diff options
author | niruiyu <niruiyu@6f19259b-4bc3-4df7-8a09-765794883524> | 2010-01-28 03:07:36 +0000 |
---|---|---|
committer | niruiyu <niruiyu@6f19259b-4bc3-4df7-8a09-765794883524> | 2010-01-28 03:07:36 +0000 |
commit | fee4cb816c9e7ecb23038d0df74cc781631e9306 (patch) | |
tree | 6905a543827935b79ed92d7277b609155a4be1da /DuetPkg/CpuDxe | |
parent | 5270672ca921158c0fe1a439d972ac2a001b55a0 (diff) | |
download | edk2-fee4cb816c9e7ecb23038d0df74cc781631e9306.zip edk2-fee4cb816c9e7ecb23038d0df74cc781631e9306.tar.gz edk2-fee4cb816c9e7ecb23038d0df74cc781631e9306.tar.bz2 |
Fix the issue GCC DUET x64 cannot boot to front page but reset when timer interrupt is enabled (HSD 203180).
I created the correct IDT and GDT which was wrongly created before.
Comments were updated to reflect the actual meaning of the code and IDT alignment was set to 8 byte.
Some unnecessary alginments were removed.
DUET x64 MSFT and GCC both can boot to front page now.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9845 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'DuetPkg/CpuDxe')
-rwxr-xr-x | DuetPkg/CpuDxe/X64/CpuInterrupt.S | 252 | ||||
-rw-r--r-- | DuetPkg/CpuDxe/X64/CpuInterrupt.asm | 59 |
2 files changed, 200 insertions, 111 deletions
diff --git a/DuetPkg/CpuDxe/X64/CpuInterrupt.S b/DuetPkg/CpuDxe/X64/CpuInterrupt.S index 61de8e8..eb92bc8 100755 --- a/DuetPkg/CpuDxe/X64/CpuInterrupt.S +++ b/DuetPkg/CpuDxe/X64/CpuInterrupt.S @@ -1,6 +1,6 @@ #------------------------------------------------------------------------------
#*
-#* Copyright 2006, Intel Corporation
+#* Copyright 2006 - 2010, Intel Corporation
#* All rights reserved. This program and the accompanying materials
#* are licensed and made available under the terms and conditions of the BSD License
#* which accompanies this distribution. The full text of the license may be found at
@@ -204,6 +204,7 @@ INT19: INTUnknown:
# The following segment repeats (32 - 20) times:
+ # macro .rept isn't used here because Apple GAS compiler doesn't support it.
# No. 1
push $0x0 # push error code place holder on the stack
# push xxh # push vector number
@@ -429,7 +430,6 @@ ExceptionDone: addq $(4*8+8), %rsp
cli
-
## UINT64 ExceptionData#
addq $8, %rsp
@@ -520,28 +520,27 @@ ExceptionDone: ##############################################################################
.data
- .p2align 4
gdtr: .short GDT_END - GDT_BASE - 1 # GDT limit
- .quad 0 # (GDT base gets set above)
+ .quad 0 # (GDT base gets set above)
##############################################################################
# global descriptor table (GDT)
##############################################################################
- .p2align 4
+ .p2align 4 # make GDT 16-byte align
GDT_BASE:
# null descriptor
-NULL_SEL = .-GDT_BASE
- .short 0 # limit 15:0
- .short 0 # base 15:0
- .byte 0 # base 23:16
- .byte 0 # type
- .byte 0 # limit 19:16, flags
- .byte 0 # base 31:24
+NULL_SEL = .-GDT_BASE # Selector [0x0]
+ .short 0 # limit 15:0
+ .short 0 # base 15:0
+ .byte 0 # base 23:16
+ .byte 0 # type
+ .byte 0 # limit 19:16, flags
+ .byte 0 # base 31:24
# linear data segment descriptor
-LINEAR_SEL = .-GDT_BASE
+LINEAR_SEL = .-GDT_BASE # Selector [0x8]
.short 0x0FFFF # limit 0xFFFFF
.short 0 # base 0
.byte 0
@@ -550,16 +549,16 @@ LINEAR_SEL = .-GDT_BASE .byte 0
# linear code segment descriptor
-LINEAR_CODE_SEL = .-GDT_BASE
+LINEAR_CODE_SEL = .-GDT_BASE # Selector [0x10]
.short 0x0FFFF # limit 0xFFFFF
.short 0 # base 0
.byte 0
- .byte 0x09A # present, ring 0, data, expand-up, writable
+ .byte 0x09A # present, ring 0, code, expand-up, writable
.byte 0x0CF # page-granular, 32-bit
.byte 0
# system data segment descriptor
-SYS_DATA_SEL = .-GDT_BASE
+SYS_DATA_SEL = .-GDT_BASE # Selector [0x18]
.short 0x0FFFF # limit 0xFFFFF
.short 0 # base 0
.byte 0
@@ -568,49 +567,54 @@ SYS_DATA_SEL = .-GDT_BASE .byte 0
# system code segment descriptor
-SYS_CODE_SEL = .-GDT_BASE
+SYS_CODE_SEL = .-GDT_BASE # Selector [0x20]
.short 0x0FFFF # limit 0xFFFFF
.short 0 # base 0
.byte 0
- .byte 0x09A # present, ring 0, data, expand-up, writable
+ .byte 0x09A # present, ring 0, code, expand-up, writable
.byte 0x0CF # page-granular, 32-bit
.byte 0
# spare segment descriptor
-SPARE3_SEL = .-GDT_BASE
- .short 0 # limit 0xFFFFF
+SPARE3_SEL = .-GDT_BASE # Selector [0x28]
+ .short 0
+ .short 0
+ .byte 0
+ .byte 0
+ .byte 0
+ .byte 0
+
+# system data segment descriptor
+SYS_DATA64_SEL = .-GDT_BASE # Selector [0x30]
+ .short 0x0FFFF # limit 0xFFFFF
.short 0 # base 0
.byte 0
- .byte 0 # present, ring 0, data, expand-up, writable
- .byte 0 # page-granular, 32-bit
+ .byte 0x092 # present, ring 0, data, expand-up, writable
+ .byte 0x0CF # page-granular, 32-bit
.byte 0
-# spare segment descriptor
-SPARE4_SEL = .-GDT_BASE
- .short 0 # limit 0xFFFFF
+# system code segment descriptor
+SYS_CODE64_SEL = .-GDT_BASE # Selector [0x38]
+ .short 0x0FFFF # limit 0xFFFFF
.short 0 # base 0
.byte 0
- .byte 0 # present, ring 0, data, expand-up, writable
- .byte 0 # page-granular, 32-bit
+ .byte 0x09A # present, ring 0, code, expand-up, writable
+ .byte 0x0AF # page-granular, 64-bit
.byte 0
# spare segment descriptor
-SPARE5_SEL = .-GDT_BASE
- .short 0 # limit 0xFFFFF
- .short 0 # base 0
+SPARE4_SEL = .-GDT_BASE # Selector [0x40]
+ .short 0
+ .short 0
+ .byte 0
+ .byte 0
.byte 0
- .byte 0 # present, ring 0, data, expand-up, writable
- .byte 0 # page-granular, 32-bit
.byte 0
GDT_END:
- .p2align 2
-
-
-
idtr: .short IDT_END - IDT_BASE - 1 # IDT limit
- .quad 0 # (IDT base gets set above)
+ .quad 0 # (IDT base gets set above)
##############################################################################
# interrupt descriptor table (IDT)
#
@@ -620,375 +624,471 @@ idtr: .short IDT_END - IDT_BASE - 1 # IDT limit # for convenience.
##############################################################################
-#idt_tag .byte "IDT",0
- .p2align 2
+ .p2align 3 # make IDT 8-byte align
IDT_BASE:
# divide by zero (INT 0)
DIV_ZERO_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# debug exception (INT 1)
DEBUG_EXCEPT_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# NMI (INT 2)
NMI_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# soft breakpoint (INT 3)
BREAKPOINT_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# overflow (INT 4)
OVERFLOW_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# bounds check (INT 5)
BOUNDS_CHECK_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# invalid opcode (INT 6)
INVALID_OPCODE_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# device not available (INT 7)
DEV_NOT_AVAIL_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# double fault (INT 8)
DOUBLE_FAULT_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# Coprocessor segment overrun - reserved (INT 9)
RSVD_INTR_SEL1 = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# invalid TSS (INT 0ah)
INVALID_TSS_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# segment not present (INT 0bh)
SEG_NOT_PRESENT_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# stack fault (INT 0ch)
STACK_FAULT_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# general protection (INT 0dh)
GP_FAULT_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# page fault (INT 0eh)
PAGE_FAULT_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# Intel reserved - do not use (INT 0fh)
RSVD_INTR_SEL2 = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# floating point error (INT 0x10)
FLT_POINT_ERR_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# alignment check (INT 0x11)
ALIGNMENT_CHECK_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# machine check (INT 0x12)
MACHINE_CHECK_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# SIMD floating-point exception (INT 0x13)
SIMD_EXCEPTION_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# The following segment repeats (32 - 20) times:
+ # macro .rept isn't used here because Apple GAS compiler doesn't support it.
# No. 1
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 2
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 3
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 4
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 5
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 6
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 7
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 8
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 9
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 10
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 11
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# No. 12
.short 0 # offset 15:0
.short SYS_CODE_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# 72 unspecified descriptors
- .fill 72 * 8, 1, 0
+ .fill 72 * 16, 1, 0
# IRQ 0 (System timer) - (INT 0x68)
IRQ0_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # 0 for reserved
# IRQ 1 (8042 Keyboard controller) - (INT 0x69)
IRQ1_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# Reserved - IRQ 2 redirect (IRQ 2) - DO NOT USE!!! - (INT 6ah)
IRQ2_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 3 (COM 2) - (INT 6bh)
IRQ3_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 4 (COM 1) - (INT 6ch)
IRQ4_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 5 (LPT 2) - (INT 6dh)
IRQ5_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 6 (Floppy controller) - (INT 6eh)
IRQ6_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 7 (LPT 1) - (INT 6fh)
IRQ7_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 8 (RTC Alarm) - (INT 0x70)
IRQ8_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 9 - (INT 0x71)
IRQ9_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 10 - (INT 0x72)
IRQ10_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 11 - (INT 0x73)
IRQ11_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 12 (PS/2 mouse) - (INT 0x74)
IRQ12_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 13 (Floating point error) - (INT 0x75)
IRQ13_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 14 (Secondary IDE) - (INT 0x76)
IRQ14_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
# IRQ 15 (Primary IDE) - (INT 0x77)
IRQ15_SEL = .-IDT_BASE
.short 0 # offset 15:0
- .short SYS_CODE_SEL # selector 15:0
+ .short SYS_CODE64_SEL # selector 15:0
.byte 0 # 0 for interrupt gate
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
.short 0 # offset 31:16
+ .long 0 # offset 63:32
+ .long 0 # for reserved
.fill 16, 1, 0
diff --git a/DuetPkg/CpuDxe/X64/CpuInterrupt.asm b/DuetPkg/CpuDxe/X64/CpuInterrupt.asm index acf8605..434a0e8 100644 --- a/DuetPkg/CpuDxe/X64/CpuInterrupt.asm +++ b/DuetPkg/CpuDxe/X64/CpuInterrupt.asm @@ -1,7 +1,7 @@ TITLE CpuInterrupt.asm:
;------------------------------------------------------------------------------
;*
-;* Copyright 2006, Intel Corporation
+;* Copyright 2006 - 2010, Intel Corporation
;* All rights reserved. This program and the accompanying materials
;* are licensed and made available under the terms and conditions of the BSD License
;* which accompanies this distribution. The full text of the license may be found at
@@ -447,7 +447,6 @@ ExceptionDone: ; data
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
- align 010h
gdtr dw GDT_END - GDT_BASE - 1 ; GDT limit
dq 0 ; (GDT base gets set above)
@@ -455,12 +454,12 @@ gdtr dw GDT_END - GDT_BASE - 1 ; GDT limit ; global descriptor table (GDT)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
- align 010h
+ align 010h ; make GDT 16-byte align
public GDT_BASE
GDT_BASE:
; null descriptor
-NULL_SEL equ $-GDT_BASE ; Selector [0x0]
+NULL_SEL equ $-GDT_BASE ; Selector [0x0]
dw 0 ; limit 15:0
dw 0 ; base 15:0
db 0 ; base 23:16
@@ -474,7 +473,7 @@ LINEAR_SEL equ $-GDT_BASE ; Selector [0x8] dw 0 ; base 0
db 0
db 092h ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
+ db 0CFh ; page-granular, 32-bit
db 0
; linear code segment descriptor
@@ -482,8 +481,8 @@ LINEAR_CODE_SEL equ $-GDT_BASE ; Selector [0x10] dw 0FFFFh ; limit 0xFFFFF
dw 0 ; base 0
db 0
- db 09Ah ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
+ db 09Ah ; present, ring 0, code, expand-up, writable
+ db 0CFh ; page-granular, 32-bit
db 0
; system data segment descriptor
@@ -492,7 +491,7 @@ SYS_DATA_SEL equ $-GDT_BASE ; Selector [0x18] dw 0 ; base 0
db 0
db 092h ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
+ db 0CFh ; page-granular, 32-bit
db 0
; system code segment descriptor
@@ -500,56 +499,48 @@ SYS_CODE_SEL equ $-GDT_BASE ; Selector [0x20] dw 0FFFFh ; limit 0xFFFFF
dw 0 ; base 0
db 0
- db 09Ah ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
+ db 09Ah ; present, ring 0, code, expand-up, writable
+ db 0CFh ; page-granular, 32-bit
db 0
; spare segment descriptor
-SPARE3_SEL equ $-GDT_BASE ; Selector [0x28]
- dw 0 ; limit 0xFFFFF
- dw 0 ; base 0
+SPARE3_SEL equ $-GDT_BASE ; Selector [0x28]
+ dw 0
+ dw 0
+ db 0
+ db 0
db 0
- db 0 ; present, ring 0, data, expand-up, writable
- db 0 ; page-granular, 32-bit
db 0
-;
; system data segment descriptor
-;
SYS_DATA64_SEL equ $-GDT_BASE ; Selector [0x30]
dw 0FFFFh ; limit 0xFFFFF
dw 0 ; base 0
db 0
- db 092h ; P | DPL [1..2] | 1 | 1 | C | R | A
- db 0CFh ; G | D | L | AVL | Segment [19..16]
+ db 092h ; present, ring 0, data, expand-up, writable
+ db 0CFh ; page-granular, 32-bit
db 0
-;
; system code segment descriptor
-;
SYS_CODE64_SEL equ $-GDT_BASE ; Selector [0x38]
dw 0FFFFh ; limit 0xFFFFF
dw 0 ; base 0
db 0
- db 09Ah ; P | DPL [1..2] | 1 | 1 | C | R | A
- db 0AFh ; G | D | L | AVL | Segment [19..16]
+ db 09Ah ; present, ring 0, code, expand-up, writable
+ db 0AFh ; page-granular, 64-bit
db 0
; spare segment descriptor
SPARE4_SEL equ $-GDT_BASE ; Selector [0x40]
- dw 0 ; limit 0xFFFFF
- dw 0 ; base 0
+ dw 0
+ dw 0
+ db 0
+ db 0
db 0
- db 0 ; present, ring 0, data, expand-up, writable
- db 0 ; page-granular, 32-bit
db 0
GDT_END:
- align 02h
-
-
-
idtr dw IDT_END - IDT_BASE - 1 ; IDT limit
dq 0 ; (IDT base gets set above)
@@ -562,8 +553,7 @@ idtr dw IDT_END - IDT_BASE - 1 ; IDT limit ; for convenience.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;idt_tag db "IDT",0
- align 02h
+ align 08h ; make IDT 8-byte align
public IDT_BASE
IDT_BASE:
@@ -767,7 +757,7 @@ SIMD_EXCEPTION_SEL equ $-IDT_BASE dd 0 ; offset 63:32
dd 0 ; 0 for reserved
-REPEAT (32 - 20)
+REPEAT (32 - 20)
dw 0 ; offset 15:0
dw SYS_CODE64_SEL ; selector 15:0
db 0 ; 0 for interrupt gate
@@ -944,6 +934,5 @@ IRQ15_SEL equ $-IDT_BASE IDT_END:
- align 02h
END
|