,

+             UID_SPCR_PORT,

+             &TableList[1]

+             );

+  if (EFI_ERROR (Status)) {

+    DEBUG ((

+      DEBUG_ERROR,

+      "ERROR: SPCR: Failed to build associated SSDT table. Status = %r\n",

+      Status

+      ));

+    goto error_handler;

+  }

+

+  *TableCount = 2;

+  *Table = TableList;

+

+  return Status;

 

 error_handler:

+  if (TableList != NULL) {

+    FreePool (TableList);

+  }

+

   return Status;

 }

 

@@ -287,7 +390,7 @@ ACPI_TABLE_GENERATOR SpcrGenerator = {
   // Generator Description

   L"ACPI.STD.SPCR.GENERATOR",

   // ACPI Table Signature

-  EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,

+  EFI_ACPI_6_3_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,

   // ACPI Table Revision supported by this Generator

   EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_REVISION,

   // Minimum supported ACPI Table Revision

@@ -296,16 +399,14 @@ ACPI_TABLE_GENERATOR SpcrGenerator = {
   TABLE_GENERATOR_CREATOR_ID_ARM,

   // Creator Revision

   SPCR_GENERATOR_REVISION,

-  // Build Table function

-  BuildSpcrTable,

-  // No additional resources are allocated by the generator.

-  // Hence the Free Resource function is not required.

+  // Build table function. Use the extended version instead.

   NULL,

-  // Extended build function not needed

+  // Free table function. Use the extended version instead.

   NULL,

-  // Extended build function not implemented by the generator.

-  // Hence extended free resource function is not required.

-  NULL

+  // Extended Build table function.

+  BuildSpcrTableEx,

+  // Extended free function.

+  FreeSpcrTableEx

 };

 

 /** Register the Generator with the ACPI Table Factory.